/** @file\r
+ Definitions of functions for Driver Binding Protocol and Block I/O Protocol,\r
+ and other internal definitions.\r
\r
-Copyright (c) 2007 - 2008, Intel Corporation\r
-All rights reserved. This program and the accompanying materials\r
+Copyright (c) 2007 - 2008, Intel Corporation. All rights reserved.<BR>\r
+This program and the accompanying materials\r
are licensed and made available under the terms and conditions of the BSD License\r
which accompanies this distribution. The full text of the license may be found at\r
http://opensource.org/licenses/bsd-license.php\r
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
\r
-Module Name:\r
-\r
- UsbMassImpl.h\r
-\r
-Abstract:\r
-\r
- The implementation of USB mass storage class device driver.\r
-\r
-Revision History\r
-\r
-\r
**/\r
\r
#ifndef _EFI_USBMASS_IMPL_H_\r
#define _EFI_USBMASS_IMPL_H_\r
\r
-typedef struct _USB_MASS_DEVICE USB_MASS_DEVICE;\r
-\r
#include "UsbMass.h"\r
#include "UsbMassBot.h"\r
#include "UsbMassCbi.h"\r
#include "UsbMassBoot.h"\r
\r
-enum {\r
- //\r
- // MassStorage raises TPL to TPL_NOTIFY to serialize all its operations\r
- // to protect shared data structures.\r
- //\r
- USB_MASS_TPL = TPL_NOTIFY,\r
- \r
- USB_MASS_SIGNATURE = EFI_SIGNATURE_32 ('U', 's', 'b', 'M')\r
-};\r
-\r
-struct _USB_MASS_DEVICE {\r
- UINT32 Signature;\r
- EFI_HANDLE Controller;\r
- EFI_USB_IO_PROTOCOL *UsbIo;\r
- EFI_DEVICE_PATH_PROTOCOL *DevicePath;\r
- EFI_BLOCK_IO_PROTOCOL BlockIo;\r
- EFI_BLOCK_IO_MEDIA BlockIoMedia;\r
- BOOLEAN OpticalStorage;\r
- UINT8 Lun; // Logical Unit Number\r
- UINT8 Pdt; // Peripheral Device Type\r
- USB_MASS_TRANSPORT *Transport; // USB mass storage transport protocol\r
- VOID *Context; // Opaque storage for mass transport\r
-};\r
-\r
-#define USB_MASS_DEVICE_FROM_BLOCKIO(a) \\r
+#define USB_MASS_SIGNATURE SIGNATURE_32 ('U', 's', 'b', 'M')\r
+\r
+#define USB_MASS_DEVICE_FROM_BLOCK_IO(a) \\r
CR (a, USB_MASS_DEVICE, BlockIo, USB_MASS_SIGNATURE)\r
\r
extern EFI_COMPONENT_NAME_PROTOCOL gUsbMassStorageComponentName;\r
extern EFI_COMPONENT_NAME2_PROTOCOL gUsbMassStorageComponentName2;\r
\r
+//\r
+// Functions for Driver Binding Protocol\r
+//\r
+\r
+/**\r
+ Check whether the controller is a supported USB mass storage.\r
+\r
+ @param This The USB mass storage driver binding protocol.\r
+ @param Controller The controller handle to check.\r
+ @param RemainingDevicePath The remaining device path.\r
+\r
+ @retval EFI_SUCCESS The driver supports this controller.\r
+ @retval other This device isn't supported.\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+USBMassDriverBindingSupported (\r
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,\r
+ IN EFI_HANDLE Controller,\r
+ IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath\r
+ );\r
+\r
+/**\r
+ Starts the USB mass storage device with this driver.\r
+\r
+ This function consumes USB I/O Portocol, intializes USB mass storage device,\r
+ installs Block I/O Protocol, and submits Asynchronous Interrupt\r
+ Transfer to manage the USB mass storage device.\r
+\r
+ @param This The USB mass storage driver binding protocol.\r
+ @param Controller The USB mass storage device to start on\r
+ @param RemainingDevicePath The remaining device path.\r
+\r
+ @retval EFI_SUCCESS This driver supports this device.\r
+ @retval EFI_UNSUPPORTED This driver does not support this device.\r
+ @retval EFI_DEVICE_ERROR This driver cannot be started due to device Error.\r
+ @retval EFI_OUT_OF_RESOURCES Can't allocate memory resources.\r
+ @retval EFI_ALREADY_STARTED This driver has been started.\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+USBMassDriverBindingStart (\r
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,\r
+ IN EFI_HANDLE Controller,\r
+ IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath\r
+ );\r
+\r
+/**\r
+ Stop controlling the device.\r
+\r
+ @param This The USB mass storage driver binding\r
+ @param Controller The device controller controlled by the driver.\r
+ @param NumberOfChildren The number of children of this device\r
+ @param ChildHandleBuffer The buffer of children handle.\r
+\r
+ @retval EFI_SUCCESS The driver stopped from controlling the device.\r
+ @retval EFI_DEVICE_ERROR The device could not be stopped due to a device error.\r
+ @retval EFI_UNSUPPORTED Block I/O Protocol is not installed on Controller.\r
+ @retval Others Failed to stop the driver\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+USBMassDriverBindingStop (\r
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,\r
+ IN EFI_HANDLE Controller,\r
+ IN UINTN NumberOfChildren,\r
+ IN EFI_HANDLE *ChildHandleBuffer\r
+ );\r
+\r
+//\r
+// Functions for Block I/O Protocol\r
+//\r
+\r
+/**\r
+ Reset the block device.\r
+\r
+ This function implements EFI_BLOCK_IO_PROTOCOL.Reset(). \r
+ It resets the block device hardware.\r
+ ExtendedVerification is ignored in this implementation.\r
+\r
+ @param This Indicates a pointer to the calling context.\r
+ @param ExtendedVerification Indicates that the driver may perform a more exhaustive\r
+ verification operation of the device during reset.\r
+\r
+ @retval EFI_SUCCESS The block device was reset.\r
+ @retval EFI_DEVICE_ERROR The block device is not functioning correctly and could not be reset.\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+UsbMassReset (\r
+ IN EFI_BLOCK_IO_PROTOCOL *This,\r
+ IN BOOLEAN ExtendedVerification\r
+ );\r
+\r
+/**\r
+ Reads the requested number of blocks from the device.\r
+\r
+ This function implements EFI_BLOCK_IO_PROTOCOL.ReadBlocks(). \r
+ It reads the requested number of blocks from the device.\r
+ All the blocks are read, or an error is returned.\r
+\r
+ @param This Indicates a pointer to the calling context.\r
+ @param MediaId The media ID that the read request is for.\r
+ @param Lba The starting logical block address to read from on the device.\r
+ @param BufferSize The size of the Buffer in bytes.\r
+ This must be a multiple of the intrinsic block size of the device.\r
+ @param Buffer A pointer to the destination buffer for the data. The caller is\r
+ responsible for either having implicit or explicit ownership of the buffer.\r
+\r
+ @retval EFI_SUCCESS The data was read correctly from the device.\r
+ @retval EFI_DEVICE_ERROR The device reported an error while attempting to perform the read operation.\r
+ @retval EFI_NO_MEDIA There is no media in the device.\r
+ @retval EFI_MEDIA_CHANGED The MediaId is not for the current media.\r
+ @retval EFI_BAD_BUFFER_SIZE The BufferSize parameter is not a multiple of the intrinsic block size of the device.\r
+ @retval EFI_INVALID_PARAMETER The read request contains LBAs that are not valid,\r
+ or the buffer is not on proper alignment.\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+UsbMassReadBlocks (\r
+ IN EFI_BLOCK_IO_PROTOCOL *This,\r
+ IN UINT32 MediaId,\r
+ IN EFI_LBA Lba,\r
+ IN UINTN BufferSize,\r
+ OUT VOID *Buffer\r
+ );\r
+\r
+/**\r
+ Writes a specified number of blocks to the device.\r
+\r
+ This function implements EFI_BLOCK_IO_PROTOCOL.WriteBlocks(). \r
+ It writes a specified number of blocks to the device.\r
+ All blocks are written, or an error is returned.\r
+\r
+ @param This Indicates a pointer to the calling context.\r
+ @param MediaId The media ID that the write request is for.\r
+ @param Lba The starting logical block address to be written.\r
+ @param BufferSize The size of the Buffer in bytes.\r
+ This must be a multiple of the intrinsic block size of the device.\r
+ @param Buffer Pointer to the source buffer for the data.\r
+\r
+ @retval EFI_SUCCESS The data were written correctly to the device.\r
+ @retval EFI_WRITE_PROTECTED The device cannot be written to.\r
+ @retval EFI_NO_MEDIA There is no media in the device.\r
+ @retval EFI_MEDIA_CHANGED The MediaId is not for the current media.\r
+ @retval EFI_DEVICE_ERROR The device reported an error while attempting to perform the write operation.\r
+ @retval EFI_BAD_BUFFER_SIZE The BufferSize parameter is not a multiple of the intrinsic\r
+ block size of the device.\r
+ @retval EFI_INVALID_PARAMETER The write request contains LBAs that are not valid,\r
+ or the buffer is not on proper alignment.\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+UsbMassWriteBlocks (\r
+ IN EFI_BLOCK_IO_PROTOCOL *This,\r
+ IN UINT32 MediaId,\r
+ IN EFI_LBA Lba,\r
+ IN UINTN BufferSize,\r
+ IN VOID *Buffer\r
+ );\r
+\r
+/**\r
+ Flushes all modified data to a physical block device.\r
+\r
+ This function implements EFI_BLOCK_IO_PROTOCOL.FlushBlocks().\r
+ USB mass storage device doesn't support write cache,\r
+ so return EFI_SUCCESS directly.\r
+\r
+ @param This Indicates a pointer to the calling context.\r
+\r
+ @retval EFI_SUCCESS All outstanding data were written correctly to the device.\r
+ @retval EFI_DEVICE_ERROR The device reported an error while attempting to write data.\r
+ @retval EFI_NO_MEDIA There is no media in the device.\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+UsbMassFlushBlocks (\r
+ IN EFI_BLOCK_IO_PROTOCOL *This\r
+ );\r
+\r
+//\r
+// EFI Component Name Functions\r
+//\r
+\r
+/**\r
+ Retrieves a Unicode string that is the user readable name of the driver.\r
+\r
+ This function retrieves the user readable name of a driver in the form of a\r
+ Unicode string. If the driver specified by This has a user readable name in\r
+ the language specified by Language, then a pointer to the driver name is\r
+ returned in DriverName, and EFI_SUCCESS is returned. If the driver specified\r
+ by This does not support the language specified by Language,\r
+ then EFI_UNSUPPORTED is returned.\r
+\r
+ @param This A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or\r
+ EFI_COMPONENT_NAME_PROTOCOL instance.\r
+ @param Language A pointer to a Null-terminated ASCII string\r
+ array indicating the language. This is the\r
+ language of the driver name that the caller is\r
+ requesting, and it must match one of the\r
+ languages specified in SupportedLanguages. The\r
+ number of languages supported by a driver is up\r
+ to the driver writer. Language is specified\r
+ in RFC 4646 or ISO 639-2 language code format.\r
+ @param DriverName A pointer to the Unicode string to return.\r
+ This Unicode string is the name of the\r
+ driver specified by This in the language\r
+ specified by Language.\r
+\r
+ @retval EFI_SUCCESS The Unicode string for the Driver specified by\r
+ This and the language specified by Language was\r
+ returned in DriverName.\r
+ @retval EFI_INVALID_PARAMETER Language is NULL.\r
+ @retval EFI_INVALID_PARAMETER DriverName is NULL.\r
+ @retval EFI_UNSUPPORTED The driver specified by This does not support\r
+ the language specified by Language.\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+UsbMassStorageGetDriverName (\r
+ IN EFI_COMPONENT_NAME_PROTOCOL *This,\r
+ IN CHAR8 *Language,\r
+ OUT CHAR16 **DriverName\r
+ );\r
+\r
+\r
+/**\r
+ Retrieves a Unicode string that is the user readable name of the controller\r
+ that is being managed by a driver.\r
+\r
+ This function retrieves the user readable name of the controller specified by\r
+ ControllerHandle and ChildHandle in the form of a Unicode string. If the\r
+ driver specified by This has a user readable name in the language specified by\r
+ Language, then a pointer to the controller name is returned in ControllerName,\r
+ and EFI_SUCCESS is returned. If the driver specified by This is not currently\r
+ managing the controller specified by ControllerHandle and ChildHandle,\r
+ then EFI_UNSUPPORTED is returned. If the driver specified by This does not\r
+ support the language specified by Language, then EFI_UNSUPPORTED is returned.\r
+\r
+ @param This A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or\r
+ EFI_COMPONENT_NAME_PROTOCOL instance.\r
+ @param ControllerHandle The handle of a controller that the driver\r
+ specified by This is managing. This handle\r
+ specifies the controller whose name is to be\r
+ returned.\r
+ @param ChildHandle The handle of the child controller to retrieve\r
+ the name of. This is an optional parameter that\r
+ may be NULL. It will be NULL for device\r
+ drivers. It will also be NULL for a bus drivers\r
+ that wish to retrieve the name of the bus\r
+ controller. It will not be NULL for a bus\r
+ driver that wishes to retrieve the name of a\r
+ child controller.\r
+ @param Language A pointer to a Null-terminated ASCII string\r
+ array indicating the language. This is the\r
+ language of the driver name that the caller is\r
+ requesting, and it must match one of the\r
+ languages specified in SupportedLanguages. The\r
+ number of languages supported by a driver is up\r
+ to the driver writer. Language is specified in\r
+ RFC 4646 or ISO 639-2 language code format.\r
+ @param ControllerName A pointer to the Unicode string to return.\r
+ This Unicode string is the name of the\r
+ controller specified by ControllerHandle and\r
+ ChildHandle in the language specified by\r
+ Language from the point of view of the driver\r
+ specified by This.\r
+\r
+ @retval EFI_SUCCESS The Unicode string for the user readable name in\r
+ the language specified by Language for the\r
+ driver specified by This was returned in\r
+ DriverName.\r
+ @retval EFI_INVALID_PARAMETER ControllerHandle is not a valid EFI_HANDLE.\r
+ @retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a valid\r
+ EFI_HANDLE.\r
+ @retval EFI_INVALID_PARAMETER Language is NULL.\r
+ @retval EFI_INVALID_PARAMETER ControllerName is NULL.\r
+ @retval EFI_UNSUPPORTED The driver specified by This is not currently\r
+ managing the controller specified by\r
+ ControllerHandle and ChildHandle.\r
+ @retval EFI_UNSUPPORTED The driver specified by This does not support\r
+ the language specified by Language.\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+UsbMassStorageGetControllerName (\r
+ IN EFI_COMPONENT_NAME_PROTOCOL *This,\r
+ IN EFI_HANDLE ControllerHandle,\r
+ IN EFI_HANDLE ChildHandle OPTIONAL,\r
+ IN CHAR8 *Language,\r
+ OUT CHAR16 **ControllerName\r
+ );\r
+\r
#endif\r
projects / mirror_edk2.git / blobdiff