Last PEIM.\r
Responsibility of this module is to load the DXE Core from a Firmware Volume.\r
\r
-Copyright (c) 2006 - 2008, Intel Corporation. <BR>\r
-All rights reserved. This program and the accompanying materials\r
+Copyright (c) 2006 - 2010, Intel Corporation. All rights reserved.<BR>\r
+This program and the accompanying materials\r
are licensed and made available under the terms and conditions of the BSD License\r
which accompanies this distribution. The full text of the license may be found at\r
http://opensource.org/licenses/bsd-license.php\r
\r
#include "DxeIpl.h"\r
\r
-//\r
-// This global variable indicates whether this module has been shadowed\r
-// to memory.\r
-//\r
-BOOLEAN gInMemory = FALSE;\r
\r
//\r
-// Module Globals used in the DXE to PEI handoff\r
+// Module Globals used in the DXE to PEI hand off\r
// These must be module globals, so the stack can be switched\r
//\r
CONST EFI_DXE_IPL_PPI mDxeIplPpi = {\r
Decompress\r
};\r
\r
-CONST EFI_PEI_PPI_DESCRIPTOR mPpiList[] = {\r
+CONST EFI_PEI_PPI_DESCRIPTOR mPpiList[] = {\r
{\r
EFI_PEI_PPI_DESCRIPTOR_PPI,\r
&gEfiDxeIplPpiGuid,\r
}\r
};\r
\r
-CONST EFI_PEI_PPI_DESCRIPTOR gEndOfPeiSignalPpi = {\r
+CONST EFI_PEI_PPI_DESCRIPTOR gEndOfPeiSignalPpi = {\r
(EFI_PEI_PPI_DESCRIPTOR_PPI | EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST),\r
&gEfiEndOfPeiSignalPpiGuid,\r
NULL\r
};\r
\r
/**\r
- Initializes the Dxe Ipl PPI\r
+ Entry point of DXE IPL PEIM.\r
+ \r
+ This function installs DXE IPL PPI and Decompress PPI. It also reloads\r
+ itself to memory on non-S3 resume boot path.\r
\r
@param FileHandle Handle of the file being invoked.\r
@param PeiServices Describes the list of possible PEI Services.\r
\r
- @return EFI_SUCESS\r
+ @retval EFI_SUCESS The entry point of DXE IPL PEIM executes successfully.\r
+ @retval Others Some error occurs during the execution of this function. \r
+\r
**/\r
EFI_STATUS\r
EFIAPI\r
Status = PeiServicesRegisterForShadow (FileHandle);\r
if (Status == EFI_SUCCESS) {\r
//\r
- // EFI_SUCESS means the first time call register for shadow \r
+ // EFI_SUCESS means it is the first time to call register for shadow. \r
// \r
return Status;\r
- } else if (Status == EFI_ALREADY_STARTED) {\r
+ }\r
+ \r
+ //\r
+ // Ensure that DXE IPL is shadowed to permanent memory.\r
+ //\r
+ ASSERT (Status == EFI_ALREADY_STARTED);\r
\r
- //\r
- // Get custom extract guided section method guid list \r
- //\r
- ExtractHandlerNumber = ExtractGuidedSectionGetGuidList (&ExtractHandlerGuidTable);\r
- \r
- //\r
- // Install custom extraction guid ppi\r
- //\r
- if (ExtractHandlerNumber > 0) {\r
- GuidPpi = (EFI_PEI_PPI_DESCRIPTOR *) AllocatePool (ExtractHandlerNumber * sizeof (EFI_PEI_PPI_DESCRIPTOR));\r
- ASSERT (GuidPpi != NULL);\r
- while (ExtractHandlerNumber-- > 0) {\r
- GuidPpi->Flags = EFI_PEI_PPI_DESCRIPTOR_PPI | EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST;\r
- GuidPpi->Ppi = (VOID *) &mCustomGuidedSectionExtractionPpi;\r
- GuidPpi->Guid = &(ExtractHandlerGuidTable [ExtractHandlerNumber]);\r
- Status = PeiServicesInstallPpi (GuidPpi++);\r
- ASSERT_EFI_ERROR(Status);\r
- }\r
+ //\r
+ // Get custom extract guided section method guid list \r
+ //\r
+ ExtractHandlerNumber = ExtractGuidedSectionGetGuidList (&ExtractHandlerGuidTable);\r
+ \r
+ //\r
+ // Install custom extraction guid PPI\r
+ //\r
+ if (ExtractHandlerNumber > 0) {\r
+ GuidPpi = (EFI_PEI_PPI_DESCRIPTOR *) AllocatePool (ExtractHandlerNumber * sizeof (EFI_PEI_PPI_DESCRIPTOR));\r
+ ASSERT (GuidPpi != NULL);\r
+ while (ExtractHandlerNumber-- > 0) {\r
+ GuidPpi->Flags = EFI_PEI_PPI_DESCRIPTOR_PPI | EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST;\r
+ GuidPpi->Ppi = (VOID *) &mCustomGuidedSectionExtractionPpi;\r
+ GuidPpi->Guid = &ExtractHandlerGuidTable[ExtractHandlerNumber];\r
+ Status = PeiServicesInstallPpi (GuidPpi++);\r
+ ASSERT_EFI_ERROR(Status);\r
}\r
- } else {\r
- ASSERT (FALSE);\r
}\r
+ \r
}\r
\r
//\r
\r
/**\r
Main entry point to last PEIM. \r
+\r
+ This function finds DXE Core in the firmware volume and transfer the control to\r
+ DXE core.\r
\r
@param This Entry point for DXE IPL PPI.\r
@param PeiServices General purpose services available to every PEIM.\r
EFI_BOOT_MODE BootMode;\r
EFI_PEI_FILE_HANDLE FileHandle;\r
EFI_PEI_READ_ONLY_VARIABLE2_PPI *Variable;\r
+ EFI_PEI_LOAD_FILE_PPI *LoadFile;\r
+ UINTN Instance;\r
+ UINT32 AuthenticationState;\r
UINTN DataSize;\r
+ EFI_PEI_S3_RESUME2_PPI *S3Resume;\r
+ EFI_PEI_RECOVERY_MODULE_PPI *PeiRecovery;\r
EFI_MEMORY_TYPE_INFORMATION MemoryData[EfiMaxMemoryType + 1];\r
\r
//\r
BootMode = GetBootModeHob ();\r
\r
if (BootMode == BOOT_ON_S3_RESUME) {\r
- Status = AcpiS3ResumeOs();\r
+ Status = PeiServicesLocatePpi (\r
+ &gEfiPeiS3Resume2PpiGuid,\r
+ 0,\r
+ NULL,\r
+ (VOID **) &S3Resume\r
+ );\r
+ ASSERT_EFI_ERROR (Status);\r
+ \r
+ Status = S3Resume->S3RestoreConfig2 (S3Resume);\r
ASSERT_EFI_ERROR (Status);\r
} else if (BootMode == BOOT_IN_RECOVERY_MODE) {\r
- Status = PeiRecoverFirmware ();\r
+ Status = PeiServicesLocatePpi (\r
+ &gEfiPeiRecoveryModulePpiGuid,\r
+ 0,\r
+ NULL,\r
+ (VOID **) &PeiRecovery\r
+ );\r
+ ASSERT_EFI_ERROR (Status);\r
+ \r
+ Status = PeiRecovery->LoadRecoveryCapsule (PeiServices, PeiRecovery);\r
if (EFI_ERROR (Status)) {\r
DEBUG ((DEBUG_ERROR, "Load Recovery Capsule Failed.(Status = %r)\n", Status));\r
CpuDeadLoop ();\r
}\r
\r
//\r
- // Now should have a HOB with the DXE core w/ the old HOB destroyed\r
+ // Now should have a HOB with the DXE core\r
//\r
}\r
\r
FileHandle = DxeIplFindDxeCore ();\r
\r
//\r
- // Load the DXE Core from a Firmware Volume, may use LoadFile ppi to do this for save code size.\r
+ // Load the DXE Core from a Firmware Volume.\r
//\r
- Status = PeiLoadFile (\r
- FileHandle,\r
- &DxeCoreAddress,\r
- &DxeCoreSize,\r
- &DxeCoreEntryPoint\r
- );\r
- ASSERT_EFI_ERROR (Status);\r
+ Instance = 0;\r
+ do {\r
+ Status = PeiServicesLocatePpi (&gEfiPeiLoadFilePpiGuid, Instance++, NULL, (VOID **) &LoadFile);\r
+ //\r
+ // These must exist an instance of EFI_PEI_LOAD_FILE_PPI to support to load DxeCore file handle successfully.\r
+ //\r
+ ASSERT_EFI_ERROR (Status);\r
+\r
+ Status = LoadFile->LoadFile (\r
+ LoadFile,\r
+ FileHandle,\r
+ &DxeCoreAddress,\r
+ &DxeCoreSize,\r
+ &DxeCoreEntryPoint,\r
+ &AuthenticationState\r
+ );\r
+ } while (EFI_ERROR (Status));\r
\r
//\r
// Get the DxeCore File Info from the FileHandle for the DxeCore GUID file name.\r
BuildModuleHob (\r
&DxeCoreFileInfo.FileName,\r
DxeCoreAddress,\r
- EFI_SIZE_TO_PAGES ((UINTN) DxeCoreSize) * EFI_PAGE_SIZE,\r
+ ALIGN_VALUE (DxeCoreSize, EFI_PAGE_SIZE),\r
DxeCoreEntryPoint\r
);\r
\r
//\r
// Report Status Code EFI_SW_PEI_PC_HANDOFF_TO_NEXT\r
//\r
- REPORT_STATUS_CODE (\r
- EFI_PROGRESS_CODE,\r
- PcdGet32(PcdStatusCodeValuePeiHandoffToDxe)\r
- );\r
+ REPORT_STATUS_CODE (EFI_PROGRESS_CODE, (EFI_SOFTWARE_PEI_CORE | EFI_SW_PEI_CORE_PC_HANDOFF_TO_NEXT));\r
\r
- DEBUG ((DEBUG_INFO | DEBUG_LOAD, "Loading DXE CORE at 0x%11p EntryPoint=0x%11p\n", (VOID *)(UINTN)DxeCoreAddress, FUNCTION_ENTRY_POINT ((UINTN) DxeCoreEntryPoint)));\r
+ DEBUG ((DEBUG_INFO | DEBUG_LOAD, "Loading DXE CORE at 0x%11p EntryPoint=0x%11p\n", (VOID *)(UINTN)DxeCoreAddress, FUNCTION_ENTRY_POINT (DxeCoreEntryPoint)));\r
\r
//\r
// Transfer control to the DXE Core\r
- // The handoff state is simply a pointer to the HOB list\r
+ // The hand off state is simply a pointer to the HOB list\r
//\r
HandOffToDxeCore (DxeCoreEntryPoint, HobList);\r
//\r
// If we get here, then the DXE Core returned. This is an error\r
- // Dxe Core should not return.\r
+ // DxeCore should not return.\r
//\r
ASSERT (FALSE);\r
CpuDeadLoop ();\r
}\r
\r
\r
-/**\r
- Loads and relocates a PE/COFF image into memory.\r
-\r
- @param FileHandle The image file handle\r
- @param ImageAddress The base address of the relocated PE/COFF image\r
- @param ImageSize The size of the relocated PE/COFF image\r
- @param EntryPoint The entry point of the relocated PE/COFF image\r
- \r
- @return EFI_SUCCESS The file was loaded and relocated\r
- @return EFI_OUT_OF_RESOURCES There was not enough memory to load and relocate the PE/COFF file\r
-\r
-**/\r
-EFI_STATUS\r
-PeiLoadFile (\r
- IN EFI_PEI_FILE_HANDLE FileHandle,\r
- OUT EFI_PHYSICAL_ADDRESS *ImageAddress,\r
- OUT UINT64 *ImageSize,\r
- OUT EFI_PHYSICAL_ADDRESS *EntryPoint\r
- )\r
-{\r
-\r
- EFI_STATUS Status;\r
- PE_COFF_LOADER_IMAGE_CONTEXT ImageContext;\r
- VOID *Pe32Data;\r
-\r
- //\r
- // First try to find the PE32 section in this ffs file.\r
- //\r
- Status = PeiServicesFfsFindSectionData (\r
- EFI_SECTION_PE32,\r
- FileHandle,\r
- &Pe32Data\r
- );\r
- if (EFI_ERROR (Status)) {\r
- //\r
- // NO image types we support so exit.\r
- //\r
- return Status;\r
- }\r
-\r
- ZeroMem (&ImageContext, sizeof (ImageContext));\r
- ImageContext.Handle = Pe32Data;\r
- Status = GetImageReadFunction (&ImageContext);\r
-\r
- ASSERT_EFI_ERROR (Status);\r
-\r
- Status = PeCoffLoaderGetImageInfo (&ImageContext);\r
- if (EFI_ERROR (Status)) {\r
- return Status;\r
- }\r
- //\r
- // Allocate Memory for the image\r
- //\r
- Status = PeiServicesAllocatePages (\r
- EfiBootServicesCode, \r
- EFI_SIZE_TO_PAGES ((UINT32) ImageContext.ImageSize), \r
- &ImageContext.ImageAddress\r
- );\r
- ASSERT_EFI_ERROR (Status);\r
- ASSERT (ImageContext.ImageAddress != 0);\r
-\r
- //\r
- // Load the image to our new buffer\r
- //\r
- Status = PeCoffLoaderLoadImage (&ImageContext);\r
- if (EFI_ERROR (Status)) {\r
- return Status;\r
- }\r
- //\r
- // Relocate the image in our new buffer\r
- //\r
- Status = PeCoffLoaderRelocateImage (&ImageContext);\r
- if (EFI_ERROR (Status)) {\r
- return Status;\r
- }\r
-\r
- //\r
- // Flush the instruction cache so the image data is written before we execute it\r
- //\r
- InvalidateInstructionCacheRange ((VOID *)(UINTN)ImageContext.ImageAddress, (UINTN)ImageContext.ImageSize);\r
-\r
- *ImageAddress = ImageContext.ImageAddress;\r
- *ImageSize = ImageContext.ImageSize;\r
- *EntryPoint = ImageContext.EntryPoint;\r
-\r
- return EFI_SUCCESS;\r
-}\r
-\r
-\r
-\r
\r
/**\r
The ExtractSection() function processes the input section and\r
\r
**/\r
EFI_STATUS\r
+EFIAPI\r
CustomGuidedSectionExtract (\r
IN CONST EFI_PEI_GUIDED_SECTION_EXTRACTION_PPI *This,\r
IN CONST VOID *InputSection,\r
if (*OutputBuffer == NULL) {\r
return EFI_OUT_OF_RESOURCES;\r
}\r
- DEBUG ((DEBUG_INFO, "Customed Guided section Memory Size required is 0x%x and address is 0x%p\n", OutputBufferSize, *OutputBuffer));\r
+ DEBUG ((DEBUG_INFO, "Customized Guided section Memory Size required is 0x%x and address is 0x%p\n", OutputBufferSize, *OutputBuffer));\r
//\r
// *OutputBuffer still is one section. Adjust *OutputBuffer offset, \r
// skip EFI section header to make section data at page alignment.\r
OutputBuffer,\r
ScratchBuffer,\r
AuthenticationStatus\r
- );\r
+ );\r
if (EFI_ERROR (Status)) {\r
//\r
// Decode failed\r
/**\r
Decompresses a section to the output buffer.\r
\r
- This function lookes up the compression type field in the input section and\r
+ This function looks up the compression type field in the input section and\r
applies the appropriate compression algorithm to compress the section to a\r
callee allocated buffer.\r
\r
EFI_STATUS Status;\r
UINT8 *DstBuffer;\r
UINT8 *ScratchBuffer;\r
- UINTN DstBufferSize;\r
+ UINT32 DstBufferSize;\r
UINT32 ScratchBufferSize;\r
EFI_COMMON_SECTION_HEADER *Section;\r
- UINTN SectionLength;\r
+ UINT32 SectionLength;\r
\r
if (CompressionSection->CommonHeader.Type != EFI_SECTION_COMPRESSION) {\r
ASSERT (FALSE);\r
//\r
switch (CompressionSection->CompressionType) {\r
case EFI_STANDARD_COMPRESSION:\r
- //\r
- // Load EFI standard compression.\r
- // For compressed data, decompress them to dstbuffer.\r
- //\r
- Status = UefiDecompressGetInfo (\r
- (UINT8 *) ((EFI_COMPRESSION_SECTION *) Section + 1),\r
- (UINT32) SectionLength - sizeof (EFI_COMPRESSION_SECTION),\r
- (UINT32 *) &DstBufferSize,\r
- &ScratchBufferSize\r
- );\r
- if (EFI_ERROR (Status)) {\r
+ if (FeaturePcdGet(PcdDxeIplSupportUefiDecompress)) {\r
//\r
- // GetInfo failed\r
+ // Load EFI standard compression.\r
+ // For compressed data, decompress them to destination buffer.\r
//\r
- DEBUG ((DEBUG_ERROR, "Decompress GetInfo Failed - %r\n", Status));\r
- return EFI_NOT_FOUND;\r
- }\r
- //\r
- // Allocate scratch buffer\r
- //\r
- ScratchBuffer = AllocatePages (EFI_SIZE_TO_PAGES (ScratchBufferSize));\r
- if (ScratchBuffer == NULL) {\r
- return EFI_OUT_OF_RESOURCES;\r
- }\r
- //\r
- // Allocate destination buffer, extra one page for adjustment \r
- //\r
- DstBuffer = AllocatePages (EFI_SIZE_TO_PAGES (DstBufferSize) + 1);\r
- if (DstBuffer == NULL) {\r
- return EFI_OUT_OF_RESOURCES;\r
- }\r
- //\r
- // DstBuffer still is one section. Adjust DstBuffer offset, skip EFI section header\r
- // to make section data at page alignment.\r
- //\r
- DstBuffer = DstBuffer + EFI_PAGE_SIZE - sizeof (EFI_COMMON_SECTION_HEADER);\r
- //\r
- // Call decompress function\r
- //\r
- Status = UefiDecompress (\r
- (CHAR8 *) ((EFI_COMPRESSION_SECTION *) Section + 1),\r
- DstBuffer,\r
- ScratchBuffer\r
- );\r
- if (EFI_ERROR (Status)) {\r
+ Status = UefiDecompressGetInfo (\r
+ (UINT8 *) ((EFI_COMPRESSION_SECTION *) Section + 1),\r
+ SectionLength - sizeof (EFI_COMPRESSION_SECTION),\r
+ &DstBufferSize,\r
+ &ScratchBufferSize\r
+ );\r
+ if (EFI_ERROR (Status)) {\r
+ //\r
+ // GetInfo failed\r
+ //\r
+ DEBUG ((DEBUG_ERROR, "Decompress GetInfo Failed - %r\n", Status));\r
+ return EFI_NOT_FOUND;\r
+ }\r
+ //\r
+ // Allocate scratch buffer\r
//\r
- // Decompress failed\r
+ ScratchBuffer = AllocatePages (EFI_SIZE_TO_PAGES (ScratchBufferSize));\r
+ if (ScratchBuffer == NULL) {\r
+ return EFI_OUT_OF_RESOURCES;\r
+ }\r
+ //\r
+ // Allocate destination buffer, extra one page for adjustment \r
+ //\r
+ DstBuffer = AllocatePages (EFI_SIZE_TO_PAGES (DstBufferSize) + 1);\r
+ if (DstBuffer == NULL) {\r
+ return EFI_OUT_OF_RESOURCES;\r
+ }\r
+ //\r
+ // DstBuffer still is one section. Adjust DstBuffer offset, skip EFI section header\r
+ // to make section data at page alignment.\r
+ //\r
+ DstBuffer = DstBuffer + EFI_PAGE_SIZE - sizeof (EFI_COMMON_SECTION_HEADER);\r
+ //\r
+ // Call decompress function\r
+ //\r
+ Status = UefiDecompress (\r
+ (CHAR8 *) ((EFI_COMPRESSION_SECTION *) Section + 1),\r
+ DstBuffer,\r
+ ScratchBuffer\r
+ );\r
+ if (EFI_ERROR (Status)) {\r
+ //\r
+ // Decompress failed\r
+ //\r
+ DEBUG ((DEBUG_ERROR, "Decompress Failed - %r\n", Status));\r
+ return EFI_NOT_FOUND;\r
+ }\r
+ break;\r
+ } else {\r
+ //\r
+ // PcdDxeIplSupportUefiDecompress is FALSE\r
+ // Don't support UEFI decompression algorithm.\r
//\r
- DEBUG ((DEBUG_ERROR, "Decompress Failed - %r\n", Status));\r
+ ASSERT (FALSE);\r
return EFI_NOT_FOUND;\r
}\r
- break;\r
\r
case EFI_NOT_COMPRESSED:\r
//\r
}\r
\r
\r
-\r
-\r
/**\r
Updates the Stack HOB passed to DXE phase.\r
\r
while ((Hob.Raw = GetNextHob (EFI_HOB_TYPE_MEMORY_ALLOCATION, Hob.Raw)) != NULL) {\r
if (CompareGuid (&gEfiHobMemoryAllocStackGuid, &(Hob.MemoryAllocationStack->AllocDescriptor.Name))) {\r
//\r
- // Build a new memory allocation HOB with old stack info with EfiConventionalMemory type\r
- // to be reclaimed by DXE core.\r
+ // Build a new memory allocation HOB with old stack info with EfiBootServicesData type. Need to \r
+ // avoid this region be reclaimed by DXE core as the IDT built in SEC might be on stack, and some \r
+ // PEIMs may also keep key information on stack\r
//\r
BuildMemoryAllocationHob (\r
Hob.MemoryAllocationStack->AllocDescriptor.MemoryBaseAddress,\r
Hob.MemoryAllocationStack->AllocDescriptor.MemoryLength,\r
- EfiConventionalMemory\r
+ EfiBootServicesData\r
);\r
//\r
// Update the BSP Stack Hob to reflect the new stack info.\r
projects / mirror_edk2.git / blobdiff