/** @file\r
Misc library functions.\r
\r
-Copyright (c) 2011 - 2015, Intel Corporation. All rights reserved.<BR>\r
+Copyright (c) 2011 - 2017, Intel Corporation. All rights reserved.<BR>\r
+(C) Copyright 2016 Hewlett Packard Enterprise Development LP<BR>\r
This program and the accompanying materials\r
are licensed and made available under the terms and conditions of the BSD License\r
which accompanies this distribution. The full text of the license may be found at\r
This routine adjust the memory information for different memory type and \r
save them into the variables for next boot. It resets the system when\r
memory information is updated and the current boot option belongs to\r
- boot category instead of application category.\r
+ boot category instead of application category. It doesn't count the\r
+ reserved memory occupied by RAM Disk.\r
\r
- @param Boot TRUE if current boot option belongs to boot category instead of\r
- application category.\r
+ @param Boot TRUE if current boot option belongs to boot\r
+ category instead of application category.\r
**/\r
VOID\r
BmSetMemoryTypeInformationVariable (\r
//\r
return;\r
}\r
- PreviousMemoryTypeInformation = GET_GUID_HOB_DATA (GuidHob);\r
- VariableSize = GET_GUID_HOB_DATA_SIZE (GuidHob);\r
+ VariableSize = GET_GUID_HOB_DATA_SIZE (GuidHob);\r
+ PreviousMemoryTypeInformation = AllocateCopyPool (VariableSize, GET_GUID_HOB_DATA (GuidHob));\r
+ if (PreviousMemoryTypeInformation == NULL) {\r
+ return;\r
+ }\r
\r
//\r
// Use a heuristic to adjust the Memory Type Information for the next boot\r
// then reset the platform so the new Memory Type Information setting will be used to guarantee that an S4\r
// entry/resume cycle will not fail.\r
//\r
- if (MemoryTypeInformationModified && Boot && PcdGetBool (PcdResetOnMemoryTypeInformationChange)) {\r
- DEBUG ((EFI_D_INFO, "Memory Type Information settings change. Warm Reset!!!\n"));\r
- gRT->ResetSystem (EfiResetWarm, EFI_SUCCESS, 0, NULL);\r
+ if (MemoryTypeInformationModified) {\r
+ DEBUG ((EFI_D_INFO, "Memory Type Information settings change.\n"));\r
+ if (Boot && PcdGetBool (PcdResetOnMemoryTypeInformationChange)) {\r
+ DEBUG ((EFI_D_INFO, "...Warm Reset!!!\n"));\r
+ gRT->ResetSystem (EfiResetWarm, EFI_SUCCESS, 0, NULL);\r
+ }\r
}\r
} else {\r
DEBUG ((EFI_D_ERROR, "Memory Type Information settings cannot be saved. OS S4 may fail!\n"));\r
}\r
}\r
+ FreePool (PreviousMemoryTypeInformation);\r
}\r
\r
/**\r
@param VendorGuid A unique identifier for the vendor.\r
@param Attributes Attributes bitmask to set for the variable.\r
@param DataSize The size in bytes of the Data buffer. Unless the EFI_VARIABLE_APPEND_WRITE, \r
- EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS, or \r
- EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACCESS attribute is set, a size of zero \r
+ or EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACCESS attribute is set, a size of zero\r
causes the variable to be deleted. When the EFI_VARIABLE_APPEND_WRITE attribute is \r
set, then a SetVariable() call with a DataSize of zero will not cause any change to \r
the variable value (the timestamp associated with the variable may be updated however \r
@retval EFI_DEVICE_ERROR The variable could not be retrieved due to a hardware error.\r
@retval EFI_WRITE_PROTECTED The variable in question is read-only.\r
@retval EFI_WRITE_PROTECTED The variable in question cannot be deleted.\r
- @retval EFI_SECURITY_VIOLATION The variable could not be written due to EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS \r
- or EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACESS being set, but the AuthInfo \r
- does NOT pass the validation check carried out by the firmware.\r
+ @retval EFI_SECURITY_VIOLATION The variable could not be written due to EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACESS\r
+ being set, but the AuthInfo does NOT pass the validation check carried out by the firmware.\r
\r
@retval EFI_NOT_FOUND The variable trying to be updated or deleted was not found.\r
**/\r
)\r
{\r
if ((Char >= L'0') && (Char <= L'9')) {\r
- return (UINTN) (Char - L'0');\r
+ return (Char - L'0');\r
}\r
\r
if ((Char >= L'A') && (Char <= L'F')) {\r
- return (UINTN) (Char - L'A' + 0xA);\r
+ return (Char - L'A' + 0xA);\r
}\r
\r
- ASSERT (FALSE);\r
return (UINTN) -1;\r
}\r
\r
+/**\r
+ Dispatch the deferred images that are returned from all DeferredImageLoad instances.\r
+\r
+ @retval EFI_SUCCESS At least one deferred image is loaded successfully and started.\r
+ @retval EFI_NOT_FOUND There is no deferred image.\r
+ @retval EFI_ACCESS_DENIED There are deferred images but all of them are failed to load.\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+EfiBootManagerDispatchDeferredImages (\r
+ VOID\r
+ )\r
+{\r
+ EFI_STATUS Status;\r
+ EFI_DEFERRED_IMAGE_LOAD_PROTOCOL *DeferredImage;\r
+ UINTN HandleCount;\r
+ EFI_HANDLE *Handles;\r
+ UINTN Index;\r
+ UINTN ImageIndex;\r
+ EFI_DEVICE_PATH_PROTOCOL *ImageDevicePath;\r
+ VOID *Image;\r
+ UINTN ImageSize;\r
+ BOOLEAN BootOption;\r
+ EFI_HANDLE ImageHandle;\r
+ UINTN ExitDataSize;\r
+ CHAR16 *ExitData;\r
+ UINTN ImageCount;\r
+ UINTN LoadCount;\r
+\r
+ //\r
+ // Find all the deferred image load protocols.\r
+ //\r
+ HandleCount = 0;\r
+ Handles = NULL;\r
+ Status = gBS->LocateHandleBuffer (\r
+ ByProtocol,\r
+ &gEfiDeferredImageLoadProtocolGuid,\r
+ NULL,\r
+ &HandleCount,\r
+ &Handles\r
+ );\r
+ if (EFI_ERROR (Status)) {\r
+ return EFI_NOT_FOUND;\r
+ }\r
+\r
+ ImageCount = 0;\r
+ LoadCount = 0;\r
+ for (Index = 0; Index < HandleCount; Index++) {\r
+ Status = gBS->HandleProtocol (Handles[Index], &gEfiDeferredImageLoadProtocolGuid, (VOID **) &DeferredImage);\r
+ if (EFI_ERROR (Status)) {\r
+ continue;\r
+ }\r
+\r
+ for (ImageIndex = 0; ;ImageIndex++) {\r
+ //\r
+ // Load all the deferred images in this protocol instance.\r
+ //\r
+ Status = DeferredImage->GetImageInfo (\r
+ DeferredImage,\r
+ ImageIndex,\r
+ &ImageDevicePath,\r
+ (VOID **) &Image,\r
+ &ImageSize,\r
+ &BootOption\r
+ );\r
+ if (EFI_ERROR (Status)) {\r
+ break;\r
+ }\r
+ ImageCount++;\r
+ //\r
+ // Load and start the image.\r
+ //\r
+ Status = gBS->LoadImage (\r
+ BootOption,\r
+ gImageHandle,\r
+ ImageDevicePath,\r
+ NULL,\r
+ 0,\r
+ &ImageHandle\r
+ );\r
+ if (!EFI_ERROR (Status)) {\r
+ LoadCount++;\r
+ //\r
+ // Before calling the image, enable the Watchdog Timer for\r
+ // a 5 Minute period\r
+ //\r
+ gBS->SetWatchdogTimer (5 * 60, 0x0000, 0x00, NULL);\r
+ Status = gBS->StartImage (ImageHandle, &ExitDataSize, &ExitData);\r
+ if (ExitData != NULL) {\r
+ FreePool (ExitData);\r
+ }\r
+\r
+ //\r
+ // Clear the Watchdog Timer after the image returns.\r
+ //\r
+ gBS->SetWatchdogTimer (0x0000, 0x0000, 0x0000, NULL);\r
+ }\r
+ }\r
+ }\r
+ if (Handles != NULL) {\r
+ FreePool (Handles);\r
+ }\r
+\r
+ if (ImageCount == 0) {\r
+ return EFI_NOT_FOUND;\r
+ } else {\r
+ if (LoadCount == 0) {\r
+ return EFI_ACCESS_DENIED;\r
+ } else {\r
+ return EFI_SUCCESS;\r
+ }\r
+ }\r
+}\r
projects / mirror_edk2.git / blobdiff