NVM Express specification.\r
\r
(C) Copyright 2014 Hewlett-Packard Development Company, L.P.<BR>\r
- Copyright (c) 2013 - 2016, Intel Corporation. All rights reserved.<BR>\r
+ Copyright (c) 2013 - 2018, Intel Corporation. All rights reserved.<BR>\r
This program and the accompanying materials\r
are licensed and made available under the terms and conditions of the BSD License\r
which accompanies this distribution. The full text of the license may be found at\r
}\r
\r
\r
+/**\r
+ Aborts the asynchronous PassThru requests.\r
+\r
+ @param[in] Private The pointer to the NVME_CONTROLLER_PRIVATE_DATA\r
+ data structure.\r
+\r
+ @retval EFI_SUCCESS The asynchronous PassThru requests have been aborted.\r
+ @return EFI_DEVICE_ERROR Fail to abort all the asynchronous PassThru requests.\r
+\r
+**/\r
+EFI_STATUS\r
+AbortAsyncPassThruTasks (\r
+ IN NVME_CONTROLLER_PRIVATE_DATA *Private\r
+ )\r
+{\r
+ EFI_PCI_IO_PROTOCOL *PciIo;\r
+ LIST_ENTRY *Link;\r
+ LIST_ENTRY *NextLink;\r
+ NVME_BLKIO2_SUBTASK *Subtask;\r
+ NVME_BLKIO2_REQUEST *BlkIo2Request;\r
+ NVME_PASS_THRU_ASYNC_REQ *AsyncRequest;\r
+ EFI_BLOCK_IO2_TOKEN *Token;\r
+ EFI_TPL OldTpl;\r
+ EFI_STATUS Status;\r
+\r
+ PciIo = Private->PciIo;\r
+ OldTpl = gBS->RaiseTPL (TPL_NOTIFY);\r
+\r
+ //\r
+ // Cancel the unsubmitted subtasks.\r
+ //\r
+ for (Link = GetFirstNode (&Private->UnsubmittedSubtasks);\r
+ !IsNull (&Private->UnsubmittedSubtasks, Link);\r
+ Link = NextLink) {\r
+ NextLink = GetNextNode (&Private->UnsubmittedSubtasks, Link);\r
+ Subtask = NVME_BLKIO2_SUBTASK_FROM_LINK (Link);\r
+ BlkIo2Request = Subtask->BlockIo2Request;\r
+ Token = BlkIo2Request->Token;\r
+\r
+ BlkIo2Request->UnsubmittedSubtaskNum--;\r
+ if (Subtask->IsLast) {\r
+ BlkIo2Request->LastSubtaskSubmitted = TRUE;\r
+ }\r
+ Token->TransactionStatus = EFI_ABORTED;\r
+\r
+ RemoveEntryList (Link);\r
+ InsertTailList (&BlkIo2Request->SubtasksQueue, Link);\r
+ gBS->SignalEvent (Subtask->Event);\r
+ }\r
+\r
+ //\r
+ // Cleanup the resources for the asynchronous PassThru requests.\r
+ //\r
+ for (Link = GetFirstNode (&Private->AsyncPassThruQueue);\r
+ !IsNull (&Private->AsyncPassThruQueue, Link);\r
+ Link = NextLink) {\r
+ NextLink = GetNextNode (&Private->AsyncPassThruQueue, Link);\r
+ AsyncRequest = NVME_PASS_THRU_ASYNC_REQ_FROM_THIS (Link);\r
+\r
+ if (AsyncRequest->MapData != NULL) {\r
+ PciIo->Unmap (PciIo, AsyncRequest->MapData);\r
+ }\r
+ if (AsyncRequest->MapMeta != NULL) {\r
+ PciIo->Unmap (PciIo, AsyncRequest->MapMeta);\r
+ }\r
+ if (AsyncRequest->MapPrpList != NULL) {\r
+ PciIo->Unmap (PciIo, AsyncRequest->MapPrpList);\r
+ }\r
+ if (AsyncRequest->PrpListHost != NULL) {\r
+ PciIo->FreeBuffer (\r
+ PciIo,\r
+ AsyncRequest->PrpListNo,\r
+ AsyncRequest->PrpListHost\r
+ );\r
+ }\r
+\r
+ RemoveEntryList (Link);\r
+ gBS->SignalEvent (AsyncRequest->CallerEvent);\r
+ FreePool (AsyncRequest);\r
+ }\r
+\r
+ if (IsListEmpty (&Private->AsyncPassThruQueue) &&\r
+ IsListEmpty (&Private->UnsubmittedSubtasks)) {\r
+ Status = EFI_SUCCESS;\r
+ } else {\r
+ Status = EFI_DEVICE_ERROR;\r
+ }\r
+\r
+ gBS->RestoreTPL (OldTpl);\r
+\r
+ return Status;\r
+}\r
+\r
+\r
/**\r
Sends an NVM Express Command Packet to an NVM Express controller or namespace. This function supports\r
both blocking I/O and non-blocking I/O. The blocking I/O functionality is required, and the non-blocking\r
{\r
NVME_CONTROLLER_PRIVATE_DATA *Private;\r
EFI_STATUS Status;\r
+ EFI_STATUS PreviousStatus;\r
EFI_PCI_IO_PROTOCOL *PciIo;\r
NVME_SQ *Sq;\r
NVME_CQ *Cq;\r
// these two cmds are special which requires their data buffer must support simultaneous access by both the\r
// processor and a PCI Bus Master. It's caller's responsbility to ensure this.\r
//\r
- if (((Sq->Opc & (BIT0 | BIT1)) != 0) && (Sq->Opc != NVME_ADMIN_CRIOCQ_CMD) && (Sq->Opc != NVME_ADMIN_CRIOSQ_CMD)) {\r
+ if (((Sq->Opc & (BIT0 | BIT1)) != 0) &&\r
+ !((Packet->QueueType == NVME_ADMIN_QUEUE) && ((Sq->Opc == NVME_ADMIN_CRIOCQ_CMD) || (Sq->Opc == NVME_ADMIN_CRIOSQ_CMD)))) {\r
if ((Packet->TransferLength == 0) || (Packet->TransferBuffer == NULL)) {\r
return EFI_INVALID_PARAMETER;\r
}\r
PhyAddr = (Sq->Prp[0] + EFI_PAGE_SIZE) & ~(EFI_PAGE_SIZE - 1);\r
Prp = NvmeCreatePrpList (PciIo, PhyAddr, EFI_SIZE_TO_PAGES(Offset + Bytes) - 1, &PrpListHost, &PrpListNo, &MapPrpList);\r
if (Prp == NULL) {\r
+ Status = EFI_OUT_OF_RESOURCES;\r
goto EXIT;\r
}\r
\r
Private->SqTdbl[QueueId].Sqt ^= 1;\r
}\r
Data = ReadUnaligned32 ((UINT32*)&Private->SqTdbl[QueueId]);\r
- PciIo->Mem.Write (\r
+ Status = PciIo->Mem.Write (\r
PciIo,\r
EfiPciIoWidthUint32,\r
NVME_BAR,\r
&Data\r
);\r
\r
+ if (EFI_ERROR (Status)) {\r
+ goto EXIT;\r
+ }\r
+\r
//\r
// For non-blocking requests, return directly if the command is placed\r
// in the submission queue.\r
AsyncRequest->Packet = Packet;\r
AsyncRequest->CommandId = Sq->Cid;\r
AsyncRequest->CallerEvent = Event;\r
+ AsyncRequest->MapData = MapData;\r
+ AsyncRequest->MapMeta = MapMeta;\r
+ AsyncRequest->MapPrpList = MapPrpList;\r
+ AsyncRequest->PrpListNo = PrpListNo;\r
+ AsyncRequest->PrpListHost = PrpListHost;\r
\r
OldTpl = gBS->RaiseTPL (TPL_NOTIFY);\r
InsertTailList (&Private->AsyncPassThruQueue, &AsyncRequest->Link);\r
// Copy the Respose Queue entry for this command to the callers response buffer\r
//\r
CopyMem(Packet->NvmeCompletion, Cq, sizeof(EFI_NVM_EXPRESS_COMPLETION));\r
- \r
+\r
//\r
// Dump every completion entry status for debugging.\r
//\r
NvmeDumpStatus(Cq);\r
DEBUG_CODE_END();\r
}\r
+ } else {\r
+ //\r
+ // Timeout occurs for an NVMe command. Reset the controller to abort the\r
+ // outstanding commands.\r
+ //\r
+ DEBUG ((DEBUG_ERROR, "NvmExpressPassThru: Timeout occurs for an NVMe command.\n"));\r
+\r
+ //\r
+ // Disable the timer to trigger the process of async transfers temporarily.\r
+ //\r
+ Status = gBS->SetTimer (Private->TimerEvent, TimerCancel, 0);\r
+ if (EFI_ERROR (Status)) {\r
+ goto EXIT;\r
+ }\r
+\r
+ //\r
+ // Reset the NVMe controller.\r
+ //\r
+ Status = NvmeControllerInit (Private);\r
+ if (!EFI_ERROR (Status)) {\r
+ Status = AbortAsyncPassThruTasks (Private);\r
+ if (!EFI_ERROR (Status)) {\r
+ //\r
+ // Re-enable the timer to trigger the process of async transfers.\r
+ //\r
+ Status = gBS->SetTimer (Private->TimerEvent, TimerPeriodic, NVME_HC_ASYNC_TIMER);\r
+ if (!EFI_ERROR (Status)) {\r
+ //\r
+ // Return EFI_TIMEOUT to indicate a timeout occurs for NVMe PassThru command.\r
+ //\r
+ Status = EFI_TIMEOUT;\r
+ }\r
+ }\r
+ } else {\r
+ Status = EFI_DEVICE_ERROR;\r
+ }\r
+\r
+ goto EXIT;\r
}\r
\r
if ((Private->CqHdbl[QueueId].Cqh ^= 1) == 0) {\r
}\r
\r
Data = ReadUnaligned32 ((UINT32*)&Private->CqHdbl[QueueId]);\r
- PciIo->Mem.Write (\r
+ PreviousStatus = Status;\r
+ Status = PciIo->Mem.Write (\r
PciIo,\r
EfiPciIoWidthUint32,\r
NVME_BAR,\r
1,\r
&Data\r
);\r
+ // The return status of PciIo->Mem.Write should not override\r
+ // previous status if previous status contains error.\r
+ Status = EFI_ERROR (PreviousStatus) ? PreviousStatus : Status;\r
\r
//\r
// For now, the code does not support the non-blocking feature for admin queue.\r