/** @file\r
+ Implementation of driver entry point and driver binding protocol.\r
\r
-Copyright (c) 2005 - 2008, Intel Corporation\r
+Copyright (c) 2005 - 2008, Intel Corporation.<BR>\r
All rights reserved. This program and the accompanying materials\r
are licensed and made available under the terms and conditions of the BSD License\r
which accompanies this distribution. The full text of the license may be found at\r
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
\r
-Module Name:\r
-\r
- MnpDriver.c\r
-\r
-Abstract:\r
-\r
-\r
**/\r
\r
#include "MnpDriver.h"\r
NULL\r
};\r
\r
-\r
/**\r
- Test to see if this driver supports ControllerHandle.\r
-\r
- @param This Protocol instance pointer.\r
- @param ControllerHandle Handle of device to test.\r
- @param RemainingDevicePath Optional parameter use to pick a specific child\r
- device to start.\r
-\r
- @retval EFI_SUCCES This driver supports this device.\r
- @retval EFI_ALREADY_STARTED This driver is already running on this device.\r
- @retval other This driver does not support this device.\r
+ Test to see if this driver supports ControllerHandle. This service\r
+ is called by the EFI boot service ConnectController(). In\r
+ order to make drivers as small as possible, there are a few calling\r
+ restrictions for this service. ConnectController() must\r
+ follow these calling restrictions. If any other agent wishes to call\r
+ Supported() it must also follow these calling restrictions.\r
+\r
+ @param[in] This Protocol instance pointer.\r
+ @param[in] ControllerHandle Handle of device to test\r
+ @param[in] RemainingDevicePath Optional parameter use to pick a specific child\r
+ device to start.\r
+\r
+ @retval EFI_SUCCESS This driver supports this device\r
+ @retval EFI_ALREADY_STARTED This driver is already running on this device\r
+ @retval other This driver does not support this device\r
\r
**/\r
EFI_STATUS\r
\r
\r
/**\r
- Start this driver on ControllerHandle.\r
-\r
- @param This Protocol instance pointer.\r
- @param ControllerHandle Handle of device to bind driver to.\r
- @param RemainingDevicePath Optional parameter use to pick a specific child\r
- device to start.\r
-\r
- @retval EFI_SUCCES This driver is added to ControllerHandle.\r
- @retval EFI_ALREADY_STARTED This driver is already running on\r
- ControllerHandle.\r
- @retval other This driver does not support this device.\r
+ Start this driver on ControllerHandle. This service is called by the\r
+ EFI boot service ConnectController(). In order to make\r
+ drivers as small as possible, there are a few calling restrictions for\r
+ this service. ConnectController() must follow these\r
+ calling restrictions. If any other agent wishes to call Start() it\r
+ must also follow these calling restrictions.\r
+\r
+ @param[in] This Protocol instance pointer.\r
+ @param[in] ControllerHandle Handle of device to bind driver to.\r
+ @param[in] RemainingDevicePath Optional parameter use to pick a specific child\r
+ device to start.\r
+\r
+ @retval EFI_SUCCESS This driver is added to ControllerHandle\r
+ @retval EFI_ALREADY_STARTED This driver is already running on ControllerHandle\r
+ @retval other This driver does not support this device\r
\r
**/\r
EFI_STATUS\r
//\r
// Flush the Mnp Service Data.\r
//\r
- MnpFlushServiceData (MnpServiceData);\r
+ MnpFlushServiceData (MnpServiceData, This->DriverBindingHandle);\r
}\r
\r
- //\r
- // Close the Simple Network Protocol.\r
- //\r
- gBS->CloseProtocol (\r
- ControllerHandle,\r
- &gEfiSimpleNetworkProtocolGuid,\r
- This->DriverBindingHandle,\r
- ControllerHandle\r
- );\r
-\r
gBS->FreePool (MnpServiceData);\r
}\r
\r
return Status;\r
}\r
\r
-\r
/**\r
- Stop this driver on ControllerHandle.\r
-\r
- @param This Protocol instance pointer.\r
- @param ControllerHandle Handle of device to stop driver on.\r
- @param NumberOfChildren Number of Handles in ChildHandleBuffer. If number\r
- of children is zero stop the entire bus driver.\r
- @param ChildHandleBuffer List of Child Handles to Stop.\r
-\r
- @retval EFI_SUCCES This driver is removed ControllerHandle.\r
- @retval other This driver was not removed from this device.\r
+ Stop this driver on ControllerHandle. This service is called by the\r
+ EFI boot service DisconnectController(). In order to\r
+ make drivers as small as possible, there are a few calling\r
+ restrictions for this service. DisconnectController()\r
+ must follow these calling restrictions. If any other agent wishes\r
+ to call Stop() it must also follow these calling restrictions.\r
+ \r
+ @param[in] This Protocol instance pointer.\r
+ @param[in] ControllerHandle Handle of device to stop driver on\r
+ @param[in] NumberOfChildren Number of Handles in ChildHandleBuffer. If number of\r
+ children is zero stop the entire bus driver.\r
+ @param[in] ChildHandleBuffer List of Child Handles to Stop.\r
+\r
+ @retval EFI_SUCCESS This driver is removed ControllerHandle\r
+ @retval other This driver was not removed from this device\r
\r
**/\r
EFI_STATUS\r
NULL\r
);\r
\r
- //\r
- // Close the openned Snp protocol.\r
- //\r
- gBS->CloseProtocol (\r
- ControllerHandle,\r
- &gEfiSimpleNetworkProtocolGuid,\r
- This->DriverBindingHandle,\r
- ControllerHandle\r
- );\r
-\r
//\r
// Flush the Mnp service data.\r
//\r
- MnpFlushServiceData (MnpServiceData);\r
+ MnpFlushServiceData (MnpServiceData, This->DriverBindingHandle);\r
\r
gBS->FreePool (MnpServiceData);\r
} else {\r
\r
\r
/**\r
- Creates a child handle with a set of I/O services.\r
-\r
- @param This Protocol instance pointer.\r
- @param ChildHandle Pointer to the handle of the child to create. If\r
- it is NULL, then a new handle is created. If it is\r
- not NULL, then the I/O services are added to the\r
- existing child handle.\r
-\r
- @retval EFI_SUCCES The child handle was created with the I/O\r
- services.\r
- @retval EFI_OUT_OF_RESOURCES There are not enough resources availabe to create\r
- the child.\r
- @retval other The child handle was not created.\r
+ Creates a child handle and installs a protocol.\r
+ \r
+ The CreateChild() function installs a protocol on ChildHandle. \r
+ If ChildHandle is a pointer to NULL, then a new handle is created and returned in ChildHandle. \r
+ If ChildHandle is not a pointer to NULL, then the protocol installs on the existing ChildHandle.\r
+\r
+ @param This Pointer to the EFI_SERVICE_BINDING_PROTOCOL instance.\r
+ @param ChildHandle Pointer to the handle of the child to create. If it is NULL,\r
+ then a new handle is created. If it is a pointer to an existing UEFI handle, \r
+ then the protocol is added to the existing UEFI handle.\r
+\r
+ @retval EFI_SUCCES The protocol was added to ChildHandle.\r
+ @retval EFI_INVALID_PARAMETER ChildHandle is NULL.\r
+ @retval EFI_OUT_OF_RESOURCES There are not enough resources availabe to create\r
+ the child\r
+ @retval other The child handle was not created\r
\r
**/\r
EFI_STATUS\r
EFIAPI\r
MnpServiceBindingCreateChild (\r
IN EFI_SERVICE_BINDING_PROTOCOL *This,\r
- IN EFI_HANDLE *ChildHandle\r
+ IN OUT EFI_HANDLE *ChildHandle\r
)\r
{\r
EFI_STATUS Status;\r
\r
\r
/**\r
- Destroys a child handle with a set of I/O services.\r
-\r
- @param This Protocol instance pointer.\r
- @param ChildHandle Handle of the child to destroy.\r
-\r
- @retval EFI_SUCCES The I/O services were removed from the child\r
- handle.\r
- @retval EFI_UNSUPPORTED The child handle does not support the I/O services\r
- that are being removed.\r
- @retval EFI_INVALID_PARAMETER Child handle is not a valid EFI Handle.\r
- @retval EFI_ACCESS_DENIED The child handle could not be destroyed because\r
- its I/O services are being used.\r
- @retval other The child handle was not destroyed.\r
+ Destroys a child handle with a protocol installed on it.\r
+ \r
+ The DestroyChild() function does the opposite of CreateChild(). It removes a protocol \r
+ that was installed by CreateChild() from ChildHandle. If the removed protocol is the \r
+ last protocol on ChildHandle, then ChildHandle is destroyed.\r
+\r
+ @param This Pointer to the EFI_SERVICE_BINDING_PROTOCOL instance.\r
+ @param ChildHandle Handle of the child to destroy\r
+\r
+ @retval EFI_SUCCES The protocol was removed from ChildHandle.\r
+ @retval EFI_UNSUPPORTED ChildHandle does not support the protocol that is being removed.\r
+ @retval EFI_INVALID_PARAMETER Child handle is not a valid UEFI Handle.\r
+ @retval EFI_ACCESS_DENIED The protocol could not be removed from the ChildHandle\r
+ because its services are being used.\r
+ @retval other The child handle was not destroyed\r
\r
**/\r
EFI_STATUS\r
return Status;\r
}\r
\r
+/**\r
+ The entry point for Mnp driver which installs the driver binding and component\r
+ name protocol on its ImageHandle.\r
+\r
+ @param[in] ImageHandle The image handle of the driver.\r
+ @param[in] SystemTable The system table.\r
+\r
+ @retval EFI_SUCCES The driver binding and component name protocols are \r
+ successfully installed.\r
+ @retval other failed.\r
\r
+**/\r
EFI_STATUS\r
EFIAPI\r
MnpDriverEntryPoint (\r
IN EFI_HANDLE ImageHandle,\r
IN EFI_SYSTEM_TABLE *SystemTable\r
)\r
-/*++\r
-\r
-Routine Description:\r
-\r
- The entry point for Mnp driver which installs the driver binding and component name\r
- protocol on its ImageHandle.\r
-\r
-Arguments:\r
-\r
- ImageHandle - The image handle of the driver.\r
- SystemTable - The system table.\r
-\r
-Returns:\r
-\r
- EFI_SUCCESS - If the driver binding and component name protocols are successfully\r
- installed, otherwise if failed.\r
-\r
---*/\r
{\r
return EfiLibInstallDriverBindingComponentName2 (\r
ImageHandle,\r
projects / mirror_edk2.git / blobdiff