/** @file\r
EFI_USB2_HC_PROTOCOL as defined in UEFI 2.0.\r
+ The USB Host Controller Protocol is used by code, typically USB bus drivers, \r
+ running in the EFI boot services environment, to perform data transactions over \r
+ a USB bus. In addition, it provides an abstraction for the root hub of the USB bus.\r
\r
Copyright (c) 2006, Intel Corporation\r
All rights reserved. This program and the accompanying materials\r
//\r
typedef struct _EFI_USB2_HC_PROTOCOL EFI_USB2_HC_PROTOCOL;\r
\r
+\r
+typedef struct {\r
+ UINT16 PortStatus;\r
+ UINT16 PortChangeStatus;\r
+} EFI_USB_PORT_STATUS;\r
+\r
+//\r
+// Constant value for Port Status & Port Change Status\r
+//\r
+#define USB_PORT_STAT_CONNECTION 0x0001\r
+#define USB_PORT_STAT_ENABLE 0x0002\r
+#define USB_PORT_STAT_SUSPEND 0x0004\r
+#define USB_PORT_STAT_OVERCURRENT 0x0008\r
+#define USB_PORT_STAT_RESET 0x0010\r
+#define USB_PORT_STAT_POWER 0x0100\r
+#define USB_PORT_STAT_LOW_SPEED 0x0200\r
+#define USB_PORT_STAT_HIGH_SPEED 0x0400\r
+#define USB_PORT_STAT_OWNER 0x0800\r
+\r
+#define USB_PORT_STAT_C_CONNECTION 0x0001\r
+#define USB_PORT_STAT_C_ENABLE 0x0002\r
+#define USB_PORT_STAT_C_SUSPEND 0x0004\r
+#define USB_PORT_STAT_C_OVERCURRENT 0x0008\r
+#define USB_PORT_STAT_C_RESET 0x0010\r
+\r
+\r
+//\r
+// Usb port features\r
+//\r
+typedef enum {\r
+ EfiUsbPortEnable = 1,\r
+ EfiUsbPortSuspend = 2,\r
+ EfiUsbPortReset = 4,\r
+ EfiUsbPortPower = 8,\r
+ EfiUsbPortOwner = 13,\r
+ EfiUsbPortConnectChange = 16,\r
+ EfiUsbPortEnableChange = 17,\r
+ EfiUsbPortSuspendChange = 18,\r
+ EfiUsbPortOverCurrentChange = 19,\r
+ EfiUsbPortResetChange = 20\r
+} EFI_USB_PORT_FEATURE;\r
+\r
+\r
#define EFI_USB_SPEED_FULL 0x0000 // 12 Mb/s, USB 1.1 OHCI and UHCI HC.\r
#define EFI_USB_SPEED_LOW 0x0001 // 1 Mb/s, USB 1.1 OHCI and UHCI HC.\r
#define EFI_USB_SPEED_HIGH 0x0002 // 480 Mb/s, USB 2.0 EHCI HC.\r
**/\r
typedef\r
EFI_STATUS\r
-(EFIAPI *EFI_USB2_HC_PROTOCOL_GET_CAPABILITY) (\r
+(EFIAPI *EFI_USB2_HC_PROTOCOL_GET_CAPABILITY)(\r
IN EFI_USB2_HC_PROTOCOL *This,\r
OUT UINT8 *MaxSpeed,\r
OUT UINT8 *PortNumber,\r
**/\r
typedef\r
EFI_STATUS\r
-(EFIAPI *EFI_USB2_HC_PROTOCOL_RESET) (\r
+(EFIAPI *EFI_USB2_HC_PROTOCOL_RESET)(\r
IN EFI_USB2_HC_PROTOCOL *This,\r
IN UINT16 Attributes\r
)\r
\r
/**\r
\r
- @param EfiUsbHcStateHalt The host controller is in halt\r
- state. No USB transactions can occur\r
- while in this state. The host\r
- controller can enter this state for\r
- three reasons: 1) After host\r
- controller hardware reset. 2)\r
- Explicitly set by software. 3)\r
- Triggered by a fatal error such as\r
- consistency check failure.\r
+ @param EfiUsbHcStateHalt The host controller is in halt\r
+ state. No USB transactions can occur\r
+ while in this state. The host\r
+ controller can enter this state for\r
+ three reasons: 1) After host\r
+ controller hardware reset. 2)\r
+ Explicitly set by software. 3)\r
+ Triggered by a fatal error such as\r
+ consistency check failure.\r
\r
\r
@param EfiUsbHcStateOperational The host controller is in an\r
USB bus traffic.\r
\r
\r
- @param EfiUsbHcStateSuspend The host controller is in the\r
- suspend state. No USB\r
- transactions can occur while in\r
- this state. The host controller\r
- enters this state for the\r
- following reasons: 1) Explicitly\r
- set by software. 2) Triggered\r
- when there is no bus traffic for\r
- 3 microseconds.\r
+ @param EfiUsbHcStateSuspend The host controller is in the\r
+ suspend state. No USB\r
+ transactions can occur while in\r
+ this state. The host controller\r
+ enters this state for the\r
+ following reasons: 1) Explicitly\r
+ set by software. 2) Triggered\r
+ when there is no bus traffic for\r
+ 3 microseconds.\r
\r
**/\r
typedef enum {\r
**/\r
typedef\r
EFI_STATUS\r
-(EFIAPI *EFI_USB2_HC_PROTOCOL_GET_STATE) (\r
+(EFIAPI *EFI_USB2_HC_PROTOCOL_GET_STATE)(\r
IN CONST EFI_USB2_HC_PROTOCOL *This,\r
OUT EFI_USB_HC_STATE *State\r
)\r
**/\r
typedef\r
EFI_STATUS\r
-(EFIAPI *EFI_USB2_HC_PROTOCOL_SET_STATE) (\r
+(EFIAPI *EFI_USB2_HC_PROTOCOL_SET_STATE)(\r
IN EFI_USB2_HC_PROTOCOL *This,\r
IN EFI_USB_HC_STATE State\r
)\r
received from USB device.\r
@param DataLength On input, indicates the size, in bytes, of the data buffer specified by Data.\r
On output, indicates the amount of data actually transferred.\r
- @param Translator A pointer to the transaction translator data.\r
@param TimeOut Indicates the maximum time, in milliseconds, which the transfer is\r
allowed to complete.\r
+ @param Translator A pointer to the transaction translator data.\r
@param TransferResult A pointer to the detailed result information generated by this control\r
transfer.\r
\r
**/\r
typedef\r
EFI_STATUS\r
-(EFIAPI *EFI_USB2_HC_PROTOCOL_CONTROL_TRANSFER) (\r
+(EFIAPI *EFI_USB2_HC_PROTOCOL_CONTROL_TRANSFER)(\r
IN EFI_USB2_HC_PROTOCOL *This,\r
IN UINT8 DeviceAddress,\r
IN UINT8 DeviceSpeed,\r
@param DataLength When input, indicates the size, in bytes, of the data buffers specified by\r
Data. When output, indicates the actually transferred data size.\r
@param DataToggle A pointer to the data toggle value.\r
- @param Translator A pointer to the transaction translator data.\r
@param TimeOut Indicates the maximum time, in milliseconds, which the transfer is\r
allowed to complete.\r
+ @param Translator A pointer to the transaction translator data.\r
@param TransferResult A pointer to the detailed result information of the bulk transfer.\r
\r
@retval EFI_SUCCESS The bulk transfer was completed successfully.\r
**/\r
typedef\r
EFI_STATUS\r
-(EFIAPI *EFI_USB2_HC_PROTOCOL_BULK_TRANSFER) (\r
+(EFIAPI *EFI_USB2_HC_PROTOCOL_BULK_TRANSFER)(\r
IN EFI_USB2_HC_PROTOCOL *This,\r
IN UINT8 DeviceAddress,\r
IN UINT8 EndPointAddress,\r
**/\r
typedef\r
EFI_STATUS\r
-(EFIAPI *EFI_USB2_HC_PROTOCOL_ASYNC_INTERRUPT_TRANSFER) (\r
+(EFIAPI *EFI_USB2_HC_PROTOCOL_ASYNC_INTERRUPT_TRANSFER)(\r
IN EFI_USB2_HC_PROTOCOL *This,\r
IN UINT8 DeviceAddress,\r
IN UINT8 EndPointAddress,\r
**/\r
typedef\r
EFI_STATUS\r
-(EFIAPI *EFI_USB2_HC_PROTOCOL_SYNC_INTERRUPT_TRANSFER) (\r
+(EFIAPI *EFI_USB2_HC_PROTOCOL_SYNC_INTERRUPT_TRANSFER)(\r
IN EFI_USB2_HC_PROTOCOL *This,\r
IN UINT8 DeviceAddress,\r
IN UINT8 EndPointAddress,\r
**/\r
typedef\r
EFI_STATUS\r
-(EFIAPI *EFI_USB2_HC_PROTOCOL_ISOCHRONOUS_TRANSFER) (\r
+(EFIAPI *EFI_USB2_HC_PROTOCOL_ISOCHRONOUS_TRANSFER)(\r
IN EFI_USB2_HC_PROTOCOL *This,\r
IN UINT8 DeviceAddress,\r
IN UINT8 EndPointAddress,\r
**/\r
typedef\r
EFI_STATUS\r
-(EFIAPI *EFI_USB2_HC_PROTOCOL_ASYNC_ISOCHRONOUS_TRANSFER) (\r
+(EFIAPI *EFI_USB2_HC_PROTOCOL_ASYNC_ISOCHRONOUS_TRANSFER)(\r
IN EFI_USB2_HC_PROTOCOL *This,\r
IN UINT8 DeviceAddress,\r
IN UINT8 EndPointAddress,\r
**/\r
typedef\r
EFI_STATUS\r
-(EFIAPI *EFI_USB2_HC_PROTOCOL_GET_ROOTHUB_PORT_STATUS) (\r
+(EFIAPI *EFI_USB2_HC_PROTOCOL_GET_ROOTHUB_PORT_STATUS)(\r
IN CONST EFI_USB2_HC_PROTOCOL *This,\r
IN CONST UINT8 PortNumber,\r
OUT EFI_USB_PORT_STATUS *PortStatus\r
**/\r
typedef\r
EFI_STATUS\r
-(EFIAPI *EFI_USB2_HC_PROTOCOL_SET_ROOTHUB_PORT_FEATURE) (\r
+(EFIAPI *EFI_USB2_HC_PROTOCOL_SET_ROOTHUB_PORT_FEATURE)(\r
IN EFI_USB2_HC_PROTOCOL *This,\r
IN UINT8 PortNumber,\r
IN EFI_USB_PORT_FEATURE PortFeature\r
**/\r
typedef\r
EFI_STATUS\r
-(EFIAPI *EFI_USB2_HC_PROTOCOL_CLEAR_ROOTHUB_PORT_FEATURE) (\r
+(EFIAPI *EFI_USB2_HC_PROTOCOL_CLEAR_ROOTHUB_PORT_FEATURE)(\r
IN EFI_USB2_HC_PROTOCOL *This,\r
IN UINT8 PortNumber,\r
IN EFI_USB_PORT_FEATURE PortFeature\r
)\r
;\r
\r
+/** \r
+ @par Protocol Description:\r
+ The EFI_USB2_HC_PROTOCOL provides USB host controller management, basic \r
+ data transactions over a USB bus, and USB root hub access. A device driver \r
+ that wishes to manage a USB bus in a system retrieves the EFI_USB2_HC_PROTOCOL \r
+ instance that is associated with the USB bus to be managed. A device handle \r
+ for a USB host controller will minimally contain an EFI_DEVICE_PATH_PROTOCOL \r
+ instance, and an EFI_USB2_HC_PROTOCOL instance.\r
+\r
+ @param GetCapability\r
+ Retrieves the capabilities of the USB host controller. \r
+\r
+ @param Reset\r
+ Software reset of USB. \r
+\r
+ @param GetState\r
+ Retrieves the current state of the USB host controller. \r
+\r
+ @param SetState\r
+ Sets the USB host controller to a specific state. \r
+\r
+ @param ControlTransfer\r
+ Submits a control transfer to a target USB device. \r
+\r
+ @param BulkTransfer\r
+ Submits a bulk transfer to a bulk endpoint of a USB device. \r
+\r
+ @param AsyncInterruptTransfer\r
+ Submits an asynchronous interrupt transfer to an interrupt endpoint of a USB device. \r
+\r
+ @param SyncInterruptTransfer\r
+ Submits a synchronous interrupt transfer to an interrupt endpoint of a USB device. \r
+\r
+ @param IsochronousTransfer\r
+ Submits isochronous transfer to an isochronous endpoint of a USB device. \r
+\r
+ @param AsyncIsochronousTransfer\r
+ Submits nonblocking USB isochronous transfer. \r
+\r
+ @param GetRootHubPortStatus\r
+ Retrieves the status of the specified root hub port. \r
+\r
+ @param SetRootHubPortFeature\r
+ Sets the feature for the specified root hub port. \r
+\r
+ @param ClearRootHubPortFeature\r
+ Clears the feature for the specified root hub port. \r
+\r
+ @param MajorRevision\r
+ The major revision number of the USB host controller. The revision information \r
+ indicates the release of the Universal Serial Bus Specification with which the \r
+ host controller is compliant.\r
+\r
+ @param MinorRevision\r
+ The minor revision number of the USB host controller. The revision information \r
+ indicates the release of the Universal Serial Bus Specification with which the \r
+ host controller is compliant.\r
+**/\r
struct _EFI_USB2_HC_PROTOCOL {\r
EFI_USB2_HC_PROTOCOL_GET_CAPABILITY GetCapability;\r
EFI_USB2_HC_PROTOCOL_RESET Reset;\r
projects / mirror_edk2.git / blobdiff