/** @file\r
Definitions and prototypes for DebugPort driver.\r
\r
-Copyright (c) 2006 - 2008, Intel Corporation. <BR>\r
-All rights reserved. This program and the accompanying materials\r
+Copyright (c) 2006 - 2014, Intel Corporation. All rights reserved.<BR>\r
+This program and the accompanying materials\r
are licensed and made available under the terms and conditions of the BSD License\r
which accompanies this distribution. The full text of the license may be found at\r
http://opensource.org/licenses/bsd-license.php\r
//\r
// local type definitions\r
//\r
-#define DEBUGPORT_DEVICE_SIGNATURE EFI_SIGNATURE_32 ('D', 'B', 'G', 'P')\r
+#define DEBUGPORT_DEVICE_SIGNATURE SIGNATURE_32 ('D', 'B', 'G', 'P')\r
\r
//\r
// Device structure used by driver\r
UINT32 Signature;\r
EFI_HANDLE DriverBindingHandle;\r
EFI_HANDLE DebugPortDeviceHandle;\r
- VOID *DebugPortVariable;\r
\r
- EFI_DRIVER_BINDING_PROTOCOL DriverBindingInterface;\r
- EFI_COMPONENT_NAME_PROTOCOL ComponentNameInterface;\r
EFI_DEVICE_PATH_PROTOCOL *DebugPortDevicePath;\r
EFI_DEBUGPORT_PROTOCOL DebugPortInterface;\r
\r
#define DEBUGPORT_UART_DEFAULT_BAUDRATE 115200\r
#define DEBUGPORT_UART_DEFAULT_PARITY 0\r
#define DEBUGPORT_UART_DEFAULT_FIFO_DEPTH 16\r
-#define DEBUGPORT_UART_DEFAULT_TIMEOUT 50000 // 5 ms\r
+#define DEBUGPORT_UART_DEFAULT_TIMEOUT 50000 ///< 5 ms\r
#define DEBUGPORT_UART_DEFAULT_DATA_BITS 8\r
#define DEBUGPORT_UART_DEFAULT_STOP_BITS 1\r
\r
#define DEBUGPORT_DRIVER_VERSION 1\r
\r
-#define EfiIsUartDevicePath(dp) (DevicePathType (dp) == MESSAGING_DEVICE_PATH && DevicePathSubType (dp) == MSG_UART_DP)\r
+#define IS_UART_DEVICEPATH(dp) (DevicePathType (dp) == MESSAGING_DEVICE_PATH && DevicePathSubType (dp) == MSG_UART_DP)\r
\r
-//\r
-// globals\r
-//\r
-extern DEBUGPORT_DEVICE *gDebugPortDevice;\r
+/**\r
+ Debug Port Driver entry point. \r
\r
-//\r
-// Driver binding interface functions...\r
-//\r
+ Reads DebugPort variable to determine what device and settings to use as the\r
+ debug port. Binds exclusively to SerialIo. Reverts to defaults if no variable\r
+ is found.\r
+\r
+ @param[in] ImageHandle The firmware allocated handle for the EFI image. \r
+ @param[in] SystemTable A pointer to the EFI System Table.\r
+ \r
+ @retval EFI_SUCCESS The entry point is executed successfully.\r
+ @retval EFI_OUT_OF_RESOURCES Fails to allocate memory for device.\r
+ @retval other Some error occurs when executing this entry point.\r
+\r
+**/\r
EFI_STATUS\r
-DebugPortEntryPoint (\r
+EFIAPI\r
+InitializeDebugPortDriver (\r
IN EFI_HANDLE ImageHandle,\r
IN EFI_SYSTEM_TABLE *SystemTable\r
- )\r
-;\r
+ );\r
+\r
+/**\r
+ Checks to see if there's not already a DebugPort interface somewhere. \r
+\r
+ If there's a DEBUGPORT variable, the device path must match exactly. If there's\r
+ no DEBUGPORT variable, then device path is not checked and does not matter.\r
+ Checks to see that there's a serial io interface on the controller handle\r
+ that can be bound BY_DRIVER | EXCLUSIVE.\r
+ If all these tests succeed, then we return EFI_SUCCESS, else, EFI_UNSUPPORTED\r
+ or other error returned by OpenProtocol.\r
+\r
+ @param This Protocol instance pointer.\r
+ @param ControllerHandle Handle of device to test.\r
+ @param RemainingDevicePath Optional parameter use to pick a specific child\r
+ device to start.\r
\r
+ @retval EFI_SUCCESS This driver supports this device.\r
+ @retval EFI_UNSUPPORTED Debug Port device is not supported.\r
+ @retval EFI_OUT_OF_RESOURCES Fails to allocate memory for device.\r
+ @retval others Some error occurs.\r
+\r
+**/\r
EFI_STATUS\r
EFIAPI\r
DebugPortSupported (\r
IN EFI_DRIVER_BINDING_PROTOCOL *This,\r
IN EFI_HANDLE Controller,\r
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath\r
- )\r
-;\r
+ );\r
+\r
+/**\r
+ Binds exclusively to serial io on the controller handle, Produces DebugPort\r
+ protocol and DevicePath on new handle.\r
+\r
+ @param This Protocol instance pointer.\r
+ @param ControllerHandle Handle of device to bind driver to.\r
+ @param RemainingDevicePath Optional parameter use to pick a specific child\r
+ device to start.\r
+\r
+ @retval EFI_SUCCESS This driver is added to ControllerHandle.\r
+ @retval EFI_OUT_OF_RESOURCES Fails to allocate memory for device.\r
+ @retval others Some error occurs. \r
\r
+**/\r
EFI_STATUS\r
EFIAPI\r
DebugPortStart (\r
IN EFI_DRIVER_BINDING_PROTOCOL *This,\r
IN EFI_HANDLE Controller,\r
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath\r
- )\r
-;\r
+ );\r
+\r
+/**\r
+ Stop this driver on ControllerHandle by removing Serial IO protocol on\r
+ the ControllerHandle.\r
\r
+ @param This Protocol instance pointer.\r
+ @param ControllerHandle Handle of device to stop driver on\r
+ @param NumberOfChildren Number of Handles in ChildHandleBuffer. If number of\r
+ children is zero stop the entire bus driver.\r
+ @param ChildHandleBuffer List of Child Handles to Stop.\r
+\r
+ @retval EFI_SUCCESS This driver is removed ControllerHandle.\r
+ @retval other This driver was not removed from this device.\r
+\r
+**/\r
EFI_STATUS\r
EFIAPI\r
DebugPortStop (\r
IN EFI_HANDLE Controller,\r
IN UINTN NumberOfChildren,\r
IN EFI_HANDLE *ChildHandleBuffer\r
- )\r
-;\r
+ );\r
\r
//\r
// EFI Component Name Functions\r
languages specified in SupportedLanguages. The\r
number of languages supported by a driver is up\r
to the driver writer. Language is specified\r
- in RFC 3066 or ISO 639-2 language code format.\r
+ in RFC 4646 or ISO 639-2 language code format.\r
\r
@param DriverName[out] A pointer to the Unicode string to return.\r
This Unicode string is the name of the\r
languages specified in SupportedLanguages. The\r
number of languages supported by a driver is up\r
to the driver writer. Language is specified in\r
- RFC 3066 or ISO 639-2 language code format.\r
+ RFC 4646 or ISO 639-2 language code format.\r
\r
@param ControllerName[out] A pointer to the Unicode string to return.\r
This Unicode string is the name of the\r
driver specified by This was returned in\r
DriverName.\r
\r
- @retval EFI_INVALID_PARAMETER ControllerHandle is not a valid EFI_HANDLE.\r
+ @retval EFI_INVALID_PARAMETER ControllerHandle is NULL.\r
\r
@retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a valid\r
EFI_HANDLE.\r
);\r
\r
\r
-//\r
-// DebugPort member functions\r
-//\r
+/**\r
+ DebugPort protocol member function. Calls SerialIo:GetControl to flush buffer.\r
+ We cannot call SerialIo:SetAttributes because it uses pool services, which use\r
+ locks, which affect TPL, so it's not interrupt context safe or re-entrant.\r
+ SerialIo:Reset() calls SetAttributes, so it can't be used either.\r
+\r
+ The port itself should be fine since it was set up during initialization.\r
+\r
+ @param This Protocol instance pointer. \r
+\r
+ @return EFI_SUCCESS Always.\r
+\r
+**/\r
EFI_STATUS\r
EFIAPI\r
DebugPortReset (\r
IN EFI_DEBUGPORT_PROTOCOL *This\r
- )\r
-;\r
+ );\r
+\r
+/**\r
+ DebugPort protocol member function. Calls SerialIo:Read() after setting\r
+ if it's different than the last SerialIo access.\r
+\r
+ @param This Pointer to DebugPort protocol.\r
+ @param Timeout Timeout value.\r
+ @param BufferSize On input, the size of Buffer.\r
+ On output, the amount of data actually written.\r
+ @param Buffer Pointer to buffer to read.\r
+\r
+ @retval EFI_SUCCESS \r
+ @retval others \r
\r
+**/\r
EFI_STATUS\r
EFIAPI\r
DebugPortRead (\r
IN UINT32 Timeout,\r
IN OUT UINTN *BufferSize,\r
IN VOID *Buffer\r
- )\r
-;\r
+ );\r
+\r
+/**\r
+ DebugPort protocol member function. Calls SerialIo:Write() Writes 8 bytes at\r
+ a time and does a GetControl between 8 byte writes to help insure reads are\r
+ interspersed This is poor-man's flow control.\r
\r
+ @param This Pointer to DebugPort protocol.\r
+ @param Timeout Timeout value.\r
+ @param BufferSize On input, the size of Buffer.\r
+ On output, the amount of data actually written.\r
+ @param Buffer Pointer to buffer to read.\r
+\r
+ @retval EFI_SUCCESS The data was written.\r
+ @retval others Fails when writting datas to debug port device.\r
+\r
+**/\r
EFI_STATUS\r
EFIAPI\r
DebugPortWrite (\r
IN UINT32 Timeout,\r
IN OUT UINTN *BufferSize,\r
OUT VOID *Buffer\r
- )\r
-;\r
+ );\r
+\r
+/**\r
+ DebugPort protocol member function. Calls SerialIo:Write() after setting\r
+ if it's different than the last SerialIo access.\r
\r
+ @param This Pointer to DebugPort protocol.\r
+\r
+ @retval EFI_SUCCESS At least 1 character is ready to be read from\r
+ the DebugPort interface.\r
+ @retval EFI_NOT_READY There are no characters ready to read from the\r
+ DebugPort interface\r
+ @retval EFI_DEVICE_ERROR A hardware failure occured... (from SerialIo)\r
+\r
+**/ \r
EFI_STATUS\r
EFIAPI\r
DebugPortPoll (\r
IN EFI_DEBUGPORT_PROTOCOL *This\r
- )\r
-;\r
+ );\r
\r
#endif\r