Provides services to access PCI Configuration Space using the MMIO PCI Express window.\r
\r
This library is identical to the PCI Library, except the access method for performing PCI \r
- configuration cycles must be though the 256 MB PCI Express MMIO window whose base address\r
+ configuration cycles must be through the 256 MB PCI Express MMIO window whose base address\r
is defined by PcdPciExpressBaseAddress.\r
\r
-Copyright (c) 2006 - 2008, Intel Corporation\r
-All rights reserved. This program and the accompanying materials\r
+Copyright (c) 2006 - 2017, Intel Corporation. All rights reserved.<BR>\r
+This program and the accompanying materials\r
are licensed and made available under the terms and conditions of the BSD License\r
which accompanies this distribution. The full text of the license may be found at\r
http://opensource.org/licenses/bsd-license.php\r
@return The encode PCI address.\r
\r
**/\r
-#define PCI_EXPRESS_LIB_ADDRESS(Bus,Device,Function,Offset) \\r
- (((Offset) & 0xfff) | (((Function) & 0x07) << 12) | (((Device) & 0x1f) << 15) | (((Bus) & 0xff) << 20))\r
+#define PCI_EXPRESS_LIB_ADDRESS(Bus,Device,Function,Offset) PCI_ECAM_ADDRESS ((Bus), (Device), (Function), (Offset))\r
+\r
+/**\r
+ Registers a PCI device so PCI configuration registers may be accessed after \r
+ SetVirtualAddressMap().\r
+ \r
+ Registers the PCI device specified by Address so all the PCI configuration \r
+ registers associated with that PCI device may be accessed after SetVirtualAddressMap() \r
+ is called.\r
+ \r
+ If Address > 0x0FFFFFFF, then ASSERT().\r
+\r
+ @param Address Address that encodes the PCI Bus, Device, Function and\r
+ Register.\r
+ \r
+ @retval RETURN_SUCCESS The PCI device was registered for runtime access.\r
+ @retval RETURN_UNSUPPORTED An attempt was made to call this function \r
+ after ExitBootServices().\r
+ @retval RETURN_UNSUPPORTED The resources required to access the PCI device\r
+ at runtime could not be mapped.\r
+ @retval RETURN_OUT_OF_RESOURCES There are not enough resources available to\r
+ complete the registration.\r
+\r
+**/\r
+RETURN_STATUS\r
+EFIAPI\r
+PciExpressRegisterForRuntimeAccess (\r
+ IN UINTN Address\r
+ );\r
\r
/**\r
Reads an 8-bit PCI configuration register.\r
);\r
\r
/**\r
- Performs a bitwise inclusive OR of an 8-bit PCI configuration register with\r
+ Performs a bitwise OR of an 8-bit PCI configuration register with\r
an 8-bit value.\r
\r
Reads the 8-bit PCI configuration register specified by Address, performs a\r
- bitwise inclusive OR between the read result and the value specified by\r
+ bitwise OR between the read result and the value specified by\r
OrData, and writes the result to the 8-bit PCI configuration register\r
specified by Address. The value written to the PCI configuration register is\r
returned. This function must guarantee that all PCI read and write operations\r
\r
/**\r
Performs a bitwise AND of an 8-bit PCI configuration register with an 8-bit\r
- value, followed a bitwise inclusive OR with another 8-bit value.\r
+ value, followed a bitwise OR with another 8-bit value.\r
\r
Reads the 8-bit PCI configuration register specified by Address, performs a\r
bitwise AND between the read result and the value specified by AndData,\r
- performs a bitwise inclusive OR between the result of the AND operation and\r
+ performs a bitwise OR between the result of the AND operation and\r
the value specified by OrData, and writes the result to the 8-bit PCI\r
configuration register specified by Address. The value written to the PCI\r
configuration register is returned. This function must guarantee that all PCI\r
If StartBit is greater than 7, then ASSERT().\r
If EndBit is greater than 7, then ASSERT().\r
If EndBit is less than StartBit, then ASSERT().\r
+ If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().\r
\r
@param Address PCI configuration register to write.\r
@param StartBit The ordinal of the least significant bit in the bit field.\r
writes the result back to the bit field in the 8-bit port.\r
\r
Reads the 8-bit PCI configuration register specified by Address, performs a\r
- bitwise inclusive OR between the read result and the value specified by\r
+ bitwise OR between the read result and the value specified by\r
OrData, and writes the result to the 8-bit PCI configuration register\r
specified by Address. The value written to the PCI configuration register is\r
returned. This function must guarantee that all PCI read and write operations\r
If StartBit is greater than 7, then ASSERT().\r
If EndBit is greater than 7, then ASSERT().\r
If EndBit is less than StartBit, then ASSERT().\r
+ If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().\r
\r
@param Address PCI configuration register to write.\r
@param StartBit The ordinal of the least significant bit in the bit field.\r
If StartBit is greater than 7, then ASSERT().\r
If EndBit is greater than 7, then ASSERT().\r
If EndBit is less than StartBit, then ASSERT().\r
+ If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().\r
\r
@param Address PCI configuration register to write.\r
@param StartBit The ordinal of the least significant bit in the bit field.\r
\r
/**\r
Reads a bit field in an 8-bit port, performs a bitwise AND followed by a\r
- bitwise inclusive OR, and writes the result back to the bit field in the\r
+ bitwise OR, and writes the result back to the bit field in the\r
8-bit port.\r
\r
Reads the 8-bit PCI configuration register specified by Address, performs a\r
- bitwise AND followed by a bitwise inclusive OR between the read result and\r
+ bitwise AND followed by a bitwise OR between the read result and\r
the value specified by AndData, and writes the result to the 8-bit PCI\r
configuration register specified by Address. The value written to the PCI\r
configuration register is returned. This function must guarantee that all PCI\r
If StartBit is greater than 7, then ASSERT().\r
If EndBit is greater than 7, then ASSERT().\r
If EndBit is less than StartBit, then ASSERT().\r
+ If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().\r
+ If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().\r
\r
@param Address PCI configuration register to write.\r
@param StartBit The ordinal of the least significant bit in the bit field.\r
);\r
\r
/**\r
- Performs a bitwise inclusive OR of a 16-bit PCI configuration register with\r
+ Performs a bitwise OR of a 16-bit PCI configuration register with\r
a 16-bit value.\r
\r
Reads the 16-bit PCI configuration register specified by Address, performs a\r
- bitwise inclusive OR between the read result and the value specified by\r
+ bitwise OR between the read result and the value specified by\r
OrData, and writes the result to the 16-bit PCI configuration register\r
specified by Address. The value written to the PCI configuration register is\r
returned. This function must guarantee that all PCI read and write operations\r
\r
/**\r
Performs a bitwise AND of a 16-bit PCI configuration register with a 16-bit\r
- value, followed a bitwise inclusive OR with another 16-bit value.\r
+ value, followed a bitwise OR with another 16-bit value.\r
\r
Reads the 16-bit PCI configuration register specified by Address, performs a\r
bitwise AND between the read result and the value specified by AndData,\r
- performs a bitwise inclusive OR between the result of the AND operation and\r
+ performs a bitwise OR between the result of the AND operation and\r
the value specified by OrData, and writes the result to the 16-bit PCI\r
configuration register specified by Address. The value written to the PCI\r
configuration register is returned. This function must guarantee that all PCI\r
If StartBit is greater than 15, then ASSERT().\r
If EndBit is greater than 15, then ASSERT().\r
If EndBit is less than StartBit, then ASSERT().\r
+ If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().\r
\r
@param Address PCI configuration register to write.\r
@param StartBit The ordinal of the least significant bit in the bit field.\r
writes the result back to the bit field in the 16-bit port.\r
\r
Reads the 16-bit PCI configuration register specified by Address, performs a\r
- bitwise inclusive OR between the read result and the value specified by\r
+ bitwise OR between the read result and the value specified by\r
OrData, and writes the result to the 16-bit PCI configuration register\r
specified by Address. The value written to the PCI configuration register is\r
returned. This function must guarantee that all PCI read and write operations\r
If StartBit is greater than 15, then ASSERT().\r
If EndBit is greater than 15, then ASSERT().\r
If EndBit is less than StartBit, then ASSERT().\r
+ If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().\r
\r
@param Address PCI configuration register to write.\r
@param StartBit The ordinal of the least significant bit in the bit field.\r
If StartBit is greater than 15, then ASSERT().\r
If EndBit is greater than 15, then ASSERT().\r
If EndBit is less than StartBit, then ASSERT().\r
+ If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().\r
\r
@param Address PCI configuration register to write.\r
@param StartBit The ordinal of the least significant bit in the bit field.\r
\r
/**\r
Reads a bit field in a 16-bit port, performs a bitwise AND followed by a\r
- bitwise inclusive OR, and writes the result back to the bit field in the\r
+ bitwise OR, and writes the result back to the bit field in the\r
16-bit port.\r
\r
Reads the 16-bit PCI configuration register specified by Address, performs a\r
- bitwise AND followed by a bitwise inclusive OR between the read result and\r
+ bitwise AND followed by a bitwise OR between the read result and\r
the value specified by AndData, and writes the result to the 16-bit PCI\r
configuration register specified by Address. The value written to the PCI\r
configuration register is returned. This function must guarantee that all PCI\r
If StartBit is greater than 15, then ASSERT().\r
If EndBit is greater than 15, then ASSERT().\r
If EndBit is less than StartBit, then ASSERT().\r
+ If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().\r
+ If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().\r
\r
@param Address PCI configuration register to write.\r
@param StartBit The ordinal of the least significant bit in the bit field.\r
);\r
\r
/**\r
- Performs a bitwise inclusive OR of a 32-bit PCI configuration register with\r
+ Performs a bitwise OR of a 32-bit PCI configuration register with\r
a 32-bit value.\r
\r
Reads the 32-bit PCI configuration register specified by Address, performs a\r
- bitwise inclusive OR between the read result and the value specified by\r
+ bitwise OR between the read result and the value specified by\r
OrData, and writes the result to the 32-bit PCI configuration register\r
specified by Address. The value written to the PCI configuration register is\r
returned. This function must guarantee that all PCI read and write operations\r
\r
/**\r
Performs a bitwise AND of a 32-bit PCI configuration register with a 32-bit\r
- value, followed a bitwise inclusive OR with another 32-bit value.\r
+ value, followed a bitwise OR with another 32-bit value.\r
\r
Reads the 32-bit PCI configuration register specified by Address, performs a\r
bitwise AND between the read result and the value specified by AndData,\r
- performs a bitwise inclusive OR between the result of the AND operation and\r
+ performs a bitwise OR between the result of the AND operation and\r
the value specified by OrData, and writes the result to the 32-bit PCI\r
configuration register specified by Address. The value written to the PCI\r
configuration register is returned. This function must guarantee that all PCI\r
If StartBit is greater than 31, then ASSERT().\r
If EndBit is greater than 31, then ASSERT().\r
If EndBit is less than StartBit, then ASSERT().\r
+ If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().\r
\r
@param Address PCI configuration register to write.\r
@param StartBit The ordinal of the least significant bit in the bit field.\r
writes the result back to the bit field in the 32-bit port.\r
\r
Reads the 32-bit PCI configuration register specified by Address, performs a\r
- bitwise inclusive OR between the read result and the value specified by\r
+ bitwise OR between the read result and the value specified by\r
OrData, and writes the result to the 32-bit PCI configuration register\r
specified by Address. The value written to the PCI configuration register is\r
returned. This function must guarantee that all PCI read and write operations\r
If StartBit is greater than 31, then ASSERT().\r
If EndBit is greater than 31, then ASSERT().\r
If EndBit is less than StartBit, then ASSERT().\r
+ If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().\r
\r
@param Address PCI configuration register to write.\r
@param StartBit The ordinal of the least significant bit in the bit field.\r
If StartBit is greater than 31, then ASSERT().\r
If EndBit is greater than 31, then ASSERT().\r
If EndBit is less than StartBit, then ASSERT().\r
+ If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().\r
\r
@param Address PCI configuration register to write.\r
@param StartBit The ordinal of the least significant bit in the bit field.\r
\r
/**\r
Reads a bit field in a 32-bit port, performs a bitwise AND followed by a\r
- bitwise inclusive OR, and writes the result back to the bit field in the\r
+ bitwise OR, and writes the result back to the bit field in the\r
32-bit port.\r
\r
Reads the 32-bit PCI configuration register specified by Address, performs a\r
- bitwise AND followed by a bitwise inclusive OR between the read result and\r
+ bitwise AND followed by a bitwise OR between the read result and\r
the value specified by AndData, and writes the result to the 32-bit PCI\r
configuration register specified by Address. The value written to the PCI\r
configuration register is returned. This function must guarantee that all PCI\r
If StartBit is greater than 31, then ASSERT().\r
If EndBit is greater than 31, then ASSERT().\r
If EndBit is less than StartBit, then ASSERT().\r
+ If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().\r
+ If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().\r
\r
@param Address PCI configuration register to write.\r
@param StartBit The ordinal of the least significant bit in the bit field.\r
projects / mirror_edk2.git / blobdiff