# Intel Framework Module Package contains the definitions and module implementation\r
# which follows Intel EFI Framework Specification.\r
#\r
-# Copyright (c) 2007 - 2010, Intel Corporation.\r
+# Copyright (c) 2007 - 2011, Intel Corporation. All rights reserved.<BR>\r
#\r
-# All rights reserved. This program and the accompanying materials\r
+# This program and the accompanying materials\r
# are licensed and made available under the terms and conditions of the BSD License\r
# which accompanies this distribution. The full text of the license may be found at\r
# http://opensource.org/licenses/bsd-license.php\r
DEC_SPECIFICATION = 0x00010005\r
PACKAGE_NAME = IntelFrameworkModulePkg\r
PACKAGE_GUID = 88894582-7553-4822-B484-624E24B6DECF\r
- PACKAGE_VERSION = 0.90\r
+ PACKAGE_VERSION = 0.91\r
\r
[Includes]\r
Include # Root include for the package\r
# Include/Guid/LzmaDecompress.h\r
gLzmaCustomDecompressGuid = { 0xEE4E5898, 0x3914, 0x4259, { 0x9D, 0x6E, 0xDC, 0x7B, 0xD7, 0x94, 0x03, 0xCF }}\r
\r
+ ## Include/Guid/AcpiVariable.h\r
+ gEfiAcpiVariableCompatiblityGuid = { 0xc020489e, 0x6db2, 0x4ef2, { 0x9a, 0xa5, 0xca, 0x6, 0xfc, 0x11, 0xd3, 0x6a }}\r
+\r
+ ## Include/Guid/LegacyBios.h\r
+ gEfiLegacyBiosGuid = { 0x2E3044AC, 0x879F, 0x490F, { 0x97, 0x60, 0xBB, 0xDF, 0xAF, 0x69, 0x5F, 0x50 }}\r
+\r
[Protocols]\r
## Vga Mini port binding for a VGA controller\r
# Include/Protocol/VgaMiniPort.h\r
# Include/Protocol/OEMBadging.h\r
gEfiOEMBadgingProtocolGuid = { 0x170E13C0, 0xBF1B, 0x4218, { 0x87, 0x1D, 0x2A, 0xBD, 0xC6, 0xF8, 0x87, 0xBC }}\r
\r
+ ## Include/Protocol/ExitPmAuth.h\r
+ gExitPmAuthProtocolGuid = { 0xd088a413, 0xa70, 0x4217, { 0xba, 0x55, 0x9a, 0x3c, 0xb6, 0x5c, 0x41, 0xb3 }}\r
+\r
[PcdsFeatureFlag]\r
## This PCD specifies whether StatusCode is reported via OEM device.\r
gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdStatusCodeUseOEM|FALSE|BOOLEAN|0x00010024\r
## This PCD specifies whether Serial device use half hand shake.\r
gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdIsaBusSerialUseHalfHandshake|FALSE|BOOLEAN|0x00010043\r
\r
+ ## Indicates if CSM support is needed for ACPI S3 Save.\r
+ # If TRUE, CSM support is enclosed for ACPI S3 Save.\r
+ gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdPlatformCsmSupport|TRUE|BOOLEAN|0x00010044\r
+\r
+ ## This PCD specifies whether PS2 keyboard does a extended verification during start.\r
+ gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdPs2KbdExtendedVerification|TRUE|BOOLEAN|0x00010045\r
+\r
+ ## If TRUE, ACPI Support Protocol will be installed.\r
+ gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdInstallAcpiSupportProtocol|TRUE|BOOLEAN|0x00010046\r
+\r
[PcdsFixedAtBuild]\r
## FFS filename to find the default BMP Logo file.\r
gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdLogoFile |{ 0x99, 0x8b, 0xB2, 0x7B, 0xBB, 0x61, 0xD5, 0x11, 0x9A, 0x5D, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }|VOID*|0x40000003\r
# BIT2 indicates if ISA memory is supported\r
gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdIsaBusSupportedFeatures|0x05|UINT8|0x00010040\r
\r
-[PcdsDynamic]\r
+[PcdsDynamic, PcdsDynamicEx]\r
## PCD is used to mark if the machine has complete one boot cycle before.\r
# After the complete boot, the variable BootState will be set to TRUE.\r
gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdBootState|TRUE|BOOLEAN|0x0001002f\r
## Error level for hardware recorder. If value 0, platform does not support feature of hardware error record.\r
# This PCD should be set as HII type PCD by platform integrator mapped to variable L"HwErrRecSupport"\r
gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdHardwareErrorRecordLevel|0|UINT16|0x40000002\r
+\r
+[PcdsFixedAtBuild, PcdsDynamic, PcdsDynamicEx, PcdsPatchableInModule]\r
+ ## I/O Base address of floppy device controller.\r
+ gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdFdcBaseAddress|0x3f0|UINT16|0x30000000\r
+\r
+ ## If TRUE, BiosVideo will switch to 80x25 Text VGA Mode when exiting boot service.\r
+ gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdBiosVideoSetTextVgaModeEnable|FALSE|BOOLEAN|0x30000001\r
+\r
+ ## If TRUE, BiosVideo will check for VESA BIOS Extension service support.\r
+ gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdBiosVideoCheckVbeEnable|TRUE|BOOLEAN|0x30000002\r
+\r
+ ## If TRUE, BiosVideo will check for VGA service support.\r
+ # NOTE: If both PcdBiosVideoCheckVbeEnable and PcdBiosVideoCheckVgaEnable are set to FALSE,\r
+ # that means Graphics Output protocol will not be installed, the VGA miniport protocol will be installed instead.\r
+ gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdBiosVideoCheckVgaEnable|TRUE|BOOLEAN|0x30000003\r
+\r
+ ## If TRUE, memory space for legacy region will be set as cacheable.\r
+ gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdLegacyBiosCacheLegacyRegion|TRUE|BOOLEAN|0x00000004\r
+\r
+ ## The PCD is used to specify memory size with bytes to reserve EBDA for OPROM.\r
+ ## The value should be a multiple of 4KB.\r
+ gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdEbdaReservedMemorySize|0x8000|UINT32|0x30000005\r
+\r
+ ## The PCD is used to specify memory size with page number for a pre-allocated ACPI NVS memory to be used\r
+ # by PEI in S3 phase. The default size 32K. When changing the value of this PCD, the platform\r
+ # developer should make sure the memory size is large enough to meet PEI requiremnt in S3 phase.\r
+ gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdS3AcpiReservedMemorySize|0x8000|UINT32|0x30000006\r
+\r
+ ## The PCD is used to specify memory size for boot script executor stack usage in S3 phase.\r
+ # The default size 32K. When changing the value of this PCD, the platform developer should\r
+ # make sure the memory size is large enough to meet boot script executor requiremnt in S3 phase.\r
+ gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdS3BootScriptStackSize|0x8000|UINT32|0x30000007\r
+\r
+\r