# It also provides the defintions(including PPIs/PROTOCOLs/GUIDs and library classes)\r
# and libraries instances, which are used for those modules.\r
#\r
-# Copyright (c) 2007 - 2010, Intel Corporation. All rights reserved.<BR>\r
+# Copyright (c) 2007 - 2011, Intel Corporation. All rights reserved.<BR>\r
# This program and the accompanying materials are licensed and made available under \r
# the terms and conditions of the BSD License that accompanies this distribution. \r
# The full text of the license may be found at\r
\r
## @libraryclass Provides a set of interfaces to abstract the policy of security measurement.\r
#\r
- SecurityManagementLib|MdeModulePkg/Include/Library/SecurityManagementLib.h\r
+ SecurityManagementLib|Include/Library/SecurityManagementLib.h\r
\r
## @libraryclass OEM status code libary is used to report status code to OEM device.\r
#\r
## @libraryclass Provide platform specific hooks.\r
#\r
PlatformHookLib|Include/Library/PlatformHookLib.h\r
+\r
+ ## @libraryclass Provide platform specific hooks for SMM core.\r
+ #\r
+ SmmCorePlatformHookLib|Include/Library/SmmCorePlatformHookLib.h\r
\r
[Guids]\r
## MdeModule package token space guid\r
# Include/Guid/VariableFormat.h\r
gEfiVariableGuid = { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}\r
\r
+ # Include/Guid/VariableIndexTable.h\r
+ gEfiVariableIndexTableGuid = { 0x8cfdb8c8, 0xd6b2, 0x40f3, { 0x8e, 0x97, 0x02, 0x30, 0x7c, 0xc9, 0x8b, 0x7c }}\r
+\r
+ ## Guid is defined for SMM variable module to notify SMM variable wrapper module when variable write service was ready.\r
+ # Include/Guid/SmmVariableCommon.h\r
+ gSmmVariableWriteGuid = { 0x93ba1826, 0xdffb, 0x45dd, { 0x82, 0xa7, 0xe7, 0xdc, 0xaa, 0x3b, 0xbd, 0xf3 }}\r
+ \r
## Performance protocol guid that also acts as the performance HOB guid and performance variable GUID\r
# Include/Guid/Performance.h\r
gPerformanceProtocolGuid = { 0x76B6BDFA, 0x2ACD, 0x4462, { 0x9E, 0x3F, 0xCB, 0x58, 0xC9, 0x69, 0xD9, 0x37 }}\r
+ gSmmPerformanceProtocolGuid = { 0xf866226a, 0xeaa5, 0x4f5a, { 0xa9, 0xa, 0x6c, 0xfb, 0xa5, 0x7c, 0x58, 0x8e } }\r
\r
## Guid is defined for CRC32 encapsulation scheme.\r
# Include/Guid/Crc32GuidedSectionExtraction.h\r
# Include/Guid/LoadModuleAtFixedAddress.h\r
gLoadFixedAddressConfigurationTableGuid = { 0x2CA88B53,0xD296,0x4080, { 0xA4,0xA5,0xCA,0xD9,0xBA,0xE2,0x4B,0x9 } }\r
\r
+ ## GUID used to store the global debug mask value into an EFI Variable\r
+ # Include/Guid/DebugMask.h \r
+ gEfiGenericVariableGuid = { 0x59d1c24f, 0x50f1, 0x401a, {0xb1, 0x01, 0xf3, 0x3e, 0x0d, 0xae, 0xd4, 0x43} }\r
+ \r
+ ## Event for the DXE Core to signal idle events\r
+ # Include/Guid/EventIdle.h\r
+ gIdleLoopEventGuid = { 0x3c8d294c, 0x5fc3, 0x4451, { 0xbb, 0x31, 0xc4, 0xc0, 0x32, 0x29, 0x5e, 0x6c } }\r
+\r
+ ## Include/Guid/RecoveryDevice.h\r
+ gRecoveryOnFatUsbDiskGuid = { 0x0FFBCE19, 0x324C, 0x4690, { 0xA0, 0x09, 0x98, 0xC6, 0xAE, 0x2E, 0xB1, 0x86 }}\r
+\r
+ ## Include/Guid/RecoveryDevice.h\r
+ gRecoveryOnFatIdeDiskGuid = { 0xB38573B6, 0x6200, 0x4AC5, { 0xB5, 0x1D, 0x82, 0xE6, 0x59, 0x38, 0xD7, 0x83 }}\r
+\r
+ ## Include/Guid/RecoveryDevice.h\r
+ gRecoveryOnFatFloppyDiskGuid = { 0x2E3D2E75, 0x9B2E, 0x412D, { 0xB4, 0xB1, 0x70, 0x41, 0x6B, 0x87, 0x00, 0xFF }}\r
+\r
+ ## Include/Guid/RecoveryDevice.h\r
+ gRecoveryOnDataCdGuid = { 0x5CAC0099, 0x0DC9, 0x48E5, { 0x80, 0x68, 0xBB, 0x95, 0xF5, 0x40, 0x0A, 0x9F }}\r
+\r
+ ## Include/Guid/SmmLockBox.h\r
+ gEfiSmmLockBoxCommunicationGuid = { 0x2a3cfebd, 0x27e8, 0x4d0a, { 0x8b, 0x79, 0xd6, 0x88, 0xc2, 0xa3, 0xe1, 0xc0 }}\r
+\r
+ ## Include/Guid/AcpiS3Context.h\r
+ gEfiAcpiVariableGuid = { 0xAF9FFD67, 0xEC10, 0x488A, { 0x9D, 0xFC, 0x6C, 0xBF, 0x5E, 0xE2, 0x2C, 0x2E }}\r
+\r
+ ## Include/Guid/AcpiS3Context.h\r
+ gEfiAcpiS3ContextGuid = { 0xef98d3a, 0x3e33, 0x497a, { 0xa4, 0x1, 0x77, 0xbe, 0x3e, 0xb7, 0x4f, 0x38 }}\r
+\r
+ ## Include/Guid/BootScriptExecutorVariable.h\r
+ gEfiBootScriptExecutorVariableGuid = { 0x3079818c, 0x46d4, 0x4a73, { 0xae, 0xf3, 0xe3, 0xe4, 0x6c, 0xf1, 0xee, 0xdb }}\r
+ gEfiBootScriptExecutorContextGuid = { 0x79cb58c4, 0xac51, 0x442f, { 0xaf, 0xd7, 0x98, 0xe4, 0x7d, 0x2e, 0x99, 0x8 }}\r
+\r
+[Ppis]\r
+ ## Include/Ppi/AtaController.h\r
+ gPeiAtaControllerPpiGuid = { 0xa45e60d1, 0xc719, 0x44aa, { 0xb0, 0x7a, 0xaa, 0x77, 0x7f, 0x85, 0x90, 0x6d }}\r
+\r
+ ## Include/Ppi/UsbHostController.h\r
+ gPeiUsbHostControllerPpiGuid = { 0x652B38A9, 0x77F4, 0x453F, { 0x89, 0xD5, 0xE7, 0xBD, 0xC3, 0x52, 0xFC, 0x53 }}\r
+\r
+ ## Include/Ppi/Usb2HostController.h\r
+ gPeiUsb2HostControllerPpiGuid = { 0xfedd6305, 0xe2d7, 0x4ed5, { 0x9f, 0xaa, 0xda, 0x8, 0xe, 0x33, 0x6c, 0x22 }}\r
+\r
+ ## Include/Ppi/UsbController.h\r
+ gPeiUsbControllerPpiGuid = { 0x3BC1F6DE, 0x693E, 0x4547, { 0xA3, 0x00, 0x21, 0x82, 0x3C, 0xA4, 0x20, 0xB2 }}\r
+\r
+ ## Include/Ppi/UsbIo.h\r
+ gPeiUsbIoPpiGuid = { 0x7C29785C, 0x66B9, 0x49FC, { 0xB7, 0x97, 0x1C, 0xA5, 0x55, 0x0E, 0xF2, 0x83 }}\r
+\r
+ ## Include/Ppi/Capsule.h\r
+ gPeiCapsulePpiGuid = { 0x3acf33ee, 0xd892, 0x40f4, { 0xa2, 0xfc, 0x38, 0x54, 0xd2, 0xe1, 0x32, 0x3d }}\r
+\r
+ ## Include/Ppi/SecPerformance.h\r
+ gPeiSecPerformancePpiGuid = { 0x0ecc666b, 0x4662, 0x47f9, { 0x9d, 0xd5, 0xd0, 0x96, 0xff, 0x7d, 0xa4, 0x9e }}\r
+\r
+ ## Include/Ppi/SmmCommunication.h\r
+ gEfiPeiSmmCommunicationPpiGuid = { 0xae933e1c, 0xcc47, 0x4e38, { 0x8f, 0xe, 0xe2, 0xf6, 0x1d, 0x26, 0x5, 0xdf }}\r
+\r
+ ## Include/Ppi/SmmAccess.h\r
+ gPeiSmmAccessPpiGuid = { 0x268f33a9, 0xcccd, 0x48be, { 0x88, 0x17, 0x86, 0x5, 0x3a, 0xc3, 0x2e, 0xd6 }}\r
+\r
+ ## Include/Ppi/SmmControl.h\r
+ gPeiSmmControlPpiGuid = { 0x61c68702, 0x4d7e, 0x4f43, { 0x8d, 0xef, 0xa7, 0x43, 0x5, 0xce, 0x74, 0xc5 }}\r
+\r
[Protocols]\r
## Load File protocol provides capability to load and unload EFI image into memory and execute it.\r
# Include/Protocol/LoadPe32Image.h\r
# Include/Protocol/SmmFirmwareVolumeBlock.h\r
gEfiSmmFirmwareVolumeBlockProtocolGuid = { 0xd326d041, 0xbd31, 0x4c01, { 0xb5, 0xa8, 0x62, 0x8b, 0xe8, 0x7f, 0x6, 0x53 }}\r
\r
+ ## This protocol allows the error level mask for DEBUG() macros to be adjusted for DXE Phase modules\r
+ # Include/Guid/DebugMask.h \r
+ gEfiDebugMaskProtocolGuid = { 0x4c8a2451, 0xc207, 0x405b, {0x96, 0x94, 0x99, 0xea, 0x13, 0x25, 0x13, 0x41} }\r
+\r
+ ## Include/Protocol/LockBox.h\r
+ gEfiLockBoxProtocolGuid = { 0xbd445d79, 0xb7ad, 0x4f04, { 0x9a, 0xd8, 0x29, 0xbd, 0x20, 0x40, 0xeb, 0x3c }}\r
+\r
[PcdsFeatureFlag]\r
## Indicate whether platform can support update capsule across a system reset\r
gEfiMdeModulePkgTokenSpaceGuid.PcdSupportUpdateCapsuleReset|FALSE|BOOLEAN|0x0001001d\r
# If FALSE, then unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol are disabled.\r
# The default value for this PCD is to disable support for unaligned PCI I/O Protocol requests.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdUnalignedPciIoEnable|FALSE|BOOLEAN|0x0001003e\r
+\r
+ ## This PCD specifies whether TEXT statement is always set to GrayOut statement in HII Form Browser.\r
+ # If TRUE, TEXT statement will always be set to GrayOut.\r
+ # If FALSE, TEXT statement will be set to GrayOut only when GrayOut condition is TRUE.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserGrayOutTextStatement|FALSE|BOOLEAN|0x0001004f\r
\r
+ ## If TRUE, recovery from IDE disk will be supported.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnIdeDisk|TRUE|BOOLEAN|0x00010060\r
+\r
+ ## If TRUE, recovery from FAT floppy disk will be supported.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatFloppyDisk|TRUE|BOOLEAN|0x00010061\r
+\r
+ ## If TRUE, recovery from data CD will be supported.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnDataCD|TRUE|BOOLEAN|0x00010062\r
+\r
+ ## If TRUE, recovery from FAT USB disk will be supported.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatUsbDisk|TRUE|BOOLEAN|0x00010063\r
+\r
[PcdsFeatureFlag.IA32, PcdsFeatureFlag.X64]\r
##\r
# This feature flag specifies whether DxeIpl switches to long mode to enter DXE phase.\r
#\r
gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSwitchToLongMode|TRUE|BOOLEAN|0x0001003b\r
\r
+ ##\r
+ # This feature flag specifies whether DxeIpl should rebuild page tables. This flag only\r
+ # makes sense in the case where the DxeIpl and the DxeCore are both X64.\r
+ #\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplBuildPageTables|TRUE|BOOLEAN|0x0001003c\r
+\r
[PcdsFixedAtBuild]\r
## Dynamic type PCD can be registered callback function for Pcd setting action.\r
# PcdMaxPeiPcdCallBackNumberPerPcdEntry indicate maximum number of callback function\r
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x0|UINT32|0x30000011\r
\r
## FFS filename to find the ACPI tables\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiTableStorageFile|{ 0x25, 0x4e, 0x37, 0x7e, 0x01, 0x8e, 0xee, 0x4f, 0x87, 0xf2, 0x39, 0xc, 0x23, 0xc6, 0x6, 0xcd }|VOID*|16\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiTableStorageFile|{ 0x25, 0x4e, 0x37, 0x7e, 0x01, 0x8e, 0xee, 0x4f, 0x87, 0xf2, 0x39, 0xc, 0x23, 0xc6, 0x6, 0xcd }|VOID*|0x30000016\r
\r
## Single root I/O virtualization virtual function memory BAR alignment\r
# BITN set indicates 2 of n+12 power\r
gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable|0|UINT64|0x30001015\r
\r
## Smbios version\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosVersion|0x0206|UINT16|0x00010055\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosVersion|0x0207|UINT16|0x00010055\r
\r
## TFTP BlockSize. Initial value 0 means using default block size which is (MTU-IP_HEADER-UDP_HEADER-TFTP_HEADER)\r
# to handle all link layers. If the value is non zero, the PCD value will be used as block size.\r
#\r
gEfiMdeModulePkgTokenSpaceGuid.PcdTftpBlockSize|0x0|UINT64|0x30001026\r
\r
+ ## Progress Code for OS Loader LoadImage start.\r
+ # PROGRESS_CODE_OS_LOADER_LOAD = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000)) = 0x03058000\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderLoad|0x03058000|UINT32|0x30001030\r
+\r
+ ## Progress Code for OS Loader StartImage start.\r
+ # PROGRESS_CODE_OS_LOADER_START = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001)) = 0x03058001\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderStart|0x03058001|UINT32|0x30001031\r
+\r
+ ## Progress Code for S3 Suspend start.\r
+ # PROGRESS_CODE_S3_SUSPEND_START = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000)) = 0x03078000\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendStart|0x03078000|UINT32|0x30001032\r
+\r
+ ## Progress Code for S3 Suspend end.\r
+ # PROGRESS_CODE_S3_SUSPEND_END = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001)) = 0x03078001\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendEnd|0x03078001|UINT32|0x30001033\r
+\r
[PcdsFixedAtBuild,PcdsPatchableInModule]\r
## Maximun number of performance log entries during PEI phase.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries|40|UINT8|0x0001002f\r
# If FALSE, then the 16550 serial port hardware flow control is disabled. Default value.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseHardwareFlowControl|FALSE|BOOLEAN|0x00020001\r
\r
+ ## If TRUE, then 16550 serial Tx operations will block if DSR is not asserted (no cable).\r
+ # If FALSE, then the 16550 serial Tx operations will not be blocked if DSR is not asserted. Default value.\r
+ # This PCD is ignored if PcdSerialUseHardwareFlowControl is FALSE.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialDetectCable|FALSE|BOOLEAN|0x00020006\r
+ \r
## Base address of 16550 serial port registers in MMIO or I/O space. Default is 0x3F8.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x03F8|UINT64|0x00020002\r
\r
# BIT0 - FIFO Enable. 0 = Disable FIFOs. 1 = Enable FIFOs.\r
# BIT1 - Clear receive FIFO. 1 = Clear FIFO.\r
# BIT2 - Clear transmit FIFO. 1 = Clear FIFO.\r
- # BIT7..BIT3 - Reserved. Must be 0.\r
+ # BIT4..BIT3 - Reserved. Must be 0.\r
+ # BIT5 - Enable 64-byte FIFO. 0 = Disable 64-byte FIFO. 1 = Enable 64-byte FIFO\r
+ # BIT7..BIT6 - Reserved. Must be 0.\r
#\r
# Default is to enable and clear all FIFOs.\r
#\r
#\r
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxEfiSystemTablePointerAddress|0x0|UINT64|0x30001027\r
\r
-[PcdsPatchableInModule,PcdsDynamic]\r
+[PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]\r
## This PCD defines the Console output column and the default value is 25 according to UEFI spec\r
gEfiMdeModulePkgTokenSpaceGuid.PcdConOutRow|25|UINT32|0x40000006\r
\r
## This PCD defines the Console output row and the default value is 80 according to UEFI spec\r
gEfiMdeModulePkgTokenSpaceGuid.PcdConOutColumn|80|UINT32|0x40000007\r
\r
-[PcdsFixedAtBuild,PcdsDynamic]\r
+[PcdsFixedAtBuild, PcdsDynamic, PcdsDynamicEx]\r
## Base address of the NV variable range in flash device\r
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001\r
\r
## This PCD specifies whether the Multi Root I/O virtualization support.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdMrIovSupport|FALSE|BOOLEAN|0x10000046\r
\r
-[PcdsFixedAtBuild,PcdsPatchableInModule,PcdsDynamic]\r
+[PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]\r
## This PCD defines the times to print hello world string.\r
# This PCD is a sample to explain FixedAtBuild UINT32 PCD usage.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintTimes|1|UINT32|0x40000005\r
## This PCD specifies whether to reset system when memory type information changes.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange|TRUE|BOOLEAN|0x00010056\r
\r
+ ## Specify the foreground color for Subtile text in HII Form Browser. The default value is EFI_BLUE.\r
+ # Only following values defined in UEFI specification are valid:\r
+ # 0x00 (EFI_BLACK)\r
+ # 0x01 (EFI_BLUE)\r
+ # 0x02 (EFI_GREEN)\r
+ # 0x03 (EFI_CYAN)\r
+ # 0x04 (EFI_RED)\r
+ # 0x05 (EFI_MAGENTA)\r
+ # 0x06 (EFI_BROWN)\r
+ # 0x07 (EFI_LIGHTGRAY)\r
+ # 0x08 (EFI_DARKGRAY) \r
+ # 0x09 (EFI_LIGHTBLUE)\r
+ # 0x0A (EFI_LIGHTGREEN)\r
+ # 0x0B (EFI_LIGHTCYAN)\r
+ # 0x0C (EFI_LIGHTRED)\r
+ # 0x0D (EFI_LIGHTMAGENTA)\r
+ # 0x0E (EFI_YELLOW)\r
+ # 0x0F (EFI_WHITE)\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserSubtitleTextColor|0x01|UINT8|0x00010057\r
+ \r
+ ## Specify the foreground color for prompt and Question value text in HII Form Browser. The default value is EFI_BLACK.\r
+ # Only following values defined in UEFI specification are valid:\r
+ # 0x00 (EFI_BLACK)\r
+ # 0x01 (EFI_BLUE)\r
+ # 0x02 (EFI_GREEN)\r
+ # 0x03 (EFI_CYAN)\r
+ # 0x04 (EFI_RED)\r
+ # 0x05 (EFI_MAGENTA)\r
+ # 0x06 (EFI_BROWN)\r
+ # 0x07 (EFI_LIGHTGRAY)\r
+ # 0x08 (EFI_DARKGRAY) \r
+ # 0x09 (EFI_LIGHTBLUE)\r
+ # 0x0A (EFI_LIGHTGREEN)\r
+ # 0x0B (EFI_LIGHTCYAN)\r
+ # 0x0C (EFI_LIGHTRED)\r
+ # 0x0D (EFI_LIGHTMAGENTA)\r
+ # 0x0E (EFI_YELLOW)\r
+ # 0x0F (EFI_WHITE)\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextColor|0x00|UINT8|0x00010058\r
+ \r
+ ## Specify the foreground color for highlighted prompt and Question value text in HII Form Browser.\r
+ # The default value is EFI_LIGHTGRAY. Only following values defined in UEFI specification are valid:\r
+ # 0x00 (EFI_BLACK)\r
+ # 0x01 (EFI_BLUE)\r
+ # 0x02 (EFI_GREEN)\r
+ # 0x03 (EFI_CYAN)\r
+ # 0x04 (EFI_RED)\r
+ # 0x05 (EFI_MAGENTA)\r
+ # 0x06 (EFI_BROWN)\r
+ # 0x07 (EFI_LIGHTGRAY)\r
+ # 0x08 (EFI_DARKGRAY) \r
+ # 0x09 (EFI_LIGHTBLUE)\r
+ # 0x0A (EFI_LIGHTGREEN)\r
+ # 0x0B (EFI_LIGHTCYAN)\r
+ # 0x0C (EFI_LIGHTRED)\r
+ # 0x0D (EFI_LIGHTMAGENTA)\r
+ # 0x0E (EFI_YELLOW)\r
+ # 0x0F (EFI_WHITE)\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextHighlightColor|0x07|UINT8|0x00010059\r
+ \r
+ ## Specify the background color for highlighted prompt and Question value text in HII Form Browser.\r
+ # The default value is EFI_BACKGROUND_BLACK. Only following values defined in UEFI specification are valid:\r
+ # 0x00 (EFI_BACKGROUND_BLACK)\r
+ # 0x10 (EFI_BACKGROUND_BLUE)\r
+ # 0x20 (EFI_BACKGROUND_GREEN)\r
+ # 0x30 (EFI_BACKGROUND_CYAN)\r
+ # 0x40 (EFI_BACKGROUND_RED)\r
+ # 0x50 (EFI_BACKGROUND_MAGENTA)\r
+ # 0x60 (EFI_BACKGROUND_BROWN)\r
+ # 0x70 (EFI_BACKGROUND_LIGHTGRAY)\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldBackgroundHighlightColor|0x00|UINT8|0x0001005A\r
+\r
+ ## Time in second to delay for SATA devices to spin-up for recovery.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSataSpinUpDelayInSecForRecoveryPath|15|UINT16|0x0001005B\r
+\r
+ ## The PCD is used to specify memory size with page number for a pre-allocated ACPI NVS memory to hold\r
+ # runtime created S3 boot script entries. The default page number is 2. When changing the value of this\r
+ # PCD, the platform developer should make sure the memory size is large enough to hold the S3 boot\r
+ # script node created in runtime phase.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptRuntimeTableReservePageNumber|0x2|UINT16|0x0001005C\r
+\r
[PcdsPatchableInModule]\r
## Specify memory size with page number for PEI code when \r
# the feature of Loading Module at Fixed Address is enabled\r
# the feature of Loading Module at Fixed Address is enabled\r
gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressSmmCodePageNumber|0|UINT32|0x0000002c\r
\r
+[PcdsDynamic, PcdsDynamicEx]\r
+ ## This dynamic PCD hold an address to point to private data structure used in DxeS3BootScriptLib library\r
+ # instance which records the S3 boot script table start address, length, etc. To introduce this PCD is\r
+ # only for DxeS3BootScriptLib instance implementation purpose. The platform developer should make sure the\r
+ # default value is set to Zero. And the PCD is assumed ONLY to be accessed in DxeS3BootScriptLib Library.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateDataPtr|0x0|UINT64|0x00030000\r
+\r
projects / mirror_edk2.git / blobdiff