update code to pass K8.

[mirror_edk2.git] / MdeModulePkg / MdeModulePkg.dec

diff --git a/MdeModulePkg/MdeModulePkg.dec b/MdeModulePkg/MdeModulePkg.dec
index fb9f8532c8ab05666b3e4734e31ef6e6a947b0b3..97133869d24c60eee7eac7f04c2b11de55e2c864 100644 (file)
--- a/MdeModulePkg/MdeModulePkg.dec
+++ b/MdeModulePkg/MdeModulePkg.dec
@@ -120,9 +120,6 @@
 \r
   ## Guid specify the device is the console in device.\r
   gEfiConsoleInDeviceGuid        = { 0xD3B36F2B, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}\r
-\r
-  ## Guid specify the device is the hot plug device.\r
-  gEfiHotPlugDeviceGuid          = { 0x220AC432, 0x1D43, 0x49E5, { 0xA7, 0x4F, 0x4C, 0x9D, 0xA6, 0x7A, 0xD2, 0x3B }}\r
   \r
   ## Guid specify the primary console out device.\r
   gEfiPrimaryConsoleOutDeviceGuid = { 0x62BDF38A, 0xE3D5, 0x492C, { 0x95, 0x0C, 0x23, 0xA7, 0xF6, 0x6E, 0x67, 0x2E }}\r
@@ -163,9 +160,6 @@
   ## Guid specify the variable list entries put in the EFI system table.\r
   gEfiVariableInfoGuid           = { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}\r
   \r
-  ## Guid specify the Simple TextIn Notify handle.\r
-  gSimpleTextInExNotifyGuid      = { 0x856f2def, 0x4e93, 0x4d6b, { 0x94, 0xce, 0x1c, 0xfe, 0x47, 0x01, 0x3e, 0xa5 }}\r
-  \r
   ## Platform Override Variable guid\r
   gEfiOverrideVariableGuid       = { 0x8e3d4ad5, 0xf762, 0x438a, { 0xa1, 0xc1, 0x5b, 0x9f, 0xe6, 0x8c, 0x6b, 0x15 }}\r
 \r
@@ -182,13 +176,13 @@
   ## Print protocol defines six basic print functions to print the format unicode and ascii string.\r
   gEfiPrint2ProtocolGuid          = { 0x5bcc3dbc, 0x8c57, 0x450a, { 0xbb, 0x0c, 0xa1, 0xc0, 0xbd, 0xde, 0x48, 0x0c }}\r
 \r
-  ## This protocol defines the EFI generic memory test interfaces in Dxe phase.\r
+  ## This protocol defines the generic memory test interfaces in Dxe phase.\r
   gEfiGenericMemTestProtocolGuid = { 0x309DE7F1, 0x7F5E, 0x4ACE, { 0xB4, 0x9C, 0x53, 0x1B, 0xE5, 0xAA, 0x95, 0xEF }}\r
   \r
   ## Disk Info protocol is used to export Inquiry Data for a drive.\r
   gEfiDiskInfoProtocolGuid       = { 0xD432A67F, 0x14DC, 0x484B, { 0xB3, 0xBB, 0x3F, 0x02, 0x91, 0x84, 0x93, 0x27 }}\r
   \r
-  ## FVB Extension protocol that extends the FVB Class in a component fashion.\r
+  ## This protocol provides an extended service to erase the specified range of a firmware volume block.\r
   gEfiFvbExtensionProtocolGuid   = { 0x53A4C71B, 0xB581, 0x4170, { 0x91, 0xB3, 0x8D, 0xB8, 0x7A, 0x4B, 0x5C, 0x46 }}\r
   \r
   ## Fault tolerant write lite protocol defines only one interface to write \r
@@ -198,7 +192,7 @@
   ## This protocol provides the interfaces to Get/Set the current video mode for GOP/UGA screen\r
   gEfiConsoleControlProtocolGuid = { 0xF42F7782, 0x012E, 0x4C12, { 0x99, 0x56, 0x49, 0xF9, 0x43, 0x04, 0xF7, 0x21 }}\r
   \r
-  ## EFI OEM Badging Protocol defines the interface to get the OEM badging image with the dispaly attribute.\r
+  ## OEM Badging Protocol defines the interface to get the OEM badging image with the dispaly attribute.\r
   gEfiOEMBadgingProtocolGuid     = { 0x170E13C0, 0xBF1B, 0x4218, { 0x87, 0x1D, 0x2A, 0xBD, 0xC6, 0xF8, 0x87, 0xBC }}\r
   \r
   ## Performance protocol interfaces to support cross module performance logging.\r
@@ -219,21 +213,20 @@
   \r
   ## Tcg addtional services to measure PeImage and ActionString.\r
   gEfiTcgPlatformProtocolGuid    = { 0x8c4c9a41, 0xbf56, 0x4627, { 0x9e, 0xa, 0xc8, 0x38, 0x6d, 0x66, 0x11, 0x5c }}\r
+  \r
+  ## Protocol Guid specify the Simple TextIn Notify handle.\r
+  gSimpleTextInExNotifyGuid      = { 0x856f2def, 0x4e93, 0x4d6b, { 0x94, 0xce, 0x1c, 0xfe, 0x47, 0x01, 0x3e, 0xa5 }}  \r
+\r
+  ## Protocol Guid specify the device is the hot plug device.\r
+  gEfiHotPlugDeviceGuid          = { 0x220AC432, 0x1D43, 0x49E5, { 0xA7, 0x4F, 0x4C, 0x9D, 0xA6, 0x7A, 0xD2, 0x3B }}\r
 \r
 [Ppis.common]\r
   ## Pei memory test PPI used to Perform memory test in PEI phase.\r
   gPeiBaseMemoryTestPpiGuid      = { 0xB6EC423C, 0x21D2, 0x490D, { 0x85, 0xC6, 0xDD, 0x58, 0x64, 0xEA, 0xA6, 0x74 }}\r
 \r
-  ## FlashMap PPI abstracts access to FlashMap information.\r
-  #  gPeiFlashMapPpiGuid will be removed in future.\r
-  gPeiFlashMapPpiGuid            = { 0xf34c2fa0, 0xde88, 0x4270, {0x84, 0x14, 0x96, 0x12, 0x22, 0xf4, 0x52, 0x1c } }\r
-  \r
-  ## OperatorPresent PPI responsible for detecting TPM operator presence.\r
-  gPeiOperatorPresencePpiGuid    = { 0x20a7378c, 0xaa83, 0x4ce1, {0x82, 0x1f, 0x47, 0x40, 0xee, 0x1b, 0x3f, 0x9f } }\r
-\r
 [PcdsFeatureFlag.common]\r
   ## Indicate whether platform can support update capsule across a system reset\r
-  gEfiMdeModulePkgTokenSpaceGuid.PcdSupportUpdateCapsuleRest|FALSE|BOOLEAN|0x0001001d\r
+  gEfiMdeModulePkgTokenSpaceGuid.PcdSupportUpdateCapsuleReset|FALSE|BOOLEAN|0x0001001d\r
   \r
   ## This feature flag can be used to enable or disable the Pcd PEIM database \r
   #  traverse capability. Disable it can reduce the size of final image generated.\r
@@ -359,7 +352,7 @@
   ## Maximum buffer for the single variable.\r
   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x400|UINT32|0x30000003\r
   \r
-  ## The hardware error record maximum variable size.\r
+  ## Maximum buffer for Hardware error record variable.\r
   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxHardwareErrorVariableSize|0x8000|UINT32|0x30000004\r
   \r
   ## Maximum buffer for the total variable store.\r