This file implements protocol interfaces: Driver Binding protocol,\r
Block IO protocol and DiskInfo protocol.\r
\r
- Copyright (c) 2009 - 2014, Intel Corporation. All rights reserved.<BR>\r
+ Copyright (c) 2009 - 2015, Intel Corporation. All rights reserved.<BR>\r
This program and the accompanying materials\r
are licensed and made available under the terms and conditions of the BSD License\r
which accompanies this distribution. The full text of the license may be found at\r
\r
#include "AtaBus.h"\r
\r
-UINT8 mMorControl;\r
-\r
//\r
// ATA Bus Driver Binding Protocol Instance\r
//\r
DEBUG ((EFI_D_INFO, "Successfully Install Storage Security Protocol on the ATA device\n"));\r
}\r
\r
-\r
- if (((mMorControl & 0x01) == 0x01) && ((AtaDevice->IdentifyData->trusted_computing_support & BIT0) != 0)) {\r
- DEBUG ((EFI_D_INFO,\r
- "mMorControl = %x, AtaDevice->IdentifyData->trusted_computing_support & BIT0 = %x\n",\r
- mMorControl,\r
- (AtaDevice->IdentifyData->trusted_computing_support & BIT0)\r
- ));\r
- DEBUG ((EFI_D_INFO, "Try to lock device by sending TPer Reset command...\n"));\r
- InitiateTPerReset(AtaDevice);\r
- }\r
-\r
gBS->OpenProtocol (\r
AtaBusDriverData->Controller,\r
&gEfiAtaPassThruProtocolGuid,\r
ATA_DEVICE *Private;\r
EFI_TPL OldTpl;\r
\r
- DEBUG ((EFI_D_INFO, "EFI Storage Security Protocol - Read"));\r
+ DEBUG ((EFI_D_INFO, "EFI Storage Security Protocol - Read\n"));\r
if ((PayloadBuffer == NULL || PayloadTransferSize == NULL) && PayloadBufferSize != 0) {\r
return EFI_INVALID_PARAMETER;\r
}\r
ATA_DEVICE *Private;\r
EFI_TPL OldTpl;\r
\r
- DEBUG ((EFI_D_INFO, "EFI Storage Security Protocol - Send"));\r
+ DEBUG ((EFI_D_INFO, "EFI Storage Security Protocol - Send\n"));\r
if ((PayloadBuffer == NULL) && (PayloadBufferSize != 0)) {\r
return EFI_INVALID_PARAMETER;\r
}\r
)\r
{\r
EFI_STATUS Status;\r
- UINTN DataSize;\r
\r
//\r
// Install driver model protocol(s).\r
);\r
ASSERT_EFI_ERROR (Status);\r
\r
- //\r
- // Get the MorControl bit.\r
- //\r
- DataSize = sizeof (mMorControl);\r
- Status = gRT->GetVariable (\r
- MEMORY_OVERWRITE_REQUEST_VARIABLE_NAME,\r
- &gEfiMemoryOverwriteControlDataGuid,\r
- NULL,\r
- &DataSize,\r
- &mMorControl\r
- );\r
-\r
- if (EFI_ERROR (Status)) {\r
- DEBUG ((EFI_D_INFO, "AtaBus:gEfiMemoryOverwriteControlDataGuid doesn't exist!!***\n"));\r
- mMorControl = 0;\r
- Status = EFI_SUCCESS;\r
- } else {\r
- DEBUG ((EFI_D_INFO, "AtaBus:Get the gEfiMemoryOverwriteControlDataGuid = %x!!***\n", mMorControl));\r
- }\r
-\r
return Status;\r
}\r
\r
-/**\r
- Send TPer Reset command to reset eDrive to lock all protected bands.\r
- Typically, there are 2 mechanism for resetting eDrive. They are:\r
- 1. TPer Reset through IEEE 1667 protocol.\r
- 2. TPer Reset through native TCG protocol.\r
- This routine will detect what protocol the attached eDrive comform to, TCG or\r
- IEEE 1667 protocol. Then send out TPer Reset command separately.\r
-\r
- @param[in] AtaDevice ATA_DEVICE pointer.\r
-\r
-**/\r
-VOID\r
-InitiateTPerReset (\r
- IN ATA_DEVICE *AtaDevice\r
- )\r
-{\r
-\r
- EFI_STATUS Status;\r
- UINT8 *Buffer;\r
- UINTN XferSize;\r
- UINTN Len;\r
- UINTN Index;\r
- BOOLEAN TcgFlag;\r
- BOOLEAN IeeeFlag;\r
- EFI_BLOCK_IO_PROTOCOL *BlockIo;\r
- EFI_STORAGE_SECURITY_COMMAND_PROTOCOL *Ssp;\r
- SUPPORTED_SECURITY_PROTOCOLS_PARAMETER_DATA *Data;\r
-\r
- Buffer = NULL;\r
- TcgFlag = FALSE;\r
- IeeeFlag = FALSE;\r
- Ssp = &AtaDevice->StorageSecurity;\r
- BlockIo = &AtaDevice->BlockIo;\r
-\r
- //\r
- // ATA8-ACS 7.57.6.1 indicates the Transfer Length field requirements a multiple of 512.\r
- // If the length of the TRUSTED RECEIVE parameter data is greater than the Transfer Length,\r
- // then the device shall return the TRUSTED RECEIVE parameter data truncated to the requested Transfer Length.\r
- //\r
- Len = ROUNDUP512(sizeof(SUPPORTED_SECURITY_PROTOCOLS_PARAMETER_DATA));\r
- Buffer = AllocateZeroPool(Len);\r
-\r
- if (Buffer == NULL) {\r
- return;\r
- }\r
-\r
- //\r
- // When the Security Protocol field is set to 00h, and SP Specific is set to 0000h in a TRUSTED RECEIVE\r
- // command, the device basic information data shall be returned.\r
- //\r
- Status = Ssp->ReceiveData (\r
- Ssp,\r
- BlockIo->Media->MediaId,\r
- 100000000, // Timeout 10-sec\r
- 0, // SecurityProtocol\r
- 0, // SecurityProtocolSpecifcData\r
- Len, // PayloadBufferSize,\r
- Buffer, // PayloadBuffer\r
- &XferSize\r
- );\r
- if (EFI_ERROR (Status)) {\r
- goto Exit;\r
- }\r
-\r
- //\r
- // In returned data, the ListLength field indicates the total length, in bytes,\r
- // of the supported security protocol list.\r
- //\r
- Data = (SUPPORTED_SECURITY_PROTOCOLS_PARAMETER_DATA*)Buffer;\r
- Len = ROUNDUP512(sizeof (SUPPORTED_SECURITY_PROTOCOLS_PARAMETER_DATA) +\r
- (Data->SupportedSecurityListLength[0] << 8) +\r
- (Data->SupportedSecurityListLength[1])\r
- );\r
-\r
- //\r
- // Free original buffer and allocate new buffer.\r
- //\r
- FreePool(Buffer);\r
- Buffer = AllocateZeroPool(Len);\r
- if (Buffer == NULL) {\r
- return;\r
- }\r
-\r
- //\r
- // Read full supported security protocol list from device.\r
- //\r
- Status = Ssp->ReceiveData (\r
- Ssp,\r
- BlockIo->Media->MediaId,\r
- 100000000, // Timeout 10-sec\r
- 0, // SecurityProtocol\r
- 0, // SecurityProtocolSpecifcData\r
- Len, // PayloadBufferSize,\r
- Buffer, // PayloadBuffer\r
- &XferSize\r
- );\r
-\r
- if (EFI_ERROR (Status)) {\r
- goto Exit;\r
- }\r
-\r
- Data = (SUPPORTED_SECURITY_PROTOCOLS_PARAMETER_DATA*)Buffer;\r
- Len = (Data->SupportedSecurityListLength[0] << 8) + Data->SupportedSecurityListLength[1];\r
-\r
- //\r
- // Iterate full supported security protocol list to check if TCG or IEEE 1667 protocol\r
- // is supported.\r
- //\r
- for (Index = 0; Index < Len; Index++) {\r
- if (Data->SupportedSecurityProtocol[Index] == SECURITY_PROTOCOL_TCG) {\r
- //\r
- // Found a TCG device.\r
- //\r
- TcgFlag = TRUE;\r
- DEBUG ((EFI_D_INFO, "This device is a TCG protocol device\n"));\r
- break;\r
- }\r
-\r
- if (Data->SupportedSecurityProtocol[Index] == SECURITY_PROTOCOL_IEEE1667) {\r
- //\r
- // Found a IEEE 1667 device.\r
- //\r
- IeeeFlag = TRUE;\r
- DEBUG ((EFI_D_INFO, "This device is a IEEE 1667 protocol device\n"));\r
- break;\r
- }\r
- }\r
-\r
- if (!TcgFlag && !IeeeFlag) {\r
- DEBUG ((EFI_D_INFO, "Neither a TCG nor IEEE 1667 protocol device is found\n"));\r
- goto Exit;\r
- }\r
-\r
- if (TcgFlag) {\r
- //\r
- // As long as TCG protocol is supported, send out a TPer Reset\r
- // TCG command to the device via the TrustedSend command with a non-zero Transfer Length.\r
- //\r
- Status = Ssp->SendData (\r
- Ssp,\r
- BlockIo->Media->MediaId,\r
- 100000000, // Timeout 10-sec\r
- SECURITY_PROTOCOL_TCG, // SecurityProtocol\r
- 0x0400, // SecurityProtocolSpecifcData\r
- 512, // PayloadBufferSize,\r
- Buffer // PayloadBuffer\r
- );\r
-\r
- if (!EFI_ERROR (Status)) {\r
- DEBUG ((EFI_D_INFO, "Send TPer Reset Command Successfully !\n"));\r
- } else {\r
- DEBUG ((EFI_D_INFO, "Send TPer Reset Command Fail !\n"));\r
- }\r
- }\r
-\r
- if (IeeeFlag) {\r
- //\r
- // TBD : Perform a TPer Reset via IEEE 1667 Protocol\r
- //\r
- DEBUG ((EFI_D_INFO, "IEEE 1667 Protocol didn't support yet!\n"));\r
- }\r
-\r
-Exit:\r
-\r
- if (Buffer != NULL) {\r
- FreePool(Buffer);\r
- }\r
-}\r
projects / mirror_edk2.git / blobdiff