/** @file\r
- This library provides basic function for UEFI network stack.\r
+ This library is only intended to be used by UEFI network stack modules.\r
+ It provides basic functions for the UEFI network stack.\r
\r
-Copyright (c) 2005 - 2008, Intel Corporation\r
-All rights reserved. This program and the accompanying materials\r
+Copyright (c) 2005 - 2012, Intel Corporation. All rights reserved.<BR>\r
+This program and the accompanying materials\r
are licensed and made available under the terms and conditions of the BSD License\r
-which accompanies this distribution. The full text of the license may be found at\r
+which accompanies this distribution. The full text of the license may be found at<BR>\r
http://opensource.org/licenses/bsd-license.php\r
\r
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
#ifndef _NET_LIB_H_\r
#define _NET_LIB_H_\r
\r
+#include <Protocol/Ip6.h>\r
+\r
+#include <Library/BaseLib.h>\r
#include <Library/BaseMemoryLib.h>\r
-#include <Library/MemoryAllocationLib.h>\r
-#include <Protocol/DriverBinding.h>\r
-#include <Protocol/ComponentName.h>\r
-#include <Protocol/DriverConfiguration.h>\r
-#include <Protocol/DriverDiagnostics.h>\r
-#include <Protocol/Dpc.h>\r
\r
typedef UINT32 IP4_ADDR;\r
typedef UINT32 TCP_SEQNO;\r
typedef UINT16 TCP_PORTNO;\r
\r
-typedef enum {\r
- NET_ETHER_ADDR_LEN = 6,\r
- NET_IFTYPE_ETHERNET = 0x01,\r
\r
- EFI_IP_PROTO_UDP = 0x11,\r
- EFI_IP_PROTO_TCP = 0x06,\r
- EFI_IP_PROTO_ICMP = 0x01,\r
+#define NET_ETHER_ADDR_LEN 6\r
+#define NET_IFTYPE_ETHERNET 0x01\r
+\r
+#define NET_VLAN_TAG_LEN 4\r
+#define ETHER_TYPE_VLAN 0x8100\r
+\r
+#define EFI_IP_PROTO_UDP 0x11\r
+#define EFI_IP_PROTO_TCP 0x06\r
+#define EFI_IP_PROTO_ICMP 0x01\r
+#define IP4_PROTO_IGMP 0x02\r
+#define IP6_ICMP 58\r
+\r
+//\r
+// The address classification\r
+//\r
+#define IP4_ADDR_CLASSA 1\r
+#define IP4_ADDR_CLASSB 2\r
+#define IP4_ADDR_CLASSC 3\r
+#define IP4_ADDR_CLASSD 4\r
+#define IP4_ADDR_CLASSE 5\r
\r
- //\r
- // The address classfication\r
- //\r
- IP4_ADDR_CLASSA = 1,\r
- IP4_ADDR_CLASSB,\r
- IP4_ADDR_CLASSC,\r
- IP4_ADDR_CLASSD,\r
- IP4_ADDR_CLASSE,\r
+#define IP4_MASK_NUM 33\r
+#define IP6_PREFIX_NUM 129\r
\r
- IP4_MASK_NUM = 33\r
-} IP4_CLASS_TYPE;\r
+#define IP6_HOP_BY_HOP 0\r
+#define IP6_DESTINATION 60\r
+#define IP6_ROUTING 43\r
+#define IP6_FRAGMENT 44\r
+#define IP6_AH 51\r
+#define IP6_ESP 50\r
+#define IP6_NO_NEXT_HEADER 59\r
+\r
+#define IP_VERSION_4 4\r
+#define IP_VERSION_6 6\r
+\r
+#define IP6_PREFIX_LENGTH 64\r
\r
#pragma pack(1)\r
\r
UINT16 EtherType;\r
} ETHER_HEAD;\r
\r
+//\r
+// 802.1Q VLAN Tag Control Information\r
+//\r
+typedef union {\r
+ struct {\r
+ UINT16 Vid : 12; // Unique VLAN identifier (0 to 4094)\r
+ UINT16 Cfi : 1; // Canonical Format Indicator\r
+ UINT16 Priority : 3; // 802.1Q priority level (0 to 7)\r
+ } Bits;\r
+ UINT16 Uint16;\r
+} VLAN_TCI;\r
+\r
+#define VLAN_TCI_CFI_CANONICAL_MAC 0\r
+#define VLAN_TCI_CFI_NON_CANONICAL_MAC 1\r
\r
//\r
// The EFI_IP4_HEADER is hard to use because the source and\r
\r
\r
//\r
-// ICMP head definition. ICMP message is categoried as either an error\r
+// ICMP head definition. Each ICMP message is categorized as either an error\r
// message or query message. Two message types have their own head format.\r
//\r
typedef struct {\r
UINT16 Seq;\r
} IP4_ICMP_QUERY_HEAD;\r
\r
+typedef struct {\r
+ UINT8 Type;\r
+ UINT8 Code;\r
+ UINT16 Checksum;\r
+} IP6_ICMP_HEAD;\r
+\r
+typedef struct {\r
+ IP6_ICMP_HEAD Head;\r
+ UINT32 Fourth;\r
+ EFI_IP6_HEADER IpHead;\r
+} IP6_ICMP_ERROR_HEAD;\r
+\r
+typedef struct {\r
+ IP6_ICMP_HEAD Head;\r
+ UINT32 Fourth;\r
+} IP6_ICMP_INFORMATION_HEAD;\r
\r
//\r
// UDP header definition\r
UINT16 DstPort;\r
UINT16 Length;\r
UINT16 Checksum;\r
-} EFI_UDP4_HEADER;\r
-\r
+} EFI_UDP_HEADER;\r
\r
//\r
// TCP header definition\r
#define NET_MAC_IS_MULTICAST(Mac, BMac, Len) \\r
(((*((UINT8 *) Mac) & 0x01) == 0x01) && (!NET_MAC_EQUAL (Mac, BMac, Len)))\r
\r
-#define NTOHL(x) (UINT32)((((UINT32) (x) & 0xff) << 24) | \\r
- (((UINT32) (x) & 0xff00) << 8) | \\r
- (((UINT32) (x) & 0xff0000) >> 8) | \\r
- (((UINT32) (x) & 0xff000000) >> 24))\r
+#define NTOHL(x) SwapBytes32 (x)\r
\r
#define HTONL(x) NTOHL(x)\r
\r
-#define NTOHS(x) (UINT16)((((UINT16) (x) & 0xff) << 8) | \\r
- (((UINT16) (x) & 0xff00) >> 8))\r
+#define NTOHS(x) SwapBytes16 (x)\r
\r
-#define HTONS(x) NTOHS(x)\r
+#define HTONS(x) NTOHS(x)\r
+#define NTOHLL(x) SwapBytes64 (x)\r
+#define HTONLL(x) NTOHLL(x)\r
+#define NTOHLLL(x) Ip6Swap128 (x)\r
+#define HTONLLL(x) NTOHLLL(x)\r
\r
//\r
// Test the IP's attribute, All the IPs are in host byte order.\r
#define IP4_NET_EQUAL(Ip1, Ip2, NetMask) (((Ip1) & (NetMask)) == ((Ip2) & (NetMask)))\r
#define IP4_IS_VALID_NETMASK(Ip) (NetGetMaskLength (Ip) != IP4_MASK_NUM)\r
\r
+#define IP6_IS_MULTICAST(Ip6) (((Ip6)->Addr[0]) == 0xFF)\r
+\r
//\r
// Convert the EFI_IP4_ADDRESS to plain UINT32 IP4 address.\r
//\r
#define EFI_NTOHL(EfiIp) (NTOHL (EFI_IP4 ((EfiIp))))\r
#define EFI_IP4_EQUAL(Ip1, Ip2) (CompareMem ((Ip1), (Ip2), sizeof (EFI_IPv4_ADDRESS)) == 0)\r
\r
+#define EFI_IP6_EQUAL(Ip1, Ip2) (CompareMem ((Ip1), (Ip2), sizeof (EFI_IPv6_ADDRESS)) == 0)\r
+\r
+#define IP4_COPY_ADDRESS(Dest, Src) (CopyMem ((Dest), (Src), sizeof (EFI_IPv4_ADDRESS)))\r
+#define IP6_COPY_ADDRESS(Dest, Src) (CopyMem ((Dest), (Src), sizeof (EFI_IPv6_ADDRESS)))\r
+#define IP6_COPY_LINK_ADDRESS(Mac1, Mac2) (CopyMem ((Mac1), (Mac2), sizeof (EFI_MAC_ADDRESS)))\r
+\r
+//\r
+// The debug level definition. This value is also used as the\r
+// syslog's servity level. Don't change it.\r
+//\r
+#define NETDEBUG_LEVEL_TRACE 5\r
+#define NETDEBUG_LEVEL_WARNING 4\r
+#define NETDEBUG_LEVEL_ERROR 3\r
+\r
+//\r
+// Network debug message is sent out as syslog packet.\r
+//\r
+#define NET_SYSLOG_FACILITY 16 // Syslog local facility local use\r
+#define NET_SYSLOG_PACKET_LEN 512\r
+#define NET_SYSLOG_TX_TIMEOUT (500 * 1000 * 10) // 500ms\r
+#define NET_DEBUG_MSG_LEN 470 // 512 - (ether+ip4+udp4 head length)\r
+\r
+//\r
+// The debug output expects the ASCII format string, Use %a to print ASCII\r
+// string, and %s to print UNICODE string. PrintArg must be enclosed in ().\r
+// For example: NET_DEBUG_TRACE ("Tcp", ("State transit to %a\n", Name));\r
+//\r
+#define NET_DEBUG_TRACE(Module, PrintArg) \\r
+ NetDebugOutput ( \\r
+ NETDEBUG_LEVEL_TRACE, \\r
+ Module, \\r
+ __FILE__, \\r
+ __LINE__, \\r
+ NetDebugASPrint PrintArg \\r
+ )\r
+\r
+#define NET_DEBUG_WARNING(Module, PrintArg) \\r
+ NetDebugOutput ( \\r
+ NETDEBUG_LEVEL_WARNING, \\r
+ Module, \\r
+ __FILE__, \\r
+ __LINE__, \\r
+ NetDebugASPrint PrintArg \\r
+ )\r
+\r
+#define NET_DEBUG_ERROR(Module, PrintArg) \\r
+ NetDebugOutput ( \\r
+ NETDEBUG_LEVEL_ERROR, \\r
+ Module, \\r
+ __FILE__, \\r
+ __LINE__, \\r
+ NetDebugASPrint PrintArg \\r
+ )\r
+\r
+/**\r
+ Allocate a buffer, then format the message to it. This is a\r
+ help function for the NET_DEBUG_XXX macros. The PrintArg of\r
+ these macros treats the variable length print parameters as a\r
+ single parameter, and pass it to the NetDebugASPrint. For\r
+ example, NET_DEBUG_TRACE ("Tcp", ("State transit to %a\n", Name))\r
+ if extracted to:\r
+\r
+ NetDebugOutput (\r
+ NETDEBUG_LEVEL_TRACE,\r
+ "Tcp",\r
+ __FILE__,\r
+ __LINE__,\r
+ NetDebugASPrint ("State transit to %a\n", Name)\r
+ )\r
+\r
+ @param Format The ASCII format string.\r
+ @param ... The variable length parameter whose format is determined\r
+ by the Format string.\r
+\r
+ @return The buffer containing the formatted message,\r
+ or NULL if memory allocation failed.\r
+\r
+**/\r
+CHAR8 *\r
+EFIAPI\r
+NetDebugASPrint (\r
+ IN CHAR8 *Format,\r
+ ...\r
+ );\r
+\r
+/**\r
+ Builds an UDP4 syslog packet and send it using SNP.\r
+\r
+ This function will locate a instance of SNP then send the message through it.\r
+ Because it isn't open the SNP BY_DRIVER, apply caution when using it.\r
+\r
+ @param Level The servity level of the message.\r
+ @param Module The Moudle that generates the log.\r
+ @param File The file that contains the log.\r
+ @param Line The exact line that contains the log.\r
+ @param Message The user message to log.\r
+\r
+ @retval EFI_INVALID_PARAMETER Any input parameter is invalid.\r
+ @retval EFI_OUT_OF_RESOURCES Failed to allocate memory for the packet\r
+ @retval EFI_SUCCESS The log is discard because that it is more verbose\r
+ than the mNetDebugLevelMax. Or, it has been sent out.\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+NetDebugOutput (\r
+ IN UINT32 Level,\r
+ IN UINT8 *Module,\r
+ IN UINT8 *File,\r
+ IN UINT32 Line,\r
+ IN UINT8 *Message\r
+ );\r
+\r
+\r
/**\r
- Return the length of the mask. If the mask is invalid,\r
- return the invalid length 33, which is IP4_MASK_NUM.\r
+ Return the length of the mask.\r
+\r
+ Return the length of the mask. Valid values are 0 to 32.\r
+ If the mask is invalid, return the invalid length 33, which is IP4_MASK_NUM.\r
NetMask is in the host byte order.\r
\r
- @param NetMask The netmask to get the length from\r
+ @param[in] NetMask The netmask to get the length from.\r
\r
- @return The length of the netmask, IP4_MASK_NUM if the mask isn't\r
- @return supported.\r
+ @return The length of the netmask, or IP4_MASK_NUM (33) if the mask is invalid.\r
\r
**/\r
INTN\r
EFIAPI\r
NetGetMaskLength (\r
- IN IP4_ADDR Mask\r
+ IN IP4_ADDR NetMask\r
);\r
\r
/**\r
- Return the class of the address, such as class a, b, c.\r
+ Return the class of the IP address, such as class A, B, C.\r
Addr is in host byte order.\r
\r
- @param Addr The address to get the class from\r
+ The address of class A starts with 0.\r
+ If the address belong to class A, return IP4_ADDR_CLASSA.\r
+ The address of class B starts with 10.\r
+ If the address belong to class B, return IP4_ADDR_CLASSB.\r
+ The address of class C starts with 110.\r
+ If the address belong to class C, return IP4_ADDR_CLASSC.\r
+ The address of class D starts with 1110.\r
+ If the address belong to class D, return IP4_ADDR_CLASSD.\r
+ The address of class E starts with 1111.\r
+ If the address belong to class E, return IP4_ADDR_CLASSE.\r
+\r
+\r
+ @param[in] Addr The address to get the class from.\r
\r
- @return IP address class, such as IP4_ADDR_CLASSA\r
+ @return IP address class, such as IP4_ADDR_CLASSA.\r
\r
**/\r
INTN\r
\r
/**\r
Check whether the IP is a valid unicast address according to\r
- the netmask. If NetMask is zero, use the IP address's class to\r
- get the default mask.\r
+ the netmask. If NetMask is zero, use the IP address's class to get the default mask.\r
\r
- @param Ip The IP to check againist\r
- @param NetMask The mask of the IP\r
+ If Ip is 0, IP is not a valid unicast address.\r
+ Class D address is used for multicasting and class E address is reserved for future. If Ip\r
+ belongs to class D or class E, Ip is not a valid unicast address.\r
+ If all bits of the host address of Ip are 0 or 1, Ip is not a valid unicast address.\r
\r
- @return TRUE if IP is a valid unicast address on the network, otherwise FALSE\r
+ @param[in] Ip The IP to check against.\r
+ @param[in] NetMask The mask of the IP.\r
+\r
+ @return TRUE if Ip is a valid unicast address on the network, otherwise FALSE.\r
\r
**/\r
BOOLEAN\r
-Ip4IsUnicast (\r
+EFIAPI\r
+NetIp4IsUnicast (\r
IN IP4_ADDR Ip,\r
IN IP4_ADDR NetMask\r
);\r
\r
-extern IP4_ADDR gIp4AllMasks [IP4_MASK_NUM];\r
+/**\r
+ Check whether the incoming IPv6 address is a valid unicast address.\r
+\r
+ If the address is a multicast address has binary 0xFF at the start, it is not\r
+ a valid unicast address. If the address is unspecified ::, it is not a valid\r
+ unicast address to be assigned to any node. If the address is loopback address\r
+ ::1, it is also not a valid unicast address to be assigned to any physical\r
+ interface.\r
+\r
+ @param[in] Ip6 The IPv6 address to check against.\r
+\r
+ @return TRUE if Ip6 is a valid unicast address on the network, otherwise FALSE.\r
+\r
+**/\r
+BOOLEAN\r
+EFIAPI\r
+NetIp6IsValidUnicast (\r
+ IN EFI_IPv6_ADDRESS *Ip6\r
+ );\r
+\r
+\r
+/**\r
+ Check whether the incoming Ipv6 address is the unspecified address or not.\r
+\r
+ @param[in] Ip6 - Ip6 address, in network order.\r
+\r
+ @retval TRUE - Yes, incoming Ipv6 address is the unspecified address.\r
+ @retval FALSE - The incoming Ipv6 address is not the unspecified address\r
+\r
+**/\r
+BOOLEAN\r
+EFIAPI\r
+NetIp6IsUnspecifiedAddr (\r
+ IN EFI_IPv6_ADDRESS *Ip6\r
+ );\r
+\r
+/**\r
+ Check whether the incoming Ipv6 address is a link-local address.\r
+\r
+ @param[in] Ip6 - Ip6 address, in network order.\r
+\r
+ @retval TRUE - The incoming Ipv6 address is a link-local address.\r
+ @retval FALSE - The incoming Ipv6 address is not a link-local address.\r
+\r
+**/\r
+BOOLEAN\r
+EFIAPI\r
+NetIp6IsLinkLocalAddr (\r
+ IN EFI_IPv6_ADDRESS *Ip6\r
+ );\r
+\r
+/**\r
+ Check whether the Ipv6 address1 and address2 are on the connected network.\r
+\r
+ @param[in] Ip1 - Ip6 address1, in network order.\r
+ @param[in] Ip2 - Ip6 address2, in network order.\r
+ @param[in] PrefixLength - The prefix length of the checking net.\r
+\r
+ @retval TRUE - Yes, the Ipv6 address1 and address2 are connected.\r
+ @retval FALSE - No the Ipv6 address1 and address2 are not connected.\r
+\r
+**/\r
+BOOLEAN\r
+EFIAPI\r
+NetIp6IsNetEqual (\r
+ EFI_IPv6_ADDRESS *Ip1,\r
+ EFI_IPv6_ADDRESS *Ip2,\r
+ UINT8 PrefixLength\r
+ );\r
+\r
+/**\r
+ Switches the endianess of an IPv6 address.\r
+\r
+ This function swaps the bytes in a 128-bit IPv6 address to switch the value\r
+ from little endian to big endian or vice versa. The byte swapped value is\r
+ returned.\r
+\r
+ @param Ip6 Points to an IPv6 address.\r
+\r
+ @return The byte swapped IPv6 address.\r
+\r
+**/\r
+EFI_IPv6_ADDRESS *\r
+EFIAPI\r
+Ip6Swap128 (\r
+ EFI_IPv6_ADDRESS *Ip6\r
+ );\r
+\r
+extern IP4_ADDR gIp4AllMasks[IP4_MASK_NUM];\r
\r
\r
extern EFI_IPv4_ADDRESS mZeroIp4Addr;\r
#define NET_RANDOM(Seed) ((UINT32) ((UINT32) (Seed) * 1103515245UL + 12345) % 4294967295UL)\r
\r
/**\r
- Extract a UINT32 from a byte stream, then convert it to host\r
- byte order. Use this function to avoid alignment error.\r
+ Extract a UINT32 from a byte stream.\r
\r
- @param Buf The buffer to extract the UINT32.\r
+ This function copies a UINT32 from a byte stream, and then converts it from Network\r
+ byte order to host byte order. Use this function to avoid alignment error.\r
+\r
+ @param[in] Buf The buffer to extract the UINT32.\r
\r
@return The UINT32 extracted.\r
\r
);\r
\r
/**\r
- Put a UINT32 to the byte stream. Convert it from host byte order\r
- to network byte order before putting.\r
+ Puts a UINT32 into the byte stream in network byte order.\r
\r
- @param Buf The buffer to put the UINT32\r
- @param Data The data to put\r
+ Converts a UINT32 from host byte order to network byte order, then copies it to the\r
+ byte stream.\r
\r
- @return None\r
+ @param[in, out] Buf The buffer in which to put the UINT32.\r
+ @param[in] Data The data to be converted and put into the byte stream.\r
\r
**/\r
VOID\r
EFIAPI\r
NetPutUint32 (\r
- IN UINT8 *Buf,\r
- IN UINT32 Data\r
+ IN OUT UINT8 *Buf,\r
+ IN UINT32 Data\r
);\r
\r
/**\r
Initialize a random seed using current time.\r
\r
- None\r
+ Get current time first. Then initialize a random seed based on some basic\r
+ mathematical operations on the hour, day, minute, second, nanosecond and year\r
+ of the current time.\r
\r
- @return The random seed initialized with current time.\r
+ @return The random seed, initialized with current time.\r
\r
**/\r
UINT32\r
CR(Entry, Type, Field, Sig)\r
\r
//\r
-// Iterate through the doule linked list. It is NOT delete safe\r
+// Iterate through the double linked list. It is NOT delete safe\r
//\r
#define NET_LIST_FOR_EACH(Entry, ListHead) \\r
for(Entry = (ListHead)->ForwardLink; Entry != (ListHead); Entry = Entry->ForwardLink)\r
\r
//\r
-// Iterate through the doule linked list. This is delete-safe.\r
+// Iterate through the double linked list. This is delete-safe.\r
// Don't touch NextEntry. Also, don't use this macro if list\r
// entries other than the Entry may be deleted when processing\r
// the current Entry.\r
)\r
\r
//\r
-// Make sure the list isn't empty before get the frist/last record.\r
+// Make sure the list isn't empty before getting the first/last record.\r
//\r
#define NET_LIST_HEAD(ListHead, Type, Field) \\r
NET_LIST_USER_STRUCT((ListHead)->ForwardLink, Type, Field)\r
\r
\r
/**\r
- Remove the first entry on the list\r
+ Remove the first node entry on the list, and return the removed node entry.\r
+\r
+ Removes the first node entry from a doubly linked list. It is up to the caller of\r
+ this function to release the memory used by the first node, if that is required. On\r
+ exit, the removed node is returned.\r
+\r
+ If Head is NULL, then ASSERT().\r
+ If Head was not initialized, then ASSERT().\r
+ If PcdMaximumLinkedListLength is not zero, and the number of nodes in the\r
+ linked list including the head node is greater than or equal to PcdMaximumLinkedListLength,\r
+ then ASSERT().\r
\r
- @param Head The list header\r
+ @param[in, out] Head The list header.\r
\r
- @return The entry that is removed from the list, NULL if the list is empty.\r
+ @return The first node entry that is removed from the list, NULL if the list is empty.\r
\r
**/\r
LIST_ENTRY *\r
EFIAPI\r
NetListRemoveHead (\r
- LIST_ENTRY *Head\r
+ IN OUT LIST_ENTRY *Head\r
);\r
\r
/**\r
- Remove the last entry on the list\r
+ Remove the last node entry on the list and return the removed node entry.\r
+\r
+ Removes the last node entry from a doubly linked list. It is up to the caller of\r
+ this function to release the memory used by the first node, if that is required. On\r
+ exit, the removed node is returned.\r
+\r
+ If Head is NULL, then ASSERT().\r
+ If Head was not initialized, then ASSERT().\r
+ If PcdMaximumLinkedListLength is not zero, and the number of nodes in the\r
+ linked list including the head node is greater than or equal to PcdMaximumLinkedListLength,\r
+ then ASSERT().\r
\r
- @param Head The list head\r
+ @param[in, out] Head The list head.\r
\r
- @return The entry that is removed from the list, NULL if the list is empty.\r
+ @return The last node entry that is removed from the list, NULL if the list is empty.\r
\r
**/\r
LIST_ENTRY *\r
EFIAPI\r
NetListRemoveTail (\r
- LIST_ENTRY *Head\r
+ IN OUT LIST_ENTRY *Head\r
);\r
\r
/**\r
- Insert the NewEntry after the PrevEntry.\r
+ Insert a new node entry after a designated node entry of a doubly linked list.\r
\r
- @param PrevEntry The previous entry to insert after\r
- @param NewEntry The new entry to insert\r
+ Inserts a new node entry designated by NewEntry after the node entry designated by PrevEntry\r
+ of the doubly linked list.\r
\r
- @return None\r
+ @param[in, out] PrevEntry The entry after which to insert.\r
+ @param[in, out] NewEntry The new entry to insert.\r
\r
**/\r
VOID\r
EFIAPI\r
NetListInsertAfter (\r
- IN LIST_ENTRY *PrevEntry,\r
- IN LIST_ENTRY *NewEntry\r
+ IN OUT LIST_ENTRY *PrevEntry,\r
+ IN OUT LIST_ENTRY *NewEntry\r
);\r
\r
/**\r
- Insert the NewEntry before the PostEntry.\r
+ Insert a new node entry before a designated node entry of a doubly linked list.\r
\r
- @param PostEntry The entry to insert before\r
- @param NewEntry The new entry to insert\r
+ Inserts a new node entry designated by NewEntry before the node entry designated by PostEntry\r
+ of the doubly linked list.\r
\r
- @return None\r
+ @param[in, out] PostEntry The entry to insert before.\r
+ @param[in, out] NewEntry The new entry to insert.\r
\r
**/\r
VOID\r
EFIAPI\r
NetListInsertBefore (\r
- IN LIST_ENTRY *PostEntry,\r
- IN LIST_ENTRY *NewEntry\r
+ IN OUT LIST_ENTRY *PostEntry,\r
+ IN OUT LIST_ENTRY *NewEntry\r
);\r
\r
+/**\r
+ Callback function which provided by user to remove one node in NetDestroyLinkList process.\r
+ \r
+ @param[in] Entry The entry to be removed.\r
+ @param[in] Context Pointer to the callback context corresponds to the Context in NetDestroyLinkList.\r
+\r
+ @retval EFI_SUCCESS The entry has been removed successfully.\r
+ @retval Others Fail to remove the entry.\r
+\r
+**/\r
+typedef\r
+EFI_STATUS\r
+(EFIAPI *NET_DESTROY_LINK_LIST_CALLBACK) (\r
+ IN LIST_ENTRY *Entry,\r
+ IN VOID *Context OPTIONAL\r
+ );\r
+\r
+/**\r
+ Safe destroy nodes in a linked list, and return the length of the list after all possible operations finished.\r
+\r
+ Destroy network children list by list traversals is not safe due to graph dependencies between nodes.\r
+ This function performs a safe traversal to destroy these nodes by checking to see if the node being destroyed\r
+ has been removed from the list or not.\r
+ If it has been removed, then restart the traversal from the head.\r
+ If it hasn't been removed, then continue with the next node directly.\r
+ This function will end the iterate and return the CallBack's last return value if error happens,\r
+ or retrun EFI_SUCCESS if 2 complete passes are made with no changes in the number of children in the list. \r
+\r
+ @param[in] List The head of the list.\r
+ @param[in] CallBack Pointer to the callback function to destroy one node in the list.\r
+ @param[in] Context Pointer to the callback function's context: corresponds to the\r
+ parameter Context in NET_DESTROY_LINK_LIST_CALLBACK.\r
+ @param[out] ListLength The length of the link list if the function returns successfully.\r
+\r
+ @retval EFI_SUCCESS Two complete passes are made with no changes in the number of children.\r
+ @retval EFI_INVALID_PARAMETER The input parameter is invalid.\r
+ @retval Others Return the CallBack's last return value.\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+NetDestroyLinkList (\r
+ IN LIST_ENTRY *List,\r
+ IN NET_DESTROY_LINK_LIST_CALLBACK CallBack,\r
+ IN VOID *Context, OPTIONAL\r
+ OUT UINTN *ListLength OPTIONAL\r
+ );\r
+\r
+/**\r
+ This function checks the input Handle to see if it's one of these handles in ChildHandleBuffer.\r
+\r
+ @param[in] Handle Handle to be checked.\r
+ @param[in] NumberOfChildren Number of Handles in ChildHandleBuffer.\r
+ @param[in] ChildHandleBuffer An array of child handles to be freed. May be NULL\r
+ if NumberOfChildren is 0.\r
+\r
+ @retval TURE Found the input Handle in ChildHandleBuffer.\r
+ @retval FALSE Can't find the input Handle in ChildHandleBuffer.\r
+\r
+**/\r
+BOOLEAN\r
+EFIAPI\r
+NetIsInHandleBuffer (\r
+ IN EFI_HANDLE Handle,\r
+ IN UINTN NumberOfChildren,\r
+ IN EFI_HANDLE *ChildHandleBuffer OPTIONAL\r
+ );\r
\r
//\r
// Object container: EFI network stack spec defines various kinds of\r
/**\r
Initialize the netmap. Netmap is a reposity to keep the <Key, Value> pairs.\r
\r
- @param Map The netmap to initialize\r
+ Initialize the forward and backward links of two head nodes donated by Map->Used\r
+ and Map->Recycled of two doubly linked lists.\r
+ Initializes the count of the <Key, Value> pairs in the netmap to zero.\r
+\r
+ If Map is NULL, then ASSERT().\r
+ If the address of Map->Used is NULL, then ASSERT().\r
+ If the address of Map->Recycled is NULl, then ASSERT().\r
\r
- @return None\r
+ @param[in, out] Map The netmap to initialize.\r
\r
**/\r
VOID\r
EFIAPI\r
NetMapInit (\r
- IN NET_MAP *Map\r
+ IN OUT NET_MAP *Map\r
);\r
\r
/**\r
To clean up the netmap, that is, release allocated memories.\r
\r
- @param Map The netmap to clean up.\r
+ Removes all nodes of the Used doubly linked list and frees memory of all related netmap items.\r
+ Removes all nodes of the Recycled doubly linked list and free memory of all related netmap items.\r
+ The number of the <Key, Value> pairs in the netmap is set to zero.\r
+\r
+ If Map is NULL, then ASSERT().\r
\r
- @return None\r
+ @param[in, out] Map The netmap to clean up.\r
\r
**/\r
VOID\r
EFIAPI\r
NetMapClean (\r
- IN NET_MAP *Map\r
+ IN OUT NET_MAP *Map\r
);\r
\r
/**\r
- Test whether the netmap is empty\r
+ Test whether the netmap is empty and return true if it is.\r
\r
- @param Map The net map to test\r
+ If the number of the <Key, Value> pairs in the netmap is zero, return TRUE.\r
+\r
+ If Map is NULL, then ASSERT().\r
+\r
+\r
+ @param[in] Map The net map to test.\r
\r
@return TRUE if the netmap is empty, otherwise FALSE.\r
\r
/**\r
Return the number of the <Key, Value> pairs in the netmap.\r
\r
- @param Map The netmap to get the entry number\r
+ @param[in] Map The netmap to get the entry number.\r
\r
@return The entry number in the netmap.\r
\r
/**\r
Allocate an item to save the <Key, Value> pair to the head of the netmap.\r
\r
- @param Map The netmap to insert into\r
- @param Key The user's key\r
- @param Value The user's value for the key\r
+ Allocate an item to save the <Key, Value> pair and add corresponding node entry\r
+ to the beginning of the Used doubly linked list. The number of the <Key, Value>\r
+ pairs in the netmap increase by 1.\r
+\r
+ If Map is NULL, then ASSERT().\r
+\r
+ @param[in, out] Map The netmap to insert into.\r
+ @param[in] Key The user's key.\r
+ @param[in] Value The user's value for the key.\r
\r
- @retval EFI_OUT_OF_RESOURCES Failed to allocate the memory for the item\r
- @retval EFI_SUCCESS The item is inserted to the head\r
+ @retval EFI_OUT_OF_RESOURCES Failed to allocate the memory for the item.\r
+ @retval EFI_SUCCESS The item is inserted to the head.\r
\r
**/\r
EFI_STATUS\r
EFIAPI\r
NetMapInsertHead (\r
- IN NET_MAP *Map,\r
+ IN OUT NET_MAP *Map,\r
IN VOID *Key,\r
IN VOID *Value OPTIONAL\r
);\r
/**\r
Allocate an item to save the <Key, Value> pair to the tail of the netmap.\r
\r
- @param Map The netmap to insert into\r
- @param Key The user's key\r
- @param Value The user's value for the key\r
+ Allocate an item to save the <Key, Value> pair and add corresponding node entry\r
+ to the tail of the Used doubly linked list. The number of the <Key, Value>\r
+ pairs in the netmap increase by 1.\r
+\r
+ If Map is NULL, then ASSERT().\r
+\r
+ @param[in, out] Map The netmap to insert into.\r
+ @param[in] Key The user's key.\r
+ @param[in] Value The user's value for the key.\r
\r
- @retval EFI_OUT_OF_RESOURCES Failed to allocate the memory for the item\r
- @retval EFI_SUCCESS The item is inserted to the tail\r
+ @retval EFI_OUT_OF_RESOURCES Failed to allocate the memory for the item.\r
+ @retval EFI_SUCCESS The item is inserted to the tail.\r
\r
**/\r
EFI_STATUS\r
EFIAPI\r
NetMapInsertTail (\r
- IN NET_MAP *Map,\r
+ IN OUT NET_MAP *Map,\r
IN VOID *Key,\r
IN VOID *Value OPTIONAL\r
);\r
\r
/**\r
- Find the key in the netmap\r
+ Finds the key in the netmap and returns the point to the item containing the Key.\r
+\r
+ Iterate the Used doubly linked list of the netmap to get every item. Compare the key of every\r
+ item with the key to search. It returns the point to the item contains the Key if found.\r
\r
- @param Map The netmap to search within\r
- @param Key The key to search\r
+ If Map is NULL, then ASSERT().\r
+\r
+ @param[in] Map The netmap to search within.\r
+ @param[in] Key The key to search.\r
\r
@return The point to the item contains the Key, or NULL if Key isn't in the map.\r
\r
**/\r
-NET_MAP_ITEM *\r
+NET_MAP_ITEM *\r
EFIAPI\r
NetMapFindKey (\r
IN NET_MAP *Map,\r
);\r
\r
/**\r
- Remove the item from the netmap\r
+ Remove the node entry of the item from the netmap and return the key of the removed item.\r
+\r
+ Remove the node entry of the item from the Used doubly linked list of the netmap.\r
+ The number of the <Key, Value> pairs in the netmap decrease by 1. Then add the node\r
+ entry of the item to the Recycled doubly linked list of the netmap. If Value is not NULL,\r
+ Value will point to the value of the item. It returns the key of the removed item.\r
+\r
+ If Map is NULL, then ASSERT().\r
+ If Item is NULL, then ASSERT().\r
+ if item in not in the netmap, then ASSERT().\r
\r
- @param Map The netmap to remove the item from\r
- @param Item The item to remove\r
- @param Value The variable to receive the value if not NULL\r
+ @param[in, out] Map The netmap to remove the item from.\r
+ @param[in, out] Item The item to remove.\r
+ @param[out] Value The variable to receive the value if not NULL.\r
\r
- @return The key of the removed item.\r
+ @return The key of the removed item.\r
\r
**/\r
VOID *\r
EFIAPI\r
NetMapRemoveItem (\r
- IN NET_MAP *Map,\r
- IN NET_MAP_ITEM *Item,\r
- OUT VOID **Value OPTIONAL\r
+ IN OUT NET_MAP *Map,\r
+ IN OUT NET_MAP_ITEM *Item,\r
+ OUT VOID **Value OPTIONAL\r
);\r
\r
/**\r
- Remove the first entry on the netmap.\r
+ Remove the first node entry on the netmap and return the key of the removed item.\r
+\r
+ Remove the first node entry from the Used doubly linked list of the netmap.\r
+ The number of the <Key, Value> pairs in the netmap decrease by 1. Then add the node\r
+ entry to the Recycled doubly linked list of the netmap. If parameter Value is not NULL,\r
+ parameter Value will point to the value of the item. It returns the key of the removed item.\r
\r
- @param Map The netmap to remove the head from\r
- @param Value The variable to receive the value if not NULL\r
+ If Map is NULL, then ASSERT().\r
+ If the Used doubly linked list is empty, then ASSERT().\r
\r
- @return The key of the item removed\r
+ @param[in, out] Map The netmap to remove the head from.\r
+ @param[out] Value The variable to receive the value if not NULL.\r
+\r
+ @return The key of the item removed.\r
\r
**/\r
VOID *\r
EFIAPI\r
NetMapRemoveHead (\r
- IN NET_MAP *Map,\r
- OUT VOID **Value OPTIONAL\r
+ IN OUT NET_MAP *Map,\r
+ OUT VOID **Value OPTIONAL\r
);\r
\r
/**\r
- Remove the last entry on the netmap.\r
+ Remove the last node entry on the netmap and return the key of the removed item.\r
+\r
+ Remove the last node entry from the Used doubly linked list of the netmap.\r
+ The number of the <Key, Value> pairs in the netmap decrease by 1. Then add the node\r
+ entry to the Recycled doubly linked list of the netmap. If parameter Value is not NULL,\r
+ parameter Value will point to the value of the item. It returns the key of the removed item.\r
\r
- @param Map The netmap to remove the tail from\r
- @param Value The variable to receive the value if not NULL\r
+ If Map is NULL, then ASSERT().\r
+ If the Used doubly linked list is empty, then ASSERT().\r
\r
- @return The key of the item removed\r
+ @param[in, out] Map The netmap to remove the tail from.\r
+ @param[out] Value The variable to receive the value if not NULL.\r
+\r
+ @return The key of the item removed.\r
\r
**/\r
VOID *\r
EFIAPI\r
NetMapRemoveTail (\r
- IN NET_MAP *Map,\r
- OUT VOID **Value OPTIONAL\r
+ IN OUT NET_MAP *Map,\r
+ OUT VOID **Value OPTIONAL\r
);\r
\r
typedef\r
EFI_STATUS\r
-(*NET_MAP_CALLBACK) (\r
+(EFIAPI *NET_MAP_CALLBACK) (\r
IN NET_MAP *Map,\r
IN NET_MAP_ITEM *Item,\r
IN VOID *Arg\r
);\r
\r
/**\r
- Iterate through the netmap and call CallBack for each item. It will\r
- contiue the traverse if CallBack returns EFI_SUCCESS, otherwise, break\r
- from the loop. It returns the CallBack's last return value. This\r
- function is delete safe for the current item.\r
+ Iterate through the netmap and call CallBack for each item.\r
\r
- @param Map The Map to iterate through\r
- @param CallBack The callback function to call for each item.\r
- @param Arg The opaque parameter to the callback\r
+ It will contiue the traverse if CallBack returns EFI_SUCCESS, otherwise, break\r
+ from the loop. It returns the CallBack's last return value. This function is\r
+ delete safe for the current item.\r
\r
- @return It returns the CallBack's last return value.\r
+ If Map is NULL, then ASSERT().\r
+ If CallBack is NULL, then ASSERT().\r
+\r
+ @param[in] Map The Map to iterate through.\r
+ @param[in] CallBack The callback function to call for each item.\r
+ @param[in] Arg The opaque parameter to the callback.\r
+\r
+ @retval EFI_SUCCESS There is no item in the netmap, or CallBack for each item\r
+ returns EFI_SUCCESS.\r
+ @retval Others It returns the CallBack's last return value.\r
\r
**/\r
EFI_STATUS\r
/**\r
Create a child of the service that is identified by ServiceBindingGuid.\r
\r
- @param ControllerHandle The controller which has the service installed.\r
- @param ImageHandle The image handle used to open service.\r
- @param ServiceBindingGuid The service's Guid.\r
- @param ChildHandle The handle to receive the create child\r
+ Get the ServiceBinding Protocol first, then use it to create a child.\r
+\r
+ If ServiceBindingGuid is NULL, then ASSERT().\r
+ If ChildHandle is NULL, then ASSERT().\r
\r
- @retval EFI_SUCCESS The child is successfully created.\r
+ @param[in] Controller The controller which has the service installed.\r
+ @param[in] Image The image handle used to open service.\r
+ @param[in] ServiceBindingGuid The service's Guid.\r
+ @param[in, out] ChildHandle The handle to receive the created child.\r
+\r
+ @retval EFI_SUCCESS The child was successfully created.\r
@retval Others Failed to create the child.\r
\r
**/\r
EFI_STATUS\r
EFIAPI\r
NetLibCreateServiceChild (\r
- IN EFI_HANDLE ControllerHandle,\r
- IN EFI_HANDLE ImageHandle,\r
+ IN EFI_HANDLE Controller,\r
+ IN EFI_HANDLE Image,\r
IN EFI_GUID *ServiceBindingGuid,\r
- OUT EFI_HANDLE *ChildHandle\r
+ IN OUT EFI_HANDLE *ChildHandle\r
);\r
\r
/**\r
- Destory a child of the service that is identified by ServiceBindingGuid.\r
+ Destroy a child of the service that is identified by ServiceBindingGuid.\r
+\r
+ Get the ServiceBinding Protocol first, then use it to destroy a child.\r
\r
- @param ControllerHandle The controller which has the service installed.\r
- @param ImageHandle The image handle used to open service.\r
- @param ServiceBindingGuid The service's Guid.\r
- @param ChildHandle The child to destory\r
+ If ServiceBindingGuid is NULL, then ASSERT().\r
\r
- @retval EFI_SUCCESS The child is successfully destoried.\r
- @retval Others Failed to destory the child.\r
+ @param[in] Controller The controller which has the service installed.\r
+ @param[in] Image The image handle used to open service.\r
+ @param[in] ServiceBindingGuid The service's Guid.\r
+ @param[in] ChildHandle The child to destroy.\r
+\r
+ @retval EFI_SUCCESS The child was destroyed.\r
+ @retval Others Failed to destroy the child.\r
\r
**/\r
EFI_STATUS\r
EFIAPI\r
NetLibDestroyServiceChild (\r
- IN EFI_HANDLE ControllerHandle,\r
- IN EFI_HANDLE ImageHandle,\r
+ IN EFI_HANDLE Controller,\r
+ IN EFI_HANDLE Image,\r
IN EFI_GUID *ServiceBindingGuid,\r
IN EFI_HANDLE ChildHandle\r
);\r
\r
/**\r
- Convert the mac address of the simple network protocol installed on\r
- SnpHandle to a unicode string. Callers are responsible for freeing the\r
- string storage.\r
+ Get handle with Simple Network Protocol installed on it.\r
+\r
+ There should be MNP Service Binding Protocol installed on the input ServiceHandle.\r
+ If Simple Network Protocol is already installed on the ServiceHandle, the\r
+ ServiceHandle will be returned. If SNP is not installed on the ServiceHandle,\r
+ try to find its parent handle with SNP installed.\r
\r
- @param SnpHandle The handle where the simple network protocol is\r
+ @param[in] ServiceHandle The handle where network service binding protocols are\r
installed on.\r
- @param ImageHandle The image handle used to act as the agent handle to\r
- get the simple network protocol.\r
- @param MacString The pointer to store the address of the string\r
- representation of the mac address.\r
+ @param[out] Snp The pointer to store the address of the SNP instance.\r
+ This is an optional parameter that may be NULL.\r
\r
- @retval EFI_OUT_OF_RESOURCES There are not enough memory resource.\r
- @retval other Failed to open the simple network protocol.\r
+ @return The SNP handle, or NULL if not found.\r
+\r
+**/\r
+EFI_HANDLE\r
+EFIAPI\r
+NetLibGetSnpHandle (\r
+ IN EFI_HANDLE ServiceHandle,\r
+ OUT EFI_SIMPLE_NETWORK_PROTOCOL **Snp OPTIONAL\r
+ );\r
+\r
+/**\r
+ Retrieve VLAN ID of a VLAN device handle.\r
+\r
+ Search VLAN device path node in Device Path of specified ServiceHandle and\r
+ return its VLAN ID. If no VLAN device path node found, then this ServiceHandle\r
+ is not a VLAN device handle, and 0 will be returned.\r
+\r
+ @param[in] ServiceHandle The handle where network service binding protocols are\r
+ installed on.\r
+\r
+ @return VLAN ID of the device handle, or 0 if not a VLAN device.\r
+\r
+**/\r
+UINT16\r
+EFIAPI\r
+NetLibGetVlanId (\r
+ IN EFI_HANDLE ServiceHandle\r
+ );\r
+\r
+/**\r
+ Find VLAN device handle with specified VLAN ID.\r
+\r
+ The VLAN child device handle is created by VLAN Config Protocol on ControllerHandle.\r
+ This function will append VLAN device path node to the parent device path,\r
+ and then use LocateDevicePath() to find the correct VLAN device handle.\r
+\r
+ @param[in] ControllerHandle The handle where network service binding protocols are\r
+ installed on.\r
+ @param[in] VlanId The configured VLAN ID for the VLAN device.\r
+\r
+ @return The VLAN device handle, or NULL if not found.\r
+\r
+**/\r
+EFI_HANDLE\r
+EFIAPI\r
+NetLibGetVlanHandle (\r
+ IN EFI_HANDLE ControllerHandle,\r
+ IN UINT16 VlanId\r
+ );\r
+\r
+/**\r
+ Get MAC address associated with the network service handle.\r
+\r
+ There should be MNP Service Binding Protocol installed on the input ServiceHandle.\r
+ If SNP is installed on the ServiceHandle or its parent handle, MAC address will\r
+ be retrieved from SNP. If no SNP found, try to get SNP mode data use MNP.\r
+\r
+ @param[in] ServiceHandle The handle where network service binding protocols are\r
+ installed on.\r
+ @param[out] MacAddress The pointer to store the returned MAC address.\r
+ @param[out] AddressSize The length of returned MAC address.\r
+\r
+ @retval EFI_SUCCESS MAC address was returned successfully.\r
+ @retval Others Failed to get SNP mode data.\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+NetLibGetMacAddress (\r
+ IN EFI_HANDLE ServiceHandle,\r
+ OUT EFI_MAC_ADDRESS *MacAddress,\r
+ OUT UINTN *AddressSize\r
+ );\r
+\r
+/**\r
+ Convert MAC address of the NIC associated with specified Service Binding Handle\r
+ to a unicode string. Callers are responsible for freeing the string storage.\r
+\r
+ Locate simple network protocol associated with the Service Binding Handle and\r
+ get the mac address from SNP. Then convert the mac address into a unicode\r
+ string. It takes 2 unicode characters to represent a 1 byte binary buffer.\r
+ Plus one unicode character for the null-terminator.\r
+\r
+ @param[in] ServiceHandle The handle where network service binding protocol is\r
+ installed.\r
+ @param[in] ImageHandle The image handle used to act as the agent handle to\r
+ get the simple network protocol. This parameter is\r
+ optional and may be NULL.\r
+ @param[out] MacString The pointer to store the address of the string\r
+ representation of the mac address.\r
+\r
+ @retval EFI_SUCCESS Converted the mac address a unicode string successfully.\r
+ @retval EFI_OUT_OF_RESOURCES There are not enough memory resources.\r
+ @retval Others Failed to open the simple network protocol.\r
\r
**/\r
EFI_STATUS\r
EFIAPI\r
NetLibGetMacString (\r
- IN EFI_HANDLE SnpHandle,\r
- IN EFI_HANDLE ImageHandle,\r
- IN OUT CHAR16 **MacString\r
+ IN EFI_HANDLE ServiceHandle,\r
+ IN EFI_HANDLE ImageHandle, OPTIONAL\r
+ OUT CHAR16 **MacString\r
+ );\r
+\r
+/**\r
+ Detect media status for specified network device.\r
+\r
+ The underlying UNDI driver may or may not support reporting media status from\r
+ GET_STATUS command (PXE_STATFLAGS_GET_STATUS_NO_MEDIA_SUPPORTED). This routine\r
+ will try to invoke Snp->GetStatus() to get the media status. If media is already\r
+ present, it returns directly. If media is not present, it will stop SNP and then\r
+ restart SNP to get the latest media status. This provides an opportunity to get \r
+ the correct media status for old UNDI driver, which doesn't support reporting \r
+ media status from GET_STATUS command.\r
+ Note: there are two limitations for the current algorithm:\r
+ 1) For UNDI with this capability, when the cable is not attached, there will\r
+ be an redundant Stop/Start() process.\r
+ 2) for UNDI without this capability, in case that network cable is attached when\r
+ Snp->Initialize() is invoked while network cable is unattached later,\r
+ NetLibDetectMedia() will report MediaPresent as TRUE, causing upper layer\r
+ apps to wait for timeout time.\r
+\r
+ @param[in] ServiceHandle The handle where network service binding protocols are\r
+ installed.\r
+ @param[out] MediaPresent The pointer to store the media status.\r
+\r
+ @retval EFI_SUCCESS Media detection success.\r
+ @retval EFI_INVALID_PARAMETER ServiceHandle is not a valid network device handle.\r
+ @retval EFI_UNSUPPORTED The network device does not support media detection.\r
+ @retval EFI_DEVICE_ERROR SNP is in an unknown state.\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+NetLibDetectMedia (\r
+ IN EFI_HANDLE ServiceHandle,\r
+ OUT BOOLEAN *MediaPresent\r
);\r
\r
/**\r
Create an IPv4 device path node.\r
\r
- @param Node Pointer to the IPv4 device path node.\r
- @param Controller The handle where the NIC IP4 config protocol resides.\r
- @param LocalIp The local IPv4 address.\r
- @param LocalPort The local port.\r
- @param RemoteIp The remote IPv4 address.\r
- @param RemotePort The remote port.\r
- @param Protocol The protocol type in the IP header.\r
- @param UseDefaultAddress Whether this instance is using default address or not.\r
+ The header type of IPv4 device path node is MESSAGING_DEVICE_PATH.\r
+ The header subtype of IPv4 device path node is MSG_IPv4_DP.\r
+ The length of the IPv4 device path node in bytes is 19.\r
+ Get other information from parameters to make up the whole IPv4 device path node.\r
+\r
+ @param[in, out] Node The pointer to the IPv4 device path node.\r
+ @param[in] Controller The controller handle.\r
+ @param[in] LocalIp The local IPv4 address.\r
+ @param[in] LocalPort The local port.\r
+ @param[in] RemoteIp The remote IPv4 address.\r
+ @param[in] RemotePort The remote port.\r
+ @param[in] Protocol The protocol type in the IP header.\r
+ @param[in] UseDefaultAddress Whether this instance is using default address or not.\r
\r
- @retval None\r
**/\r
VOID\r
EFIAPI\r
IN BOOLEAN UseDefaultAddress\r
);\r
\r
+/**\r
+ Create an IPv6 device path node.\r
+\r
+ The header type of IPv6 device path node is MESSAGING_DEVICE_PATH.\r
+ The header subtype of IPv6 device path node is MSG_IPv6_DP.\r
+ The length of the IPv6 device path node in bytes is 43.\r
+ Get other information from parameters to make up the whole IPv6 device path node.\r
+\r
+ @param[in, out] Node The pointer to the IPv6 device path node.\r
+ @param[in] Controller The controller handle.\r
+ @param[in] LocalIp The local IPv6 address.\r
+ @param[in] LocalPort The local port.\r
+ @param[in] RemoteIp The remote IPv6 address.\r
+ @param[in] RemotePort The remote port.\r
+ @param[in] Protocol The protocol type in the IP header.\r
+\r
+**/\r
+VOID\r
+EFIAPI\r
+NetLibCreateIPv6DPathNode (\r
+ IN OUT IPv6_DEVICE_PATH *Node,\r
+ IN EFI_HANDLE Controller,\r
+ IN EFI_IPv6_ADDRESS *LocalIp,\r
+ IN UINT16 LocalPort,\r
+ IN EFI_IPv6_ADDRESS *RemoteIp,\r
+ IN UINT16 RemotePort,\r
+ IN UINT16 Protocol\r
+ );\r
+\r
+\r
/**\r
Find the UNDI/SNP handle from controller and protocol GUID.\r
- For example, IP will open a MNP child to transmit/receive\r
- packets, when MNP is stopped, IP should also be stopped. IP\r
- needs to find its own private data which is related the IP's\r
- service binding instance that is install on UNDI/SNP handle.\r
- Now, the controller is either a MNP or ARP child handle. But\r
- IP opens these handle BY_DRIVER, use that info, we can get the\r
+\r
+ For example, IP will open an MNP child to transmit/receive\r
+ packets. When MNP is stopped, IP should also be stopped. IP\r
+ needs to find its own private data that is related the IP's\r
+ service binding instance that is installed on the UNDI/SNP handle.\r
+ The controller is then either an MNP or an ARP child handle. Note that\r
+ IP opens these handles using BY_DRIVER. Use that infomation to get the\r
UNDI/SNP handle.\r
\r
- @param Controller Then protocol handle to check\r
- @param ProtocolGuid The protocol that is related with the handle.\r
+ @param[in] Controller The protocol handle to check.\r
+ @param[in] ProtocolGuid The protocol that is related with the handle.\r
\r
- @return The UNDI/SNP handle or NULL.\r
+ @return The UNDI/SNP handle or NULL for errors.\r
\r
**/\r
EFI_HANDLE\r
);\r
\r
/**\r
- Add a Deferred Procedure Call to the end of the DPC queue.\r
+ This is the default unload handle for all the network drivers.\r
+\r
+ Disconnect the driver specified by ImageHandle from all the devices in the handle database.\r
+ Uninstall all the protocols installed in the driver entry point.\r
\r
- @param DpcTpl The EFI_TPL that the DPC should be invoked.\r
- @param DpcProcedure Pointer to the DPC's function.\r
- @param DpcContext Pointer to the DPC's context. Passed to DpcProcedure\r
- when DpcProcedure is invoked.\r
+ @param[in] ImageHandle The drivers' driver image.\r
\r
- @retval EFI_SUCCESS The DPC was queued.\r
- @retval EFI_INVALID_PARAMETER DpcTpl is not a valid EFI_TPL.\r
- DpcProcedure is NULL.\r
- @retval EFI_OUT_OF_RESOURCES There are not enough resources available to\r
- add the DPC to the queue.\r
+ @retval EFI_SUCCESS The image is unloaded.\r
+ @retval Others Failed to unload the image.\r
\r
**/\r
EFI_STATUS\r
EFIAPI\r
-NetLibQueueDpc (\r
- IN EFI_TPL DpcTpl,\r
- IN EFI_DPC_PROCEDURE DpcProcedure,\r
- IN VOID *DpcContext OPTIONAL\r
+NetLibDefaultUnload (\r
+ IN EFI_HANDLE ImageHandle\r
);\r
\r
/**\r
- Add a Deferred Procedure Call to the end of the DPC queue.\r
+ Convert one Null-terminated ASCII string (decimal dotted) to EFI_IPv4_ADDRESS.\r
+\r
+ @param[in] String The pointer to the Ascii string.\r
+ @param[out] Ip4Address The pointer to the converted IPv4 address.\r
\r
- @retval EFI_SUCCESS One or more DPCs were invoked.\r
- @retval EFI_NOT_FOUND No DPCs were invoked.\r
+ @retval EFI_SUCCESS Converted to an IPv4 address successfully.\r
+ @retval EFI_INVALID_PARAMETER The string is malformated, or Ip4Address is NULL.\r
\r
**/\r
EFI_STATUS\r
EFIAPI\r
-NetLibDispatchDpc (\r
- VOID\r
+NetLibAsciiStrToIp4 (\r
+ IN CONST CHAR8 *String,\r
+ OUT EFI_IPv4_ADDRESS *Ip4Address\r
);\r
\r
/**\r
- This is the default unload handle for all the network drivers.\r
+ Convert one Null-terminated ASCII string to EFI_IPv6_ADDRESS. The format of the\r
+ string is defined in RFC 4291 - Text Pepresentation of Addresses.\r
\r
- @param ImageHandle The drivers' driver image.\r
+ @param[in] String The pointer to the Ascii string.\r
+ @param[out] Ip6Address The pointer to the converted IPv6 address.\r
\r
- @retval EFI_SUCCESS The image is unloaded.\r
- @retval Others Failed to unload the image.\r
+ @retval EFI_SUCCESS Converted to an IPv6 address successfully.\r
+ @retval EFI_INVALID_PARAMETER The string is malformated, or Ip6Address is NULL.\r
\r
**/\r
EFI_STATUS\r
EFIAPI\r
-NetLibDefaultUnload (\r
- IN EFI_HANDLE ImageHandle\r
+NetLibAsciiStrToIp6 (\r
+ IN CONST CHAR8 *String,\r
+ OUT EFI_IPv6_ADDRESS *Ip6Address\r
+ );\r
+\r
+/**\r
+ Convert one Null-terminated Unicode string (decimal dotted) to EFI_IPv4_ADDRESS.\r
+\r
+ @param[in] String The pointer to the Ascii string.\r
+ @param[out] Ip4Address The pointer to the converted IPv4 address.\r
+\r
+ @retval EFI_SUCCESS Converted to an IPv4 address successfully.\r
+ @retval EFI_INVALID_PARAMETER The string is mal-formated or Ip4Address is NULL.\r
+ @retval EFI_OUT_OF_RESOURCES Failed to perform the operation due to lack of resources.\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+NetLibStrToIp4 (\r
+ IN CONST CHAR16 *String,\r
+ OUT EFI_IPv4_ADDRESS *Ip4Address\r
+ );\r
+\r
+/**\r
+ Convert one Null-terminated Unicode string to EFI_IPv6_ADDRESS. The format of\r
+ the string is defined in RFC 4291 - Text Pepresentation of Addresses.\r
+\r
+ @param[in] String The pointer to the Ascii string.\r
+ @param[out] Ip6Address The pointer to the converted IPv6 address.\r
+\r
+ @retval EFI_SUCCESS Converted to an IPv6 address successfully.\r
+ @retval EFI_INVALID_PARAMETER The string is malformated or Ip6Address is NULL.\r
+ @retval EFI_OUT_OF_RESOURCES Failed to perform the operation due to a lack of resources.\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+NetLibStrToIp6 (\r
+ IN CONST CHAR16 *String,\r
+ OUT EFI_IPv6_ADDRESS *Ip6Address\r
);\r
\r
-typedef enum {\r
- //\r
- //Various signatures\r
- //\r
- NET_BUF_SIGNATURE = EFI_SIGNATURE_32 ('n', 'b', 'u', 'f'),\r
- NET_VECTOR_SIGNATURE = EFI_SIGNATURE_32 ('n', 'v', 'e', 'c'),\r
- NET_QUE_SIGNATURE = EFI_SIGNATURE_32 ('n', 'b', 'q', 'u'),\r
+/**\r
+ Convert one Null-terminated Unicode string to EFI_IPv6_ADDRESS and prefix length.\r
+ The format of the string is defined in RFC 4291 - Text Pepresentation of Addresses\r
+ Prefixes: ipv6-address/prefix-length.\r
\r
+ @param[in] String The pointer to the Ascii string.\r
+ @param[out] Ip6Address The pointer to the converted IPv6 address.\r
+ @param[out] PrefixLength The pointer to the converted prefix length.\r
\r
- NET_PROTO_DATA = 64, // Opaque buffer for protocols\r
- NET_BUF_HEAD = 1, // Trim or allocate space from head\r
- NET_BUF_TAIL = 0, // Trim or allocate space from tail\r
- NET_VECTOR_OWN_FIRST = 0x01 // We allocated the 1st block in the vector\r
-} NET_SIGNATURE_TYPE;\r
+ @retval EFI_SUCCESS Converted to an IPv6 address successfully.\r
+ @retval EFI_INVALID_PARAMETER The string is malformated, or Ip6Address is NULL.\r
+ @retval EFI_OUT_OF_RESOURCES Failed to perform the operation due to a lack of resources.\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+NetLibStrToIp6andPrefix (\r
+ IN CONST CHAR16 *String,\r
+ OUT EFI_IPv6_ADDRESS *Ip6Address,\r
+ OUT UINT8 *PrefixLength\r
+ );\r
+\r
+/**\r
+\r
+ Convert one EFI_IPv6_ADDRESS to Null-terminated Unicode string.\r
+ The text representation of address is defined in RFC 4291.\r
+ \r
+ @param[in] Ip6Address The pointer to the IPv6 address.\r
+ @param[out] String The buffer to return the converted string.\r
+ @param[in] StringSize The length in bytes of the input String.\r
+ \r
+ @retval EFI_SUCCESS Convert to string successfully.\r
+ @retval EFI_INVALID_PARAMETER The input parameter is invalid.\r
+ @retval EFI_BUFFER_TOO_SMALL The BufferSize is too small for the result. BufferSize has been \r
+ updated with the size needed to complete the request.\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+NetLibIp6ToStr (\r
+ IN EFI_IPv6_ADDRESS *Ip6Address,\r
+ OUT CHAR16 *String,\r
+ IN UINTN StringSize\r
+ );\r
+\r
+//\r
+// Various signatures\r
+//\r
+#define NET_BUF_SIGNATURE SIGNATURE_32 ('n', 'b', 'u', 'f')\r
+#define NET_VECTOR_SIGNATURE SIGNATURE_32 ('n', 'v', 'e', 'c')\r
+#define NET_QUE_SIGNATURE SIGNATURE_32 ('n', 'b', 'q', 'u')\r
+\r
+\r
+#define NET_PROTO_DATA 64 // Opaque buffer for protocols\r
+#define NET_BUF_HEAD 1 // Trim or allocate space from head\r
+#define NET_BUF_TAIL 0 // Trim or allocate space from tail\r
+#define NET_VECTOR_OWN_FIRST 0x01 // We allocated the 1st block in the vector\r
\r
#define NET_CHECK_SIGNATURE(PData, SIGNATURE) \\r
ASSERT (((PData) != NULL) && ((PData)->Signature == (SIGNATURE)))\r
\r
-#define NET_SWAP_SHORT(Value) \\r
- ((((Value) & 0xff) << 8) | (((Value) >> 8) & 0xff))\r
-\r
//\r
// Single memory block in the vector.\r
//\r
UINT8 *Bulk; // The block's Data\r
} NET_BLOCK;\r
\r
-typedef VOID (*NET_VECTOR_EXT_FREE) (VOID *Arg);\r
+typedef VOID (EFIAPI *NET_VECTOR_EXT_FREE) (VOID *Arg);\r
\r
//\r
//NET_VECTOR contains several blocks to hold all packet's\r
} NET_VECTOR;\r
\r
//\r
-//NET_BLOCK_OP operate on the NET_BLOCK, It specifies\r
-//where the actual fragment begins and where it ends\r
+//NET_BLOCK_OP operates on the NET_BLOCK. It specifies\r
+//where the actual fragment begins and ends\r
//\r
typedef struct {\r
UINT8 *BlockHead; // Block's head, or the smallest valid Head\r
UINT32 Size; // The size of the data\r
} NET_BLOCK_OP;\r
\r
+typedef union {\r
+ IP4_HEAD *Ip4;\r
+ EFI_IP6_HEADER *Ip6;\r
+} NET_IP_HEAD;\r
\r
//\r
//NET_BUF is the buffer manage structure used by the\r
-//network stack. Every network packet may be fragmented,\r
-//and contains multiple fragments. The Vector points to\r
-//memory blocks used by the each fragment, and BlockOp\r
+//network stack. Every network packet may be fragmented. The Vector points to\r
+//memory blocks used by each fragment, and BlockOp\r
//specifies where each fragment begins and ends.\r
//\r
-//It also contains a opaque area for protocol to store\r
-//per-packet informations. Protocol must be caution not\r
+//It also contains an opaque area for the protocol to store\r
+//per-packet information. Protocol must be careful not\r
//to overwrite the members after that.\r
//\r
typedef struct {\r
- UINT32 Signature;\r
- INTN RefCnt;\r
- LIST_ENTRY List; // The List this NET_BUF is on\r
+ UINT32 Signature;\r
+ INTN RefCnt;\r
+ LIST_ENTRY List; // The List this NET_BUF is on\r
\r
- IP4_HEAD *Ip; // Network layer header, for fast access\r
- TCP_HEAD *Tcp; // Transport layer header, for fast access\r
- UINT8 ProtoData [NET_PROTO_DATA]; //Protocol specific data\r
+ NET_IP_HEAD Ip; // Network layer header, for fast access\r
+ TCP_HEAD *Tcp; // Transport layer header, for fast access\r
+ EFI_UDP_HEADER *Udp; // User Datagram Protocol header\r
+ UINT8 ProtoData [NET_PROTO_DATA]; //Protocol specific data\r
\r
- NET_VECTOR *Vector; // The vector containing the packet\r
+ NET_VECTOR *Vector; // The vector containing the packet\r
\r
- UINT32 BlockOpNum; // Total number of BlockOp in the buffer\r
- UINT32 TotalSize; // Total size of the actual packet\r
- NET_BLOCK_OP BlockOp[1]; // Specify the position of actual packet\r
+ UINT32 BlockOpNum; // Total number of BlockOp in the buffer\r
+ UINT32 TotalSize; // Total size of the actual packet\r
+ NET_BLOCK_OP BlockOp[1]; // Specify the position of actual packet\r
} NET_BUF;\r
\r
-\r
//\r
-//A queue of NET_BUFs, It is just a thin extension of\r
+//A queue of NET_BUFs. It is a thin extension of\r
//NET_BUF functions.\r
//\r
typedef struct {\r
UINT8 Protocol;\r
UINT16 Len;\r
} NET_PSEUDO_HDR;\r
+\r
+typedef struct {\r
+ EFI_IPv6_ADDRESS SrcIp;\r
+ EFI_IPv6_ADDRESS DstIp;\r
+ UINT32 Len;\r
+ UINT32 Reserved:24;\r
+ UINT32 NextHeader:8;\r
+} NET_IP6_PSEUDO_HDR;\r
#pragma pack()\r
\r
//\r
Allocate a single block NET_BUF. Upon allocation, all the\r
free space is in the tail room.\r
\r
- @param Len The length of the block.\r
+ @param[in] Len The length of the block.\r
\r
- @retval * Pointer to the allocated NET_BUF. If NULL the\r
- allocation failed due to resource limit.\r
+ @return The pointer to the allocated NET_BUF, or NULL if the\r
+ allocation failed due to resource limitations.\r
\r
**/\r
NET_BUF *\r
);\r
\r
/**\r
- Free the buffer and its associated NET_VECTOR.\r
+ Free the net buffer and its associated NET_VECTOR.\r
\r
- @param Nbuf Pointer to the NET_BUF to be freed.\r
+ Decrease the reference count of the net buffer by one. Free the associated net\r
+ vector and itself if the reference count of the net buffer is decreased to 0.\r
+ The net vector free operation decreases the reference count of the net\r
+ vector by one, and performs the resource free operation when the reference count\r
+ of the net vector is 0.\r
\r
- @return None.\r
+ @param[in] Nbuf The pointer to the NET_BUF to be freed.\r
\r
**/\r
VOID\r
);\r
\r
/**\r
- Get the position of some byte in the net buffer. This can be used\r
- to, for example, retrieve the IP header in the packet. It also\r
- returns the fragment that contains the byte which is used mainly by\r
- the buffer implementation itself.\r
+ Get the index of NET_BLOCK_OP that contains the byte at Offset in the net\r
+ buffer.\r
\r
- @param Nbuf Pointer to the net buffer.\r
- @param Offset The index or offset of the byte\r
- @param Index Index of the fragment that contains the block\r
+ For example, this function can be used to retrieve the IP header in the packet. It\r
+ also can be used to get the fragment that contains the byte used\r
+ mainly by the library implementation itself.\r
\r
- @retval * Pointer to the nth byte of data in the net buffer.\r
- If NULL, there is no such data in the net buffer.\r
+ @param[in] Nbuf The pointer to the net buffer.\r
+ @param[in] Offset The offset of the byte.\r
+ @param[out] Index Index of the NET_BLOCK_OP that contains the byte at\r
+ Offset.\r
+\r
+ @return The pointer to the Offset'th byte of data in the net buffer, or NULL\r
+ if there is no such data in the net buffer.\r
\r
**/\r
UINT8 *\r
NetbufGetByte (\r
IN NET_BUF *Nbuf,\r
IN UINT32 Offset,\r
- OUT UINT32 *Index OPTIONAL\r
+ OUT UINT32 *Index OPTIONAL\r
);\r
\r
/**\r
- Create a copy of NET_BUF that share the associated NET_DATA.\r
+ Create a copy of the net buffer that shares the associated net vector.\r
+\r
+ The reference count of the newly created net buffer is set to 1. The reference\r
+ count of the associated net vector is increased by one.\r
\r
- @param Nbuf Pointer to the net buffer to be cloned.\r
+ @param[in] Nbuf The pointer to the net buffer to be cloned.\r
\r
- @retval * Pointer to the cloned net buffer.\r
+ @return The pointer to the cloned net buffer, or NULL if the\r
+ allocation failed due to resource limitations.\r
\r
**/\r
-NET_BUF *\r
+NET_BUF *\r
EFIAPI\r
NetbufClone (\r
IN NET_BUF *Nbuf\r
);\r
\r
/**\r
- Create a duplicated copy of Nbuf, data is copied. Also leave some\r
- head space before the data.\r
+ Create a duplicated copy of the net buffer with data copied and HeadSpace\r
+ bytes of head space reserved.\r
\r
- @param Nbuf Pointer to the net buffer to be cloned.\r
- @param Duplicate Pointer to the net buffer to duplicate to, if NULL\r
- a new net buffer is allocated.\r
- @param HeadSpace Length of the head space to reserve\r
+ The duplicated net buffer will allocate its own memory to hold the data of the\r
+ source net buffer.\r
\r
- @retval * Pointer to the duplicated net buffer.\r
+ @param[in] Nbuf The pointer to the net buffer to be duplicated from.\r
+ @param[in, out] Duplicate The pointer to the net buffer to duplicate to. If\r
+ NULL, a new net buffer is allocated.\r
+ @param[in] HeadSpace The length of the head space to reserve.\r
+\r
+ @return The pointer to the duplicated net buffer, or NULL if\r
+ the allocation failed due to resource limitations.\r
\r
**/\r
NET_BUF *\r
EFIAPI\r
NetbufDuplicate (\r
IN NET_BUF *Nbuf,\r
- IN NET_BUF *Duplicate OPTIONAL,\r
+ IN OUT NET_BUF *Duplicate OPTIONAL,\r
IN UINT32 HeadSpace\r
);\r
\r
/**\r
- Create a NET_BUF structure which contains Len byte data of\r
- Nbuf starting from Offset. A new NET_BUF structure will be\r
- created but the associated data in NET_VECTOR is shared.\r
- This function exists to do IP packet fragmentation.\r
+ Create a NET_BUF structure which contains Len byte data of Nbuf starting from\r
+ Offset.\r
+\r
+ A new NET_BUF structure will be created but the associated data in NET_VECTOR\r
+ is shared. This function exists to perform IP packet fragmentation.\r
\r
- @param Nbuf Pointer to the net buffer to be cloned.\r
- @param Offset Starting point of the data to be included in new\r
- buffer.\r
- @param Len How many data to include in new data\r
- @param HeadSpace How many bytes of head space to reserve for\r
- protocol header\r
+ @param[in] Nbuf The pointer to the net buffer to be extracted.\r
+ @param[in] Offset Starting point of the data to be included in the new\r
+ net buffer.\r
+ @param[in] Len The bytes of data to be included in the new net buffer.\r
+ @param[in] HeadSpace The bytes of the head space to reserve for the protocol header.\r
\r
- @retval * Pointer to the cloned net buffer.\r
+ @return The pointer to the cloned net buffer, or NULL if the\r
+ allocation failed due to resource limitations.\r
\r
**/\r
NET_BUF *\r
);\r
\r
/**\r
- Reserve some space in the header room of the buffer.\r
- Upon allocation, all the space are in the tail room\r
- of the buffer. Call this function to move some space\r
- to the header room. This function is quite limited in\r
- that it can only reserver space from the first block\r
- of an empty NET_BUF not built from the external. But\r
- it should be enough for the network stack.\r
+ Reserve some space in the header room of the net buffer.\r
\r
- @param Nbuf Pointer to the net buffer.\r
- @param Len The length of buffer to be reserverd.\r
+ Upon allocation, all the space is in the tail room of the buffer. Call this\r
+ function to move space to the header room. This function is quite limited\r
+ in that it can only reserve space from the first block of an empty NET_BUF not\r
+ built from the external. However, it should be enough for the network stack.\r
\r
- @return None.\r
+ @param[in, out] Nbuf The pointer to the net buffer.\r
+ @param[in] Len The length of buffer to be reserved from the header.\r
\r
**/\r
VOID\r
EFIAPI\r
NetbufReserve (\r
- IN NET_BUF *Nbuf,\r
+ IN OUT NET_BUF *Nbuf,\r
IN UINT32 Len\r
);\r
\r
/**\r
- Allocate some space from the header or tail of the buffer.\r
+ Allocate Len bytes of space from the header or tail of the buffer.\r
\r
- @param Nbuf Pointer to the net buffer.\r
- @param Len The length of the buffer to be allocated.\r
- @param FromHead The flag to indicate whether reserve the data from\r
- head or tail. TRUE for from head, and FALSE for\r
- from tail.\r
+ @param[in, out] Nbuf The pointer to the net buffer.\r
+ @param[in] Len The length of the buffer to be allocated.\r
+ @param[in] FromHead The flag to indicate whether to reserve the data\r
+ from head (TRUE) or tail (FALSE).\r
\r
- @retval * Pointer to the first byte of the allocated buffer.\r
+ @return The pointer to the first byte of the allocated buffer,\r
+ or NULL, if there is no sufficient space.\r
\r
**/\r
-UINT8 *\r
+UINT8*\r
EFIAPI\r
NetbufAllocSpace (\r
- IN NET_BUF *Nbuf,\r
+ IN OUT NET_BUF *Nbuf,\r
IN UINT32 Len,\r
IN BOOLEAN FromHead\r
);\r
\r
/**\r
- Trim some data from the header or tail of the buffer.\r
+ Trim Len bytes from the header or the tail of the net buffer.\r
\r
- @param Nbuf Pointer to the net buffer.\r
- @param Len The length of the data to be trimmed.\r
- @param FromHead The flag to indicate whether trim data from head or\r
- tail. TRUE for from head, and FALSE for from tail.\r
+ @param[in, out] Nbuf The pointer to the net buffer.\r
+ @param[in] Len The length of the data to be trimmed.\r
+ @param[in] FromHead The flag to indicate whether trim data is from the \r
+ head (TRUE) or the tail (FALSE).\r
\r
- @retval UINTN Length of the actually trimmed data.\r
+ @return The length of the actual trimmed data, which may be less\r
+ than Len if the TotalSize of Nbuf is less than Len.\r
\r
**/\r
UINT32\r
EFIAPI\r
NetbufTrim (\r
- IN NET_BUF *Nbuf,\r
+ IN OUT NET_BUF *Nbuf,\r
IN UINT32 Len,\r
IN BOOLEAN FromHead\r
);\r
\r
/**\r
- Copy the data from the specific offset to the destination.\r
+ Copy Len bytes of data from the specific offset of the net buffer to the\r
+ destination memory.\r
+\r
+ The Len bytes of data may cross several fragments of the net buffer.\r
\r
- @param Nbuf Pointer to the net buffer.\r
- @param Offset The sequence number of the first byte to copy.\r
- @param Len Length of the data to copy.\r
- @param Dest The destination of the data to copy to.\r
+ @param[in] Nbuf The pointer to the net buffer.\r
+ @param[in] Offset The sequence number of the first byte to copy.\r
+ @param[in] Len The length of the data to copy.\r
+ @param[in] Dest The destination of the data to copy to.\r
\r
- @retval UINTN The length of the copied data.\r
+ @return The length of the actual copied data, or 0 if the offset\r
+ specified exceeds the total size of net buffer.\r
\r
**/\r
UINT32\r
/**\r
Build a NET_BUF from external blocks.\r
\r
- @param ExtFragment Pointer to the data block.\r
- @param ExtNum The number of the data block.\r
- @param HeadSpace The head space to be reserved.\r
- @param HeadLen The length of the protocol header, This function\r
- will pull that number of data into a linear block.\r
- @param ExtFree Pointer to the caller provided free function.\r
- @param Arg The argument passed to ExtFree when ExtFree is\r
- called.\r
+ A new NET_BUF structure will be created from external blocks. An additional block\r
+ of memory will be allocated to hold reserved HeadSpace bytes of header room\r
+ and existing HeadLen bytes of header, but the external blocks are shared by the\r
+ net buffer to avoid data copying.\r
\r
- @retval * Pointer to the net buffer built from the data\r
- blocks.\r
+ @param[in] ExtFragment The pointer to the data block.\r
+ @param[in] ExtNum The number of the data blocks.\r
+ @param[in] HeadSpace The head space to be reserved.\r
+ @param[in] HeadLen The length of the protocol header. The function\r
+ pulls this amount of data into a linear block.\r
+ @param[in] ExtFree The pointer to the caller-provided free function.\r
+ @param[in] Arg The argument passed to ExtFree when ExtFree is\r
+ called.\r
+\r
+ @return The pointer to the net buffer built from the data blocks,\r
+ or NULL if the allocation failed due to resource\r
+ limit.\r
\r
**/\r
NET_BUF *\r
);\r
\r
/**\r
- Build a fragment table to contain the fragments in the\r
- buffer. This is the opposite of the NetbufFromExt.\r
+ Build a fragment table to contain the fragments in the net buffer. This is the\r
+ opposite operation of the NetbufFromExt.\r
\r
- @param Nbuf Point to the net buffer\r
- @param ExtFragment Pointer to the data block.\r
- @param ExtNum The number of the data block.\r
+ @param[in] Nbuf Points to the net buffer.\r
+ @param[in, out] ExtFragment The pointer to the data block.\r
+ @param[in, out] ExtNum The number of the data blocks.\r
\r
- @retval EFI_BUFFER_TOO_SMALL The number of non-empty block is bigger than ExtNum\r
- @retval EFI_SUCCESS Fragment table built.\r
+ @retval EFI_BUFFER_TOO_SMALL The number of non-empty blocks is bigger than\r
+ ExtNum.\r
+ @retval EFI_SUCCESS The fragment table was built successfully.\r
\r
**/\r
EFI_STATUS\r
EFIAPI\r
NetbufBuildExt (\r
IN NET_BUF *Nbuf,\r
- IN NET_FRAGMENT *ExtFragment,\r
- IN UINT32 *ExtNum\r
+ IN OUT NET_FRAGMENT *ExtFragment,\r
+ IN OUT UINT32 *ExtNum\r
);\r
\r
/**\r
- Build a NET_BUF from a list of NET_BUF.\r
+ Build a net buffer from a list of net buffers.\r
+\r
+ All the fragments will be collected from the list of NEW_BUF, and then a new\r
+ net buffer will be created through NetbufFromExt.\r
\r
- @param BufList A List of NET_BUF.\r
- @param HeadSpace The head space to be reserved.\r
- @param HeaderLen The length of the protocol header, This function\r
- will pull that number of data into a linear block.\r
- @param ExtFree Pointer to the caller provided free function.\r
- @param Arg The argument passed to ExtFree when ExtFree is\r
- called.\r
+ @param[in] BufList A List of the net buffer.\r
+ @param[in] HeadSpace The head space to be reserved.\r
+ @param[in] HeaderLen The length of the protocol header. The function\r
+ pulls this amount of data into a linear block.\r
+ @param[in] ExtFree The pointer to the caller provided free function.\r
+ @param[in] Arg The argument passed to ExtFree when ExtFree is called.\r
\r
- @retval * Pointer to the net buffer built from the data\r
- blocks.\r
+ @return The pointer to the net buffer built from the list of net\r
+ buffers.\r
\r
**/\r
NET_BUF *\r
IN UINT32 HeadSpace,\r
IN UINT32 HeaderLen,\r
IN NET_VECTOR_EXT_FREE ExtFree,\r
- IN VOID *Arg OPTIONAL\r
+ IN VOID *Arg OPTIONAL\r
);\r
\r
/**\r
Free a list of net buffers.\r
\r
- @param Head Pointer to the head of linked net buffers.\r
-\r
- @return None.\r
+ @param[in, out] Head The pointer to the head of linked net buffers.\r
\r
**/\r
VOID\r
EFIAPI\r
NetbufFreeList (\r
- IN LIST_ENTRY *Head\r
+ IN OUT LIST_ENTRY *Head\r
);\r
\r
/**\r
Initiate the net buffer queue.\r
\r
- @param NbufQue Pointer to the net buffer queue to be initiated.\r
-\r
- @return None.\r
+ @param[in, out] NbufQue The pointer to the net buffer queue to be initialized.\r
\r
**/\r
VOID\r
EFIAPI\r
NetbufQueInit (\r
- IN NET_BUF_QUEUE *NbufQue\r
+ IN OUT NET_BUF_QUEUE *NbufQue\r
);\r
\r
/**\r
- Allocate an initialized net buffer queue.\r
-\r
- None.\r
+ Allocate and initialize a net buffer queue.\r
\r
- @retval * Pointer to the allocated net buffer queue.\r
+ @return The pointer to the allocated net buffer queue, or NULL if the\r
+ allocation failed due to resource limit.\r
\r
**/\r
NET_BUF_QUEUE *\r
/**\r
Free a net buffer queue.\r
\r
- @param NbufQue Poitner to the net buffer queue to be freed.\r
+ Decrease the reference count of the net buffer queue by one. The real resource\r
+ free operation isn't performed until the reference count of the net buffer\r
+ queue is decreased to 0.\r
\r
- @return None.\r
+ @param[in] NbufQue The pointer to the net buffer queue to be freed.\r
\r
**/\r
VOID\r
);\r
\r
/**\r
- Remove a net buffer from head in the specific queue.\r
+ Remove a net buffer from the head in the specific queue and return it.\r
\r
- @param NbufQue Pointer to the net buffer queue.\r
+ @param[in, out] NbufQue The pointer to the net buffer queue.\r
\r
- @retval * Pointer to the net buffer removed from the specific\r
- queue.\r
+ @return The pointer to the net buffer removed from the specific queue,\r
+ or NULL if there is no net buffer in the specific queue.\r
\r
**/\r
NET_BUF *\r
EFIAPI\r
NetbufQueRemove (\r
- IN NET_BUF_QUEUE *NbufQue\r
+ IN OUT NET_BUF_QUEUE *NbufQue\r
);\r
\r
/**\r
- Append a buffer to the end of the queue.\r
+ Append a net buffer to the net buffer queue.\r
\r
- @param NbufQue Pointer to the net buffer queue.\r
- @param Nbuf Pointer to the net buffer to be appended.\r
-\r
- @return None.\r
+ @param[in, out] NbufQue The pointer to the net buffer queue.\r
+ @param[in, out] Nbuf The pointer to the net buffer to be appended.\r
\r
**/\r
VOID\r
EFIAPI\r
NetbufQueAppend (\r
- IN NET_BUF_QUEUE *NbufQue,\r
- IN NET_BUF *Nbuf\r
+ IN OUT NET_BUF_QUEUE *NbufQue,\r
+ IN OUT NET_BUF *Nbuf\r
);\r
\r
/**\r
- Copy some data from the buffer queue to the destination.\r
+ Copy Len bytes of data from the net buffer queue at the specific offset to the\r
+ destination memory.\r
\r
- @param NbufQue Pointer to the net buffer queue.\r
- @param Offset The sequence number of the first byte to copy.\r
- @param Len Length of the data to copy.\r
- @param Dest The destination of the data to copy to.\r
+ The copying operation is the same as NetbufCopy, but applies to the net buffer\r
+ queue instead of the net buffer.\r
\r
- @retval UINTN The length of the copied data.\r
+ @param[in] NbufQue The pointer to the net buffer queue.\r
+ @param[in] Offset The sequence number of the first byte to copy.\r
+ @param[in] Len The length of the data to copy.\r
+ @param[out] Dest The destination of the data to copy to.\r
+\r
+ @return The length of the actual copied data, or 0 if the offset\r
+ specified exceeds the total size of net buffer queue.\r
\r
**/\r
UINT32\r
IN NET_BUF_QUEUE *NbufQue,\r
IN UINT32 Offset,\r
IN UINT32 Len,\r
- IN UINT8 *Dest\r
+ OUT UINT8 *Dest\r
);\r
\r
/**\r
- Trim some data from the queue header, release the buffer if\r
- whole buffer is trimmed.\r
+ Trim Len bytes of data from the buffer queue and free any net buffer\r
+ that is completely trimmed.\r
+\r
+ The trimming operation is the same as NetbufTrim but applies to the net buffer\r
+ queue instead of the net buffer.\r
\r
- @param NbufQue Pointer to the net buffer queue.\r
- @param Len Length of the data to trim.\r
+ @param[in, out] NbufQue The pointer to the net buffer queue.\r
+ @param[in] Len The length of the data to trim.\r
\r
- @retval UINTN The length of the data trimmed.\r
+ @return The actual length of the data trimmed.\r
\r
**/\r
UINT32\r
EFIAPI\r
NetbufQueTrim (\r
- IN NET_BUF_QUEUE *NbufQue,\r
+ IN OUT NET_BUF_QUEUE *NbufQue,\r
IN UINT32 Len\r
);\r
\r
/**\r
Flush the net buffer queue.\r
\r
- @param NbufQue Pointer to the queue to be flushed.\r
-\r
- @return None.\r
+ @param[in, out] NbufQue The pointer to the queue to be flushed.\r
\r
**/\r
VOID\r
EFIAPI\r
NetbufQueFlush (\r
- IN NET_BUF_QUEUE *NbufQue\r
+ IN OUT NET_BUF_QUEUE *NbufQue\r
);\r
\r
/**\r
- Compute checksum for a bulk of data.\r
+ Compute the checksum for a bulk of data.\r
\r
- @param Bulk Pointer to the data.\r
- @param Len Length of the data, in bytes.\r
+ @param[in] Bulk The pointer to the data.\r
+ @param[in] Len The length of the data, in bytes.\r
\r
- @retval UINT16 The computed checksum.\r
+ @return The computed checksum.\r
\r
**/\r
UINT16\r
/**\r
Add two checksums.\r
\r
- @param Checksum1 The first checksum to be added.\r
- @param Checksum2 The second checksum to be added.\r
+ @param[in] Checksum1 The first checksum to be added.\r
+ @param[in] Checksum2 The second checksum to be added.\r
\r
- @retval UINT16 The new checksum.\r
+ @return The new checksum.\r
\r
**/\r
UINT16\r
/**\r
Compute the checksum for a NET_BUF.\r
\r
- @param Nbuf Pointer to the net buffer.\r
+ @param[in] Nbuf The pointer to the net buffer.\r
\r
- @retval UINT16 The computed checksum.\r
+ @return The computed checksum.\r
\r
**/\r
UINT16\r
\r
/**\r
Compute the checksum for TCP/UDP pseudo header.\r
- Src, Dst are in network byte order. and Len is\r
- in host byte order.\r
\r
- @param Src The source address of the packet.\r
- @param Dst The destination address of the packet.\r
- @param Proto The protocol type of the packet.\r
- @param Len The length of the packet.\r
+ Src and Dst are in network byte order, and Len is in host byte order.\r
+\r
+ @param[in] Src The source address of the packet.\r
+ @param[in] Dst The destination address of the packet.\r
+ @param[in] Proto The protocol type of the packet.\r
+ @param[in] Len The length of the packet.\r
\r
- @retval UINT16 The computed checksum.\r
+ @return The computed checksum.\r
\r
**/\r
UINT16\r
IN UINT16 Len\r
);\r
\r
+/**\r
+ Compute the checksum for the TCP6/UDP6 pseudo header.\r
+\r
+ Src and Dst are in network byte order, and Len is in host byte order.\r
+\r
+ @param[in] Src The source address of the packet.\r
+ @param[in] Dst The destination address of the packet.\r
+ @param[in] NextHeader The protocol type of the packet.\r
+ @param[in] Len The length of the packet.\r
+\r
+ @return The computed checksum.\r
+\r
+**/\r
+UINT16\r
+EFIAPI\r
+NetIp6PseudoHeadChecksum (\r
+ IN EFI_IPv6_ADDRESS *Src,\r
+ IN EFI_IPv6_ADDRESS *Dst,\r
+ IN UINT8 NextHeader,\r
+ IN UINT32 Len\r
+ );\r
+\r
+/**\r
+ The function frees the net buffer which allocated by the IP protocol. It releases \r
+ only the net buffer and doesn't call the external free function. \r
+\r
+ This function should be called after finishing the process of mIpSec->ProcessExt() \r
+ for outbound traffic. The (EFI_IPSEC2_PROTOCOL)->ProcessExt() allocates a new \r
+ buffer for the ESP, so there needs a function to free the old net buffer.\r
+\r
+ @param[in] Nbuf The network buffer to be freed.\r
+\r
+**/\r
+VOID\r
+NetIpSecNetbufFree (\r
+ NET_BUF *Nbuf\r
+ );\r
+\r
+/**\r
+ This function obtains the system guid from the smbios table.\r
+\r
+ @param[out] SystemGuid The pointer of the returned system guid.\r
+\r
+ @retval EFI_SUCCESS Successfully obtained the system guid.\r
+ @retval EFI_NOT_FOUND Did not find the SMBIOS table.\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+NetLibGetSystemGuid (\r
+ OUT EFI_GUID *SystemGuid\r
+ );\r
+\r
#endif\r