# @Prompt Shadow Peim On S3 Boot. \r
gEfiMdeModulePkgTokenSpaceGuid.PcdShadowPeimOnS3Boot|FALSE|BOOLEAN|0x30001028\r
\r
- ## Default OEM ID for ACPI table creation, its length must be 0x6 bytes to follow ACPI specification.\r
- # @Prompt Default OEM ID for ACPI table creation.\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemId|"INTEL "|VOID*|0x30001034\r
-\r
- ## Default OEM Table ID for ACPI table creation, it is "EDK2 ".\r
- # @Prompt Default OEM Table ID for ACPI table creation.\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemTableId|0x20202020324B4445|UINT64|0x30001035\r
-\r
- ## Default OEM Revision for ACPI table creation.\r
- # @Prompt Default OEM Revision for ACPI table creation.\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemRevision|0x00000002|UINT32|0x30001036\r
-\r
- ## Default Creator ID for ACPI table creation.\r
- # @Prompt Default Creator ID for ACPI table creation.\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorId|0x20202020|UINT32|0x30001037\r
-\r
- ## Default Creator Revision for ACPI table creation.\r
- # @Prompt Default Creator Revision for ACPI table creation.\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorRevision|0x01000013|UINT32|0x30001038\r
-\r
## The mask is used to control memory profile behavior.<BR><BR>\r
# BIT0 - Enable UEFI memory profile.<BR>\r
# BIT1 - Enable SMRAM profile.<BR>\r
# EfiMemoryMappedIOPortSpace 0x1000<BR>\r
# EfiPalCode 0x2000<BR>\r
# EfiPersistentMemory 0x4000<BR>\r
+ # OEM Reserved 0x4000000000000000<BR>\r
# OS Reserved 0x8000000000000000<BR>\r
#\r
# e.g. Reserved+ACPINvs+ACPIReclaim+RuntimeCode+RuntimeData are needed, 0x661 should be used.<BR>\r
# @Prompt Memory profile memory type.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfileMemoryType|0x0|UINT64|0x30001042\r
\r
- ## UART clock frequency is for the baud rate configuration.\r
- # @Prompt Serial Port Clock Rate.\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdSerialClockRate|1843200|UINT32|0x00010066\r
- \r
## PCI Serial Device Info. It is an array of Device, Function, and Power Management\r
# information that describes the path that contains zero or more PCI to PCI briges \r
# followed by a PCI serial device. Each array entry is 4-bytes in length. The \r
gEfiMdeModulePkgTokenSpaceGuid.PcdSetupConOutRow|25|UINT32|0x4000000e\r
\r
[PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]\r
+ ## UART clock frequency is for the baud rate configuration.\r
+ # @Prompt Serial Port Clock Rate.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialClockRate|1843200|UINT32|0x00010066\r
+\r
+ ## This PCD points to the front page formset GUID\r
+ # Compare the FormsetGuid or ClassGuid with this PCD value can detect whether in front page\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFrontPageFormSetGuid|{ 0xbc, 0x30, 0x0c, 0x9e,0x06, 0x3f, 0xa6, 0x4b, 0x82, 0x88, 0x9, 0x17, 0x9b, 0x85, 0x5d, 0xbe }|VOID*|0x0001006e\r
+\r
## Base address of the NV variable range in flash device.\r
# @Prompt Base address of flash NV variable range.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001\r
# @Prompt Flag to request system reboot after processing capsule.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdSystemRebootAfterCapsuleProcessFlag|0x0001|UINT16|0x0000006d\r
\r
+ ## Publish PropertiesTable or not.\r
+ #\r
+ # If this PCD is TRUE, DxeCore publishs PropertiesTable.\r
+ # DxeCore evaluates if all runtime drivers has 4K aligned PE sections. If all\r
+ # PE sections in runtime drivers are 4K aligned, DxeCore sets BIT0 in\r
+ # PropertiesTable. Or DxeCore clears BIT0 in PropertiesTable.\r
+ # If this PCD is FALSE, DxeCore does not publish PropertiesTable.\r
+ #\r
+ # If PropertiesTable has BIT0 set, DxeCore uses below policy in UEFI memory map:\r
+ # 1) Use EfiRuntimeServicesCode for runtime driver PE image code section and\r
+ # use EfiRuntimeServicesData for runtime driver PE image header and other section.\r
+ # 2) Set EfiRuntimeServicesCode to be EFI_MEMORY_RO.\r
+ # 3) Set EfiRuntimeServicesData to be EFI_MEMORY_XP.\r
+ # 4) Set EfiMemoryMappedIO and EfiMemoryMappedIOPortSpace to be EFI_MEMORY_XP.\r
+ #\r
+ # NOTE: Platform need gurantee this PCD is set correctly. Platform should set\r
+ # this PCD to be TURE if and only if all runtime driver has seperated Code/Data\r
+ # section. If PE code/data sections are merged, the result is unpredictable.\r
+ #\r
+ # @Prompt Publish UEFI PropertiesTable.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PropertiesTableEnable|TRUE|BOOLEAN|0x0000006e\r
+\r
+ ## Default OEM ID for ACPI table creation, its length must be 0x6 bytes to follow ACPI specification.\r
+ # @Prompt Default OEM ID for ACPI table creation.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemId|"INTEL "|VOID*|0x30001034\r
+\r
+ ## Default OEM Table ID for ACPI table creation, it is "EDK2 ".\r
+ # @Prompt Default OEM Table ID for ACPI table creation.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemTableId|0x20202020324B4445|UINT64|0x30001035\r
+\r
+ ## Default OEM Revision for ACPI table creation.\r
+ # @Prompt Default OEM Revision for ACPI table creation.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemRevision|0x00000002|UINT32|0x30001036\r
+\r
+ ## Default Creator ID for ACPI table creation.\r
+ # @Prompt Default Creator ID for ACPI table creation.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorId|0x20202020|UINT32|0x30001037\r
+\r
+ ## Default Creator Revision for ACPI table creation.\r
+ # @Prompt Default Creator Revision for ACPI table creation.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorRevision|0x01000013|UINT32|0x30001038\r
+\r
[PcdsPatchableInModule]\r
## Specify memory size with page number for PEI code when\r
# Loading Module at Fixed Address feature is enabled.\r