# It also provides the definitions(including PPIs/PROTOCOLs/GUIDs and library classes)\r
# and libraries instances, which are used for those modules.\r
#\r
-# Copyright (c) 2007 - 2018, Intel Corporation. All rights reserved.<BR>\r
+# Copyright (c) 2007 - 2019, Intel Corporation. All rights reserved.<BR>\r
# Copyright (c) 2016, Linaro Ltd. All rights reserved.<BR>\r
# (C) Copyright 2016 Hewlett Packard Enterprise Development LP<BR>\r
# Copyright (c) 2017, AMD Incorporated. All rights reserved.<BR>\r
# Copyright (c) 2016, Microsoft Corporation<BR>\r
-# This program and the accompanying materials are licensed and made available under\r
-# the terms and conditions of the BSD License that accompanies this distribution.\r
-# The full text of the license may be found at\r
-# http://opensource.org/licenses/bsd-license.php.\r
-#\r
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
+# SPDX-License-Identifier: BSD-2-Clause-Patent\r
#\r
##\r
\r
\r
\r
[LibraryClasses]\r
- ## @libraryclass IpIo layer upon EFI IP4 Protocol.\r
- # This library is only intended to be used by UEFI network stack modules.\r
- IpIoLib|Include/Library/IpIoLib.h\r
-\r
- ## @libraryclass Basic function for UEFI network stack.\r
- # This library is only intended to be used by UEFI network stack modules.\r
- NetLib|Include/Library/NetLib.h\r
-\r
- ## @libraryclass The helper routines to access UDP service.\r
- # This library is only intended to be used by UEFI network stack modules.\r
- UdpIoLib|Include/Library/UdpIoLib.h\r
-\r
- ## @libraryclass The helper routines to access TCP service.\r
- # This library is only intended to be used by UEFI network stack modules.\r
- TcpIoLib|Include/Library/TcpIoLib.h\r
-\r
- ## @libraryclass The helper routines to access HTTP service.\r
- # This library is only intended to be used by UEFI network stack modules.\r
- HttpLib|Include/Library/HttpLib.h\r
-\r
## @libraryclass Defines a set of methods to reset whole system.\r
ResetSystemLib|Include/Library/ResetSystemLib.h\r
\r
## @libraryclass Defines a set of interfaces on how to process capusle image update.\r
CapsuleLib|Include/Library/CapsuleLib.h\r
\r
- ## @libraryclass Library for Deferred Procedure Calls.\r
- DpcLib|Include/Library/DpcLib.h\r
-\r
## @libraryclass Provides global variables that are pointers\r
# to the UEFI HII related protocols.\r
#\r
## Include/Guid/S3SmmInitDone.h\r
gEdkiiS3SmmInitDoneGuid = { 0x8f9d4825, 0x797d, 0x48fc, { 0x84, 0x71, 0x84, 0x50, 0x25, 0x79, 0x2e, 0xf6 } }\r
\r
+ ## Include/Guid/S3StorageDeviceInitList.h\r
+ gS3StorageDeviceInitListGuid = { 0x310e9b8c, 0xcf90, 0x421e, { 0x8e, 0x9b, 0x9e, 0xef, 0xb6, 0x17, 0xc8, 0xef } }\r
+\r
[Ppis]\r
## Include/Ppi/AtaController.h\r
gPeiAtaControllerPpiGuid = { 0xa45e60d1, 0xc719, 0x44aa, { 0xb0, 0x7a, 0xaa, 0x77, 0x7f, 0x85, 0x90, 0x6d }}\r
## Include/Ppi/NvmExpressHostController.h\r
gEdkiiPeiNvmExpressHostControllerPpiGuid = { 0xcae3aa63, 0x676f, 0x4da3, { 0xbd, 0x50, 0x6c, 0xc5, 0xed, 0xde, 0x9a, 0xad } }\r
\r
+ ## Include/Ppi/AtaAhciController.h\r
+ gEdkiiPeiAtaAhciHostControllerPpiGuid = { 0x61dd33ea, 0x421f, 0x4cc0, { 0x89, 0x29, 0xff, 0xee, 0xa9, 0xa1, 0xa2, 0x61 } }\r
+\r
+ ## Include/Ppi/StorageSecurityCommand.h\r
+ gEdkiiPeiStorageSecurityCommandPpiGuid = { 0x35de0b4e, 0x30fb, 0x46c3, { 0xbd, 0x84, 0x1f, 0xdb, 0xa1, 0x58, 0xbb, 0x56 } }\r
+\r
+ ## Include/Ppi/AtaPassThru.h\r
+ gEdkiiPeiAtaPassThruPpiGuid = { 0xa16473fd, 0xd474, 0x4c89, { 0xae, 0xc7, 0x90, 0xb8, 0x3c, 0x73, 0x86, 0x9 } }\r
+\r
+ ## Include/Ppi/Debug.h\r
+ gEdkiiDebugPpiGuid = { 0x999e699c, 0xb013, 0x475e, { 0xb1, 0x7b, 0xf3, 0xa8, 0xae, 0x5c, 0x48, 0x75 } }\r
+\r
[Protocols]\r
## Load File protocol provides capability to load and unload EFI image into memory and execute it.\r
# Include/Protocol/LoadPe32Image.h\r
\r
## Include/Protocol/AtaAtapiPolicy.h\r
gEdkiiAtaAtapiPolicyProtocolGuid = { 0xe59cd769, 0x5083, 0x4f26,{ 0x90, 0x94, 0x6c, 0x91, 0x9f, 0x91, 0x6c, 0x4e } }\r
+\r
+ ## Include/Protocol/PeCoffImageEmulator.h\r
+ gEdkiiPeCoffImageEmulatorProtocolGuid = { 0x96f46153, 0x97a7, 0x4793, { 0xac, 0xc1, 0xfa, 0x19, 0xbf, 0x78, 0xea, 0x97 } }\r
+\r
#\r
# [Error.gEfiMdeModulePkgTokenSpaceGuid]\r
# 0x80000001 | Invalid value provided.\r
# @Prompt Disable default keyboard layout in USB KeyBoard Driver.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdDisableDefaultKeyboardLayoutInUsbKbDriver|FALSE|BOOLEAN|0x00010200\r
\r
- ## Indicates if backward compatibility to Framework HII and Framework FvHob is supported.<BR><BR>\r
- # TRUE - Setup Browser supports GUID opcodes generated from Framework HII VFR file by VFR compiler.\r
- # the PeiCore will handle the framework FvHob and install FvInfo PPI for it.<BR>\r
- # FALSE - Setup Browser doesn't support GUID opcodes generated from Framework HII VFR file by VFR compiler.\r
- # the PeiCore will not handle the framework FvHob and install FvInfo PPI for it.<BR>\r
- # @Prompt Enable framework backward compatibility support.\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdFrameworkCompatibilitySupport|FALSE|BOOLEAN|0x00012009\r
-\r
## Indicates if HelloWorld Application will print the verbose information.\r
# This PCD is a sample to explain FeatureFlag PCD usage.<BR><BR>\r
# TRUE - HelloWorld Application will print the verbose information.<BR>\r
# If enabled, accessing NULL address in UEFI or SMM code can be caught.<BR><BR>\r
# BIT0 - Enable NULL pointer detection for UEFI.<BR>\r
# BIT1 - Enable NULL pointer detection for SMM.<BR>\r
- # BIT2..6 - Reserved for future uses.<BR>\r
+ # BIT2..5 - Reserved for future uses.<BR>\r
+ # BIT6 - Enable non-stop mode.<BR>\r
# BIT7 - Disable NULL pointer detection just after EndOfDxe. <BR>\r
# This is a workaround for those unsolvable NULL access issues in\r
# OptionROM, boot loader, etc. It can also help to avoid unnecessary\r
# free pages for all of them. The page allocation for the type related to\r
# cleared bits keeps the same as ususal.\r
#\r
+ # This PCD is only valid if BIT0 and/or BIT2 are set in PcdHeapGuardPropertyMask.\r
+ #\r
# Below is bit mask for this PCD: (Order is same as UEFI spec)<BR>\r
# EfiReservedMemoryType 0x0000000000000001<BR>\r
# EfiLoaderCode 0x0000000000000002<BR>\r
# if there's enough free memory for all of them. The pool allocation for the\r
# type related to cleared bits keeps the same as ususal.\r
#\r
+ # This PCD is only valid if BIT1 and/or BIT3 are set in PcdHeapGuardPropertyMask.\r
+ #\r
# Below is bit mask for this PCD: (Order is same as UEFI spec)<BR>\r
# EfiReservedMemoryType 0x0000000000000001<BR>\r
# EfiLoaderCode 0x0000000000000002<BR>\r
gEfiMdeModulePkgTokenSpaceGuid.PcdHeapGuardPoolType|0x0|UINT64|0x30001053\r
\r
## This mask is to control Heap Guard behavior.\r
- # Note that due to the limit of pool memory implementation and the alignment\r
- # requirement of UEFI spec, BIT7 is a try-best setting which cannot guarantee\r
- # that the returned pool is exactly adjacent to head guard page or tail guard\r
- # page.\r
+ #\r
+ # Note:\r
+ # a) Heap Guard is for debug purpose and should not be enabled in product\r
+ # BIOS.\r
+ # b) Due to the limit of pool memory implementation and the alignment\r
+ # requirement of UEFI spec, BIT7 is a try-best setting which cannot\r
+ # guarantee that the returned pool is exactly adjacent to head guard\r
+ # page or tail guard page.\r
+ # c) UEFI freed-memory guard and UEFI pool/page guard cannot be enabled\r
+ # at the same time.\r
+ #\r
# BIT0 - Enable UEFI page guard.<BR>\r
# BIT1 - Enable UEFI pool guard.<BR>\r
# BIT2 - Enable SMM page guard.<BR>\r
# BIT3 - Enable SMM pool guard.<BR>\r
+ # BIT4 - Enable UEFI freed-memory guard (Use-After-Free memory detection).<BR>\r
+ # BIT6 - Enable non-stop mode.<BR>\r
# BIT7 - The direction of Guard Page for Pool Guard.\r
# 0 - The returned pool is near the tail guard page.<BR>\r
# 1 - The returned pool is near the head guard page.<BR>\r
# @Prompt VPD base address.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress|0x0|UINT32|0x00010010\r
\r
- ## Maximum number of FV is supported by PeiCore's dispatching.\r
- # @Prompt Maximum number of FV supported by PeiCore.\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxFvSupported|6|UINT32|0x00010030\r
-\r
- ## Maximum File count in every FV is supported by PeiCore's dispatching.\r
- # PeiCore supported File type includes PEIM, Combined PEIM and FV.\r
- # @Prompt Maximum File count per FV supported by PeiCore.\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeimPerFv|32|UINT32|0x00010031\r
-\r
## Maximum stack size for PeiCore.\r
# @Prompt Maximum stack size for PeiCore.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeiStackSize|0x20000|UINT32|0x00010032\r
\r
- ## Maximum PPI count is supported by PeiCore's PPI database.\r
- # @Prompt Maximum PPI count supported by PeiCore.\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPpiSupported|64|UINT32|0x00010033\r
-\r
## The maximum size of a single non-HwErr type variable.\r
# @Prompt Maximum variable size.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x400|UINT32|0x30000003\r
# @Prompt Serial port registers use MMIO.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseMmio|FALSE|BOOLEAN|0x00020000\r
\r
+ ## Indicates the access width for 16550 serial port registers.\r
+ # Default is 8-bit access mode.<BR><BR>\r
+ # 8 - 16550 serial port registers are accessed in 8-bit width.<BR>\r
+ # 32 - 16550 serial port registers are accessed in 32-bit width.<BR>\r
+ # @Prompt Serial port register access width.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterAccessWidth|8|UINT8|0x00020007\r
+\r
## Indicates if the 16550 serial port hardware flow control will be enabled. Default is FALSE.<BR><BR>\r
# TRUE - 16550 serial port hardware flow control will be enabled.<BR>\r
# FALSE - 16550 serial port hardware flow control will be disabled.<BR>\r
## Set image protection policy. The policy is bitwise.\r
# If a bit is set, the image will be protected by DxeCore if it is aligned.\r
# The code section becomes read-only, and the data section becomes non-executable.\r
- # If a bit is clear, the image will not be protected.<BR><BR>\r
+ # If a bit is clear, nothing will be done to image code/data sections.<BR><BR>\r
# BIT0 - Image from unknown device. <BR>\r
# BIT1 - Image from firmware volume.<BR>\r
+ # <BR>\r
+ # Note: If a bit is cleared, the data section could be still non-executable if\r
+ # PcdDxeNxMemoryProtectionPolicy is enabled for EfiLoaderData, EfiBootServicesData\r
+ # and/or EfiRuntimeServicesData.<BR>\r
+ # <BR>\r
# @Prompt Set image protection policy.\r
# @ValidRange 0x80000002 | 0x00000000 - 0x0000001F\r
gEfiMdeModulePkgTokenSpaceGuid.PcdImageProtectionPolicy|0x00000002|UINT32|0x00001047\r
\r
## Set DXE memory protection policy. The policy is bitwise.\r
# If a bit is set, memory regions of the associated type will be mapped\r
- # non-executable.<BR><BR>\r
- #\r
+ # non-executable.<BR>\r
+ # If a bit is cleared, nothing will be done to associated type of memory.<BR>\r
+ # <BR>\r
# Below is bit mask for this PCD: (Order is same as UEFI spec)<BR>\r
# EfiReservedMemoryType 0x0001<BR>\r
# EfiLoaderCode 0x0002<BR>\r
# @Prompt 64-bit Base address of flash FTW working block range.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase64|0x0|UINT64|0x80000010\r
\r
- ## This PCD defines a reserved memory range for the EMU Variable driver's NV Variable Store.\r
- # The range is valid if non-zero. The memory range size must be PcdVariableStoreSize.\r
- # @Prompt Reserved memory range for EMU variable NV storage.\r
+ ## Indicates if Variable driver will enable emulated variable NV mode.<BR><BR>\r
+ # If this PCD is configured to dynamic, its value should be set before Variable driver starts to work,<BR>\r
+ # otherwise default value will take effect.<BR>\r
+ # TRUE - An EMU variable NV storage will be allocated or reserved for NV variables.<BR>\r
+ # FALSE - No EMU variable NV storage will be allocated or reserved for NV variables.<BR>\r
+ # @Prompt EMU variable NV mode enable.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdEmuVariableNvModeEnable|FALSE|BOOLEAN|0x01100001\r
+\r
+ ## This PCD defines the base address of reserved memory range for EMU variable NV storage.\r
+ # A non-ZERO value indicates a valid range reserved with size given by PcdVariableStoreSize.\r
+ # @Prompt Base of reserved memory range for EMU variable NV storage.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdEmuVariableNvStoreReserved|0|UINT64|0x40000008\r
\r
## This PCD defines the times to print hello world string.\r
\r
## SMBIOS version.\r
# @Prompt SMBIOS version.\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosVersion|0x0301|UINT16|0x00010055\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosVersion|0x0302|UINT16|0x00010055\r
\r
## SMBIOS Docrev field in SMBIOS 3.0 (64-bit) Entry Point Structure.\r
# @Prompt SMBIOS Docrev field in SMBIOS 3.0 (64-bit) Entry Point Structure.\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosDocRev|0x1|UINT8|0x0001006A\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosDocRev|0x0|UINT8|0x0001006A\r
\r
## SMBIOS produce method.\r
# BIT0 set indicates 32-bit entry point and table are produced.<BR>\r
# For the DxeIpl and the DxeCore are both X64, set NX for stack feature also require PcdDxeIplBuildPageTables be TRUE.<BR>\r
# For the DxeIpl and the DxeCore are both IA32 (PcdDxeIplSwitchToLongMode is FALSE), set NX for stack feature also require\r
# IA32 PAE is supported and Execute Disable Bit is available.<BR>\r
- # TRUE - to set NX for stack.<BR>\r
- # FALSE - Not to set NX for stack.<BR>\r
+ # <BR>\r
+ # TRUE - Set NX for stack.<BR>\r
+ # FALSE - Do nothing for stack.<BR>\r
+ # <BR>\r
+ # Note: If this PCD is set to FALSE, NX could be still applied to stack due to PcdDxeNxMemoryProtectionPolicy enabled for\r
+ # EfiBootServicesData.<BR>\r
+ # <BR>\r
# @Prompt Set NX for stack.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdSetNxForStack|FALSE|BOOLEAN|0x0001006f\r
\r
# @ValidList 0x80000001 | 0x0\r
gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateSmmDataPtr|0x0|UINT64|0x00030001\r
\r
- ## This dynamic PCD hold an address to point to the memory of page table. The page table establishes a 1:1\r
- # Virtual to Physical mapping according to the processor physical address bits.\r
- # @Prompt Identify Mapping Page Table pointer.\r
- # @ValidList 0x80000001 | 0x0\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdIdentifyMappingPageTablePtr|0x0|UINT64|0x00030002\r
-\r
## This dynamic PCD holds the information if there is any test key used by the platform.\r
# @Prompt If there is any test key used by the platform.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdTestKeyUsed|FALSE|BOOLEAN|0x00030003\r
# @Prompt NV Storage Default Value Buffer\r
gEfiMdeModulePkgTokenSpaceGuid.PcdNvStoreDefaultValueBuffer|{0x0}|VOID*|0x00030005\r
\r
+ ## VPD type PCD allows a developer to point to an absolute physical address PcdVpdBaseAddress64\r
+ # to store PCD value. It will be DynamicExDefault only.\r
+ # It is used to set VPD region base address. So, it can't be DynamicExVpd PCD. Its value is\r
+ # required to be accessed in PcdDxe driver entry point. So, its value must be set in PEI phase.\r
+ # It can't depend on EFI variable service, and can't be DynamicExHii PCD.\r
+ # @Prompt 64bit VPD base address.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress64|0x0|UINT64|0x00030006\r
+\r
[UserExtensions.TianoCore."ExtraFiles"]\r
MdeModulePkgExtra.uni\r
projects / mirror_edk2.git / blobdiff