MdeModulePkg/SdMmcPciHcDxe: Replace deprecated debug level macros

[mirror_edk2.git] / MdeModulePkg / Bus / Pci / SdMmcPciHcDxe / EmmcDevice.c

diff --git a/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/EmmcDevice.c b/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/EmmcDevice.c
index 61d351726de75d72b98772c0cf84a9bfeb2c30d0..3f73194da7ff7041d029198e4569bd059fc5ac54 100755 (executable)
--- a/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/EmmcDevice.c
+++ b/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/EmmcDevice.c
@@ -533,7 +533,7 @@ EmmcTuningClkForHs200 (
   do {\r
     Status = EmmcSendTuningBlk (PassThru, Slot, BusWidth);\r
     if (EFI_ERROR (Status)) {\r
-      DEBUG ((EFI_D_ERROR, "EmmcTuningClkForHs200: Send tuning block fails with %r\n", Status));\r
+      DEBUG ((DEBUG_ERROR, "EmmcTuningClkForHs200: Send tuning block fails with %r\n", Status));\r
       return Status;\r
     }\r
 \r
@@ -551,7 +551,7 @@ EmmcTuningClkForHs200 (
     }\r
   } while (++Retry < 40);\r
 \r
-  DEBUG ((EFI_D_ERROR, "EmmcTuningClkForHs200: Send tuning block fails at %d times with HostCtrl2 %02x\n", Retry, HostCtrl2));\r
+  DEBUG ((DEBUG_ERROR, "EmmcTuningClkForHs200: Send tuning block fails at %d times with HostCtrl2 %02x\n", Retry, HostCtrl2));\r
   //\r
   // Abort the tuning procedure and reset the tuning circuit.\r
   //\r
@@ -618,20 +618,20 @@ EmmcSwitchBusWidth (
   CmdSet = 0;\r
   Status = EmmcSwitch (PassThru, Slot, Access, Index, Value, CmdSet);\r
   if (EFI_ERROR (Status)) {\r
-    DEBUG ((EFI_D_ERROR, "EmmcSwitchBusWidth: Switch to bus width %d fails with %r\n", BusWidth, Status));\r
+    DEBUG ((DEBUG_ERROR, "EmmcSwitchBusWidth: Switch to bus width %d fails with %r\n", BusWidth, Status));\r
     return Status;\r
   }\r
 \r
   Status = EmmcSendStatus (PassThru, Slot, Rca, &DevStatus);\r
   if (EFI_ERROR (Status)) {\r
-    DEBUG ((EFI_D_ERROR, "EmmcSwitchBusWidth: Send status fails with %r\n", Status));\r
+    DEBUG ((DEBUG_ERROR, "EmmcSwitchBusWidth: Send status fails with %r\n", Status));\r
     return Status;\r
   }\r
   //\r
   // Check the switch operation is really successful or not.\r
   //\r
   if ((DevStatus & BIT7) != 0) {\r
-    DEBUG ((EFI_D_ERROR, "EmmcSwitchBusWidth: The switch operation fails as DevStatus is 0x%08x\n", DevStatus));\r
+    DEBUG ((DEBUG_ERROR, "EmmcSwitchBusWidth: The switch operation fails as DevStatus is 0x%08x\n", DevStatus));\r
     return EFI_DEVICE_ERROR;\r
   }\r
 \r
@@ -686,20 +686,20 @@ EmmcSwitchClockFreq (
 \r
   Status = EmmcSwitch (PassThru, Slot, Access, Index, Value, CmdSet);\r
   if (EFI_ERROR (Status)) {\r
-    DEBUG ((EFI_D_ERROR, "EmmcSwitchClockFreq: Switch to hstiming %d fails with %r\n", HsTiming, Status));\r
+    DEBUG ((DEBUG_ERROR, "EmmcSwitchClockFreq: Switch to hstiming %d fails with %r\n", HsTiming, Status));\r
     return Status;\r
   }\r
 \r
   Status = EmmcSendStatus (PassThru, Slot, Rca, &DevStatus);\r
   if (EFI_ERROR (Status)) {\r
-    DEBUG ((EFI_D_ERROR, "EmmcSwitchClockFreq: Send status fails with %r\n", Status));\r
+    DEBUG ((DEBUG_ERROR, "EmmcSwitchClockFreq: Send status fails with %r\n", Status));\r
     return Status;\r
   }\r
   //\r
   // Check the switch operation is really successful or not.\r
   //\r
   if ((DevStatus & BIT7) != 0) {\r
-    DEBUG ((EFI_D_ERROR, "EmmcSwitchClockFreq: The switch operation fails as DevStatus is 0x%08x\n", DevStatus));\r
+    DEBUG ((DEBUG_ERROR, "EmmcSwitchClockFreq: The switch operation fails as DevStatus is 0x%08x\n", DevStatus));\r
     return EFI_DEVICE_ERROR;\r
   }\r
   //\r
@@ -995,13 +995,13 @@ EmmcSetBusMode (
 \r
   Status = EmmcGetCsd (PassThru, Slot, Rca, &Csd);\r
   if (EFI_ERROR (Status)) {\r
-    DEBUG ((EFI_D_ERROR, "EmmcSetBusMode: GetCsd fails with %r\n", Status));\r
+    DEBUG ((DEBUG_ERROR, "EmmcSetBusMode: GetCsd fails with %r\n", Status));\r
     return Status;\r
   }\r
 \r
   Status = EmmcSelect (PassThru, Slot, Rca);\r
   if (EFI_ERROR (Status)) {\r
-    DEBUG ((EFI_D_ERROR, "EmmcSetBusMode: Select fails with %r\n", Status));\r
+    DEBUG ((DEBUG_ERROR, "EmmcSetBusMode: Select fails with %r\n", Status));\r
     return Status;\r
   }\r
 \r
@@ -1019,7 +1019,7 @@ EmmcSetBusMode (
   //\r
   Status = EmmcGetExtCsd (PassThru, Slot, &ExtCsd);\r
   if (EFI_ERROR (Status)) {\r
-    DEBUG ((EFI_D_ERROR, "EmmcSetBusMode: GetExtCsd fails with %r\n", Status));\r
+    DEBUG ((DEBUG_ERROR, "EmmcSetBusMode: GetExtCsd fails with %r\n", Status));\r
     return Status;\r
   }\r
   //\r
@@ -1065,7 +1065,7 @@ EmmcSetBusMode (
     return EFI_SUCCESS;\r
   }\r
 \r
-  DEBUG ((EFI_D_INFO, "EmmcSetBusMode: HsTiming %d ClockFreq %d BusWidth %d Ddr %a\n", HsTiming, ClockFreq, BusWidth, IsDdr ? "TRUE":"FALSE"));\r
+  DEBUG ((DEBUG_INFO, "EmmcSetBusMode: HsTiming %d ClockFreq %d BusWidth %d Ddr %a\n", HsTiming, ClockFreq, BusWidth, IsDdr ? "TRUE":"FALSE"));\r
 \r
   if (HsTiming == 3) {\r
     //\r
@@ -1084,7 +1084,7 @@ EmmcSetBusMode (
     Status = EmmcSwitchToHighSpeed (PciIo, PassThru, Slot, Rca, ClockFreq, IsDdr, BusWidth);\r
   }\r
 \r
-  DEBUG ((EFI_D_INFO, "EmmcSetBusMode: Switch to %a %r\n", (HsTiming == 3) ? "HS400" : ((HsTiming == 2) ? "HS200" : "HighSpeed"), Status));\r
+  DEBUG ((DEBUG_INFO, "EmmcSetBusMode: Switch to %a %r\n", (HsTiming == 3) ? "HS400" : ((HsTiming == 2) ? "HS200" : "HighSpeed"), Status));\r
 \r
   return Status;\r
 }\r
@@ -1118,7 +1118,7 @@ EmmcIdentification (
 \r
   Status = EmmcReset (PassThru, Slot);\r
   if (EFI_ERROR (Status)) {\r
-    DEBUG ((EFI_D_VERBOSE, "EmmcIdentification: Executing Cmd0 fails with %r\n", Status));\r
+    DEBUG ((DEBUG_VERBOSE, "EmmcIdentification: Executing Cmd0 fails with %r\n", Status));\r
     return Status;\r
   }\r
 \r
@@ -1126,7 +1126,7 @@ EmmcIdentification (
   do {\r
     Status = EmmcGetOcr (PassThru, Slot, &Ocr);\r
     if (EFI_ERROR (Status)) {\r
-      DEBUG ((EFI_D_VERBOSE, "EmmcIdentification: Executing Cmd1 fails with %r\n", Status));\r
+      DEBUG ((DEBUG_VERBOSE, "EmmcIdentification: Executing Cmd1 fails with %r\n", Status));\r
       return Status;\r
     }\r
     Ocr |= BIT30;\r
@@ -1134,7 +1134,7 @@ EmmcIdentification (
 \r
   Status = EmmcGetAllCid (PassThru, Slot);\r
   if (EFI_ERROR (Status)) {\r
-    DEBUG ((EFI_D_VERBOSE, "EmmcIdentification: Executing Cmd2 fails with %r\n", Status));\r
+    DEBUG ((DEBUG_VERBOSE, "EmmcIdentification: Executing Cmd2 fails with %r\n", Status));\r
     return Status;\r
   }\r
   //\r
@@ -1146,13 +1146,13 @@ EmmcIdentification (
   Rca    = Slot + 1;\r
   Status = EmmcSetRca (PassThru, Slot, Rca);\r
   if (EFI_ERROR (Status)) {\r
-    DEBUG ((EFI_D_ERROR, "EmmcIdentification: Executing Cmd3 fails with %r\n", Status));\r
+    DEBUG ((DEBUG_ERROR, "EmmcIdentification: Executing Cmd3 fails with %r\n", Status));\r
     return Status;\r
   }\r
   //\r
   // Enter Data Tranfer Mode.\r
   //\r
-  DEBUG ((EFI_D_INFO, "EmmcIdentification: Found a EMMC device at slot [%d], RCA [%d]\n", Slot, Rca));\r
+  DEBUG ((DEBUG_INFO, "EmmcIdentification: Found a EMMC device at slot [%d], RCA [%d]\n", Slot, Rca));\r
   Private->Slot[Slot].CardType = EmmcCardType;\r
 \r
   Status = EmmcSetBusMode (PciIo, PassThru, Slot, Rca);\r