Fix VS2013 build failure.

[mirror_edk2.git] / MdeModulePkg / MdeModulePkg.dec

diff --git a/MdeModulePkg/MdeModulePkg.dec b/MdeModulePkg/MdeModulePkg.dec
index a557466cd0ea1c32a16282c8919222e2e0571772..47d9fdda1a7b7493a8ec27511724be794abe5053 100644 (file)
--- a/MdeModulePkg/MdeModulePkg.dec
+++ b/MdeModulePkg/MdeModulePkg.dec
@@ -270,6 +270,9 @@
   ## Include/Guid/ConnectConInEvent.h\r
   gConnectConInEventGuid             = { 0xdb4e8151, 0x57ed, 0x4bed, { 0x88, 0x33, 0x67, 0x51, 0xb5, 0xd1, 0xa8, 0xd7 }}\r
 \r
+  ## Include/Guid/StatusCodeDataTypeVariable.h\r
+  gEdkiiStatusCodeDataTypeVariableGuid = { 0xf6ee6dbb, 0xd67f, 0x4ea0, { 0x8b, 0x96, 0x6a, 0x71, 0xb1, 0x9d, 0x84, 0xad }}\r
+\r
 [Ppis]\r
   ## Include/Ppi/AtaController.h\r
   gPeiAtaControllerPpiGuid       = { 0xa45e60d1, 0xc719, 0x44aa, { 0xb0, 0x7a, 0xaa, 0x77, 0x7f, 0x85, 0x90, 0x6d }}\r
@@ -304,6 +307,9 @@
   ## Include/Ppi/PostBootScriptTable.h\r
   gPeiPostScriptTablePpiGuid    =  { 0x88c9d306, 0x900, 0x4eb5, { 0x82, 0x60, 0x3e, 0x2d, 0xbe, 0xda, 0x1f, 0x89}}\r
 \r
+  ## Include/Ppi/SerialPortPei.h\r
+  gPeiSerialPortPpiGuid         =  { 0x490e9d85, 0x8aef, 0x4193, { 0x8e, 0x56, 0xf7, 0x34, 0xa9, 0xff, 0xac, 0x8b}}\r
+\r
 [Protocols]\r
   ## Load File protocol provides capability to load and unload EFI image into memory and execute it.\r
   #  Include/Protocol/LoadPe32Image.h\r
@@ -580,7 +586,7 @@
   gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable|0|UINT64|0x30001015\r
 \r
   ## Smbios version\r
-  gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosVersion|0x0207|UINT16|0x00010055\r
+  gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosVersion|0x0208|UINT16|0x00010055\r
 \r
   ## TFTP BlockSize. Initial value 0 means using default block size which is (MTU-IP_HEADER-UDP_HEADER-TFTP_HEADER)\r
   #  to handle all link layers. If the value is non zero, the PCD value will be used as block size.\r
@@ -603,6 +609,10 @@
   #  PROGRESS_CODE_S3_SUSPEND_END   = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001))    = 0x03078001\r
   gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendEnd|0x03078001|UINT32|0x30001033\r
 \r
+  ## Error Code for SetVariable failure.\r
+  #  EDKII_ERROR_CODE_SET_VARIABLE  = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000002)) = 0x03058002\r
+  gEfiMdeModulePkgTokenSpaceGuid.PcdErrorCodeSetVariable|0x03058002|UINT32|0x30001040\r
+\r
 [PcdsFixedAtBuild,PcdsPatchableInModule]\r
   ## VPD type PCD allow developer point an absoluted physical address PcdVpdBaseAddress\r
   #  to store PCD value.\r
@@ -685,6 +695,26 @@
   ## Default Creator Revision for ACPI table creation.\r
   gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorRevision|0x01000013|UINT32|0x30001038\r
 \r
+  ## UART clock frequency is for the baud rate configuration.\r
+  # @Prompt Serial Port Clock Rate\r
+  gEfiMdeModulePkgTokenSpaceGuid.PcdSerialClockRate|1843200|UINT32|0x00010066\r
+  \r
+  ## PCI Serial Device Info. It is an array of Device, Function, and Power Management\r
+  #  information that describes the path that contains zero or more PCI to PCI briges \r
+  #  followed by a PCI serial device.  Each array entry is 4-bytes in length.  The \r
+  #  first byte is the PCI Device Number, then second byte is the PCI Function Number, \r
+  #  and the last two bytes are the offset to the PCI power management capabilities \r
+  #  register used to manage the D0-D3 states.  If a PCI power management capabilities \r
+  #  register is not present, then the last two bytes in the offset is set to 0.  The \r
+  #  array is terminated by an array entry with a PCI Device Number of 0xFF.  For a \r
+  #  non-PCI fixed address serial device, such as an ISA serial device, the value is 0xFF.\r
+  # @Prompt Pci Serial Device Info\r
+  gEfiMdeModulePkgTokenSpaceGuid.PcdSerialPciDeviceInfo|{0xFF}|VOID*|0x00010067\r
+\r
+  ## Serial Port Extended Transmit FIFO Size.  The default is 64 bytes. \r
+  # @Prompt Pci Port Extended Transmit FIFO Size in Bytes\r
+  gEfiMdeModulePkgTokenSpaceGuid.PcdSerialExtendedTxFifoSize|64|UINT32|0x00010068\r
+  \r
 [PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]\r
   ## This PCD defines the Console output column and the default value is 25 according to UEFI spec.\r
   #  This PCD could be set to 0 then console output could be at max column and max row.\r
@@ -882,6 +912,11 @@
   ## This PCD specifies whether full PCI enumeration is disabled.\r
   gEfiMdeModulePkgTokenSpaceGuid.PcdPciDisableBusEnumeration|FALSE|BOOLEAN|0x10000048\r
 \r
+  ## Disk I/O - Number of Data Buffer block\r
+  # Define the size in block of the pre-allocated buffer. It provide better\r
+  # performance for large Disk I/O requests\r
+  gEfiMdeModulePkgTokenSpaceGuid.PcdDiskIoDataBufferBlockNum|64|UINT32|0x30001039\r
+\r
 [PcdsPatchableInModule]\r
   ## Specify  memory size with page number for PEI code when \r
   #  the feature of Loading Module at Fixed Address is enabled\r