/** @file\r
Network library.\r
\r
-Copyright (c) 2005 - 2010, Intel Corporation.<BR>\r
-All rights reserved. This program and the accompanying materials\r
+Copyright (c) 2005 - 2010, Intel Corporation. All rights reserved.<BR>\r
+This program and the accompanying materials\r
are licensed and made available under the terms and conditions of the BSD License\r
which accompanies this distribution. The full text of the license may be found at\r
http://opensource.org/licenses/bsd-license.php\r
\r
**/\r
CHAR8 *\r
+EFIAPI\r
NetDebugASPrint (\r
IN CHAR8 *Format,\r
...\r
than the mNetDebugLevelMax. Or, it has been sent out.\r
**/\r
EFI_STATUS\r
+EFIAPI\r
NetDebugOutput (\r
IN UINT32 Level,\r
IN UINT8 *Module,\r
\r
**/\r
BOOLEAN\r
+EFIAPI\r
NetIp6IsValidUnicast (\r
IN EFI_IPv6_ADDRESS *Ip6\r
)\r
\r
**/\r
BOOLEAN\r
+EFIAPI\r
NetIp6IsUnspecifiedAddr (\r
IN EFI_IPv6_ADDRESS *Ip6\r
)\r
\r
**/\r
BOOLEAN\r
+EFIAPI\r
NetIp6IsLinkLocalAddr (\r
IN EFI_IPv6_ADDRESS *Ip6\r
)\r
\r
**/\r
BOOLEAN\r
+EFIAPI\r
NetIp6IsNetEqual (\r
EFI_IPv6_ADDRESS *Ip1,\r
EFI_IPv6_ADDRESS *Ip2,\r
\r
**/\r
EFI_IPv6_ADDRESS *\r
+EFIAPI\r
Ip6Swap128 (\r
EFI_IPv6_ADDRESS *Ip6\r
)\r
byte stream.\r
\r
@param[in, out] Buf The buffer to put the UINT32.\r
- @param[in] Data The data to put.\r
+ @param[in] Data The data to be converted and put into the byte stream.\r
\r
**/\r
VOID\r
return EFI_SUCCESS;\r
}\r
\r
+/**\r
+ Detect media status for specified network device.\r
+\r
+ The underlying UNDI driver may or may not support reporting media status from\r
+ GET_STATUS command (PXE_STATFLAGS_GET_STATUS_NO_MEDIA_SUPPORTED). This routine\r
+ will try to invoke Snp->GetStatus() to get the media status: if media already\r
+ present, it return directly; if media not present, it will stop SNP and then\r
+ restart SNP to get the latest media status, this give chance to get the correct\r
+ media status for old UNDI driver which doesn't support reporting media status\r
+ from GET_STATUS command.\r
+ Note: there will be two limitations for current algorithm:\r
+ 1) for UNDI with this capability, in case of cable is not attached, there will\r
+ be an redundant Stop/Start() process;\r
+ 2) for UNDI without this capability, in case that network cable is attached when\r
+ Snp->Initialize() is invoked while network cable is unattached later,\r
+ NetLibDetectMedia() will report MediaPresent as TRUE, causing upper layer\r
+ apps to wait for timeout time.\r
+\r
+ @param[in] ServiceHandle The handle where network service binding protocols are\r
+ installed on.\r
+ @param[out] MediaPresent The pointer to store the media status.\r
+\r
+ @retval EFI_SUCCESS Media detection success.\r
+ @retval EFI_INVALID_PARAMETER ServiceHandle is not valid network device handle.\r
+ @retval EFI_UNSUPPORTED Network device does not support media detection.\r
+ @retval EFI_DEVICE_ERROR SNP is in unknown state.\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+NetLibDetectMedia (\r
+ IN EFI_HANDLE ServiceHandle,\r
+ OUT BOOLEAN *MediaPresent\r
+ )\r
+{\r
+ EFI_STATUS Status;\r
+ EFI_HANDLE SnpHandle;\r
+ EFI_SIMPLE_NETWORK_PROTOCOL *Snp;\r
+ UINT32 InterruptStatus;\r
+ UINT32 OldState;\r
+ EFI_MAC_ADDRESS *MCastFilter;\r
+ UINT32 MCastFilterCount;\r
+ UINT32 EnableFilterBits;\r
+ UINT32 DisableFilterBits;\r
+ BOOLEAN ResetMCastFilters;\r
+\r
+ ASSERT (MediaPresent != NULL);\r
+\r
+ //\r
+ // Get SNP handle\r
+ //\r
+ Snp = NULL;\r
+ SnpHandle = NetLibGetSnpHandle (ServiceHandle, &Snp);\r
+ if (SnpHandle == NULL) {\r
+ return EFI_INVALID_PARAMETER;\r
+ }\r
+\r
+ //\r
+ // Check whether SNP support media detection\r
+ //\r
+ if (!Snp->Mode->MediaPresentSupported) {\r
+ return EFI_UNSUPPORTED;\r
+ }\r
+\r
+ //\r
+ // Invoke Snp->GetStatus() to refresh MediaPresent field in SNP mode data\r
+ //\r
+ Status = Snp->GetStatus (Snp, &InterruptStatus, NULL);\r
+ if (EFI_ERROR (Status)) {\r
+ return Status;\r
+ }\r
+\r
+ if (Snp->Mode->MediaPresent) {\r
+ //\r
+ // Media is present, return directly\r
+ //\r
+ *MediaPresent = TRUE;\r
+ return EFI_SUCCESS;\r
+ }\r
+\r
+ //\r
+ // Till now, GetStatus() report no media; while, in case UNDI not support\r
+ // reporting media status from GetStatus(), this media status may be incorrect.\r
+ // So, we will stop SNP and then restart it to get the correct media status.\r
+ //\r
+ OldState = Snp->Mode->State;\r
+ if (OldState >= EfiSimpleNetworkMaxState) {\r
+ return EFI_DEVICE_ERROR;\r
+ }\r
+\r
+ MCastFilter = NULL;\r
+\r
+ if (OldState == EfiSimpleNetworkInitialized) {\r
+ //\r
+ // SNP is already in use, need Shutdown/Stop and then Start/Initialize\r
+ //\r
+\r
+ //\r
+ // Backup current SNP receive filter settings\r
+ //\r
+ EnableFilterBits = Snp->Mode->ReceiveFilterSetting;\r
+ DisableFilterBits = Snp->Mode->ReceiveFilterMask ^ EnableFilterBits;\r
+\r
+ ResetMCastFilters = TRUE;\r
+ MCastFilterCount = Snp->Mode->MCastFilterCount;\r
+ if (MCastFilterCount != 0) {\r
+ MCastFilter = AllocateCopyPool (\r
+ MCastFilterCount * sizeof (EFI_MAC_ADDRESS),\r
+ Snp->Mode->MCastFilter\r
+ );\r
+ ASSERT (MCastFilter != NULL);\r
+\r
+ ResetMCastFilters = FALSE;\r
+ }\r
+\r
+ //\r
+ // Shutdown/Stop the simple network\r
+ //\r
+ Status = Snp->Shutdown (Snp);\r
+ if (!EFI_ERROR (Status)) {\r
+ Status = Snp->Stop (Snp);\r
+ }\r
+ if (EFI_ERROR (Status)) {\r
+ goto Exit;\r
+ }\r
+\r
+ //\r
+ // Start/Initialize the simple network\r
+ //\r
+ Status = Snp->Start (Snp);\r
+ if (!EFI_ERROR (Status)) {\r
+ Status = Snp->Initialize (Snp, 0, 0);\r
+ }\r
+ if (EFI_ERROR (Status)) {\r
+ goto Exit;\r
+ }\r
+\r
+ //\r
+ // Here we get the correct media status\r
+ //\r
+ *MediaPresent = Snp->Mode->MediaPresent;\r
+\r
+ //\r
+ // Restore SNP receive filter settings\r
+ //\r
+ Status = Snp->ReceiveFilters (\r
+ Snp,\r
+ EnableFilterBits,\r
+ DisableFilterBits,\r
+ ResetMCastFilters,\r
+ MCastFilterCount,\r
+ MCastFilter\r
+ );\r
+\r
+ if (MCastFilter != NULL) {\r
+ FreePool (MCastFilter);\r
+ }\r
+\r
+ return Status;\r
+ }\r
+\r
+ //\r
+ // SNP is not in use, it's in state of EfiSimpleNetworkStopped or EfiSimpleNetworkStarted\r
+ //\r
+ if (OldState == EfiSimpleNetworkStopped) {\r
+ //\r
+ // SNP not start yet, start it\r
+ //\r
+ Status = Snp->Start (Snp);\r
+ if (EFI_ERROR (Status)) {\r
+ goto Exit;\r
+ }\r
+ }\r
+\r
+ //\r
+ // Initialize the simple network\r
+ //\r
+ Status = Snp->Initialize (Snp, 0, 0);\r
+ if (EFI_ERROR (Status)) {\r
+ Status = EFI_DEVICE_ERROR;\r
+ goto Exit;\r
+ }\r
+\r
+ //\r
+ // Here we get the correct media status\r
+ //\r
+ *MediaPresent = Snp->Mode->MediaPresent;\r
+\r
+ //\r
+ // Shut down the simple network\r
+ //\r
+ Snp->Shutdown (Snp);\r
+\r
+Exit:\r
+ if (OldState == EfiSimpleNetworkStopped) {\r
+ //\r
+ // Original SNP sate is Stopped, restore to original state\r
+ //\r
+ Snp->Stop (Snp);\r
+ }\r
+\r
+ if (MCastFilter != NULL) {\r
+ FreePool (MCastFilter);\r
+ }\r
+\r
+ return Status;\r
+}\r
+\r
/**\r
Check the default address used by the IPv4 driver is static or dynamic (acquired\r
from DHCP).\r
@param[in] String The pointer to the Ascii string.\r
@param[out] Ip4Address The pointer to the converted IPv4 address.\r
\r
- @retval EFI_SUCCESS Convert to IPv4 address successfully. \r
+ @retval EFI_SUCCESS Convert to IPv4 address successfully.\r
@retval EFI_INVALID_PARAMETER The string is mal-formated or Ip4Address is NULL.\r
\r
**/\r
EFI_STATUS\r
+EFIAPI\r
NetLibAsciiStrToIp4 (\r
IN CONST CHAR8 *String,\r
OUT EFI_IPv4_ADDRESS *Ip4Address\r
\r
//\r
// Convert the string to IPv4 address. AsciiStrDecimalToUintn stops at the\r
- // first character that is not a valid decimal character, '.' or '\0' here. \r
+ // first character that is not a valid decimal character, '.' or '\0' here.\r
//\r
NodeVal = AsciiStrDecimalToUintn (TempStr);\r
if (NodeVal > 0xFF) {\r
@param[in] String The pointer to the Ascii string.\r
@param[out] Ip6Address The pointer to the converted IPv6 address.\r
\r
- @retval EFI_SUCCESS Convert to IPv6 address successfully. \r
+ @retval EFI_SUCCESS Convert to IPv6 address successfully.\r
@retval EFI_INVALID_PARAMETER The string is mal-formated or Ip6Address is NULL.\r
\r
**/\r
EFI_STATUS\r
+EFIAPI\r
NetLibAsciiStrToIp6 (\r
IN CONST CHAR8 *String,\r
OUT EFI_IPv6_ADDRESS *Ip6Address\r
return EFI_INVALID_PARAMETER;\r
} else {\r
AllowedCnt = 7;\r
- } \r
+ }\r
}\r
\r
ZeroMem (Ip6Address, sizeof (EFI_IPv6_ADDRESS));\r
// ::0 looks strange. report error to user.\r
//\r
return EFI_INVALID_PARAMETER;\r
- } \r
+ }\r
\r
//\r
// Skip the abbreviation part of IPv6 address.\r
//\r
return EFI_INVALID_PARAMETER;\r
}\r
- \r
+\r
TailNodeCnt++;\r
if (TailNodeCnt >= (AllowedCnt - NodeCnt)) {\r
//\r
}\r
\r
TempStr2++;\r
- } \r
+ }\r
\r
Short = TRUE;\r
Update = TRUE;\r
//\r
return EFI_INVALID_PARAMETER;\r
}\r
- } \r
- } \r
+ }\r
+ }\r
\r
//\r
// Convert the string to IPv6 address. AsciiStrHexToUintn stops at the first\r
- // character that is not a valid hexadecimal character, ':' or '\0' here. \r
+ // character that is not a valid hexadecimal character, ':' or '\0' here.\r
//\r
NodeVal = AsciiStrHexToUintn (TempStr);\r
if ((NodeVal > 0xFFFF) || (Index > 14)) {\r
@param[in] String The pointer to the Ascii string.\r
@param[out] Ip4Address The pointer to the converted IPv4 address.\r
\r
- @retval EFI_SUCCESS Convert to IPv4 address successfully. \r
+ @retval EFI_SUCCESS Convert to IPv4 address successfully.\r
@retval EFI_INVALID_PARAMETER The string is mal-formated or Ip4Address is NULL.\r
@retval EFI_OUT_OF_RESOURCES Fail to perform the operation due to lack of resource.\r
\r
**/\r
EFI_STATUS\r
+EFIAPI\r
NetLibStrToIp4 (\r
IN CONST CHAR16 *String,\r
OUT EFI_IPv4_ADDRESS *Ip4Address\r
{\r
CHAR8 *Ip4Str;\r
EFI_STATUS Status;\r
- \r
+\r
if ((String == NULL) || (Ip4Address == NULL)) {\r
return EFI_INVALID_PARAMETER;\r
}\r
@param[in] String The pointer to the Ascii string.\r
@param[out] Ip6Address The pointer to the converted IPv6 address.\r
\r
- @retval EFI_SUCCESS Convert to IPv6 address successfully. \r
+ @retval EFI_SUCCESS Convert to IPv6 address successfully.\r
@retval EFI_INVALID_PARAMETER The string is mal-formated or Ip6Address is NULL.\r
@retval EFI_OUT_OF_RESOURCES Fail to perform the operation due to lack of resource.\r
\r
**/\r
EFI_STATUS\r
+EFIAPI\r
NetLibStrToIp6 (\r
IN CONST CHAR16 *String,\r
OUT EFI_IPv6_ADDRESS *Ip6Address\r
- ) \r
+ )\r
{\r
CHAR8 *Ip6Str;\r
EFI_STATUS Status;\r
- \r
+\r
if ((String == NULL) || (Ip6Address == NULL)) {\r
return EFI_INVALID_PARAMETER;\r
}\r
@param[out] Ip6Address The pointer to the converted IPv6 address.\r
@param[out] PrefixLength The pointer to the converted prefix length.\r
\r
- @retval EFI_SUCCESS Convert to IPv6 address successfully. \r
+ @retval EFI_SUCCESS Convert to IPv6 address successfully.\r
@retval EFI_INVALID_PARAMETER The string is mal-formated or Ip6Address is NULL.\r
@retval EFI_OUT_OF_RESOURCES Fail to perform the operation due to lack of resource.\r
\r
**/\r
EFI_STATUS\r
+EFIAPI\r
NetLibStrToIp6andPrefix (\r
IN CONST CHAR16 *String,\r
OUT EFI_IPv6_ADDRESS *Ip6Address,\r
OUT UINT8 *PrefixLength\r
- ) \r
+ )\r
{\r
- CHAR8 *Ip6Str; \r
+ CHAR8 *Ip6Str;\r
CHAR8 *PrefixStr;\r
CHAR8 *TempStr;\r
EFI_STATUS Status;\r
UINT8 Length;\r
- \r
+\r
if ((String == NULL) || (Ip6Address == NULL) || (PrefixLength == NULL)) {\r
return EFI_INVALID_PARAMETER;\r
}\r