Add new adding ATA related status code in PI 1.3 to definition and ATA modules.

[mirror_edk2.git] / MdeModulePkg / Bus / Ata / AtaAtapiPassThru / AhciMode.c

diff --git a/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AhciMode.c b/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AhciMode.c
index 2001175fe723559056ea578b39f78922c5fd167b..950b5da03882ccfec156d042b082653e04c6c79f 100644 (file)
--- a/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AhciMode.c
+++ b/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AhciMode.c
@@ -1,7 +1,7 @@
 /** @file\r
   The file for AHCI mode of ATA host controller.\r
 \r
-  Copyright (c) 2010 - 2012, Intel Corporation. All rights reserved.<BR>\r
+  Copyright (c) 2010 - 2013, Intel Corporation. All rights reserved.<BR>\r
   This program and the accompanying materials\r
   are licensed and made available under the terms and conditions of the BSD License\r
   which accompanies this distribution.  The full text of the license may be found at\r
@@ -1487,9 +1487,18 @@ AhciAtaSmartReturnStatusCheck (
              );\r
 \r
   if (EFI_ERROR (Status)) {\r
+    REPORT_STATUS_CODE (\r
+      EFI_ERROR_CODE | EFI_ERROR_MINOR,\r
+      (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_ATA_BUS_SMART_DISABLED)\r
+      );\r
     return EFI_DEVICE_ERROR;\r
   }\r
 \r
+  REPORT_STATUS_CODE (\r
+    EFI_PROGRESS_CODE,\r
+    (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_ATA_BUS_SMART_ENABLE)\r
+    );\r
+\r
   FisBaseAddr = (UINTN)AhciRegisters->AhciRFis + Port * sizeof (EFI_AHCI_RECEIVED_FIS);\r
 \r
   Value = *(UINT32 *) (FisBaseAddr + EFI_AHCI_D2H_FIS_OFFSET);\r
@@ -1503,12 +1512,19 @@ AhciAtaSmartReturnStatusCheck (
       // The threshold exceeded condition is not detected by the device\r
       //\r
       DEBUG ((EFI_D_INFO, "The S.M.A.R.T threshold exceeded condition is not detected\n"));\r
-\r
+      REPORT_STATUS_CODE (\r
+            EFI_PROGRESS_CODE,\r
+            (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_ATA_BUS_SMART_UNDERTHRESHOLD)\r
+            );\r
     } else if ((LBAMid == 0xf4) && (LBAHigh == 0x2c)) {\r
       //\r
       // The threshold exceeded condition is detected by the device\r
       //\r
       DEBUG ((EFI_D_INFO, "The S.M.A.R.T threshold exceeded condition is detected\n"));\r
+      REPORT_STATUS_CODE (\r
+           EFI_PROGRESS_CODE,\r
+           (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_ATA_BUS_SMART_OVERTHRESHOLD)\r
+           );\r
     }\r
   }\r
 \r
@@ -1549,11 +1565,21 @@ AhciAtaSmartSupport (
     //\r
     DEBUG ((EFI_D_INFO, "S.M.A.R.T feature is not supported at port [%d] PortMultiplier [%d]!\n",\r
             Port, PortMultiplier));\r
+    REPORT_STATUS_CODE (\r
+      EFI_ERROR_CODE | EFI_ERROR_MINOR,\r
+      (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_ATA_BUS_SMART_NOTSUPPORTED)\r
+      );\r
   } else {\r
     //\r
     // Check if the feature is enabled. If not, then enable S.M.A.R.T.\r
     //\r
     if ((IdentifyData->AtaData.command_set_feature_enb_85 & 0x0001) != 0x0001) {\r
+\r
+      REPORT_STATUS_CODE (\r
+        EFI_PROGRESS_CODE,\r
+        (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_ATA_BUS_SMART_DISABLE)\r
+        );\r
+\r
       ZeroMem (&AtaCommandBlock, sizeof (EFI_ATA_COMMAND_BLOCK));\r
 \r
       AtaCommandBlock.AtaCommand      = ATA_CMD_SMART;\r