be of use to a disassembler for the most part. Also provides function\r
prototypes for VM functions.\r
\r
-Copyright (c) 2006 - 2010, Intel Corporation. <BR>\r
-All rights reserved. This program and the accompanying materials\r
-are licensed and made available under the terms and conditions of the BSD License\r
-which accompanies this distribution. The full text of the license may be found at\r
-http://opensource.org/licenses/bsd-license.php\r
-\r
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
+Copyright (c) 2006 - 2011, Intel Corporation. All rights reserved.<BR>\r
+SPDX-License-Identifier: BSD-2-Clause-Patent\r
\r
**/\r
\r
#ifndef _EBC_EXECUTE_H_\r
#define _EBC_EXECUTE_H_\r
\r
-//\r
-// VM major/minor version\r
-//\r
-#define VM_MAJOR_VERSION 1\r
-#define VM_MINOR_VERSION 0\r
-\r
//\r
// Macros to check and set alignment\r
//\r
#define ASSERT_ALIGNED(addr, size) ASSERT (!((UINT32) (addr) & (size - 1)))\r
#define IS_ALIGNED(addr, size) !((UINT32) (addr) & (size - 1))\r
\r
-//\r
-// Define a macro to get the operand. Then we can change it to be either a\r
-// direct read or have it call a function to read memory.\r
-//\r
-#define GETOPERANDS(pVM) (UINT8) (*(UINT8 *) (pVM->Ip + 1))\r
-#define GETOPCODE(pVM) (UINT8) (*(UINT8 *) pVM->Ip)\r
-\r
-//\r
-// Bit masks for opcode encodings\r
-//\r
-#define OPCODE_M_OPCODE 0x3F // bits of interest for first level decode\r
-#define OPCODE_M_IMMDATA 0x80\r
-#define OPCODE_M_IMMDATA64 0x40\r
-#define OPCODE_M_64BIT 0x40 // for CMP\r
-#define OPCODE_M_RELADDR 0x10 // for CALL instruction\r
-#define OPCODE_M_CMPI32_DATA 0x80 // for CMPI\r
-#define OPCODE_M_CMPI64 0x40 // for CMPI 32 or 64 bit comparison\r
-#define OPERAND_M_MOVIN_N 0x80\r
-#define OPERAND_M_CMPI_INDEX 0x10\r
-\r
-//\r
-// Masks for instructions that encode presence of indexes for operand1 and/or\r
-// operand2.\r
-//\r
-#define OPCODE_M_IMMED_OP1 0x80\r
-#define OPCODE_M_IMMED_OP2 0x40\r
-\r
-//\r
-// Bit masks for operand encodings\r
-//\r
-#define OPERAND_M_INDIRECT1 0x08\r
-#define OPERAND_M_INDIRECT2 0x80\r
-#define OPERAND_M_OP1 0x07\r
-#define OPERAND_M_OP2 0x70\r
-\r
-//\r
-// Masks for data manipulation instructions\r
-//\r
-#define DATAMANIP_M_64 0x40 // 64-bit width operation\r
-#define DATAMANIP_M_IMMDATA 0x80\r
-\r
-//\r
-// For MOV instructions, need a mask for the opcode when immediate\r
-// data applies to R2.\r
-//\r
-#define OPCODE_M_IMMED_OP2 0x40\r
-\r
-//\r
-// The MOVI/MOVIn instructions use bit 6 of operands byte to indicate\r
-// if an index is present. Then bits 4 and 5 are used to indicate the width\r
-// of the move.\r
-//\r
-#define MOVI_M_IMMDATA 0x40\r
-#define MOVI_M_DATAWIDTH 0xC0\r
-#define MOVI_DATAWIDTH16 0x40\r
-#define MOVI_DATAWIDTH32 0x80\r
-#define MOVI_DATAWIDTH64 0xC0\r
-#define MOVI_M_MOVEWIDTH 0x30\r
-#define MOVI_MOVEWIDTH8 0x00\r
-#define MOVI_MOVEWIDTH16 0x10\r
-#define MOVI_MOVEWIDTH32 0x20\r
-#define MOVI_MOVEWIDTH64 0x30\r
-\r
-//\r
-// Masks for CALL instruction encodings\r
-//\r
-#define OPERAND_M_RELATIVE_ADDR 0x10\r
-#define OPERAND_M_NATIVE_CALL 0x20\r
-\r
-//\r
-// Masks for decoding push/pop instructions\r
-//\r
-#define PUSHPOP_M_IMMDATA 0x80 // opcode bit indicating immediate data\r
-#define PUSHPOP_M_64 0x40 // opcode bit indicating 64-bit operation\r
-//\r
-// Mask for operand of JMP instruction\r
-//\r
-#define JMP_M_RELATIVE 0x10\r
-#define JMP_M_CONDITIONAL 0x80\r
-#define JMP_M_CS 0x40\r
-\r
-//\r
-// Macros to determine if a given operand is indirect\r
-//\r
-#define OPERAND1_INDIRECT(op) ((op) & OPERAND_M_INDIRECT1)\r
-#define OPERAND2_INDIRECT(op) ((op) & OPERAND_M_INDIRECT2)\r
-\r
-//\r
-// Macros to extract the operands from second byte of instructions\r
-//\r
-#define OPERAND1_REGNUM(op) ((op) & OPERAND_M_OP1)\r
-#define OPERAND2_REGNUM(op) (((op) & OPERAND_M_OP2) >> 4)\r
-\r
-#define OPERAND1_CHAR(op) ('0' + OPERAND1_REGNUM (op))\r
-#define OPERAND2_CHAR(op) ('0' + OPERAND2_REGNUM (op))\r
-\r
-#define OPERAND1_REGDATA(pvm, op) pvm->Gpr[OPERAND1_REGNUM (op)]\r
-#define OPERAND2_REGDATA(pvm, op) pvm->Gpr[OPERAND2_REGNUM (op)]\r
-\r
-//\r
-// Condition masks usually for byte 1 encodings of code\r
-//\r
-#define CONDITION_M_CONDITIONAL 0x80\r
-#define CONDITION_M_CS 0x40\r
-\r
-//\r
-// Bits in the VM->StopFlags field\r
-//\r
-#define STOPFLAG_APP_DONE 0x0001\r
-#define STOPFLAG_BREAKPOINT 0x0002\r
-#define STOPFLAG_INVALID_BREAK 0x0004\r
-#define STOPFLAG_BREAK_ON_CALLEX 0x0008\r
-\r
-//\r
-// Masks for working with the VM flags register\r
-//\r
-#define VMFLAGS_CC 0x0001 // condition flag\r
-#define VMFLAGS_STEP 0x0002 // step instruction mode\r
-#define VMFLAGS_ALL_VALID (VMFLAGS_CC | VMFLAGS_STEP)\r
-\r
-//\r
-// Macros for operating on the VM flags register\r
-//\r
-#define VMFLAG_SET(pVM, Flag) (pVM->Flags |= (Flag))\r
-#define VMFLAG_ISSET(pVM, Flag) ((pVM->Flags & (Flag)) ? 1 : 0)\r
-#define VMFLAG_CLEAR(pVM, Flag) (pVM->Flags &= ~(Flag))\r
-\r
//\r
// Debug macro\r
//\r
-#define EBCMSG(s) gST->ConOut->OutputString (gST->ConOut, s)\r
-\r
-//\r
-// Define OPCODES\r
-//\r
-#define OPCODE_BREAK 0x00\r
-#define OPCODE_JMP 0x01\r
-#define OPCODE_JMP8 0x02\r
-#define OPCODE_CALL 0x03\r
-#define OPCODE_RET 0x04\r
-#define OPCODE_CMPEQ 0x05\r
-#define OPCODE_CMPLTE 0x06\r
-#define OPCODE_CMPGTE 0x07\r
-#define OPCODE_CMPULTE 0x08\r
-#define OPCODE_CMPUGTE 0x09\r
-#define OPCODE_NOT 0x0A\r
-#define OPCODE_NEG 0x0B\r
-#define OPCODE_ADD 0x0C\r
-#define OPCODE_SUB 0x0D\r
-#define OPCODE_MUL 0x0E\r
-#define OPCODE_MULU 0x0F\r
-#define OPCODE_DIV 0x10\r
-#define OPCODE_DIVU 0x11\r
-#define OPCODE_MOD 0x12\r
-#define OPCODE_MODU 0x13\r
-#define OPCODE_AND 0x14\r
-#define OPCODE_OR 0x15\r
-#define OPCODE_XOR 0x16\r
-#define OPCODE_SHL 0x17\r
-#define OPCODE_SHR 0x18\r
-#define OPCODE_ASHR 0x19\r
-#define OPCODE_EXTNDB 0x1A\r
-#define OPCODE_EXTNDW 0x1B\r
-#define OPCODE_EXTNDD 0x1C\r
-#define OPCODE_MOVBW 0x1D\r
-#define OPCODE_MOVWW 0x1E\r
-#define OPCODE_MOVDW 0x1F\r
-#define OPCODE_MOVQW 0x20\r
-#define OPCODE_MOVBD 0x21\r
-#define OPCODE_MOVWD 0x22\r
-#define OPCODE_MOVDD 0x23\r
-#define OPCODE_MOVQD 0x24\r
-#define OPCODE_MOVSNW 0x25 // Move signed natural with word index\r
-#define OPCODE_MOVSND 0x26 // Move signed natural with dword index\r
-//\r
-// #define OPCODE_27 0x27\r
-//\r
-#define OPCODE_MOVQQ 0x28 // Does this go away?\r
-#define OPCODE_LOADSP 0x29\r
-#define OPCODE_STORESP 0x2A\r
-#define OPCODE_PUSH 0x2B\r
-#define OPCODE_POP 0x2C\r
-#define OPCODE_CMPIEQ 0x2D\r
-#define OPCODE_CMPILTE 0x2E\r
-#define OPCODE_CMPIGTE 0x2F\r
-#define OPCODE_CMPIULTE 0x30\r
-#define OPCODE_CMPIUGTE 0x31\r
-#define OPCODE_MOVNW 0x32\r
-#define OPCODE_MOVND 0x33\r
-//\r
-// #define OPCODE_34 0x34\r
-//\r
-#define OPCODE_PUSHN 0x35\r
-#define OPCODE_POPN 0x36\r
-#define OPCODE_MOVI 0x37\r
-#define OPCODE_MOVIN 0x38\r
-#define OPCODE_MOVREL 0x39\r
+#define EBCMSG(s) gST->ConOut->OutputString (gST->ConOut, s)\r
\r
/**\r
Execute an EBC image from an entry point or from a published protocol.\r
**/\r
EFI_STATUS\r
EbcExecute (\r
- IN VM_CONTEXT *VmPtr\r
+ IN VM_CONTEXT *VmPtr\r
);\r
\r
-\r
-\r
/**\r
Returns the version of the EBC virtual machine.\r
\r
**/\r
EFI_STATUS\r
VmWriteMemN (\r
- IN VM_CONTEXT *VmPtr,\r
- IN UINTN Addr,\r
- IN UINTN Data\r
+ IN VM_CONTEXT *VmPtr,\r
+ IN UINTN Addr,\r
+ IN UINTN Data\r
);\r
\r
/**\r
**/\r
EFI_STATUS\r
VmWriteMem64 (\r
- IN VM_CONTEXT *VmPtr,\r
- IN UINTN Addr,\r
- IN UINT64 Data\r
- );\r
-\r
-//\r
-// Define a protocol for an EBC VM test interface.\r
-//\r
-#define EFI_EBC_VM_TEST_PROTOCOL_GUID \\r
- { \\r
- 0xAAEACCFDL, 0xF27B, 0x4C17, { 0xB6, 0x10, 0x75, 0xCA, 0x1F, 0x2D, 0xFB, 0x52 } \\r
- }\r
-\r
-//\r
-// Define for forward reference.\r
-//\r
-typedef struct _EFI_EBC_VM_TEST_PROTOCOL EFI_EBC_VM_TEST_PROTOCOL;\r
-\r
-typedef\r
-EFI_STATUS\r
-(*EBC_VM_TEST_EXECUTE) (\r
- IN EFI_EBC_VM_TEST_PROTOCOL * This,\r
- IN VM_CONTEXT * VmPtr,\r
- IN OUT UINTN *InstructionCount\r
- );\r
-\r
-typedef\r
-EFI_STATUS\r
-(*EBC_VM_TEST_ASM) (\r
- IN EFI_EBC_VM_TEST_PROTOCOL * This,\r
- IN CHAR16 *AsmText,\r
- IN OUT INT8 *Buffer,\r
- IN OUT UINTN *BufferLen\r
- );\r
-\r
-typedef\r
-EFI_STATUS\r
-(*EBC_VM_TEST_DASM) (\r
- IN EFI_EBC_VM_TEST_PROTOCOL * This,\r
- IN OUT CHAR16 *AsmText,\r
- IN OUT INT8 *Buffer,\r
- IN OUT UINTN *Len\r
+ IN VM_CONTEXT *VmPtr,\r
+ IN UINTN Addr,\r
+ IN UINT64 Data\r
);\r
\r
-//\r
-// Prototype for the actual EBC test protocol interface\r
-//\r
-struct _EFI_EBC_VM_TEST_PROTOCOL {\r
- EBC_VM_TEST_EXECUTE Execute;\r
- EBC_VM_TEST_ASM Assemble;\r
- EBC_VM_TEST_DASM Disassemble;\r
-};\r
-\r
/**\r
Given a pointer to a new VM context, execute one or more instructions. This\r
function is only used for test purposes via the EBC VM test protocol.\r
\r
**/\r
EFI_STATUS\r
+EFIAPI\r
EbcExecuteInstructions (\r
- IN EFI_EBC_VM_TEST_PROTOCOL *This,\r
- IN VM_CONTEXT *VmPtr,\r
- IN OUT UINTN *InstructionCount\r
+ IN EFI_EBC_VM_TEST_PROTOCOL *This,\r
+ IN VM_CONTEXT *VmPtr,\r
+ IN OUT UINTN *InstructionCount\r
);\r
\r
#endif // ifndef _EBC_EXECUTE_H_\r
projects / mirror_edk2.git / blobdiff