#\r
# This Package provides all definitions(including functions, MACROs, structures and library classes)\r
# and libraries instances, which are defined in MDE Specification.\r
-# It also provides the definitions(including PPIs/PROTOCOLs/GUIDs) of \r
+# It also provides the definitions(including PPIs/PROTOCOLs/GUIDs) of\r
# EFI1.10/UEFI2.0/UEFI2.1/PI1.0 and some Industry Standards.\r
#\r
# Copyright (c) 2007 - 2008, Intel Corporation.\r
# the terms and conditions of the BSD License which accompanies this distribution.\r
# The full text of the license may be found at\r
# http://opensource.org/licenses/bsd-license.php\r
-# \r
+#\r
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
#\r
Include/Ebc\r
\r
[LibraryClasses.common]\r
- ## @libraryclass Provides most usb APIs to support the Hid requests defined in Usb Hid 1.1 spec \r
+ ## @libraryclass Provides most usb APIs to support the Hid requests defined in Usb Hid 1.1 spec\r
# and the standard requests defined in Usb 1.1 spec.\r
##\r
UefiUsbLib|Include/Library/UefiUsbLib.h\r
TimerLib|Include/Library/TimerLib.h\r
\r
## @libraryclass Provides library functions to access SMBUS devices.\r
- # Libraries of this class must be ported to a specific SMBUS controller. \r
+ # Libraries of this class must be ported to a specific SMBUS controller.\r
SmbusLib|Include/Library/SmbusLib.h\r
\r
## @libraryclass Provides the functions to submit Scsi commands defined in SCSI-2 specification for scsi device.\r
## @libraryclass Provides services to maintain instruction and data caches.\r
CacheMaintenanceLib|Include/Library/CacheMaintenanceLib.h\r
\r
- ## @libraryclass Provides copy memory, fill memory, zero memory, and GUID functions. \r
+ ## @libraryclass Provides copy memory, fill memory, zero memory, and GUID functions.\r
BaseMemoryLib|Include/Library/BaseMemoryLib.h\r
\r
## @libraryclass Provides string functions, linked list functions, math functions, synchronization functions\r
\r
## @libraryclass Provides a set of PI library functions and macros for DXE phase.\r
DxeServicesLib|Include/Library/DxeServicesLib.h\r
- \r
+\r
+ ## @libraryclass Provides synchronization functions.\r
+ ##\r
+ SynchronizationLib|Include/Library/SynchronizationLib.h\r
+\r
[LibraryClasses.IPF]\r
## @libraryclass The SAL Library provides a service to make a SAL CALL.\r
SalLib|Include/Library/SalLib.h\r
#\r
# GUID defined in UEFI2.1/UEFI2.0/EFI1.1\r
#\r
+ ## Include/Guid/GlobalVariable.h\r
gEfiGlobalVariableGuid = { 0x8BE4DF61, 0x93CA, 0x11D2, { 0xAA, 0x0D, 0x00, 0xE0, 0x98, 0x03, 0x2B, 0x8C }}\r
+ \r
gEfiVT100PlusGuid = { 0x7BAEC70B, 0x57E0, 0x4C76, { 0x8E, 0x87, 0x2F, 0x9E, 0x28, 0x08, 0x83, 0x43 }}\r
gEfiVT100Guid = { 0xDFA66065, 0xB419, 0x11D3, { 0x9A, 0x2D, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}\r
gEfiPcAnsiGuid = { 0xE0C14753, 0xF9BE, 0x11D2, { 0x9A, 0x0C, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}\r
gEfiEventMemoryMapChangeGuid = { 0x78BEE926, 0x692F, 0x48FD, { 0x9E, 0xDB, 0x01, 0x42, 0x2E, 0xF0, 0xD7, 0xAB }}\r
gEfiEventVirtualAddressChangeGuid = { 0x13FA7698, 0xC831, 0x49C7, { 0x87, 0xEA, 0x8F, 0x43, 0xFC, 0xC2, 0x51, 0x96 }}\r
gEfiEventExitBootServicesGuid = { 0x27ABF055, 0xB1B8, 0x4C26, { 0x80, 0x48, 0x74, 0x8F, 0x37, 0xBA, 0xA2, 0xDF }}\r
+ gEfiDebugPortVariableGuid = { 0xEBA4E8D2, 0x3858, 0x41EC, { 0xA2, 0x81, 0x26, 0x47, 0xBA, 0x96, 0x60, 0xD0 }}\r
+ gEfiDebugPortDevicePathGuid = { 0xEBA4E8D2, 0x3858, 0x41EC, { 0xA2, 0x81, 0x26, 0x47, 0xBA, 0x96, 0x60, 0xD0 }}\r
\r
#\r
# GUID defined in PI1.0\r
gEfiHardwareErrorVariableGuid = { 0x414E6BDD, 0xE47B, 0x47cc, { 0xB2, 0x44, 0xBB, 0x61, 0x02, 0x0C, 0xF5, 0x16 }}\r
\r
[Ppis.common]\r
+ ## Include/Ppi/MasterBootMode.h\r
gEfiPeiMasterBootModePpiGuid = { 0x7408d748, 0xfc8c, 0x4ee6, {0x92, 0x88, 0xc4, 0xbe, 0xc0, 0x92, 0xa4, 0x10 } }\r
+ \r
gEfiDxeIplPpiGuid = {0xae8ce5d, 0xe448, 0x4437, {0xa8, 0xd7, 0xeb, 0xf5, 0xf1, 0x94, 0xf7, 0x31 }}\r
gEfiPeiMemoryDiscoveredPpiGuid = {0xf894643d, 0xc449, 0x42d1, {0x8e, 0xa8, 0x85, 0xbd, 0xd8, 0xc6, 0x5b, 0xde } }\r
gEfiPeiBootInRecoveryModePpiGuid = { 0x17ee496a, 0xd8e4, 0x4b9a, {0x94, 0xd1, 0xce, 0x82, 0x72, 0x30, 0x8, 0x50 } }\r
#\r
# Protocols defined in PI1.0.\r
#\r
+ \r
+ ## Include/Protocol/Bds.h\r
gEfiBdsArchProtocolGuid = { 0x665E3FF6, 0x46CC, 0x11D4, { 0x9A, 0x38, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}\r
+ \r
gEfiCpuArchProtocolGuid = { 0x26BACCB1, 0x6F42, 0x11D4, { 0xBC, 0xE7, 0x00, 0x80, 0xC7, 0x3C, 0x88, 0x81 }}\r
gEfiMetronomeArchProtocolGuid = { 0x26BACCB2, 0x6F42, 0x11D4, { 0xBC, 0xE7, 0x00, 0x80, 0xC7, 0x3C, 0x88, 0x81 }}\r
gEfiMonotonicCounterArchProtocolGuid = { 0x1DA97072, 0xBDDC, 0x4B30, { 0x99, 0xF1, 0x72, 0xA0, 0xB5, 0x6F, 0xFF, 0x2A }}\r
[PcdsFeatureFlag.common]\r
## If TRUE, the component name protocol will not be installed.\r
gEfiMdePkgTokenSpaceGuid.PcdComponentNameDisable|FALSE|BOOLEAN|0x0000000d\r
- \r
+\r
## If TRUE, the driver diagnostics protocol will not be installed.\r
gEfiMdePkgTokenSpaceGuid.PcdDriverDiagnosticsDisable|FALSE|BOOLEAN|0x0000000e\r
- \r
+\r
## If TRUE, the component name2 protocol will not be installed.\r
gEfiMdePkgTokenSpaceGuid.PcdComponentName2Disable|FALSE|BOOLEAN|0x000000010\r
- \r
+\r
## If TRUE, the driver diagnostics2 protocol will not be installed.\r
gEfiMdePkgTokenSpaceGuid.PcdDriverDiagnostics2Disable|FALSE|BOOLEAN|0x00000011\r
- \r
+\r
## Indicates whether EFI 1.1 ISO 639-2 language supports are obsolete\r
- gEfiMdePkgTokenSpaceGuid.PcdUefiVariableDefaultLangDeprecate|FALSE|BOOLEAN|0x00000012 .\r
+ gEfiMdePkgTokenSpaceGuid.PcdUefiVariableDefaultLangDeprecate|FALSE|BOOLEAN|0x00000012\r
\r
## If TRUE, UGA Draw Protocol is still consumed.\r
- gEfiMdePkgTokenSpaceGuid.PcdUgaConsumeSupport|TRUE|BOOLEAN|0x00000013 .\r
+ gEfiMdePkgTokenSpaceGuid.PcdUgaConsumeSupport|TRUE|BOOLEAN|0x00000013\r
\r
[PcdsFixedAtBuild.common]\r
## Indicates the maximum length of unicode string\r
gEfiMdePkgTokenSpaceGuid.PcdMaximumUnicodeStringLength|1000000|UINT32|0x00000001\r
- \r
+\r
## Indicates the maximum length of ascii string\r
gEfiMdePkgTokenSpaceGuid.PcdMaximumAsciiStringLength|1000000|UINT32|0x00000002\r
- \r
+\r
## Indicates the maximum node number of linked list\r
gEfiMdePkgTokenSpaceGuid.PcdMaximumLinkedListLength|1000000|UINT32|0x00000003\r
- \r
+\r
## Indicates the timeout tick of holding spin lock\r
gEfiMdePkgTokenSpaceGuid.PcdSpinLockTimeout|10000000|UINT32|0x00000004\r
- \r
+\r
## The mask is used to control DebugLib behavior\r
gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask|0|UINT8|0x00000005\r
- \r
+\r
## This flag is used to control the printout of DebugLib\r
gEfiMdePkgTokenSpaceGuid.PcdDebugPrintErrorLevel|0|UINT32|0x00000006\r
- \r
+\r
## The mask is used to control ReportStatusCodeLib behavior\r
gEfiMdePkgTokenSpaceGuid.PcdReportStatusCodePropertyMask|0|UINT8|0x00000007\r
- \r
+\r
## This value is used to fill a segment of memory\r
gEfiMdePkgTokenSpaceGuid.PcdDebugClearMemoryValue|0xAF|UINT8|0x00000008\r
\r
\r
## This value is used to set the base address of pci express hierarchy\r
gEfiMdePkgTokenSpaceGuid.PcdPciExpressBaseAddress|0xE0000000|UINT64|0x0000000a\r
- \r
+\r
## The mask is used to control PostCodeLib behavior\r
gEfiMdePkgTokenSpaceGuid.PcdPostCodePropertyMask|0|UINT8|0x0000000b\r
- \r
+\r
## This value is used to set the FSB clock\r
gEfiMdePkgTokenSpaceGuid.PcdFSBClock|200000000|UINT32|0x0000000c\r
- \r
+\r
## The maxium allowable size of formatted unicode string\r
gEfiMdePkgTokenSpaceGuid.PcdUefiLibMaxPrintBufferSize|320|UINT32|0x101\r
- \r
+\r
## Status code value for indicating a watchdog timer is expired\r
- gEfiMdePkgTokenSpaceGuid.PcdStatusCodeValueEfiWatchDogTimerExpired|0x00011003|UINT32|0x00000013 \r
+ gEfiMdePkgTokenSpaceGuid.PcdStatusCodeValueEfiWatchDogTimerExpired|0x00011003|UINT32|0x00000013\r
\r
## Status code value for indicating the invocation of SetVirtualAddressMap()\r
gEfiMdePkgTokenSpaceGuid.PcdStatusCodeValueSetVirtualAddressMap|0x03101004|UINT32|0x00000014\r
\r
## Status code value for indicating the enable of mouse device\r
gEfiMdePkgTokenSpaceGuid.PcdStatusCodeValueMouseEnable|0x01020004|UINT32|0x30001001\r
- \r
+\r
## Status code value for indicating the disable of mouse device\r
gEfiMdePkgTokenSpaceGuid.PcdStatusCodeValueMouseDisable|0x01020002|UINT32|0x30001002\r
\r
## Indicates the allowable maximum number in extract handler table\r
gEfiMdePkgTokenSpaceGuid.PcdMaximumGuidedExtractHandler|0x10|UINT32|0x00000025\r
\r
+ ## Indicates the default timeouts for USB transfers in milliseconds\r
+ gEfiMdePkgTokenSpaceGuid.PcdUsbTransferTimeoutValue|3000|UINT32|0x00000026\r
+\r
## Default current ISO 639-2 language: English\r
gEfiMdePkgTokenSpaceGuid.PcdUefiVariableDefaultLang|"eng"|VOID*|0x0000001d\r
- \r
+\r
## Default platform supported RFC 3066 languages: (American) English & French\r
gEfiMdePkgTokenSpaceGuid.PcdUefiVariableDefaultPlatformLangCodes|"en-US;fr-FR"|VOID*|0x0000001e\r
- \r
+\r
## Defualt current RFC 3066 language: (American) English\r
gEfiMdePkgTokenSpaceGuid.PcdUefiVariableDefaultPlatformLang|"en-US"|VOID*|0x0000001f\r
- \r
+\r
## Default current ISO 639-2 language: English & French\r
gEfiMdePkgTokenSpaceGuid.PcdUefiVariableDefaultLangCodes|"engfra"|VOID*|0x0000001c\r
- \r
+\r
## Indicates the default baud rate of UART\r
gEfiMdePkgTokenSpaceGuid.PcdUartDefaultBaudRate|115200|UINT64|0x00000020\r
- \r
+\r
## Indicates the number of efficient data bit in UART transaction\r
gEfiMdePkgTokenSpaceGuid.PcdUartDefaultDataBits|8|UINT8|0x00000021\r
- \r
+\r
## Indicates the setting of data parity in UART transaction\r
gEfiMdePkgTokenSpaceGuid.PcdUartDefaultParity|1|UINT8|0x00000022\r
- \r
+\r
## Indicates the setting of stop bit in UART transaction\r
gEfiMdePkgTokenSpaceGuid.PcdUartDefaultStopBits|1|UINT8|0x00000023\r
- \r
+\r
## Indicates the usable type of terminal\r
# 0-PCANSI, 1-VT100, 2-VT00+, 3-UTF8\r
- gEfiMdePkgTokenSpaceGuid.PcdDefaultTerminalType|0|UINT8|0x00000024 \r
- \r
+ gEfiMdePkgTokenSpaceGuid.PcdDefaultTerminalType|0|UINT8|0x00000024\r
+\r
## Status code value for indicating the handoff from Pei phase to Dxe phase\r
gEfiMdePkgTokenSpaceGuid.PcdStatusCodeValuePeiHandoffToDxe|0x3031001|UINT32|0x3000100d\r
\r
\r
## Default current ISO 639-2 language: English & French\r
gEfiMdePkgTokenSpaceGuid.PcdUefiVariableDefaultLangCodes|"engfra"|VOID*|0x0000001c\r
- \r
+\r
## Default current ISO 639-2 language: English\r
gEfiMdePkgTokenSpaceGuid.PcdUefiVariableDefaultLang|"eng"|VOID*|0x0000001d\r
- \r
+\r
## Default platform supported RFC 3066 languages: (American) English & French\r
gEfiMdePkgTokenSpaceGuid.PcdUefiVariableDefaultPlatformLangCodes|"en-US;fr-FR"|VOID*|0x0000001e\r
- \r
+\r
## Defualt current RFC 3066 language: (American) English\r
gEfiMdePkgTokenSpaceGuid.PcdUefiVariableDefaultPlatformLang|"en-US"|VOID*|0x0000001f\r
- \r
+\r
## Indicates the default baud rate of UART\r
gEfiMdePkgTokenSpaceGuid.PcdUartDefaultBaudRate|115200|UINT64|0x00000020\r
\r
\r
## Indicates the allowable maximum number in extract handler table\r
gEfiMdePkgTokenSpaceGuid.PcdMaximumGuidedExtractHandler|0x10|UINT32|0x00000025\r
+ \r
+ ## Indicates the default timeouts for USB transfers in milliseconds\r
+ gEfiMdePkgTokenSpaceGuid.PcdUsbTransferTimeoutValue|3000|UINT32|0x00000026\r
\r
[PcdsDynamic.common]\r
## Default current ISO 639-2 language: English & French\r
\r
## Default current ISO 639-2 language: English\r
gEfiMdePkgTokenSpaceGuid.PcdUefiVariableDefaultLang|"eng"|VOID*|0x0000001d\r
- \r
+\r
## Default platform supported RFC 3066 languages: (American) English & French\r
gEfiMdePkgTokenSpaceGuid.PcdUefiVariableDefaultPlatformLangCodes|"en-US;fr-FR"|VOID*|0x0000001e\r
\r
## Indicates the usable type of terminal\r
# 0-PCANSI, 1-VT100, 2-VT00+, 3-UTF8\r
gEfiMdePkgTokenSpaceGuid.PcdDefaultTerminalType|0|UINT8|0x00000024\r
- \r
+\r
## This value is used to set the base address of pci express hierarchy\r
gEfiMdePkgTokenSpaceGuid.PcdPciExpressBaseAddress|0xE0000000|UINT64|0x0000000a\r