]> git.proxmox.com Git - mirror_edk2.git/blobdiff - MdePkg/Include/Protocol/DeviceIo.h
MdePkg/ProcessorBind: add defines for page allocation granularity
[mirror_edk2.git] / MdePkg / Include / Protocol / DeviceIo.h
index 0d70632fd9188095d0be89e9afbdc1623a701266..99763d2bd773fe9a4ee600b29762ec4f59ed3afa 100644 (file)
@@ -1,11 +1,11 @@
 /** @file\r
-  Device IO protocol as defined in the EFI 1.0 specification.\r
+  Device IO protocol as defined in the EFI 1.10 specification.\r
 \r
   Device IO is used to abstract hardware access to devices. It includes\r
   memory mapped IO, IO, PCI Config space, and DMA.\r
 \r
-  Copyright (c) 2006, Intel Corporation                                                         \r
-  All rights reserved. This program and the accompanying materials                          \r
+  Copyright (c) 2006 - 2009, Intel Corporation. All rights reserved.<BR>\r
+  This program and the accompanying materials                          \r
   are licensed and made available under the terms and conditions of the BSD License         \r
   which accompanies this distribution.  The full text of the license may be found at        \r
   http://opensource.org/licenses/bsd-license.php                                            \r
@@ -13,8 +13,6 @@
   THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,                     \r
   WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.             \r
 \r
-  Module Name:  DeviceIo.h\r
-\r
 **/\r
 \r
 #ifndef __DEVICE_IO_H__\r
 \r
 typedef struct _EFI_DEVICE_IO_PROTOCOL EFI_DEVICE_IO_PROTOCOL;\r
 \r
+///\r
+/// Protocol GUID name defined in EFI1.1.\r
+/// \r
+#define DEVICE_IO_PROTOCOL  EFI_DEVICE_IO_PROTOCOL_GUID\r
+\r
+///\r
+/// Protocol defined in EFI1.1.\r
+/// \r
+typedef EFI_DEVICE_IO_PROTOCOL  EFI_DEVICE_IO_INTERFACE;\r
+\r
+///\r
+/// Device IO Access Width \r
+///\r
 typedef enum {\r
-  IO_UINT8,\r
-  IO_UINT16,\r
-  IO_UINT32,\r
-  IO_UINT64,\r
-  MMIO_COPY_UINT8,\r
-  MMIO_COPY_UINT16,\r
-  MMIO_COPY_UINT32,\r
-  MMIO_COPY_UINT64\r
+  IO_UINT8  = 0,\r
+  IO_UINT16 = 1,\r
+  IO_UINT32 = 2,\r
+  IO_UINT64 = 3,\r
+  //\r
+  // Below enumerations are added in "Extensible Firmware Interface Specification, \r
+  // Version 1.10, Specification Update, Version 001".\r
+  //\r
+  MMIO_COPY_UINT8  = 4,\r
+  MMIO_COPY_UINT16 = 5,\r
+  MMIO_COPY_UINT32 = 6,\r
+  MMIO_COPY_UINT64 = 7\r
 } EFI_IO_WIDTH;\r
 \r
 /**                                                                 \r
@@ -46,8 +61,11 @@ typedef enum {
   @param  Address               The base address of the I/O operations. \r
   @param  Count                 The number of I/O operations to perform.\r
   @param  Buffer                For read operations, the destination buffer to store the results. For write\r
-                                operations, the source buffer to write data from.                \r
-  \r
+                                operations, the source buffer to write data from. If\r
+                                Width is MMIO_COPY_UINT8, MMIO_COPY_UINT16,\r
+                                MMIO_COPY_UINT32, or MMIO_COPY_UINT64, then\r
+                                Buffer is interpreted as a base address of an I/O operation such as Address. \r
+\r
   @retval EFI_SUCCESS           The data was read from or written to the device.\r
   @retval EFI_OUT_OF_RESOURCES  The request could not be completed due to a lack of resources.      \r
   @retval EFI_INVALID_PARAMETER Width is invalid.\r
@@ -55,7 +73,7 @@ typedef enum {
 **/\r
 typedef\r
 EFI_STATUS\r
-(EFIAPI *EFI_DEVICE_IO) (\r
+(EFIAPI *EFI_DEVICE_IO)(\r
   IN EFI_DEVICE_IO_PROTOCOL         *This,\r
   IN EFI_IO_WIDTH                   Width,\r
   IN UINT64                         Address,\r
@@ -76,7 +94,7 @@ typedef struct {
                                 is going to be returned.  \r
   @param  PciDevicePath         A pointer to the pointer for the EFI Device Path for PciAddress.\r
                                 Memory for the Device Path is allocated from the pool.          \r
-  \r
+\r
   @retval EFI_SUCCESS           The PciDevicePath returns a pointer to a valid EFI Device Path.\r
   @retval EFI_OUT_OF_RESOURCES  The request could not be completed due to a lack of resources.      \r
   @retval EFI_UNSUPPORTED       The PciAddress does not map to a valid EFI Device Path.\r
@@ -84,15 +102,29 @@ typedef struct {
 **/\r
 typedef\r
 EFI_STATUS\r
-(EFIAPI *EFI_PCI_DEVICE_PATH) (\r
+(EFIAPI *EFI_PCI_DEVICE_PATH)(\r
   IN EFI_DEVICE_IO_PROTOCOL           *This,\r
   IN UINT64                           PciAddress,\r
   IN OUT EFI_DEVICE_PATH_PROTOCOL     **PciDevicePath\r
   );\r
 \r
 typedef enum {\r
+  ///\r
+  /// A read operation from system memory by a bus master.\r
+  ///\r
   EfiBusMasterRead,\r
+\r
+  ///\r
+  /// A write operation to system memory by a bus master.\r
+  ///\r
   EfiBusMasterWrite,\r
+  \r
+  ///\r
+  /// Provides both read and write access to system memory\r
+  /// by both the processor and a bus master. The buffer is\r
+  /// coherent from both the processor's and the bus master's\r
+  /// point of view.\r
+  ///\r
   EfiBusMasterCommonBuffer\r
 } EFI_IO_OPERATION_TYPE;\r
 \r
@@ -102,11 +134,12 @@ typedef enum {
   @param  This                  A pointer to the EFI_DEVICE_IO_INTERFACE instance.\r
   @param  Operation             Indicates if the bus master is going to read or write to system memory.\r
   @param  HostAddress           The system memory address to map to the device.\r
-  @param  NumberOfBytes         On input the number of bytes to map.\r
+  @param  NumberOfBytes         On input, the number of bytes to map.\r
+                                On output, the number of bytes that were mapped.\r
   @param  DeviceAddress         The resulting map address for the bus master device to use to access the\r
                                 hosts HostAddress.\r
   @param  Mapping               A resulting value to pass to Unmap().\r
-  \r
+\r
   @retval EFI_SUCCESS           The range was mapped for the returned NumberOfBytes.\r
   @retval EFI_OUT_OF_RESOURCES  The request could not be completed due to a lack of resources.      \r
   @retval EFI_UNSUPPORTED       The HostAddress cannot be mapped as a common buffer.\r
@@ -116,7 +149,7 @@ typedef enum {
 **/\r
 typedef\r
 EFI_STATUS\r
-(EFIAPI *EFI_IO_MAP) (\r
+(EFIAPI *EFI_IO_MAP)(\r
   IN EFI_DEVICE_IO_PROTOCOL           *This,\r
   IN EFI_IO_OPERATION_TYPE            Operation,\r
   IN EFI_PHYSICAL_ADDRESS             *HostAddress,\r
@@ -130,14 +163,14 @@ EFI_STATUS
     \r
   @param  This                  A pointer to the EFI_DEVICE_IO_INTERFACE instance.\r
   @param  Mapping               A resulting value to pass to Unmap().\r
-  \r
+\r
   @retval EFI_SUCCESS           The range was mapped for the returned NumberOfBytes.\r
   @retval EFI_DEVICE_ERROR      The system hardware could not map the requested address.\r
                                    \r
 **/\r
 typedef\r
 EFI_STATUS\r
-(EFIAPI *EFI_IO_UNMAP) (\r
+(EFIAPI *EFI_IO_UNMAP)(\r
   IN EFI_DEVICE_IO_PROTOCOL           *This,\r
   IN VOID                             *Mapping\r
   );\r
@@ -151,7 +184,7 @@ EFI_STATUS
                                 EfiRuntimeServicesData.\r
   @param  Pages                 The number of pages to allocate.\r
   @param  HostAddress           A pointer to store the base address of the allocated range.                                \r
-  \r
+\r
   @retval EFI_SUCCESS           The requested memory pages were allocated.\r
   @retval EFI_OUT_OF_RESOURCES  The memory pages could not be allocated.\r
   @retval EFI_INVALID_PARAMETER The requested memory type is invalid.\r
@@ -161,7 +194,7 @@ EFI_STATUS
 **/\r
 typedef\r
 EFI_STATUS\r
-(EFIAPI *EFI_IO_ALLOCATE_BUFFER) (\r
+(EFIAPI *EFI_IO_ALLOCATE_BUFFER)(\r
   IN EFI_DEVICE_IO_PROTOCOL           *This,\r
   IN EFI_ALLOCATE_TYPE                Type,\r
   IN EFI_MEMORY_TYPE                  MemoryType,\r
@@ -173,14 +206,14 @@ EFI_STATUS
   Flushes any posted write data to the device.\r
     \r
   @param  This                  A pointer to the EFI_DEVICE_IO_INTERFACE instance.\r
-  \r
+\r
   @retval EFI_SUCCESS           The buffers were flushed.\r
   @retval EFI_DEVICE_ERROR      The buffers were not flushed due to a hardware error.                                 \r
   \r
 **/\r
 typedef\r
 EFI_STATUS\r
-(EFIAPI *EFI_IO_FLUSH) (\r
+(EFIAPI *EFI_IO_FLUSH)(\r
   IN EFI_DEVICE_IO_PROTOCOL  *This\r
   );\r
 \r
@@ -190,7 +223,7 @@ EFI_STATUS
   @param  This                  A pointer to the EFI_DEVICE_IO_INTERFACE instance.  \r
   @param  Pages                 The number of pages to free.\r
   @param  HostAddress           The base address of the range to free.\r
-  \r
+\r
   @retval EFI_SUCCESS           The requested memory pages were allocated.\r
   @retval EFI_NOT_FOUND         The requested memory pages were not allocated with\r
                                 AllocateBuffer().  \r
@@ -199,15 +232,28 @@ EFI_STATUS
 **/\r
 typedef\r
 EFI_STATUS\r
-(EFIAPI *EFI_IO_FREE_BUFFER) (\r
+(EFIAPI *EFI_IO_FREE_BUFFER)(\r
   IN EFI_DEVICE_IO_PROTOCOL           *This,\r
   IN UINTN                            Pages,\r
   IN EFI_PHYSICAL_ADDRESS             HostAddress\r
   );\r
 \r
+///\r
+/// This protocol provides the basic Memory, I/O, and PCI interfaces that \r
+/// are used to abstract accesses to devices.\r
+///\r
 struct _EFI_DEVICE_IO_PROTOCOL {\r
+  ///\r
+  /// Allows reads and writes to memory mapped I/O space.\r
+  ///\r
   EFI_IO_ACCESS           Mem;\r
+  ///\r
+  /// Allows reads and writes to I/O space.\r
+  ///\r
   EFI_IO_ACCESS           Io;\r
+  ///\r
+  /// Allows reads and writes to PCI configuration space.\r
+  ///\r
   EFI_IO_ACCESS           Pci;\r
   EFI_IO_MAP              Map;\r
   EFI_PCI_DEVICE_PATH     PciDevicePath;\r