Provides library functions for each of the UEFI Runtime Services.\r
Only available to DXE and UEFI module types.\r
\r
-Copyright (c) 2006 - 2008, Intel Corporation<BR>\r
-All rights reserved. This program and the accompanying materials\r
-are licensed and made available under the terms and conditions of the BSD License\r
-which accompanies this distribution. The full text of the license may be found at\r
-http://opensource.org/licenses/bsd-license.php\r
+Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>\r
+This program and the accompanying materials are licensed and made available under\r
+the terms and conditions of the BSD License that accompanies this distribution.\r
+The full text of the license may be found at\r
+http://opensource.org/licenses/bsd-license.php.\r
\r
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
#ifndef __UEFI_RUNTIME_LIB__\r
#define __UEFI_RUNTIME_LIB__\r
\r
-\r
-extern const EFI_EVENT_NOTIFY _gDriverExitBootServicesEvent[];\r
-\r
-extern const EFI_EVENT_NOTIFY _gDriverSetVirtualAddressMapEvent[];\r
-\r
/**\r
This function allows the caller to determine if UEFI ExitBootServices() has been called.\r
\r
);\r
\r
/**\r
- This function allows the caller to determine if UEFI SetVirtualAddressMap() has been called. \r
+ This function allows the caller to determine if UEFI SetVirtualAddressMap() has been called.\r
\r
This function returns TRUE after all the EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGE functions have\r
executed as a result of the OS calling SetVirtualAddressMap(). Prior to this time FALSE\r
information returned by GetTime() are the values that were last set via SetTime().\r
The GetTime() function should take approximately the same amount of time to read the time each\r
time it is called. All reported device capabilities are to be rounded up.\r
- During runtime, if a PC-AT CMOS device is present in the platform the caller must synchronize\r
+ During runtime, if a PC-AT CMOS device is present in the platform, the caller must synchronize\r
access to the device before calling GetTime().\r
\r
@param Time A pointer to storage to receive a snapshot of the current time.\r
to loop based on the current time. For example, if the device does not support a hardware reset\r
for the sub-resolution time, the code is not to implement the feature by waiting for the time to\r
wrap.\r
- During runtime, if a PC-AT CMOS device is present in the platform the caller must synchronize\r
+ During runtime, if a PC-AT CMOS device is present in the platform, the caller must synchronize\r
access to the device before calling SetTime().\r
\r
@param Time A pointer to the current time. Type EFI_TIME is defined in the GetTime()\r
@param Time The current alarm setting. Type EFI_TIME is defined in the GetTime()\r
function description.\r
\r
- @retval EFI_SUCCESS The alarm settings were returned.\r
+ @retval EFI_SUCCESS The alarm settings were returned.\r
@retval EFI_INVALID_PARAMETER Enabled is NULL.\r
@retval EFI_INVALID_PARAMETER Pending is NULL.\r
@retval EFI_INVALID_PARAMETER Time is NULL.\r
This service is a wrapper for the UEFI Runtime Service GetVariable().\r
\r
Each vendor may create and manage its own variables without the risk of name conflicts by\r
- using a unique VendorGuid. When a variable is set its Attributes are supplied to indicate\r
+ using a unique VendorGuid. When a variable is set, its Attributes are supplied to indicate\r
how the data variable should be stored and maintained by the system. The attributes affect\r
when the variable may be accessed and volatility of the data. Any attempts to access a variable\r
that does not have the attribute set for runtime access will yield the EFI_NOT_FOUND error.\r
@param VendorGuid Unify identifier for vendor.\r
@param Attributes Point to memory location to return the attributes of variable. If the point\r
is NULL, the parameter would be ignored.\r
- @param DataSize As input, point to the maxinum size of return Data-Buffer.\r
+ @param DataSize As input, point to the maximum size of return Data-Buffer.\r
As output, point to the actual size of the returned Data-Buffer.\r
@param Data Point to return Data-Buffer.\r
\r
variable name data. When the entire variable list has been returned, the error EFI_NOT_FOUND\r
is returned.\r
\r
- @param VariableNameSize As input, point to maxinum size of variable name.\r
- As output, point to actual size of varaible name.\r
+ @param VariableNameSize As input, point to maximum size of variable name.\r
+ As output, point to actual size of variable name.\r
@param VariableName As input, supplies the last VariableName that was returned by\r
GetNextVariableName().\r
As output, returns the name of variable. The name\r
Variables are stored by the firmware and may maintain their values across power cycles. Each vendor\r
may create and manage its own variables without the risk of name conflicts by using a unique VendorGuid.\r
\r
- @param VariableName the name of the vendor's variable, it's a\r
+ @param VariableName the name of the vendor's variable, as a\r
Null-Terminated Unicode String\r
@param VendorGuid Unify identifier for vendor.\r
@param Attributes Point to memory location to return the attributes of variable. If the point\r
/**\r
This service is a wrapper for the UEFI Runtime Service GetNextHighMonotonicCount().\r
\r
- The platform¡¯s monotonic counter is comprised of two 32-bit quantities: the high 32 bits and\r
+ The platform's monotonic counter is comprised of two 32-bit quantities: the high 32 bits and\r
the low 32 bits. During boot service time the low 32-bit value is volatile: it is reset to zero\r
on every system reset and is increased by 1 on every call to GetNextMonotonicCount(). The high\r
32-bit value is nonvolatile and is increased by 1 whenever the system resets or whenever the low\r
Calling this interface with ResetType of EfiResetShutdown causes the system to enter a power state equivalent to the\r
ACPI G2/S5 or G3 states. If the system does not support this reset type, then when the system is rebooted, it should\r
exhibit the EfiResetCold attributes.\r
- The platform may optionally log the parmeters from any non-normal reset that occurs.\r
+ The platform may optionally log the parameters from any non-normal reset that occurs.\r
The ResetSystem() function does not return.\r
\r
@param ResetType The type of reset to perform.\r
Null-terminated Unicode string, optionally followed by additional binary data. The string is a\r
description that the caller may use to further indicate the reason for the system reset. ResetData\r
is only valid if ResetStatus is something other then EFI_SUCCESS. This pointer must be a physical\r
- address. For a ResetType of EfiRestUpdate the data buffer also starts with a Null-terminated string\r
- that is followed by a physical VOID * to an EFI_CAPSULE_HEADER.\r
-\r
+ address. For a ResetType of EfiResetPlatformSpecific the data buffer also starts with a Null-terminated\r
+ string that is followed by an EFI_GUID that describes the specific type of reset to perform.\r
**/\r
VOID\r
EFIAPI\r
);\r
\r
/**\r
- This service is a wrapper for the UEFI Runtime Service ConvertPointer(). \r
+ This service is a wrapper for the UEFI Runtime Service ConvertPointer().\r
\r
The ConvertPointer() function is used by an EFI component during the SetVirtualAddressMap() operation.\r
ConvertPointer()must be called using physical address pointers during the execution of SetVirtualAddressMap().\r
/**\r
Determines the new virtual address that is to be used on subsequent memory accesses.\r
\r
- For IA32, X64, and EBC, this service is a wrapper for the UEFI Runtime Service\r
- ConvertPointer(). See the UEFI Specification for details. \r
+ For IA32, x64, and EBC, this service is a wrapper for the UEFI Runtime Service\r
+ ConvertPointer(). See the UEFI Specification for details.\r
For IPF, this function interprets Address as a pointer to an EFI_PLABEL structure\r
and both the EntryPoint and GP fields of an EFI_PLABEL are converted from physical\r
to virtiual addressing. Since IPF allows the GP to point to an address outside\r
This service is a wrapper for the UEFI Runtime Service SetVirtualAddressMap().\r
\r
The SetVirtualAddressMap() function is used by the OS loader. The function can only be called\r
- at runtime, and is called by the owner of the system¡¯s memory map. I.e., the component which\r
+ at runtime, and is called by the owner of the system's memory map. I.e., the component which\r
called ExitBootServices(). All events of type EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGE must be signaled\r
before SetVirtualAddressMap() returns.\r
\r
@param DebugDisposition Supplies type information for the pointer being converted.\r
@param ListHead Head of linked list to convert.\r
\r
- @retval EFI_SUCCESS Success to execute the function.\r
- @retval !EFI_SUCCESS Failed to e3xecute the function.\r
+ @retval EFI_SUCCESS Successfully executed the function.\r
+ @retval !EFI_SUCCESS Failed to execute the function.\r
\r
**/\r
EFI_STATUS\r
CapsuleHeaderArray. This parameter is only referenced if\r
the capsules are defined to persist across system reset.\r
\r
- @retval EFI_SUCCESS Valid capsule was passed. If CAPSULE_FLAGS_PERSIT_ACROSS_RESET is not set,\r
+ @retval EFI_SUCCESS A valid capsule was passed. If CAPSULE_FLAGS_PERSIT_ACROSS_RESET is not set,\r
the capsule has been successfully processed by the firmware.\r
- @retval EFI_INVALID_PARAMETER CapsuleSize or HeaderSize is NULL.\r
+ @retval EFI_INVALID_PARAMETER CapsuleSize is NULL, or an incompatible set of flags were\r
+ set in the capsule header.\r
@retval EFI_INVALID_PARAMETER CapsuleCount is 0\r
@retval EFI_DEVICE_ERROR The capsule update was started, but failed due to a device error.\r
@retval EFI_UNSUPPORTED The capsule type is not supported on this platform.\r
Undefined on input.\r
@param ResetType Returns the type of reset required for the capsule update.\r
\r
- @retval EFI_SUCCESS Valid answer returned.\r
+ @retval EFI_SUCCESS A valid answer was returned.\r
@retval EFI_INVALID_PARAMETER MaximumCapsuleSize is NULL.\r
@retval EFI_UNSUPPORTED The capsule type is not supported on this platform, and\r
MaximumCapsuleSize and ResetType are undefined.\r
@param RemainingVariableStorageSize\r
Returns the remaining size of the storage space\r
available for the EFI variables associated with the\r
- attributes specified..\r
+ attributes specified.\r
@param MaximumVariableSize Returns the maximum size of the individual EFI\r
variables associated with the attributes specified.\r
\r
- @retval EFI_SUCCESS Valid answer returned.\r
+ @retval EFI_SUCCESS A valid answer was returned.\r
@retval EFI_INVALID_PARAMETER An invalid combination of attribute bits was supplied.\r
@retval EFI_UNSUPPORTED EFI_UNSUPPORTED The attribute is not supported on this platform, and the\r
MaximumVariableStorageSize,\r
projects / mirror_edk2.git / blobdiff