\r
#define EFI_EXT_SCSI_PASS_THRU_PROTOCOL_GUID \\r
{ \\r
- 0x1d3de7f0, 0x0807, 0x424f, {0xaa, 0x69, 0x11, 0xa5, 0x4e, 0x19, 0xa4, 0x6f } \\r
+ 0x143b7632, 0xb81b, 0x4cb7, {0xab, 0xd3, 0xb6, 0x25, 0xa5, 0xb9, 0xbf, 0xfe } \\r
}\r
\r
typedef struct _EFI_EXT_SCSI_PASS_THRU_PROTOCOL EFI_EXT_SCSI_PASS_THRU_PROTOCOL;\r
#define EFI_EXT_SCSI_STATUS_TARGET_TASK_ABORTED 0x40\r
\r
typedef struct {\r
+ ///\r
+ /// The Target ID of the host adapter on the SCSI channel.\r
+ ///\r
UINT32 AdapterId;\r
+ ///\r
+ /// Additional information on the attributes of the SCSI channel.\r
+ ///\r
UINT32 Attributes;\r
+ ///\r
+ /// Supplies the alignment requirement for any buffer used in a data transfer.\r
+ ///\r
UINT32 IoAlign;\r
} EFI_EXT_SCSI_PASS_THRU_MODE;\r
\r
typedef struct {\r
+ ///\r
+ /// The timeout, in 100 ns units, to use for the execution of this SCSI\r
+ /// Request Packet. A Timeout value of 0 means that this function\r
+ /// will wait indefinitely for the SCSI Request Packet to execute. If\r
+ /// Timeout is greater than zero, then this function will return\r
+ /// EFI_TIMEOUT if the time required to execute the SCSI\r
+ /// Request Packet is greater than Timeout.\r
+ ///\r
UINT64 Timeout;\r
+ ///\r
+ /// A pointer to the data buffer to transfer between the SCSI\r
+ /// controller and the SCSI device for read and bidirectional commands.\r
+ ///\r
VOID *InDataBuffer;\r
+ ///\r
+ /// A pointer to the data buffer to transfer between the SCSI\r
+ /// controller and the SCSI device for write or bidirectional commands.\r
+ ///\r
VOID *OutDataBuffer;\r
+ ///\r
+ /// A pointer to the sense data that was generated by the execution of\r
+ /// the SCSI Request Packet.\r
+ ///\r
VOID *SenseData;\r
+ ///\r
+ /// A pointer to buffer that contains the Command Data Block to\r
+ /// send to the SCSI device specified by Target and Lun.\r
+ ///\r
VOID *Cdb;\r
+ ///\r
+ /// On Input, the size, in bytes, of InDataBuffer. On output, the\r
+ /// number of bytes transferred between the SCSI controller and the SCSI device.\r
+ ///\r
UINT32 InTransferLength;\r
+ ///\r
+ /// On Input, the size, in bytes of OutDataBuffer. On Output, the\r
+ /// Number of bytes transferred between SCSI Controller and the SCSI device.\r
+ ///\r
UINT32 OutTransferLength;\r
+ ///\r
+ /// The length, in bytes, of the buffer Cdb. The standard values are 6,\r
+ /// 10, 12, and 16, but other values are possible if a variable length CDB is used.\r
+ ///\r
UINT8 CdbLength;\r
+ ///\r
+ /// The direction of the data transfer. 0 for reads, 1 for writes. A\r
+ /// value of 2 is Reserved for Bi-Directional SCSI commands.\r
+ ///\r
UINT8 DataDirection;\r
+ ///\r
+ /// The status of the host adapter specified by This when the SCSI\r
+ /// Request Packet was executed on the target device.\r
+ ///\r
UINT8 HostAdapterStatus;\r
+ ///\r
+ /// The status returned by the device specified by Target and Lun\r
+ /// when the SCSI Request Packet was executed.\r
+ ///\r
UINT8 TargetStatus;\r
+ ///\r
+ /// On input, the length in bytes of the SenseData buffer. On\r
+ /// output, the number of bytes written to the SenseData buffer.\r
+ ///\r
UINT8 SenseDataLength;\r
} EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET;\r
\r
@param This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance.\r
@param Target The Target is an array of size TARGET_MAX_BYTES and it represents\r
the id of the SCSI device to send the SCSI Request Packet. Each\r
- transport driver may chose to utilize a subset of this size to suit the needs\r
+ transport driver may choose to utilize a subset of this size to suit the needs\r
of transport target representation. For example, a Fibre Channel driver\r
may use only 8 bytes (WWN) to represent an FC target.\r
@param Lun The LUN of the SCSI device to send the SCSI Request Packet.\r
IN UINT8 *Target,\r
IN UINT64 Lun,\r
IN OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath\r
- ); \r
+ );\r
\r
/**\r
Used to translate a device path node to a Target ID and LUN.\r
@retval EFI_SUCCESS The Target ID of the next SCSI device on the SCSI\r
channel was returned in Target.\r
@retval EFI_INVALID_PARAMETER Target or Lun is NULL.\r
- @retval EFI_TIMEOUT Target array is not all 0xF, and Target were not\r
+ @retval EFI_TIMEOUT Target array is not all 0xF, and Target was not\r
returned on a previous call to GetNextTarget().\r
@retval EFI_NOT_FOUND There are no more SCSI devices on this SCSI channel.\r
\r
IN OUT UINT8 **Target\r
); \r
\r
-/** \r
- @par Protocol Description:\r
- The EFI_EXT_SCSI_PASS_THRU_PROTOCOL provides information about a SCSI channel \r
- and the ability to send SCI Request Packets to any SCSI device attached to \r
- that SCSI channel. The information includes the Target ID of the host controller \r
- on the SCSI channel and the attributes of the SCSI channel.\r
-**/ \r
+///\r
+/// The EFI_EXT_SCSI_PASS_THRU_PROTOCOL provides information about a SCSI channel \r
+/// and the ability to send SCI Request Packets to any SCSI device attached to \r
+/// that SCSI channel. The information includes the Target ID of the host controller \r
+/// on the SCSI channel and the attributes of the SCSI channel.\r
+///\r
struct _EFI_EXT_SCSI_PASS_THRU_PROTOCOL {\r
+ ///\r
+ /// A pointer to the EFI_EXT_SCSI_PASS_THRU_MODE data for this SCSI channel.\r
+ ///\r
EFI_EXT_SCSI_PASS_THRU_MODE *Mode;\r
EFI_EXT_SCSI_PASS_THRU_PASSTHRU PassThru;\r
EFI_EXT_SCSI_PASS_THRU_GET_NEXT_TARGET_LUN GetNextTargetLun;\r
projects / mirror_edk2.git / blobdiff