/** @file\r
- Memory-only library functions with no library constructor/destructor\r
+ Memory-only library functions with no library constructor/destructor\r
\r
- Copyright (c) 2006, Intel Corporation\r
- All rights reserved. This program and the accompanying materials\r
- are licensed and made available under the terms and conditions of the BSD License\r
- which accompanies this distribution. The full text of the license may be found at\r
- http://opensource.org/licenses/bsd-license.php\r
+ Copyright (c) 2006 - 2008, Intel Corporation\r
+ All rights reserved. This program and the accompanying materials\r
+ are licensed and made available under the terms and conditions of the BSD License\r
+ which accompanies this distribution. The full text of the license may be found at\r
+ http://opensource.org/licenses/bsd-license.php\r
\r
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
-\r
- Module Name: BaseLib.h\r
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
\r
**/\r
\r
#ifndef __BASE_LIB__\r
#define __BASE_LIB__\r
\r
-//\r
-// Definitions for architecture specific types\r
-// These include SPIN_LOCK and BASE_LIBRARY_JUMP_BUFFER\r
-//\r
+///\r
+/// Definitions for SPIN_LOCK\r
+///\r
+typedef volatile UINTN SPIN_LOCK;\r
\r
//\r
-// SPIN_LOCK\r
+// Definitions for architecture specific types\r
//\r
-typedef UINTN SPIN_LOCK;\r
-\r
#if defined (MDE_CPU_IA32)\r
-//\r
-// IA32 context buffer used by SetJump() and LongJump()\r
-//\r
+///\r
+/// IA32 context buffer used by SetJump() and LongJump()\r
+///\r
typedef struct {\r
UINT32 Ebx;\r
UINT32 Esi;\r
UINT32 Eip;\r
} BASE_LIBRARY_JUMP_BUFFER;\r
\r
+#define BASE_LIBRARY_JUMP_BUFFER_ALIGNMENT 4\r
+\r
#elif defined (MDE_CPU_IPF)\r
-//\r
-// IPF context buffer used by SetJump() and LongJump()\r
-//\r
+\r
+///\r
+/// IPF context buffer used by SetJump() and LongJump()\r
+///\r
typedef struct {\r
- UINT64 InitialUNAT;\r
- UINT64 AfterSpillUNAT;\r
- UINT64 PFS;\r
- UINT64 BSP;\r
- UINT64 RNAT;\r
- UINT64 Predicates;\r
- UINT64 LoopCount;\r
+ UINT64 F2[2];\r
+ UINT64 F3[2];\r
+ UINT64 F4[2];\r
+ UINT64 F5[2];\r
+ UINT64 F16[2];\r
+ UINT64 F17[2];\r
+ UINT64 F18[2];\r
+ UINT64 F19[2];\r
+ UINT64 F20[2];\r
+ UINT64 F21[2];\r
+ UINT64 F22[2];\r
+ UINT64 F23[2];\r
+ UINT64 F24[2];\r
+ UINT64 F25[2];\r
+ UINT64 F26[2];\r
+ UINT64 F27[2];\r
+ UINT64 F28[2];\r
+ UINT64 F29[2];\r
+ UINT64 F30[2];\r
+ UINT64 F31[2];\r
UINT64 R4;\r
UINT64 R5;\r
UINT64 R6;\r
UINT64 R7;\r
UINT64 SP;\r
- UINT64 F2Low;\r
- UINT64 F2High;\r
- UINT64 F3Low;\r
- UINT64 F3High;\r
- UINT64 F4Low;\r
- UINT64 F4High;\r
- UINT64 F5Low;\r
- UINT64 F5High;\r
- UINT64 F16Low;\r
- UINT64 F16High;\r
- UINT64 F17Low;\r
- UINT64 F17High;\r
- UINT64 F18Low;\r
- UINT64 F18High;\r
- UINT64 F19Low;\r
- UINT64 F19High;\r
- UINT64 F20Low;\r
- UINT64 F20High;\r
- UINT64 F21Low;\r
- UINT64 F21High;\r
- UINT64 F22Low;\r
- UINT64 F22High;\r
- UINT64 F23Low;\r
- UINT64 F23High;\r
- UINT64 F24Low;\r
- UINT64 F24High;\r
- UINT64 F25Low;\r
- UINT64 F25High;\r
- UINT64 F26Low;\r
- UINT64 F26High;\r
- UINT64 F27Low;\r
- UINT64 F27High;\r
- UINT64 F28Low;\r
- UINT64 F28High;\r
- UINT64 F29Low;\r
- UINT64 F29High;\r
- UINT64 F30Low;\r
- UINT64 F30High;\r
- UINT64 F31Low;\r
- UINT64 F31High;\r
- UINT64 FPSR;\r
UINT64 BR0;\r
UINT64 BR1;\r
UINT64 BR2;\r
UINT64 BR3;\r
UINT64 BR4;\r
UINT64 BR5;\r
+ UINT64 InitialUNAT;\r
+ UINT64 AfterSpillUNAT;\r
+ UINT64 PFS;\r
+ UINT64 BSP;\r
+ UINT64 Predicates;\r
+ UINT64 LoopCount;\r
+ UINT64 FPSR;\r
} BASE_LIBRARY_JUMP_BUFFER;\r
\r
+#define BASE_LIBRARY_JUMP_BUFFER_ALIGNMENT 0x10\r
+\r
#elif defined (MDE_CPU_X64)\r
-//\r
-// X64 context buffer used by SetJump() and LongJump()\r
-//\r
+///\r
+/// X64 context buffer used by SetJump() and LongJump()\r
+///\r
typedef struct {\r
UINT64 Rbx;\r
UINT64 Rsp;\r
UINT64 Rip;\r
} BASE_LIBRARY_JUMP_BUFFER;\r
\r
+#define BASE_LIBRARY_JUMP_BUFFER_ALIGNMENT 8\r
+\r
#elif defined (MDE_CPU_EBC)\r
-//\r
-// EBC context buffer used by SetJump() and LongJump()\r
-//\r
+///\r
+/// EBC context buffer used by SetJump() and LongJump()\r
+///\r
typedef struct {\r
UINT64 R0;\r
UINT64 R1;\r
UINT64 IP;\r
} BASE_LIBRARY_JUMP_BUFFER;\r
\r
+#define BASE_LIBRARY_JUMP_BUFFER_ALIGNMENT 8\r
+\r
#else\r
#error Unknown Processor Type\r
#endif\r
overlap, then the results are undefined.\r
\r
If Destination is NULL, then ASSERT().\r
+ If Destination is not aligned on a 16-bit boundary, then ASSERT().\r
If Source is NULL, then ASSERT().\r
+ If Source is not aligned on a 16-bit boundary, then ASSERT().\r
If Source and Destination overlap, then ASSERT().\r
If PcdMaximumUnicodeStringLength is not zero, and Source contains more than\r
- PcdMaximumUnicodeStringLength Unicode characters, then ASSERT().\r
+ PcdMaximumUnicodeStringLength Unicode characters not including the\r
+ Null-terminator, then ASSERT().\r
\r
@param Destination Pointer to a Null-terminated Unicode string.\r
@param Source Pointer to a Null-terminated Unicode string.\r
IN CONST CHAR16 *Source\r
);\r
\r
+\r
/**\r
Copies one Null-terminated Unicode string with a maximum length to another\r
Null-terminated Unicode string with a maximum length and returns the new\r
characters. If Source and Destination overlap, then the results are\r
undefined.\r
\r
- If Destination is NULL, then ASSERT().\r
- If Source is NULL, then ASSERT().\r
+ If Length > 0 and Destination is NULL, then ASSERT().\r
+ If Length > 0 and Destination is not aligned on a 16-bit boundary, then ASSERT().\r
+ If Length > 0 and Source is NULL, then ASSERT().\r
+ If Length > 0 and Source is not aligned on a 16-bit bounadry, then ASSERT().\r
If Source and Destination overlap, then ASSERT().\r
If PcdMaximumUnicodeStringLength is not zero, and Source contains more than\r
- PcdMaximumUnicodeStringLength Unicode characters, then ASSERT().\r
+ PcdMaximumUnicodeStringLength Unicode characters not including the\r
+ Null-terminator, then ASSERT().\r
\r
@param Destination Pointer to a Null-terminated Unicode string.\r
@param Source Pointer to a Null-terminated Unicode string.\r
IN UINTN Length\r
);\r
\r
+\r
/**\r
Returns the length of a Null-terminated Unicode string.\r
\r
Unicode string specified by String.\r
\r
If String is NULL, then ASSERT().\r
+ If String is not aligned on a 16-bit boundary, then ASSERT().\r
If PcdMaximumUnicodeStringLength is not zero, and String contains more than\r
- PcdMaximumUnicodeStringLength Unicode characters, then ASSERT().\r
+ PcdMaximumUnicodeStringLength Unicode characters not including the\r
+ Null-terminator, then ASSERT().\r
\r
@param String Pointer to a Null-terminated Unicode string.\r
\r
IN CONST CHAR16 *String\r
);\r
\r
+\r
/**\r
Returns the size of a Null-terminated Unicode string in bytes, including the\r
Null terminator.\r
string specified by String.\r
\r
If String is NULL, then ASSERT().\r
+ If String is not aligned on a 16-bit boundary, then ASSERT().\r
If PcdMaximumUnicodeStringLength is not zero, and String contains more than\r
- PcdMaximumUnicodeStringLength Unicode characters, then ASSERT().\r
+ PcdMaximumUnicodeStringLength Unicode characters not including the\r
+ Null-terminator, then ASSERT().\r
\r
@param String Pointer to a Null-terminated Unicode string.\r
\r
IN CONST CHAR16 *String\r
);\r
\r
+\r
/**\r
Compares two Null-terminated Unicode strings, and returns the difference\r
between the first mismatched Unicode characters.\r
mismatched Unicode character in FirstString.\r
\r
If FirstString is NULL, then ASSERT().\r
+ If FirstString is not aligned on a 16-bit boundary, then ASSERT().\r
If SecondString is NULL, then ASSERT().\r
+ If SecondString is not aligned on a 16-bit boundary, then ASSERT().\r
If PcdMaximumUnicodeStringLength is not zero, and FirstString contains more\r
- than PcdMaximumUnicodeStringLength Unicode characters, then ASSERT().\r
+ than PcdMaximumUnicodeStringLength Unicode characters not including the\r
+ Null-terminator, then ASSERT().\r
If PcdMaximumUnicodeStringLength is not zero, and SecondString contains more\r
- than PcdMaximumUnicodeStringLength Unicode characters, then ASSERT().\r
+ than PcdMaximumUnicodeStringLength Unicode characters not including the\r
+ Null-terminator, then ASSERT().\r
\r
@param FirstString Pointer to a Null-terminated Unicode string.\r
@param SecondString Pointer to a Null-terminated Unicode string.\r
\r
- @retval 0 FirstString is identical to SecondString.\r
- @retval !=0 FirstString is not identical to SecondString.\r
+ @retval 0 FirstString is identical to SecondString.\r
+ @return others FirstString is not identical to SecondString.\r
\r
**/\r
INTN\r
IN CONST CHAR16 *SecondString\r
);\r
\r
+\r
/**\r
Compares two Null-terminated Unicode strings with maximum lengths, and\r
returns the difference between the first mismatched Unicode characters.\r
value returned is the first mismatched Unicode character in SecondString\r
subtracted from the first mismatched Unicode character in FirstString.\r
\r
- If FirstString is NULL, then ASSERT().\r
- If SecondString is NULL, then ASSERT().\r
+ If Length > 0 and FirstString is NULL, then ASSERT().\r
+ If Length > 0 and FirstString is not aligned on a 16-bit bounadary, then ASSERT().\r
+ If Length > 0 and SecondString is NULL, then ASSERT().\r
+ If Length > 0 and SecondString is not aligned on a 16-bit bounadary, then ASSERT().\r
If PcdMaximumUnicodeStringLength is not zero, and FirstString contains more\r
- than PcdMaximumUnicodeStringLength Unicode characters, then ASSERT().\r
+ than PcdMaximumUnicodeStringLength Unicode characters not including the\r
+ Null-terminator, then ASSERT().\r
If PcdMaximumUnicodeStringLength is not zero, and SecondString contains more\r
- than PcdMaximumUnicodeStringLength Unicode characters, then ASSERT().\r
+ than PcdMaximumUnicodeStringLength Unicode characters not including the\r
+ Null-terminator, then ASSERT().\r
\r
@param FirstString Pointer to a Null-terminated Unicode string.\r
@param SecondString Pointer to a Null-terminated Unicode string.\r
@param Length Maximum number of Unicode characters to compare.\r
\r
- @retval 0 FirstString is identical to SecondString.\r
- @retval !=0 FirstString is not identical to SecondString.\r
+ @retval 0 FirstString is identical to SecondString.\r
+ @return others FirstString is not identical to SecondString.\r
\r
**/\r
INTN\r
IN UINTN Length\r
);\r
\r
+\r
/**\r
Concatenates one Null-terminated Unicode string to another Null-terminated\r
Unicode string, and returns the concatenated Unicode string.\r
results are undefined.\r
\r
If Destination is NULL, then ASSERT().\r
+ If Destination is not aligned on a 16-bit bounadary, then ASSERT().\r
If Source is NULL, then ASSERT().\r
+ If Source is not aligned on a 16-bit bounadary, then ASSERT().\r
If Source and Destination overlap, then ASSERT().\r
If PcdMaximumUnicodeStringLength is not zero, and Destination contains more\r
- than PcdMaximumUnicodeStringLength Unicode characters, then ASSERT().\r
+ than PcdMaximumUnicodeStringLength Unicode characters not including the\r
+ Null-terminator, then ASSERT().\r
If PcdMaximumUnicodeStringLength is not zero, and Source contains more than\r
- PcdMaximumUnicodeStringLength Unicode characters, then ASSERT().\r
+ PcdMaximumUnicodeStringLength Unicode characters not including the\r
+ Null-terminator, then ASSERT().\r
If PcdMaximumUnicodeStringLength is not zero, and concatenating Destination\r
and Source results in a Unicode string with more than\r
- PcdMaximumUnicodeStringLength Unicode characters, then ASSERT().\r
+ PcdMaximumUnicodeStringLength Unicode characters not including the\r
+ Null-terminator, then ASSERT().\r
\r
@param Destination Pointer to a Null-terminated Unicode string.\r
@param Source Pointer to a Null-terminated Unicode string.\r
IN CONST CHAR16 *Source\r
);\r
\r
+\r
/**\r
Concatenates one Null-terminated Unicode string with a maximum length to the\r
end of another Null-terminated Unicode string, and returns the concatenated\r
the results are undefined.\r
\r
If Destination is NULL, then ASSERT().\r
- If Source is NULL, then ASSERT().\r
+ If Length > 0 and Destination is not aligned on a 16-bit boundary, then ASSERT().\r
+ If Length > 0 and Source is NULL, then ASSERT().\r
+ If Length > 0 and Source is not aligned on a 16-bit boundary, then ASSERT().\r
If Source and Destination overlap, then ASSERT().\r
If PcdMaximumUnicodeStringLength is not zero, and Destination contains more\r
- than PcdMaximumUnicodeStringLength Unicode characters, then ASSERT().\r
+ than PcdMaximumUnicodeStringLength Unicode characters not including the\r
+ Null-terminator, then ASSERT().\r
If PcdMaximumUnicodeStringLength is not zero, and Source contains more than\r
- PcdMaximumUnicodeStringLength Unicode characters, then ASSERT().\r
+ PcdMaximumUnicodeStringLength Unicode characters not including the\r
+ Null-terminator, then ASSERT().\r
If PcdMaximumUnicodeStringLength is not zero, and concatenating Destination\r
and Source results in a Unicode string with more than\r
- PcdMaximumUnicodeStringLength Unicode characters, then ASSERT().\r
+ PcdMaximumUnicodeStringLength Unicode characters not including the\r
+ Null-terminator, then ASSERT().\r
\r
@param Destination Pointer to a Null-terminated Unicode string.\r
@param Source Pointer to a Null-terminated Unicode string.\r
IN UINTN Length\r
);\r
\r
+/**\r
+ Returns the first occurance of a Null-terminated Unicode sub-string\r
+ in a Null-terminated Unicode string.\r
+\r
+ This function scans the contents of the Null-terminated Unicode string\r
+ specified by String and returns the first occurrence of SearchString.\r
+ If SearchString is not found in String, then NULL is returned. If\r
+ the length of SearchString is zero, then String is\r
+ returned.\r
+\r
+ If String is NULL, then ASSERT().\r
+ If String is not aligned on a 16-bit boundary, then ASSERT().\r
+ If SearchString is NULL, then ASSERT().\r
+ If SearchString is not aligned on a 16-bit boundary, then ASSERT().\r
+\r
+ If PcdMaximumUnicodeStringLength is not zero, and SearchString\r
+ or String contains more than PcdMaximumUnicodeStringLength Unicode\r
+ characters not including the Null-terminator, then ASSERT().\r
+\r
+ @param String Pointer to a Null-terminated Unicode string.\r
+ @param SearchString Pointer to a Null-terminated Unicode string to search for.\r
+\r
+ @retval NULL If the SearchString does not appear in String.\r
+ @return others If there is a match.\r
+\r
+**/\r
+CHAR16 *\r
+EFIAPI\r
+StrStr (\r
+ IN CONST CHAR16 *String,\r
+ IN CONST CHAR16 *SearchString\r
+ );\r
+\r
+/**\r
+ Convert a Null-terminated Unicode decimal string to a value of\r
+ type UINTN.\r
+\r
+ This function returns a value of type UINTN by interpreting the contents\r
+ of the Unicode string specified by String as a decimal number. The format\r
+ of the input Unicode string String is:\r
+\r
+ [spaces] [decimal digits].\r
+\r
+ The valid decimal digit character is in the range [0-9]. The\r
+ function will ignore the pad space, which includes spaces or\r
+ tab characters, before [decimal digits]. The running zero in the\r
+ beginning of [decimal digits] will be ignored. Then, the function\r
+ stops at the first character that is a not a valid decimal character\r
+ or a Null-terminator, whichever one comes first.\r
+\r
+ If String is NULL, then ASSERT().\r
+ If String is not aligned in a 16-bit boundary, then ASSERT().\r
+ If String has only pad spaces, then 0 is returned.\r
+ If String has no pad spaces or valid decimal digits,\r
+ then 0 is returned.\r
+ If the number represented by String overflows according\r
+ to the range defined by UINTN, then ASSERT().\r
+\r
+ If PcdMaximumUnicodeStringLength is not zero, and String contains\r
+ more than PcdMaximumUnicodeStringLength Unicode characters not including\r
+ the Null-terminator, then ASSERT().\r
+\r
+ @param String Pointer to a Null-terminated Unicode string.\r
+\r
+ @retval Value translated from String.\r
+\r
+**/\r
+UINTN\r
+EFIAPI\r
+StrDecimalToUintn (\r
+ IN CONST CHAR16 *String\r
+ );\r
+\r
+/**\r
+ Convert a Null-terminated Unicode decimal string to a value of\r
+ type UINT64.\r
+\r
+ This function returns a value of type UINT64 by interpreting the contents\r
+ of the Unicode string specified by String as a decimal number. The format\r
+ of the input Unicode string String is:\r
+\r
+ [spaces] [decimal digits].\r
+\r
+ The valid decimal digit character is in the range [0-9]. The\r
+ function will ignore the pad space, which includes spaces or\r
+ tab characters, before [decimal digits]. The running zero in the\r
+ beginning of [decimal digits] will be ignored. Then, the function\r
+ stops at the first character that is a not a valid decimal character\r
+ or a Null-terminator, whichever one comes first.\r
+\r
+ If String is NULL, then ASSERT().\r
+ If String is not aligned in a 16-bit boundary, then ASSERT().\r
+ If String has only pad spaces, then 0 is returned.\r
+ If String has no pad spaces or valid decimal digits,\r
+ then 0 is returned.\r
+ If the number represented by String overflows according\r
+ to the range defined by UINT64, then ASSERT().\r
+\r
+ If PcdMaximumUnicodeStringLength is not zero, and String contains\r
+ more than PcdMaximumUnicodeStringLength Unicode characters not including\r
+ the Null-terminator, then ASSERT().\r
+\r
+ @param String Pointer to a Null-terminated Unicode string.\r
+\r
+ @retval Value translated from String.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+StrDecimalToUint64 (\r
+ IN CONST CHAR16 *String\r
+ );\r
+ \r
+\r
+/**\r
+ Convert a Null-terminated Unicode hexadecimal string to a value of type UINTN.\r
+\r
+ This function returns a value of type UINTN by interpreting the contents\r
+ of the Unicode string specified by String as a hexadecimal number.\r
+ The format of the input Unicode string String is:\r
+\r
+ [spaces][zeros][x][hexadecimal digits].\r
+\r
+ The valid hexadecimal digit character is in the range [0-9], [a-f] and [A-F].\r
+ The prefix "0x" is optional. Both "x" and "X" is allowed in "0x" prefix.\r
+ If "x" appears in the input string, it must be prefixed with at least one 0.\r
+ The function will ignore the pad space, which includes spaces or tab characters,\r
+ before [zeros], [x] or [hexadecimal digit]. The running zero before [x] or\r
+ [hexadecimal digit] will be ignored. Then, the decoding starts after [x] or the\r
+ first valid hexadecimal digit. Then, the function stops at the first character that is\r
+ a not a valid hexadecimal character or NULL, whichever one comes first.\r
+\r
+ If String is NULL, then ASSERT().\r
+ If String is not aligned in a 16-bit boundary, then ASSERT().\r
+ If String has only pad spaces, then zero is returned.\r
+ If String has no leading pad spaces, leading zeros or valid hexadecimal digits,\r
+ then zero is returned.\r
+ If the number represented by String overflows according to the range defined by\r
+ UINTN, then ASSERT().\r
+\r
+ If PcdMaximumUnicodeStringLength is not zero, and String contains more than\r
+ PcdMaximumUnicodeStringLength Unicode characters not including the Null-terminator,\r
+ then ASSERT().\r
+\r
+ @param String Pointer to a Null-terminated Unicode string.\r
+\r
+ @retval Value translated from String.\r
+\r
+**/\r
+UINTN\r
+EFIAPI\r
+StrHexToUintn (\r
+ IN CONST CHAR16 *String\r
+ );\r
+\r
+\r
+/**\r
+ Convert a Null-terminated Unicode hexadecimal string to a value of type UINT64.\r
+\r
+ This function returns a value of type UINT64 by interpreting the contents\r
+ of the Unicode string specified by String as a hexadecimal number.\r
+ The format of the input Unicode string String is\r
+\r
+ [spaces][zeros][x][hexadecimal digits].\r
+\r
+ The valid hexadecimal digit character is in the range [0-9], [a-f] and [A-F].\r
+ The prefix "0x" is optional. Both "x" and "X" is allowed in "0x" prefix.\r
+ If "x" appears in the input string, it must be prefixed with at least one 0.\r
+ The function will ignore the pad space, which includes spaces or tab characters,\r
+ before [zeros], [x] or [hexadecimal digit]. The running zero before [x] or\r
+ [hexadecimal digit] will be ignored. Then, the decoding starts after [x] or the\r
+ first valid hexadecimal digit. Then, the function stops at the first character that is\r
+ a not a valid hexadecimal character or NULL, whichever one comes first.\r
+\r
+ If String is NULL, then ASSERT().\r
+ If String is not aligned in a 16-bit boundary, then ASSERT().\r
+ If String has only pad spaces, then zero is returned.\r
+ If String has no leading pad spaces, leading zeros or valid hexadecimal digits,\r
+ then zero is returned.\r
+ If the number represented by String overflows according to the range defined by\r
+ UINT64, then ASSERT().\r
+\r
+ If PcdMaximumUnicodeStringLength is not zero, and String contains more than\r
+ PcdMaximumUnicodeStringLength Unicode characters not including the Null-terminator,\r
+ then ASSERT().\r
+\r
+ @param String Pointer to a Null-terminated Unicode string.\r
+\r
+ @retval Value translated from String.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+StrHexToUint64 (\r
+ IN CONST CHAR16 *String\r
+ );\r
+\r
+/**\r
+ Convert a nibble in the low 4 bits of a byte to a Unicode hexadecimal character.\r
+\r
+ This function converts a nibble in the low 4 bits of a byte to a Unicode hexadecimal \r
+ character For example, the nibble 0x01 and 0x0A will converted to L'1' and L'A' \r
+ respectively.\r
+\r
+ The upper nibble in the input byte will be masked off.\r
+\r
+ @param Nibble The nibble which is in the low 4 bits of the input byte.\r
+\r
+ @retval CHAR16 The Unicode hexadecimal character.\r
+ \r
+**/\r
+CHAR16\r
+EFIAPI\r
+NibbleToHexChar (\r
+ IN UINT8 Nibble\r
+ );\r
+\r
+/** \r
+ Convert binary buffer to a Unicode String in a specified sequence. \r
+\r
+ This function converts bytes in the memory block pointed by Buffer to a Unicode String Str. \r
+ Each byte will be represented by two Unicode characters. For example, byte 0xA1 will \r
+ be converted into two Unicode character L'A' and L'1'. In the output String, the Unicode Character \r
+ for the Most Significant Nibble will be put before the Unicode Character for the Least Significant\r
+ Nibble. The output string for the buffer containing a single byte 0xA1 will be L"A1". \r
+ For a buffer with multiple bytes, the Unicode character produced by the first byte will be put into the \r
+ the last character in the output string. The one next to first byte will be put into the\r
+ character before the last character. This rules applies to the rest of the bytes. The Unicode\r
+ character by the last byte will be put into the first character in the output string. For example,\r
+ the input buffer for a 64-bits unsigned integrer 0x12345678abcdef1234 will be converted to\r
+ a Unicode string equal to L"12345678abcdef1234".\r
+\r
+ @param String On input, String is pointed to the buffer allocated for the convertion.\r
+ @param StringLen The Length of String buffer to hold the output String. The length must include the tailing '\0' character.\r
+ The StringLen required to convert a N bytes Buffer will be a least equal to or greater \r
+ than 2*N + 1.\r
+ @param Buffer The pointer to a input buffer.\r
+ @param BufferSizeInBytes Lenth in bytes of the input buffer.\r
+ \r
+\r
+ @retval EFI_SUCCESS The convertion is successfull. All bytes in Buffer has been convert to the corresponding\r
+ Unicode character and placed into the right place in String.\r
+ @retval EFI_BUFFER_TOO_SMALL StringSizeInBytes is smaller than 2 * N + 1the number of bytes required to\r
+ complete the convertion. \r
+**/\r
+RETURN_STATUS\r
+EFIAPI\r
+BufToHexString (\r
+ IN OUT CHAR16 *String,\r
+ IN OUT UINTN *StringLen,\r
+ IN CONST UINT8 *Buffer,\r
+ IN UINTN BufferSizeInBytes\r
+ );\r
+\r
+\r
+/**\r
+ Convert a Unicode string consisting of hexadecimal characters to a output byte buffer.\r
+\r
+ This function converts a Unicode string consisting of characters in the range of Hexadecimal\r
+ character (L'0' to L'9', L'A' to L'F' and L'a' to L'f') to a output byte buffer. The function will stop\r
+ at the first non-hexadecimal character or the NULL character. The convertion process can be\r
+ simply viewed as the reverse operations defined by BufToHexString. Two Unicode characters will be \r
+ converted into one byte. The first Unicode character represents the Most Significant Nibble and the\r
+ second Unicode character represents the Least Significant Nibble in the output byte. \r
+ The first pair of Unicode characters represents the last byte in the output buffer. The second pair of Unicode \r
+ characters represent the the byte preceding the last byte. This rule applies to the rest pairs of bytes. \r
+ The last pair represent the first byte in the output buffer. \r
+\r
+ For example, a Unciode String L"12345678" will be converted into a buffer wil the following bytes \r
+ (first byte is the byte in the lowest memory address): "0x78, 0x56, 0x34, 0x12".\r
+\r
+ If String has N valid hexadecimal characters for conversion, the caller must make sure Buffer is at least \r
+ N/2 (if N is even) or (N+1)/2 (if N if odd) bytes. \r
+\r
+ @param Buffer The output buffer allocated by the caller.\r
+ @param BufferSizeInBytes On input, the size in bytes of Buffer. On output, it is updated to \r
+ contain the size of the Buffer which is actually used for the converstion.\r
+ For Unicode string with 2*N hexadecimal characters (not including the \r
+ tailing NULL character), N bytes of Buffer will be used for the output.\r
+ @param String The input hexadecimal string.\r
+ @param ConvertedStrLen The number of hexadecimal characters used to produce content in output\r
+ buffer Buffer.\r
+\r
+ @retval RETURN_BUFFER_TOO_SMALL The input BufferSizeInBytes is too small to hold the output. BufferSizeInBytes\r
+ will be updated to the size required for the converstion.\r
+ @retval RETURN_SUCCESS The convertion is successful or the first Unicode character from String\r
+ is hexadecimal. If ConvertedStrLen is not NULL, it is updated\r
+ to the number of hexadecimal character used for the converstion.\r
+**/\r
+RETURN_STATUS\r
+EFIAPI\r
+HexStringToBuf (\r
+ OUT UINT8 *Buffer, \r
+ IN OUT UINTN *BufferSizeInBytes,\r
+ IN CONST CHAR16 *String,\r
+ OUT UINTN *ConvertedStrLen OPTIONAL\r
+ );\r
+\r
+\r
+/**\r
+ Test if a Unicode character is a hexadecimal digit. If true, the input\r
+ Unicode character is converted to a byte. \r
+\r
+ This function tests if a Unicode character is a hexadecimal digit. If true, the input\r
+ Unicode character is converted to a byte. For example, Unicode character\r
+ L'A' will be converted to 0x0A. \r
+\r
+ If Digit is NULL, then ASSERT.\r
+\r
+ @param Digit The output hexadecimal digit.\r
+\r
+ @param Char The input Unicode character.\r
+\r
+ @retval TRUE Char is in the range of Hexadecimal number. Digit is updated\r
+ to the byte value of the number.\r
+ @retval FALSE Char is not in the range of Hexadecimal number. Digit is keep\r
+ intact.\r
+ \r
+**/\r
+BOOLEAN\r
+EFIAPI\r
+IsHexDigit (\r
+ OUT UINT8 *Digit,\r
+ IN CHAR16 Char\r
+ );\r
+\r
+/**\r
+ Convert one Null-terminated Unicode string to a Null-terminated\r
+ ASCII string and returns the ASCII string.\r
+\r
+ This function converts the content of the Unicode string Source\r
+ to the ASCII string Destination by copying the lower 8 bits of\r
+ each Unicode character. It returns Destination.\r
+\r
+ If any Unicode characters in Source contain non-zero value in\r
+ the upper 8 bits, then ASSERT().\r
+\r
+ If Destination is NULL, then ASSERT().\r
+ If Source is NULL, then ASSERT().\r
+ If Source is not aligned on a 16-bit boundary, then ASSERT().\r
+ If Source and Destination overlap, then ASSERT().\r
+\r
+ If PcdMaximumUnicodeStringLength is not zero, and Source contains\r
+ more than PcdMaximumUnicodeStringLength Unicode characters not including\r
+ the Null-terminator, then ASSERT().\r
+\r
+ If PcdMaximumAsciiStringLength is not zero, and Source contains more\r
+ than PcdMaximumAsciiStringLength Unicode characters not including the\r
+ Null-terminator, then ASSERT().\r
+\r
+ @param Source Pointer to a Null-terminated Unicode string.\r
+ @param Destination Pointer to a Null-terminated ASCII string.\r
+\r
+ @return Destination\r
+\r
+**/\r
+CHAR8 *\r
+EFIAPI\r
+UnicodeStrToAsciiStr (\r
+ IN CONST CHAR16 *Source,\r
+ OUT CHAR8 *Destination\r
+ );\r
+\r
+\r
/**\r
Copies one Null-terminated ASCII string to another Null-terminated ASCII\r
string and returns the new ASCII string.\r
If Source is NULL, then ASSERT().\r
If Source and Destination overlap, then ASSERT().\r
If PcdMaximumAsciiStringLength is not zero and Source contains more than\r
- PcdMaximumAsciiStringLength ASCII characters, then ASSERT().\r
+ PcdMaximumAsciiStringLength ASCII characters not including the Null-terminator,\r
+ then ASSERT().\r
\r
@param Destination Pointer to a Null-terminated ASCII string.\r
@param Source Pointer to a Null-terminated ASCII string.\r
IN CONST CHAR8 *Source\r
);\r
\r
+\r
/**\r
Copies one Null-terminated ASCII string with a maximum length to another\r
Null-terminated ASCII string with a maximum length and returns the new ASCII\r
If Source is NULL, then ASSERT().\r
If Source and Destination overlap, then ASSERT().\r
If PcdMaximumAsciiStringLength is not zero, and Source contains more than\r
- PcdMaximumAsciiStringLength ASCII characters, then ASSERT().\r
+ PcdMaximumAsciiStringLength ASCII characters not including the Null-terminator,\r
+ then ASSERT().\r
\r
@param Destination Pointer to a Null-terminated ASCII string.\r
@param Source Pointer to a Null-terminated ASCII string.\r
IN UINTN Length\r
);\r
\r
+\r
/**\r
Returns the length of a Null-terminated ASCII string.\r
\r
This function returns the number of ASCII characters in the Null-terminated\r
ASCII string specified by String.\r
\r
- If String is NULL, then ASSERT().\r
+ If Length > 0 and Destination is NULL, then ASSERT().\r
+ If Length > 0 and Source is NULL, then ASSERT().\r
If PcdMaximumAsciiStringLength is not zero and String contains more than\r
- PcdMaximumAsciiStringLength ASCII characters, then ASSERT().\r
+ PcdMaximumAsciiStringLength ASCII characters not including the Null-terminator,\r
+ then ASSERT().\r
\r
@param String Pointer to a Null-terminated ASCII string.\r
\r
IN CONST CHAR8 *String\r
);\r
\r
+\r
/**\r
Returns the size of a Null-terminated ASCII string in bytes, including the\r
Null terminator.\r
\r
If String is NULL, then ASSERT().\r
If PcdMaximumAsciiStringLength is not zero and String contains more than\r
- PcdMaximumAsciiStringLength ASCII characters, then ASSERT().\r
+ PcdMaximumAsciiStringLength ASCII characters not including the Null-terminator,\r
+ then ASSERT().\r
\r
@param String Pointer to a Null-terminated ASCII string.\r
\r
IN CONST CHAR8 *String\r
);\r
\r
+\r
/**\r
Compares two Null-terminated ASCII strings, and returns the difference\r
between the first mismatched ASCII characters.\r
If FirstString is NULL, then ASSERT().\r
If SecondString is NULL, then ASSERT().\r
If PcdMaximumAsciiStringLength is not zero and FirstString contains more than\r
- PcdMaximumAsciiStringLength ASCII characters, then ASSERT().\r
+ PcdMaximumAsciiStringLength ASCII characters not including the Null-terminator,\r
+ then ASSERT().\r
If PcdMaximumAsciiStringLength is not zero and SecondString contains more\r
- than PcdMaximumAsciiStringLength ASCII characters, then ASSERT().\r
+ than PcdMaximumAsciiStringLength ASCII characters not including the\r
+ Null-terminator, then ASSERT().\r
\r
@param FirstString Pointer to a Null-terminated ASCII string.\r
@param SecondString Pointer to a Null-terminated ASCII string.\r
\r
- @retval 0 FirstString is identical to SecondString.\r
- @retval !=0 FirstString is not identical to SecondString.\r
+ @retval 0 FirstString is identical to SecondString.\r
+ @return others FirstString is not identical to SecondString.\r
\r
**/\r
INTN\r
IN CONST CHAR8 *SecondString\r
);\r
\r
+\r
/**\r
Performs a case insensitive comparison of two Null-terminated ASCII strings,\r
and returns the difference between the first mismatched ASCII characters.\r
If FirstString is NULL, then ASSERT().\r
If SecondString is NULL, then ASSERT().\r
If PcdMaximumAsciiStringLength is not zero and FirstString contains more than\r
- PcdMaximumAsciiStringLength ASCII characters, then ASSERT().\r
+ PcdMaximumAsciiStringLength ASCII characters not including the Null-terminator,\r
+ then ASSERT().\r
If PcdMaximumAsciiStringLength is not zero and SecondString contains more\r
- than PcdMaximumAsciiStringLength ASCII characters, then ASSERT().\r
+ than PcdMaximumAsciiStringLength ASCII characters not including the\r
+ Null-terminator, then ASSERT().\r
\r
@param FirstString Pointer to a Null-terminated ASCII string.\r
@param SecondString Pointer to a Null-terminated ASCII string.\r
\r
- @retval 0 FirstString is identical to SecondString using case insensitive\r
- comparisons.\r
- @retval !=0 FirstString is not identical to SecondString using case\r
- insensitive comparisons.\r
+ @retval 0 FirstString is identical to SecondString using case insensitive\r
+ comparisons.\r
+ @return others FirstString is not identical to SecondString using case\r
+ insensitive comparisons.\r
\r
**/\r
INTN\r
IN CONST CHAR8 *SecondString\r
);\r
\r
+\r
/**\r
Compares two Null-terminated ASCII strings with maximum lengths, and returns\r
the difference between the first mismatched ASCII characters.\r
is the first mismatched ASCII character in SecondString subtracted from the\r
first mismatched ASCII character in FirstString.\r
\r
- If FirstString is NULL, then ASSERT().\r
- If SecondString is NULL, then ASSERT().\r
+ If Length > 0 and FirstString is NULL, then ASSERT().\r
+ If Length > 0 and SecondString is NULL, then ASSERT().\r
If PcdMaximumAsciiStringLength is not zero and FirstString contains more than\r
- PcdMaximumAsciiStringLength ASCII characters, then ASSERT().\r
- If PcdMaximumAsciiStringLength is not zero and SecondString contains more\r
- than PcdMaximumAsciiStringLength ASCII characters, then ASSERT().\r
+ PcdMaximumAsciiStringLength ASCII characters not including the Null-terminator,\r
+ then ASSERT().\r
+ If PcdMaximumAsciiStringLength is not zero and SecondString contains more than\r
+ PcdMaximumAsciiStringLength ASCII characters not including the Null-terminator,\r
+ then ASSERT().\r
\r
@param FirstString Pointer to a Null-terminated ASCII string.\r
@param SecondString Pointer to a Null-terminated ASCII string.\r
-\r
- @retval 0 FirstString is identical to SecondString.\r
- @retval !=0 FirstString is not identical to SecondString.\r
+ @param Length Maximum number of ASCII characters for compare.\r
+ \r
+ @retval 0 FirstString is identical to SecondString.\r
+ @return others FirstString is not identical to SecondString.\r
\r
**/\r
INTN\r
IN UINTN Length\r
);\r
\r
+\r
/**\r
Concatenates one Null-terminated ASCII string to another Null-terminated\r
ASCII string, and returns the concatenated ASCII string.\r
If Destination is NULL, then ASSERT().\r
If Source is NULL, then ASSERT().\r
If PcdMaximumAsciiStringLength is not zero and Destination contains more than\r
- PcdMaximumAsciiStringLength ASCII characters, then ASSERT().\r
+ PcdMaximumAsciiStringLength ASCII characters not including the Null-terminator,\r
+ then ASSERT().\r
If PcdMaximumAsciiStringLength is not zero and Source contains more than\r
- PcdMaximumAsciiStringLength ASCII characters, then ASSERT().\r
+ PcdMaximumAsciiStringLength ASCII characters not including the Null-terminator,\r
+ then ASSERT().\r
If PcdMaximumAsciiStringLength is not zero and concatenating Destination and\r
Source results in a ASCII string with more than PcdMaximumAsciiStringLength\r
ASCII characters, then ASSERT().\r
CHAR8 *\r
EFIAPI\r
AsciiStrCat (\r
- IN OUT CHAR8 *Destination,\r
- IN CONST CHAR8 *Source\r
+ IN OUT CHAR8 *Destination,\r
+ IN CONST CHAR8 *Source\r
);\r
\r
+\r
/**\r
Concatenates one Null-terminated ASCII string with a maximum length to the\r
end of another Null-terminated ASCII string, and returns the concatenated\r
Destination is returned unmodified. If Source and Destination overlap, then\r
the results are undefined.\r
\r
- If Destination is NULL, then ASSERT().\r
- If Source is NULL, then ASSERT().\r
+ If Length > 0 and Destination is NULL, then ASSERT().\r
+ If Length > 0 and Source is NULL, then ASSERT().\r
If Source and Destination overlap, then ASSERT().\r
- If PcdMaximumAsciiStringLength is not zero, and Destination contains more\r
- than PcdMaximumAsciiStringLength ASCII characters, then ASSERT().\r
+ If PcdMaximumAsciiStringLength is not zero, and Destination contains more than\r
+ PcdMaximumAsciiStringLength ASCII characters not including the Null-terminator,\r
+ then ASSERT().\r
If PcdMaximumAsciiStringLength is not zero, and Source contains more than\r
- PcdMaximumAsciiStringLength ASCII characters, then ASSERT().\r
+ PcdMaximumAsciiStringLength ASCII characters not including the Null-terminator,\r
+ then ASSERT().\r
If PcdMaximumAsciiStringLength is not zero, and concatenating Destination and\r
Source results in a ASCII string with more than PcdMaximumAsciiStringLength\r
- ASCII characters, then ASSERT().\r
+ ASCII characters not including the Null-terminator, then ASSERT().\r
\r
@param Destination Pointer to a Null-terminated ASCII string.\r
@param Source Pointer to a Null-terminated ASCII string.\r
IN UINTN Length\r
);\r
\r
-//\r
-// LIST_ENTRY definition\r
-//\r
-typedef struct _LIST_ENTRY LIST_ENTRY;\r
\r
-struct _LIST_ENTRY {\r
- LIST_ENTRY *ForwardLink;\r
- LIST_ENTRY *BackLink;\r
-};\r
+/**\r
+ Returns the first occurance of a Null-terminated ASCII sub-string\r
+ in a Null-terminated ASCII string.\r
\r
-//\r
-// Linked List Functions and Macros\r
-//\r
+ This function scans the contents of the ASCII string specified by String\r
+ and returns the first occurrence of SearchString. If SearchString is not\r
+ found in String, then NULL is returned. If the length of SearchString is zero,\r
+ then String is returned.\r
\r
-/**\r
- Initializes the head node of a doubly linked list that is declared as a\r
- global variable in a module.\r
+ If String is NULL, then ASSERT().\r
+ If SearchString is NULL, then ASSERT().\r
\r
- Initializes the forward and backward links of a new linked list. After\r
- initializing a linked list with this macro, the other linked list functions\r
- may be used to add and remove nodes from the linked list. This macro results\r
- in smaller executables by initializing the linked list in the data section,\r
- instead if calling the InitializeListHead() function to perform the\r
- equivalent operation.\r
+ If PcdMaximumAsciiStringLength is not zero, and SearchString or\r
+ String contains more than PcdMaximumAsciiStringLength Unicode characters\r
+ not including the Null-terminator, then ASSERT().\r
\r
- @param ListHead The head note of a list to initiailize.\r
+ @param String Pointer to a Null-terminated ASCII string.\r
+ @param SearchString Pointer to a Null-terminated ASCII string to search for.\r
+\r
+ @retval NULL If the SearchString does not appear in String.\r
+ @return others If there is a match.\r
\r
**/\r
-#define INITIALIZE_LIST_HEAD_VARIABLE(ListHead) {&ListHead, &ListHead}\r
+CHAR8 *\r
+EFIAPI\r
+AsciiStrStr (\r
+ IN CONST CHAR8 *String,\r
+ IN CONST CHAR8 *SearchString\r
+ );\r
+\r
\r
/**\r
- Initializes the head node of a doubly linked list, and returns the pointer to\r
- the head node of the doubly linked list.\r
+ Convert a Null-terminated ASCII decimal string to a value of type\r
+ UINTN.\r
\r
- Initializes the forward and backward links of a new linked list. After\r
- initializing a linked list with this function, the other linked list\r
- functions may be used to add and remove nodes from the linked list. It is up\r
- to the caller of this function to allocate the memory for ListHead.\r
+ This function returns a value of type UINTN by interpreting the contents\r
+ of the ASCII string String as a decimal number. The format of the input\r
+ ASCII string String is:\r
\r
- If ListHead is NULL, then ASSERT().\r
+ [spaces] [decimal digits].\r
\r
- @param ListHead A pointer to the head node of a new doubly linked list.\r
+ The valid decimal digit character is in the range [0-9]. The function will\r
+ ignore the pad space, which includes spaces or tab characters, before the digits.\r
+ The running zero in the beginning of [decimal digits] will be ignored. Then, the\r
+ function stops at the first character that is a not a valid decimal character or\r
+ Null-terminator, whichever on comes first.\r
\r
- @return ListHead\r
+ If String has only pad spaces, then 0 is returned.\r
+ If String has no pad spaces or valid decimal digits, then 0 is returned.\r
+ If the number represented by String overflows according to the range defined by\r
+ UINTN, then ASSERT().\r
+ If String is NULL, then ASSERT().\r
+ If PcdMaximumAsciiStringLength is not zero, and String contains more than\r
+ PcdMaximumAsciiStringLength ASCII characters not including the Null-terminator,\r
+ then ASSERT().\r
+\r
+ @param String Pointer to a Null-terminated ASCII string.\r
+\r
+ @retval Value translated from String.\r
\r
**/\r
-LIST_ENTRY *\r
+UINTN\r
EFIAPI\r
-InitializeListHead (\r
- IN LIST_ENTRY *ListHead\r
+AsciiStrDecimalToUintn (\r
+ IN CONST CHAR8 *String\r
);\r
\r
+\r
/**\r
- Adds a node to the beginning of a doubly linked list, and returns the pointer\r
- to the head node of the doubly linked list.\r
+ Convert a Null-terminated ASCII decimal string to a value of type\r
+ UINT64.\r
\r
- Adds the node Entry at the beginning of the doubly linked list denoted by\r
- ListHead, and returns ListHead.\r
+ This function returns a value of type UINT64 by interpreting the contents\r
+ of the ASCII string String as a decimal number. The format of the input\r
+ ASCII string String is:\r
\r
- If ListHead is NULL, then ASSERT().\r
- If Entry is NULL, then ASSERT().\r
- If ListHead was not initialized with InitializeListHead(), then ASSERT().\r
- If PcdMaximumLinkedListLenth is not zero, and ListHead contains more than\r
- PcdMaximumLinkedListLenth nodes, then ASSERT().\r
+ [spaces] [decimal digits].\r
\r
- @param ListHead A pointer to the head node of a doubly linked list.\r
- @param Entry A pointer to a node that is to be inserted at the beginning\r
- of a doubly linked list.\r
+ The valid decimal digit character is in the range [0-9]. The function will\r
+ ignore the pad space, which includes spaces or tab characters, before the digits.\r
+ The running zero in the beginning of [decimal digits] will be ignored. Then, the\r
+ function stops at the first character that is a not a valid decimal character or\r
+ Null-terminator, whichever on comes first.\r
\r
- @return ListHead\r
+ If String has only pad spaces, then 0 is returned.\r
+ If String has no pad spaces or valid decimal digits, then 0 is returned.\r
+ If the number represented by String overflows according to the range defined by\r
+ UINT64, then ASSERT().\r
+ If String is NULL, then ASSERT().\r
+ If PcdMaximumAsciiStringLength is not zero, and String contains more than\r
+ PcdMaximumAsciiStringLength ASCII characters not including the Null-terminator,\r
+ then ASSERT().\r
+\r
+ @param String Pointer to a Null-terminated ASCII string.\r
+\r
+ @retval Value translated from String.\r
\r
**/\r
-LIST_ENTRY *\r
+UINT64\r
EFIAPI\r
-InsertHeadList (\r
- IN LIST_ENTRY *ListHead,\r
- IN LIST_ENTRY *Entry\r
+AsciiStrDecimalToUint64 (\r
+ IN CONST CHAR8 *String\r
);\r
\r
+\r
+/**\r
+ Convert a Null-terminated ASCII hexadecimal string to a value of type UINTN.\r
+\r
+ This function returns a value of type UINTN by interpreting the contents of\r
+ the ASCII string String as a hexadecimal number. The format of the input ASCII\r
+ string String is:\r
+\r
+ [spaces][zeros][x][hexadecimal digits].\r
+\r
+ The valid hexadecimal digit character is in the range [0-9], [a-f] and [A-F].\r
+ The prefix "0x" is optional. Both "x" and "X" is allowed in "0x" prefix. If "x"\r
+ appears in the input string, it must be prefixed with at least one 0. The function\r
+ will ignore the pad space, which includes spaces or tab characters, before [zeros],\r
+ [x] or [hexadecimal digits]. The running zero before [x] or [hexadecimal digits]\r
+ will be ignored. Then, the decoding starts after [x] or the first valid hexadecimal\r
+ digit. Then, the function stops at the first character that is a not a valid\r
+ hexadecimal character or Null-terminator, whichever on comes first.\r
+\r
+ If String has only pad spaces, then 0 is returned.\r
+ If String has no leading pad spaces, leading zeros or valid hexadecimal digits, then\r
+ 0 is returned.\r
+\r
+ If the number represented by String overflows according to the range defined by UINTN,\r
+ then ASSERT().\r
+ If String is NULL, then ASSERT().\r
+ If PcdMaximumAsciiStringLength is not zero,\r
+ and String contains more than PcdMaximumAsciiStringLength ASCII characters not including\r
+ the Null-terminator, then ASSERT().\r
+\r
+ @param String Pointer to a Null-terminated ASCII string.\r
+\r
+ @retval Value translated from String.\r
+\r
+**/\r
+UINTN\r
+EFIAPI\r
+AsciiStrHexToUintn (\r
+ IN CONST CHAR8 *String\r
+ );\r
+\r
+\r
+/**\r
+ Convert a Null-terminated ASCII hexadecimal string to a value of type UINT64.\r
+\r
+ This function returns a value of type UINT64 by interpreting the contents of\r
+ the ASCII string String as a hexadecimal number. The format of the input ASCII\r
+ string String is:\r
+\r
+ [spaces][zeros][x][hexadecimal digits].\r
+\r
+ The valid hexadecimal digit character is in the range [0-9], [a-f] and [A-F].\r
+ The prefix "0x" is optional. Both "x" and "X" is allowed in "0x" prefix. If "x"\r
+ appears in the input string, it must be prefixed with at least one 0. The function\r
+ will ignore the pad space, which includes spaces or tab characters, before [zeros],\r
+ [x] or [hexadecimal digits]. The running zero before [x] or [hexadecimal digits]\r
+ will be ignored. Then, the decoding starts after [x] or the first valid hexadecimal\r
+ digit. Then, the function stops at the first character that is a not a valid\r
+ hexadecimal character or Null-terminator, whichever on comes first.\r
+\r
+ If String has only pad spaces, then 0 is returned.\r
+ If String has no leading pad spaces, leading zeros or valid hexadecimal digits, then\r
+ 0 is returned.\r
+\r
+ If the number represented by String overflows according to the range defined by UINT64,\r
+ then ASSERT().\r
+ If String is NULL, then ASSERT().\r
+ If PcdMaximumAsciiStringLength is not zero,\r
+ and String contains more than PcdMaximumAsciiStringLength ASCII characters not including\r
+ the Null-terminator, then ASSERT().\r
+\r
+ @param String Pointer to a Null-terminated ASCII string.\r
+\r
+ @retval Value translated from String.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+AsciiStrHexToUint64 (\r
+ IN CONST CHAR8 *String\r
+ );\r
+\r
+\r
+/**\r
+ Convert one Null-terminated ASCII string to a Null-terminated\r
+ Unicode string and returns the Unicode string.\r
+\r
+ This function converts the contents of the ASCII string Source to the Unicode\r
+ string Destination, and returns Destination. The function terminates the\r
+ Unicode string Destination by appending a Null-terminator character at the end.\r
+ The caller is responsible to make sure Destination points to a buffer with size\r
+ equal or greater than ((AsciiStrLen (Source) + 1) * sizeof (CHAR16)) in bytes.\r
+\r
+ If Destination is NULL, then ASSERT().\r
+ If Destination is not aligned on a 16-bit boundary, then ASSERT().\r
+ If Source is NULL, then ASSERT().\r
+ If Source and Destination overlap, then ASSERT().\r
+ If PcdMaximumAsciiStringLength is not zero, and Source contains more than\r
+ PcdMaximumAsciiStringLength ASCII characters not including the Null-terminator,\r
+ then ASSERT().\r
+ If PcdMaximumUnicodeStringLength is not zero, and Source contains more than\r
+ PcdMaximumUnicodeStringLength ASCII characters not including the\r
+ Null-terminator, then ASSERT().\r
+\r
+ @param Source Pointer to a Null-terminated ASCII string.\r
+ @param Destination Pointer to a Null-terminated Unicode string.\r
+\r
+ @return Destination\r
+\r
+**/\r
+CHAR16 *\r
+EFIAPI\r
+AsciiStrToUnicodeStr (\r
+ IN CONST CHAR8 *Source,\r
+ OUT CHAR16 *Destination\r
+ );\r
+\r
+\r
+/**\r
+ Converts an 8-bit value to an 8-bit BCD value.\r
+\r
+ Converts the 8-bit value specified by Value to BCD. The BCD value is\r
+ returned.\r
+\r
+ If Value >= 100, then ASSERT().\r
+\r
+ @param Value The 8-bit value to convert to BCD. Range 0..99.\r
+\r
+ @return The BCD value\r
+\r
+**/\r
+UINT8\r
+EFIAPI\r
+DecimalToBcd8 (\r
+ IN UINT8 Value\r
+ );\r
+\r
+\r
+/**\r
+ Converts an 8-bit BCD value to an 8-bit value.\r
+\r
+ Converts the 8-bit BCD value specified by Value to an 8-bit value. The 8-bit\r
+ value is returned.\r
+\r
+ If Value >= 0xA0, then ASSERT().\r
+ If (Value & 0x0F) >= 0x0A, then ASSERT().\r
+\r
+ @param Value The 8-bit BCD value to convert to an 8-bit value.\r
+\r
+ @return The 8-bit value is returned.\r
+\r
+**/\r
+UINT8\r
+EFIAPI\r
+BcdToDecimal8 (\r
+ IN UINT8 Value\r
+ );\r
+\r
+\r
+//\r
+// Linked List Functions and Macros\r
+//\r
+\r
+/**\r
+ Initializes the head node of a doubly linked list that is declared as a\r
+ global variable in a module.\r
+\r
+ Initializes the forward and backward links of a new linked list. After\r
+ initializing a linked list with this macro, the other linked list functions\r
+ may be used to add and remove nodes from the linked list. This macro results\r
+ in smaller executables by initializing the linked list in the data section,\r
+ instead if calling the InitializeListHead() function to perform the\r
+ equivalent operation.\r
+\r
+ @param ListHead The head note of a list to initiailize.\r
+\r
+**/\r
+#define INITIALIZE_LIST_HEAD_VARIABLE(ListHead) {&ListHead, &ListHead}\r
+\r
+\r
+/**\r
+ Initializes the head node of a doubly linked list, and returns the pointer to\r
+ the head node of the doubly linked list.\r
+\r
+ Initializes the forward and backward links of a new linked list. After\r
+ initializing a linked list with this function, the other linked list\r
+ functions may be used to add and remove nodes from the linked list. It is up\r
+ to the caller of this function to allocate the memory for ListHead.\r
+\r
+ If ListHead is NULL, then ASSERT().\r
+\r
+ @param ListHead A pointer to the head node of a new doubly linked list.\r
+\r
+ @return ListHead\r
+\r
+**/\r
+LIST_ENTRY *\r
+EFIAPI\r
+InitializeListHead (\r
+ IN OUT LIST_ENTRY *ListHead\r
+ );\r
+\r
+\r
+/**\r
+ Adds a node to the beginning of a doubly linked list, and returns the pointer\r
+ to the head node of the doubly linked list.\r
+\r
+ Adds the node Entry at the beginning of the doubly linked list denoted by\r
+ ListHead, and returns ListHead.\r
+\r
+ If ListHead is NULL, then ASSERT().\r
+ If Entry is NULL, then ASSERT().\r
+ If ListHead was not initialized with InitializeListHead(), then ASSERT().\r
+ If PcdMaximumLinkedListLenth is not zero, and prior to insertion the number\r
+ of nodes in ListHead, including the ListHead node, is greater than or\r
+ equal to PcdMaximumLinkedListLength, then ASSERT().\r
+\r
+ @param ListHead A pointer to the head node of a doubly linked list.\r
+ @param Entry A pointer to a node that is to be inserted at the beginning\r
+ of a doubly linked list.\r
+\r
+ @return ListHead\r
+\r
+**/\r
+LIST_ENTRY *\r
+EFIAPI\r
+InsertHeadList (\r
+ IN OUT LIST_ENTRY *ListHead,\r
+ IN OUT LIST_ENTRY *Entry\r
+ );\r
+\r
+\r
/**\r
Adds a node to the end of a doubly linked list, and returns the pointer to\r
the head node of the doubly linked list.\r
If ListHead is NULL, then ASSERT().\r
If Entry is NULL, then ASSERT().\r
If ListHead was not initialized with InitializeListHead(), then ASSERT().\r
- If PcdMaximumLinkedListLenth is not zero, and ListHead contains more than\r
- PcdMaximumLinkedListLenth nodes, then ASSERT().\r
+ If PcdMaximumLinkedListLenth is not zero, and prior to insertion the number\r
+ of nodes in ListHead, including the ListHead node, is greater than or\r
+ equal to PcdMaximumLinkedListLength, then ASSERT().\r
\r
@param ListHead A pointer to the head node of a doubly linked list.\r
@param Entry A pointer to a node that is to be added at the end of the\r
LIST_ENTRY *\r
EFIAPI\r
InsertTailList (\r
- IN LIST_ENTRY *ListHead,\r
- IN LIST_ENTRY *Entry\r
+ IN OUT LIST_ENTRY *ListHead,\r
+ IN OUT LIST_ENTRY *Entry\r
);\r
\r
+\r
/**\r
Retrieves the first node of a doubly linked list.\r
\r
\r
If List is NULL, then ASSERT().\r
If List was not initialized with InitializeListHead(), then ASSERT().\r
- If PcdMaximumLinkedListLenth is not zero, and List contains more than\r
- PcdMaximumLinkedListLenth nodes, then ASSERT().\r
+ If PcdMaximumLinkedListLenth is not zero, and the number of nodes\r
+ in List, including the List node, is greater than or equal to\r
+ PcdMaximumLinkedListLength, then ASSERT().\r
\r
@param List A pointer to the head node of a doubly linked list.\r
\r
IN CONST LIST_ENTRY *List\r
);\r
\r
+\r
/**\r
Retrieves the next node of a doubly linked list.\r
\r
IN CONST LIST_ENTRY *Node\r
);\r
\r
+\r
/**\r
Checks to see if a doubly linked list is empty or not.\r
\r
\r
If ListHead is NULL, then ASSERT().\r
If ListHead was not initialized with InitializeListHead(), then ASSERT().\r
- If PcdMaximumLinkedListLenth is not zero, and List contains more than\r
- PcdMaximumLinkedListLenth nodes, then ASSERT().\r
+ If PcdMaximumLinkedListLenth is not zero, and the number of nodes\r
+ in List, including the List node, is greater than or equal to\r
+ PcdMaximumLinkedListLength, then ASSERT().\r
\r
@param ListHead A pointer to the head node of a doubly linked list.\r
\r
IN CONST LIST_ENTRY *ListHead\r
);\r
\r
+\r
/**\r
- Determines if a node in a doubly linked list is null.\r
+ Determines if a node in a doubly linked list is the head node of a the same\r
+ doubly linked list. This function is typically used to terminate a loop that\r
+ traverses all the nodes in a doubly linked list starting with the head node.\r
\r
- Returns FALSE if Node is one of the nodes in the doubly linked list specified\r
- by List. Otherwise, TRUE is returned. List must have been initialized with\r
- InitializeListHead().\r
+ Returns TRUE if Node is equal to List. Returns FALSE if Node is one of the\r
+ nodes in the doubly linked list specified by List. List must have been\r
+ initialized with InitializeListHead().\r
\r
If List is NULL, then ASSERT().\r
If Node is NULL, then ASSERT().\r
If List was not initialized with InitializeListHead(), then ASSERT().\r
- If PcdMaximumLinkedListLenth is not zero, and List contains more than\r
- PcdMaximumLinkedListLenth nodes, then ASSERT().\r
+ If PcdMaximumLinkedListLenth is not zero, and the number of nodes\r
+ in List, including the List node, is greater than or equal to\r
+ PcdMaximumLinkedListLength, then ASSERT().\r
If Node is not a node in List and Node is not equal to List, then ASSERT().\r
\r
@param List A pointer to the head node of a doubly linked list.\r
- @param Node A pointer to a node in the doubly linked list.\r
+ @param Node A pointer to a node in the doubly linked list.\r
\r
@retval TRUE Node is one of the nodes in the doubly linked list.\r
@retval FALSE Node is not one of the nodes in the doubly linked list.\r
IN CONST LIST_ENTRY *Node\r
);\r
\r
+\r
/**\r
Determines if a node the last node in a doubly linked list.\r
\r
If List is NULL, then ASSERT().\r
If Node is NULL, then ASSERT().\r
If List was not initialized with InitializeListHead(), then ASSERT().\r
- If PcdMaximumLinkedListLenth is not zero, and List contains more than\r
- PcdMaximumLinkedListLenth nodes, then ASSERT().\r
+ If PcdMaximumLinkedListLenth is not zero, and the number of nodes\r
+ in List, including the List node, is greater than or equal to\r
+ PcdMaximumLinkedListLength, then ASSERT().\r
If Node is not a node in List, then ASSERT().\r
\r
@param List A pointer to the head node of a doubly linked list.\r
- @param Node A pointer to a node in the doubly linked list.\r
+ @param Node A pointer to a node in the doubly linked list.\r
\r
@retval TRUE Node is the last node in the linked list.\r
@retval FALSE Node is not the last node in the linked list.\r
IN CONST LIST_ENTRY *Node\r
);\r
\r
+\r
/**\r
Swaps the location of two nodes in a doubly linked list, and returns the\r
first node after the swap.\r
If FirstEntry is NULL, then ASSERT().\r
If SecondEntry is NULL, then ASSERT().\r
If SecondEntry and FirstEntry are not in the same linked list, then ASSERT().\r
- If PcdMaximumLinkedListLenth is not zero, and the linked list containing\r
- FirstEntry and SecondEntry contains more than PcdMaximumLinkedListLenth\r
- nodes, then ASSERT().\r
+ If PcdMaximumLinkedListLength is not zero, and the number of nodes in the\r
+ linked list containing the FirstEntry and SecondEntry nodes, including\r
+ the FirstEntry and SecondEntry nodes, is greater than or equal to\r
+ PcdMaximumLinkedListLength, then ASSERT().\r
\r
@param FirstEntry A pointer to a node in a linked list.\r
@param SecondEntry A pointer to another node in the same linked list.\r
+ \r
+ @return SecondEntry\r
\r
**/\r
LIST_ENTRY *\r
EFIAPI\r
SwapListEntries (\r
- IN LIST_ENTRY *FirstEntry,\r
- IN LIST_ENTRY *SecondEntry\r
+ IN OUT LIST_ENTRY *FirstEntry,\r
+ IN OUT LIST_ENTRY *SecondEntry\r
);\r
\r
+\r
/**\r
Removes a node from a doubly linked list, and returns the node that follows\r
the removed node.\r
\r
If Entry is NULL, then ASSERT().\r
If Entry is the head node of an empty list, then ASSERT().\r
- If PcdMaximumLinkedListLenth is not zero, and the linked list containing\r
- Entry contains more than PcdMaximumLinkedListLenth nodes, then ASSERT().\r
+ If PcdMaximumLinkedListLength is not zero, and the number of nodes in the\r
+ linked list containing Entry, including the Entry node, is greater than\r
+ or equal to PcdMaximumLinkedListLength, then ASSERT().\r
\r
@param Entry A pointer to a node in a linked list\r
\r
IN UINTN Count\r
);\r
\r
+\r
/**\r
Shifts a 64-bit integer right between 0 and 63 bits. This high bits are\r
filled with zeros. The shifted value is returned.\r
IN UINTN Count\r
);\r
\r
+\r
/**\r
Shifts a 64-bit integer right between 0 and 63 bits. The high bits are filled\r
with original integer's bit 63. The shifted value is returned.\r
IN UINTN Count\r
);\r
\r
+\r
/**\r
Rotates a 32-bit integer left between 0 and 31 bits, filling the low bits\r
with the high bits that were rotated.\r
IN UINTN Count\r
);\r
\r
+\r
/**\r
Rotates a 32-bit integer right between 0 and 31 bits, filling the high bits\r
with the low bits that were rotated.\r
IN UINTN Count\r
);\r
\r
+\r
/**\r
Rotates a 64-bit integer left between 0 and 63 bits, filling the low bits\r
with the high bits that were rotated.\r
IN UINTN Count\r
);\r
\r
+\r
/**\r
Rotates a 64-bit integer right between 0 and 63 bits, filling the high bits\r
with the high low bits that were rotated.\r
IN UINTN Count\r
);\r
\r
+\r
/**\r
Returns the bit position of the lowest bit set in a 32-bit value.\r
\r
IN UINT32 Operand\r
);\r
\r
+\r
/**\r
Returns the bit position of the lowest bit set in a 64-bit value.\r
\r
IN UINT64 Operand\r
);\r
\r
+\r
/**\r
Returns the bit position of the highest bit set in a 32-bit value. Equivalent\r
to log2(x).\r
IN UINT32 Operand\r
);\r
\r
+\r
/**\r
Returns the bit position of the highest bit set in a 64-bit value. Equivalent\r
to log2(x).\r
IN UINT64 Operand\r
);\r
\r
+\r
/**\r
Returns the value of the highest bit set in a 32-bit value. Equivalent to\r
1 << HighBitSet32(x).\r
IN UINT32 Operand\r
);\r
\r
+\r
/**\r
Returns the value of the highest bit set in a 64-bit value. Equivalent to\r
1 << HighBitSet64(x).\r
IN UINT64 Operand\r
);\r
\r
+\r
/**\r
Switches the endianess of a 16-bit integer.\r
\r
from little endian to big endian or vice versa. The byte swapped value is\r
returned.\r
\r
- @param Operand A 16-bit unsigned value.\r
+ @param Value Operand A 16-bit unsigned value.\r
\r
@return The byte swaped Operand.\r
\r
IN UINT16 Value\r
);\r
\r
+\r
/**\r
Switches the endianess of a 32-bit integer.\r
\r
from little endian to big endian or vice versa. The byte swapped value is\r
returned.\r
\r
- @param Operand A 32-bit unsigned value.\r
+ @param Value Operand A 32-bit unsigned value.\r
\r
@return The byte swaped Operand.\r
\r
IN UINT32 Value\r
);\r
\r
+\r
/**\r
Switches the endianess of a 64-bit integer.\r
\r
from little endian to big endian or vice versa. The byte swapped value is\r
returned.\r
\r
- @param Operand A 64-bit unsigned value.\r
+ @param Value Operand A 64-bit unsigned value.\r
\r
@return The byte swaped Operand.\r
\r
IN UINT64 Value\r
);\r
\r
+\r
/**\r
Multiples a 64-bit unsigned integer by a 32-bit unsigned integer and\r
generates a 64-bit unsigned result.\r
IN UINT32 Multiplier\r
);\r
\r
+\r
/**\r
Multiples a 64-bit unsigned integer by a 64-bit unsigned integer and\r
generates a 64-bit unsigned result.\r
IN UINT64 Multiplier\r
);\r
\r
+\r
/**\r
Multiples a 64-bit signed integer by a 64-bit signed integer and generates a\r
64-bit signed result.\r
IN INT64 Multiplier\r
);\r
\r
+\r
/**\r
Divides a 64-bit unsigned integer by a 32-bit unsigned integer and generates\r
a 64-bit unsigned result.\r
IN UINT32 Divisor\r
);\r
\r
+\r
/**\r
Divides a 64-bit unsigned integer by a 32-bit unsigned integer and generates\r
a 32-bit unsigned remainder.\r
IN UINT32 Divisor\r
);\r
\r
+\r
/**\r
Divides a 64-bit unsigned integer by a 32-bit unsigned integer and generates\r
a 64-bit unsigned result and an optional 32-bit unsigned remainder.\r
OUT UINT32 *Remainder OPTIONAL\r
);\r
\r
+\r
/**\r
Divides a 64-bit unsigned integer by a 64-bit unsigned integer and generates\r
a 64-bit unsigned result and an optional 64-bit unsigned remainder.\r
OUT UINT64 *Remainder OPTIONAL\r
);\r
\r
+\r
/**\r
Divides a 64-bit signed integer by a 64-bit signed integer and generates a\r
64-bit signed result and a optional 64-bit signed remainder.\r
OUT INT64 *Remainder OPTIONAL\r
);\r
\r
+\r
/**\r
Reads a 16-bit value from memory that may be unaligned.\r
\r
\r
@param Buffer Pointer to a 16-bit value that may be unaligned.\r
\r
- @return *Uint16\r
+ @return The 16-bit value read from Buffer.\r
\r
**/\r
UINT16\r
EFIAPI\r
ReadUnaligned16 (\r
- IN CONST UINT16 *Uint16\r
+ IN CONST UINT16 *Buffer\r
);\r
\r
+\r
/**\r
Writes a 16-bit value to memory that may be unaligned.\r
\r
@param Buffer Pointer to a 16-bit value that may be unaligned.\r
@param Value 16-bit value to write to Buffer.\r
\r
- @return Value\r
+ @return The 16-bit value to write to Buffer.\r
\r
**/\r
UINT16\r
EFIAPI\r
WriteUnaligned16 (\r
- OUT UINT16 *Uint16,\r
- IN UINT16 Value\r
+ OUT UINT16 *Buffer,\r
+ IN UINT16 Value\r
);\r
\r
+\r
/**\r
Reads a 24-bit value from memory that may be unaligned.\r
\r
\r
@param Buffer Pointer to a 24-bit value that may be unaligned.\r
\r
- @return The value read.\r
+ @return The 24-bit value read from Buffer.\r
\r
**/\r
UINT32\r
EFIAPI\r
ReadUnaligned24 (\r
- IN CONST UINT32 *Buffer\r
+ IN CONST UINT32 *Buffer\r
);\r
\r
+\r
/**\r
Writes a 24-bit value to memory that may be unaligned.\r
\r
@param Buffer Pointer to a 24-bit value that may be unaligned.\r
@param Value 24-bit value to write to Buffer.\r
\r
- @return The value written.\r
+ @return The 24-bit value to write to Buffer.\r
\r
**/\r
UINT32\r
EFIAPI\r
WriteUnaligned24 (\r
- OUT UINT32 *Buffer,\r
- IN UINT32 Value\r
+ OUT UINT32 *Buffer,\r
+ IN UINT32 Value\r
);\r
\r
+\r
/**\r
Reads a 32-bit value from memory that may be unaligned.\r
\r
\r
@param Buffer Pointer to a 32-bit value that may be unaligned.\r
\r
- @return *Uint32\r
+ @return The 32-bit value read from Buffer.\r
\r
**/\r
UINT32\r
EFIAPI\r
ReadUnaligned32 (\r
- IN CONST UINT32 *Uint32\r
+ IN CONST UINT32 *Buffer\r
);\r
\r
+\r
/**\r
Writes a 32-bit value to memory that may be unaligned.\r
\r
@param Buffer Pointer to a 32-bit value that may be unaligned.\r
@param Value 32-bit value to write to Buffer.\r
\r
- @return Value\r
+ @return The 32-bit value to write to Buffer.\r
\r
**/\r
UINT32\r
EFIAPI\r
WriteUnaligned32 (\r
- OUT UINT32 *Uint32,\r
- IN UINT32 Value\r
+ OUT UINT32 *Buffer,\r
+ IN UINT32 Value\r
);\r
\r
+\r
/**\r
Reads a 64-bit value from memory that may be unaligned.\r
\r
\r
@param Buffer Pointer to a 64-bit value that may be unaligned.\r
\r
- @return *Uint64\r
+ @return The 64-bit value read from Buffer.\r
\r
**/\r
UINT64\r
EFIAPI\r
ReadUnaligned64 (\r
- IN CONST UINT64 *Uint64\r
+ IN CONST UINT64 *Buffer\r
);\r
\r
+\r
/**\r
Writes a 64-bit value to memory that may be unaligned.\r
\r
@param Buffer Pointer to a 64-bit value that may be unaligned.\r
@param Value 64-bit value to write to Buffer.\r
\r
- @return Value\r
+ @return The 64-bit value to write to Buffer.\r
\r
**/\r
UINT64\r
EFIAPI\r
WriteUnaligned64 (\r
- OUT UINT64 *Uint64,\r
- IN UINT64 Value\r
+ OUT UINT64 *Buffer,\r
+ IN UINT64 Value\r
);\r
\r
+\r
//\r
// Bit Field Functions\r
//\r
If 8-bit operations are not supported, then ASSERT().\r
If StartBit is greater than 7, then ASSERT().\r
If EndBit is greater than 7, then ASSERT().\r
- If EndBit is less than or equal to StartBit, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
\r
@param Operand Operand on which to perform the bitfield operation.\r
@param StartBit The ordinal of the least significant bit in the bit field.\r
IN UINTN EndBit\r
);\r
\r
+\r
/**\r
Writes a bit field to an 8-bit value, and returns the result.\r
\r
If 8-bit operations are not supported, then ASSERT().\r
If StartBit is greater than 7, then ASSERT().\r
If EndBit is greater than 7, then ASSERT().\r
- If EndBit is less than or equal to StartBit, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
\r
@param Operand Operand on which to perform the bitfield operation.\r
@param StartBit The ordinal of the least significant bit in the bit field.\r
IN UINT8 Value\r
);\r
\r
+\r
/**\r
Reads a bit field from an 8-bit value, performs a bitwise OR, and returns the\r
result.\r
If 8-bit operations are not supported, then ASSERT().\r
If StartBit is greater than 7, then ASSERT().\r
If EndBit is greater than 7, then ASSERT().\r
- If EndBit is less than or equal to StartBit, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
\r
@param Operand Operand on which to perform the bitfield operation.\r
@param StartBit The ordinal of the least significant bit in the bit field.\r
IN UINT8 OrData\r
);\r
\r
+\r
/**\r
Reads a bit field from an 8-bit value, performs a bitwise AND, and returns\r
the result.\r
If 8-bit operations are not supported, then ASSERT().\r
If StartBit is greater than 7, then ASSERT().\r
If EndBit is greater than 7, then ASSERT().\r
- If EndBit is less than or equal to StartBit, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
\r
@param Operand Operand on which to perform the bitfield operation.\r
@param StartBit The ordinal of the least significant bit in the bit field.\r
IN UINT8 AndData\r
);\r
\r
+\r
/**\r
Reads a bit field from an 8-bit value, performs a bitwise AND followed by a\r
bitwise OR, and returns the result.\r
If 8-bit operations are not supported, then ASSERT().\r
If StartBit is greater than 7, then ASSERT().\r
If EndBit is greater than 7, then ASSERT().\r
- If EndBit is less than or equal to StartBit, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
\r
@param Operand Operand on which to perform the bitfield operation.\r
@param StartBit The ordinal of the least significant bit in the bit field.\r
IN UINT8 OrData\r
);\r
\r
+\r
/**\r
Returns a bit field from a 16-bit value.\r
\r
If 16-bit operations are not supported, then ASSERT().\r
If StartBit is greater than 15, then ASSERT().\r
If EndBit is greater than 15, then ASSERT().\r
- If EndBit is less than or equal to StartBit, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
\r
@param Operand Operand on which to perform the bitfield operation.\r
@param StartBit The ordinal of the least significant bit in the bit field.\r
IN UINTN EndBit\r
);\r
\r
+\r
/**\r
Writes a bit field to a 16-bit value, and returns the result.\r
\r
If 16-bit operations are not supported, then ASSERT().\r
If StartBit is greater than 15, then ASSERT().\r
If EndBit is greater than 15, then ASSERT().\r
- If EndBit is less than or equal to StartBit, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
\r
@param Operand Operand on which to perform the bitfield operation.\r
@param StartBit The ordinal of the least significant bit in the bit field.\r
IN UINT16 Value\r
);\r
\r
+\r
/**\r
Reads a bit field from a 16-bit value, performs a bitwise OR, and returns the\r
result.\r
If 16-bit operations are not supported, then ASSERT().\r
If StartBit is greater than 15, then ASSERT().\r
If EndBit is greater than 15, then ASSERT().\r
- If EndBit is less than or equal to StartBit, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
\r
@param Operand Operand on which to perform the bitfield operation.\r
@param StartBit The ordinal of the least significant bit in the bit field.\r
IN UINT16 OrData\r
);\r
\r
+\r
/**\r
Reads a bit field from a 16-bit value, performs a bitwise AND, and returns\r
the result.\r
If 16-bit operations are not supported, then ASSERT().\r
If StartBit is greater than 15, then ASSERT().\r
If EndBit is greater than 15, then ASSERT().\r
- If EndBit is less than or equal to StartBit, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
\r
@param Operand Operand on which to perform the bitfield operation.\r
@param StartBit The ordinal of the least significant bit in the bit field.\r
IN UINT16 AndData\r
);\r
\r
+\r
/**\r
Reads a bit field from a 16-bit value, performs a bitwise AND followed by a\r
bitwise OR, and returns the result.\r
If 16-bit operations are not supported, then ASSERT().\r
If StartBit is greater than 15, then ASSERT().\r
If EndBit is greater than 15, then ASSERT().\r
- If EndBit is less than or equal to StartBit, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
\r
@param Operand Operand on which to perform the bitfield operation.\r
@param StartBit The ordinal of the least significant bit in the bit field.\r
IN UINT16 OrData\r
);\r
\r
+\r
/**\r
Returns a bit field from a 32-bit value.\r
\r
If 32-bit operations are not supported, then ASSERT().\r
If StartBit is greater than 31, then ASSERT().\r
If EndBit is greater than 31, then ASSERT().\r
- If EndBit is less than or equal to StartBit, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
\r
@param Operand Operand on which to perform the bitfield operation.\r
@param StartBit The ordinal of the least significant bit in the bit field.\r
IN UINTN EndBit\r
);\r
\r
+\r
/**\r
Writes a bit field to a 32-bit value, and returns the result.\r
\r
If 32-bit operations are not supported, then ASSERT().\r
If StartBit is greater than 31, then ASSERT().\r
If EndBit is greater than 31, then ASSERT().\r
- If EndBit is less than or equal to StartBit, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
\r
@param Operand Operand on which to perform the bitfield operation.\r
@param StartBit The ordinal of the least significant bit in the bit field.\r
IN UINT32 Value\r
);\r
\r
+\r
/**\r
Reads a bit field from a 32-bit value, performs a bitwise OR, and returns the\r
result.\r
If 32-bit operations are not supported, then ASSERT().\r
If StartBit is greater than 31, then ASSERT().\r
If EndBit is greater than 31, then ASSERT().\r
- If EndBit is less than or equal to StartBit, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
\r
@param Operand Operand on which to perform the bitfield operation.\r
@param StartBit The ordinal of the least significant bit in the bit field.\r
IN UINT32 OrData\r
);\r
\r
+\r
/**\r
Reads a bit field from a 32-bit value, performs a bitwise AND, and returns\r
the result.\r
If 32-bit operations are not supported, then ASSERT().\r
If StartBit is greater than 31, then ASSERT().\r
If EndBit is greater than 31, then ASSERT().\r
- If EndBit is less than or equal to StartBit, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
\r
@param Operand Operand on which to perform the bitfield operation.\r
@param StartBit The ordinal of the least significant bit in the bit field.\r
IN UINT32 AndData\r
);\r
\r
+\r
/**\r
Reads a bit field from a 32-bit value, performs a bitwise AND followed by a\r
bitwise OR, and returns the result.\r
If 32-bit operations are not supported, then ASSERT().\r
If StartBit is greater than 31, then ASSERT().\r
If EndBit is greater than 31, then ASSERT().\r
- If EndBit is less than or equal to StartBit, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
\r
@param Operand Operand on which to perform the bitfield operation.\r
@param StartBit The ordinal of the least significant bit in the bit field.\r
IN UINT32 OrData\r
);\r
\r
+\r
/**\r
Returns a bit field from a 64-bit value.\r
\r
If 64-bit operations are not supported, then ASSERT().\r
If StartBit is greater than 63, then ASSERT().\r
If EndBit is greater than 63, then ASSERT().\r
- If EndBit is less than or equal to StartBit, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
\r
@param Operand Operand on which to perform the bitfield operation.\r
@param StartBit The ordinal of the least significant bit in the bit field.\r
IN UINTN EndBit\r
);\r
\r
+\r
/**\r
Writes a bit field to a 64-bit value, and returns the result.\r
\r
If 64-bit operations are not supported, then ASSERT().\r
If StartBit is greater than 63, then ASSERT().\r
If EndBit is greater than 63, then ASSERT().\r
- If EndBit is less than or equal to StartBit, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
\r
@param Operand Operand on which to perform the bitfield operation.\r
@param StartBit The ordinal of the least significant bit in the bit field.\r
IN UINT64 Value\r
);\r
\r
+\r
/**\r
Reads a bit field from a 64-bit value, performs a bitwise OR, and returns the\r
result.\r
If 64-bit operations are not supported, then ASSERT().\r
If StartBit is greater than 63, then ASSERT().\r
If EndBit is greater than 63, then ASSERT().\r
- If EndBit is less than or equal to StartBit, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
\r
@param Operand Operand on which to perform the bitfield operation.\r
@param StartBit The ordinal of the least significant bit in the bit field.\r
IN UINT64 OrData\r
);\r
\r
+\r
/**\r
Reads a bit field from a 64-bit value, performs a bitwise AND, and returns\r
the result.\r
If 64-bit operations are not supported, then ASSERT().\r
If StartBit is greater than 63, then ASSERT().\r
If EndBit is greater than 63, then ASSERT().\r
- If EndBit is less than or equal to StartBit, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
\r
@param Operand Operand on which to perform the bitfield operation.\r
@param StartBit The ordinal of the least significant bit in the bit field.\r
IN UINT64 AndData\r
);\r
\r
+\r
/**\r
Reads a bit field from a 64-bit value, performs a bitwise AND followed by a\r
bitwise OR, and returns the result.\r
If 64-bit operations are not supported, then ASSERT().\r
If StartBit is greater than 63, then ASSERT().\r
If EndBit is greater than 63, then ASSERT().\r
- If EndBit is less than or equal to StartBit, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
\r
@param Operand Operand on which to perform the bitfield operation.\r
@param StartBit The ordinal of the least significant bit in the bit field.\r
IN UINT64 OrData\r
);\r
\r
+\r
//\r
// Base Library Synchronization Functions\r
//\r
VOID\r
);\r
\r
+\r
/**\r
Initializes a spin lock to the released state and returns the spin lock.\r
\r
@param SpinLock A pointer to the spin lock to initialize to the released\r
state.\r
\r
- @return SpinLock\r
+ @return SpinLock in release state.\r
\r
**/\r
SPIN_LOCK *\r
IN SPIN_LOCK *SpinLock\r
);\r
\r
+\r
/**\r
Waits until a spin lock can be placed in the acquired state.\r
\r
\r
@param SpinLock A pointer to the spin lock to place in the acquired state.\r
\r
- @return SpinLock\r
+ @return SpinLock accquired lock.\r
\r
**/\r
SPIN_LOCK *\r
EFIAPI\r
AcquireSpinLock (\r
- IN SPIN_LOCK *SpinLock\r
+ IN OUT SPIN_LOCK *SpinLock\r
);\r
\r
+\r
/**\r
Attempts to place a spin lock in the acquired state.\r
\r
BOOLEAN\r
EFIAPI\r
AcquireSpinLockOrFail (\r
- IN SPIN_LOCK *SpinLock\r
+ IN OUT SPIN_LOCK *SpinLock\r
);\r
\r
+\r
/**\r
Releases a spin lock.\r
\r
\r
@param SpinLock A pointer to the spin lock to release.\r
\r
- @return SpinLock\r
+ @return SpinLock released lock.\r
\r
**/\r
SPIN_LOCK *\r
EFIAPI\r
ReleaseSpinLock (\r
- IN SPIN_LOCK *SpinLock\r
+ IN OUT SPIN_LOCK *SpinLock\r
);\r
\r
+\r
/**\r
Performs an atomic increment of an 32-bit unsigned integer.\r
\r
IN UINT32 *Value\r
);\r
\r
+\r
/**\r
Performs an atomic decrement of an 32-bit unsigned integer.\r
\r
IN UINT32 *Value\r
);\r
\r
+\r
/**\r
Performs an atomic compare exchange operation on a 32-bit unsigned integer.\r
\r
+ Performs an atomic compare exchange operation on the 32-bit unsigned integer\r
+ specified by Value. If Value is equal to CompareValue, then Value is set to\r
+ ExchangeValue and CompareValue is returned. If Value is not equal to CompareValue,\r
+ then Value is returned. The compare exchange operation must be performed using\r
+ MP safe mechanisms.\r
+\r
+ If Value is NULL, then ASSERT().\r
+\r
@param Value A pointer to the 32-bit value for the compare exchange\r
operation.\r
@param CompareValue 32-bit value used in compare operation.\r
UINT32\r
EFIAPI\r
InterlockedCompareExchange32 (\r
- IN UINT32 *Value,\r
+ IN OUT UINT32 *Value,\r
IN UINT32 CompareValue,\r
IN UINT32 ExchangeValue\r
);\r
\r
+\r
/**\r
Performs an atomic compare exchange operation on a 64-bit unsigned integer.\r
\r
+ Performs an atomic compare exchange operation on the 64-bit unsigned integer specified\r
+ by Value. If Value is equal to CompareValue, then Value is set to ExchangeValue and\r
+ CompareValue is returned. If Value is not equal to CompareValue, then Value is returned.\r
+ The compare exchange operation must be performed using MP safe mechanisms.\r
+\r
+ If Value is NULL, then ASSERT().\r
+\r
@param Value A pointer to the 64-bit value for the compare exchange\r
operation.\r
@param CompareValue 64-bit value used in compare operation.\r
UINT64\r
EFIAPI\r
InterlockedCompareExchange64 (\r
- IN UINT64 *Value,\r
+ IN OUT UINT64 *Value,\r
IN UINT64 CompareValue,\r
IN UINT64 ExchangeValue\r
);\r
\r
+\r
/**\r
Performs an atomic compare exchange operation on a pointer value.\r
\r
@param CompareValue Pointer value used in compare operation.\r
@param ExchangeValue Pointer value used in exchange operation.\r
\r
+ @return The original *Value before exchange.\r
**/\r
VOID *\r
EFIAPI\r
InterlockedCompareExchangePointer (\r
- IN VOID **Value,\r
+ IN OUT VOID **Value,\r
IN VOID *CompareValue,\r
IN VOID *ExchangeValue\r
);\r
\r
+\r
//\r
-// Base Library CPU Functions\r
+// Base Library Checksum Functions\r
//\r
-typedef\r
-VOID\r
-(EFIAPI *SWITCH_STACK_ENTRY_POINT) (\r
- IN VOID *Context1, OPTIONAL\r
- IN VOID *Context2 OPTIONAL\r
- );\r
\r
/**\r
- Used to serialize load and store operations.\r
+ Calculate the sum of all elements in a buffer in unit of UINT8.\r
+ During calculation, the carry bits are dropped.\r
\r
- All loads and stores that proceed calls to this function are guaranteed to be\r
- globally visible when this function returns.\r
+ This function calculates the sum of all elements in a buffer\r
+ in unit of UINT8. The carry bits in result of addition are dropped.\r
+ The result is returned as UINT8. If Length is Zero, then Zero is\r
+ returned.\r
\r
-**/\r
-VOID\r
-EFIAPI\r
+ If Buffer is NULL, then ASSERT().\r
+ If Length is greater than (MAX_ADDRESS - Buffer + 1), then ASSERT().\r
+\r
+ @param Buffer Pointer to the buffer to carry out the sum operation.\r
+ @param Length The size, in bytes, of Buffer .\r
+\r
+ @return Sum The sum of Buffer with carry bits dropped during additions.\r
+\r
+**/\r
+UINT8\r
+EFIAPI\r
+CalculateSum8 (\r
+ IN CONST UINT8 *Buffer,\r
+ IN UINTN Length\r
+ );\r
+\r
+\r
+/**\r
+ Returns the two's complement checksum of all elements in a buffer\r
+ of 8-bit values.\r
+\r
+ This function first calculates the sum of the 8-bit values in the\r
+ buffer specified by Buffer and Length. The carry bits in the result\r
+ of addition are dropped. Then, the two's complement of the sum is\r
+ returned. If Length is 0, then 0 is returned.\r
+\r
+ If Buffer is NULL, then ASSERT().\r
+ If Length is greater than (MAX_ADDRESS - Buffer + 1), then ASSERT().\r
+\r
+ @param Buffer Pointer to the buffer to carry out the checksum operation.\r
+ @param Length The size, in bytes, of Buffer.\r
+\r
+ @return Checksum The 2's complement checksum of Buffer.\r
+\r
+**/\r
+UINT8\r
+EFIAPI\r
+CalculateCheckSum8 (\r
+ IN CONST UINT8 *Buffer,\r
+ IN UINTN Length\r
+ );\r
+\r
+\r
+/**\r
+ Returns the sum of all elements in a buffer of 16-bit values. During\r
+ calculation, the carry bits are dropped.\r
+\r
+ This function calculates the sum of the 16-bit values in the buffer\r
+ specified by Buffer and Length. The carry bits in result of addition are dropped.\r
+ The 16-bit result is returned. If Length is 0, then 0 is returned.\r
+\r
+ If Buffer is NULL, then ASSERT().\r
+ If Buffer is not aligned on a 16-bit boundary, then ASSERT().\r
+ If Length is not aligned on a 16-bit boundary, then ASSERT().\r
+ If Length is greater than (MAX_ADDRESS - Buffer + 1), then ASSERT().\r
+\r
+ @param Buffer Pointer to the buffer to carry out the sum operation.\r
+ @param Length The size, in bytes, of Buffer.\r
+\r
+ @return Sum The sum of Buffer with carry bits dropped during additions.\r
+\r
+**/\r
+UINT16\r
+EFIAPI\r
+CalculateSum16 (\r
+ IN CONST UINT16 *Buffer,\r
+ IN UINTN Length\r
+ );\r
+\r
+\r
+/**\r
+ Returns the two's complement checksum of all elements in a buffer of\r
+ 16-bit values.\r
+\r
+ This function first calculates the sum of the 16-bit values in the buffer\r
+ specified by Buffer and Length. The carry bits in the result of addition\r
+ are dropped. Then, the two's complement of the sum is returned. If Length\r
+ is 0, then 0 is returned.\r
+\r
+ If Buffer is NULL, then ASSERT().\r
+ If Buffer is not aligned on a 16-bit boundary, then ASSERT().\r
+ If Length is not aligned on a 16-bit boundary, then ASSERT().\r
+ If Length is greater than (MAX_ADDRESS - Buffer + 1), then ASSERT().\r
+\r
+ @param Buffer Pointer to the buffer to carry out the checksum operation.\r
+ @param Length The size, in bytes, of Buffer.\r
+\r
+ @return Checksum The 2's complement checksum of Buffer.\r
+\r
+**/\r
+UINT16\r
+EFIAPI\r
+CalculateCheckSum16 (\r
+ IN CONST UINT16 *Buffer,\r
+ IN UINTN Length\r
+ );\r
+\r
+\r
+/**\r
+ Returns the sum of all elements in a buffer of 32-bit values. During\r
+ calculation, the carry bits are dropped.\r
+\r
+ This function calculates the sum of the 32-bit values in the buffer\r
+ specified by Buffer and Length. The carry bits in result of addition are dropped.\r
+ The 32-bit result is returned. If Length is 0, then 0 is returned.\r
+\r
+ If Buffer is NULL, then ASSERT().\r
+ If Buffer is not aligned on a 32-bit boundary, then ASSERT().\r
+ If Length is not aligned on a 32-bit boundary, then ASSERT().\r
+ If Length is greater than (MAX_ADDRESS - Buffer + 1), then ASSERT().\r
+\r
+ @param Buffer Pointer to the buffer to carry out the sum operation.\r
+ @param Length The size, in bytes, of Buffer.\r
+\r
+ @return Sum The sum of Buffer with carry bits dropped during additions.\r
+\r
+**/\r
+UINT32\r
+EFIAPI\r
+CalculateSum32 (\r
+ IN CONST UINT32 *Buffer,\r
+ IN UINTN Length\r
+ );\r
+\r
+\r
+/**\r
+ Returns the two's complement checksum of all elements in a buffer of\r
+ 32-bit values.\r
+\r
+ This function first calculates the sum of the 32-bit values in the buffer\r
+ specified by Buffer and Length. The carry bits in the result of addition\r
+ are dropped. Then, the two's complement of the sum is returned. If Length\r
+ is 0, then 0 is returned.\r
+\r
+ If Buffer is NULL, then ASSERT().\r
+ If Buffer is not aligned on a 32-bit boundary, then ASSERT().\r
+ If Length is not aligned on a 32-bit boundary, then ASSERT().\r
+ If Length is greater than (MAX_ADDRESS - Buffer + 1), then ASSERT().\r
+\r
+ @param Buffer Pointer to the buffer to carry out the checksum operation.\r
+ @param Length The size, in bytes, of Buffer.\r
+\r
+ @return Checksum The 2's complement checksum of Buffer.\r
+\r
+**/\r
+UINT32\r
+EFIAPI\r
+CalculateCheckSum32 (\r
+ IN CONST UINT32 *Buffer,\r
+ IN UINTN Length\r
+ );\r
+\r
+\r
+/**\r
+ Returns the sum of all elements in a buffer of 64-bit values. During\r
+ calculation, the carry bits are dropped.\r
+\r
+ This function calculates the sum of the 64-bit values in the buffer\r
+ specified by Buffer and Length. The carry bits in result of addition are dropped.\r
+ The 64-bit result is returned. If Length is 0, then 0 is returned.\r
+\r
+ If Buffer is NULL, then ASSERT().\r
+ If Buffer is not aligned on a 64-bit boundary, then ASSERT().\r
+ If Length is not aligned on a 64-bit boundary, then ASSERT().\r
+ If Length is greater than (MAX_ADDRESS - Buffer + 1), then ASSERT().\r
+\r
+ @param Buffer Pointer to the buffer to carry out the sum operation.\r
+ @param Length The size, in bytes, of Buffer.\r
+\r
+ @return Sum The sum of Buffer with carry bits dropped during additions.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+CalculateSum64 (\r
+ IN CONST UINT64 *Buffer,\r
+ IN UINTN Length\r
+ );\r
+\r
+\r
+/**\r
+ Returns the two's complement checksum of all elements in a buffer of\r
+ 64-bit values.\r
+\r
+ This function first calculates the sum of the 64-bit values in the buffer\r
+ specified by Buffer and Length. The carry bits in the result of addition\r
+ are dropped. Then, the two's complement of the sum is returned. If Length\r
+ is 0, then 0 is returned.\r
+\r
+ If Buffer is NULL, then ASSERT().\r
+ If Buffer is not aligned on a 64-bit boundary, then ASSERT().\r
+ If Length is not aligned on a 64-bit boundary, then ASSERT().\r
+ If Length is greater than (MAX_ADDRESS - Buffer + 1), then ASSERT().\r
+\r
+ @param Buffer Pointer to the buffer to carry out the checksum operation.\r
+ @param Length The size, in bytes, of Buffer.\r
+\r
+ @return Checksum The 2's complement checksum of Buffer.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+CalculateCheckSum64 (\r
+ IN CONST UINT64 *Buffer,\r
+ IN UINTN Length\r
+ );\r
+\r
+\r
+///\r
+/// Base Library CPU Functions\r
+///\r
+typedef\r
+VOID\r
+(EFIAPI *SWITCH_STACK_ENTRY_POINT)(\r
+ IN VOID *Context1, OPTIONAL\r
+ IN VOID *Context2 OPTIONAL\r
+ );\r
+\r
+\r
+/**\r
+ Used to serialize load and store operations.\r
+\r
+ All loads and stores that proceed calls to this function are guaranteed to be\r
+ globally visible when this function returns.\r
+\r
+**/\r
+VOID\r
+EFIAPI\r
MemoryFence (\r
VOID\r
);\r
\r
+\r
/**\r
Saves the current CPU context that can be restored with a call to LongJump()\r
and returns 0.\r
calls to LongJump() cause a non-zero value to be returned by SetJump().\r
\r
If JumpBuffer is NULL, then ASSERT().\r
+ For IPF CPUs, if JumpBuffer is not aligned on a 16-byte boundary, then ASSERT().\r
\r
@param JumpBuffer A pointer to CPU context buffer.\r
\r
OUT BASE_LIBRARY_JUMP_BUFFER *JumpBuffer\r
);\r
\r
+\r
/**\r
Restores the CPU context that was saved with SetJump().\r
\r
the state of JumpBuffer.\r
\r
If JumpBuffer is NULL, then ASSERT().\r
+ For IPF CPUs, if JumpBuffer is not aligned on a 16-byte boundary, then ASSERT().\r
If Value is 0, then ASSERT().\r
\r
- @param JumpBuffer A pointer to CPU context buffer.\r
- @param Value The value to return when the SetJump() context is\r
- restored and must be non-zero.\r
+ @param JumpBuffer A pointer to CPU context buffer.\r
+ @param Value The value to return when the SetJump() context is\r
+ restored and must be non-zero.\r
+\r
+**/\r
+VOID\r
+EFIAPI\r
+LongJump (\r
+ IN BASE_LIBRARY_JUMP_BUFFER *JumpBuffer,\r
+ IN UINTN Value\r
+ );\r
+\r
+\r
+/**\r
+ Enables CPU interrupts.\r
+\r
+**/\r
+VOID\r
+EFIAPI\r
+EnableInterrupts (\r
+ VOID\r
+ );\r
+\r
+\r
+/**\r
+ Disables CPU interrupts.\r
+\r
+**/\r
+VOID\r
+EFIAPI\r
+DisableInterrupts (\r
+ VOID\r
+ );\r
+\r
+\r
+/**\r
+ Disables CPU interrupts and returns the interrupt state prior to the disable\r
+ operation.\r
+\r
+ @retval TRUE CPU interrupts were enabled on entry to this call.\r
+ @retval FALSE CPU interrupts were disabled on entry to this call.\r
+\r
+**/\r
+BOOLEAN\r
+EFIAPI\r
+SaveAndDisableInterrupts (\r
+ VOID\r
+ );\r
+\r
+\r
+/**\r
+ Enables CPU interrupts for the smallest window required to capture any\r
+ pending interrupts.\r
+\r
+**/\r
+VOID\r
+EFIAPI\r
+EnableDisableInterrupts (\r
+ VOID\r
+ );\r
+\r
+\r
+/**\r
+ Retrieves the current CPU interrupt state.\r
+\r
+ Returns TRUE is interrupts are currently enabled. Otherwise\r
+ returns FALSE.\r
+\r
+ @retval TRUE CPU interrupts are enabled.\r
+ @retval FALSE CPU interrupts are disabled.\r
+\r
+**/\r
+BOOLEAN\r
+EFIAPI\r
+GetInterruptState (\r
+ VOID\r
+ );\r
+\r
+\r
+/**\r
+ Set the current CPU interrupt state.\r
+\r
+ Sets the current CPU interrupt state to the state specified by\r
+ InterruptState. If InterruptState is TRUE, then interrupts are enabled. If\r
+ InterruptState is FALSE, then interrupts are disabled. InterruptState is\r
+ returned.\r
+\r
+ @param InterruptState TRUE if interrupts should enabled. FALSE if\r
+ interrupts should be disabled.\r
+\r
+ @return InterruptState\r
+\r
+**/\r
+BOOLEAN\r
+EFIAPI\r
+SetInterruptState (\r
+ IN BOOLEAN InterruptState\r
+ );\r
+\r
+\r
+/**\r
+ Requests CPU to pause for a short period of time.\r
+\r
+ Requests CPU to pause for a short period of time. Typically used in MP\r
+ systems to prevent memory starvation while waiting for a spin lock.\r
+\r
+**/\r
+VOID\r
+EFIAPI\r
+CpuPause (\r
+ VOID\r
+ );\r
+\r
+\r
+/**\r
+ Transfers control to a function starting with a new stack.\r
+\r
+ Transfers control to the function specified by EntryPoint using the\r
+ new stack specified by NewStack and passing in the parameters specified\r
+ by Context1 and Context2. Context1 and Context2 are optional and may\r
+ be NULL. The function EntryPoint must never return. This function\r
+ supports a variable number of arguments following the NewStack parameter.\r
+ These additional arguments are ignored on IA-32, x64, and EBC.\r
+ IPF CPUs expect one additional parameter of type VOID * that specifies\r
+ the new backing store pointer.\r
+\r
+ If EntryPoint is NULL, then ASSERT().\r
+ If NewStack is NULL, then ASSERT().\r
+\r
+ @param EntryPoint A pointer to function to call with the new stack.\r
+ @param Context1 A pointer to the context to pass into the EntryPoint\r
+ function.\r
+ @param Context2 A pointer to the context to pass into the EntryPoint\r
+ function.\r
+ @param NewStack A pointer to the new stack to use for the EntryPoint\r
+ function.\r
+ @param ... Extended parameters.\r
+\r
+\r
+**/\r
+VOID\r
+EFIAPI\r
+SwitchStack (\r
+ IN SWITCH_STACK_ENTRY_POINT EntryPoint,\r
+ IN VOID *Context1, OPTIONAL\r
+ IN VOID *Context2, OPTIONAL\r
+ IN VOID *NewStack,\r
+ ...\r
+ );\r
+\r
+\r
+/**\r
+ Generates a breakpoint on the CPU.\r
+\r
+ Generates a breakpoint on the CPU. The breakpoint must be implemented such\r
+ that code can resume normal execution after the breakpoint.\r
+\r
+**/\r
+VOID\r
+EFIAPI\r
+CpuBreakpoint (\r
+ VOID\r
+ );\r
+\r
+\r
+/**\r
+ Executes an infinite loop.\r
+\r
+ Forces the CPU to execute an infinite loop. A debugger may be used to skip\r
+ past the loop and the code that follows the loop must execute properly. This\r
+ implies that the infinite loop must not cause the code that follow it to be\r
+ optimized away.\r
+\r
+**/\r
+VOID\r
+EFIAPI\r
+CpuDeadLoop (\r
+ VOID\r
+ );\r
+\r
+\r
+#if defined (MDE_CPU_IPF)\r
+\r
+/**\r
+ Flush a range of cache lines in the cache coherency domain of the calling\r
+ CPU.\r
+\r
+ Invalidates the cache lines specified by Address and Length. If Address is\r
+ not aligned on a cache line boundary, then entire cache line containing\r
+ Address is invalidated. If Address + Length is not aligned on a cache line\r
+ boundary, then the entire instruction cache line containing Address + Length\r
+ -1 is invalidated. This function may choose to invalidate the entire\r
+ instruction cache if that is more efficient than invalidating the specified\r
+ range. If Length is 0, the no instruction cache lines are invalidated.\r
+ Address is returned.\r
+\r
+ If Length is greater than (MAX_ADDRESS - Address + 1), then ASSERT().\r
+\r
+ @param Address The base address of the instruction lines to invalidate. If\r
+ the CPU is in a physical addressing mode, then Address is a\r
+ physical address. If the CPU is in a virtual addressing mode,\r
+ then Address is a virtual address.\r
+\r
+ @param Length The number of bytes to invalidate from the instruction cache.\r
+\r
+ @return Address\r
+\r
+**/\r
+VOID *\r
+EFIAPI\r
+IpfFlushCacheRange (\r
+ IN VOID *Address,\r
+ IN UINTN Length\r
+ );\r
+\r
+\r
+/**\r
+ Executes a FC instruction\r
+ Executes a FC instruction on the cache line specified by Address.\r
+ The cache line size affected is at least 32-bytes (aligned on a 32-byte boundary).\r
+ An implementation may flush a larger region. This function is only available on IPF.\r
+\r
+ @param Address The Address of cache line to be flushed.\r
+\r
+ @return The address of FC instruction executed.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+AsmFc (\r
+ IN UINT64 Address\r
+ );\r
+\r
+\r
+/**\r
+ Executes a FC.I instruction.\r
+ Executes a FC.I instruction on the cache line specified by Address.\r
+ The cache line size affected is at least 32-bytes (aligned on a 32-byte boundary).\r
+ An implementation may flush a larger region. This function is only available on IPF.\r
+\r
+ @param Address The Address of cache line to be flushed.\r
+\r
+ @return The address of FC.I instruction executed.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+AsmFci (\r
+ IN UINT64 Address\r
+ );\r
+\r
+\r
+/**\r
+ Reads the current value of a Processor Identifier Register (CPUID).\r
+ The Index of largest implemented CPUID (One less than the number of implemented CPUID\r
+ registers) is determined by CPUID [3] bits {7:0}.\r
+ No parameter checking is performed on Index. If the Index value is beyond the\r
+ implemented CPUID register range, a Reserved Register/Field fault may occur. The caller\r
+ must either guarantee that Index is valid, or the caller must set up fault handlers to\r
+ catch the faults. This function is only available on IPF.\r
+\r
+ @param Index The 8-bit Processor Identifier Register index to read.\r
+\r
+ @return The current value of Processor Identifier Register specified by Index.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+AsmReadCpuid (\r
+ IN UINT8 Index\r
+ );\r
+\r
+\r
+/**\r
+ Reads the current value of 64-bit Processor Status Register (PSR).\r
+ This function is only available on IPF.\r
+\r
+ @return The current value of PSR.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+AsmReadPsr (\r
+ VOID\r
+ );\r
+\r
+\r
+/**\r
+ Writes the current value of 64-bit Processor Status Register (PSR).\r
+ No parameter checking is performed on Value. All bits of Value corresponding to\r
+ reserved fields of PSR must be 0 or a Reserved Register/Field fault may occur. The caller must either guarantee that Value is valid, or the caller must set up fault handlers to catch the faults.\r
+ This function is only available on IPF.\r
+\r
+ @param Value The 64-bit value to write to PSR.\r
+\r
+ @return The 64-bit value written to the PSR.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+AsmWritePsr (\r
+ IN UINT64 Value\r
+ );\r
+\r
+\r
+/**\r
+ Reads the current value of 64-bit Kernel Register #0 (KR0).\r
+ This function is only available on IPF.\r
+\r
+ @return The current value of KR0.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+AsmReadKr0 (\r
+ VOID\r
+ );\r
+\r
+\r
+/**\r
+ Reads the current value of 64-bit Kernel Register #1 (KR1).\r
+ This function is only available on IPF.\r
+\r
+ @return The current value of KR1.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+AsmReadKr1 (\r
+ VOID\r
+ );\r
+\r
+\r
+/**\r
+ Reads the current value of 64-bit Kernel Register #2 (KR2).\r
+ This function is only available on IPF.\r
+\r
+ @return The current value of KR2.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+AsmReadKr2 (\r
+ VOID\r
+ );\r
+\r
+\r
+/**\r
+ Reads the current value of 64-bit Kernel Register #3 (KR3).\r
+ This function is only available on IPF.\r
+\r
+ @return The current value of KR3.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+AsmReadKr3 (\r
+ VOID\r
+ );\r
+\r
+\r
+/**\r
+ Reads the current value of 64-bit Kernel Register #4 (KR4).\r
+ This function is only available on IPF.\r
+\r
+ @return The current value of KR4.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+AsmReadKr4 (\r
+ VOID\r
+ );\r
+\r
+\r
+/**\r
+ Reads the current value of 64-bit Kernel Register #5 (KR5).\r
+ This function is only available on IPF.\r
+\r
+ @return The current value of KR5.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+AsmReadKr5 (\r
+ VOID\r
+ );\r
+\r
+\r
+/**\r
+ Reads the current value of 64-bit Kernel Register #6 (KR6).\r
+ This function is only available on IPF.\r
+\r
+ @return The current value of KR6.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+AsmReadKr6 (\r
+ VOID\r
+ );\r
+\r
+\r
+/**\r
+ Reads the current value of 64-bit Kernel Register #7 (KR7).\r
+ This function is only available on IPF.\r
+\r
+ @return The current value of KR7.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+AsmReadKr7 (\r
+ VOID\r
+ );\r
+\r
+\r
+/**\r
+ Write the current value of 64-bit Kernel Register #0 (KR0).\r
+ This function is only available on IPF.\r
+\r
+ @param Value The 64-bit value to write to KR0.\r
+\r
+ @return The 64-bit value written to the KR0.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+AsmWriteKr0 (\r
+ IN UINT64 Value\r
+ );\r
+\r
+\r
+/**\r
+ Write the current value of 64-bit Kernel Register #1 (KR1).\r
+ This function is only available on IPF.\r
+\r
+ @param Value The 64-bit value to write to KR1.\r
+\r
+ @return The 64-bit value written to the KR1.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+AsmWriteKr1 (\r
+ IN UINT64 Value\r
+ );\r
+\r
+\r
+/**\r
+ Write the current value of 64-bit Kernel Register #2 (KR2).\r
+ This function is only available on IPF.\r
+\r
+ @param Value The 64-bit value to write to KR2.\r
+\r
+ @return The 64-bit value written to the KR2.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+AsmWriteKr2 (\r
+ IN UINT64 Value\r
+ );\r
+\r
+\r
+/**\r
+ Write the current value of 64-bit Kernel Register #3 (KR3).\r
+ This function is only available on IPF.\r
+\r
+ @param Value The 64-bit value to write to KR3.\r
+\r
+ @return The 64-bit value written to the KR3.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+AsmWriteKr3 (\r
+ IN UINT64 Value\r
+ );\r
+\r
+\r
+/**\r
+ Write the current value of 64-bit Kernel Register #4 (KR4).\r
+ This function is only available on IPF.\r
+\r
+ @param Value The 64-bit value to write to KR4.\r
+\r
+ @return The 64-bit value written to the KR4.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+AsmWriteKr4 (\r
+ IN UINT64 Value\r
+ );\r
+\r
+\r
+/**\r
+ Write the current value of 64-bit Kernel Register #5 (KR5).\r
+ This function is only available on IPF.\r
+\r
+ @param Value The 64-bit value to write to KR5.\r
+\r
+ @return The 64-bit value written to the KR5.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+AsmWriteKr5 (\r
+ IN UINT64 Value\r
+ );\r
+\r
+\r
+/**\r
+ Write the current value of 64-bit Kernel Register #6 (KR6).\r
+ This function is only available on IPF.\r
+\r
+ @param Value The 64-bit value to write to KR6.\r
+\r
+ @return The 64-bit value written to the KR6.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+AsmWriteKr6 (\r
+ IN UINT64 Value\r
+ );\r
+\r
+\r
+/**\r
+ Write the current value of 64-bit Kernel Register #7 (KR7).\r
+ This function is only available on IPF.\r
+\r
+ @param Value The 64-bit value to write to KR7.\r
+\r
+ @return The 64-bit value written to the KR7.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+AsmWriteKr7 (\r
+ IN UINT64 Value\r
+ );\r
+\r
+\r
+/**\r
+ Reads the current value of Interval Timer Counter Register (ITC).\r
+ This function is only available on IPF.\r
+\r
+ @return The current value of ITC.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+AsmReadItc (\r
+ VOID\r
+ );\r
+\r
+\r
+/**\r
+ Reads the current value of Interval Timer Vector Register (ITV).\r
+ This function is only available on IPF.\r
+\r
+ @return The current value of ITV.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+AsmReadItv (\r
+ VOID\r
+ );\r
+\r
+\r
+/**\r
+ Reads the current value of Interval Timer Match Register (ITM).\r
+ This function is only available on IPF.\r
+\r
+ @return The current value of ITM.\r
+**/\r
+UINT64\r
+EFIAPI\r
+AsmReadItm (\r
+ VOID\r
+ );\r
+\r
+\r
+/**\r
+ Writes the current value of 64-bit Interval Timer Counter Register (ITC).\r
+ This function is only available on IPF.\r
+\r
+ @param Value The 64-bit value to write to ITC.\r
+\r
+ @return The 64-bit value written to the ITC.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+AsmWriteItc (\r
+ IN UINT64 Value\r
+ );\r
+\r
+\r
+/**\r
+ Writes the current value of 64-bit Interval Timer Match Register (ITM).\r
+ This function is only available on IPF.\r
+\r
+ @param Value The 64-bit value to write to ITM.\r
+\r
+ @return The 64-bit value written to the ITM.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+AsmWriteItm (\r
+ IN UINT64 Value\r
+ );\r
+\r
+\r
+/**\r
+ Writes the current value of 64-bit Interval Timer Vector Register (ITV).\r
+ No parameter checking is performed on Value. All bits of Value corresponding to\r
+ reserved fields of ITV must be 0 or a Reserved Register/Field fault may occur.\r
+ The caller must either guarantee that Value is valid, or the caller must set up\r
+ fault handlers to catch the faults.\r
+ This function is only available on IPF.\r
+\r
+ @param Value The 64-bit value to write to ITV.\r
+\r
+ @return The 64-bit value written to the ITV.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+AsmWriteItv (\r
+ IN UINT64 Value\r
+ );\r
+\r
+\r
+/**\r
+ Reads the current value of Default Control Register (DCR).\r
+ This function is only available on IPF.\r
+\r
+ @return The current value of DCR.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+AsmReadDcr (\r
+ VOID\r
+ );\r
+\r
+\r
+/**\r
+ Reads the current value of Interruption Vector Address Register (IVA).\r
+ This function is only available on IPF.\r
+\r
+ @return The current value of IVA.\r
+**/\r
+UINT64\r
+EFIAPI\r
+AsmReadIva (\r
+ VOID\r
+ );\r
+\r
+\r
+/**\r
+ Reads the current value of Page Table Address Register (PTA).\r
+ This function is only available on IPF.\r
+\r
+ @return The current value of PTA.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+AsmReadPta (\r
+ VOID\r
+ );\r
+\r
+\r
+/**\r
+ Writes the current value of 64-bit Default Control Register (DCR).\r
+ No parameter checking is performed on Value. All bits of Value corresponding to\r
+ reserved fields of DCR must be 0 or a Reserved Register/Field fault may occur.\r
+ The caller must either guarantee that Value is valid, or the caller must set up\r
+ fault handlers to catch the faults.\r
+ This function is only available on IPF.\r
+\r
+ @param Value The 64-bit value to write to DCR.\r
+\r
+ @return The 64-bit value written to the DCR.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+AsmWriteDcr (\r
+ IN UINT64 Value\r
+ );\r
+\r
+\r
+/**\r
+ Writes the current value of 64-bit Interruption Vector Address Register (IVA).\r
+ The size of vector table is 32 K bytes and is 32 K bytes aligned\r
+ the low 15 bits of Value is ignored when written.\r
+ This function is only available on IPF.\r
+\r
+ @param Value The 64-bit value to write to IVA.\r
+\r
+ @return The 64-bit value written to the IVA.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+AsmWriteIva (\r
+ IN UINT64 Value\r
+ );\r
+\r
+\r
+/**\r
+ Writes the current value of 64-bit Page Table Address Register (PTA).\r
+ No parameter checking is performed on Value. All bits of Value corresponding to\r
+ reserved fields of DCR must be 0 or a Reserved Register/Field fault may occur.\r
+ The caller must either guarantee that Value is valid, or the caller must set up\r
+ fault handlers to catch the faults.\r
+ This function is only available on IPF.\r
+\r
+ @param Value The 64-bit value to write to PTA.\r
+\r
+ @return The 64-bit value written to the PTA.\r
+**/\r
+UINT64\r
+EFIAPI\r
+AsmWritePta (\r
+ IN UINT64 Value\r
+ );\r
+\r
+\r
+/**\r
+ Reads the current value of Local Interrupt ID Register (LID).\r
+ This function is only available on IPF.\r
+\r
+ @return The current value of LID.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+AsmReadLid (\r
+ VOID\r
+ );\r
+\r
+\r
+/**\r
+ Reads the current value of External Interrupt Vector Register (IVR).\r
+ This function is only available on IPF.\r
+\r
+ @return The current value of IVR.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+AsmReadIvr (\r
+ VOID\r
+ );\r
+\r
+\r
+/**\r
+ Reads the current value of Task Priority Register (TPR).\r
+ This function is only available on IPF.\r
+\r
+ @return The current value of TPR.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+AsmReadTpr (\r
+ VOID\r
+ );\r
+\r
+\r
+/**\r
+ Reads the current value of External Interrupt Request Register #0 (IRR0).\r
+ This function is only available on IPF.\r
+\r
+ @return The current value of IRR0.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+AsmReadIrr0 (\r
+ VOID\r
+ );\r
+\r
+\r
+/**\r
+ Reads the current value of External Interrupt Request Register #1 (IRR1).\r
+ This function is only available on IPF.\r
+\r
+ @return The current value of IRR1.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+AsmReadIrr1 (\r
+ VOID\r
+ );\r
+\r
+\r
+/**\r
+ Reads the current value of External Interrupt Request Register #2 (IRR2).\r
+ This function is only available on IPF.\r
+\r
+ @return The current value of IRR2.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+AsmReadIrr2 (\r
+ VOID\r
+ );\r
+\r
+\r
+/**\r
+ Reads the current value of External Interrupt Request Register #3 (IRR3).\r
+ This function is only available on IPF.\r
+\r
+ @return The current value of IRR3.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+AsmReadIrr3 (\r
+ VOID\r
+ );\r
+\r
+\r
+/**\r
+ Reads the current value of Performance Monitor Vector Register (PMV).\r
+ This function is only available on IPF.\r
+\r
+ @return The current value of PMV.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+AsmReadPmv (\r
+ VOID\r
+ );\r
+\r
+\r
+/**\r
+ Reads the current value of Corrected Machine Check Vector Register (CMCV).\r
+ This function is only available on IPF.\r
+\r
+ @return The current value of CMCV.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+AsmReadCmcv (\r
+ VOID\r
+ );\r
+\r
+\r
+/**\r
+ Reads the current value of Local Redirection Register #0 (LRR0).\r
+ This function is only available on IPF.\r
+\r
+ @return The current value of LRR0.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+AsmReadLrr0 (\r
+ VOID\r
+ );\r
+\r
+\r
+/**\r
+ Reads the current value of Local Redirection Register #1 (LRR1).\r
+ This function is only available on IPF.\r
+\r
+ @return The current value of LRR1.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+AsmReadLrr1 (\r
+ VOID\r
+ );\r
+\r
+\r
+/**\r
+ Writes the current value of 64-bit Page Local Interrupt ID Register (LID).\r
+ No parameter checking is performed on Value. All bits of Value corresponding to\r
+ reserved fields of LID must be 0 or a Reserved Register/Field fault may occur.\r
+ The caller must either guarantee that Value is valid, or the caller must set up\r
+ fault handlers to catch the faults.\r
+ This function is only available on IPF.\r
+\r
+ @param Value The 64-bit value to write to LID.\r
+\r
+ @return The 64-bit value written to the LID.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+AsmWriteLid (\r
+ IN UINT64 Value\r
+ );\r
+\r
+\r
+/**\r
+ Writes the current value of 64-bit Task Priority Register (TPR).\r
+ No parameter checking is performed on Value. All bits of Value corresponding to\r
+ reserved fields of TPR must be 0 or a Reserved Register/Field fault may occur.\r
+ The caller must either guarantee that Value is valid, or the caller must set up\r
+ fault handlers to catch the faults.\r
+ This function is only available on IPF.\r
+\r
+ @param Value The 64-bit value to write to TPR.\r
+\r
+ @return The 64-bit value written to the TPR.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+AsmWriteTpr (\r
+ IN UINT64 Value\r
+ );\r
+\r
+\r
+/**\r
+ Performs a write operation on End OF External Interrupt Register (EOI).\r
+ Writes a value of 0 to the EOI Register. This function is only available on IPF.\r
+\r
+**/\r
+VOID\r
+EFIAPI\r
+AsmWriteEoi (\r
+ VOID\r
+ );\r
+\r
+\r
+/**\r
+ Writes the current value of 64-bit Performance Monitor Vector Register (PMV).\r
+ No parameter checking is performed on Value. All bits of Value corresponding\r
+ to reserved fields of PMV must be 0 or a Reserved Register/Field fault may occur.\r
+ The caller must either guarantee that Value is valid, or the caller must set up\r
+ fault handlers to catch the faults.\r
+ This function is only available on IPF.\r
+\r
+ @param Value The 64-bit value to write to PMV.\r
+\r
+ @return The 64-bit value written to the PMV.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+AsmWritePmv (\r
+ IN UINT64 Value\r
+ );\r
+\r
+\r
+/**\r
+ Writes the current value of 64-bit Corrected Machine Check Vector Register (CMCV).\r
+ No parameter checking is performed on Value. All bits of Value corresponding\r
+ to reserved fields of CMCV must be 0 or a Reserved Register/Field fault may occur.\r
+ The caller must either guarantee that Value is valid, or the caller must set up\r
+ fault handlers to catch the faults.\r
+ This function is only available on IPF.\r
+\r
+ @param Value The 64-bit value to write to CMCV.\r
+\r
+ @return The 64-bit value written to the CMCV.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+AsmWriteCmcv (\r
+ IN UINT64 Value\r
+ );\r
+\r
+\r
+/**\r
+ Writes the current value of 64-bit Local Redirection Register #0 (LRR0).\r
+ No parameter checking is performed on Value. All bits of Value corresponding\r
+ to reserved fields of LRR0 must be 0 or a Reserved Register/Field fault may occur.\r
+ The caller must either guarantee that Value is valid, or the caller must set up\r
+ fault handlers to catch the faults.\r
+ This function is only available on IPF.\r
+\r
+ @param Value The 64-bit value to write to LRR0.\r
+\r
+ @return The 64-bit value written to the LRR0.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+AsmWriteLrr0 (\r
+ IN UINT64 Value\r
+ );\r
+\r
+\r
+/**\r
+ Writes the current value of 64-bit Local Redirection Register #1 (LRR1).\r
+ No parameter checking is performed on Value. All bits of Value corresponding\r
+ to reserved fields of LRR1 must be 0 or a Reserved Register/Field fault may occur.\r
+ The caller must either guarantee that Value is valid, or the caller must\r
+ set up fault handlers to catch the faults.\r
+ This function is only available on IPF.\r
+\r
+ @param Value The 64-bit value to write to LRR1.\r
+\r
+ @return The 64-bit value written to the LRR1.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+AsmWriteLrr1 (\r
+ IN UINT64 Value\r
+ );\r
+\r
+\r
+/**\r
+ Reads the current value of Instruction Breakpoint Register (IBR).\r
+ \r
+ The Instruction Breakpoint Registers are used in pairs. The even numbered\r
+ registers contain breakpoint addresses, and the odd numbered registers contain\r
+ breakpoint mask conditions. At least 4 instruction registers pairs are implemented\r
+ on all processor models. Implemented registers are contiguous starting with\r
+ register 0. No parameter checking is performed on Index, and if the Index value\r
+ is beyond the implemented IBR register range, a Reserved Register/Field fault may\r
+ occur. The caller must either guarantee that Index is valid, or the caller must\r
+ set up fault handlers to catch the faults.\r
+ This function is only available on IPF.\r
+\r
+ @param Index The 8-bit Instruction Breakpoint Register index to read.\r
+\r
+ @return The current value of Instruction Breakpoint Register specified by Index.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+AsmReadIbr (\r
+ IN UINT8 Index\r
+ );\r
+\r
+\r
+/**\r
+ Reads the current value of Data Breakpoint Register (DBR).\r
+\r
+ The Data Breakpoint Registers are used in pairs. The even numbered registers\r
+ contain breakpoint addresses, and odd numbered registers contain breakpoint\r
+ mask conditions. At least 4 data registers pairs are implemented on all processor\r
+ models. Implemented registers are contiguous starting with register 0.\r
+ No parameter checking is performed on Index. If the Index value is beyond\r
+ the implemented DBR register range, a Reserved Register/Field fault may occur.\r
+ The caller must either guarantee that Index is valid, or the caller must set up\r
+ fault handlers to catch the faults.\r
+ This function is only available on IPF.\r
+\r
+ @param Index The 8-bit Data Breakpoint Register index to read.\r
+\r
+ @return The current value of Data Breakpoint Register specified by Index.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+AsmReadDbr (\r
+ IN UINT8 Index\r
+ );\r
+\r
+\r
+/**\r
+ Reads the current value of Performance Monitor Configuration Register (PMC).\r
+\r
+ All processor implementations provide at least 4 performance counters\r
+ (PMC/PMD [4]...PMC/PMD [7] pairs), and 4 performance monitor counter overflow\r
+ status registers (PMC [0]... PMC [3]). Processor implementations may provide\r
+ additional implementation-dependent PMC and PMD to increase the number of\r
+ 'generic' performance counters (PMC/PMD pairs). The remainder of PMC and PMD\r
+ register set is implementation dependent. No parameter checking is performed\r
+ on Index. If the Index value is beyond the implemented PMC register range,\r
+ zero value will be returned.\r
+ This function is only available on IPF.\r
+\r
+ @param Index The 8-bit Performance Monitor Configuration Register index to read.\r
+\r
+ @return The current value of Performance Monitor Configuration Register\r
+ specified by Index.\r
+\r
+**/\r
+UINT64\r
+EFIAPI\r
+AsmReadPmc (\r
+ IN UINT8 Index\r
+ );\r
+\r
+\r
+/**\r
+ Reads the current value of Performance Monitor Data Register (PMD).\r
+\r
+ All processor implementations provide at least 4 performance counters\r
+ (PMC/PMD [4]...PMC/PMD [7] pairs), and 4 performance monitor counter\r
+ overflow status registers (PMC [0]... PMC [3]). Processor implementations may\r
+ provide additional implementation-dependent PMC and PMD to increase the number\r
+ of 'generic' performance counters (PMC/PMD pairs). The remainder of PMC and PMD\r
+ register set is implementation dependent. No parameter checking is performed\r
+ on Index. If the Index value is beyond the implemented PMD register range,\r
+ zero value will be returned.\r
+ This function is only available on IPF.\r
+\r
+ @param Index The 8-bit Performance Monitor Data Register index to read.\r
+\r
+ @return The current value of Performance Monitor Data Register specified by Index.\r
\r
**/\r
-VOID\r
+UINT64\r
EFIAPI\r
-LongJump (\r
- IN BASE_LIBRARY_JUMP_BUFFER *JumpBuffer,\r
- IN UINTN Value\r
+AsmReadPmd (\r
+ IN UINT8 Index\r
);\r
\r
+\r
/**\r
- Enables CPU interrupts.\r
+ Writes the current value of 64-bit Instruction Breakpoint Register (IBR).\r
\r
- Enables CPU interrupts.\r
+ Writes current value of Instruction Breakpoint Register specified by Index.\r
+ The Instruction Breakpoint Registers are used in pairs. The even numbered\r
+ registers contain breakpoint addresses, and odd numbered registers contain\r
+ breakpoint mask conditions. At least 4 instruction registers pairs are implemented\r
+ on all processor models. Implemented registers are contiguous starting with\r
+ register 0. No parameter checking is performed on Index. If the Index value\r
+ is beyond the implemented IBR register range, a Reserved Register/Field fault may\r
+ occur. The caller must either guarantee that Index is valid, or the caller must\r
+ set up fault handlers to catch the faults.\r
+ This function is only available on IPF.\r
+\r
+ @param Index The 8-bit Instruction Breakpoint Register index to write.\r
+ @param Value The 64-bit value to write to IBR.\r
+\r
+ @return The 64-bit value written to the IBR.\r
\r
**/\r
-VOID\r
+UINT64\r
EFIAPI\r
-EnableInterrupts (\r
- VOID\r
+AsmWriteIbr (\r
+ IN UINT8 Index,\r
+ IN UINT64 Value\r
);\r
\r
+\r
/**\r
- Disables CPU interrupts.\r
+ Writes the current value of 64-bit Data Breakpoint Register (DBR).\r
\r
- Disables CPU interrupts.\r
+ Writes current value of Data Breakpoint Register specified by Index.\r
+ The Data Breakpoint Registers are used in pairs. The even numbered registers\r
+ contain breakpoint addresses, and odd numbered registers contain breakpoint\r
+ mask conditions. At least 4 data registers pairs are implemented on all processor\r
+ models. Implemented registers are contiguous starting with register 0. No parameter\r
+ checking is performed on Index. If the Index value is beyond the implemented\r
+ DBR register range, a Reserved Register/Field fault may occur. The caller must\r
+ either guarantee that Index is valid, or the caller must set up fault handlers to\r
+ catch the faults.\r
+ This function is only available on IPF.\r
+\r
+ @param Index The 8-bit Data Breakpoint Register index to write.\r
+ @param Value The 64-bit value to write to DBR.\r
+\r
+ @return The 64-bit value written to the DBR.\r
\r
**/\r
-VOID\r
+UINT64\r
EFIAPI\r
-DisableInterrupts (\r
- VOID\r
+AsmWriteDbr (\r
+ IN UINT8 Index,\r
+ IN UINT64 Value\r
);\r
\r
+\r
/**\r
- Disables CPU interrupts and returns the interrupt state prior to the disable\r
- operation.\r
+ Writes the current value of 64-bit Performance Monitor Configuration Register (PMC).\r
\r
- Disables CPU interrupts and returns the interrupt state prior to the disable\r
- operation.\r
+ Writes current value of Performance Monitor Configuration Register specified by Index.\r
+ All processor implementations provide at least 4 performance counters\r
+ (PMC/PMD [4]...PMC/PMD [7] pairs), and 4 performance monitor counter overflow status\r
+ registers (PMC [0]... PMC [3]). Processor implementations may provide additional\r
+ implementation-dependent PMC and PMD to increase the number of 'generic' performance\r
+ counters (PMC/PMD pairs). The remainder of PMC and PMD register set is implementation\r
+ dependent. No parameter checking is performed on Index. If the Index value is\r
+ beyond the implemented PMC register range, the write is ignored.\r
+ This function is only available on IPF.\r
\r
- @retval TRUE CPU interrupts were enabled on entry to this call.\r
- @retval FALSE CPU interrupts were disabled on entry to this call.\r
+ @param Index The 8-bit Performance Monitor Configuration Register index to write.\r
+ @param Value The 64-bit value to write to PMC.\r
+\r
+ @return The 64-bit value written to the PMC.\r
\r
**/\r
-BOOLEAN\r
+UINT64\r
EFIAPI\r
-SaveAndDisableInterrupts (\r
- VOID\r
+AsmWritePmc (\r
+ IN UINT8 Index,\r
+ IN UINT64 Value\r
);\r
\r
+\r
/**\r
- Enables CPU interrupts for the smallest window required to capture any\r
- pending interrupts.\r
+ Writes the current value of 64-bit Performance Monitor Data Register (PMD).\r
\r
- Enables CPU interrupts for the smallest window required to capture any\r
- pending interrupts.\r
+ Writes current value of Performance Monitor Data Register specified by Index.\r
+ All processor implementations provide at least 4 performance counters\r
+ (PMC/PMD [4]...PMC/PMD [7] pairs), and 4 performance monitor counter overflow\r
+ status registers (PMC [0]... PMC [3]). Processor implementations may provide\r
+ additional implementation-dependent PMC and PMD to increase the number of 'generic'\r
+ performance counters (PMC/PMD pairs). The remainder of PMC and PMD register set\r
+ is implementation dependent. No parameter checking is performed on Index. If the\r
+ Index value is beyond the implemented PMD register range, the write is ignored.\r
+ This function is only available on IPF.\r
+\r
+ @param Index The 8-bit Performance Monitor Data Register index to write.\r
+ @param Value The 64-bit value to write to PMD.\r
+\r
+ @return The 64-bit value written to the PMD.\r
\r
**/\r
-VOID\r
+UINT64\r
EFIAPI\r
-EnableDisableInterrupts (\r
- VOID\r
+AsmWritePmd (\r
+ IN UINT8 Index,\r
+ IN UINT64 Value\r
);\r
\r
+\r
/**\r
- Retrieves the current CPU interrupt state.\r
+ Reads the current value of 64-bit Global Pointer (GP).\r
\r
- Retrieves the current CPU interrupt state. Returns TRUE is interrupts are\r
- currently enabled. Otherwise returns FALSE.\r
+ Reads and returns the current value of GP.\r
+ This function is only available on IPF.\r
\r
- @retval TRUE CPU interrupts are enabled.\r
- @retval FALSE CPU interrupts are disabled.\r
+ @return The current value of GP.\r
\r
**/\r
-BOOLEAN\r
+UINT64\r
EFIAPI\r
-GetInterruptState (\r
+AsmReadGp (\r
VOID\r
);\r
\r
+\r
/**\r
- Set the current CPU interrupt state.\r
+ Write the current value of 64-bit Global Pointer (GP).\r
\r
- Sets the current CPU interrupt state to the state specified by\r
- InterruptState. If InterruptState is TRUE, then interrupts are enabled. If\r
- InterruptState is FALSE, then interrupts are disabled. InterruptState is\r
- returned.\r
+ Writes the current value of GP. The 64-bit value written to the GP is returned.\r
+ No parameter checking is performed on Value.\r
+ This function is only available on IPF.\r
\r
- @param InterruptState TRUE if interrupts should enabled. FALSE if\r
- interrupts should be disabled.\r
+ @param Value The 64-bit value to write to GP.\r
\r
- @return InterruptState\r
+ @return The 64-bit value written to the GP.\r
\r
**/\r
-BOOLEAN\r
+UINT64\r
EFIAPI\r
-SetInterruptState (\r
- IN BOOLEAN InterruptState\r
+AsmWriteGp (\r
+ IN UINT64 Value\r
);\r
\r
+\r
/**\r
- Places the CPU in a sleep state until an interrupt is received.\r
+ Reads the current value of 64-bit Stack Pointer (SP).\r
\r
- Places the CPU in a sleep state until an interrupt is received. If interrupts\r
- are disabled prior to calling this function, then the CPU will be placed in a\r
- sleep state indefinitely.\r
+ Reads and returns the current value of SP.\r
+ This function is only available on IPF.\r
+\r
+ @return The current value of SP.\r
\r
**/\r
-VOID\r
+UINT64\r
EFIAPI\r
-CpuSleep (\r
+AsmReadSp (\r
VOID\r
);\r
\r
+\r
/**\r
- Requests CPU to pause for a short period of time.\r
+ Determines if the CPU is currently executing in virtual, physical, or mixed mode.\r
\r
- Requests CPU to pause for a short period of time. Typically used in MP\r
- systems to prevent memory starvation while waiting for a spin lock.\r
+ Determines the current execution mode of the CPU.\r
+ If the CPU is in virtual mode(PSR.RT=1, PSR.DT=1, PSR.IT=1), then 1 is returned.\r
+ If the CPU is in physical mode(PSR.RT=0, PSR.DT=0, PSR.IT=0), then 0 is returned.\r
+ If the CPU is not in physical mode or virtual mode, then it is in mixed mode,\r
+ and -1 is returned.\r
+ This function is only available on IPF.\r
+\r
+ @return 1 The CPU is in virtual mode.\r
+ @return 0 The CPU is in physical mode.\r
+ @return -1 The CPU is in mixed mode.\r
\r
**/\r
-VOID\r
+INT64\r
EFIAPI\r
-CpuPause (\r
+AsmCpuVirtual (\r
VOID\r
);\r
\r
+\r
/**\r
- Flushes all the Translation Lookaside Buffers(TLB) entries in a CPU.\r
+ Makes a PAL procedure call.\r
+\r
+ This is a wrapper function to make a PAL procedure call. Based on the Index\r
+ value this API will make static or stacked PAL call. The following table\r
+ describes the usage of PAL Procedure Index Assignment. Architected procedures\r
+ may be designated as required or optional. If a PAL procedure is specified\r
+ as optional, a unique return code of 0xFFFFFFFFFFFFFFFF is returned in the\r
+ Status field of the PAL_CALL_RETURN structure.\r
+ This indicates that the procedure is not present in this PAL implementation.\r
+ It is the caller's responsibility to check for this return code after calling\r
+ any optional PAL procedure.\r
+ No parameter checking is performed on the 5 input parameters, but there are\r
+ some common rules that the caller should follow when making a PAL call. Any\r
+ address passed to PAL as buffers for return parameters must be 8-byte aligned.\r
+ Unaligned addresses may cause undefined results. For those parameters defined\r
+ as reserved or some fields defined as reserved must be zero filled or the invalid\r
+ argument return value may be returned or undefined result may occur during the\r
+ execution of the procedure. If the PalEntryPoint does not point to a valid\r
+ PAL entry point then the system behavior is undefined. This function is only\r
+ available on IPF.\r
+\r
+ @param PalEntryPoint The PAL procedure calls entry point.\r
+ @param Index The PAL procedure Index number.\r
+ @param Arg2 The 2nd parameter for PAL procedure calls.\r
+ @param Arg3 The 3rd parameter for PAL procedure calls.\r
+ @param Arg4 The 4th parameter for PAL procedure calls.\r
\r
- Flushes all the Translation Lookaside Buffers(TLB) entries in a CPU.\r
+ @return structure returned from the PAL Call procedure, including the status and return value.\r
\r
**/\r
-VOID\r
+PAL_CALL_RETURN\r
EFIAPI\r
-CpuFlushTlb (\r
- VOID\r
+AsmPalCall (\r
+ IN UINT64 PalEntryPoint,\r
+ IN UINT64 Index,\r
+ IN UINT64 Arg2,\r
+ IN UINT64 Arg3,\r
+ IN UINT64 Arg4\r
);\r
\r
+\r
/**\r
Transfers control to a function starting with a new stack.\r
\r
function.\r
@param NewStack A pointer to the new stack to use for the EntryPoint\r
function.\r
+ @param NewBsp A pointer to the new memory location for RSE backing\r
+ store.\r
\r
**/\r
VOID\r
EFIAPI\r
-SwitchStack (\r
+AsmSwitchStackAndBackingStore (\r
IN SWITCH_STACK_ENTRY_POINT EntryPoint,\r
IN VOID *Context1, OPTIONAL\r
IN VOID *Context2, OPTIONAL\r
- IN VOID *NewStack\r
+ IN VOID *NewStack,\r
+ IN VOID *NewBsp\r
);\r
\r
/**\r
- Generates a breakpoint on the CPU.\r
+ @todo This call should be removed after the PalCall\r
+ Instance issue has been fixed.\r
\r
- Generates a breakpoint on the CPU. The breakpoint must be implemented such\r
- that code can resume normal execution after the breakpoint.\r
+ Performs a PAL call using static calling convention.\r
\r
-**/\r
-VOID\r
-EFIAPI\r
-CpuBreakpoint (\r
- VOID\r
- );\r
+ An internal function to perform a PAL call using static calling convention.\r
\r
-/**\r
- Executes an infinite loop.\r
+ @param PalEntryPoint The entry point address of PAL. The address in ar.kr5\r
+ would be used if this parameter were NULL on input.\r
+ @param Arg1 The first argument of a PAL call.\r
+ @param Arg2 The second argument of a PAL call.\r
+ @param Arg3 The third argument of a PAL call.\r
+ @param Arg4 The fourth argument of a PAL call.\r
\r
- Forces the CPU to execute an infinite loop. A debugger may be used to skip\r
- past the loop and the code that follows the loop must execute properly. This\r
- implies that the infinite loop must not cause the code that follow it to be\r
- optimized away.\r
+ @return The values returned in r8, r9, r10 and r11.\r
\r
**/\r
-VOID\r
-EFIAPI\r
-CpuDeadLoop (\r
- VOID\r
+PAL_CALL_RETURN\r
+PalCallStatic (\r
+ IN CONST VOID *PalEntryPoint,\r
+ IN UINT64 Arg1,\r
+ IN UINT64 Arg2,\r
+ IN UINT64 Arg3,\r
+ IN UINT64 Arg4\r
);\r
\r
-//\r
-// IA32 and X64 Specific Functions\r
-//\r
-//\r
-// Byte packed structure for 16-bit Real Mode EFLAGS\r
-//\r
+\r
+#elif defined (MDE_CPU_IA32) || defined (MDE_CPU_X64)\r
+///\r
+/// IA32 and X64 Specific Functions\r
+/// Byte packed structure for 16-bit Real Mode EFLAGS\r
+///\r
typedef union {\r
struct {\r
- UINT32 CF:1; // Carry Flag\r
- UINT32 Reserved_0:1; // Reserved\r
- UINT32 PF:1; // Parity Flag\r
- UINT32 Reserved_1:1; // Reserved\r
- UINT32 AF:1; // Auxiliary Carry Flag\r
- UINT32 Reserved_2:1; // Reserved\r
- UINT32 ZF:1; // Zero Flag\r
- UINT32 SF:1; // Sign Flag\r
- UINT32 TF:1; // Trap Flag\r
- UINT32 IF:1; // Interrupt Enable Flag\r
- UINT32 DF:1; // Direction Flag\r
- UINT32 OF:1; // Overflow Flag\r
- UINT32 IOPL:2; // I/O Privilege Level\r
- UINT32 NT:1; // Nested Task\r
- UINT32 Reserved_3:1; // Reserved\r
+ UINT32 CF:1; /// Carry Flag\r
+ UINT32 Reserved_0:1; /// Reserved\r
+ UINT32 PF:1; /// Parity Flag\r
+ UINT32 Reserved_1:1; /// Reserved\r
+ UINT32 AF:1; /// Auxiliary Carry Flag\r
+ UINT32 Reserved_2:1; /// Reserved\r
+ UINT32 ZF:1; /// Zero Flag\r
+ UINT32 SF:1; /// Sign Flag\r
+ UINT32 TF:1; /// Trap Flag\r
+ UINT32 IF:1; /// Interrupt Enable Flag\r
+ UINT32 DF:1; /// Direction Flag\r
+ UINT32 OF:1; /// Overflow Flag\r
+ UINT32 IOPL:2; /// I/O Privilege Level\r
+ UINT32 NT:1; /// Nested Task\r
+ UINT32 Reserved_3:1; /// Reserved\r
} Bits;\r
UINT16 Uint16;\r
} IA32_FLAGS16;\r
\r
-//\r
-// Byte packed structure for EFLAGS/RFLAGS\r
-// 32-bits on IA-32\r
-// 64-bits on X64. The upper 32-bits on X64 are reserved\r
-//\r
+///\r
+/// Byte packed structure for EFLAGS/RFLAGS\r
+/// 32-bits on IA-32\r
+/// 64-bits on X64. The upper 32-bits on X64 are reserved\r
+///\r
typedef union {\r
struct {\r
- UINT32 CF:1; // Carry Flag\r
- UINT32 Reserved_0:1; // Reserved\r
- UINT32 PF:1; // Parity Flag\r
- UINT32 Reserved_1:1; // Reserved\r
- UINT32 AF:1; // Auxiliary Carry Flag\r
- UINT32 Reserved_2:1; // Reserved\r
- UINT32 ZF:1; // Zero Flag\r
- UINT32 SF:1; // Sign Flag\r
- UINT32 TF:1; // Trap Flag\r
- UINT32 IF:1; // Interrupt Enable Flag\r
- UINT32 DF:1; // Direction Flag\r
- UINT32 OF:1; // Overflow Flag\r
- UINT32 IOPL:2; // I/O Privilege Level\r
- UINT32 NT:1; // Nested Task\r
- UINT32 Reserved_3:1; // Reserved\r
- UINT32 RF:1; // Resume Flag\r
- UINT32 VM:1; // Virtual 8086 Mode\r
- UINT32 AC:1; // Alignment Check\r
- UINT32 VIF:1; // Virtual Interrupt Flag\r
- UINT32 VIP:1; // Virtual Interrupt Pending\r
- UINT32 ID:1; // ID Flag\r
- UINT32 Reserved_4:10; // Reserved\r
+ UINT32 CF:1; /// Carry Flag\r
+ UINT32 Reserved_0:1; /// Reserved\r
+ UINT32 PF:1; /// Parity Flag\r
+ UINT32 Reserved_1:1; /// Reserved\r
+ UINT32 AF:1; /// Auxiliary Carry Flag\r
+ UINT32 Reserved_2:1; /// Reserved\r
+ UINT32 ZF:1; /// Zero Flag\r
+ UINT32 SF:1; /// Sign Flag\r
+ UINT32 TF:1; /// Trap Flag\r
+ UINT32 IF:1; /// Interrupt Enable Flag\r
+ UINT32 DF:1; /// Direction Flag\r
+ UINT32 OF:1; /// Overflow Flag\r
+ UINT32 IOPL:2; /// I/O Privilege Level\r
+ UINT32 NT:1; /// Nested Task\r
+ UINT32 Reserved_3:1; /// Reserved\r
+ UINT32 RF:1; /// Resume Flag\r
+ UINT32 VM:1; /// Virtual 8086 Mode\r
+ UINT32 AC:1; /// Alignment Check\r
+ UINT32 VIF:1; /// Virtual Interrupt Flag\r
+ UINT32 VIP:1; /// Virtual Interrupt Pending\r
+ UINT32 ID:1; /// ID Flag\r
+ UINT32 Reserved_4:10; /// Reserved\r
} Bits;\r
UINTN UintN;\r
} IA32_EFLAGS32;\r
\r
-//\r
-// Byte packed structure for Control Register 0 (CR0)\r
-// 32-bits on IA-32\r
-// 64-bits on X64. The upper 32-bits on X64 are reserved\r
-//\r
+///\r
+/// Byte packed structure for Control Register 0 (CR0)\r
+/// 32-bits on IA-32\r
+/// 64-bits on X64. The upper 32-bits on X64 are reserved\r
+///\r
typedef union {\r
struct {\r
- UINT32 PE:1; // Protection Enable\r
- UINT32 MP:1; // Monitor Coprocessor\r
- UINT32 EM:1; // Emulation\r
- UINT32 TS:1; // Task Switched\r
- UINT32 ET:1; // Extension Type\r
- UINT32 NE:1; // Numeric Error\r
- UINT32 Reserved_0:10; // Reserved\r
- UINT32 WP:1; // Write Protect\r
- UINT32 Reserved_1:1; // Reserved\r
- UINT32 AM:1; // Alignment Mask\r
- UINT32 Reserved_2:10; // Reserved\r
- UINT32 NW:1; // Mot Write-through\r
- UINT32 CD:1; // Cache Disable\r
- UINT32 PG:1; // Paging\r
+ UINT32 PE:1; /// Protection Enable\r
+ UINT32 MP:1; /// Monitor Coprocessor\r
+ UINT32 EM:1; /// Emulation\r
+ UINT32 TS:1; /// Task Switched\r
+ UINT32 ET:1; /// Extension Type\r
+ UINT32 NE:1; /// Numeric Error\r
+ UINT32 Reserved_0:10; /// Reserved\r
+ UINT32 WP:1; /// Write Protect\r
+ UINT32 Reserved_1:1; /// Reserved\r
+ UINT32 AM:1; /// Alignment Mask\r
+ UINT32 Reserved_2:10; /// Reserved\r
+ UINT32 NW:1; /// Mot Write-through\r
+ UINT32 CD:1; /// Cache Disable\r
+ UINT32 PG:1; /// Paging\r
} Bits;\r
UINTN UintN;\r
} IA32_CR0;\r
\r
-//\r
-// Byte packed structure for Control Register 4 (CR4)\r
-// 32-bits on IA-32\r
-// 64-bits on X64. The upper 32-bits on X64 are reserved\r
-//\r
+///\r
+/// Byte packed structure for Control Register 4 (CR4)\r
+/// 32-bits on IA-32\r
+/// 64-bits on X64. The upper 32-bits on X64 are reserved\r
+///\r
typedef union {\r
struct {\r
- UINT32 VME:1; // Virtual-8086 Mode Extensions\r
- UINT32 PVI:1; // Protected-Mode Virtual Interrupts\r
- UINT32 TSD:1; // Time Stamp Disable\r
- UINT32 DE:1; // Debugging Extensions\r
- UINT32 PSE:1; // Page Size Extensions\r
- UINT32 PAE:1; // Physical Address Extension\r
- UINT32 MCE:1; // Machine Check Enable\r
- UINT32 PGE:1; // Page Global Enable\r
- UINT32 PCE:1; // Performance Monitoring Counter\r
- // Enable\r
- UINT32 OSFXSR:1; // Operating System Support for\r
- // FXSAVE and FXRSTOR instructions\r
- UINT32 OSXMMEXCPT:1; // Operating System Support for\r
- // Unmasked SIMD Floating Point\r
- // Exceptions\r
- UINT32 Reserved_0:2; // Reserved\r
- UINT32 VMXE:1; // VMX Enable\r
- UINT32 Reserved_1:18; // Reseved\r
+ UINT32 VME:1; /// Virtual-8086 Mode Extensions\r
+ UINT32 PVI:1; /// Protected-Mode Virtual Interrupts\r
+ UINT32 TSD:1; /// Time Stamp Disable\r
+ UINT32 DE:1; /// Debugging Extensions\r
+ UINT32 PSE:1; /// Page Size Extensions\r
+ UINT32 PAE:1; /// Physical Address Extension\r
+ UINT32 MCE:1; /// Machine Check Enable\r
+ UINT32 PGE:1; /// Page Global Enable\r
+ UINT32 PCE:1; /// Performance Monitoring Counter\r
+ /// Enable\r
+ UINT32 OSFXSR:1; /// Operating System Support for\r
+ /// FXSAVE and FXRSTOR instructions\r
+ UINT32 OSXMMEXCPT:1; /// Operating System Support for\r
+ /// Unmasked SIMD Floating Point\r
+ /// Exceptions\r
+ UINT32 Reserved_0:2; /// Reserved\r
+ UINT32 VMXE:1; /// VMX Enable\r
+ UINT32 Reserved_1:18; /// Reseved\r
} Bits;\r
UINTN UintN;\r
} IA32_CR4;\r
\r
-//\r
-// Byte packed structure for an IDTR, GDTR, LDTR descriptor\r
-//\r
+///\r
+/// Byte packed structure for an IDTR, GDTR, LDTR descriptor\r
+/// @todo How to make this structure byte-packed in a compiler independent way?\r
+///\r
+#pragma pack (1)\r
typedef struct {\r
UINT16 Limit;\r
UINTN Base;\r
} IA32_DESCRIPTOR;\r
+#pragma pack ()\r
\r
#define IA32_IDT_GATE_TYPE_TASK 0x85\r
#define IA32_IDT_GATE_TYPE_INTERRUPT_16 0x86\r
#define IA32_IDT_GATE_TYPE_INTERRUPT_32 0x8E\r
#define IA32_IDT_GATE_TYPE_TRAP_32 0x8F\r
\r
-//\r
-// Byte packed structure for an Interrupt Gate Descriptor\r
-//\r
+///\r
+/// Byte packed structure for an Interrupt Gate Descriptor\r
+///\r
typedef union {\r
struct {\r
- UINT32 OffsetLow:16; // Offset bits 15..0\r
- UINT32 Selector:16; // Selector\r
- UINT32 Reserved_0:8; // Reserved\r
- UINT32 GateType:8; // Gate Type. See #defines above\r
- UINT32 OffsetHigh:16; // Offset bits 31..16\r
+ UINT32 OffsetLow:16; /// Offset bits 15..0\r
+ UINT32 Selector:16; /// Selector\r
+ UINT32 Reserved_0:8; /// Reserved\r
+ UINT32 GateType:8; /// Gate Type. See #defines above\r
+ UINT32 OffsetHigh:16; /// Offset bits 31..16\r
} Bits;\r
UINT64 Uint64;\r
} IA32_IDT_GATE_DESCRIPTOR;\r
\r
-//\r
-// Byte packed structure for an FP/SSE/SSE2 context\r
-//\r
+///\r
+/// Byte packed structure for an FP/SSE/SSE2 context\r
+///\r
typedef struct {\r
UINT8 Buffer[512];\r
} IA32_FX_BUFFER;\r
\r
-//\r
-// Structures for the 16-bit real mode thunks\r
-//\r
+///\r
+/// Structures for the 16-bit real mode thunks\r
+///\r
typedef struct {\r
UINT32 Reserved1;\r
UINT32 Reserved2;\r
IA32_BYTE_REGS H;\r
} IA32_REGISTER_SET;\r
\r
-//\r
-// Byte packed structure for an 16-bit real mode thunks\r
-//\r
+///\r
+/// Byte packed structure for an 16-bit real mode thunks\r
+///\r
typedef struct {\r
- IA32_REGISTER_SET RealModeState;\r
+ IA32_REGISTER_SET *RealModeState;\r
VOID *RealModeBuffer;\r
- UINTN RealModeBufferSize;\r
- VOID *CallStack;\r
- UINTN CallStackSize;\r
- VOID *RealModeCode;\r
- UINTN RealModeCodeSize;\r
+ UINT32 RealModeBufferSize;\r
+ UINT32 ThunkAttributes;\r
} THUNK_CONTEXT;\r
\r
+#define THUNK_ATTRIBUTE_BIG_REAL_MODE 0x00000001\r
+#define THUNK_ATTRIBUTE_DISABLE_A20_MASK_INT_15 0x00000002\r
+#define THUNK_ATTRIBUTE_DISABLE_A20_MASK_KBD_CTRL 0x00000004\r
+\r
/**\r
Retrieves CPUID information.\r
\r
OUT UINT32 *Edx OPTIONAL\r
);\r
\r
+\r
+/**\r
+ Retrieves CPUID information using an extended leaf identifier.\r
+\r
+ Executes the CPUID instruction with EAX set to the value specified by Index\r
+ and ECX set to the value specified by SubIndex. This function always returns\r
+ Index. This function is only available on IA-32 and x64.\r
+\r
+ If Eax is not NULL, then the value of EAX after CPUID is returned in Eax.\r
+ If Ebx is not NULL, then the value of EBX after CPUID is returned in Ebx.\r
+ If Ecx is not NULL, then the value of ECX after CPUID is returned in Ecx.\r
+ If Edx is not NULL, then the value of EDX after CPUID is returned in Edx.\r
+\r
+ @param Index The 32-bit value to load into EAX prior to invoking the\r
+ CPUID instruction.\r
+ @param SubIndex The 32-bit value to load into ECX prior to invoking the\r
+ CPUID instruction.\r
+ @param Eax Pointer to the 32-bit EAX value returned by the CPUID\r
+ instruction. This is an optional parameter that may be\r
+ NULL.\r
+ @param Ebx Pointer to the 32-bit EBX value returned by the CPUID\r
+ instruction. This is an optional parameter that may be\r
+ NULL.\r
+ @param Ecx Pointer to the 32-bit ECX value returned by the CPUID\r
+ instruction. This is an optional parameter that may be\r
+ NULL.\r
+ @param Edx Pointer to the 32-bit EDX value returned by the CPUID\r
+ instruction. This is an optional parameter that may be\r
+ NULL.\r
+\r
+ @return Index\r
+\r
+**/\r
+UINT32\r
+EFIAPI\r
+AsmCpuidEx (\r
+ IN UINT32 Index,\r
+ IN UINT32 SubIndex,\r
+ OUT UINT32 *Eax, OPTIONAL\r
+ OUT UINT32 *Ebx, OPTIONAL\r
+ OUT UINT32 *Ecx, OPTIONAL\r
+ OUT UINT32 *Edx OPTIONAL\r
+ );\r
+\r
+\r
/**\r
Returns the lower 32-bits of a Machine Specific Register(MSR).\r
\r
IN UINT32 Index\r
);\r
\r
+\r
/**\r
Zero-extend a 32-bit value and writes it to a Machine Specific Register(MSR).\r
\r
IN UINT32 Value\r
);\r
\r
+\r
/**\r
Reads a 64-bit MSR, performs a bitwise inclusive OR on the lower 32-bits, and\r
writes the result back to the 64-bit MSR.\r
IN UINT32 OrData\r
);\r
\r
+\r
/**\r
Reads a 64-bit MSR, performs a bitwise AND on the lower 32-bits, and writes\r
the result back to the 64-bit MSR.\r
IN UINT32 AndData\r
);\r
\r
+\r
/**\r
Reads a 64-bit MSR, performs a bitwise AND followed by a bitwise inclusive OR\r
on the lower 32-bits, and writes the result back to the 64-bit MSR.\r
IN UINT32 OrData\r
);\r
\r
+\r
/**\r
Reads a bit field of an MSR.\r
\r
\r
If StartBit is greater than 31, then ASSERT().\r
If EndBit is greater than 31, then ASSERT().\r
- If EndBit is less than or equal to StartBit, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
\r
@param Index The 32-bit MSR index to read.\r
@param StartBit The ordinal of the least significant bit in the bit field.\r
IN UINTN EndBit\r
);\r
\r
+\r
/**\r
Writes a bit field to an MSR.\r
\r
\r
If StartBit is greater than 31, then ASSERT().\r
If EndBit is greater than 31, then ASSERT().\r
- If EndBit is less than or equal to StartBit, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
\r
@param Index The 32-bit MSR index to write.\r
@param StartBit The ordinal of the least significant bit in the bit field.\r
IN UINT32 Value\r
);\r
\r
+\r
/**\r
Reads a bit field in a 64-bit MSR, performs a bitwise OR, and writes the\r
result back to the bit field in the 64-bit MSR.\r
\r
If StartBit is greater than 31, then ASSERT().\r
If EndBit is greater than 31, then ASSERT().\r
- If EndBit is less than or equal to StartBit, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
\r
@param Index The 32-bit MSR index to write.\r
@param StartBit The ordinal of the least significant bit in the bit field.\r
IN UINT32 OrData\r
);\r
\r
+\r
/**\r
Reads a bit field in a 64-bit MSR, performs a bitwise AND, and writes the\r
result back to the bit field in the 64-bit MSR.\r
\r
If StartBit is greater than 31, then ASSERT().\r
If EndBit is greater than 31, then ASSERT().\r
- If EndBit is less than or equal to StartBit, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
\r
@param Index The 32-bit MSR index to write.\r
@param StartBit The ordinal of the least significant bit in the bit field.\r
IN UINT32 AndData\r
);\r
\r
+\r
/**\r
Reads a bit field in a 64-bit MSR, performs a bitwise AND followed by a\r
bitwise inclusive OR, and writes the result back to the bit field in the\r
\r
If StartBit is greater than 31, then ASSERT().\r
If EndBit is greater than 31, then ASSERT().\r
- If EndBit is less than or equal to StartBit, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
\r
@param Index The 32-bit MSR index to write.\r
@param StartBit The ordinal of the least significant bit in the bit field.\r
IN UINT32 OrData\r
);\r
\r
+\r
/**\r
Returns a 64-bit Machine Specific Register(MSR).\r
\r
IN UINT32 Index\r
);\r
\r
+\r
/**\r
Writes a 64-bit value to a Machine Specific Register(MSR), and returns the\r
value.\r
IN UINT64 Value\r
);\r
\r
+\r
/**\r
Reads a 64-bit MSR, performs a bitwise inclusive OR, and writes the result\r
back to the 64-bit MSR.\r
IN UINT64 OrData\r
);\r
\r
+\r
/**\r
Reads a 64-bit MSR, performs a bitwise AND, and writes the result back to the\r
64-bit MSR.\r
IN UINT64 AndData\r
);\r
\r
+\r
/**\r
Reads a 64-bit MSR, performs a bitwise AND followed by a bitwise inclusive\r
OR, and writes the result back to the 64-bit MSR.\r
IN UINT64 OrData\r
);\r
\r
+\r
/**\r
Reads a bit field of an MSR.\r
\r
\r
If StartBit is greater than 63, then ASSERT().\r
If EndBit is greater than 63, then ASSERT().\r
- If EndBit is less than or equal to StartBit, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
\r
@param Index The 32-bit MSR index to read.\r
@param StartBit The ordinal of the least significant bit in the bit field.\r
IN UINTN EndBit\r
);\r
\r
+\r
/**\r
Writes a bit field to an MSR.\r
\r
\r
If StartBit is greater than 63, then ASSERT().\r
If EndBit is greater than 63, then ASSERT().\r
- If EndBit is less than or equal to StartBit, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
\r
@param Index The 32-bit MSR index to write.\r
@param StartBit The ordinal of the least significant bit in the bit field.\r
IN UINT64 Value\r
);\r
\r
+\r
/**\r
Reads a bit field in a 64-bit MSR, performs a bitwise inclusive OR, and\r
writes the result back to the bit field in the 64-bit MSR.\r
\r
If StartBit is greater than 63, then ASSERT().\r
If EndBit is greater than 63, then ASSERT().\r
- If EndBit is less than or equal to StartBit, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
\r
@param Index The 32-bit MSR index to write.\r
@param StartBit The ordinal of the least significant bit in the bit field.\r
IN UINT64 OrData\r
);\r
\r
+\r
/**\r
Reads a bit field in a 64-bit MSR, performs a bitwise AND, and writes the\r
result back to the bit field in the 64-bit MSR.\r
\r
If StartBit is greater than 63, then ASSERT().\r
If EndBit is greater than 63, then ASSERT().\r
- If EndBit is less than or equal to StartBit, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
\r
@param Index The 32-bit MSR index to write.\r
@param StartBit The ordinal of the least significant bit in the bit field.\r
IN UINT64 AndData\r
);\r
\r
+\r
/**\r
Reads a bit field in a 64-bit MSR, performs a bitwise AND followed by a\r
bitwise inclusive OR, and writes the result back to the bit field in the\r
\r
If StartBit is greater than 63, then ASSERT().\r
If EndBit is greater than 63, then ASSERT().\r
- If EndBit is less than or equal to StartBit, then ASSERT().\r
+ If EndBit is less than StartBit, then ASSERT().\r
\r
@param Index The 32-bit MSR index to write.\r
@param StartBit The ordinal of the least significant bit in the bit field.\r
IN UINT64 OrData\r
);\r
\r
+\r
/**\r
Reads the current value of the EFLAGS register.\r
\r
VOID\r
);\r
\r
+\r
/**\r
Reads the current value of the Control Register 0 (CR0).\r
\r
VOID\r
);\r
\r
+\r
/**\r
Reads the current value of the Control Register 2 (CR2).\r
\r
VOID\r
);\r
\r
+\r
/**\r
Reads the current value of the Control Register 3 (CR3).\r
\r
VOID\r
);\r
\r
+\r
/**\r
Reads the current value of the Control Register 4 (CR4).\r
\r
VOID\r
);\r
\r
+\r
/**\r
Writes a value to Control Register 0 (CR0).\r
\r
UINTN Cr0\r
);\r
\r
+\r
/**\r
Writes a value to Control Register 2 (CR2).\r
\r
UINTN Cr2\r
);\r
\r
+\r
/**\r
Writes a value to Control Register 3 (CR3).\r
\r
UINTN Cr3\r
);\r
\r
+\r
/**\r
Writes a value to Control Register 4 (CR4).\r
\r
UINTN Cr4\r
);\r
\r
+\r
/**\r
Reads the current value of Debug Register 0 (DR0).\r
\r
VOID\r
);\r
\r
+\r
/**\r
Reads the current value of Debug Register 1 (DR1).\r
\r
VOID\r
);\r
\r
+\r
/**\r
Reads the current value of Debug Register 2 (DR2).\r
\r
VOID\r
);\r
\r
+\r
/**\r
Reads the current value of Debug Register 3 (DR3).\r
\r
VOID\r
);\r
\r
+\r
/**\r
Reads the current value of Debug Register 4 (DR4).\r
\r
VOID\r
);\r
\r
+\r
/**\r
Reads the current value of Debug Register 5 (DR5).\r
\r
VOID\r
);\r
\r
+\r
/**\r
Reads the current value of Debug Register 6 (DR6).\r
\r
VOID\r
);\r
\r
+\r
/**\r
Reads the current value of Debug Register 7 (DR7).\r
\r
VOID\r
);\r
\r
+\r
/**\r
Writes a value to Debug Register 0 (DR0).\r
\r
UINTN Dr0\r
);\r
\r
+\r
/**\r
Writes a value to Debug Register 1 (DR1).\r
\r
UINTN Dr1\r
);\r
\r
+\r
/**\r
Writes a value to Debug Register 2 (DR2).\r
\r
UINTN Dr2\r
);\r
\r
+\r
/**\r
Writes a value to Debug Register 3 (DR3).\r
\r
UINTN Dr3\r
);\r
\r
+\r
/**\r
Writes a value to Debug Register 4 (DR4).\r
\r
UINTN Dr4\r
);\r
\r
+\r
/**\r
Writes a value to Debug Register 5 (DR5).\r
\r
UINTN Dr5\r
);\r
\r
+\r
/**\r
Writes a value to Debug Register 6 (DR6).\r
\r
UINTN Dr6\r
);\r
\r
+\r
/**\r
Writes a value to Debug Register 7 (DR7).\r
\r
UINTN Dr7\r
);\r
\r
+\r
/**\r
Reads the current value of Code Segment Register (CS).\r
\r
VOID\r
);\r
\r
+\r
/**\r
Reads the current value of Data Segment Register (DS).\r
\r
VOID\r
);\r
\r
+\r
/**\r
Reads the current value of Extra Segment Register (ES).\r
\r
VOID\r
);\r
\r
+\r
/**\r
Reads the current value of FS Data Segment Register (FS).\r
\r
VOID\r
);\r
\r
+\r
/**\r
Reads the current value of GS Data Segment Register (GS).\r
\r
VOID\r
);\r
\r
+\r
/**\r
Reads the current value of Stack Segment Register (SS).\r
\r
VOID\r
);\r
\r
+\r
/**\r
Reads the current value of Task Register (TR).\r
\r
VOID\r
);\r
\r
+\r
/**\r
Reads the current Global Descriptor Table Register(GDTR) descriptor.\r
\r
OUT IA32_DESCRIPTOR *Gdtr\r
);\r
\r
+\r
/**\r
Writes the current Global Descriptor Table Register (GDTR) descriptor.\r
\r
IN CONST IA32_DESCRIPTOR *Gdtr\r
);\r
\r
+\r
/**\r
Reads the current Interrupt Descriptor Table Register(GDTR) descriptor.\r
\r
OUT IA32_DESCRIPTOR *Idtr\r
);\r
\r
+\r
/**\r
Writes the current Interrupt Descriptor Table Register(GDTR) descriptor.\r
\r
IN CONST IA32_DESCRIPTOR *Idtr\r
);\r
\r
+\r
/**\r
Reads the current Local Descriptor Table Register(LDTR) selector.\r
\r
VOID\r
);\r
\r
+\r
/**\r
Writes the current Local Descriptor Table Register (GDTR) selector.\r
\r
IN UINT16 Ldtr\r
);\r
\r
+\r
/**\r
Save the current floating point/SSE/SSE2 context to a buffer.\r
\r
OUT IA32_FX_BUFFER *Buffer\r
);\r
\r
+\r
/**\r
Restores the current floating point/SSE/SSE2 context from a buffer.\r
\r
IN CONST IA32_FX_BUFFER *Buffer\r
);\r
\r
+\r
/**\r
Reads the current value of 64-bit MMX Register #0 (MM0).\r
\r
VOID\r
);\r
\r
+\r
/**\r
Reads the current value of 64-bit MMX Register #1 (MM1).\r
\r
VOID\r
);\r
\r
+\r
/**\r
Reads the current value of 64-bit MMX Register #2 (MM2).\r
\r
VOID\r
);\r
\r
+\r
/**\r
Reads the current value of 64-bit MMX Register #3 (MM3).\r
\r
VOID\r
);\r
\r
+\r
/**\r
Reads the current value of 64-bit MMX Register #4 (MM4).\r
\r
VOID\r
);\r
\r
+\r
/**\r
Reads the current value of 64-bit MMX Register #5 (MM5).\r
\r
VOID\r
);\r
\r
+\r
/**\r
Reads the current value of 64-bit MMX Register #6 (MM6).\r
\r
VOID\r
);\r
\r
+\r
/**\r
Reads the current value of 64-bit MMX Register #7 (MM7).\r
\r
VOID\r
);\r
\r
+\r
/**\r
Writes the current value of 64-bit MMX Register #0 (MM0).\r
\r
IN UINT64 Value\r
);\r
\r
+\r
/**\r
Writes the current value of 64-bit MMX Register #1 (MM1).\r
\r
IN UINT64 Value\r
);\r
\r
+\r
/**\r
Writes the current value of 64-bit MMX Register #2 (MM2).\r
\r
IN UINT64 Value\r
);\r
\r
+\r
/**\r
Writes the current value of 64-bit MMX Register #3 (MM3).\r
\r
IN UINT64 Value\r
);\r
\r
+\r
/**\r
Writes the current value of 64-bit MMX Register #4 (MM4).\r
\r
IN UINT64 Value\r
);\r
\r
+\r
/**\r
Writes the current value of 64-bit MMX Register #5 (MM5).\r
\r
IN UINT64 Value\r
);\r
\r
+\r
/**\r
Writes the current value of 64-bit MMX Register #6 (MM6).\r
\r
IN UINT64 Value\r
);\r
\r
+\r
/**\r
Writes the current value of 64-bit MMX Register #7 (MM7).\r
\r
IN UINT64 Value\r
);\r
\r
+\r
/**\r
Reads the current value of Time Stamp Counter (TSC).\r
\r
VOID\r
);\r
\r
+\r
/**\r
Reads the current value of a Performance Counter (PMC).\r
\r
IN UINT32 Index\r
);\r
\r
+\r
/**\r
Sets up a monitor buffer that is used by AsmMwait().\r
\r
IN UINTN Edx\r
);\r
\r
+\r
/**\r
Executes an MWAIT instruction.\r
\r
IN UINTN Ecx\r
);\r
\r
+\r
/**\r
Executes a WBINVD instruction.\r
\r
VOID\r
);\r
\r
+\r
/**\r
Executes a INVD instruction.\r
\r
VOID\r
);\r
\r
+\r
/**\r
Flushes a cache line from all the instruction and data caches within the\r
coherency domain of the CPU.\r
IN VOID *LinearAddress\r
);\r
\r
+\r
/**\r
Enables the 32-bit paging mode on the CPU.\r
\r
IN VOID *NewStack\r
);\r
\r
+\r
/**\r
Disables the 32-bit paging mode on the CPU.\r
\r
IN VOID *NewStack\r
);\r
\r
+\r
/**\r
Enables the 64-bit paging mode on the CPU.\r
\r
If EntryPoint is 0, then ASSERT().\r
If NewStack is 0, then ASSERT().\r
\r
- @param Cs The 16-bit selector to load in the CS before EntryPoint\r
+ @param CodeSelector The 16-bit selector to load in the CS before EntryPoint\r
is called. The descriptor in the GDT that this selector\r
references must be setup for long mode.\r
@param EntryPoint The 64-bit virtual address of the function to call with\r
IN UINT64 NewStack\r
);\r
\r
+\r
/**\r
Disables the 64-bit paging mode on the CPU.\r
\r
If EntryPoint is 0, then ASSERT().\r
If NewStack is 0, then ASSERT().\r
\r
- @param Cs The 16-bit selector to load in the CS before EntryPoint\r
+ @param CodeSelector The 16-bit selector to load in the CS before EntryPoint\r
is called. The descriptor in the GDT that this selector\r
references must be setup for 32-bit protected mode.\r
@param EntryPoint The 64-bit virtual address of the function to call with\r
IN UINT32 NewStack\r
);\r
\r
+\r
//\r
// 16-bit thunking services\r
//\r
\r
+/**\r
+ Retrieves the properties for 16-bit thunk functions.\r
+\r
+ Computes the size of the buffer and stack below 1MB required to use the\r
+ AsmPrepareThunk16(), AsmThunk16() and AsmPrepareAndThunk16() functions. This\r
+ buffer size is returned in RealModeBufferSize, and the stack size is returned\r
+ in ExtraStackSize. If parameters are passed to the 16-bit real mode code,\r
+ then the actual minimum stack size is ExtraStackSize plus the maximum number\r
+ of bytes that need to be passed to the 16-bit real mode code.\r
+\r
+ If RealModeBufferSize is NULL, then ASSERT().\r
+ If ExtraStackSize is NULL, then ASSERT().\r
+\r
+ @param RealModeBufferSize A pointer to the size of the buffer below 1MB\r
+ required to use the 16-bit thunk functions.\r
+ @param ExtraStackSize A pointer to the extra size of stack below 1MB\r
+ that the 16-bit thunk functions require for\r
+ temporary storage in the transition to and from\r
+ 16-bit real mode.\r
+\r
+**/\r
+VOID\r
+EFIAPI\r
+AsmGetThunk16Properties (\r
+ OUT UINT32 *RealModeBufferSize,\r
+ OUT UINT32 *ExtraStackSize\r
+ );\r
+\r
+\r
/**\r
Prepares all structures a code required to use AsmThunk16().\r
\r
OUT THUNK_CONTEXT *ThunkContext\r
);\r
\r
+\r
/**\r
Transfers control to a 16-bit real mode entry point and returns the results.\r
\r
IN OUT THUNK_CONTEXT *ThunkContext\r
);\r
\r
+\r
/**\r
Prepares all structures and code for a 16-bit real mode thunk, transfers\r
control to a 16-bit real mode entry point, and returns the results.\r
);\r
\r
#endif\r
+#endif\r
+\r
+\r
projects / mirror_edk2.git / blobdiff