/** @file\r
Serial driver for standard UARTS on an ISA bus.\r
\r
-Copyright (c) 2006 - 2009, Intel Corporation<BR>\r
+Copyright (c) 2006 - 2010, Intel Corporation<BR>\r
All rights reserved. This program and the accompanying materials\r
are licensed and made available under the terms and conditions of the BSD License\r
which accompanies this distribution. The full text of the license may be found at\r
NULL\r
},\r
{ // SerialMode\r
- SERIAL_PORT_DEFAULT_CONTROL_MASK,\r
+ SERIAL_PORT_SUPPORT_CONTROL_MASK,\r
SERIAL_PORT_DEFAULT_TIMEOUT,\r
FixedPcdGet64 (PcdUartDefaultBaudRate), // BaudRate\r
SERIAL_PORT_DEFAULT_RECEIVE_FIFO_DEPTH,\r
NULL\r
};\r
\r
+/**\r
+ Check the device path node whether it's the Flow Control node or not.\r
+\r
+ @param[in] FlowControl The device path node to be checked.\r
+ \r
+ @retval TRUE It's the Flow Control node.\r
+ @retval FALSE It's not.\r
+\r
+**/\r
+BOOLEAN\r
+IsUartFlowControlNode (\r
+ IN UART_FLOW_CONTROL_DEVICE_PATH *FlowControl\r
+ )\r
+{\r
+ return (BOOLEAN) (\r
+ (DevicePathType (FlowControl) == MESSAGING_DEVICE_PATH) &&\r
+ (DevicePathSubType (FlowControl) == MSG_VENDOR_DP) &&\r
+ (CompareGuid (&FlowControl->Guid, &gEfiUartDevicePathGuid))\r
+ );\r
+}\r
+\r
+/**\r
+ Check the device path node whether it contains Flow Control node or not.\r
+\r
+ @param[in] DevicePath The device path to be checked.\r
+ \r
+ @retval TRUE It contains the Flow Control node.\r
+ @retval FALSE It doesn't.\r
+\r
+**/\r
+BOOLEAN\r
+ContainsFlowControl (\r
+ IN EFI_DEVICE_PATH_PROTOCOL *DevicePath\r
+ )\r
+{\r
+ while (!IsDevicePathEnd (DevicePath)) {\r
+ if (IsUartFlowControlNode ((UART_FLOW_CONTROL_DEVICE_PATH *) DevicePath)) {\r
+ return TRUE;\r
+ }\r
+ DevicePath = NextDevicePathNode (DevicePath);\r
+ }\r
+\r
+ return FALSE;\r
+}\r
+\r
/**\r
The user Entry Point for module IsaSerial. The user code starts with this function.\r
\r
EFI_STATUS Status;\r
EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath;\r
EFI_ISA_IO_PROTOCOL *IsaIo;\r
- UART_DEVICE_PATH UartNode;\r
+ UART_DEVICE_PATH *UartNode;\r
+ EFI_DEVICE_PATH_PROTOCOL *DevicePath;\r
+ UART_FLOW_CONTROL_DEVICE_PATH *FlowControlNode;\r
+ EFI_OPEN_PROTOCOL_INFORMATION_ENTRY *OpenInfoBuffer;\r
+ UINTN EntryCount;\r
+ UINTN Index;\r
+ BOOLEAN HasFlowControl;\r
\r
//\r
- // Ignore the RemainingDevicePath\r
+ // Check RemainingDevicePath validation\r
//\r
+ if (RemainingDevicePath != NULL) {\r
+ //\r
+ // Check if RemainingDevicePath is the End of Device Path Node, \r
+ // if yes, go on checking other conditions\r
+ //\r
+ if (!IsDevicePathEnd (RemainingDevicePath)) {\r
+ //\r
+ // If RemainingDevicePath isn't the End of Device Path Node,\r
+ // check its validation\r
+ //\r
+ Status = EFI_UNSUPPORTED;\r
+\r
+ UartNode = (UART_DEVICE_PATH *) RemainingDevicePath;\r
+ if (UartNode->Header.Type != MESSAGING_DEVICE_PATH ||\r
+ UartNode->Header.SubType != MSG_UART_DP ||\r
+ sizeof (UART_DEVICE_PATH) != DevicePathNodeLength ((EFI_DEVICE_PATH_PROTOCOL *) UartNode)\r
+ ) {\r
+ goto Error;\r
+ }\r
+ \r
+ if (UartNode->BaudRate > SERIAL_PORT_MAX_BAUD_RATE) {\r
+ goto Error;\r
+ }\r
+ \r
+ if (UartNode->Parity < NoParity || UartNode->Parity > SpaceParity) {\r
+ goto Error;\r
+ }\r
+ \r
+ if (UartNode->DataBits < 5 || UartNode->DataBits > 8) {\r
+ goto Error;\r
+ }\r
+ \r
+ if (UartNode->StopBits < OneStopBit || UartNode->StopBits > TwoStopBits) {\r
+ goto Error;\r
+ }\r
+ \r
+ if ((UartNode->DataBits == 5) && (UartNode->StopBits == TwoStopBits)) {\r
+ goto Error;\r
+ }\r
+ \r
+ if ((UartNode->DataBits >= 6) && (UartNode->DataBits <= 8) && (UartNode->StopBits == OneFiveStopBits)) {\r
+ goto Error;\r
+ }\r
+\r
+ FlowControlNode = (UART_FLOW_CONTROL_DEVICE_PATH *) NextDevicePathNode (UartNode);\r
+ if (IsUartFlowControlNode (FlowControlNode)) {\r
+ //\r
+ // If the second node is Flow Control Node,\r
+ // return error when it request other than hardware flow control.\r
+ //\r
+ if ((ReadUnaligned32 (&FlowControlNode->FlowControlMap) & ~UART_FLOW_CONTROL_HARDWARE) != 0) {\r
+ goto Error;\r
+ }\r
+ }\r
+ }\r
+ }\r
+\r
//\r
// Open the IO Abstraction(s) needed to perform the supported test\r
//\r
Status = gBS->OpenProtocol (\r
Controller,\r
- &gEfiDevicePathProtocolGuid,\r
- (VOID **) &ParentDevicePath,\r
+ &gEfiIsaIoProtocolGuid,\r
+ (VOID **) &IsaIo,\r
This->DriverBindingHandle,\r
Controller,\r
EFI_OPEN_PROTOCOL_BY_DRIVER\r
);\r
if (Status == EFI_ALREADY_STARTED) {\r
- return EFI_SUCCESS;\r
+ if (RemainingDevicePath == NULL || IsDevicePathEnd (RemainingDevicePath)) {\r
+ //\r
+ // If RemainingDevicePath is NULL or is the End of Device Path Node\r
+ //\r
+ return EFI_SUCCESS;\r
+ }\r
+ //\r
+ // When the driver has produced device path with flow control node but RemainingDevicePath only contains UART node,\r
+ // return unsupported, and vice versa.\r
+ //\r
+ Status = gBS->OpenProtocolInformation (\r
+ Controller,\r
+ &gEfiIsaIoProtocolGuid,\r
+ &OpenInfoBuffer,\r
+ &EntryCount\r
+ );\r
+ if (EFI_ERROR (Status)) {\r
+ return Status;\r
+ }\r
+\r
+ for (Index = 0; Index < EntryCount; Index++) {\r
+ if ((OpenInfoBuffer[Index].Attributes & EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER) != 0) {\r
+ Status = gBS->OpenProtocol (\r
+ OpenInfoBuffer[Index].ControllerHandle,\r
+ &gEfiDevicePathProtocolGuid,\r
+ (VOID **) &DevicePath,\r
+ This->DriverBindingHandle,\r
+ Controller,\r
+ EFI_OPEN_PROTOCOL_GET_PROTOCOL\r
+ );\r
+ if (!EFI_ERROR (Status)) {\r
+ HasFlowControl = ContainsFlowControl (RemainingDevicePath);\r
+ if (HasFlowControl ^ ContainsFlowControl (DevicePath)) {\r
+ Status = EFI_UNSUPPORTED;\r
+ }\r
+ }\r
+ break;\r
+ }\r
+ }\r
+ FreePool (OpenInfoBuffer);\r
+ return Status;\r
}\r
\r
if (EFI_ERROR (Status)) {\r
return Status;\r
}\r
\r
+ //\r
+ // Close the I/O Abstraction(s) used to perform the supported test\r
+ //\r
gBS->CloseProtocol (\r
Controller,\r
- &gEfiDevicePathProtocolGuid,\r
+ &gEfiIsaIoProtocolGuid,\r
This->DriverBindingHandle,\r
Controller\r
);\r
\r
+ //\r
+ // Open the EFI Device Path protocol needed to perform the supported test\r
+ //\r
Status = gBS->OpenProtocol (\r
Controller,\r
- &gEfiIsaIoProtocolGuid,\r
- (VOID **) &IsaIo,\r
+ &gEfiDevicePathProtocolGuid,\r
+ (VOID **) &ParentDevicePath,\r
This->DriverBindingHandle,\r
Controller,\r
EFI_OPEN_PROTOCOL_BY_DRIVER\r
);\r
-\r
if (Status == EFI_ALREADY_STARTED) {\r
return EFI_SUCCESS;\r
}\r
Status = EFI_UNSUPPORTED;\r
goto Error;\r
}\r
- //\r
- // Make sure RemainingDevicePath is valid\r
- //\r
- if (RemainingDevicePath != NULL) {\r
- Status = EFI_UNSUPPORTED;\r
- CopyMem (\r
- &UartNode,\r
- (UART_DEVICE_PATH *) RemainingDevicePath,\r
- sizeof (UART_DEVICE_PATH)\r
- );\r
- if (UartNode.Header.Type != MESSAGING_DEVICE_PATH ||\r
- UartNode.Header.SubType != MSG_UART_DP ||\r
- sizeof (UART_DEVICE_PATH) != DevicePathNodeLength ((EFI_DEVICE_PATH_PROTOCOL *) &UartNode)\r
- ) {\r
- goto Error;\r
- }\r
-\r
- if (UartNode.BaudRate > SERIAL_PORT_MAX_BAUD_RATE) {\r
- goto Error;\r
- }\r
-\r
- if (UartNode.Parity < NoParity || UartNode.Parity > SpaceParity) {\r
- goto Error;\r
- }\r
-\r
- if (UartNode.DataBits < 5 || UartNode.DataBits > 8) {\r
- goto Error;\r
- }\r
-\r
- if (UartNode.StopBits < OneStopBit || UartNode.StopBits > TwoStopBits) {\r
- goto Error;\r
- }\r
-\r
- if ((UartNode.DataBits == 5) && (UartNode.StopBits == TwoStopBits)) {\r
- goto Error;\r
- }\r
-\r
- if ((UartNode.DataBits >= 6) && (UartNode.DataBits <= 8) && (UartNode.StopBits == OneFiveStopBits)) {\r
- goto Error;\r
- }\r
-\r
- Status = EFI_SUCCESS;\r
- }\r
\r
Error:\r
//\r
- // Close the I/O Abstraction(s) used to perform the supported test\r
+ // Close protocol, don't use device path protocol in the Support() function\r
//\r
gBS->CloseProtocol (\r
Controller,\r
- &gEfiIsaIoProtocolGuid,\r
+ &gEfiDevicePathProtocolGuid,\r
This->DriverBindingHandle,\r
Controller\r
);\r
EFI_ISA_IO_PROTOCOL *IsaIo;\r
SERIAL_DEV *SerialDevice;\r
UINTN Index;\r
- UART_DEVICE_PATH Node;\r
EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath;\r
EFI_OPEN_PROTOCOL_INFORMATION_ENTRY *OpenInfoBuffer;\r
UINTN EntryCount;\r
EFI_SERIAL_IO_PROTOCOL *SerialIo;\r
+ UART_DEVICE_PATH *Uart;\r
+ UINT32 FlowControlMap;\r
+ UART_FLOW_CONTROL_DEVICE_PATH *FlowControl;\r
+ EFI_DEVICE_PATH_PROTOCOL *TempDevicePath;\r
+ UINT32 Control;\r
\r
SerialDevice = NULL;\r
//\r
\r
if (Status == EFI_ALREADY_STARTED) {\r
\r
- if (RemainingDevicePath == NULL) {\r
+ if (RemainingDevicePath == NULL || IsDevicePathEnd (RemainingDevicePath)) {\r
+ //\r
+ // If RemainingDevicePath is NULL or is the End of Device Path Node\r
+ //\r
return EFI_SUCCESS;\r
}\r
+\r
//\r
// Make sure a child handle does not already exist. This driver can only\r
// produce one child per serial port.\r
\r
Status = EFI_ALREADY_STARTED;\r
for (Index = 0; Index < EntryCount; Index++) {\r
- if (OpenInfoBuffer[Index].Attributes & EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER) {\r
+ if ((OpenInfoBuffer[Index].Attributes & EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER) != 0) {\r
Status = gBS->OpenProtocol (\r
OpenInfoBuffer[Index].ControllerHandle,\r
&gEfiSerialIoProtocolGuid,\r
EFI_OPEN_PROTOCOL_GET_PROTOCOL\r
);\r
if (!EFI_ERROR (Status)) {\r
- CopyMem (&Node, RemainingDevicePath, sizeof (UART_DEVICE_PATH));\r
+ Uart = (UART_DEVICE_PATH *) RemainingDevicePath;\r
Status = SerialIo->SetAttributes (\r
SerialIo,\r
- Node.BaudRate,\r
+ Uart->BaudRate,\r
SerialIo->Mode->ReceiveFifoDepth,\r
SerialIo->Mode->Timeout,\r
- (EFI_PARITY_TYPE) Node.Parity,\r
- Node.DataBits,\r
- (EFI_STOP_BITS_TYPE) Node.StopBits\r
+ (EFI_PARITY_TYPE) Uart->Parity,\r
+ Uart->DataBits,\r
+ (EFI_STOP_BITS_TYPE) Uart->StopBits\r
);\r
+\r
+ FlowControl = (UART_FLOW_CONTROL_DEVICE_PATH *) NextDevicePathNode (Uart);\r
+ if (!EFI_ERROR (Status) && IsUartFlowControlNode (FlowControl)) {\r
+ Status = SerialIo->GetControl (SerialIo, &Control);\r
+ if (!EFI_ERROR (Status)) {\r
+ if (ReadUnaligned32 (&FlowControl->FlowControlMap) == UART_FLOW_CONTROL_HARDWARE) {\r
+ Control |= EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE;\r
+ } else {\r
+ Control &= ~EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE;\r
+ }\r
+ //\r
+ // Clear the bits that are not allowed to pass to SetControl\r
+ //\r
+ Control &= (EFI_SERIAL_REQUEST_TO_SEND | EFI_SERIAL_DATA_TERMINAL_READY |\r
+ EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE | EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE | \r
+ EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE);\r
+ Status = SerialIo->SetControl (SerialIo, Control);\r
+ }\r
+ }\r
}\r
break;\r
}\r
}\r
\r
- gBS->FreePool (OpenInfoBuffer);\r
+ FreePool (OpenInfoBuffer);\r
return Status;\r
}\r
+\r
+ if (RemainingDevicePath != NULL) {\r
+ if (IsDevicePathEnd (RemainingDevicePath)) {\r
+ //\r
+ // If RemainingDevicePath is the End of Device Path Node,\r
+ // skip enumerate any device and return EFI_SUCESSS\r
+ // \r
+ return EFI_SUCCESS;\r
+ }\r
+ }\r
+\r
//\r
// Initialize the serial device instance\r
//\r
SerialDevice->SerialIo.Mode = &(SerialDevice->SerialMode);\r
SerialDevice->IsaIo = IsaIo;\r
SerialDevice->ParentDevicePath = ParentDevicePath;\r
+ FlowControl = NULL;\r
+ FlowControlMap = 0;\r
+\r
+ //\r
+ // Check if RemainingDevicePath is NULL, \r
+ // if yes, use the values from the gSerialDevTempate as no remaining device path was\r
+ // passed in.\r
+ //\r
+ if (RemainingDevicePath != NULL) {\r
+ //\r
+ // If RemainingDevicePath isn't NULL, \r
+ // match the configuration of the RemainingDevicePath. IsHandleSupported()\r
+ // already checked to make sure the RemainingDevicePath contains settings\r
+ // that we can support.\r
+ //\r
+ CopyMem (&SerialDevice->UartDevicePath, RemainingDevicePath, sizeof (UART_DEVICE_PATH));\r
+ FlowControl = (UART_FLOW_CONTROL_DEVICE_PATH *) NextDevicePathNode (RemainingDevicePath);\r
+ if (IsUartFlowControlNode (FlowControl)) {\r
+ FlowControlMap = ReadUnaligned32 (&FlowControl->FlowControlMap);\r
+ } else {\r
+ FlowControl = NULL;\r
+ }\r
+ }\r
\r
AddName (SerialDevice, IsaIo);\r
\r
SerialDevice->BaseAddress = (UINT16) SerialDevice->IsaIo->ResourceList->ResourceItem[Index].StartRange;\r
}\r
}\r
+ \r
+ SerialDevice->HardwareFlowControl = (BOOLEAN) (FlowControlMap == UART_FLOW_CONTROL_HARDWARE);\r
+\r
//\r
// Report status code the serial present\r
//\r
goto Error;\r
}\r
\r
- if (RemainingDevicePath != NULL) {\r
- //\r
- // Match the configuration of the RemainingDevicePath. IsHandleSupported()\r
- // already checked to make sure the RemainingDevicePath contains settings\r
- // that we can support.\r
- //\r
- CopyMem (&SerialDevice->UartDevicePath, RemainingDevicePath, sizeof (UART_DEVICE_PATH));\r
- } else {\r
- //\r
- // Use the values from the gSerialDevTempate as no remaining device path was\r
- // passed in.\r
- //\r
- }\r
//\r
- // Build the device path by appending the UART node to the ParentDevicePath\r
- // from the WinNtIo handle. The Uart setings are zero here, since\r
- // SetAttribute() will update them to match the current setings.\r
+ // Build the device path by appending the UART node to the ParentDevicePath.\r
+ // The Uart setings are zero here, since SetAttribute() will update them to match \r
+ // the default setings.\r
//\r
SerialDevice->DevicePath = AppendDevicePathNode (\r
ParentDevicePath,\r
- (EFI_DEVICE_PATH_PROTOCOL *)&SerialDevice->UartDevicePath\r
+ (EFI_DEVICE_PATH_PROTOCOL *) &SerialDevice->UartDevicePath\r
);\r
+ //\r
+ // Only produce the Flow Control node when remaining device path has it\r
+ //\r
+ if (FlowControl != NULL) {\r
+ TempDevicePath = SerialDevice->DevicePath;\r
+ if (TempDevicePath != NULL) {\r
+ SerialDevice->DevicePath = AppendDevicePathNode (\r
+ TempDevicePath,\r
+ (EFI_DEVICE_PATH_PROTOCOL *) FlowControl\r
+ );\r
+ FreePool (TempDevicePath);\r
+ }\r
+ }\r
if (SerialDevice->DevicePath == NULL) {\r
- Status = EFI_DEVICE_ERROR;\r
+ Status = EFI_OUT_OF_RESOURCES;\r
goto Error;\r
}\r
\r
} while (!IsaSerialFifoEmpty (&SerialDevice->Transmit));\r
} else {\r
ReceiveFifoFull = IsaSerialFifoFull (&SerialDevice->Receive);\r
+ //\r
+ // For full handshake flow control, tell the peer to send data\r
+ // if receive buffer is available.\r
+ //\r
+ if (SerialDevice->HardwareFlowControl &&\r
+ !FeaturePcdGet(PcdIsaBusSerialUseHalfHandshake)&&\r
+ !ReceiveFifoFull\r
+ ) {\r
+ Mcr.Data = READ_MCR (SerialDevice->IsaIo, SerialDevice->BaseAddress);\r
+ Mcr.Bits.Rts = 1;\r
+ WRITE_MCR (SerialDevice->IsaIo, SerialDevice->BaseAddress, Mcr.Data);\r
+ }\r
do {\r
Lsr.Data = READ_LSR (SerialDevice->IsaIo, SerialDevice->BaseAddress);\r
\r
continue;\r
}\r
}\r
- //\r
- // Make sure the receive data will not be missed, Assert DTR\r
- //\r
- if (SerialDevice->HardwareFlowControl) {\r
- Mcr.Data = READ_MCR (SerialDevice->IsaIo, SerialDevice->BaseAddress);\r
- Mcr.Bits.DtrC &= 0;\r
- WRITE_MCR (SerialDevice->IsaIo, SerialDevice->BaseAddress, Mcr.Data);\r
- }\r
\r
Data = READ_RBR (SerialDevice->IsaIo, SerialDevice->BaseAddress);\r
\r
+ IsaSerialFifoAdd (&SerialDevice->Receive, Data);\r
+ \r
//\r
- // Deassert DTR\r
+ // For full handshake flow control, if receive buffer full\r
+ // tell the peer to stop sending data.\r
//\r
- if (SerialDevice->HardwareFlowControl) {\r
- Mcr.Data = READ_MCR (SerialDevice->IsaIo, SerialDevice->BaseAddress);\r
- Mcr.Bits.DtrC |= 1;\r
+ if (SerialDevice->HardwareFlowControl &&\r
+ !FeaturePcdGet(PcdIsaBusSerialUseHalfHandshake) &&\r
+ IsaSerialFifoFull (&SerialDevice->Receive)\r
+ ) {\r
+ Mcr.Data = READ_MCR (SerialDevice->IsaIo, SerialDevice->BaseAddress);\r
+ Mcr.Bits.Rts = 0;\r
WRITE_MCR (SerialDevice->IsaIo, SerialDevice->BaseAddress, Mcr.Data);\r
}\r
\r
- IsaSerialFifoAdd (&SerialDevice->Receive, Data);\r
\r
continue;\r
} else {\r
//\r
if (SerialDevice->HardwareFlowControl) {\r
//\r
- // Send RTS\r
+ // For half handshake flow control assert RTS before sending.\r
//\r
- Mcr.Data = READ_MCR (SerialDevice->IsaIo, SerialDevice->BaseAddress);\r
- Mcr.Bits.Rts |= 1;\r
- WRITE_MCR (SerialDevice->IsaIo, SerialDevice->BaseAddress, Mcr.Data);\r
+ if (FeaturePcdGet(PcdIsaBusSerialUseHalfHandshake)) {\r
+ Mcr.Data = READ_MCR (SerialDevice->IsaIo, SerialDevice->BaseAddress);\r
+ Mcr.Bits.Rts= 0;\r
+ WRITE_MCR (SerialDevice->IsaIo, SerialDevice->BaseAddress, Mcr.Data);\r
+ }\r
//\r
// Wait for CTS\r
//\r
TimeOut = 0;\r
Msr.Data = READ_MSR (SerialDevice->IsaIo, SerialDevice->BaseAddress);\r
- while (Msr.Bits.Cts == 0) {\r
+ while ((Msr.Bits.Dcd == 1) && ((Msr.Bits.Cts == 0) ^ FeaturePcdGet(PcdIsaBusSerialUseHalfHandshake))) {\r
gBS->Stall (TIMEOUT_STALL_INTERVAL);\r
TimeOut++;\r
if (TimeOut > 5) {\r
Msr.Data = READ_MSR (SerialDevice->IsaIo, SerialDevice->BaseAddress);\r
}\r
\r
- if (Msr.Bits.Cts == 1) {\r
+ if ((Msr.Bits.Dcd == 0) || ((Msr.Bits.Cts == 1) ^ FeaturePcdGet(PcdIsaBusSerialUseHalfHandshake))) {\r
IsaSerialFifoRemove (&SerialDevice->Transmit, &Data);\r
WRITE_THR (SerialDevice->IsaIo, SerialDevice->BaseAddress, Data);\r
}\r
- }\r
- //\r
- // write the data out\r
- //\r
- if (!SerialDevice->HardwareFlowControl) {\r
- IsaSerialFifoRemove (&SerialDevice->Transmit, &Data);\r
- WRITE_THR (SerialDevice->IsaIo, SerialDevice->BaseAddress, Data);\r
- }\r
- //\r
- // Make sure the transmit data will not be missed\r
- //\r
- if (SerialDevice->HardwareFlowControl) {\r
+\r
//\r
- // Assert RTS\r
+ // For half handshake flow control, tell DCE we are done.\r
//\r
- Mcr.Data = READ_MCR (SerialDevice->IsaIo, SerialDevice->BaseAddress);\r
- Mcr.Bits.Rts &= 0;\r
- WRITE_MCR (SerialDevice->IsaIo, SerialDevice->BaseAddress, Mcr.Data);\r
+ if (FeaturePcdGet(PcdIsaBusSerialUseHalfHandshake)) {\r
+ Mcr.Data = READ_MCR (SerialDevice->IsaIo, SerialDevice->BaseAddress);\r
+ Mcr.Bits.Rts = 1;\r
+ WRITE_MCR (SerialDevice->IsaIo, SerialDevice->BaseAddress, Mcr.Data);\r
+ }\r
+ } else {\r
+ IsaSerialFifoRemove (&SerialDevice->Transmit, &Data);\r
+ WRITE_THR (SerialDevice->IsaIo, SerialDevice->BaseAddress, Data);\r
}\r
}\r
} while (Lsr.Bits.Thre == 1 && !IsaSerialFifoEmpty (&SerialDevice->Transmit));\r
SERIAL_PORT_MCR Mcr;\r
SERIAL_PORT_FCR Fcr;\r
EFI_TPL Tpl;\r
+ UINT32 Control;\r
\r
SerialDevice = SERIAL_DEV_FROM_THIS (This);\r
\r
//\r
// Go set the current control bits\r
//\r
+ Control = 0;\r
+ if (SerialDevice->HardwareFlowControl) {\r
+ Control |= EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE;\r
+ }\r
+ if (SerialDevice->SoftwareLoopbackEnable) {\r
+ Control |= EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE;\r
+ }\r
Status = This->SetControl (\r
This,\r
- This->Mode->ControlMask\r
+ Control\r
);\r
\r
if (EFI_ERROR (Status)) {\r
UINT32 Divisor;\r
UINT32 Remained;\r
SERIAL_PORT_LCR Lcr;\r
- EFI_DEVICE_PATH_PROTOCOL *NewDevicePath;\r
+ UART_DEVICE_PATH *Uart;\r
EFI_TPL Tpl;\r
\r
SerialDevice = SERIAL_DEV_FROM_THIS (This);\r
// Check for default settings and fill in actual values.\r
//\r
if (BaudRate == 0) {\r
- BaudRate = FixedPcdGet64 (PcdUartDefaultBaudRate);\r
+ BaudRate = PcdGet64 (PcdUartDefaultBaudRate);\r
}\r
\r
if (ReceiveFifoDepth == 0) {\r
}\r
\r
if (Parity == DefaultParity) {\r
- Parity = (EFI_PARITY_TYPE)FixedPcdGet8 (PcdUartDefaultParity);\r
+ Parity = (EFI_PARITY_TYPE)PcdGet8 (PcdUartDefaultParity);\r
}\r
\r
if (DataBits == 0) {\r
- DataBits = FixedPcdGet8 (PcdUartDefaultDataBits);\r
+ DataBits = PcdGet8 (PcdUartDefaultDataBits);\r
}\r
\r
if (StopBits == DefaultStopBits) {\r
- StopBits = (EFI_STOP_BITS_TYPE) FixedPcdGet8 (PcdUartDefaultStopBits);\r
+ StopBits = (EFI_STOP_BITS_TYPE) PcdGet8 (PcdUartDefaultStopBits);\r
}\r
//\r
// 5 and 6 data bits can not be verified on a 16550A UART\r
if ((StopBits < OneStopBit) || (StopBits > TwoStopBits)) {\r
return EFI_INVALID_PARAMETER;\r
}\r
- //\r
- // for DataBits = 5, StopBits can not set TwoStopBits\r
- //\r
- // if ((DataBits == 5) && (StopBits == TwoStopBits)) {\r
- // return EFI_INVALID_PARAMETER;\r
- // }\r
+\r
//\r
// for DataBits = 6,7,8, StopBits can not set OneFiveStopBits\r
//\r
SerialDevice->UartDevicePath.Parity = (UINT8) Parity;\r
SerialDevice->UartDevicePath.StopBits = (UINT8) StopBits;\r
\r
- NewDevicePath = AppendDevicePathNode (\r
- SerialDevice->ParentDevicePath,\r
- (EFI_DEVICE_PATH_PROTOCOL *) &SerialDevice->UartDevicePath\r
- );\r
- if (NewDevicePath == NULL) {\r
- gBS->RestoreTPL (Tpl);\r
- return EFI_DEVICE_ERROR;\r
- }\r
-\r
+ Status = EFI_SUCCESS;\r
if (SerialDevice->Handle != NULL) {\r
+ Uart = (UART_DEVICE_PATH *) (\r
+ (UINTN) SerialDevice->DevicePath\r
+ + GetDevicePathSize (SerialDevice->ParentDevicePath)\r
+ - END_DEVICE_PATH_LENGTH\r
+ );\r
+ CopyMem (Uart, &SerialDevice->UartDevicePath, sizeof (UART_DEVICE_PATH));\r
Status = gBS->ReinstallProtocolInterface (\r
SerialDevice->Handle,\r
&gEfiDevicePathProtocolGuid,\r
SerialDevice->DevicePath,\r
- NewDevicePath\r
+ SerialDevice->DevicePath\r
);\r
- if (EFI_ERROR (Status)) {\r
- gBS->RestoreTPL (Tpl);\r
- return Status;\r
- }\r
}\r
\r
- if (SerialDevice->DevicePath != NULL) {\r
- gBS->FreePool (SerialDevice->DevicePath);\r
- }\r
-\r
- SerialDevice->DevicePath = NewDevicePath;\r
-\r
gBS->RestoreTPL (Tpl);\r
\r
- return EFI_SUCCESS;\r
+ return Status;\r
}\r
\r
/**\r
IN UINT32 Control\r
)\r
{\r
- SERIAL_DEV *SerialDevice;\r
- SERIAL_PORT_MCR Mcr;\r
- EFI_TPL Tpl;\r
+ SERIAL_DEV *SerialDevice;\r
+ SERIAL_PORT_MCR Mcr;\r
+ EFI_TPL Tpl;\r
+ UART_FLOW_CONTROL_DEVICE_PATH *FlowControl;\r
+ EFI_STATUS Status;\r
\r
//\r
// The control bits that can be set are :\r
// EFI_SERIAL_REQUEST_TO_SEND: 0x0002 // WO\r
// EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE: 0x1000 // RW\r
// EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE: 0x2000 // RW\r
+ // EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE: 0x4000 // RW\r
//\r
SerialDevice = SERIAL_DEV_FROM_THIS (This);\r
\r
//\r
// first determine the parameter is invalid\r
//\r
- if ((Control & 0xffff8ffc) != 0) {\r
+ if ((Control & (~(EFI_SERIAL_REQUEST_TO_SEND | EFI_SERIAL_DATA_TERMINAL_READY |\r
+ EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE | EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE | \r
+ EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE))) != 0) {\r
return EFI_UNSUPPORTED;\r
}\r
\r
SerialDevice->SoftwareLoopbackEnable = TRUE;\r
}\r
\r
+ Status = EFI_SUCCESS;\r
+ if (SerialDevice->Handle != NULL) {\r
+ FlowControl = (UART_FLOW_CONTROL_DEVICE_PATH *) (\r
+ (UINTN) SerialDevice->DevicePath\r
+ + GetDevicePathSize (SerialDevice->ParentDevicePath)\r
+ - END_DEVICE_PATH_LENGTH\r
+ + sizeof (UART_DEVICE_PATH)\r
+ );\r
+ if (IsUartFlowControlNode (FlowControl) &&\r
+ ((ReadUnaligned32 (&FlowControl->FlowControlMap) == UART_FLOW_CONTROL_HARDWARE) ^ SerialDevice->HardwareFlowControl)) {\r
+ //\r
+ // Flow Control setting is changed, need to reinstall device path protocol\r
+ //\r
+ WriteUnaligned32 (&FlowControl->FlowControlMap, SerialDevice->HardwareFlowControl ? UART_FLOW_CONTROL_HARDWARE : 0);\r
+ Status = gBS->ReinstallProtocolInterface (\r
+ SerialDevice->Handle,\r
+ &gEfiDevicePathProtocolGuid,\r
+ SerialDevice->DevicePath,\r
+ SerialDevice->DevicePath\r
+ );\r
+ }\r
+ }\r
+\r
gBS->RestoreTPL (Tpl);\r
\r
- return EFI_SUCCESS;\r
+ return Status;\r
}\r
\r
/**\r