--- /dev/null
+/** @file\r
+Implementation of SmBusLib class library for PEI phase.\r
+\r
+Copyright (c) 2006, Intel Corporation<BR>\r
+All rights reserved. This program and the accompanying materials \r
+are licensed and made available under the terms and conditions of the BSD License \r
+which accompanies this distribution. The full text of the license may be found at \r
+http://opensource.org/licenses/bsd-license.php \r
+ \r
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, \r
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. \r
+\r
+\r
+Module Name: SmbusLib.c\r
+\r
+**/\r
+\r
+#include <Ppi/Smbus2.h>\r
+#include "InternalSmbusLib.h"\r
+\r
+/**\r
+ Executes an SMBUS quick read command.\r
+\r
+ Executes an SMBUS quick read command on the SMBUS device specified by SmBusAddress.\r
+ Only the SMBUS slave address field of SmBusAddress is required.\r
+ If Status is not NULL, then the status of the executed command is returned in Status.\r
+ If PEC is set in SmBusAddress, then ASSERT().\r
+ If Command in SmBusAddress is not zero, then ASSERT().\r
+ If Length in SmBusAddress is not zero, then ASSERT().\r
+ If any reserved bits of SmBusAddress are set, then ASSERT().\r
+\r
+ @param SmBusAddress Address that encodes the SMBUS Slave Address,\r
+ SMBUS Command, SMBUS Data Length, and PEC.\r
+ @param Status Return status for the executed command.\r
+ This is an optional parameter and may be NULL.\r
+\r
+**/\r
+VOID\r
+EFIAPI\r
+SmBusQuickRead (\r
+ IN UINTN SmBusAddress,\r
+ OUT RETURN_STATUS *Status OPTIONAL\r
+ )\r
+{\r
+ ASSERT (!SMBUS_LIB_PEC (SmBusAddress));\r
+ ASSERT (SMBUS_LIB_COMMAND (SmBusAddress) == 0);\r
+ ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) == 0);\r
+ ASSERT (SMBUS_LIB_RESEARVED (SmBusAddress) == 0);\r
+\r
+ InternalSmBusExec (EfiSmbusQuickRead, SmBusAddress, 0, NULL, Status);\r
+}\r
+\r
+/**\r
+ Executes an SMBUS quick write command.\r
+\r
+ Executes an SMBUS quick write command on the SMBUS device specified by SmBusAddress.\r
+ Only the SMBUS slave address field of SmBusAddress is required.\r
+ If Status is not NULL, then the status of the executed command is returned in Status.\r
+ If PEC is set in SmBusAddress, then ASSERT().\r
+ If Command in SmBusAddress is not zero, then ASSERT().\r
+ If Length in SmBusAddress is not zero, then ASSERT().\r
+ If any reserved bits of SmBusAddress are set, then ASSERT().\r
+\r
+ @param SmBusAddress Address that encodes the SMBUS Slave Address,\r
+ SMBUS Command, SMBUS Data Length, and PEC.\r
+ @param Status Return status for the executed command.\r
+ This is an optional parameter and may be NULL.\r
+\r
+**/\r
+VOID\r
+EFIAPI\r
+SmBusQuickWrite (\r
+ IN UINTN SmBusAddress,\r
+ OUT RETURN_STATUS *Status OPTIONAL\r
+ )\r
+{\r
+ ASSERT (!SMBUS_LIB_PEC (SmBusAddress));\r
+ ASSERT (SMBUS_LIB_COMMAND (SmBusAddress) == 0);\r
+ ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) == 0);\r
+ ASSERT (SMBUS_LIB_RESEARVED (SmBusAddress) == 0);\r
+\r
+ InternalSmBusExec (EfiSmbusQuickWrite, SmBusAddress, 0, NULL, Status);\r
+}\r
+\r
+/**\r
+ Executes an SMBUS receive byte command.\r
+\r
+ Executes an SMBUS receive byte command on the SMBUS device specified by SmBusAddress.\r
+ Only the SMBUS slave address field of SmBusAddress is required.\r
+ The byte received from the SMBUS is returned.\r
+ If Status is not NULL, then the status of the executed command is returned in Status.\r
+ If Command in SmBusAddress is not zero, then ASSERT().\r
+ If Length in SmBusAddress is not zero, then ASSERT().\r
+ If any reserved bits of SmBusAddress are set, then ASSERT().\r
+\r
+ @param SmBusAddress Address that encodes the SMBUS Slave Address,\r
+ SMBUS Command, SMBUS Data Length, and PEC.\r
+ @param Status Return status for the executed command.\r
+ This is an optional parameter and may be NULL.\r
+\r
+ @return The byte received from the SMBUS.\r
+\r
+**/\r
+UINT8\r
+EFIAPI\r
+SmBusReceiveByte (\r
+ IN UINTN SmBusAddress,\r
+ OUT RETURN_STATUS *Status OPTIONAL\r
+ )\r
+{\r
+ UINT8 Byte;\r
+\r
+ ASSERT (SMBUS_LIB_COMMAND (SmBusAddress) == 0);\r
+ ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) == 0);\r
+ ASSERT (SMBUS_LIB_RESEARVED (SmBusAddress) == 0);\r
+\r
+ InternalSmBusExec (EfiSmbusReceiveByte, SmBusAddress, 1, &Byte, Status);\r
+\r
+ return Byte;\r
+}\r
+\r
+/**\r
+ Executes an SMBUS send byte command.\r
+\r
+ Executes an SMBUS send byte command on the SMBUS device specified by SmBusAddress.\r
+ The byte specified by Value is sent.\r
+ Only the SMBUS slave address field of SmBusAddress is required. Value is returned.\r
+ If Status is not NULL, then the status of the executed command is returned in Status.\r
+ If Command in SmBusAddress is not zero, then ASSERT().\r
+ If Length in SmBusAddress is not zero, then ASSERT().\r
+ If any reserved bits of SmBusAddress are set, then ASSERT().\r
+\r
+ @param SmBusAddress Address that encodes the SMBUS Slave Address,\r
+ SMBUS Command, SMBUS Data Length, and PEC.\r
+ @param Value The 8-bit value to send.\r
+ @param Status Return status for the executed command.\r
+ This is an optional parameter and may be NULL.\r
+\r
+ @return The parameter of Value.\r
+\r
+**/\r
+UINT8\r
+EFIAPI\r
+SmBusSendByte (\r
+ IN UINTN SmBusAddress,\r
+ IN UINT8 Value,\r
+ OUT RETURN_STATUS *Status OPTIONAL\r
+ )\r
+{\r
+ UINT8 Byte;\r
+\r
+ ASSERT (SMBUS_LIB_COMMAND (SmBusAddress) == 0);\r
+ ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) == 0);\r
+ ASSERT (SMBUS_LIB_RESEARVED (SmBusAddress) == 0);\r
+\r
+ Byte = Value;\r
+ InternalSmBusExec (EfiSmbusSendByte, SmBusAddress, 1, &Byte, Status);\r
+\r
+ return Value;\r
+}\r
+\r
+/**\r
+ Executes an SMBUS read data byte command.\r
+\r
+ Executes an SMBUS read data byte command on the SMBUS device specified by SmBusAddress.\r
+ Only the SMBUS slave address and SMBUS command fields of SmBusAddress are required.\r
+ The 8-bit value read from the SMBUS is returned.\r
+ If Status is not NULL, then the status of the executed command is returned in Status.\r
+ If Length in SmBusAddress is not zero, then ASSERT().\r
+ If any reserved bits of SmBusAddress are set, then ASSERT().\r
+\r
+ @param SmBusAddress Address that encodes the SMBUS Slave Address,\r
+ SMBUS Command, SMBUS Data Length, and PEC.\r
+ @param Status Return status for the executed command.\r
+ This is an optional parameter and may be NULL.\r
+\r
+ @return The byte read from the SMBUS.\r
+\r
+**/\r
+UINT8\r
+EFIAPI\r
+SmBusReadDataByte (\r
+ IN UINTN SmBusAddress,\r
+ OUT RETURN_STATUS *Status OPTIONAL\r
+ )\r
+{\r
+ UINT8 Byte;\r
+\r
+ ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) == 0);\r
+ ASSERT (SMBUS_LIB_RESEARVED (SmBusAddress) == 0);\r
+\r
+ InternalSmBusExec (EfiSmbusReadByte, SmBusAddress, 1, &Byte, Status);\r
+ \r
+ return Byte;\r
+}\r
+\r
+/**\r
+ Executes an SMBUS write data byte command.\r
+\r
+ Executes an SMBUS write data byte command on the SMBUS device specified by SmBusAddress.\r
+ The 8-bit value specified by Value is written.\r
+ Only the SMBUS slave address and SMBUS command fields of SmBusAddress are required.\r
+ Value is returned.\r
+ If Status is not NULL, then the status of the executed command is returned in Status.\r
+ If Length in SmBusAddress is not zero, then ASSERT().\r
+ If any reserved bits of SmBusAddress are set, then ASSERT().\r
+\r
+ @param SmBusAddress Address that encodes the SMBUS Slave Address,\r
+ SMBUS Command, SMBUS Data Length, and PEC.\r
+ @param Value The 8-bit value to write.\r
+ @param Status Return status for the executed command.\r
+ This is an optional parameter and may be NULL.\r
+\r
+ @return The parameter of Value.\r
+\r
+**/\r
+UINT8\r
+EFIAPI\r
+SmBusWriteDataByte (\r
+ IN UINTN SmBusAddress,\r
+ IN UINT8 Value,\r
+ OUT RETURN_STATUS *Status OPTIONAL\r
+ )\r
+{\r
+ UINT8 Byte;\r
+\r
+ ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) == 0);\r
+ ASSERT (SMBUS_LIB_RESEARVED (SmBusAddress) == 0);\r
+\r
+ Byte = Value;\r
+ InternalSmBusExec (EfiSmbusWriteByte, SmBusAddress, 1, &Byte, Status);\r
+ \r
+ return Value;\r
+}\r
+\r
+/**\r
+ Executes an SMBUS read data word command.\r
+\r
+ Executes an SMBUS read data word command on the SMBUS device specified by SmBusAddress.\r
+ Only the SMBUS slave address and SMBUS command fields of SmBusAddress are required.\r
+ The 16-bit value read from the SMBUS is returned.\r
+ If Status is not NULL, then the status of the executed command is returned in Status.\r
+ If Length in SmBusAddress is not zero, then ASSERT().\r
+ If any reserved bits of SmBusAddress are set, then ASSERT().\r
+ \r
+ @param SmBusAddress Address that encodes the SMBUS Slave Address,\r
+ SMBUS Command, SMBUS Data Length, and PEC.\r
+ @param Status Return status for the executed command.\r
+ This is an optional parameter and may be NULL.\r
+\r
+ @return The byte read from the SMBUS.\r
+\r
+**/\r
+UINT16\r
+EFIAPI\r
+SmBusReadDataWord (\r
+ IN UINTN SmBusAddress,\r
+ OUT RETURN_STATUS *Status OPTIONAL\r
+ )\r
+{\r
+ UINT16 Word;\r
+\r
+ ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) == 0);\r
+ ASSERT (SMBUS_LIB_RESEARVED (SmBusAddress) == 0);\r
+\r
+ InternalSmBusExec (EfiSmbusReadWord, SmBusAddress, 2, &Word, Status);\r
+ \r
+ return Word;\r
+}\r
+\r
+/**\r
+ Executes an SMBUS write data word command.\r
+\r
+ Executes an SMBUS write data word command on the SMBUS device specified by SmBusAddress.\r
+ The 16-bit value specified by Value is written.\r
+ Only the SMBUS slave address and SMBUS command fields of SmBusAddress are required.\r
+ Value is returned.\r
+ If Status is not NULL, then the status of the executed command is returned in Status.\r
+ If Length in SmBusAddress is not zero, then ASSERT().\r
+ If any reserved bits of SmBusAddress are set, then ASSERT().\r
+\r
+ @param SmBusAddress Address that encodes the SMBUS Slave Address,\r
+ SMBUS Command, SMBUS Data Length, and PEC.\r
+ @param Value The 16-bit value to write.\r
+ @param Status Return status for the executed command.\r
+ This is an optional parameter and may be NULL.\r
+\r
+ @return The parameter of Value.\r
+\r
+**/\r
+UINT16\r
+EFIAPI\r
+SmBusWriteDataWord (\r
+ IN UINTN SmBusAddress,\r
+ IN UINT16 Value,\r
+ OUT RETURN_STATUS *Status OPTIONAL\r
+ )\r
+{\r
+ UINT16 Word;\r
+\r
+ ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) == 0);\r
+ ASSERT (SMBUS_LIB_RESEARVED (SmBusAddress) == 0);\r
+\r
+ Word = Value;\r
+ InternalSmBusExec (EfiSmbusWriteWord, SmBusAddress, 2, &Word, Status);\r
+\r
+ return Value;\r
+}\r
+\r
+/**\r
+ Executes an SMBUS process call command.\r
+\r
+ Executes an SMBUS process call command on the SMBUS device specified by SmBusAddress.\r
+ The 16-bit value specified by Value is written.\r
+ Only the SMBUS slave address and SMBUS command fields of SmBusAddress are required.\r
+ The 16-bit value returned by the process call command is returned.\r
+ If Status is not NULL, then the status of the executed command is returned in Status.\r
+ If Length in SmBusAddress is not zero, then ASSERT().\r
+ If any reserved bits of SmBusAddress are set, then ASSERT().\r
+\r
+ @param SmBusAddress Address that encodes the SMBUS Slave Address,\r
+ SMBUS Command, SMBUS Data Length, and PEC.\r
+ @param Value The 16-bit value to write.\r
+ @param Status Return status for the executed command.\r
+ This is an optional parameter and may be NULL.\r
+\r
+ @return The 16-bit value returned by the process call command.\r
+\r
+**/\r
+UINT16\r
+EFIAPI\r
+SmBusProcessCall (\r
+ IN UINTN SmBusAddress,\r
+ IN UINT16 Value,\r
+ OUT RETURN_STATUS *Status OPTIONAL\r
+ )\r
+{\r
+ ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) == 0);\r
+ ASSERT (SMBUS_LIB_RESEARVED (SmBusAddress) == 0);\r
+\r
+ InternalSmBusExec (EfiSmbusProcessCall, SmBusAddress, 2, &Value, Status);\r
+ \r
+ return Value;\r
+}\r
+\r
+/**\r
+ Executes an SMBUS read block command.\r
+\r
+ Executes an SMBUS read block command on the SMBUS device specified by SmBusAddress.\r
+ Only the SMBUS slave address and SMBUS command fields of SmBusAddress are required.\r
+ Bytes are read from the SMBUS and stored in Buffer.\r
+ The number of bytes read is returned, and will never return a value larger than 32-bytes.\r
+ If Status is not NULL, then the status of the executed command is returned in Status.\r
+ It is the caller's responsibility to make sure Buffer is large enough for the total number of bytes read.\r
+ SMBUS supports a maximum transfer size of 32 bytes, so Buffer does not need to be any larger than 32 bytes.\r
+ If Length in SmBusAddress is not zero, then ASSERT().\r
+ If Buffer is NULL, then ASSERT().\r
+ If any reserved bits of SmBusAddress are set, then ASSERT().\r
+\r
+ @param SmBusAddress Address that encodes the SMBUS Slave Address,\r
+ SMBUS Command, SMBUS Data Length, and PEC.\r
+ @param Buffer Pointer to the buffer to store the bytes read from the SMBUS.\r
+ @param Status Return status for the executed command.\r
+ This is an optional parameter and may be NULL.\r
+\r
+ @return The number of bytes read.\r
+\r
+**/\r
+UINTN\r
+EFIAPI\r
+SmBusReadBlock (\r
+ IN UINTN SmBusAddress,\r
+ OUT VOID *Buffer,\r
+ OUT RETURN_STATUS *Status OPTIONAL\r
+ )\r
+{\r
+ ASSERT (Buffer != NULL);\r
+ ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) == 0);\r
+ ASSERT (SMBUS_LIB_RESEARVED (SmBusAddress) == 0);\r
+\r
+ return InternalSmBusExec (EfiSmbusReadBlock, SmBusAddress, 0x20, Buffer, Status);\r
+}\r
+\r
+/**\r
+ Executes an SMBUS write block command.\r
+\r
+ Executes an SMBUS write block command on the SMBUS device specified by SmBusAddress.\r
+ The SMBUS slave address, SMBUS command, and SMBUS length fields of SmBusAddress are required.\r
+ Bytes are written to the SMBUS from Buffer.\r
+ The number of bytes written is returned, and will never return a value larger than 32-bytes.\r
+ If Status is not NULL, then the status of the executed command is returned in Status. \r
+ If Length in SmBusAddress is zero or greater than 32, then ASSERT().\r
+ If Buffer is NULL, then ASSERT().\r
+ If any reserved bits of SmBusAddress are set, then ASSERT().\r
+\r
+ @param SmBusAddress Address that encodes the SMBUS Slave Address,\r
+ SMBUS Command, SMBUS Data Length, and PEC.\r
+ @param Buffer Pointer to the buffer to store the bytes read from the SMBUS.\r
+ @param Status Return status for the executed command.\r
+ This is an optional parameter and may be NULL.\r
+\r
+ @return The number of bytes written.\r
+\r
+**/\r
+UINTN\r
+EFIAPI\r
+SmBusWriteBlock (\r
+ IN UINTN SmBusAddress,\r
+ OUT VOID *Buffer,\r
+ OUT RETURN_STATUS *Status OPTIONAL\r
+ )\r
+{\r
+ UINTN Length;\r
+\r
+ ASSERT (Buffer != NULL);\r
+ ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) >= 1);\r
+ ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) <= 32);\r
+ ASSERT (SMBUS_LIB_RESEARVED (SmBusAddress) == 0);\r
+\r
+ Length = SMBUS_LIB_LENGTH (SmBusAddress);\r
+ return InternalSmBusExec (EfiSmbusWriteBlock, SmBusAddress, Length, Buffer, Status);\r
+}\r
+\r
+/**\r
+ Executes an SMBUS block process call command.\r
+\r
+ Executes an SMBUS block process call command on the SMBUS device specified by SmBusAddress.\r
+ The SMBUS slave address, SMBUS command, and SMBUS length fields of SmBusAddress are required.\r
+ Bytes are written to the SMBUS from WriteBuffer. Bytes are then read from the SMBUS into ReadBuffer.\r
+ If Status is not NULL, then the status of the executed command is returned in Status.\r
+ It is the caller's responsibility to make sure ReadBuffer is large enough for the total number of bytes read.\r
+ SMBUS supports a maximum transfer size of 32 bytes, so Buffer does not need to be any larger than 32 bytes.\r
+ If Length in SmBusAddress is zero or greater than 32, then ASSERT().\r
+ If WriteBuffer is NULL, then ASSERT().\r
+ If ReadBuffer is NULL, then ASSERT().\r
+ If any reserved bits of SmBusAddress are set, then ASSERT().\r
+\r
+ @param SmBusAddress Address that encodes the SMBUS Slave Address,\r
+ SMBUS Command, SMBUS Data Length, and PEC.\r
+ @param WriteBuffer Pointer to the buffer of bytes to write to the SMBUS.\r
+ @param ReadBuffer Pointer to the buffer of bytes to read from the SMBUS.\r
+ @param Status Return status for the executed command.\r
+ This is an optional parameter and may be NULL.\r
+\r
+ @return The number of bytes written.\r
+\r
+**/\r
+UINTN\r
+EFIAPI\r
+SmBusBlockProcessCall (\r
+ IN UINTN SmBusAddress,\r
+ IN VOID *WriteBuffer,\r
+ OUT VOID *ReadBuffer,\r
+ OUT RETURN_STATUS *Status OPTIONAL\r
+ )\r
+{\r
+ UINTN Length;\r
+\r
+ ASSERT (WriteBuffer != NULL);\r
+ ASSERT (ReadBuffer != NULL);\r
+ ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) >= 1);\r
+ ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) <= 32);\r
+ ASSERT (SMBUS_LIB_RESEARVED (SmBusAddress) == 0);\r
+\r
+ Length = SMBUS_LIB_LENGTH (SmBusAddress);\r
+ //\r
+ // Assuming that ReadBuffer is large enough to save another memory copy.\r
+ //\r
+ ReadBuffer = CopyMem (ReadBuffer, WriteBuffer, Length);\r
+ return InternalSmBusExec (EfiSmbusBWBRProcessCall, SmBusAddress, Length, ReadBuffer, Status);\r
+}\r
projects / mirror_edk2.git / blobdiff