Produces Simple Text Input Protocol, Simple Text Input Extended Protocol and\r
Simple Text Output Protocol upon Serial IO Protocol.\r
\r
-Copyright (c) 2006 - 2008, Intel Corporation. <BR>\r
-All rights reserved. This program and the accompanying materials\r
+Copyright (c) 2006 - 2012, Intel Corporation. All rights reserved.<BR>\r
+This program and the accompanying materials\r
are licensed and made available under the terms and conditions of the BSD License\r
which accompanies this distribution. The full text of the license may be found at\r
http://opensource.org/licenses/bsd-license.php\r
0, // CursorRow\r
TRUE // CursorVisible\r
},\r
+ NULL, // TerminalConsoleModeData\r
0, // SerialInTimeOut\r
- { // RawFiFo\r
- 0,\r
- 0,\r
- { 0 }\r
- },\r
- { // UnicodeFiFo\r
- 0,\r
- 0,\r
- { 0 }\r
- },\r
- { // EfiKeyFiFo\r
- 0,\r
- 0,\r
- { {0} }\r
- },\r
+\r
+ NULL, // RawFifo\r
+ NULL, // UnicodeFiFo\r
+ NULL, // EfiKeyFiFo\r
+\r
NULL, // ControllerNameTable\r
+ NULL, // TimerEvent\r
NULL, // TwoSecondTimeOut\r
INPUT_STATE_DEFAULT,\r
RESET_STATE_DEFAULT,\r
}\r
};\r
\r
+TERMINAL_CONSOLE_MODE_DATA mTerminalConsoleModeData[] = {\r
+ {100, 31},\r
+ //\r
+ // New modes can be added here.\r
+ //\r
+};\r
+\r
/**\r
- Test to see if this driver supports Controller. \r
+ Test to see if this driver supports Controller.\r
\r
@param This Protocol instance pointer.\r
@param Controller Handle of device to test\r
// device path that describes a terminal communications protocol.\r
//\r
if (RemainingDevicePath != NULL) {\r
+ //\r
+ // Check if RemainingDevicePath is the End of Device Path Node,\r
+ // if yes, go on checking other conditions\r
+ //\r
+ if (!IsDevicePathEnd (RemainingDevicePath)) {\r
+ //\r
+ // If RemainingDevicePath isn't the End of Device Path Node,\r
+ // check its validation\r
+ //\r
+ Node = (VENDOR_DEVICE_PATH *) RemainingDevicePath;\r
\r
- Node = (VENDOR_DEVICE_PATH *) RemainingDevicePath;\r
-\r
- if (Node->Header.Type != MESSAGING_DEVICE_PATH ||\r
- Node->Header.SubType != MSG_VENDOR_DP ||\r
- DevicePathNodeLength(&Node->Header) != sizeof(VENDOR_DEVICE_PATH)) {\r
+ if (Node->Header.Type != MESSAGING_DEVICE_PATH ||\r
+ Node->Header.SubType != MSG_VENDOR_DP ||\r
+ DevicePathNodeLength(&Node->Header) != sizeof(VENDOR_DEVICE_PATH)) {\r
\r
- return EFI_UNSUPPORTED;\r
+ return EFI_UNSUPPORTED;\r
\r
- }\r
- //\r
- // only supports PC ANSI, VT100, VT100+ and VT-UTF8 terminal types\r
- //\r
- if (!CompareGuid (&Node->Guid, &gEfiPcAnsiGuid) &&\r
- !CompareGuid (&Node->Guid, &gEfiVT100Guid) &&\r
- !CompareGuid (&Node->Guid, &gEfiVT100PlusGuid) &&\r
- !CompareGuid (&Node->Guid, &gEfiVTUTF8Guid)) {\r
+ }\r
+ //\r
+ // only supports PC ANSI, VT100, VT100+ and VT-UTF8 terminal types\r
+ //\r
+ if (!CompareGuid (&Node->Guid, &gEfiPcAnsiGuid) &&\r
+ !CompareGuid (&Node->Guid, &gEfiVT100Guid) &&\r
+ !CompareGuid (&Node->Guid, &gEfiVT100PlusGuid) &&\r
+ !CompareGuid (&Node->Guid, &gEfiVTUTF8Guid)) {\r
\r
- return EFI_UNSUPPORTED;\r
+ return EFI_UNSUPPORTED;\r
+ }\r
}\r
}\r
//\r
// Open the IO Abstraction(s) needed to perform the supported test\r
+ // The Controller must support the Serial I/O Protocol.\r
+ // This driver is a bus driver with at most 1 child device, so it is\r
+ // ok for it to be already started.\r
//\r
Status = gBS->OpenProtocol (\r
Controller,\r
- &gEfiDevicePathProtocolGuid,\r
- (VOID **) &ParentDevicePath,\r
+ &gEfiSerialIoProtocolGuid,\r
+ (VOID **) &SerialIo,\r
This->DriverBindingHandle,\r
Controller,\r
EFI_OPEN_PROTOCOL_BY_DRIVER\r
return Status;\r
}\r
\r
+ //\r
+ // Close the I/O Abstraction(s) used to perform the supported test\r
+ //\r
gBS->CloseProtocol (\r
Controller,\r
- &gEfiDevicePathProtocolGuid,\r
+ &gEfiSerialIoProtocolGuid,\r
This->DriverBindingHandle,\r
Controller\r
);\r
\r
//\r
- // The Controller must support the Serial I/O Protocol.\r
- // This driver is a bus driver with at most 1 child device, so it is\r
- // ok for it to be already started.\r
+ // Open the EFI Device Path protocol needed to perform the supported test\r
//\r
Status = gBS->OpenProtocol (\r
Controller,\r
- &gEfiSerialIoProtocolGuid,\r
- (VOID **) &SerialIo,\r
+ &gEfiDevicePathProtocolGuid,\r
+ (VOID **) &ParentDevicePath,\r
This->DriverBindingHandle,\r
Controller,\r
EFI_OPEN_PROTOCOL_BY_DRIVER\r
if (EFI_ERROR (Status)) {\r
return Status;\r
}\r
+\r
//\r
- // Close the I/O Abstraction(s) used to perform the supported test\r
+ // Close protocol, don't use device path protocol in the Support() function\r
//\r
gBS->CloseProtocol (\r
Controller,\r
- &gEfiSerialIoProtocolGuid,\r
+ &gEfiDevicePathProtocolGuid,\r
This->DriverBindingHandle,\r
Controller\r
);\r
return Status;\r
}\r
\r
+/**\r
+ Build the terminal device path for the child device according to the\r
+ terminal type.\r
+\r
+ @param ParentDevicePath Parent device path.\r
+ @param RemainingDevicePath A specific child device.\r
+\r
+ @return The child device path built.\r
+\r
+**/\r
+EFI_DEVICE_PATH_PROTOCOL*\r
+EFIAPI\r
+BuildTerminalDevpath (\r
+ IN EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath,\r
+ IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath\r
+ )\r
+{\r
+ EFI_DEVICE_PATH_PROTOCOL *TerminalDevicePath;\r
+ UINT8 TerminalType;\r
+ VENDOR_DEVICE_PATH *Node;\r
+ EFI_STATUS Status;\r
+\r
+ TerminalDevicePath = NULL;\r
+ TerminalType = PCANSITYPE;\r
+\r
+ //\r
+ // Use the RemainingDevicePath to determine the terminal type\r
+ //\r
+ Node = (VENDOR_DEVICE_PATH *) RemainingDevicePath;\r
+ if (Node == NULL) {\r
+ TerminalType = PCANSITYPE;\r
+\r
+ } else if (CompareGuid (&Node->Guid, &gEfiPcAnsiGuid)) {\r
+\r
+ TerminalType = PCANSITYPE;\r
+\r
+ } else if (CompareGuid (&Node->Guid, &gEfiVT100Guid)) {\r
+\r
+ TerminalType = VT100TYPE;\r
+\r
+ } else if (CompareGuid (&Node->Guid, &gEfiVT100PlusGuid)) {\r
+\r
+ TerminalType = VT100PLUSTYPE;\r
+\r
+ } else if (CompareGuid (&Node->Guid, &gEfiVTUTF8Guid)) {\r
+\r
+ TerminalType = VTUTF8TYPE;\r
+\r
+ } else {\r
+ return NULL;\r
+ }\r
+\r
+ //\r
+ // Build the device path for the child device\r
+ //\r
+ Status = SetTerminalDevicePath (\r
+ TerminalType,\r
+ ParentDevicePath,\r
+ &TerminalDevicePath\r
+ );\r
+ if (EFI_ERROR (Status)) {\r
+ return NULL;\r
+ }\r
+ return TerminalDevicePath;\r
+}\r
+\r
+/**\r
+ Compare a device path data structure to that of all the nodes of a\r
+ second device path instance.\r
+\r
+ @param Multi A pointer to a multi-instance device path data structure.\r
+ @param Single A pointer to a single-instance device path data structure.\r
+\r
+ @retval TRUE If the Single is contained within Multi.\r
+ @retval FALSE The Single is not match within Multi.\r
+\r
+**/\r
+BOOLEAN\r
+MatchDevicePaths (\r
+ IN EFI_DEVICE_PATH_PROTOCOL *Multi,\r
+ IN EFI_DEVICE_PATH_PROTOCOL *Single\r
+ )\r
+{\r
+ EFI_DEVICE_PATH_PROTOCOL *DevicePath;\r
+ EFI_DEVICE_PATH_PROTOCOL *DevicePathInst;\r
+ UINTN Size;\r
+\r
+ DevicePath = Multi;\r
+ DevicePathInst = GetNextDevicePathInstance (&DevicePath, &Size);\r
+ //\r
+ // Search for the match of 'Single' in 'Multi'\r
+ //\r
+ while (DevicePathInst != NULL) {\r
+ //\r
+ // If the single device path is found in multiple device paths,\r
+ // return success\r
+ //\r
+ if (CompareMem (Single, DevicePathInst, Size) == 0) {\r
+ FreePool (DevicePathInst);\r
+ return TRUE;\r
+ }\r
+\r
+ FreePool (DevicePathInst);\r
+ DevicePathInst = GetNextDevicePathInstance (&DevicePath, &Size);\r
+ }\r
+\r
+ return FALSE;\r
+}\r
+\r
+/**\r
+ Check whether the terminal device path is in the global variable.\r
+\r
+ @param VariableName Pointer to one global variable.\r
+ @param TerminalDevicePath Pointer to the terminal device's device path.\r
+\r
+ @retval TRUE The devcie is in the global variable.\r
+ @retval FALSE The devcie is not in the global variable.\r
+\r
+**/\r
+BOOLEAN\r
+IsTerminalInConsoleVariable (\r
+ IN CHAR16 *VariableName,\r
+ IN EFI_DEVICE_PATH_PROTOCOL *TerminalDevicePath\r
+ )\r
+{\r
+ EFI_DEVICE_PATH_PROTOCOL *Variable;\r
+ BOOLEAN ReturnFlag;\r
+\r
+ //\r
+ // Get global variable and its size according to the name given.\r
+ //\r
+ GetEfiGlobalVariable2 (VariableName, &Variable, NULL);\r
+ if (Variable == NULL) {\r
+ return FALSE;\r
+ }\r
+\r
+ //\r
+ // Check whether the terminal device path is one of the variable instances.\r
+ //\r
+ ReturnFlag = MatchDevicePaths (Variable, TerminalDevicePath);\r
+\r
+ FreePool (Variable);\r
+\r
+ return ReturnFlag;\r
+}\r
+\r
+/**\r
+ Free notify functions list.\r
+\r
+ @param ListHead The list head\r
+\r
+ @retval EFI_SUCCESS Free the notify list successfully.\r
+ @retval EFI_INVALID_PARAMETER ListHead is NULL.\r
+\r
+**/\r
+EFI_STATUS\r
+TerminalFreeNotifyList (\r
+ IN OUT LIST_ENTRY *ListHead\r
+ )\r
+{\r
+ TERMINAL_CONSOLE_IN_EX_NOTIFY *NotifyNode;\r
+\r
+ if (ListHead == NULL) {\r
+ return EFI_INVALID_PARAMETER;\r
+ }\r
+ while (!IsListEmpty (ListHead)) {\r
+ NotifyNode = CR (\r
+ ListHead->ForwardLink,\r
+ TERMINAL_CONSOLE_IN_EX_NOTIFY,\r
+ NotifyEntry,\r
+ TERMINAL_CONSOLE_IN_EX_NOTIFY_SIGNATURE\r
+ );\r
+ RemoveEntryList (ListHead->ForwardLink);\r
+ FreePool (NotifyNode);\r
+ }\r
+\r
+ return EFI_SUCCESS;\r
+}\r
+\r
+/**\r
+ Initialize all the text modes which the terminal console supports.\r
+\r
+ It returns information for available text modes that the terminal can support.\r
+\r
+ @param[out] TextModeCount The total number of text modes that terminal console supports.\r
+ @param[out] TextModeData The buffer to the text modes column and row information.\r
+ Caller is responsible to free it when it's non-NULL.\r
+\r
+ @retval EFI_SUCCESS The supporting mode information is returned.\r
+ @retval EFI_INVALID_PARAMETER The parameters are invalid.\r
+\r
+**/\r
+EFI_STATUS\r
+InitializeTerminalConsoleTextMode (\r
+ OUT UINTN *TextModeCount,\r
+ OUT TERMINAL_CONSOLE_MODE_DATA **TextModeData\r
+ )\r
+{\r
+ UINTN Index;\r
+ UINTN Count;\r
+ TERMINAL_CONSOLE_MODE_DATA *ModeBuffer;\r
+ TERMINAL_CONSOLE_MODE_DATA *NewModeBuffer;\r
+ UINTN ValidCount;\r
+ UINTN ValidIndex;\r
+ \r
+ if ((TextModeCount == NULL) || (TextModeData == NULL)) {\r
+ return EFI_INVALID_PARAMETER;\r
+ }\r
+ \r
+ Count = sizeof (mTerminalConsoleModeData) / sizeof (TERMINAL_CONSOLE_MODE_DATA);\r
+ \r
+ //\r
+ // Get defined mode buffer pointer.\r
+ //\r
+ ModeBuffer = mTerminalConsoleModeData;\r
+ \r
+ //\r
+ // Here we make sure that the final mode exposed does not include the duplicated modes,\r
+ // and does not include the invalid modes which exceed the max column and row.\r
+ // Reserve 2 modes for 80x25, 80x50 of terminal console.\r
+ //\r
+ NewModeBuffer = AllocateZeroPool (sizeof (TERMINAL_CONSOLE_MODE_DATA) * (Count + 2));\r
+ ASSERT (NewModeBuffer != NULL);\r
+\r
+ //\r
+ // Mode 0 and mode 1 is for 80x25, 80x50 according to UEFI spec.\r
+ //\r
+ ValidCount = 0; \r
+\r
+ NewModeBuffer[ValidCount].Columns = 80;\r
+ NewModeBuffer[ValidCount].Rows = 25;\r
+ ValidCount++;\r
+\r
+ NewModeBuffer[ValidCount].Columns = 80;\r
+ NewModeBuffer[ValidCount].Rows = 50;\r
+ ValidCount++;\r
+ \r
+ //\r
+ // Start from mode 2 to put the valid mode other than 80x25 and 80x50 in the output mode buffer.\r
+ //\r
+ for (Index = 0; Index < Count; Index++) {\r
+ if ((ModeBuffer[Index].Columns == 0) || (ModeBuffer[Index].Rows == 0)) {\r
+ //\r
+ // Skip the pre-defined mode which is invalid.\r
+ //\r
+ continue;\r
+ }\r
+ for (ValidIndex = 0; ValidIndex < ValidCount; ValidIndex++) {\r
+ if ((ModeBuffer[Index].Columns == NewModeBuffer[ValidIndex].Columns) &&\r
+ (ModeBuffer[Index].Rows == NewModeBuffer[ValidIndex].Rows)) {\r
+ //\r
+ // Skip the duplicated mode.\r
+ //\r
+ break;\r
+ }\r
+ }\r
+ if (ValidIndex == ValidCount) {\r
+ NewModeBuffer[ValidCount].Columns = ModeBuffer[Index].Columns;\r
+ NewModeBuffer[ValidCount].Rows = ModeBuffer[Index].Rows;\r
+ ValidCount++;\r
+ }\r
+ }\r
+ \r
+ DEBUG_CODE (\r
+ for (Index = 0; Index < ValidCount; Index++) {\r
+ DEBUG ((EFI_D_INFO, "Terminal - Mode %d, Column = %d, Row = %d\n", \r
+ Index, NewModeBuffer[Index].Columns, NewModeBuffer[Index].Rows)); \r
+ }\r
+ );\r
+ \r
+ //\r
+ // Return valid mode count and mode information buffer.\r
+ //\r
+ *TextModeCount = ValidCount;\r
+ *TextModeData = NewModeBuffer;\r
+ return EFI_SUCCESS;\r
+}\r
+\r
/**\r
Start this driver on Controller by opening a Serial IO protocol,\r
reading Device Path, and creating a child handle with a Simple Text In,\r
UINTN Index;\r
EFI_DEVICE_PATH_PROTOCOL *DevicePath;\r
EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL *SimpleTextOutput;\r
-\r
- TerminalDevice = NULL;\r
- DefaultNode = NULL;\r
+ EFI_SIMPLE_TEXT_INPUT_PROTOCOL *SimpleTextInput;\r
+ BOOLEAN ConInSelected;\r
+ BOOLEAN ConOutSelected;\r
+ BOOLEAN NullRemaining;\r
+ BOOLEAN SimTxtInInstalled;\r
+ BOOLEAN SimTxtOutInstalled;\r
+ BOOLEAN FirstEnter;\r
+ UINTN ModeCount;\r
+\r
+ TerminalDevice = NULL;\r
+ DefaultNode = NULL;\r
+ ConInSelected = FALSE;\r
+ ConOutSelected = FALSE;\r
+ NullRemaining = TRUE;\r
+ SimTxtInInstalled = FALSE;\r
+ SimTxtOutInstalled = FALSE;\r
+ FirstEnter = FALSE;\r
//\r
// Get the Device Path Protocol to build the device path of the child device\r
//\r
\r
if (Status != EFI_ALREADY_STARTED) {\r
//\r
- // If Serial I/O is not already open by this driver, then tag the handle\r
- // with the Terminal Driver GUID and update the ConInDev, ConOutDev, and\r
- // StdErrDev variables with the list of possible terminal types on this\r
- // serial port.\r
+ // the serial I/O protocol never be opened before, it is the first\r
+ // time to start the serial Io controller\r
//\r
- Status = gBS->OpenProtocol (\r
- Controller,\r
+ FirstEnter = TRUE;\r
+ }\r
+\r
+ //\r
+ // Serial I/O is not already open by this driver, then tag the handle\r
+ // with the Terminal Driver GUID and update the ConInDev, ConOutDev, and\r
+ // StdErrDev variables with the list of possible terminal types on this\r
+ // serial port.\r
+ //\r
+ Status = gBS->OpenProtocol (\r
+ Controller,\r
+ &gEfiCallerIdGuid,\r
+ NULL,\r
+ This->DriverBindingHandle,\r
+ Controller,\r
+ EFI_OPEN_PROTOCOL_TEST_PROTOCOL\r
+ );\r
+ if (EFI_ERROR (Status)) {\r
+ Status = gBS->InstallMultipleProtocolInterfaces (\r
+ &Controller,\r
&gEfiCallerIdGuid,\r
- NULL,\r
- This->DriverBindingHandle,\r
- Controller,\r
- EFI_OPEN_PROTOCOL_TEST_PROTOCOL\r
+ DuplicateDevicePath (ParentDevicePath),\r
+ NULL\r
);\r
if (EFI_ERROR (Status)) {\r
- Status = gBS->InstallMultipleProtocolInterfaces (\r
- &Controller,\r
- &gEfiCallerIdGuid,\r
- DuplicateDevicePath (ParentDevicePath),\r
- NULL\r
- );\r
- if (EFI_ERROR (Status)) {\r
- goto Error;\r
- }\r
+ goto Error;\r
+ }\r
+\r
+ if (!IsHotPlugDevice (ParentDevicePath)) {\r
//\r
// if the serial device is a hot plug device, do not update the\r
// ConInDev, ConOutDev, and StdErrDev variables.\r
//\r
- Status = gBS->OpenProtocol (\r
- Controller,\r
- &gEfiHotPlugDeviceGuid,\r
- NULL,\r
- This->DriverBindingHandle,\r
- Controller,\r
- EFI_OPEN_PROTOCOL_TEST_PROTOCOL\r
- );\r
- if (EFI_ERROR (Status)) {\r
- TerminalUpdateConsoleDevVariable (L"ConInDev", ParentDevicePath);\r
- TerminalUpdateConsoleDevVariable (L"ConOutDev", ParentDevicePath);\r
- TerminalUpdateConsoleDevVariable (L"ErrOutDev", ParentDevicePath);\r
- }\r
+ TerminalUpdateConsoleDevVariable (L"ConInDev", ParentDevicePath);\r
+ TerminalUpdateConsoleDevVariable (L"ConOutDev", ParentDevicePath);\r
+ TerminalUpdateConsoleDevVariable (L"ErrOutDev", ParentDevicePath);\r
}\r
}\r
+\r
//\r
- // Make sure a child handle does not already exist. This driver can only\r
- // produce one child per serial port.\r
+ // Check the requirement for the SimpleTxtIn and SimpleTxtOut protocols\r
//\r
- Status = gBS->OpenProtocolInformation (\r
- Controller,\r
- &gEfiSerialIoProtocolGuid,\r
- &OpenInfoBuffer,\r
- &EntryCount\r
- );\r
- if (!EFI_ERROR (Status)) {\r
- Status = EFI_SUCCESS;\r
- for (Index = 0; Index < EntryCount; Index++) {\r
- if (OpenInfoBuffer[Index].Attributes & EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER) {\r
- Status = EFI_ALREADY_STARTED;\r
- }\r
- }\r
+ // Simple In/Out Protocol will not be installed onto the handle if the\r
+ // device path to the handle is not present in the ConIn/ConOut\r
+ // environment variable. But If RemainingDevicePath is NULL, then always\r
+ // produce both Simple In and Simple Text Output Protocols. This is required\r
+ // for the connect all sequences to make sure all possible consoles are\r
+ // produced no matter what the current values of ConIn, ConOut, or StdErr are.\r
+ //\r
+ if (RemainingDevicePath == NULL) {\r
+ NullRemaining = TRUE;\r
+ }\r
\r
- FreePool (OpenInfoBuffer);\r
- if (EFI_ERROR (Status)) {\r
- return Status;\r
- }\r
+ DevicePath = BuildTerminalDevpath (ParentDevicePath, RemainingDevicePath);\r
+ if (DevicePath != NULL) {\r
+ ConInSelected = IsTerminalInConsoleVariable (L"ConIn", DevicePath);\r
+ ConOutSelected = IsTerminalInConsoleVariable (L"ConOut", DevicePath);\r
+ FreePool (DevicePath);\r
+ } else {\r
+ goto Error;\r
}\r
//\r
- // If RemainingDevicePath is NULL, then create default device path node\r
+ // Not create the child terminal handle if both Simple In/In Ex and\r
+ // Simple text Out protocols are not required to be published\r
//\r
- if (RemainingDevicePath == NULL) {\r
- DefaultNode = AllocateZeroPool (sizeof (VENDOR_DEVICE_PATH));\r
- if (DefaultNode == NULL) {\r
+ if ((!ConInSelected)&&(!ConOutSelected)&&(!NullRemaining)) {\r
+ goto Error;\r
+ }\r
+\r
+ //\r
+ // create the child terminal handle during first entry\r
+ //\r
+ if (FirstEnter) {\r
+ //\r
+ // First enther the start funciton\r
+ //\r
+ FirstEnter = FALSE;\r
+ //\r
+ // Make sure a child handle does not already exist. This driver can only\r
+ // produce one child per serial port.\r
+ //\r
+ Status = gBS->OpenProtocolInformation (\r
+ Controller,\r
+ &gEfiSerialIoProtocolGuid,\r
+ &OpenInfoBuffer,\r
+ &EntryCount\r
+ );\r
+ if (!EFI_ERROR (Status)) {\r
+ Status = EFI_SUCCESS;\r
+ for (Index = 0; Index < EntryCount; Index++) {\r
+ if ((OpenInfoBuffer[Index].Attributes & EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER) != 0) {\r
+ Status = EFI_ALREADY_STARTED;\r
+ }\r
+ }\r
+\r
+ FreePool (OpenInfoBuffer);\r
+ if (EFI_ERROR (Status)) {\r
+ goto Error;\r
+ }\r
+ }\r
+\r
+ //\r
+ // If RemainingDevicePath is NULL, then create default device path node\r
+ //\r
+ if (RemainingDevicePath == NULL) {\r
+ DefaultNode = AllocateZeroPool (sizeof (VENDOR_DEVICE_PATH));\r
+ if (DefaultNode == NULL) {\r
+ Status = EFI_OUT_OF_RESOURCES;\r
+ goto Error;\r
+ }\r
+\r
+ TerminalType = PcdGet8 (PcdDefaultTerminalType);\r
+ //\r
+ // Must be between PCANSITYPE (0) and VTUTF8TYPE (3)\r
+ //\r
+ ASSERT (TerminalType <= VTUTF8TYPE);\r
+\r
+ CopyMem (&DefaultNode->Guid, gTerminalType[TerminalType], sizeof (EFI_GUID));\r
+ RemainingDevicePath = (EFI_DEVICE_PATH_PROTOCOL *) DefaultNode;\r
+ } else if (!IsDevicePathEnd (RemainingDevicePath)) {\r
+ //\r
+ // If RemainingDevicePath isn't the End of Device Path Node,\r
+ // Use the RemainingDevicePath to determine the terminal type\r
+ //\r
+ Node = (VENDOR_DEVICE_PATH *)RemainingDevicePath;\r
+ if (CompareGuid (&Node->Guid, &gEfiPcAnsiGuid)) {\r
+ TerminalType = PCANSITYPE;\r
+ } else if (CompareGuid (&Node->Guid, &gEfiVT100Guid)) {\r
+ TerminalType = VT100TYPE;\r
+ } else if (CompareGuid (&Node->Guid, &gEfiVT100PlusGuid)) {\r
+ TerminalType = VT100PLUSTYPE;\r
+ } else if (CompareGuid (&Node->Guid, &gEfiVTUTF8Guid)) {\r
+ TerminalType = VTUTF8TYPE;\r
+ } else {\r
+ goto Error;\r
+ }\r
+ } else {\r
+ //\r
+ // If RemainingDevicePath is the End of Device Path Node,\r
+ // skip enumerate any device and return EFI_SUCESSS\r
+ //\r
+ return EFI_SUCCESS;\r
+ }\r
+\r
+ //\r
+ // Initialize the Terminal Dev\r
+ //\r
+ TerminalDevice = AllocateCopyPool (sizeof (TERMINAL_DEV), &mTerminalDevTemplate);\r
+ if (TerminalDevice == NULL) {\r
Status = EFI_OUT_OF_RESOURCES;\r
goto Error;\r
}\r
\r
- TerminalType = FixedPcdGet8 (PcdDefaultTerminalType);\r
+ TerminalDevice->TerminalType = TerminalType;\r
+ TerminalDevice->SerialIo = SerialIo;\r
+\r
+ InitializeListHead (&TerminalDevice->NotifyList);\r
+ Status = gBS->CreateEvent (\r
+ EVT_NOTIFY_WAIT,\r
+ TPL_NOTIFY,\r
+ TerminalConInWaitForKeyEx,\r
+ TerminalDevice,\r
+ &TerminalDevice->SimpleInputEx.WaitForKeyEx\r
+ );\r
+ if (EFI_ERROR (Status)) {\r
+ goto Error;\r
+ }\r
+\r
+ Status = gBS->CreateEvent (\r
+ EVT_NOTIFY_WAIT,\r
+ TPL_NOTIFY,\r
+ TerminalConInWaitForKey,\r
+ TerminalDevice,\r
+ &TerminalDevice->SimpleInput.WaitForKey\r
+ );\r
+ if (EFI_ERROR (Status)) {\r
+ goto Error;\r
+ }\r
//\r
- // Must be between PCANSITYPE (0) and VTUTF8TYPE (3)\r
+ // Allocates and initializes the FIFO buffer to be zero, used for accommodating\r
+ // the pre-read pending characters.\r
//\r
- ASSERT (TerminalType <= VTUTF8TYPE);\r
+ TerminalDevice->RawFiFo = AllocateZeroPool (sizeof (RAW_DATA_FIFO));\r
+ if (TerminalDevice->RawFiFo == NULL) {\r
+ goto Error;\r
+ }\r
+ TerminalDevice->UnicodeFiFo = AllocateZeroPool (sizeof (UNICODE_FIFO));\r
+ if (TerminalDevice->UnicodeFiFo == NULL) {\r
+ goto Error;\r
+ }\r
+ TerminalDevice->EfiKeyFiFo = AllocateZeroPool (sizeof (EFI_KEY_FIFO));\r
+ if (TerminalDevice->EfiKeyFiFo == NULL) {\r
+ goto Error;\r
+ }\r
\r
- CopyMem (&DefaultNode->Guid, gTerminalType[TerminalType], sizeof (EFI_GUID));\r
- RemainingDevicePath = (EFI_DEVICE_PATH_PROTOCOL *) DefaultNode;\r
- } else {\r
//\r
- // Use the RemainingDevicePath to determine the terminal type\r
+ // Set the timeout value of serial buffer for\r
+ // keystroke response performance issue\r
//\r
- Node = (VENDOR_DEVICE_PATH *)RemainingDevicePath;\r
- if (CompareGuid (&Node->Guid, &gEfiPcAnsiGuid)) {\r
- TerminalType = PCANSITYPE;\r
- } else if (CompareGuid (&Node->Guid, &gEfiVT100Guid)) {\r
- TerminalType = VT100TYPE;\r
- } else if (CompareGuid (&Node->Guid, &gEfiVT100PlusGuid)) {\r
- TerminalType = VT100PLUSTYPE;\r
- } else if (CompareGuid (&Node->Guid, &gEfiVTUTF8Guid)) {\r
- TerminalType = VTUTF8TYPE;\r
+ Mode = TerminalDevice->SerialIo->Mode;\r
+\r
+ SerialInTimeOut = 0;\r
+ if (Mode->BaudRate != 0) {\r
+ SerialInTimeOut = (1 + Mode->DataBits + Mode->StopBits) * 2 * 1000000 / (UINTN) Mode->BaudRate;\r
+ }\r
+\r
+ Status = TerminalDevice->SerialIo->SetAttributes (\r
+ TerminalDevice->SerialIo,\r
+ Mode->BaudRate,\r
+ Mode->ReceiveFifoDepth,\r
+ (UINT32) SerialInTimeOut,\r
+ (EFI_PARITY_TYPE) (Mode->Parity),\r
+ (UINT8) Mode->DataBits,\r
+ (EFI_STOP_BITS_TYPE) (Mode->StopBits)\r
+ );\r
+ if (EFI_ERROR (Status)) {\r
+ //\r
+ // if set attributes operation fails, invalidate\r
+ // the value of SerialInTimeOut,thus make it\r
+ // inconsistent with the default timeout value\r
+ // of serial buffer. This will invoke the recalculation\r
+ // in the readkeystroke routine.\r
+ //\r
+ TerminalDevice->SerialInTimeOut = 0;\r
} else {\r
- goto Error;\r
+ TerminalDevice->SerialInTimeOut = SerialInTimeOut;\r
+ }\r
+ //\r
+ // Set Simple Text Output Protocol from template.\r
+ //\r
+ SimpleTextOutput = CopyMem (\r
+ &TerminalDevice->SimpleTextOutput,\r
+ &mTerminalDevTemplate.SimpleTextOutput,\r
+ sizeof (mTerminalDevTemplate.SimpleTextOutput)\r
+ );\r
+ SimpleTextOutput->Mode = &TerminalDevice->SimpleTextOutputMode;\r
+ \r
+ Status = InitializeTerminalConsoleTextMode (&ModeCount, &TerminalDevice->TerminalConsoleModeData);\r
+ if (EFI_ERROR (Status)) {\r
+ goto ReportError;\r
+ }\r
+ TerminalDevice->SimpleTextOutputMode.MaxMode = (INT32) ModeCount;\r
+ \r
+ //\r
+ // For terminal devices, cursor is always visible\r
+ //\r
+ TerminalDevice->SimpleTextOutputMode.CursorVisible = TRUE;\r
+ Status = TerminalConOutSetAttribute (\r
+ SimpleTextOutput,\r
+ EFI_TEXT_ATTR (EFI_LIGHTGRAY, EFI_BLACK)\r
+ );\r
+ if (EFI_ERROR (Status)) {\r
+ goto ReportError;\r
}\r
- }\r
\r
- //\r
- // Initialize the Terminal Dev\r
- //\r
- TerminalDevice = AllocateCopyPool (sizeof (TERMINAL_DEV), &mTerminalDevTemplate);\r
- if (TerminalDevice == NULL) {\r
- Status = EFI_OUT_OF_RESOURCES;\r
- goto Error;\r
- }\r
+ //\r
+ // Build the component name for the child device\r
+ //\r
+ TerminalDevice->ControllerNameTable = NULL;\r
+ switch (TerminalDevice->TerminalType) {\r
+ case PCANSITYPE:\r
+ AddUnicodeString2 (\r
+ "eng",\r
+ gTerminalComponentName.SupportedLanguages,\r
+ &TerminalDevice->ControllerNameTable,\r
+ (CHAR16 *)L"PC-ANSI Serial Console",\r
+ TRUE\r
+ );\r
+ AddUnicodeString2 (\r
+ "en",\r
+ gTerminalComponentName2.SupportedLanguages,\r
+ &TerminalDevice->ControllerNameTable,\r
+ (CHAR16 *)L"PC-ANSI Serial Console",\r
+ FALSE\r
+ );\r
\r
- TerminalDevice->TerminalType = TerminalType;\r
- TerminalDevice->SerialIo = SerialIo;\r
+ break;\r
\r
- InitializeListHead (&TerminalDevice->NotifyList);\r
- Status = gBS->CreateEvent (\r
- EVT_NOTIFY_WAIT,\r
- TPL_NOTIFY,\r
- TerminalConInWaitForKeyEx,\r
- &TerminalDevice->SimpleInputEx,\r
- &TerminalDevice->SimpleInputEx.WaitForKeyEx\r
- );\r
- if (EFI_ERROR (Status)) {\r
- goto Error;\r
- }\r
+ case VT100TYPE:\r
+ AddUnicodeString2 (\r
+ "eng",\r
+ gTerminalComponentName.SupportedLanguages,\r
+ &TerminalDevice->ControllerNameTable,\r
+ (CHAR16 *)L"VT-100 Serial Console",\r
+ TRUE\r
+ );\r
+ AddUnicodeString2 (\r
+ "en",\r
+ gTerminalComponentName2.SupportedLanguages,\r
+ &TerminalDevice->ControllerNameTable,\r
+ (CHAR16 *)L"VT-100 Serial Console",\r
+ FALSE\r
+ );\r
\r
+ break;\r
\r
- Status = gBS->CreateEvent (\r
- EVT_NOTIFY_WAIT,\r
- TPL_NOTIFY,\r
- TerminalConInWaitForKey,\r
- &TerminalDevice->SimpleInput,\r
- &TerminalDevice->SimpleInput.WaitForKey\r
- );\r
- if (EFI_ERROR (Status)) {\r
- goto Error;\r
- }\r
- //\r
- // initialize the FIFO buffer used for accommodating\r
- // the pre-read pending characters\r
- //\r
- InitializeRawFiFo (TerminalDevice);\r
- InitializeUnicodeFiFo (TerminalDevice);\r
- InitializeEfiKeyFiFo (TerminalDevice);\r
+ case VT100PLUSTYPE:\r
+ AddUnicodeString2 (\r
+ "eng",\r
+ gTerminalComponentName.SupportedLanguages,\r
+ &TerminalDevice->ControllerNameTable,\r
+ (CHAR16 *)L"VT-100+ Serial Console",\r
+ TRUE\r
+ );\r
+ AddUnicodeString2 (\r
+ "en",\r
+ gTerminalComponentName2.SupportedLanguages,\r
+ &TerminalDevice->ControllerNameTable,\r
+ (CHAR16 *)L"VT-100+ Serial Console",\r
+ FALSE\r
+ );\r
\r
- //\r
- // Set the timeout value of serial buffer for\r
- // keystroke response performance issue\r
- //\r
- Mode = TerminalDevice->SerialIo->Mode;\r
+ break;\r
\r
- SerialInTimeOut = 0;\r
- if (Mode->BaudRate != 0) {\r
- SerialInTimeOut = (1 + Mode->DataBits + Mode->StopBits) * 2 * 1000000 / (UINTN) Mode->BaudRate;\r
- }\r
+ case VTUTF8TYPE:\r
+ AddUnicodeString2 (\r
+ "eng",\r
+ gTerminalComponentName.SupportedLanguages,\r
+ &TerminalDevice->ControllerNameTable,\r
+ (CHAR16 *)L"VT-UTF8 Serial Console",\r
+ TRUE\r
+ );\r
+ AddUnicodeString2 (\r
+ "en",\r
+ gTerminalComponentName2.SupportedLanguages,\r
+ &TerminalDevice->ControllerNameTable,\r
+ (CHAR16 *)L"VT-UTF8 Serial Console",\r
+ FALSE\r
+ );\r
+\r
+ break;\r
+ }\r
\r
- Status = TerminalDevice->SerialIo->SetAttributes (\r
- TerminalDevice->SerialIo,\r
- Mode->BaudRate,\r
- Mode->ReceiveFifoDepth,\r
- (UINT32) SerialInTimeOut,\r
- (EFI_PARITY_TYPE) (Mode->Parity),\r
- (UINT8) Mode->DataBits,\r
- (EFI_STOP_BITS_TYPE) (Mode->StopBits)\r
- );\r
- if (EFI_ERROR (Status)) {\r
//\r
- // if set attributes operation fails, invalidate\r
- // the value of SerialInTimeOut,thus make it\r
- // inconsistent with the default timeout value\r
- // of serial buffer. This will invoke the recalculation\r
- // in the readkeystroke routine.\r
+ // Build the device path for the child device\r
//\r
- TerminalDevice->SerialInTimeOut = 0;\r
- } else {\r
- TerminalDevice->SerialInTimeOut = SerialInTimeOut;\r
- }\r
- //\r
- // Build the device path for the child device\r
- //\r
- Status = SetTerminalDevicePath (\r
- TerminalDevice->TerminalType,\r
- ParentDevicePath,\r
- &TerminalDevice->DevicePath\r
- );\r
- if (EFI_ERROR (Status)) {\r
- goto Error;\r
- }\r
+ Status = SetTerminalDevicePath (\r
+ TerminalDevice->TerminalType,\r
+ ParentDevicePath,\r
+ &TerminalDevice->DevicePath\r
+ );\r
+ if (EFI_ERROR (Status)) {\r
+ goto Error;\r
+ }\r
\r
- DevicePath = TerminalDevice->DevicePath;\r
+ Status = TerminalConOutReset (SimpleTextOutput, FALSE);\r
+ if (EFI_ERROR (Status)) {\r
+ goto ReportError;\r
+ }\r
+\r
+ Status = TerminalConOutSetMode (SimpleTextOutput, 0);\r
+ if (EFI_ERROR (Status)) {\r
+ goto ReportError;\r
+ }\r
+\r
+ Status = TerminalConOutEnableCursor (SimpleTextOutput, TRUE);\r
+ if (EFI_ERROR (Status)) {\r
+ goto ReportError;\r
+ }\r
+\r
+ Status = gBS->CreateEvent (\r
+ EVT_TIMER | EVT_NOTIFY_SIGNAL,\r
+ TPL_NOTIFY,\r
+ TerminalConInTimerHandler,\r
+ TerminalDevice,\r
+ &TerminalDevice->TimerEvent\r
+ );\r
+ ASSERT_EFI_ERROR (Status);\r
+\r
+ Status = gBS->SetTimer (\r
+ TerminalDevice->TimerEvent,\r
+ TimerPeriodic,\r
+ KEYBOARD_TIMER_INTERVAL\r
+ );\r
+ ASSERT_EFI_ERROR (Status);\r
+\r
+ Status = gBS->CreateEvent (\r
+ EVT_TIMER,\r
+ TPL_CALLBACK,\r
+ NULL,\r
+ NULL,\r
+ &TerminalDevice->TwoSecondTimeOut\r
+ );\r
+ ASSERT_EFI_ERROR (Status);\r
+\r
+ Status = gBS->InstallProtocolInterface (\r
+ &TerminalDevice->Handle,\r
+ &gEfiDevicePathProtocolGuid,\r
+ EFI_NATIVE_INTERFACE,\r
+ TerminalDevice->DevicePath\r
+ );\r
+ if (EFI_ERROR (Status)) {\r
+ goto Error;\r
+ }\r
\r
- Status = TerminalDevice->SimpleInput.Reset (\r
- &TerminalDevice->SimpleInput,\r
- FALSE\r
- );\r
- if (EFI_ERROR (Status)) {\r
//\r
- // Need to report Error Code first\r
+ // Register the Parent-Child relationship via\r
+ // EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER.\r
//\r
- goto ReportError;\r
+ Status = gBS->OpenProtocol (\r
+ Controller,\r
+ &gEfiSerialIoProtocolGuid,\r
+ (VOID **) &TerminalDevice->SerialIo,\r
+ This->DriverBindingHandle,\r
+ TerminalDevice->Handle,\r
+ EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER\r
+ );\r
+ if (EFI_ERROR (Status)) {\r
+ goto Error;\r
+ }\r
}\r
- //\r
- // Set Simple Text Output Protocol from template.\r
- //\r
- SimpleTextOutput = CopyMem (\r
- &TerminalDevice->SimpleTextOutput,\r
- &mTerminalDevTemplate.SimpleTextOutput,\r
- sizeof (mTerminalDevTemplate.SimpleTextOutput)\r
- );\r
- SimpleTextOutput->Mode = &TerminalDevice->SimpleTextOutputMode;\r
\r
- TerminalDevice->SimpleTextOutputMode.MaxMode = 3;\r
//\r
- // For terminal devices, cursor is always visible\r
+ // Find the child handle, and get its TerminalDevice private data\r
//\r
- TerminalDevice->SimpleTextOutputMode.CursorVisible = TRUE;\r
- Status = TerminalConOutSetAttribute (\r
- SimpleTextOutput,\r
- EFI_TEXT_ATTR (EFI_LIGHTGRAY, EFI_BLACK)\r
- );\r
- if (EFI_ERROR (Status)) {\r
- goto ReportError;\r
- }\r
+ Status = gBS->OpenProtocolInformation (\r
+ Controller,\r
+ &gEfiSerialIoProtocolGuid,\r
+ &OpenInfoBuffer,\r
+ &EntryCount\r
+ );\r
+ if (!EFI_ERROR (Status)) {\r
+ Status = EFI_NOT_FOUND;\r
+ ASSERT (OpenInfoBuffer != NULL);\r
+ for (Index = 0; Index < EntryCount; Index++) {\r
+ if ((OpenInfoBuffer[Index].Attributes & EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER) != 0) {\r
+ //\r
+ // Find the child terminal handle.\r
+ // Test whether the SimpleTxtIn and SimpleTxtOut have been published\r
+ //\r
+ Status = gBS->OpenProtocol (\r
+ OpenInfoBuffer[Index].ControllerHandle,\r
+ &gEfiSimpleTextInProtocolGuid,\r
+ (VOID **) &SimpleTextInput,\r
+ This->DriverBindingHandle,\r
+ OpenInfoBuffer[Index].ControllerHandle,\r
+ EFI_OPEN_PROTOCOL_GET_PROTOCOL\r
+ );\r
+ if (!EFI_ERROR (Status)) {\r
+ SimTxtInInstalled = TRUE;\r
+ TerminalDevice = TERMINAL_CON_IN_DEV_FROM_THIS (SimpleTextInput);\r
+ }\r
\r
- Status = TerminalConOutReset (SimpleTextOutput, FALSE);\r
- if (EFI_ERROR (Status)) {\r
- goto ReportError;\r
- }\r
+ Status = gBS->OpenProtocol (\r
+ OpenInfoBuffer[Index].ControllerHandle,\r
+ &gEfiSimpleTextOutProtocolGuid,\r
+ (VOID **) &SimpleTextOutput,\r
+ This->DriverBindingHandle,\r
+ OpenInfoBuffer[Index].ControllerHandle,\r
+ EFI_OPEN_PROTOCOL_GET_PROTOCOL\r
+ );\r
+ if (!EFI_ERROR (Status)) {\r
+ SimTxtOutInstalled = TRUE;\r
+ TerminalDevice = TERMINAL_CON_OUT_DEV_FROM_THIS (SimpleTextOutput);\r
+ }\r
+ Status = EFI_SUCCESS;\r
+ break;\r
+ }\r
+ }\r
\r
- Status = TerminalConOutSetMode (SimpleTextOutput, 0);\r
- if (EFI_ERROR (Status)) {\r
+ FreePool (OpenInfoBuffer);\r
+ if (EFI_ERROR (Status)) {\r
+ goto ReportError;\r
+ }\r
+ } else {\r
goto ReportError;\r
}\r
\r
- Status = TerminalConOutEnableCursor (SimpleTextOutput, TRUE);\r
- if (EFI_ERROR (Status)) {\r
- goto ReportError;\r
+ ASSERT (TerminalDevice != NULL);\r
+ //\r
+ // Only do the reset if the device path is in the Conout variable\r
+ //\r
+ if (ConInSelected && !SimTxtInInstalled) {\r
+ Status = TerminalDevice->SimpleInput.Reset (\r
+ &TerminalDevice->SimpleInput,\r
+ FALSE\r
+ );\r
+ if (EFI_ERROR (Status)) {\r
+ //\r
+ // Need to report Error Code first\r
+ //\r
+ goto ReportError;\r
+ }\r
}\r
\r
- Status = gBS->CreateEvent (\r
- EVT_TIMER,\r
- TPL_CALLBACK,\r
- NULL,\r
- NULL,\r
- &TerminalDevice->TwoSecondTimeOut\r
- );\r
-\r
//\r
- // Build the component name for the child device\r
+ // Only output the configure string to remote terminal if the device path\r
+ // is in the Conout variable\r
//\r
- TerminalDevice->ControllerNameTable = NULL;\r
- switch (TerminalDevice->TerminalType) {\r
- case PCANSITYPE:\r
- AddUnicodeString2 (\r
- "eng",\r
- gTerminalComponentName.SupportedLanguages,\r
- &TerminalDevice->ControllerNameTable,\r
- (CHAR16 *)L"PC-ANSI Serial Console",\r
- TRUE\r
- );\r
- AddUnicodeString2 (\r
- "en",\r
- gTerminalComponentName2.SupportedLanguages,\r
- &TerminalDevice->ControllerNameTable,\r
- (CHAR16 *)L"PC-ANSI Serial Console",\r
- FALSE\r
- );\r
-\r
- break;\r
-\r
- case VT100TYPE:\r
- AddUnicodeString2 (\r
- "eng",\r
- gTerminalComponentName.SupportedLanguages,\r
- &TerminalDevice->ControllerNameTable,\r
- (CHAR16 *)L"VT-100 Serial Console",\r
- TRUE\r
- );\r
- AddUnicodeString2 (\r
- "en",\r
- gTerminalComponentName2.SupportedLanguages,\r
- &TerminalDevice->ControllerNameTable,\r
- (CHAR16 *)L"VT-100 Serial Console",\r
- FALSE\r
- );\r
-\r
- break;\r
-\r
- case VT100PLUSTYPE:\r
- AddUnicodeString2 (\r
- "eng",\r
- gTerminalComponentName.SupportedLanguages,\r
- &TerminalDevice->ControllerNameTable,\r
- (CHAR16 *)L"VT-100+ Serial Console",\r
- TRUE\r
- );\r
- AddUnicodeString2 (\r
- "en",\r
- gTerminalComponentName2.SupportedLanguages,\r
- &TerminalDevice->ControllerNameTable,\r
- (CHAR16 *)L"VT-100+ Serial Console",\r
- FALSE\r
- );\r
+ if (ConOutSelected && !SimTxtOutInstalled) {\r
+ Status = TerminalDevice->SimpleTextOutput.SetAttribute (\r
+ &TerminalDevice->SimpleTextOutput,\r
+ EFI_TEXT_ATTR (EFI_LIGHTGRAY, EFI_BLACK)\r
+ );\r
+ if (EFI_ERROR (Status)) {\r
+ goto ReportError;\r
+ }\r
\r
- break;\r
+ Status = TerminalDevice->SimpleTextOutput.Reset (\r
+ &TerminalDevice->SimpleTextOutput,\r
+ FALSE\r
+ );\r
+ if (EFI_ERROR (Status)) {\r
+ goto ReportError;\r
+ }\r
\r
- case VTUTF8TYPE:\r
- AddUnicodeString2 (\r
- "eng",\r
- gTerminalComponentName.SupportedLanguages,\r
- &TerminalDevice->ControllerNameTable,\r
- (CHAR16 *)L"VT-UTF8 Serial Console",\r
- TRUE\r
- );\r
- AddUnicodeString2 (\r
- "en",\r
- gTerminalComponentName2.SupportedLanguages,\r
- &TerminalDevice->ControllerNameTable,\r
- (CHAR16 *)L"VT-UTF8 Serial Console",\r
- FALSE\r
- );\r
+ Status = TerminalDevice->SimpleTextOutput.SetMode (\r
+ &TerminalDevice->SimpleTextOutput,\r
+ 0\r
+ );\r
+ if (EFI_ERROR (Status)) {\r
+ goto ReportError;\r
+ }\r
\r
- break;\r
- }\r
- //\r
- // Install protocol interfaces for the serial device.\r
- //\r
- Status = gBS->InstallMultipleProtocolInterfaces (\r
- &TerminalDevice->Handle,\r
- &gEfiDevicePathProtocolGuid,\r
- TerminalDevice->DevicePath,\r
- &gEfiSimpleTextInProtocolGuid,\r
- &TerminalDevice->SimpleInput,\r
- &gEfiSimpleTextInputExProtocolGuid,\r
- &TerminalDevice->SimpleInputEx,\r
- &gEfiSimpleTextOutProtocolGuid,\r
- &TerminalDevice->SimpleTextOutput,\r
- NULL\r
- );\r
- if (EFI_ERROR (Status)) {\r
- goto Error;\r
+ Status = TerminalDevice->SimpleTextOutput.EnableCursor (\r
+ &TerminalDevice->SimpleTextOutput,\r
+ TRUE\r
+ );\r
+ if (EFI_ERROR (Status)) {\r
+ goto ReportError;\r
+ }\r
}\r
+\r
//\r
- // if the serial device is a hot plug device, attaches the HotPlugGuid\r
- // onto the terminal device handle.\r
+ // Simple In/Out Protocol will not be installed onto the handle if the\r
+ // device path to the handle is not present in the ConIn/ConOut\r
+ // environment variable. But If RemainingDevicePath is NULL, then always\r
+ // produce both Simple In and Simple Text Output Protocols. This is required\r
+ // for the connect all sequences to make sure all possible consoles are\r
+ // produced no matter what the current values of ConIn, ConOut, or StdErr are.\r
//\r
- Status = gBS->OpenProtocol (\r
- Controller,\r
- &gEfiHotPlugDeviceGuid,\r
- NULL,\r
- This->DriverBindingHandle,\r
- Controller,\r
- EFI_OPEN_PROTOCOL_TEST_PROTOCOL\r
- );\r
- if (!EFI_ERROR (Status)) {\r
+ if (!SimTxtInInstalled && (ConInSelected || NullRemaining)) {\r
Status = gBS->InstallMultipleProtocolInterfaces (\r
&TerminalDevice->Handle,\r
- &gEfiHotPlugDeviceGuid,\r
- NULL,\r
+ &gEfiSimpleTextInProtocolGuid,\r
+ &TerminalDevice->SimpleInput,\r
+ &gEfiSimpleTextInputExProtocolGuid,\r
+ &TerminalDevice->SimpleInputEx,\r
NULL\r
);\r
- }\r
- //\r
- // Register the Parent-Child relationship via\r
- // EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER.\r
- //\r
- Status = gBS->OpenProtocol (\r
- Controller,\r
- &gEfiSerialIoProtocolGuid,\r
- (VOID **) &TerminalDevice->SerialIo,\r
- This->DriverBindingHandle,\r
- TerminalDevice->Handle,\r
- EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER\r
- );\r
- if (EFI_ERROR (Status)) {\r
- goto Error;\r
+ if (EFI_ERROR (Status)) {\r
+ goto Error;\r
+ }\r
}\r
\r
+ if (!SimTxtOutInstalled && (ConOutSelected || NullRemaining)) {\r
+ Status = gBS->InstallProtocolInterface (\r
+ &TerminalDevice->Handle,\r
+ &gEfiSimpleTextOutProtocolGuid,\r
+ EFI_NATIVE_INTERFACE,\r
+ &TerminalDevice->SimpleTextOutput\r
+ );\r
+ if (EFI_ERROR (Status)) {\r
+ goto Error;\r
+ }\r
+ }\r
if (DefaultNode != NULL) {\r
FreePool (DefaultNode);\r
}\r
//\r
// Report error code before exiting\r
//\r
+ DevicePath = ParentDevicePath;\r
REPORT_STATUS_CODE_WITH_DEVICE_PATH (\r
EFI_ERROR_CODE | EFI_ERROR_MINOR,\r
- PcdGet32 (PcdStatusCodeValueRemoteConsoleError),\r
+ (EFI_PERIPHERAL_REMOTE_CONSOLE | EFI_P_EC_CONTROLLER_ERROR),\r
DevicePath\r
);\r
\r
gBS->CloseEvent (TerminalDevice->TwoSecondTimeOut);\r
}\r
\r
+ if (TerminalDevice->TimerEvent != NULL) {\r
+ gBS->CloseEvent (TerminalDevice->TimerEvent);\r
+ }\r
+\r
if (TerminalDevice->SimpleInput.WaitForKey != NULL) {\r
gBS->CloseEvent (TerminalDevice->SimpleInput.WaitForKey);\r
}\r
\r
TerminalFreeNotifyList (&TerminalDevice->NotifyList);\r
\r
+ if (TerminalDevice->RawFiFo != NULL) {\r
+ FreePool (TerminalDevice->RawFiFo);\r
+ }\r
+ if (TerminalDevice->UnicodeFiFo != NULL) {\r
+ FreePool (TerminalDevice->UnicodeFiFo);\r
+ }\r
+ if (TerminalDevice->EfiKeyFiFo != NULL) {\r
+ FreePool (TerminalDevice->EfiKeyFiFo);\r
+ }\r
+\r
if (TerminalDevice->ControllerNameTable != NULL) {\r
FreeUnicodeStringTable (TerminalDevice->ControllerNameTable);\r
}\r
FreePool (TerminalDevice->DevicePath);\r
}\r
\r
+ if (TerminalDevice->TerminalConsoleModeData != NULL) {\r
+ FreePool (TerminalDevice->TerminalConsoleModeData);\r
+ }\r
+\r
FreePool (TerminalDevice);\r
}\r
}\r
/**\r
Stop this driver on Controller by closing Simple Text In, Simple Text\r
In Ex, Simple Text Out protocol, and removing parent device path from\r
- Console Device Environment Variables. \r
+ Console Device Environment Variables.\r
\r
@param This Protocol instance pointer.\r
@param Controller Handle of device to stop driver on\r
FreeUnicodeStringTable (TerminalDevice->ControllerNameTable);\r
}\r
\r
- Status = gBS->OpenProtocol (\r
- ChildHandleBuffer[Index],\r
- &gEfiHotPlugDeviceGuid,\r
- NULL,\r
- This->DriverBindingHandle,\r
- Controller,\r
- EFI_OPEN_PROTOCOL_TEST_PROTOCOL\r
- );\r
- if (!EFI_ERROR (Status)) {\r
- Status = gBS->UninstallMultipleProtocolInterfaces (\r
- ChildHandleBuffer[Index],\r
- &gEfiHotPlugDeviceGuid,\r
- NULL,\r
- NULL\r
- );\r
- } else {\r
- Status = EFI_SUCCESS;\r
- }\r
-\r
+ gBS->CloseEvent (TerminalDevice->TimerEvent);\r
gBS->CloseEvent (TerminalDevice->TwoSecondTimeOut);\r
gBS->CloseEvent (TerminalDevice->SimpleInput.WaitForKey);\r
gBS->CloseEvent (TerminalDevice->SimpleInputEx.WaitForKeyEx);\r
TerminalFreeNotifyList (&TerminalDevice->NotifyList);\r
FreePool (TerminalDevice->DevicePath);\r
+ if (TerminalDevice->TerminalConsoleModeData != NULL) {\r
+ FreePool (TerminalDevice->TerminalConsoleModeData);\r
+ }\r
FreePool (TerminalDevice);\r
}\r
}\r
return EFI_SUCCESS;\r
}\r
\r
-\r
-/**\r
- Free notify functions list.\r
-\r
- @param ListHead The list head\r
-\r
- @retval EFI_SUCCESS Free the notify list successfully.\r
- @retval EFI_INVALID_PARAMETER ListHead is NULL.\r
-\r
-**/\r
-EFI_STATUS\r
-TerminalFreeNotifyList (\r
- IN OUT LIST_ENTRY *ListHead\r
- )\r
-{\r
- TERMINAL_CONSOLE_IN_EX_NOTIFY *NotifyNode;\r
-\r
- if (ListHead == NULL) {\r
- return EFI_INVALID_PARAMETER;\r
- }\r
- while (!IsListEmpty (ListHead)) {\r
- NotifyNode = CR (\r
- ListHead->ForwardLink,\r
- TERMINAL_CONSOLE_IN_EX_NOTIFY,\r
- NotifyEntry,\r
- TERMINAL_CONSOLE_IN_EX_NOTIFY_SIGNATURE\r
- );\r
- RemoveEntryList (ListHead->ForwardLink);\r
- FreePool (NotifyNode);\r
- }\r
-\r
- return EFI_SUCCESS;\r
-}\r
-\r
-\r
/**\r
Update terminal device path in Console Device Environment Variables.\r
\r
EFI_DEVICE_PATH_PROTOCOL *NewVariable;\r
EFI_DEVICE_PATH_PROTOCOL *TempDevicePath;\r
\r
- Variable = NULL;\r
-\r
//\r
// Get global variable and its size according to the name given.\r
//\r
- Variable = TerminalGetVariableAndSize (\r
- VariableName,\r
- &gEfiGlobalVariableGuid,\r
- &VariableSize\r
- );\r
+ GetEfiGlobalVariable2 (VariableName, &Variable, NULL);\r
+ if (Variable == NULL) {\r
+ return;\r
+ }\r
+\r
//\r
// Append terminal device path onto the variable.\r
//\r
EFI_DEVICE_PATH_PROTOCOL *SavedNewVariable;\r
EFI_DEVICE_PATH_PROTOCOL *TempDevicePath;\r
\r
- Variable = NULL;\r
Instance = NULL;\r
\r
//\r
// Get global variable and its size according to the name given.\r
//\r
- Variable = TerminalGetVariableAndSize (\r
- VariableName,\r
- &gEfiGlobalVariableGuid,\r
- &VariableSize\r
- );\r
+ GetEfiGlobalVariable2 (VariableName, &Variable, NULL);\r
if (Variable == NULL) {\r
return ;\r
}\r
return ;\r
}\r
\r
-\r
-/**\r
- Read the EFI variable (VendorGuid/Name) and return a dynamically allocated\r
- buffer, and the size of the buffer. On failure return NULL.\r
-\r
- @param Name String part of EFI variable name\r
- @param VendorGuid GUID part of EFI variable name\r
- @param VariableSize Returns the size of the EFI variable that was read\r
-\r
- @return Dynamically allocated memory that contains a copy of the EFI variable.\r
- Caller is responsible freeing the buffer. If variable was not read, \r
- NULL returned.\r
-\r
-**/\r
-VOID *\r
-TerminalGetVariableAndSize (\r
- IN CHAR16 *Name,\r
- IN EFI_GUID *VendorGuid,\r
- OUT UINTN *VariableSize\r
- )\r
-{\r
- EFI_STATUS Status;\r
- UINTN BufferSize;\r
- VOID *Buffer;\r
-\r
- Buffer = NULL;\r
-\r
- //\r
- // Pass in a small size buffer to find the actual variable size.\r
- //\r
- BufferSize = 1;\r
- Buffer = AllocatePool (BufferSize);\r
- if (Buffer == NULL) {\r
- *VariableSize = 0;\r
- return NULL;\r
- }\r
-\r
- Status = gRT->GetVariable (Name, VendorGuid, NULL, &BufferSize, Buffer);\r
-\r
- if (Status == EFI_SUCCESS) {\r
- *VariableSize = BufferSize;\r
- return Buffer;\r
-\r
- } else if (Status == EFI_BUFFER_TOO_SMALL) {\r
- //\r
- // Allocate the buffer to return\r
- //\r
- FreePool (Buffer);\r
- Buffer = AllocatePool (BufferSize);\r
- if (Buffer == NULL) {\r
- *VariableSize = 0;\r
- return NULL;\r
- }\r
- //\r
- // Read variable into the allocated buffer.\r
- //\r
- Status = gRT->GetVariable (Name, VendorGuid, NULL, &BufferSize, Buffer);\r
- if (EFI_ERROR (Status)) {\r
- BufferSize = 0;\r
- FreePool (Buffer);\r
- Buffer = NULL;\r
- }\r
- } else {\r
- //\r
- // Variable not found or other errors met.\r
- //\r
- BufferSize = 0;\r
- FreePool (Buffer);\r
- Buffer = NULL;\r
- }\r
-\r
- *VariableSize = BufferSize;\r
- return Buffer;\r
-}\r
-\r
/**\r
Build terminal device path according to terminal type.\r
\r
return EFI_SUCCESS;\r
}\r
\r
-/**\r
- Initialize the Raw Data FIFO.\r
-\r
- @param TerminalDevice The terminal device.\r
-\r
-**/\r
-VOID\r
-InitializeRawFiFo (\r
- IN TERMINAL_DEV *TerminalDevice\r
- )\r
-{\r
- //\r
- // Make the raw FIFO empty.\r
- //\r
- TerminalDevice->RawFiFo.Head = TerminalDevice->RawFiFo.Tail;\r
-}\r
-\r
-/**\r
- Initialize the Unicode FIFO.\r
-\r
- @param TerminalDevice The terminal device.\r
-\r
-**/\r
-VOID\r
-InitializeUnicodeFiFo (\r
- IN TERMINAL_DEV *TerminalDevice\r
- )\r
-{\r
- //\r
- // Make the unicode FIFO empty\r
- //\r
- TerminalDevice->UnicodeFiFo.Head = TerminalDevice->UnicodeFiFo.Tail;\r
-}\r
-\r
-/**\r
- Initialize the EFI Key FIFO.\r
-\r
- @param TerminalDevice The terminal device.\r
-\r
-**/\r
-VOID\r
-InitializeEfiKeyFiFo (\r
- IN TERMINAL_DEV *TerminalDevice\r
- )\r
-{\r
- //\r
- // Make the efi key FIFO empty\r
- //\r
- TerminalDevice->EfiKeyFiFo.Head = TerminalDevice->EfiKeyFiFo.Tail;\r
-}\r
-\r
-\r
/**\r
The user Entry Point for module Terminal. The user code starts with this function.\r
\r
\r
return Status;\r
}\r
+\r
+/**\r
+ Check if the device supports hot-plug through its device path.\r
+\r
+ This function could be updated to check more types of Hot Plug devices.\r
+ Currently, it checks USB and PCCard device.\r
+\r
+ @param DevicePath Pointer to device's device path.\r
+\r
+ @retval TRUE The devcie is a hot-plug device\r
+ @retval FALSE The devcie is not a hot-plug device.\r
+\r
+**/\r
+BOOLEAN\r
+IsHotPlugDevice (\r
+ IN EFI_DEVICE_PATH_PROTOCOL *DevicePath\r
+ )\r
+{\r
+ EFI_DEVICE_PATH_PROTOCOL *CheckDevicePath;\r
+\r
+ CheckDevicePath = DevicePath;\r
+ while (!IsDevicePathEnd (CheckDevicePath)) {\r
+ //\r
+ // Check device whether is hot plug device or not throught Device Path\r
+ //\r
+ if ((DevicePathType (CheckDevicePath) == MESSAGING_DEVICE_PATH) &&\r
+ (DevicePathSubType (CheckDevicePath) == MSG_USB_DP ||\r
+ DevicePathSubType (CheckDevicePath) == MSG_USB_CLASS_DP ||\r
+ DevicePathSubType (CheckDevicePath) == MSG_USB_WWID_DP)) {\r
+ //\r
+ // If Device is USB device\r
+ //\r
+ return TRUE;\r
+ }\r
+ if ((DevicePathType (CheckDevicePath) == HARDWARE_DEVICE_PATH) &&\r
+ (DevicePathSubType (CheckDevicePath) == HW_PCCARD_DP)) {\r
+ //\r
+ // If Device is PCCard\r
+ //\r
+ return TRUE;\r
+ }\r
+\r
+ CheckDevicePath = NextDevicePathNode (CheckDevicePath);\r
+ }\r
+\r
+ return FALSE;\r
+}\r
+\r
projects / mirror_edk2.git / blobdiff