-/**@file\r
+/** @file\r
Last PEIM.\r
Responsibility of this module is to load the DXE Core from a Firmware Volume.\r
\r
-Copyright (c) 2006 - 2007 Intel Corporation\r
+Copyright (c) 2006 - 2008, Intel Corporation. <BR>\r
All rights reserved. This program and the accompanying materials\r
are licensed and made available under the terms and conditions of the BSD License\r
which accompanies this distribution. The full text of the license may be found at\r
**/\r
\r
#include "DxeIpl.h"\r
-#include <Ppi/GuidedSectionExtraction.h>\r
-#include <FrameworkPei.h>\r
\r
-EFI_STATUS\r
-CustomGuidedSectionExtract (\r
- IN CONST EFI_PEI_GUIDED_SECTION_EXTRACTION_PPI *This,\r
- IN CONST VOID *InputSection,\r
- OUT VOID **OutputBuffer,\r
- OUT UINTN *OutputSize,\r
- OUT UINT32 *AuthenticationStatus\r
-);\r
-\r
-STATIC\r
-EFI_STATUS\r
-EFIAPI \r
-Decompress (\r
- IN CONST EFI_PEI_DECOMPRESS_PPI *This,\r
- IN CONST EFI_COMPRESSION_SECTION *InputSection,\r
- OUT VOID **OutputBuffer,\r
- OUT UINTN *OutputSize\r
-);\r
-\r
-\r
-BOOLEAN gInMemory = FALSE;\r
\r
//\r
-// Module Globals used in the DXE to PEI handoff\r
+// Module Globals used in the DXE to PEI hand off\r
// These must be module globals, so the stack can be switched\r
//\r
-static EFI_DXE_IPL_PPI mDxeIplPpi = {\r
+CONST EFI_DXE_IPL_PPI mDxeIplPpi = {\r
DxeLoadCore\r
};\r
\r
-STATIC EFI_PEI_GUIDED_SECTION_EXTRACTION_PPI mCustomGuidedSectionExtractionPpi = {\r
+CONST EFI_PEI_GUIDED_SECTION_EXTRACTION_PPI mCustomGuidedSectionExtractionPpi = {\r
CustomGuidedSectionExtract\r
};\r
\r
-STATIC EFI_PEI_DECOMPRESS_PPI mDecompressPpi = {\r
+CONST EFI_PEI_DECOMPRESS_PPI mDecompressPpi = {\r
Decompress\r
};\r
\r
-static EFI_PEI_PPI_DESCRIPTOR mPpiList[] = {\r
+CONST EFI_PEI_PPI_DESCRIPTOR mPpiList[] = {\r
{\r
EFI_PEI_PPI_DESCRIPTOR_PPI,\r
&gEfiDxeIplPpiGuid,\r
- &mDxeIplPpi\r
+ (VOID *) &mDxeIplPpi\r
},\r
{\r
(EFI_PEI_PPI_DESCRIPTOR_PPI | EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST),\r
&gEfiPeiDecompressPpiGuid,\r
- &mDecompressPpi\r
+ (VOID *) &mDecompressPpi\r
}\r
};\r
\r
-static EFI_PEI_PPI_DESCRIPTOR mPpiSignal = {\r
+CONST EFI_PEI_PPI_DESCRIPTOR gEndOfPeiSignalPpi = {\r
(EFI_PEI_PPI_DESCRIPTOR_PPI | EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST),\r
&gEfiEndOfPeiSignalPpiGuid,\r
NULL\r
};\r
\r
/**\r
- Initializes the Dxe Ipl PPI\r
+ Entry point of DXE IPL PEIM.\r
+ \r
+ This function installs DXE IPL PPI and Decompress PPI. It also reloads\r
+ itself to memory on non-S3 resume boot path.\r
+\r
+ @param FileHandle Handle of the file being invoked.\r
+ @param PeiServices Describes the list of possible PEI Services.\r
\r
- @param FfsHandle The handle of FFS file.\r
- @param PeiServices General purpose services available to\r
- every PEIM.\r
- @return EFI_SUCESS \r
-*/ \r
+ @retval EFI_SUCESS The entry point of DXE IPL PEIM executes successfully.\r
+ @retval Others Some error occurs during the execution of this function. \r
+\r
+**/\r
EFI_STATUS\r
EFIAPI\r
PeimInitializeDxeIpl (\r
- IN EFI_PEI_FILE_HANDLE FfsHandle,\r
- IN EFI_PEI_SERVICES **PeiServices\r
+ IN EFI_PEI_FILE_HANDLE FileHandle,\r
+ IN CONST EFI_PEI_SERVICES **PeiServices\r
)\r
{\r
EFI_STATUS Status;\r
UINTN ExtractHandlerNumber;\r
EFI_PEI_PPI_DESCRIPTOR *GuidPpi;\r
\r
- Status = PeiServicesGetBootMode (&BootMode);\r
- ASSERT_EFI_ERROR (Status);\r
+ BootMode = GetBootModeHob ();\r
\r
if (BootMode != BOOT_ON_S3_RESUME) {\r
- Status = PeiServicesRegisterForShadow (FfsHandle);\r
+ Status = PeiServicesRegisterForShadow (FileHandle);\r
if (Status == EFI_SUCCESS) {\r
//\r
- // EFI_SUCESS means the first time call register for shadow \r
+ // EFI_SUCESS means it is the first time to call register for shadow. \r
// \r
return Status;\r
- } else if (Status == EFI_ALREADY_STARTED) {\r
- \r
- gInMemory = TRUE;\r
- \r
- //\r
- // Get custom extract guided section method guid list \r
- //\r
- ExtractHandlerNumber = ExtractGuidedSectionGetGuidList (&ExtractHandlerGuidTable);\r
- \r
- //\r
- // Install custom extraction guid ppi\r
- //\r
- if (ExtractHandlerNumber > 0) {\r
- GuidPpi = NULL;\r
- GuidPpi = (EFI_PEI_PPI_DESCRIPTOR *) AllocatePool (ExtractHandlerNumber * sizeof (EFI_PEI_PPI_DESCRIPTOR));\r
- ASSERT (GuidPpi != NULL);\r
- while (ExtractHandlerNumber-- > 0) {\r
- GuidPpi->Flags = EFI_PEI_PPI_DESCRIPTOR_PPI | EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST;\r
- GuidPpi->Ppi = &mCustomGuidedSectionExtractionPpi;\r
- GuidPpi->Guid = &(ExtractHandlerGuidTable [ExtractHandlerNumber]);\r
- Status = PeiServicesInstallPpi (GuidPpi++);\r
- ASSERT_EFI_ERROR(Status);\r
- }\r
+ }\r
+ \r
+ //\r
+ // Ensure that DXE IPL is shadowed to permanent memory.\r
+ //\r
+ ASSERT (Status == EFI_ALREADY_STARTED);\r
+ \r
+ //\r
+ // Get custom extract guided section method guid list \r
+ //\r
+ ExtractHandlerNumber = ExtractGuidedSectionGetGuidList (&ExtractHandlerGuidTable);\r
+ \r
+ //\r
+ // Install custom extraction guid PPI\r
+ //\r
+ if (ExtractHandlerNumber > 0) {\r
+ GuidPpi = (EFI_PEI_PPI_DESCRIPTOR *) AllocatePool (ExtractHandlerNumber * sizeof (EFI_PEI_PPI_DESCRIPTOR));\r
+ ASSERT (GuidPpi != NULL);\r
+ while (ExtractHandlerNumber-- > 0) {\r
+ GuidPpi->Flags = EFI_PEI_PPI_DESCRIPTOR_PPI | EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST;\r
+ GuidPpi->Ppi = (VOID *) &mCustomGuidedSectionExtractionPpi;\r
+ GuidPpi->Guid = &ExtractHandlerGuidTable[ExtractHandlerNumber];\r
+ Status = PeiServicesInstallPpi (GuidPpi++);\r
+ ASSERT_EFI_ERROR(Status);\r
}\r
- } else {\r
- ASSERT (FALSE);\r
}\r
+ \r
}\r
\r
//\r
}\r
\r
/**\r
- Main entry point to last PEIM \r
+ Main entry point to last PEIM. \r
+\r
+ This function finds DXE Core in the firmware volume and transfer the control to\r
+ DXE core.\r
\r
- @param This Entry point for DXE IPL PPI\r
+ @param This Entry point for DXE IPL PPI.\r
@param PeiServices General purpose services available to every PEIM.\r
- @param HobList Address to the Pei HOB list\r
+ @param HobList Address to the Pei HOB list.\r
\r
@return EFI_SUCCESS DXE core was successfully loaded. \r
@return EFI_OUT_OF_RESOURCES There are not enough resources to load DXE core.\r
+\r
**/\r
EFI_STATUS\r
EFIAPI\r
DxeLoadCore (\r
- IN EFI_DXE_IPL_PPI *This,\r
+ IN CONST EFI_DXE_IPL_PPI *This,\r
IN EFI_PEI_SERVICES **PeiServices,\r
IN EFI_PEI_HOB_POINTERS HobList\r
)\r
{\r
EFI_STATUS Status;\r
- EFI_GUID DxeCoreFileName;\r
+ EFI_FV_FILE_INFO DxeCoreFileInfo;\r
EFI_PHYSICAL_ADDRESS DxeCoreAddress;\r
UINT64 DxeCoreSize;\r
EFI_PHYSICAL_ADDRESS DxeCoreEntryPoint;\r
EFI_PEI_FILE_HANDLE FileHandle;\r
EFI_PEI_READ_ONLY_VARIABLE2_PPI *Variable;\r
UINTN DataSize;\r
- EFI_MEMORY_TYPE_INFORMATION MemoryData [EfiMaxMemoryType + 1];\r
+ EFI_MEMORY_TYPE_INFORMATION MemoryData[EfiMaxMemoryType + 1];\r
\r
//\r
// if in S3 Resume, restore configure\r
//\r
- Status = PeiServicesGetBootMode (&BootMode);\r
- ASSERT_EFI_ERROR(Status);\r
+ BootMode = GetBootModeHob ();\r
\r
if (BootMode == BOOT_ON_S3_RESUME) {\r
Status = AcpiS3ResumeOs();\r
} else if (BootMode == BOOT_IN_RECOVERY_MODE) {\r
Status = PeiRecoverFirmware ();\r
if (EFI_ERROR (Status)) {\r
- DEBUG ((EFI_D_ERROR, "Load Recovery Capsule Failed.(Status = %r)\n", Status));\r
+ DEBUG ((DEBUG_ERROR, "Load Recovery Capsule Failed.(Status = %r)\n", Status));\r
CpuDeadLoop ();\r
}\r
\r
//\r
- // Now should have a HOB with the DXE core w/ the old HOB destroyed\r
+ // Now should have a HOB with the DXE core\r
//\r
}\r
\r
NULL,\r
(VOID **)&Variable\r
);\r
- ASSERT_EFI_ERROR (Status);\r
-\r
- DataSize = sizeof (MemoryData);\r
- Status = Variable->GetVariable ( \r
- Variable, \r
- EFI_MEMORY_TYPE_INFORMATION_VARIABLE_NAME,\r
- &gEfiMemoryTypeInformationGuid,\r
- NULL,\r
- &DataSize,\r
- &MemoryData\r
- );\r
-\r
if (!EFI_ERROR (Status)) {\r
- //\r
- // Build the GUID'd HOB for DXE\r
- //\r
- BuildGuidDataHob (\r
- &gEfiMemoryTypeInformationGuid,\r
- MemoryData,\r
- DataSize\r
- );\r
+ DataSize = sizeof (MemoryData);\r
+ Status = Variable->GetVariable ( \r
+ Variable, \r
+ EFI_MEMORY_TYPE_INFORMATION_VARIABLE_NAME,\r
+ &gEfiMemoryTypeInformationGuid,\r
+ NULL,\r
+ &DataSize,\r
+ &MemoryData\r
+ );\r
+ if (!EFI_ERROR (Status)) {\r
+ //\r
+ // Build the GUID'd HOB for DXE\r
+ //\r
+ BuildGuidDataHob (\r
+ &gEfiMemoryTypeInformationGuid,\r
+ MemoryData,\r
+ DataSize\r
+ );\r
+ }\r
}\r
\r
//\r
- // Look in all the FVs present in PEI and find the DXE Core\r
+ // Look in all the FVs present in PEI and find the DXE Core FileHandle\r
//\r
- FileHandle = NULL;\r
- Status = DxeIplFindDxeCore (&FileHandle);\r
- ASSERT_EFI_ERROR (Status);\r
-\r
- CopyMem(&DxeCoreFileName, &(((EFI_FFS_FILE_HEADER*)FileHandle)->Name), sizeof (EFI_GUID));\r
+ FileHandle = DxeIplFindDxeCore ();\r
\r
//\r
- // Load the DXE Core from a Firmware Volume, may use LoadFile ppi to do this for save code size.\r
+ // Load the DXE Core from a Firmware Volume, may use LoadFile PPI to do this to save code size.\r
//\r
Status = PeiLoadFile (\r
- FileHandle,\r
- &DxeCoreAddress,\r
- &DxeCoreSize,\r
- &DxeCoreEntryPoint\r
- );\r
+ FileHandle,\r
+ &DxeCoreAddress,\r
+ &DxeCoreSize,\r
+ &DxeCoreEntryPoint\r
+ );\r
+ ASSERT_EFI_ERROR (Status);\r
\r
+ //\r
+ // Get the DxeCore File Info from the FileHandle for the DxeCore GUID file name.\r
+ //\r
+ Status = PeiServicesFfsGetFileInfo (FileHandle, &DxeCoreFileInfo);\r
ASSERT_EFI_ERROR (Status);\r
\r
//\r
// Add HOB for the DXE Core\r
//\r
BuildModuleHob (\r
- &DxeCoreFileName,\r
+ &DxeCoreFileInfo.FileName,\r
DxeCoreAddress,\r
- EFI_SIZE_TO_PAGES ((UINT32) DxeCoreSize) * EFI_PAGE_SIZE,\r
+ ALIGN_VALUE (DxeCoreSize, EFI_PAGE_SIZE),\r
DxeCoreEntryPoint\r
);\r
\r
//\r
// Report Status Code EFI_SW_PEI_PC_HANDOFF_TO_NEXT\r
//\r
- REPORT_STATUS_CODE (\r
- EFI_PROGRESS_CODE,\r
- EFI_SOFTWARE_PEI_MODULE | EFI_SW_PEI_CORE_PC_HANDOFF_TO_NEXT\r
- );\r
+ REPORT_STATUS_CODE (EFI_PROGRESS_CODE, PcdGet32 (PcdStatusCodeValuePeiHandoffToDxe));\r
\r
- DEBUG_CODE_BEGIN ();\r
+ DEBUG ((DEBUG_INFO | DEBUG_LOAD, "Loading DXE CORE at 0x%11p EntryPoint=0x%11p\n", (VOID *)(UINTN)DxeCoreAddress, FUNCTION_ENTRY_POINT (DxeCoreEntryPoint)));\r
\r
- EFI_IMAGE_OPTIONAL_HEADER_PTR_UNION PtrPeImage;\r
- PtrPeImage.Pe32 = (EFI_IMAGE_NT_HEADERS32 *) ((UINTN) DxeCoreAddress + ((EFI_IMAGE_DOS_HEADER *) (UINTN) DxeCoreAddress)->e_lfanew);\r
- \r
- if (PtrPeImage.Pe32->FileHeader.Machine != IMAGE_FILE_MACHINE_IA64) {\r
- DEBUG ((EFI_D_INFO | EFI_D_LOAD, "Loading DXE CORE at 0x%10p EntryPoint=0x%10p\n", (VOID *)(UINTN)DxeCoreAddress, (VOID *)(UINTN)DxeCoreEntryPoint));\r
- } else {\r
- //\r
- // For IPF Image, the real entry point should be print.\r
- //\r
- DEBUG ((EFI_D_INFO | EFI_D_LOAD, "Loading DXE CORE at 0x%10p EntryPoint=0x%10p\n", (VOID *)(UINTN)DxeCoreAddress, (VOID *)(UINTN)(*(UINT64 *)(UINTN)DxeCoreEntryPoint)));\r
- }\r
-\r
- DEBUG_CODE_END ();\r
//\r
// Transfer control to the DXE Core\r
- // The handoff state is simply a pointer to the HOB list\r
+ // The hand off state is simply a pointer to the HOB list\r
//\r
- HandOffToDxeCore (DxeCoreEntryPoint, HobList, &mPpiSignal);\r
+ HandOffToDxeCore (DxeCoreEntryPoint, HobList);\r
//\r
// If we get here, then the DXE Core returned. This is an error\r
- // Dxe Core should not return.\r
+ // DxeCore should not return.\r
//\r
ASSERT (FALSE);\r
CpuDeadLoop ();\r
return EFI_OUT_OF_RESOURCES;\r
}\r
\r
+\r
/**\r
- Find DxeCore driver from all First Volumes.\r
+ Searches DxeCore in all firmware Volumes and loads the first\r
+ instance that contains DxeCore.\r
\r
- @param FileHandle Pointer to FFS file to search.\r
+ @return FileHandle of DxeCore to load DxeCore.\r
\r
- @return EFI_SUCESS Success to find the FFS in specificed FV\r
- @return others Fail to find the FFS in specificed FV\r
- */\r
-EFI_STATUS\r
+**/\r
+EFI_PEI_FILE_HANDLE\r
DxeIplFindDxeCore (\r
- OUT EFI_PEI_FILE_HANDLE *FileHandle\r
+ VOID\r
)\r
{\r
- EFI_STATUS Status;\r
- EFI_STATUS FileStatus;\r
- UINTN Instance;\r
- EFI_PEI_FV_HANDLE VolumeHandle;\r
+ EFI_STATUS Status;\r
+ UINTN Instance;\r
+ EFI_PEI_FV_HANDLE VolumeHandle;\r
+ EFI_PEI_FILE_HANDLE FileHandle;\r
\r
Instance = 0;\r
- *FileHandle = NULL;\r
-\r
- do {\r
- Status = PeiServicesFfsFindNextVolume (Instance++, &VolumeHandle);\r
+ while (TRUE) {\r
+ //\r
+ // Traverse all firmware volume instances\r
+ //\r
+ Status = PeiServicesFfsFindNextVolume (Instance, &VolumeHandle);\r
+ //\r
+ // If some error occurs here, then we cannot find any firmware\r
+ // volume that may contain DxeCore.\r
+ //\r
+ ASSERT_EFI_ERROR (Status);\r
+ \r
+ //\r
+ // Find the DxeCore file type from the beginning in this firmware volume.\r
+ //\r
+ FileHandle = NULL;\r
+ Status = PeiServicesFfsFindNextFile (EFI_FV_FILETYPE_DXE_CORE, VolumeHandle, &FileHandle);\r
if (!EFI_ERROR (Status)) {\r
- FileStatus = PeiServicesFfsFindNextFile (EFI_FV_FILETYPE_DXE_CORE, VolumeHandle, FileHandle);\r
- if (!EFI_ERROR (FileStatus)) {\r
- return FileStatus;\r
- }\r
+ //\r
+ // Find DxeCore FileHandle in this volume, then we skip other firmware volume and\r
+ // return the FileHandle.\r
+ //\r
+ return FileHandle;\r
}\r
- } while (!EFI_ERROR (Status));\r
-\r
- return EFI_NOT_FOUND;\r
+ //\r
+ // We cannot find DxeCore in this firmware volume, then search the next volume.\r
+ //\r
+ Instance++;\r
+ }\r
}\r
\r
+\r
/**\r
Loads and relocates a PE/COFF image into memory.\r
\r
\r
@return EFI_SUCCESS The file was loaded and relocated\r
@return EFI_OUT_OF_RESOURCES There was not enough memory to load and relocate the PE/COFF file\r
+\r
**/\r
EFI_STATUS\r
PeiLoadFile (\r
EFI_STATUS Status;\r
PE_COFF_LOADER_IMAGE_CONTEXT ImageContext;\r
VOID *Pe32Data;\r
+\r
//\r
// First try to find the PE32 section in this ffs file.\r
//\r
FileHandle,\r
&Pe32Data\r
);\r
- \r
if (EFI_ERROR (Status)) {\r
//\r
// NO image types we support so exit.\r
\r
ZeroMem (&ImageContext, sizeof (ImageContext));\r
ImageContext.Handle = Pe32Data;\r
- Status = GetImageReadFunction (&ImageContext);\r
+ ImageContext.ImageRead = PeiImageRead;\r
\r
- ASSERT_EFI_ERROR (Status);\r
\r
Status = PeCoffLoaderGetImageInfo (&ImageContext);\r
if (EFI_ERROR (Status)) {\r
//\r
// Allocate Memory for the image\r
//\r
- ImageContext.ImageAddress = (EFI_PHYSICAL_ADDRESS)(UINTN) AllocatePages (EFI_SIZE_TO_PAGES ((UINT32) ImageContext.ImageSize));\r
+ Status = PeiServicesAllocatePages (\r
+ EfiBootServicesCode, \r
+ EFI_SIZE_TO_PAGES ((UINT32) ImageContext.ImageSize), \r
+ &ImageContext.ImageAddress\r
+ );\r
+ ASSERT_EFI_ERROR (Status);\r
ASSERT (ImageContext.ImageAddress != 0);\r
\r
//\r
}\r
\r
//\r
- // Flush the instruction cache so the image data is written before we execute it\r
+ // Flush the instruction cache so the image data are written before we execute it\r
//\r
- InvalidateInstructionCacheRange ((VOID *)(UINTN)ImageContext.ImageAddress, (UINTN)ImageContext.ImageSize);\r
+ InvalidateInstructionCacheRange ((VOID *)(UINTN) ImageContext.ImageAddress, (UINTN) ImageContext.ImageSize);\r
\r
*ImageAddress = ImageContext.ImageAddress;\r
*ImageSize = ImageContext.ImageSize;\r
return EFI_SUCCESS;\r
}\r
\r
+\r
+\r
+\r
/**\r
The ExtractSection() function processes the input section and\r
returns a pointer to the section contents. If the section being\r
processed. OutputBuffer OutputBuffer is\r
allocated from PEI permanent memory and contains\r
the new section stream.\r
- \r
+ @param InputSection A pointer to the input buffer, which contains\r
+ the input section to be processed.\r
+ @param OutputBuffer A pointer to a caller-allocated buffer, whose\r
+ size is specified by the contents of OutputSize.\r
@param OutputSize A pointer to a caller-allocated\r
UINTN in which the size of *OutputBuffer\r
allocation is stored. If the function\r
returns anything other than EFI_SUCCESS,\r
the value of OutputSize is undefined.\r
- \r
@param AuthenticationStatus A pointer to a caller-allocated\r
UINT32 that indicates the\r
authentication status of the\r
@retval EFI_OUT_OF_RESOURCES The system has insufficient\r
resources to process the request.\r
\r
- @reteval EFI_INVALID_PARAMETER The GUID in InputSection does\r
+ @retval EFI_INVALID_PARAMETER The GUID in InputSection does\r
not match this instance of the\r
GUIDed Section Extraction PPI.\r
+\r
**/\r
EFI_STATUS\r
CustomGuidedSectionExtract (\r
// Call GetInfo to get the size and attribute of input guided section data.\r
//\r
Status = ExtractGuidedSectionGetInfo (\r
- InputSection,\r
- &OutputBufferSize,\r
- &ScratchBufferSize,\r
- &SectionAttribute\r
- );\r
+ InputSection,\r
+ &OutputBufferSize,\r
+ &ScratchBufferSize,\r
+ &SectionAttribute\r
+ );\r
\r
if (EFI_ERROR (Status)) {\r
- DEBUG ((EFI_D_ERROR, "GetInfo from guided section Failed - %r\n", Status));\r
+ DEBUG ((DEBUG_ERROR, "GetInfo from guided section Failed - %r\n", Status));\r
return Status;\r
}\r
\r
}\r
}\r
\r
- if ((SectionAttribute & EFI_GUIDED_SECTION_PROCESSING_REQUIRED) && OutputBufferSize > 0) { \r
+ if (((SectionAttribute & EFI_GUIDED_SECTION_PROCESSING_REQUIRED) != 0) && OutputBufferSize > 0) { \r
//\r
// Allocate output buffer\r
//\r
if (*OutputBuffer == NULL) {\r
return EFI_OUT_OF_RESOURCES;\r
}\r
- DEBUG ((EFI_D_INFO, "Customed Guided section Memory Size required is 0x%x and address is 0x%p\n", OutputBufferSize, *OutputBuffer));\r
+ DEBUG ((DEBUG_INFO, "Customized Guided section Memory Size required is 0x%x and address is 0x%p\n", OutputBufferSize, *OutputBuffer));\r
//\r
// *OutputBuffer still is one section. Adjust *OutputBuffer offset, \r
// skip EFI section header to make section data at page alignment.\r
OutputBuffer,\r
ScratchBuffer,\r
AuthenticationStatus\r
- );\r
-\r
+ );\r
if (EFI_ERROR (Status)) {\r
//\r
// Decode failed\r
//\r
- DEBUG ((EFI_D_ERROR, "Extract guided section Failed - %r\n", Status));\r
+ DEBUG ((DEBUG_ERROR, "Extract guided section Failed - %r\n", Status));\r
return Status;\r
}\r
\r
return EFI_SUCCESS;\r
}\r
\r
-STATIC\r
+\r
+\r
+/**\r
+ Decompresses a section to the output buffer.\r
+\r
+ This function looks up the compression type field in the input section and\r
+ applies the appropriate compression algorithm to compress the section to a\r
+ callee allocated buffer.\r
+ \r
+ @param This Points to this instance of the\r
+ EFI_PEI_DECOMPRESS_PEI PPI.\r
+ @param CompressionSection Points to the compressed section.\r
+ @param OutputBuffer Holds the returned pointer to the decompressed\r
+ sections.\r
+ @param OutputSize Holds the returned size of the decompress\r
+ section streams.\r
+ \r
+ @retval EFI_SUCCESS The section was decompressed successfully.\r
+ OutputBuffer contains the resulting data and\r
+ OutputSize contains the resulting size.\r
+\r
+**/\r
EFI_STATUS\r
EFIAPI \r
Decompress (\r
}\r
\r
Section = (EFI_COMMON_SECTION_HEADER *) CompressionSection;\r
- SectionLength = *(UINT32 *) (Section->Size) & 0x00ffffff;\r
+ SectionLength = *(UINT32 *) (Section->Size) & 0x00ffffff;\r
\r
//\r
// This is a compression set, expand it\r
case EFI_STANDARD_COMPRESSION:\r
//\r
// Load EFI standard compression.\r
- // For compressed data, decompress them to dstbuffer.\r
+ // For compressed data, decompress them to destination buffer.\r
//\r
Status = UefiDecompressGetInfo (\r
(UINT8 *) ((EFI_COMPRESSION_SECTION *) Section + 1),\r
//\r
// GetInfo failed\r
//\r
- DEBUG ((EFI_D_ERROR, "Decompress GetInfo Failed - %r\n", Status));\r
+ DEBUG ((DEBUG_ERROR, "Decompress GetInfo Failed - %r\n", Status));\r
return EFI_NOT_FOUND;\r
}\r
//\r
//\r
// Decompress failed\r
//\r
- DEBUG ((EFI_D_ERROR, "Decompress Failed - %r\n", Status));\r
+ DEBUG ((DEBUG_ERROR, "Decompress Failed - %r\n", Status));\r
return EFI_NOT_FOUND;\r
}\r
break;\r
return EFI_SUCCESS;\r
}\r
\r
+\r
+/**\r
+ Updates the Stack HOB passed to DXE phase.\r
+\r
+ This function traverses the whole HOB list and update the stack HOB to\r
+ reflect the real stack that is used by DXE core.\r
+\r
+ @param BaseAddress The lower address of stack used by DxeCore.\r
+ @param Length The length of stack used by DxeCore.\r
+\r
+**/\r
VOID\r
UpdateStackHob (\r
IN EFI_PHYSICAL_ADDRESS BaseAddress,\r