running in the EFI boot services environment, to perform data transactions over \r
a USB bus. In addition, it provides an abstraction for the root hub of the USB bus.\r
\r
- Copyright (c) 2006, Intel Corporation\r
+ Copyright (c) 2006 - 2008, Intel Corporation\r
All rights reserved. This program and the accompanying materials\r
are licensed and made available under the terms and conditions of the BSD License\r
which accompanies this distribution. The full text of the license may be found at\r
0x3e745226, 0x9818, 0x45b6, {0xa2, 0xac, 0xd7, 0xcd, 0xe, 0x8b, 0xa2, 0xbc } \\r
}\r
\r
-//\r
-// Forward reference for pure ANSI compatability\r
-//\r
+///\r
+/// Forward reference for pure ANSI compatability\r
+///\r
typedef struct _EFI_USB2_HC_PROTOCOL EFI_USB2_HC_PROTOCOL;\r
\r
\r
OUT UINT8 *MaxSpeed,\r
OUT UINT8 *PortNumber,\r
OUT UINT8 *Is64BitCapable\r
- )\r
-;\r
+ );\r
\r
#define EFI_USB_HC_RESET_GLOBAL 0x0001\r
#define EFI_USB_HC_RESET_HOST_CONTROLLER 0x0002\r
(EFIAPI *EFI_USB2_HC_PROTOCOL_RESET)(\r
IN EFI_USB2_HC_PROTOCOL *This,\r
IN UINT16 Attributes\r
- )\r
-;\r
+ );\r
\r
/**\r
-\r
- @param EfiUsbHcStateHalt The host controller is in halt\r
- state. No USB transactions can occur\r
- while in this state. The host\r
- controller can enter this state for\r
- three reasons: 1) After host\r
- controller hardware reset. 2)\r
- Explicitly set by software. 3)\r
- Triggered by a fatal error such as\r
- consistency check failure.\r
-\r
-\r
- @param EfiUsbHcStateOperational The host controller is in an\r
- operational state. When in\r
- this state, the host\r
- controller can execute bus\r
- traffic. This state must be\r
- explicitly set to enable the\r
- USB bus traffic.\r
-\r
-\r
- @param EfiUsbHcStateSuspend The host controller is in the\r
- suspend state. No USB\r
- transactions can occur while in\r
- this state. The host controller\r
- enters this state for the\r
- following reasons: 1) Explicitly\r
- set by software. 2) Triggered\r
- when there is no bus traffic for\r
- 3 microseconds.\r
-\r
+ Enumration value for status of USB HC.\r
**/\r
typedef enum {\r
- EfiUsbHcStateHalt,\r
- EfiUsbHcStateOperational,\r
- EfiUsbHcStateSuspend,\r
- EfiUsbHcStateMaximum\r
+ EfiUsbHcStateHalt, ///< The host controller is in halt\r
+ ///< state. No USB transactions can occur\r
+ ///< while in this state. The host\r
+ ///< controller can enter this state for\r
+ ///< three reasons: 1) After host\r
+ ///< controller hardware reset. 2)\r
+ ///< Explicitly set by software. 3)\r
+ ///< Triggered by a fatal error such as\r
+ ///< consistency check failure.\r
+ \r
+ EfiUsbHcStateOperational, ///< The host controller is in an\r
+ ///< operational state. When in\r
+ ///< this state, the host\r
+ ///< controller can execute bus\r
+ ///< traffic. This state must be\r
+ ///< explicitly set to enable the\r
+ ///< USB bus traffic.\r
+ \r
+ EfiUsbHcStateSuspend, ///< The host controller is in the\r
+ ///< suspend state. No USB\r
+ ///< transactions can occur while in\r
+ ///< this state. The host controller\r
+ ///< enters this state for the\r
+ ///< following reasons: 1) Explicitly\r
+ ///< set by software. 2) Triggered\r
+ ///< when there is no bus traffic for\r
+ ///< 3 microseconds.\r
+ \r
+ EfiUsbHcStateMaximum ///< Maximum value for enumration value of HC status.\r
} EFI_USB_HC_STATE;\r
\r
/**\r
(EFIAPI *EFI_USB2_HC_PROTOCOL_GET_STATE)(\r
IN CONST EFI_USB2_HC_PROTOCOL *This,\r
OUT EFI_USB_HC_STATE *State\r
-)\r
-;\r
+);\r
\r
/**\r
Sets the USB host controller to a specific state.\r
(EFIAPI *EFI_USB2_HC_PROTOCOL_SET_STATE)(\r
IN EFI_USB2_HC_PROTOCOL *This,\r
IN EFI_USB_HC_STATE State\r
- )\r
-;\r
+ );\r
\r
/**\r
Submits control transfer to a target USB device.\r
IN UINTN TimeOut,\r
IN EFI_USB2_HC_TRANSACTION_TRANSLATOR *Translator,\r
OUT UINT32 *TransferResult\r
- )\r
-;\r
+ );\r
\r
#define EFI_USB_MAX_BULK_BUFFER_NUM 10\r
\r
IN UINTN TimeOut,\r
IN EFI_USB2_HC_TRANSACTION_TRANSLATOR *Translator,\r
OUT UINT32 *TransferResult\r
- )\r
-;\r
+ );\r
\r
/**\r
Submits an asynchronous interrupt transfer to an interrupt endpoint of a USB device.\r
IN EFI_USB2_HC_TRANSACTION_TRANSLATOR *Translator OPTIONAL,\r
IN EFI_ASYNC_USB_TRANSFER_CALLBACK CallBackFunction OPTIONAL,\r
IN VOID *Context OPTIONAL\r
- )\r
-;\r
+ );\r
\r
/**\r
Submits synchronous interrupt transfer to an interrupt endpoint of a USB device.\r
IN UINTN TimeOut,\r
IN EFI_USB2_HC_TRANSACTION_TRANSLATOR *Translator,\r
OUT UINT32 *TransferResult\r
- )\r
-;\r
+ );\r
\r
#define EFI_USB_MAX_ISO_BUFFER_NUM 7\r
#define EFI_USB_MAX_ISO_BUFFER_NUM1 2\r
IN UINTN DataLength,\r
IN EFI_USB2_HC_TRANSACTION_TRANSLATOR *Translator,\r
OUT UINT32 *TransferResult\r
- )\r
-;\r
+ );\r
\r
/**\r
Submits nonblocking isochronous transfer to an isochronous endpoint of a USB device.\r
IN EFI_USB2_HC_TRANSACTION_TRANSLATOR *Translator,\r
IN EFI_ASYNC_USB_TRANSFER_CALLBACK IsochronousCallBack,\r
IN VOID *Context OPTIONAL\r
- )\r
-;\r
+ );\r
\r
/**\r
Retrieves the current status of a USB root hub port.\r
IN CONST EFI_USB2_HC_PROTOCOL *This,\r
IN CONST UINT8 PortNumber,\r
OUT EFI_USB_PORT_STATUS *PortStatus\r
- )\r
-;\r
+ );\r
\r
/**\r
Sets a feature for the specified root hub port.\r
IN EFI_USB2_HC_PROTOCOL *This,\r
IN UINT8 PortNumber,\r
IN EFI_USB_PORT_FEATURE PortFeature\r
- )\r
-;\r
+ );\r
\r
/**\r
Clears a feature for the specified root hub port.\r
IN EFI_USB2_HC_PROTOCOL *This,\r
IN UINT8 PortNumber,\r
IN EFI_USB_PORT_FEATURE PortFeature\r
- )\r
-;\r
-\r
-/** \r
- @par Protocol Description:\r
- The EFI_USB2_HC_PROTOCOL provides USB host controller management, basic \r
- data transactions over a USB bus, and USB root hub access. A device driver \r
- that wishes to manage a USB bus in a system retrieves the EFI_USB2_HC_PROTOCOL \r
- instance that is associated with the USB bus to be managed. A device handle \r
- for a USB host controller will minimally contain an EFI_DEVICE_PATH_PROTOCOL \r
- instance, and an EFI_USB2_HC_PROTOCOL instance.\r
-\r
- @param GetCapability\r
- Retrieves the capabilities of the USB host controller. \r
-\r
- @param Reset\r
- Software reset of USB. \r
-\r
- @param GetState\r
- Retrieves the current state of the USB host controller. \r
-\r
- @param SetState\r
- Sets the USB host controller to a specific state. \r
-\r
- @param ControlTransfer\r
- Submits a control transfer to a target USB device. \r
-\r
- @param BulkTransfer\r
- Submits a bulk transfer to a bulk endpoint of a USB device. \r
-\r
- @param AsyncInterruptTransfer\r
- Submits an asynchronous interrupt transfer to an interrupt endpoint of a USB device. \r
-\r
- @param SyncInterruptTransfer\r
- Submits a synchronous interrupt transfer to an interrupt endpoint of a USB device. \r
-\r
- @param IsochronousTransfer\r
- Submits isochronous transfer to an isochronous endpoint of a USB device. \r
-\r
- @param AsyncIsochronousTransfer\r
- Submits nonblocking USB isochronous transfer. \r
-\r
- @param GetRootHubPortStatus\r
- Retrieves the status of the specified root hub port. \r
-\r
- @param SetRootHubPortFeature\r
- Sets the feature for the specified root hub port. \r
-\r
- @param ClearRootHubPortFeature\r
- Clears the feature for the specified root hub port. \r
-\r
- @param MajorRevision\r
- The major revision number of the USB host controller. The revision information \r
- indicates the release of the Universal Serial Bus Specification with which the \r
- host controller is compliant.\r
-\r
- @param MinorRevision\r
- The minor revision number of the USB host controller. The revision information \r
- indicates the release of the Universal Serial Bus Specification with which the \r
- host controller is compliant.\r
-**/\r
+ );\r
+\r
+///\r
+/// The EFI_USB2_HC_PROTOCOL provides USB host controller management, basic \r
+/// data transactions over a USB bus, and USB root hub access. A device driver \r
+/// that wishes to manage a USB bus in a system retrieves the EFI_USB2_HC_PROTOCOL \r
+/// instance that is associated with the USB bus to be managed. A device handle \r
+/// for a USB host controller will minimally contain an EFI_DEVICE_PATH_PROTOCOL \r
+/// instance, and an EFI_USB2_HC_PROTOCOL instance.\r
+///\r
struct _EFI_USB2_HC_PROTOCOL {\r
EFI_USB2_HC_PROTOCOL_GET_CAPABILITY GetCapability;\r
EFI_USB2_HC_PROTOCOL_RESET Reset;\r
EFI_USB2_HC_PROTOCOL_GET_ROOTHUB_PORT_STATUS GetRootHubPortStatus;\r
EFI_USB2_HC_PROTOCOL_SET_ROOTHUB_PORT_FEATURE SetRootHubPortFeature;\r
EFI_USB2_HC_PROTOCOL_CLEAR_ROOTHUB_PORT_FEATURE ClearRootHubPortFeature;\r
+ \r
+ ///\r
+ /// The major revision number of the USB host controller. The revision information \r
+ /// indicates the release of the Universal Serial Bus Specification with which the \r
+ /// host controller is compliant.\r
+ ///\r
UINT16 MajorRevision;\r
+\r
+ ///\r
+ /// The minor revision number of the USB host controller. The revision information \r
+ /// indicates the release of the Universal Serial Bus Specification with which the \r
+ /// host controller is compliant. \r
+ ///\r
UINT16 MinorRevision;\r
};\r
\r
projects / mirror_edk2.git / blobdiff