/** @file\r
- EFI ControllerHandle Driver Protocol\r
+ UEFI DriverBinding Protocol is defined in UEFI specification.\r
+ \r
+ This protocol is produced by every driver that follows the UEFI Driver Model, \r
+ and it is the central component that allows drivers and controllers to be managed.\r
\r
- Copyright (c) 2006, Intel Corporation \r
+ Copyright (c) 2006 - 2008, Intel Corporation \r
All rights reserved. This program and the accompanying materials \r
are licensed and made available under the terms and conditions of the BSD License \r
which accompanies this distribution. The full text of the license may be found at \r
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, \r
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. \r
\r
- Module Name: DriverBinding.h\r
-\r
**/\r
\r
#ifndef __EFI_DRIVER_BINDING_H__\r
#define __EFI_DRIVER_BINDING_H__\r
\r
-//\r
-// Global ID for the ControllerHandle Driver Protocol\r
-//\r
+#include <Protocol/DevicePath.h>\r
+///\r
+/// Global ID for the ControllerHandle Driver Protocol\r
+///\r
#define EFI_DRIVER_BINDING_PROTOCOL_GUID \\r
{ \\r
0x18a031ab, 0xb443, 0x4d1a, {0xa5, 0xc0, 0xc, 0x9, 0x26, 0x1e, 0x9f, 0x71 } \\r
typedef struct _EFI_DRIVER_BINDING_PROTOCOL EFI_DRIVER_BINDING_PROTOCOL;\r
\r
/**\r
- Test to see if this driver supports ControllerHandle. \r
-\r
- @param This Protocol instance pointer.\r
- @param ControllerHandle Handle of device to test\r
- @param RemainingDevicePath Optional parameter use to pick a specific child\r
- device to start.\r
-\r
- @retval EFI_SUCCESS This driver supports this device\r
- @retval EFI_ALREADY_STARTED This driver is already running on this device\r
- @retval other This driver does not support this device\r
-\r
+ Tests to see if this driver supports a given controller. If a child device is provided, \r
+ it further tests to see if this driver supports creating a handle for the specified child device.\r
+\r
+ @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.\r
+ @param[in] ControllerHandle The handle of the controller to test. This handle \r
+ must support a protocol interface that supplies \r
+ an I/O abstraction to the driver.\r
+ @param[in] RemainingDevicePath A pointer to the remaining portion of a device path. \r
+ This parameter is ignored by device drivers, and is optional for bus drivers.\r
+\r
+\r
+ @retval EFI_SUCCESS The device specified by ControllerHandle and\r
+ RemainingDevicePath is supported by the driver specified by This.\r
+ @retval EFI_ALREADY_STARTED The device specified by ControllerHandle and\r
+ RemainingDevicePath is already being managed by the driver\r
+ specified by This.\r
+ @retval EFI_ACCESS_DENIED The device specified by ControllerHandle and\r
+ RemainingDevicePath is already being managed by a different\r
+ driver or an application that requires exclusive acces.\r
+ Currently not implemented.\r
+ @retval EFI_UNSUPPORTED The device specified by ControllerHandle and\r
+ RemainingDevicePath is not supported by the driver specified by This.\r
**/\r
typedef\r
EFI_STATUS\r
-(EFIAPI *EFI_DRIVER_BINDING_SUPPORTED) (\r
+(EFIAPI *EFI_DRIVER_BINDING_SUPPORTED)(\r
IN EFI_DRIVER_BINDING_PROTOCOL *This,\r
IN EFI_HANDLE ControllerHandle,\r
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath OPTIONAL\r
- )\r
-;\r
+ );\r
\r
/**\r
- Start this driver on ControllerHandle.\r
-\r
- @param This Protocol instance pointer.\r
- @param ControllerHandle Handle of device to bind driver to\r
- @param RemainingDevicePath Optional parameter use to pick a specific child\r
- device to start.\r
-\r
- @retval EFI_SUCCESS This driver is added to ControllerHandle\r
- @retval EFI_ALREADY_STARTED This driver is already running on ControllerHandle\r
- @retval other This driver does not support this device\r
-\r
+ Start this driver on ControllerHandle. The Start() function is designed to be \r
+ invoked from the EFI boot service ConnectController(). As a result, much of \r
+ the error checking on the parameters to Start() has been moved into this \r
+ common boot service. It is legal to call Start() from other locations, \r
+ but the following calling restrictions must be followed or the system behavior will not be deterministic.\r
+ 1. ControllerHandle must be a valid EFI_HANDLE.\r
+ 2. If RemainingDevicePath is not NULL, then it must be a pointer to a naturally aligned\r
+ EFI_DEVICE_PATH_PROTOCOL.\r
+ 3. Prior to calling Start(), the Supported() function for the driver specified by This must\r
+ have been called with the same calling parameters, and Supported() must have returned EFI_SUCCESS. \r
+\r
+ @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.\r
+ @param[in] ControllerHandle The handle of the controller to start. This handle \r
+ must support a protocol interface that supplies \r
+ an I/O abstraction to the driver.\r
+ @param[in] RemainingDevicePath A pointer to the remaining portion of a device path. \r
+ This parameter is ignored by device drivers, and is optional for bus drivers.\r
+\r
+ @retval EFI_SUCCESS The device was started.\r
+ @retval EFI_DEVICE_ERROR The device could not be started due to a device error.Currently not implemented.\r
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.\r
+ @retval Others The driver failded to start the device.\r
**/\r
typedef\r
EFI_STATUS\r
-(EFIAPI *EFI_DRIVER_BINDING_START) (\r
+(EFIAPI *EFI_DRIVER_BINDING_START)(\r
IN EFI_DRIVER_BINDING_PROTOCOL *This,\r
IN EFI_HANDLE ControllerHandle,\r
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath OPTIONAL\r
- )\r
-;\r
+ );\r
\r
/**\r
- Stop this driver on ControllerHandle.\r
-\r
- @param This Protocol instance pointer.\r
- @param ControllerHandle Handle of device to stop driver on\r
- @param NumberOfChildren Number of Handles in ChildHandleBuffer. If number of\r
- children is zero stop the entire bus driver.\r
- @param ChildHandleBuffer List of Child Handles to Stop.\r
-\r
- @retval EFI_SUCCESS This driver is removed ControllerHandle\r
- @retval other This driver was not removed from this device\r
-\r
+ Stop this driver on ControllerHandle. \r
+ \r
+ Release the control of this controller and remove the IScsi functions. The Stop()\r
+ function is designed to be invoked from the EFI boot service DisconnectController(). \r
+ As a result, much of the error checking on the parameters to Stop() has been moved \r
+ into this common boot service. It is legal to call Stop() from other locations, \r
+ but the following calling restrictions must be followed or the system behavior will not be deterministic.\r
+ 1. ControllerHandle must be a valid EFI_HANDLE that was used on a previous call to this\r
+ same driver's Start() function.\r
+ 2. The first NumberOfChildren handles of ChildHandleBuffer must all be a valid\r
+ EFI_HANDLE. In addition, all of these handles must have been created in this driver's\r
+ Start() function, and the Start() function must have called OpenProtocol() on\r
+ ControllerHandle with an Attribute of EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER.\r
+ \r
+ @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.\r
+ @param[in] ControllerHandle A handle to the device being stopped. The handle must \r
+ support a bus specific I/O protocol for the driver \r
+ to use to stop the device.\r
+ @param[in] NumberOfChildren The number of child device handles in ChildHandleBuffer.Not used.\r
+ @param[in] ChildHandleBuffer An array of child handles to be freed. May be NULL \r
+ if NumberOfChildren is 0.Not used.\r
+\r
+ @retval EFI_SUCCESS The device was stopped.\r
+ @retval EFI_DEVICE_ERROR The device could not be stopped due to a device error.\r
**/\r
typedef\r
EFI_STATUS\r
-(EFIAPI *EFI_DRIVER_BINDING_STOP) (\r
+(EFIAPI *EFI_DRIVER_BINDING_STOP)(\r
IN EFI_DRIVER_BINDING_PROTOCOL *This,\r
IN EFI_HANDLE ControllerHandle,\r
IN UINTN NumberOfChildren,\r
IN EFI_HANDLE *ChildHandleBuffer OPTIONAL\r
- )\r
-;\r
+ );\r
\r
-//\r
-// Interface structure for the ControllerHandle Driver Protocol\r
-//\r
+///\r
+/// This protocol provides the services required to determine if a driver supports a given controller. \r
+/// If a controller is supported, then it also provides routines to start and stop the controller.\r
+///\r
struct _EFI_DRIVER_BINDING_PROTOCOL {\r
EFI_DRIVER_BINDING_SUPPORTED Supported;\r
EFI_DRIVER_BINDING_START Start;\r
EFI_DRIVER_BINDING_STOP Stop;\r
+ \r
+ ///\r
+ /// The version number of the UEFI driver that produced the\r
+ /// EFI_DRIVER_BINDING_PROTOCOL. This field is used by\r
+ /// the EFI boot service ConnectController() to determine\r
+ /// the order that driver's Supported() service will be used when\r
+ /// a controller needs to be started. EFI Driver Binding Protocol\r
+ /// instances with higher Version values will be used before ones\r
+ /// with lower Version values. The Version values of 0x0-\r
+ /// 0x0f and 0xfffffff0-0xffffffff are reserved for\r
+ /// platform/OEM specific drivers. The Version values of 0x10-\r
+ /// 0xffffffef are reserved for IHV-developed drivers.\r
+ ///\r
UINT32 Version;\r
+ \r
+ ///\r
+ /// The image handle of the UEFI driver that produced this instance\r
+ /// of the EFI_DRIVER_BINDING_PROTOCOL.\r
+ ///\r
EFI_HANDLE ImageHandle;\r
+ \r
+ ///\r
+ /// The handle on which this instance of the\r
+ /// EFI_DRIVER_BINDING_PROTOCOL is installed. In most\r
+ /// cases, this is the same handle as ImageHandle. However, for\r
+ /// UEFI drivers that produce more than one instance of the\r
+ /// EFI_DRIVER_BINDING_PROTOCOL, this value may not be\r
+ /// the same as ImageHandle. \r
+ ///\r
EFI_HANDLE DriverBindingHandle;\r
};\r
\r
projects / mirror_edk2.git / blobdiff