## @file MdeModulePkg.dec\r
#\r
# This package provides the modules that conform to EFI/PI Industry standards.\r
-# It also provides the defintions(including PPIs/PROTOCOLs/GUIDs and library classes) \r
+# It also provides the defintions(including PPIs/PROTOCOLs/GUIDs and library classes)\r
# and libraries instances, which are used for those modules.\r
#\r
# Copyright (c) 2007 - 2009, Intel Corporation.\r
DEC_SPECIFICATION = 0x00010005\r
PACKAGE_NAME = MdeModulePkg\r
PACKAGE_GUID = BA0D78D6-2CAF-414b-BD4D-B6762A894288\r
- PACKAGE_VERSION = 0.1\r
+ PACKAGE_VERSION = 0.90\r
\r
[Includes.common]\r
Include\r
## @libraryclass IpIo layer upon EFI IP4 Protocol.\r
# This library is only intended to be used by UEFI network stack modules.\r
IpIoLib|Include/Library/IpIoLib.h\r
- \r
+\r
## @libraryclass Basic function for UEFI network stack.\r
# This library is only intended to be used by UEFI network stack modules.\r
NetLib|Include/Library/NetLib.h\r
- \r
+\r
## @libraryclass The helper routines to access UDP service.\r
# This library is only intended to be used by UEFI network stack modules.\r
UdpIoLib|Include/Library/UdpIoLib.h\r
- \r
+\r
## @libraryclass Defines a set of methods to reset whole system.\r
ResetSystemLib|Include/Library/ResetSystemLib.h\r
\r
## @libraryclass Defines a set of methods related do S3 mode.\r
S3Lib|Include/Library/S3Lib.h\r
- \r
+\r
## @libraryclass Defines a set of methods related recovery mode.\r
RecoveryLib|Include/Library/RecoveryLib.h\r
- \r
- ## @libraryclass Basic platform driver override functions.\r
- # This library is only intended to be used by Platform Driver Override Dxe Driver and Application.\r
- PlatformDriverOverrideLib|Include/Library/PlatformDriverOverrideLib.h\r
\r
## @libraryclass Provides HII related functions.\r
HiiLib|Include/Library/HiiLib.h\r
\r
- ## @libraryclass Provides a set of interfaces to do IFR opcode creation and interact with a UEFI Form Browser.\r
- IfrSupportLib|Include/Library/IfrSupportLib.h\r
- \r
- ## @libraryclass Defines APIs that is related to IFR operations but specific to EDK II\r
- # implementation.\r
- ##\r
- ExtendedIfrSupportLib|Include/Library/ExtendedIfrSupportLib.h\r
- \r
## @libraryclass Defines a set of interfaces on how to process capusle image update.\r
CapsuleLib|Include/Library/CapsuleLib.h\r
- \r
+\r
## @libraryclass Library for Deferred Procedure Calls.\r
DpcLib|Include/Library/DpcLib.h\r
\r
- ## @libraryclass Provides APIs for system memory test.\r
+ ## @libraryclass Provides global variables that are pointers\r
+ ## to the UEFI HII related protocols.\r
##\r
- MemoryTestLib|Include/Library/MemoryTestLib.h\r
+ UefiHiiServicesLib|Include/Library/UefiHiiServicesLib.h\r
\r
[Guids.common]\r
## MdeModule package token space guid\r
## Hob guid for Pcd DataBase\r
## Include/Guid/PcdDataBaseHobGuid.h\r
gPcdDataBaseHobGuid = { 0xEA296D92, 0x0B69, 0x423C, { 0x8C, 0x28, 0x33, 0xB4, 0xE0, 0xA9, 0x12, 0x68 }}\r
- \r
+\r
## Guid for EDKII implementation GUIDed opcodes\r
# Include/Guid/MdeModuleHii.h\r
gEfiIfrTianoGuid = { 0xf0b1735, 0x87a0, 0x4193, {0xb2, 0x66, 0x53, 0x8c, 0x38, 0xaf, 0x48, 0xce }}\r
- \r
+\r
## Guid for Framework vfr GUIDed opcodes.\r
# Include/Guid/MdeModuleHii.h\r
gEfiIfrFrameworkGuid = { 0x31ca5d1a, 0xd511, 0x4931, { 0xb7, 0x82, 0xae, 0x6b, 0x2b, 0x17, 0x8c, 0xd7 }}\r
- \r
+\r
## Guid to specify the System Non Volatile FV\r
## Include/Guid/SystemNvDataGuid.h\r
gEfiSystemNvDataFvGuid = { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}\r
- \r
+\r
## Guid specify the device is the console out device.\r
## Include/Guid/ConsoleOutDevice.h\r
gEfiConsoleOutDeviceGuid = { 0xD3B36F2C, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}\r
## Guid specify the device is the console in device.\r
## Include/Guid/ConsoleInDevice.h\r
gEfiConsoleInDeviceGuid = { 0xD3B36F2B, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}\r
- \r
+\r
## Hob and Variable guid specify the platform memory type information.\r
## Include/Guid/MemoryTypeInformation.h\r
gEfiMemoryTypeInformationGuid = { 0x4C19049F, 0x4137, 0x4DD3, { 0x9C, 0x10, 0x8B, 0x97, 0xA8, 0x3F, 0xFD, 0xFA }}\r
- \r
+\r
## Capsule update hob and variable guid\r
## Include/Guid/CapsuleVendor.h\r
gEfiCapsuleVendorGuid = { 0x711C703F, 0xC285, 0x4B10, { 0xA3, 0xB0, 0x36, 0xEC, 0xBD, 0x3C, 0x8B, 0xE2 }}\r
- \r
+\r
## Guid specifiy the device is the StdErr device.\r
## Include/Guid/StandardErrorDevice.h\r
gEfiStandardErrorDeviceGuid = { 0xD3B36F2D, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}\r
- \r
+\r
## Guid acted as variable store header's signature and to specify the variable list entries put in the EFI system table.\r
## Include/Guid/VariableFormat.h\r
gEfiVariableGuid = { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}\r
- \r
- ## Platform Override Variable guid\r
- ## Include/Guid/OverrideVariable.h\r
- gEfiOverrideVariableGuid = { 0x8e3d4ad5, 0xf762, 0x438a, { 0xa1, 0xc1, 0x5b, 0x9f, 0xe6, 0x8c, 0x6b, 0x15 }}\r
- \r
+\r
## Performance protocol guid that also acts as the performance HOB guid and performance variable GUID\r
## Include/Guid/Performance.h\r
gPerformanceProtocolGuid = { 0x76B6BDFA, 0x2ACD, 0x4462, { 0x9E, 0x3F, 0xCB, 0x58, 0xC9, 0x69, 0xD9, 0x37 }}\r
## Include/Guid/Crc32GuidedSectionExtraction.h\r
gEfiCrc32GuidedSectionExtractionGuid = { 0xFC1BCDB0, 0x7D31, 0x49aa, {0x93, 0x6A, 0xA4, 0x60, 0x0D, 0x9D, 0xD0, 0x83 } }\r
\r
-[Protocols.common] \r
+ ## Include/Guid/NicIp4ConfigNvData.h\r
+ gEfiNicIp4ConfigVariableGuid = {0xd8944553, 0xc4dd, 0x41f4, { 0x9b, 0x30, 0xe1, 0x39, 0x7c, 0xfb, 0x26, 0x7b }}\r
+\r
+[Protocols.common]\r
## Load File protocol provides capability to load and unload EFI image into memory and execute it.\r
## Include/Protocol/LoadPe32Image.h\r
+ ## This protocol is deprecated. Native EDKII module should NOT use this protocol to load/unload image.\r
+ ## If developer need implement such functionality, they should use BasePeCoffLib.\r
gEfiLoadPeImageProtocolGuid = { 0x5CB5C776, 0x60D5, 0x45EE, { 0x88, 0x3C, 0x45, 0x27, 0x08, 0xCD, 0x74, 0x3F }}\r
- \r
- ## Print protocol defines six basic print functions to print the format unicode and ascii string.\r
+\r
+ ## Print protocol defines basic print functions to print the format unicode and ascii string.\r
## Include/Protocol/Print2.h\r
- gEfiPrint2ProtocolGuid = { 0x5bcc3dbc, 0x8c57, 0x450a, { 0xbb, 0x0c, 0xa1, 0xc0, 0xbd, 0xde, 0x48, 0x0c }}\r
+ gEfiPrint2ProtocolGuid = { 0xf05976ef, 0x83f1, 0x4f3d, { 0x86, 0x19, 0xf7, 0x59, 0x5d, 0x41, 0xe5, 0x38 } }\r
\r
## This protocol defines the generic memory test interfaces in Dxe phase.\r
## Include/Protocol/GenericMemoryTest.h\r
gEfiGenericMemTestProtocolGuid = { 0x309DE7F1, 0x7F5E, 0x4ACE, { 0xB4, 0x9C, 0x53, 0x1B, 0xE5, 0xAA, 0x95, 0xEF }}\r
- \r
- ## Include/Protocol/NicIp4Config.h\r
- gEfiNicIp4ConfigProtocolGuid = {0xdca3d4d, 0x12da, 0x4728, { 0xbf, 0x7e, 0x86, 0xce, 0xb9, 0x28, 0xd0, 0x67 }}\r
- \r
- ## Include/Protocol/NicIp4Config.h\r
- gEfiNicIp4ConfigVariableGuid = {0xd8944553, 0xc4dd, 0x41f4, { 0x9b, 0x30, 0xe1, 0x39, 0x7c, 0xfb, 0x26, 0x7b }}\r
- \r
+\r
## Include/Protocol/Dpc.h\r
gEfiDpcProtocolGuid = {0x480f8ae9, 0xc46, 0x4aa9, { 0xbc, 0x89, 0xdb, 0x9f, 0xba, 0x61, 0x98, 0x6 }}\r
- \r
+\r
## Fault Tolerant Write protocol provides boot-time service to do fault tolerant write capability for block devices.\r
# Include/Protocol/FaultTolerantWrite.h\r
gEfiFaultTolerantWriteProtocolGuid = { 0x3EBD9E82, 0x2C78, 0x4DE6, { 0x97, 0x86, 0x8D, 0x4B, 0xFC, 0xB7, 0xC8, 0x81 }}\r
- \r
+\r
## This protocol is used to abstract the swap operation of boot block and backup block of boot FV.\r
# Include/Protocol/SwapAddressRange.h\r
gEfiSwapAddressRangeProtocolGuid = { 0x1259F60D, 0xB754, 0x468E, { 0xA7, 0x89, 0x4D, 0xB8, 0x5D, 0x55, 0xE8, 0x7E }}\r
- \r
+\r
[PcdsFeatureFlag]\r
## Indicate whether platform can support update capsule across a system reset\r
gEfiMdeModulePkgTokenSpaceGuid.PcdSupportUpdateCapsuleReset|FALSE|BOOLEAN|0x0001001d\r
- \r
+\r
## This feature flag can be used to enable or disable all PCD PEIM services.\r
# If TRUE, all PCD PPI services will be produced.\r
## If FALSE, the minimal PCD PEIM services (only GetService) will be produced.\r
## If TRUE, then the Device Path To Text Protocol should be produced by the platform.\r
# It can be disabled to save size.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathToText|TRUE|BOOLEAN|0x00010037\r
- \r
+\r
## If TRUE, then the Device Path From Text Protocol should be produced by the platform.\r
# It can be disabled to save size.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathFromText|TRUE|BOOLEAN|0x00010038\r
- \r
+\r
## If TRUE, enable the statistic functionality about variable usage. Such information is\r
# stored as a vendor configuration table into the EFI system table.\r
- # If user wants to get variable usage info, this pcd should be set as TRUE.\r
+ # If user wants to use VariableInfo application in MdeModulePkg\Application directory to get\r
+ # variable usage info, this pcd should be set as TRUE. Otherwise VariableInfo application can\r
+ # not output useful info.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdVariableCollectStatistics|FALSE|BOOLEAN|0x0001003f\r
- \r
+\r
## If TRUE, Unicode Collation Protocol will be installed.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollationSupport|TRUE|BOOLEAN|0x00010040\r
- \r
+\r
## If TRUE, Unicode Collation 2 Protocol will be installed.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollation2Support|TRUE|BOOLEAN|0x00010041\r
- \r
+\r
## If TRUE, Graphics Output Protocol will be installed on virtual handle created by ConsplitterDxe.\r
# It could be set FALSE to save size.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdConOutGopSupport|TRUE|BOOLEAN|0x00010042\r
- \r
+\r
## If TRUE, UGA Draw Protocol will be installed on virtual handle created by ConsplitterDxe.\r
# It could be set FALSE to save size.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdConOutUgaSupport|TRUE|BOOLEAN|0x00010043\r
- \r
+\r
## If TRUE, when PeiCore dispatches a PEI module, PeiCore will first search TE section from this PEIM to load the image.\r
# If TE section is not found, then PeiCore will search PE section.\r
# If FALSE, PeiCore will first search PE section from PEIM to load the image.\r
# This PCD is used to tune Pei phase performance to reduce the search image time.\r
# It can be set according to the generated image section type.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreImageLoaderSearchTeSectionFirst|TRUE|BOOLEAN|0x00010044\r
- \r
+\r
## If TRUE, force to switch off the support of legacy usb. So legacy usb device driver can not make use of SMI\r
# interrupt to access usb device in the case of absence of usb stack.\r
##\r
## If TRUE, HiiImageProtocol will be installed.\r
# FALSE is for size reduction.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdSupportHiiImageProtocol|TRUE|BOOLEAN|0x00010100\r
- \r
+\r
## If TRUE, USB KeyBoard Driver disables the default keyboard layout.\r
# The default keyboard layout serves as the backup when no keyboard layout can be retrieved\r
# from HII database.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdDisableDefaultKeyboardLayoutInUsbKbDriver|FALSE|BOOLEAN|0x00010200\r
\r
- ## If TRUE, Setup Browser supports GUID opcodes generated from Framework HII VFR file by VFR compiler. \r
+ ## If TRUE, Setup Browser supports GUID opcodes generated from Framework HII VFR file by VFR compiler.\r
# If TRUE, the PeiCore will handle the framework FvHob and install FvInfo PPI for it.\r
## This is used to provide backward compatibility support to Framework HII and Framework FvHob.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdFrameworkCompatibilitySupport|FALSE|BOOLEAN|0x00012009\r
- \r
+\r
##\r
# If TRUE, HelloWorld Application will print the verbose information.\r
# This PCD is a sample to explain FeatureFlag PCD usage.\r
##\r
# If TRUE, FULL FTW protocol services (total six APIs) will be produced.\r
# If FASLE, only FTW Write service is available.\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdFullFtwServiceEnable|TRUE|BOOLEAN|0x0001200a\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFullFtwServiceEnable|TRUE|BOOLEAN|0x0001200b\r
+\r
+ ##\r
+ # If TRUE, DXE IPL must support the UEFI decompression algorithm.\r
+ # If FALSE, DXE IPL will not support UEFI decompression to save space.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSupportUefiDecompress|TRUE|BOOLEAN|0x0001200c\r
\r
[PcdsFeatureFlag.IA32]\r
- ## \r
+ ##\r
# This feature flag specifies whether DxeIpl switches to long mode to enter DXE phase.\r
# If it is TRUE, DxeIpl will load a 64-bit DxeCore and switch to long mode to hand over to DxeCore;\r
# otherwise, DxeIpl will load a 32-bit DxeCore and perform stack switch to hand over to DxeCore.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPcdCallBackNumberPerPcdEntry|0x08|UINT32|0x0001000f\r
\r
## VPD type PCD allow developer point an absoluted physical address PcdVpdBaseAddress\r
- # to store PCD value. \r
+ # to store PCD value.\r
#\r
gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress|0x0|UINT32|0x00010010\r
- \r
+\r
## Maximum number of FV is supported by PeiCore's dispatching.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxFvSupported|6|UINT32|0x00010030\r
\r
\r
## Maximum PPI count is supported by PeiCore's PPI database.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPpiSupported|64|UINT32|0x00010033\r
- \r
- ## Size of the NV variable range.\r
+\r
+ ## Size of the NV variable range. Note that this value should less than or equal to PcdFlashNvStorageFtwSpareSize\r
+ # The root cause is that variable driver will use FTW protocol to reclaim variable region.\r
+ # If the length of variable region is larger than FTW spare size, it means the whole variable region can not\r
+ # be reflushed through the manner of fault tolerant write.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x0|UINT32|0x30000002\r
- \r
- ## Maximum allowable size of a common type variable, that is, non-hardware error type variable.\r
+\r
+ ## The maximum size of single common variable, that is non-HwErr type varible.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x400|UINT32|0x30000003\r
- \r
- ## Maximum allowable size of a single hardware error record variable.\r
+\r
+ ## The maximum size of single hardware error record variable.\r
+ # In IA32/X64 platforms, this value should be larger than 1KB.\r
+ # In IA64 platforms, this value should be larger than 128KB.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxHardwareErrorVariableSize|0x8000|UINT32|0x30000004\r
- \r
- ## Size of allocated memory for volatile variable store. Variables are stored in such region and \r
- # total length of all variables should not larger than this value.\r
- ##\r
+\r
+ ## The size of reserved HwErr variable space. This space is located at NV variable range.\r
+ # HwErr type variable is stored with common non-volatile variables in NV region.\r
+ # this value is used to guarantee the space of HwErr type variable and not populated by common variable.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdHwErrStorageSize|0x8000|UINT32|0x30000006\r
+\r
+ ## The size of volatile buffer. This buffer is used to store VOLATILE attribute variable.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdVariableStoreSize|0x10000|UINT32|0x30000005\r
- \r
- ## Size of the FTW spare block range.\r
+\r
+ ## Size of the FTW spare block range. Note that this value should larger than PcdFlashNvStorageVariableSize\r
+ # The root cause is that variable driver will use FTW protocol to reclaim variable region.\r
+ # If the length of variable region is larger than FTW spare size, it means the whole variable region can not\r
+ # be reflushed through the manner of fault tolerant write.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x0|UINT32|0x30000014\r
- \r
+\r
## Size of the FTW working block range.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x0|UINT32|0x30000011\r
\r
\r
## RTC Update Timeout Value\r
gEfiMdeModulePkgTokenSpaceGuid.PcdRealTimeClockUpdateTimeout|100000|UINT32|0x00010034\r
- \r
+\r
[PcdsPatchableInModule,PcdsDynamic]\r
##\r
# This PCD defines the Console output column and the default value is 25 according to UEFI spec\r
##\r
gEfiMdeModulePkgTokenSpaceGuid.PcdConOutRow|25|UINT32|0x40000006\r
- \r
+\r
##\r
# This PCD defines the Console output row and the default value is 80 according to UEFI spec\r
##\r
gEfiMdeModulePkgTokenSpaceGuid.PcdConOutColumn|80|UINT32|0x40000007\r
- \r
+\r
[PcdsFixedAtBuild,PcdsDynamic]\r
- ## Base address of the NV variable range in flash device \r
+ ## Base address of the NV variable range in flash device\r
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001\r
- \r
+\r
## Base address of the FTW spare block range in flash device.\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x0|UINT32|0x30000013 \r
- \r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x0|UINT32|0x30000013\r
+\r
## Base address of the FTW working block range in flash device.\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0x0|UINT32|0x30000010 \r
- \r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0x0|UINT32|0x30000010\r
+\r
##\r
# This PCD defines the print string.\r
# This PCD is a sample to explain String typed PCD usage.\r
##\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintString|L"UEFI Hello World!\n"|VOID*|0x40000004 \r
- \r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintString|L"UEFI Hello World!\n"|VOID*|0x40000004\r
+\r
[PcdsFixedAtBuild,PcdsPatchableInModule,PcdsDynamic]\r
##\r
# This PCD defines the times to print hello world string.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintTimes|1|UINT32|0x40000005\r
\r
## Indicate the max size of the populated capsule image that the platform can support.\r
- # The default max size is 100MB (0x6400000) for more than one large capsule images. \r
+ # The default max size is 100MB (0x6400000) for more than one large capsule images.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizePopulateCapsule|0x6400000|UINT32|0x0001001e\r
- \r
+\r
## Indicate the max size of the non-populated capsule image that the platform can support.\r
# The default max size is 10MB (0xa00000) for the casule image without populated flag setting.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizeNonPopulateCapsule|0xa00000|UINT32|0x0001001f\r
+\r
+ ## Null-terminated Unicode string of the firmware vendor name that is default name filled into the EFI System Table\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVendor|L"EDK II"|VOID*|0xx00010050\r
+\r
+ ## Firmware revision that is default value filled into the EFI System Table\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareRevision|0x00010000|UINT32|0x00010051\r
+\r
+ ## Null-terminated Unicode string that described the firmware version\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString|L""|VOID*|0x00010052\r
+\r
+ ## Null-terminated Unicode string that contains the date the formware was released\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareReleaseDateString|L""|VOID*|0x00010053\r
+\r
projects / mirror_edk2.git / blobdiff