/** @file\r
- This file declares Smbus PPI.\r
+ This file declares Smbus PPI which provides the basic I/O interfaces that a PEIM \r
+ uses to access its SMBus controller and the slave devices attached to it.\r
\r
- Copyright (c) 2007, Intel Corporation\r
+ Copyright (c) 2007 - 2009, Intel Corporation\r
All rights reserved. This program and the accompanying materials\r
are licensed and made available under the terms and conditions of the BSD License\r
which accompanies this distribution. The full text of the license may be found at\r
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
\r
- Module Name: Smbus.h\r
-\r
@par Revision Reference:\r
This PPI is defined in Framework of EFI SmBus PPI spec.\r
Version 0.9\r
\r
**/\r
\r
-#ifndef _PEI_SMBUS_PPI_H\r
-#define _PEI_SMBUS_PPI_H\r
+#ifndef _PEI_SMBUS_PPI_H_\r
+#define _PEI_SMBUS_PPI_H_\r
\r
-#include <IndustryStandard/SmBus.h>\r
+#include <Ppi/Smbus2.h>\r
\r
#define EFI_PEI_SMBUS_PPI_GUID \\r
{ \\r
/**\r
Executes an SMBus operation to an SMBus controller.\r
\r
- @param PeiServices A pointer to the system PEI Services Table.\r
- @param This A pointer to the EFI_PEI_SMBUS_PPI instance.\r
- @param SlaveAddress The SMBUS hardware address to which the SMBUS\r
- device is preassigned or allocated.\r
- @param Command This command is transmitted by the SMBus host\r
- controller to the SMBus slave device and the interpretation is\r
- SMBus slave device specific.\r
- @param Operation Signifies which particular SMBus hardware protocol\r
- instance that it will use to execute the SMBus transactions.\r
- @param PecCheck Defines if Packet Error Code (PEC) checking is required\r
- for this operation.\r
- @param Length Signifies the number of bytes that this operation will do.\r
- @param Buffer Contains the value of data to execute to the SMBus slave device.\r
+ @param[in] PeiServices A pointer to the system PEI Services Table.\r
+ @param[in] This A pointer to the EFI_PEI_SMBUS_PPI instance.\r
+ @param[in] SlaveAddress The SMBUS hardware address to which the SMBUS\r
+ device is preassigned or allocated.\r
+ @param[in] Command This command is transmitted by the SMBus host\r
+ controller to the SMBus slave device and the interpretation is\r
+ SMBus slave device specific.\r
+ @param[in] Operation Signifies which particular SMBus hardware protocol\r
+ instance that it will use to execute the SMBus transactions.\r
+ @param[in] PecCheck Defines if Packet Error Code (PEC) checking is required\r
+ for this operation.\r
+ @param[in, out] Length Signifies the number of bytes that this operation will do.\r
+ @param[in, out] Buffer Contains the value of data to execute to the SMBus slave device.\r
\r
@retval EFI_SUCCESS The last data that was returned from the access\r
matched the poll exit criteria.\r
- @retval EFI_CRC_ERROR The checksum is not correct (PEC is incorrect)\r
+ @retval EFI_CRC_ERROR The checksum is not correct (PEC is incorrect).\r
@retval EFI_TIMEOUT Timeout expired before the operation was completed.\r
Timeout is determined by the SMBus host controller device.\r
@retval EFI_OUT_OF_RESOURCES The request could not be completed\r
@retval EFI_DEVICE_ERROR The request was not completed because\r
a failure reflected in the Host Status Register bit.\r
@retval EFI_INVALID_PARAMETER Operation is not defined in EFI_SMBUS_OPERATION.\r
- Or Length/Buffer is NULL for operations except for EfiSmbusQuickRead and\r
+ @retval EFI_INVALID_PARAMETER Length/Buffer is NULL for operations except for EfiSmbusQuickRead and\r
EfiSmbusQuickWrite. Length is outside the range of valid values.\r
@retval EFI_UNSUPPORTED The SMBus operation or PEC is not supported.\r
@retval EFI_BUFFER_TOO_SMALL Buffer is not sufficient for this operation.\r
**/\r
typedef\r
EFI_STATUS\r
-(EFIAPI *EFI_PEI_SMBUS_PPI_EXECUTE_OPERATION) (\r
+(EFIAPI *EFI_PEI_SMBUS_PPI_EXECUTE_OPERATION)(\r
IN EFI_PEI_SERVICES **PeiServices,\r
- IN EFI_PEI_SMBUS_PPI *This,\r
+ IN EFI_PEI_SMBUS_PPI *This,\r
IN EFI_SMBUS_DEVICE_ADDRESS SlaveAddress,\r
IN EFI_SMBUS_DEVICE_COMMAND Command,\r
IN EFI_SMBUS_OPERATION Operation,\r
IN OUT VOID *Buffer\r
);\r
\r
-typedef struct {\r
- UINT32 VendorSpecificId;\r
- UINT16 SubsystemDeviceId;\r
- UINT16 SubsystemVendorId;\r
- UINT16 Interface;\r
- UINT16 DeviceId;\r
- UINT16 VendorId;\r
- UINT8 VendorRevision;\r
- UINT8 DeviceCapabilities;\r
-} EFI_SMBUS_UDID;\r
-\r
/**\r
CallBack function can be registered in EFI_PEI_SMBUS_PPI_NOTIFY.\r
\r
- @param PeiServices A pointer to the system PEI Services Table.\r
- @param This A pointer to the EFI_PEI_SMBUS_PPI instance.\r
- @param SlaveAddress The SMBUS hardware address to which the SMBUS\r
- device is preassigned or allocated.\r
- @param Data Data of the SMBus host notify command that\r
- the caller wants to be called.\r
+ This function is user-defined and will called when the SlaveAddress/Data pair happens.\r
+\r
+ @param[in] PeiServices A pointer to the system PEI Services Table.\r
+ @param[in] This A pointer to the EFI_PEI_SMBUS_PPI instance.\r
+ @param[in] SlaveAddress The SMBUS hardware address to which the SMBUS\r
+ device is preassigned or allocated.\r
+ @param[in] Data Data of the SMBus host notify command that\r
+ the caller wants to be called.\r
\r
- @return Status Code\r
+ @return Status Code returned by callback function.\r
\r
**/\r
typedef\r
EFI_STATUS\r
-(EFIAPI *EFI_PEI_SMBUS_NOTIFY_FUNCTION) (\r
+(EFIAPI *EFI_PEI_SMBUS_NOTIFY_FUNCTION)(\r
IN EFI_PEI_SERVICES **PeiServices,\r
- IN EFI_PEI_SMBUS_PPI *SmbusPpi,\r
+ IN EFI_PEI_SMBUS_PPI *SmbusPpi,\r
IN EFI_SMBUS_DEVICE_ADDRESS SlaveAddress,\r
IN UINTN Data\r
);\r
The ArpDevice() function enumerates the entire bus or enumerates a specific\r
device that is identified by SmbusUdid.\r
\r
- @param PeiServices A pointer to the system PEI Services Table.\r
- @param This A pointer to the EFI_PEI_SMBUS_PPI instance.\r
- @param ArpAll A Boolean expression that indicates if the host drivers need\r
- to enumerate all the devices or enumerate only the device that is identified\r
- by SmbusUdid. If ArpAll is TRUE, SmbusUdid and SlaveAddress are optional.\r
- If ArpAll is FALSE, ArpDevice will enumerate SmbusUdid and the address\r
- will be at SlaveAddress.\r
- @param SmbusUdid The targeted SMBus Unique Device Identifier (UDID).\r
- The UDID may not exist for SMBus devices with fixed addresses.\r
- @param SlaveAddress The new SMBus address for the slave device for\r
- which the operation is targeted.\r
+ @param[in] PeiServices A pointer to the system PEI Services Table.\r
+ @param[in] This A pointer to the EFI_PEI_SMBUS_PPI instance.\r
+ @param[in] ArpAll A Boolean expression that indicates if the host drivers need\r
+ to enumerate all the devices or enumerate only the device that is identified\r
+ by SmbusUdid. If ArpAll is TRUE, SmbusUdid and SlaveAddress are optional.\r
+ If ArpAll is FALSE, ArpDevice will enumerate SmbusUdid and the address\r
+ will be at SlaveAddress.\r
+ @param[in] SmbusUdid The targeted SMBus Unique Device Identifier (UDID).\r
+ The UDID may not exist for SMBus devices with fixed addresses.\r
+ @param[in, out] SlaveAddress The new SMBus address for the slave device for\r
+ which the operation is targeted.\r
+ This address may be NULL.\r
\r
@retval EFI_SUCCESS The SMBus slave device address was set.\r
@retval EFI_INVALID_PARAMETER SlaveAddress is NULL.\r
due to a lack of resources.\r
@retval EFI_TIMEOUT The SMBus slave device did not respond.\r
@retval EFI_DEVICE_ERROR The request was not completed because the transaction failed.\r
+ @retval EFI_UNSUPPORTED ArpDevice() are not implemented by this PEIM. \r
+ This return value is not defined in Framwork Specification.\r
+ This return value had been intruduced in PI Specification.\r
\r
**/\r
typedef\r
EFI_STATUS\r
-(EFIAPI *EFI_PEI_SMBUS_PPI_ARP_DEVICE) (\r
+(EFIAPI *EFI_PEI_SMBUS_PPI_ARP_DEVICE)(\r
IN EFI_PEI_SERVICES **PeiServices,\r
- IN EFI_PEI_SMBUS_PPI *This,\r
+ IN EFI_PEI_SMBUS_PPI *This,\r
IN BOOLEAN ArpAll,\r
IN EFI_SMBUS_UDID *SmbusUdid, OPTIONAL\r
IN OUT EFI_SMBUS_DEVICE_ADDRESS *SlaveAddress OPTIONAL\r
);\r
\r
-typedef struct {\r
- EFI_SMBUS_DEVICE_ADDRESS SmbusDeviceAddress;\r
- EFI_SMBUS_UDID SmbusDeviceUdid;\r
-} EFI_SMBUS_DEVICE_MAP;\r
-\r
/**\r
The GetArpMap() function returns the mapping of all the SMBus devices\r
that are enumerated by the SMBus host driver.\r
\r
- @param PeiServices A pointer to the system PEI Services Table.\r
- @param This A pointer to the EFI_PEI_SMBUS_PPI instance.\r
- @param Length Size of the buffer that contains the SMBus device map.\r
- @param SmbusDeviceMap The pointer to the device map as enumerated\r
- by the SMBus controller driver.\r
+ @param[in] PeiServices A pointer to the system PEI Services Table.\r
+ @param[in] This A pointer to the EFI_PEI_SMBUS_PPI instance.\r
+ @param[in, out] Length Size of the buffer that contains the SMBus device map.\r
+ @param[in, out] SmbusDeviceMap The pointer to the device map as enumerated\r
+ by the SMBus controller driver.\r
\r
- @retval EFI_SUCCESS The device map was returned correctly in the buffer.\r
+ @retval EFI_SUCCESS The device map was returned correctly in the buffer.\r
+ @retval EFI_UNSUPPORTED GetArpMap() are not implemented by this PEIM. \r
+ This return value was not defined in Framwork Specification.\r
+ This return value had been intruduced in PI Specification.\r
\r
**/\r
typedef\r
EFI_STATUS\r
-(EFIAPI *EFI_PEI_SMBUS_PPI_GET_ARP_MAP) (\r
+(EFIAPI *EFI_PEI_SMBUS_PPI_GET_ARP_MAP)(\r
IN EFI_PEI_SERVICES **PeiServices,\r
- IN EFI_PEI_SMBUS_PPI *This,\r
+ IN EFI_PEI_SMBUS_PPI *This,\r
IN OUT UINTN *Length,\r
IN OUT EFI_SMBUS_DEVICE_MAP **SmbusDeviceMap\r
);\r
\r
/**\r
+ Allows a device driver to register for a callback when the bus driver detects a state that it needs to \r
+ propagate to other PEIMs that are registered for a callback.\r
+\r
The Notify() function registers all the callback functions to allow the\r
bus driver to call these functions when the SlaveAddress/Data pair happens.\r
-\r
- @param PeiServices A pointer to the system PEI Services Table.\r
- @param This A pointer to the EFI_PEI_SMBUS_PPI instance.\r
- @param SlaveAddress Address that the host controller detects as\r
- sending a message and calls all the registered functions.\r
- @param Data Data that the host controller detects as sending a message\r
- and calls all the registered functions.\r
- @param NotifyFunction The function to call when the bus driver\r
- detects the SlaveAddress and Data pair.\r
-\r
- @retval EFI_SUCCESS NotifyFunction has been registered.\r
+ All functions to be registered with EFI_PEI_SMBUS_PPI_NOTIFY must be of type\r
+ EFI_PEI_SMBUS_NOTIFY_FUNCTION.\r
+\r
+ @param[in] PeiServices A pointer to the system PEI Services Table.\r
+ @param[in] This A pointer to the EFI_PEI_SMBUS_PPI instance.\r
+ @param[in] SlaveAddress Address that the host controller detects as\r
+ sending a message and calls all the registered functions.\r
+ @param[in] Data Data that the host controller detects as sending a message\r
+ and calls all the registered functions.\r
+ @param[in] NotifyFunction The function to call when the bus driver\r
+ detects the SlaveAddress and Data pair.\r
+\r
+ @retval EFI_SUCCESS NotifyFunction has been registered.\r
+ @retval EFI_UNSUPPORTED Notify() are not implemented by this PEIM. \r
+ This return value is not defined in Framwork Specification.\r
+ This return value had been intruduced in PI Specification.\r
\r
**/\r
typedef\r
EFI_STATUS\r
-(EFIAPI *EFI_PEI_SMBUS_PPI_NOTIFY) (\r
- IN EFI_PEI_SERVICES **PeiServices,\r
- IN EFI_PEI_SMBUS_PPI *This,\r
- IN EFI_SMBUS_DEVICE_ADDRESS SlaveAddress,\r
- IN UINTN Data,\r
- IN EFI_PEI_SMBUS_NOTIFY_FUNCTION NotifyFunction\r
+(EFIAPI *EFI_PEI_SMBUS_PPI_NOTIFY)(\r
+ IN EFI_PEI_SERVICES **PeiServices,\r
+ IN EFI_PEI_SMBUS_PPI *This,\r
+ IN EFI_SMBUS_DEVICE_ADDRESS SlaveAddress,\r
+ IN UINTN Data,\r
+ IN EFI_PEI_SMBUS_NOTIFY_FUNCTION NotifyFunction\r
);\r
\r
-/**\r
- @par Ppi Description:\r
- Provides the basic I/O interfaces that a PEIM uses to access\r
- its SMBus controller and the slave devices attached to it.\r
-\r
- @param Execute\r
- Executes the SMBus operation to an SMBus slave device.\r
-\r
- @param ArpDevice\r
- Allows an SMBus 2.0 device(s) to be Address Resolution Protocol (ARP)\r
-\r
- @param GetArpMap\r
- Allows a PEIM to retrieve the address that was allocated by the SMBus\r
- host controller during enumeration/ARP.\r
-\r
- @param Notify\r
- Allows a driver to register for a callback to the SMBus host\r
- controller driver when the bus issues a notification to the bus controller PEIM.\r
-\r
-**/\r
+///\r
+/// Provides the basic I/O interfaces that a PEIM uses to access\r
+/// its SMBus controller and the slave devices attached to it.\r
+///\r
struct _EFI_PEI_SMBUS_PPI {\r
+ ///\r
+ /// Executes the SMBus operation to an SMBus slave device.\r
+ ///\r
EFI_PEI_SMBUS_PPI_EXECUTE_OPERATION Execute;\r
+ \r
+ ///\r
+ /// Allows an SMBus 2.0 device(s) to be Address Resolution Protocol (ARP)\r
+ ///\r
EFI_PEI_SMBUS_PPI_ARP_DEVICE ArpDevice;\r
+ \r
+ ///\r
+ /// Allows a PEIM to retrieve the address that was allocated by the SMBus\r
+ /// host controller during enumeration/ARP. \r
+ ///\r
EFI_PEI_SMBUS_PPI_GET_ARP_MAP GetArpMap;\r
+ \r
+ ///\r
+ /// Allows a driver to register for a callback to the SMBus host\r
+ /// controller driver when the bus issues a notification to the bus controller PEIM. \r
+ ///\r
EFI_PEI_SMBUS_PPI_NOTIFY Notify;\r
};\r
\r
projects / mirror_edk2.git / blobdiff