\r
Usb Bus Driver Binding and Bus IO Protocol.\r
\r
-Copyright (c) 2004 - 2011, Intel Corporation. All rights reserved.<BR>\r
+Copyright (c) 2004 - 2012, Intel Corporation. All rights reserved.<BR>\r
This program and the accompanying materials\r
are licensed and made available under the terms and conditions of the BSD License\r
which accompanies this distribution. The full text of the license may be found at\r
\r
#include "UsbBus.h"\r
\r
-//\r
-// USB_BUS_PROTOCOL is only used to locate USB_BUS\r
-//\r
-EFI_GUID mUsbBusProtocolGuid = EFI_USB_BUS_PROTOCOL_GUID;\r
-\r
EFI_USB_IO_PROTOCOL mUsbIoProtocol = {\r
UsbIoControlTransfer,\r
UsbIoBulkTransfer,\r
NULL\r
};\r
\r
-\r
/**\r
USB_IO function to execute a control transfer. This\r
function will execute the USB transfer. If transfer\r
// Clear TT buffer when CTRL/BULK split transaction failes\r
// Clear the TRANSLATOR TT buffer, not parent's buffer\r
//\r
- ASSERT (Dev->Translator.TranslatorHubAddress < USB_MAX_DEVICES);\r
+ ASSERT (Dev->Translator.TranslatorHubAddress < Dev->Bus->MaxDevices);\r
if (Dev->Translator.TranslatorHubAddress != 0) {\r
UsbHubCtrlClearTTBuffer (\r
Dev->Bus->Devices[Dev->Translator.TranslatorHubAddress],\r
// Clear TT buffer when CTRL/BULK split transaction failes.\r
// Clear the TRANSLATOR TT buffer, not parent's buffer\r
//\r
- ASSERT (Dev->Translator.TranslatorHubAddress < USB_MAX_DEVICES);\r
+ ASSERT (Dev->Translator.TranslatorHubAddress < Dev->Bus->MaxDevices);\r
if (Dev->Translator.TranslatorHubAddress != 0) {\r
UsbHubCtrlClearTTBuffer (\r
Dev->Bus->Devices[Dev->Translator.TranslatorHubAddress],\r
USB_INTERFACE *UsbIf;\r
USB_INTERFACE *HubIf;\r
USB_DEVICE *Dev;\r
- UINT8 Address;\r
EFI_TPL OldTpl;\r
EFI_STATUS Status;\r
\r
}\r
\r
//\r
- // Reset the device to its current address. The device now has a\r
- // address of ZERO, so need to set Dev->Address to zero first for\r
- // host to communicate with the device\r
+ // Reset the device to its current address. The device now has an address\r
+ // of ZERO after port reset, so need to set Dev->Address to the device again for\r
+ // host to communicate with it.\r
//\r
- Address = Dev->Address;\r
- Dev->Address = 0;\r
- Status = UsbSetAddress (Dev, Address);\r
+ Status = UsbSetAddress (Dev, Dev->Address);\r
\r
gBS->Stall (USB_SET_DEVICE_ADDRESS_STALL);\r
\r
if (EFI_ERROR (Status)) {\r
+ //\r
+ // It may fail due to device disconnection or other reasons.\r
+ //\r
DEBUG (( EFI_D_ERROR, "UsbIoPortReset: failed to set address for device %d - %r\n",\r
- Address, Status));\r
+ Dev->Address, Status));\r
\r
goto ON_EXIT;\r
}\r
\r
- Dev->Address = Address;\r
+ DEBUG (( EFI_D_INFO, "UsbIoPortReset: device is now ADDRESSED at %d\n", Dev->Address));\r
\r
- DEBUG (( EFI_D_INFO, "UsbIoPortReset: device is now ADDRESSED at %d\n", Address));\r
- \r
//\r
// Reset the current active configure, after this device\r
// is in CONFIGURED state.\r
\r
if (EFI_ERROR (Status)) {\r
DEBUG (( EFI_D_ERROR, "UsbIoPortReset: failed to set configure for device %d - %r\n",\r
- Address, Status));\r
+ Dev->Address, Status));\r
}\r
}\r
\r
return EFI_OUT_OF_RESOURCES;\r
}\r
\r
- UsbBus->Signature = USB_BUS_SIGNATURE;\r
- UsbBus->HostHandle = Controller;\r
+ UsbBus->Signature = USB_BUS_SIGNATURE;\r
+ UsbBus->HostHandle = Controller;\r
+ UsbBus->MaxDevices = USB_MAX_DEVICES;\r
\r
Status = gBS->OpenProtocol (\r
Controller,\r
goto CLOSE_HC;\r
}\r
\r
+ if (!EFI_ERROR (Status)) {\r
+ //\r
+ // The EFI_USB2_HC_PROTOCOL is produced for XHCI support.\r
+ // Then its max supported devices are 256. Otherwise it's 128.\r
+ //\r
+ if (UsbBus->Usb2Hc->MajorRevision == 0x3) {\r
+ UsbBus->MaxDevices = 256;\r
+ }\r
+ }\r
+\r
UsbHcReset (UsbBus, EFI_USB_HC_RESET_GLOBAL);\r
UsbHcSetState (UsbBus, EfiUsbHcStateOperational);\r
\r
//\r
Status = gBS->InstallProtocolInterface (\r
&Controller,\r
- &mUsbBusProtocolGuid,\r
+ &gEfiCallerIdGuid,\r
EFI_NATIVE_INTERFACE,\r
&UsbBus->BusId\r
);\r
RootHub->Bus = UsbBus;\r
RootHub->NumOfInterface = 1;\r
RootHub->Interfaces[0] = RootIf;\r
+ RootHub->Tier = 0;\r
RootIf->Signature = USB_INTERFACE_SIGNATURE;\r
RootIf->Device = RootHub;\r
RootIf->DevicePath = UsbBus->DevicePath;\r
-\r
+ \r
+ //\r
+ // Report Status Code here since we will enumerate the USB devices\r
+ //\r
+ REPORT_STATUS_CODE_WITH_DEVICE_PATH (\r
+ EFI_PROGRESS_CODE,\r
+ (EFI_IO_BUS_USB | EFI_IOB_PC_DETECT),\r
+ UsbBus->DevicePath\r
+ );\r
+ \r
Status = mUsbRootHubApi.Init (RootIf);\r
\r
if (EFI_ERROR (Status)) {\r
}\r
\r
UNINSTALL_USBBUS:\r
- gBS->UninstallProtocolInterface (Controller, &mUsbBusProtocolGuid, &UsbBus->BusId);\r
+ gBS->UninstallProtocolInterface (Controller, &gEfiCallerIdGuid, &UsbBus->BusId);\r
\r
CLOSE_HC:\r
if (UsbBus->Usb2Hc != NULL) {\r
{\r
EFI_USB_BUS_PROTOCOL *UsbBusId;\r
EFI_STATUS Status;\r
+ EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath;\r
+\r
+ Status = gBS->OpenProtocol (\r
+ Controller,\r
+ &gEfiDevicePathProtocolGuid,\r
+ (VOID **) &ParentDevicePath,\r
+ This->DriverBindingHandle,\r
+ Controller,\r
+ EFI_OPEN_PROTOCOL_GET_PROTOCOL\r
+ );\r
+ ASSERT_EFI_ERROR (Status);\r
+\r
+ //\r
+ // Report Status Code here since we will initialize the host controller\r
+ //\r
+ REPORT_STATUS_CODE_WITH_DEVICE_PATH (\r
+ EFI_PROGRESS_CODE,\r
+ (EFI_IO_BUS_USB | EFI_IOB_PC_INIT),\r
+ ParentDevicePath\r
+ );\r
\r
//\r
// Locate the USB bus protocol, if it is found, USB bus\r
//\r
Status = gBS->OpenProtocol (\r
Controller,\r
- &mUsbBusProtocolGuid,\r
+ &gEfiCallerIdGuid,\r
(VOID **) &UsbBusId,\r
This->DriverBindingHandle,\r
Controller,\r
//\r
Status = gBS->OpenProtocol (\r
Controller,\r
- &mUsbBusProtocolGuid,\r
+ &gEfiCallerIdGuid,\r
(VOID **) &UsbBusId,\r
This->DriverBindingHandle,\r
Controller,\r
//\r
Status = gBS->OpenProtocol (\r
Controller,\r
- &mUsbBusProtocolGuid,\r
+ &gEfiCallerIdGuid,\r
(VOID **) &BusId,\r
This->DriverBindingHandle,\r
Controller,\r
// BugBug: Raise TPL to callback level instead of USB_BUS_TPL to avoid TPL conflict\r
//\r
OldTpl = gBS->RaiseTPL (TPL_CALLBACK);\r
- UsbHcSetState (Bus, EfiUsbHcStateHalt);\r
\r
RootHub = Bus->Devices[0];\r
RootIf = RootHub->Interfaces[0];\r
\r
mUsbRootHubApi.Release (RootIf);\r
\r
- for (Index = 1; Index < USB_MAX_DEVICES; Index++) {\r
+ ASSERT (Bus->MaxDevices <= 256);\r
+ for (Index = 1; Index < Bus->MaxDevices; Index++) {\r
if (Bus->Devices[Index] != NULL) {\r
UsbRemoveDevice (Bus->Devices[Index]);\r
}\r
//\r
// Uninstall the bus identifier and close USB_HC/USB2_HC protocols\r
//\r
- gBS->UninstallProtocolInterface (Controller, &mUsbBusProtocolGuid, &Bus->BusId);\r
+ gBS->UninstallProtocolInterface (Controller, &gEfiCallerIdGuid, &Bus->BusId);\r
\r
if (Bus->Usb2Hc != NULL) {\r
gBS->CloseProtocol (\r
projects / mirror_edk2.git / blobdiff