/** @file\r
- EFI ControllerHandle Driver Protocol\r
-\r
- Copyright (c) 2006, Intel Corporation \r
- All rights reserved. This program and the accompanying materials \r
- are licensed and made available under the terms and conditions of the BSD License \r
- which accompanies this distribution. The full text of the license may be found at \r
- http://opensource.org/licenses/bsd-license.php \r
-\r
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, \r
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. \r
-\r
- Module Name: DriverBinding.h\r
+ UEFI DriverBinding Protocol is defined in UEFI specification.\r
+ \r
+ This protocol is produced by every driver that follows the UEFI Driver Model, \r
+ and it is the central component that allows drivers and controllers to be managed.\r
+\r
+Copyright (c) 2006 - 2010, Intel Corporation. All rights reserved<BR>\r
+This program and the accompanying materials are licensed and made available under \r
+the terms and conditions of the BSD License that accompanies this distribution. \r
+The full text of the license may be found at\r
+http://opensource.org/licenses/bsd-license.php. \r
+ \r
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, \r
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. \r
\r
**/\r
\r
#ifndef __EFI_DRIVER_BINDING_H__\r
#define __EFI_DRIVER_BINDING_H__\r
\r
-#include <Protocol/DevicePath.h>\r
-//\r
-// Global ID for the ControllerHandle Driver Protocol\r
-//\r
+///\r
+/// The global ID for the ControllerHandle Driver Protocol.\r
+///\r
#define EFI_DRIVER_BINDING_PROTOCOL_GUID \\r
{ \\r
0x18a031ab, 0xb443, 0x4d1a, {0xa5, 0xc0, 0xc, 0x9, 0x26, 0x1e, 0x9f, 0x71 } \\r
typedef struct _EFI_DRIVER_BINDING_PROTOCOL EFI_DRIVER_BINDING_PROTOCOL;\r
\r
/**\r
- Test to see if this driver supports ControllerHandle. \r
-\r
- @param This Protocol instance pointer.\r
- @param ControllerHandle Handle of device to test\r
- @param RemainingDevicePath Optional parameter use to pick a specific child\r
- device to start.\r
-\r
- @retval EFI_SUCCESS This driver supports this device\r
- @retval EFI_ALREADY_STARTED This driver is already running on this device\r
- @retval other This driver does not support this device\r
-\r
+ Tests to see if this driver supports a given controller. If a child device is provided, \r
+ it further tests to see if this driver supports creating a handle for the specified child device.\r
+\r
+ This function checks to see if the driver specified by This supports the device specified by \r
+ ControllerHandle. Drivers will typically use the device path attached to \r
+ ControllerHandle and/or the services from the bus I/O abstraction attached to \r
+ ControllerHandle to determine if the driver supports ControllerHandle. This function \r
+ may be called many times during platform initialization. In order to reduce boot times, the tests \r
+ performed by this function must be very small, and take as little time as possible to execute. This \r
+ function must not change the state of any hardware devices, and this function must be aware that the \r
+ device specified by ControllerHandle may already be managed by the same driver or a \r
+ different driver. This function must match its calls to AllocatePages() with FreePages(), \r
+ AllocatePool() with FreePool(), and OpenProtocol() with CloseProtocol(). \r
+ Because ControllerHandle may have been previously started by the same driver, if a protocol is \r
+ already in the opened state, then it must not be closed with CloseProtocol(). This is required \r
+ to guarantee the state of ControllerHandle is not modified by this function.\r
+\r
+ @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.\r
+ @param[in] ControllerHandle The handle of the controller to test. This handle \r
+ must support a protocol interface that supplies \r
+ an I/O abstraction to the driver.\r
+ @param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This \r
+ parameter is ignored by device drivers, and is optional for bus \r
+ drivers. For bus drivers, if this parameter is not NULL, then \r
+ the bus driver must determine if the bus controller specified \r
+ by ControllerHandle and the child controller specified \r
+ by RemainingDevicePath are both supported by this \r
+ bus driver.\r
+\r
+ @retval EFI_SUCCESS The device specified by ControllerHandle and\r
+ RemainingDevicePath is supported by the driver specified by This.\r
+ @retval EFI_ALREADY_STARTED The device specified by ControllerHandle and\r
+ RemainingDevicePath is already being managed by the driver\r
+ specified by This.\r
+ @retval EFI_ACCESS_DENIED The device specified by ControllerHandle and\r
+ RemainingDevicePath is already being managed by a different\r
+ driver or an application that requires exclusive access.\r
+ Currently not implemented.\r
+ @retval EFI_UNSUPPORTED The device specified by ControllerHandle and\r
+ RemainingDevicePath is not supported by the driver specified by This.\r
**/\r
typedef\r
EFI_STATUS\r
-(EFIAPI *EFI_DRIVER_BINDING_SUPPORTED) (\r
+(EFIAPI *EFI_DRIVER_BINDING_SUPPORTED)(\r
IN EFI_DRIVER_BINDING_PROTOCOL *This,\r
IN EFI_HANDLE ControllerHandle,\r
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath OPTIONAL\r
- )\r
-;\r
+ );\r
\r
/**\r
- Start this driver on ControllerHandle.\r
-\r
- @param This Protocol instance pointer.\r
- @param ControllerHandle Handle of device to bind driver to\r
- @param RemainingDevicePath Optional parameter use to pick a specific child\r
- device to start.\r
-\r
- @retval EFI_SUCCESS This driver is added to ControllerHandle\r
- @retval EFI_ALREADY_STARTED This driver is already running on ControllerHandle\r
- @retval other This driver does not support this device\r
+ Starts a device controller or a bus controller.\r
+\r
+ The Start() function is designed to be invoked from the EFI boot service ConnectController().\r
+ As a result, much of the error checking on the parameters to Start() has been moved into this \r
+ common boot service. It is legal to call Start() from other locations, \r
+ but the following calling restrictions must be followed, or the system behavior will not be deterministic.\r
+ 1. ControllerHandle must be a valid EFI_HANDLE.\r
+ 2. If RemainingDevicePath is not NULL, then it must be a pointer to a naturally aligned\r
+ EFI_DEVICE_PATH_PROTOCOL.\r
+ 3. Prior to calling Start(), the Supported() function for the driver specified by This must\r
+ have been called with the same calling parameters, and Supported() must have returned EFI_SUCCESS. \r
+\r
+ @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.\r
+ @param[in] ControllerHandle The handle of the controller to start. This handle \r
+ must support a protocol interface that supplies \r
+ an I/O abstraction to the driver.\r
+ @param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This \r
+ parameter is ignored by device drivers, and is optional for bus \r
+ drivers. For a bus driver, if this parameter is NULL, then handles \r
+ for all the children of Controller are created by this driver. \r
+ If this parameter is not NULL and the first Device Path Node is \r
+ not the End of Device Path Node, then only the handle for the \r
+ child device specified by the first Device Path Node of \r
+ RemainingDevicePath is created by this driver.\r
+ If the first Device Path Node of RemainingDevicePath is \r
+ the End of Device Path Node, no child handle is created by this\r
+ driver.\r
+\r
+ @retval EFI_SUCCESS The device was started.\r
+ @retval EFI_DEVICE_ERROR The device could not be started due to a device error.Currently not implemented.\r
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.\r
+ @retval Others The driver failded to start the device.\r
\r
**/\r
typedef\r
EFI_STATUS\r
-(EFIAPI *EFI_DRIVER_BINDING_START) (\r
+(EFIAPI *EFI_DRIVER_BINDING_START)(\r
IN EFI_DRIVER_BINDING_PROTOCOL *This,\r
IN EFI_HANDLE ControllerHandle,\r
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath OPTIONAL\r
- )\r
-;\r
+ );\r
\r
/**\r
- Stop this driver on ControllerHandle.\r
-\r
- @param This Protocol instance pointer.\r
- @param ControllerHandle Handle of device to stop driver on\r
- @param NumberOfChildren Number of Handles in ChildHandleBuffer. If number of\r
- children is zero stop the entire bus driver.\r
- @param ChildHandleBuffer List of Child Handles to Stop.\r
-\r
- @retval EFI_SUCCESS This driver is removed ControllerHandle\r
- @retval other This driver was not removed from this device\r
+ Stops a device controller or a bus controller.\r
+ \r
+ The Stop() function is designed to be invoked from the EFI boot service DisconnectController(). \r
+ As a result, much of the error checking on the parameters to Stop() has been moved \r
+ into this common boot service. It is legal to call Stop() from other locations, \r
+ but the following calling restrictions must be followed, or the system behavior will not be deterministic.\r
+ 1. ControllerHandle must be a valid EFI_HANDLE that was used on a previous call to this\r
+ same driver's Start() function.\r
+ 2. The first NumberOfChildren handles of ChildHandleBuffer must all be a valid\r
+ EFI_HANDLE. In addition, all of these handles must have been created in this driver's\r
+ Start() function, and the Start() function must have called OpenProtocol() on\r
+ ControllerHandle with an Attribute of EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER.\r
+ \r
+ @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.\r
+ @param[in] ControllerHandle A handle to the device being stopped. The handle must \r
+ support a bus specific I/O protocol for the driver \r
+ to use to stop the device.\r
+ @param[in] NumberOfChildren The number of child device handles in ChildHandleBuffer.\r
+ @param[in] ChildHandleBuffer An array of child handles to be freed. May be NULL \r
+ if NumberOfChildren is 0.\r
+\r
+ @retval EFI_SUCCESS The device was stopped.\r
+ @retval EFI_DEVICE_ERROR The device could not be stopped due to a device error.\r
\r
**/\r
typedef\r
EFI_STATUS\r
-(EFIAPI *EFI_DRIVER_BINDING_STOP) (\r
+(EFIAPI *EFI_DRIVER_BINDING_STOP)(\r
IN EFI_DRIVER_BINDING_PROTOCOL *This,\r
IN EFI_HANDLE ControllerHandle,\r
IN UINTN NumberOfChildren,\r
IN EFI_HANDLE *ChildHandleBuffer OPTIONAL\r
- )\r
-;\r
+ );\r
\r
-//\r
-// Interface structure for the ControllerHandle Driver Protocol\r
-//\r
+///\r
+/// This protocol provides the services required to determine if a driver supports a given controller. \r
+/// If a controller is supported, then it also provides routines to start and stop the controller.\r
+///\r
struct _EFI_DRIVER_BINDING_PROTOCOL {\r
EFI_DRIVER_BINDING_SUPPORTED Supported;\r
EFI_DRIVER_BINDING_START Start;\r
EFI_DRIVER_BINDING_STOP Stop;\r
+ \r
+ ///\r
+ /// The version number of the UEFI driver that produced the\r
+ /// EFI_DRIVER_BINDING_PROTOCOL. This field is used by\r
+ /// the EFI boot service ConnectController() to determine\r
+ /// the order that driver's Supported() service will be used when\r
+ /// a controller needs to be started. EFI Driver Binding Protocol\r
+ /// instances with higher Version values will be used before ones\r
+ /// with lower Version values. The Version values of 0x0-\r
+ /// 0x0f and 0xfffffff0-0xffffffff are reserved for\r
+ /// platform/OEM specific drivers. The Version values of 0x10-\r
+ /// 0xffffffef are reserved for IHV-developed drivers.\r
+ ///\r
UINT32 Version;\r
+ \r
+ ///\r
+ /// The image handle of the UEFI driver that produced this instance\r
+ /// of the EFI_DRIVER_BINDING_PROTOCOL.\r
+ ///\r
EFI_HANDLE ImageHandle;\r
+ \r
+ ///\r
+ /// The handle on which this instance of the\r
+ /// EFI_DRIVER_BINDING_PROTOCOL is installed. In most\r
+ /// cases, this is the same handle as ImageHandle. However, for\r
+ /// UEFI drivers that produce more than one instance of the\r
+ /// EFI_DRIVER_BINDING_PROTOCOL, this value may not be\r
+ /// the same as ImageHandle. \r
+ ///\r
EFI_HANDLE DriverBindingHandle;\r
};\r
\r
projects / mirror_edk2.git / blobdiff