/** @file\r
DnsDxe support functions implementation.\r
- \r
-Copyright (c) 2015 - 2016, Intel Corporation. All rights reserved.<BR>\r
+\r
+Copyright (c) 2015 - 2018, Intel Corporation. All rights reserved.<BR>\r
This program and the accompanying materials\r
are licensed and made available under the terms and conditions of the BSD License\r
which accompanies this distribution. The full text of the license may be found at\r
#define DNS_STATE_DESTROY 2\r
\r
#define DNS_DEFAULT_TIMEOUT 2\r
-#define DNS_DEFAULT_RETRY 3\r
-#define DNS_DEFAULT_BLKSIZE 512\r
\r
#define DNS_TIME_TO_GETMAP 5\r
\r
\r
typedef struct {\r
LIST_ENTRY AllCacheLink;\r
- EFI_DNS4_CACHE_ENTRY DnsCache; \r
+ EFI_DNS4_CACHE_ENTRY DnsCache;\r
} DNS4_CACHE;\r
\r
typedef struct {\r
LIST_ENTRY AllCacheLink;\r
- EFI_DNS6_CACHE_ENTRY DnsCache; \r
+ EFI_DNS6_CACHE_ENTRY DnsCache;\r
} DNS6_CACHE;\r
\r
typedef struct {\r
LIST_ENTRY AllServerLink;\r
- EFI_IPv4_ADDRESS Dns4ServerIp; \r
+ EFI_IPv4_ADDRESS Dns4ServerIp;\r
} DNS4_SERVER_IP;\r
\r
typedef struct {\r
LIST_ENTRY AllServerLink;\r
- EFI_IPv6_ADDRESS Dns6ServerIp; \r
+ EFI_IPv6_ADDRESS Dns6ServerIp;\r
} DNS6_SERVER_IP;\r
\r
typedef struct {\r
+ UINT32 RetryCounting;\r
UINT32 PacketToLive;\r
CHAR16 *QueryHostName;\r
EFI_IPv4_ADDRESS QueryIpAddress;\r
} DNS4_TOKEN_ENTRY;\r
\r
typedef struct {\r
+ UINT32 RetryCounting;\r
UINT32 PacketToLive;\r
CHAR16 *QueryHostName;\r
EFI_IPv6_ADDRESS QueryIpAddress;\r
\r
@retval EFI_SUCCESS Remove TokenEntry from TokenMap sucessfully.\r
@retval EFI_NOT_FOUND TokenEntry is not found in TokenMap.\r
- \r
+\r
**/\r
EFI_STATUS\r
Dns6RemoveTokenEntry (\r
EFIAPI\r
GetDns4TokenEntry (\r
IN NET_MAP *TokensMap,\r
- IN EFI_DNS4_COMPLETION_TOKEN *Token, \r
+ IN EFI_DNS4_COMPLETION_TOKEN *Token,\r
OUT DNS4_TOKEN_ENTRY **TokenEntry\r
);\r
\r
EFIAPI\r
GetDns6TokenEntry (\r
IN NET_MAP *TokensMap,\r
- IN EFI_DNS6_COMPLETION_TOKEN *Token, \r
+ IN EFI_DNS6_COMPLETION_TOKEN *Token,\r
OUT DNS6_TOKEN_ENTRY **TokenEntry\r
);\r
\r
\r
/**\r
Poll the UDP to get the IP4 default address, which may be retrieved\r
- by DHCP. \r
- \r
- The default time out value is 5 seconds. If IP has retrieved the default address, \r
+ by DHCP.\r
+\r
+ The default time out value is 5 seconds. If IP has retrieved the default address,\r
the UDP is reconfigured.\r
\r
@param Instance The DNS instance\r
\r
/**\r
Configure the UDP.\r
- \r
+\r
@param Instance The DNS session\r
@param UdpIo The UDP_IO instance\r
- \r
+\r
@retval EFI_SUCCESS The UDP is successfully configured for the\r
session.\r
\r
\r
/**\r
Configure the UDP.\r
- \r
+\r
@param Instance The DNS session\r
@param UdpIo The UDP_IO instance\r
\r
\r
/**\r
Update Dns4 cache to shared list of caches of all DNSv4 instances.\r
- \r
+\r
@param Dns4CacheList All Dns4 cache list.\r
- @param DeleteFlag If FALSE, this function is to add one entry to the DNS Cache. \r
- If TRUE, this function will delete matching DNS Cache entry. \r
- @param Override If TRUE, the matching DNS cache entry will be overwritten with the supplied parameter. \r
+ @param DeleteFlag If FALSE, this function is to add one entry to the DNS Cache.\r
+ If TRUE, this function will delete matching DNS Cache entry.\r
+ @param Override If TRUE, the matching DNS cache entry will be overwritten with the supplied parameter.\r
If FALSE, EFI_ACCESS_DENIED will be returned if the entry to be added is already exists.\r
@param DnsCacheEntry Entry Pointer to DNS Cache entry.\r
\r
@retval EFI_SUCCESS Update Dns4 cache successfully.\r
- @retval Others Failed to update Dns4 cache. \r
- \r
+ @retval Others Failed to update Dns4 cache.\r
+\r
**/\r
EFI_STATUS\r
EFIAPI\r
);\r
\r
/**\r
- Update Dns6 cache to shared list of caches of all DNSv6 instances. \r
+ Update Dns6 cache to shared list of caches of all DNSv6 instances.\r
\r
@param Dns6CacheList All Dns6 cache list.\r
- @param DeleteFlag If FALSE, this function is to add one entry to the DNS Cache. \r
- If TRUE, this function will delete matching DNS Cache entry. \r
- @param Override If TRUE, the matching DNS cache entry will be overwritten with the supplied parameter. \r
+ @param DeleteFlag If FALSE, this function is to add one entry to the DNS Cache.\r
+ If TRUE, this function will delete matching DNS Cache entry.\r
+ @param Override If TRUE, the matching DNS cache entry will be overwritten with the supplied parameter.\r
If FALSE, EFI_ACCESS_DENIED will be returned if the entry to be added is already exists.\r
@param DnsCacheEntry Entry Pointer to DNS Cache entry.\r
- \r
+\r
@retval EFI_SUCCESS Update Dns6 cache successfully.\r
@retval Others Failed to update Dns6 cache.\r
-**/ \r
+**/\r
EFI_STATUS\r
EFIAPI\r
UpdateDns6Cache (\r
);\r
\r
/**\r
- Add Dns4 ServerIp to common list of addresses of all configured DNSv4 server. \r
+ Add Dns4 ServerIp to common list of addresses of all configured DNSv4 server.\r
\r
- @param Dns4ServerList Common list of addresses of all configured DNSv4 server. \r
- @param ServerIp DNS server Ip. \r
+ @param Dns4ServerList Common list of addresses of all configured DNSv4 server.\r
+ @param ServerIp DNS server Ip.\r
\r
@retval EFI_SUCCESS Add Dns4 ServerIp to common list successfully.\r
@retval Others Failed to add Dns4 ServerIp to common list.\r
- \r
+\r
**/\r
EFI_STATUS\r
EFIAPI\r
);\r
\r
/**\r
- Add Dns6 ServerIp to common list of addresses of all configured DNSv6 server. \r
+ Add Dns6 ServerIp to common list of addresses of all configured DNSv6 server.\r
\r
- @param Dns6ServerList Common list of addresses of all configured DNSv6 server. \r
- @param ServerIp DNS server Ip. \r
+ @param Dns6ServerList Common list of addresses of all configured DNSv6 server.\r
+ @param ServerIp DNS server Ip.\r
\r
@retval EFI_SUCCESS Add Dns6 ServerIp to common list successfully.\r
@retval Others Failed to add Dns6 ServerIp to common list.\r
- \r
-**/ \r
+\r
+**/\r
EFI_STATUS\r
EFIAPI\r
AddDns6ServerIp (\r
IN EFI_IPv6_ADDRESS ServerIp\r
);\r
\r
-/**\r
- Fill QName for IP querying. QName is a domain name represented as \r
- a sequence of labels, where each label consists of a length octet \r
- followed by that number of octets. The domain name terminates with \r
- the zero length octet for the null label of the root.\r
-\r
- @param HostName Queried HostName \r
-\r
- @retval NULL Failed to fill QName.\r
- @return QName filled successfully.\r
- \r
-**/ \r
-CHAR8 *\r
-EFIAPI\r
-DnsFillinQNameForQueryIp (\r
- IN CHAR16 *HostName\r
- );\r
-\r
/**\r
Find out whether the response is valid or invalid.\r
\r
- @param TokensMap All DNS transmittal Tokens entry. \r
- @param Identification Identification for queried packet. \r
+ @param TokensMap All DNS transmittal Tokens entry.\r
+ @param Identification Identification for queried packet.\r
@param Type Type for queried packet.\r
+ @param Class Class for queried packet.\r
@param Item Return corresponding Token entry.\r
\r
@retval TRUE The response is valid.\r
@retval FALSE The response is invalid.\r
- \r
-**/ \r
+\r
+**/\r
BOOLEAN\r
IsValidDnsResponse (\r
IN NET_MAP *TokensMap,\r
IN UINT16 Identification,\r
IN UINT16 Type,\r
+ IN UINT16 Class,\r
OUT NET_MAP_ITEM **Item\r
);\r
\r
\r
@param Instance The DNS instance\r
@param RxString Received buffer.\r
- @param Completed Flag to indicate that Dns response is valid. \r
- \r
+ @param Completed Flag to indicate that Dns response is valid.\r
+\r
@retval EFI_SUCCESS Parse Dns Response successfully.\r
@retval Others Failed to parse Dns Response.\r
- \r
-**/ \r
+\r
+**/\r
EFI_STATUS\r
ParseDnsResponse (\r
IN OUT DNS_INSTANCE *Instance,\r
@param IoStatus The status of the UDP receive\r
@param Context The opaque parameter to the function.\r
\r
-**/ \r
+**/\r
VOID\r
EFIAPI\r
DnsOnPacketReceived (\r
Construct the Packet according query section.\r
\r
@param Instance The DNS instance\r
- @param QueryName Queried Name \r
- @param Type Queried Type \r
- @param Class Queried Class \r
+ @param QueryName Queried Name\r
+ @param Type Queried Type\r
+ @param Class Queried Class\r
@param Packet The packet for query\r
\r
@retval EFI_SUCCESS The packet is constructed.\r
Retransmit the packet.\r
\r
@param Instance The DNS instance\r
- @param Packet Retransmit the packet \r
+ @param Packet Retransmit the packet\r
\r
@retval EFI_SUCCESS The packet is retransmitted.\r
@retval Others Failed to retransmit.\r
\r
\r
/**\r
- This function is used to retrieve DNS mode data for this DNS instance.\r
+ Retrieve mode data of this DNS instance.\r
\r
- @param[in] This Pointer to EFI_DNS4_PROTOCOL instance.\r
- @param[out] DnsModeData Pointer to the caller-allocated storage for the EFI_DNS4_MODE_DATA structure.\r
+ This function is used to retrieve DNS mode data for this DNS instance.\r
\r
- @retval EFI_SUCCESS The operation completed successfully.\r
- @retval EFI_NOT_STARTED When DnsConfigData is queried, no configuration data is \r
- available because this instance has not been configured.\r
- @retval EFI_OUT_OF_RESOURCES Failed to allocate needed resources.\r
- @retval EFI_INVALID_PARAMETER This is NULL or DnsModeData is NULL.\r
+ @param[in] This Pointer to EFI_DNS4_PROTOCOL instance.\r
+ @param[out] DnsModeData Point to the mode data.\r
\r
+ @retval EFI_SUCCESS The operation completed successfully.\r
+ @retval EFI_NOT_STARTED When DnsConfigData is queried, no configuration data\r
+ is available because this instance has not been\r
+ configured.\r
+ @retval EFI_INVALID_PARAMETER This is NULL or DnsModeData is NULL.\r
+ @retval EFI_OUT_OF_RESOURCES Failed to allocate needed resources.\r
**/\r
EFI_STATUS\r
EFIAPI\r
);\r
\r
/**\r
- This function is used to configure DNS configuration data for this DNS instance.\r
-\r
- @param[in] This Pointer to EFI_DNS4_PROTOCOL instance.\r
- @param[in] DnsConfigData Pointer to caller-allocated buffer containing EFI_DNS4_CONFIG_DATA structure. \r
- If NULL, the driver will reinitialize the protocol instance to the unconfigured state.\r
-\r
- @retval EFI_SUCCESS The operation completed successfully.\r
- @retval EFI_UNSUPPORTED The designated protocol is not supported.\r
- @retval EFI_OUT_OF_RESOURCES Failed to allocate needed resources.\r
- @retval EFI_INVALID_PARAMETER This is NULL.\r
- The StationIp address provided in DnsConfigData is not a valid unicast.\r
- DnsServerList is NULL while DnsServerListCount is not equal to Zero.\r
- DnsServerListCount is Zero while DnsServerListCount is not equal to NULL.\r
- @retval EFI_DEVICE_ERROR An unexpected system or network error occurred. The EFI DNSv4 Protocol instance is not configured.\r
-\r
+ Configure this DNS instance.\r
+\r
+ This function is used to configure DNS mode data for this DNS instance.\r
+\r
+ @param[in] This Pointer to EFI_DNS4_PROTOCOL instance.\r
+ @param[in] DnsConfigData Point to the Configuration data.\r
+\r
+ @retval EFI_SUCCESS The operation completed successfully.\r
+ @retval EFI_UNSUPPORTED The designated protocol is not supported.\r
+ @retval EFI_INVALID_PARAMTER Thisis NULL.\r
+ The StationIp address provided in DnsConfigData is not a\r
+ valid unicast.\r
+ DnsServerList is NULL while DnsServerListCount\r
+ is not ZERO.\r
+ DnsServerListCount is ZERO while DnsServerList\r
+ is not NULL\r
+ @retval EFI_OUT_OF_RESOURCES The DNS instance data or required space could not be\r
+ allocated.\r
+ @retval EFI_DEVICE_ERROR An unexpected system or network error occurred. The\r
+ EFI DNSv4 Protocol instance is not configured.\r
+ @retval EFI_ALREADY_STARTED Second call to Configure() with DnsConfigData. To\r
+ reconfigure the instance the caller must call Configure()\r
+ with NULL first to return driver to unconfigured state.\r
**/\r
EFI_STATUS\r
EFIAPI\r
);\r
\r
/**\r
- The function is used to translate the host name to host IP address. \r
- A type A query is used to get the one or more IP addresses for this host. \r
-\r
- @param[in] This Pointer to EFI_DNS4_PROTOCOL instance.\r
- @param[in] HostName Pointer to caller-supplied buffer containing Host name to be translated. \r
- This buffer contains 16 bit characters but these are translated to ASCII for use with \r
- DNSv4 server and there is no requirement for driver to support non-ASCII Unicode characters.\r
- @param[in] Token Pointer to the caller-allocated completion token to return at the completion of the process to translate host name to host address. \r
-\r
- @retval EFI_SUCCESS The operation completed successfully.\r
- @retval EFI_OUT_OF_RESOURCES Failed to allocate needed resources.\r
- @retval EFI_INVALID_PARAMETER This is NULL.\r
- Token is NULL.\r
- Token.Event is.NULL\r
- HostName is NULL\r
- @retval EFI_NO_MAPPING There's no source address is available for use.\r
- @retval EFI_NOT_STARTED This instance has not been started.\r
-\r
+ Host name to host address translation.\r
+\r
+ The HostNameToIp () function is used to translate the host name to host IP address. A\r
+ type A query is used to get the one or more IP addresses for this host.\r
+\r
+ @param[in] This Pointer to EFI_DNS4_PROTOCOL instance.\r
+ @param[in] HostName Host name.\r
+ @param[in] Token Point to the completion token to translate host name\r
+ to host address.\r
+\r
+ @retval EFI_SUCCESS The operation completed successfully.\r
+ @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:\r
+ This is NULL.\r
+ Token is NULL.\r
+ Token.Event is NULL.\r
+ HostName is NULL. HostName string is unsupported format.\r
+ @retval EFI_NO_MAPPING There's no source address is available for use.\r
+ @retval EFI_NOT_STARTED This instance has not been started.\r
**/\r
EFI_STATUS\r
EFIAPI\r
);\r
\r
/**\r
- The function is used to translate the host address to host name. \r
- A type PTR query is used to get the primary name of the host. \r
-\r
- @param[in] This Pointer to EFI_DNS4_PROTOCOL instance.\r
- @param[in] IpAddress IP address.\r
- @param[in] Token Pointer to the caller-allocated completion used token to translate host address to host name.\r
-\r
- @retval EFI_SUCCESS The operation completed successfully.\r
- @retval EFI_OUT_OF_RESOURCES Failed to allocate needed resources.\r
- @retval EFI_INVALID_PARAMETER This is NULL.\r
- Token is NULL.\r
- Token.Event is NULL.\r
- IpAddress is not valid IP address.\r
- @retval EFI_NO_MAPPING There's no source address is available for use.\r
- @retval EFI_NOT_STARTED This instance has not been started.\r
- @retval EFI_UNSUPPORTED This function is not supported.\r
-\r
+ IPv4 address to host name translation also known as Reverse DNS lookup.\r
+\r
+ The IpToHostName() function is used to translate the host address to host name. A type PTR\r
+ query is used to get the primary name of the host. Support of this function is optional.\r
+\r
+ @param[in] This Pointer to EFI_DNS4_PROTOCOL instance.\r
+ @param[in] IpAddress Ip Address.\r
+ @param[in] Token Point to the completion token to translate host\r
+ address to host name.\r
+\r
+ @retval EFI_SUCCESS The operation completed successfully.\r
+ @retval EFI_UNSUPPORTED This function is not supported.\r
+ @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:\r
+ This is NULL.\r
+ Token is NULL.\r
+ Token.Event is NULL.\r
+ IpAddress is not valid IP address .\r
+ @retval EFI_NO_MAPPING There's no source address is available for use.\r
+ @retval EFI_ALREADY_STARTED This Token is being used in another DNS session.\r
+ @retval EFI_OUT_OF_RESOURCES Failed to allocate needed resources.\r
**/\r
EFI_STATUS\r
EFIAPI\r
);\r
\r
/**\r
- This function retrieves arbitrary information from the DNS. \r
- The caller supplies a QNAME, QTYPE, and QCLASS, and all of the matching RRs are returned. \r
- All RR content (e.g., Ttl) was returned. \r
- The caller need parse the returned RR to get required information. This function is optional.\r
-\r
- @param[in] This Pointer to EFI_DNS4_PROTOCOL instance.\r
- @param[in] QName Pointer to Query Name.\r
- @param[in] QType Query Type.\r
- @param[in] QClass Query Name.\r
- @param[in] Token Point to the caller-allocated completion token to retrieve arbitrary information.\r
-\r
- @retval EFI_SUCCESS The operation completed successfully.\r
- @retval EFI_OUT_OF_RESOURCES Failed to allocate needed resources.\r
- @retval EFI_INVALID_PARAMETER This is NULL.\r
- Token is NULL.\r
- Token.Event is NULL.\r
- QName is NULL.\r
- @retval EFI_NO_MAPPING There's no source address is available for use.\r
- @retval EFI_ALREADY_STARTED This Token is being used in another DNS session.\r
- @retval EFI_UNSUPPORTED This function is not supported. Or the requested QType is not supported\r
-\r
+ Retrieve arbitrary information from the DNS server.\r
+\r
+ This GeneralLookup() function retrieves arbitrary information from the DNS. The caller\r
+ supplies a QNAME, QTYPE, and QCLASS, and all of the matching RRs are returned. All\r
+ RR content (e.g., TTL) was returned. The caller need parse the returned RR to get\r
+ required information. The function is optional.\r
+\r
+ @param[in] This Pointer to EFI_DNS4_PROTOCOL instance.\r
+ @param[in] QName Pointer to Query Name.\r
+ @param[in] QType Query Type.\r
+ @param[in] QClass Query Name.\r
+ @param[in] Token Point to the completion token to retrieve arbitrary\r
+ information.\r
+\r
+ @retval EFI_SUCCESS The operation completed successfully.\r
+ @retval EFI_UNSUPPORTED This function is not supported. Or the requested\r
+ QType is not supported\r
+ @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:\r
+ This is NULL.\r
+ Token is NULL.\r
+ Token.Event is NULL.\r
+ QName is NULL.\r
+ @retval EFI_NO_MAPPING There's no source address is available for use.\r
+ @retval EFI_ALREADY_STARTED This Token is being used in another DNS session.\r
+ @retval EFI_OUT_OF_RESOURCES Failed to allocate needed resources.\r
**/\r
EFI_STATUS\r
EFIAPI\r
Dns4GeneralLookUp (\r
IN EFI_DNS4_PROTOCOL *This,\r
IN CHAR8 *QName,\r
- IN UINT16 QType, \r
+ IN UINT16 QType,\r
IN UINT16 QClass,\r
IN EFI_DNS4_COMPLETION_TOKEN *Token\r
);\r
\r
/**\r
- This function is used to add/delete/modify DNS cache entry. \r
- DNS cache can be normally dynamically updated after the DNS resolve succeeds. \r
- This function provided capability to manually add/delete/modify the DNS cache.\r
-\r
- @param[in] This Pointer to EFI_DNS4_PROTOCOL instance.\r
- @param[in] DeleteFlag If FALSE, this function is to add one entry to the DNS Cache. \r
- If TRUE, this function will delete matching DNS Cache entry. \r
- @param[in] Override If TRUE, the matching DNS cache entry will be overwritten with the supplied parameter. \r
- If FALSE, EFI_ACCESS_DENIED will be returned if the entry to be added is already exists.\r
- @param[in] DnsCacheEntry Pointer to DNS Cache entry.\r
-\r
- @retval EFI_SUCCESS The operation completed successfully.\r
- @retval EFI_INVALID_PARAMETER This is NULL. \r
- DnsCacheEntry.HostName is NULL.\r
- DnsCacheEntry.IpAddress is NULL.\r
- DnsCacheEntry.Timeout is zero.\r
- @retval EFI_ACCESS_DENIED The DNS cache entry already exists and Override is not TRUE. \r
-\r
+ This function is to update the DNS Cache.\r
+\r
+ The UpdateDnsCache() function is used to add/delete/modify DNS cache entry. DNS cache\r
+ can be normally dynamically updated after the DNS resolve succeeds. This function\r
+ provided capability to manually add/delete/modify the DNS cache.\r
+\r
+ @param[in] This Pointer to EFI_DNS4_PROTOCOL instance.\r
+ @param[in] DeleteFlag If FALSE, this function is to add one entry to the\r
+ DNS Cahce. If TRUE, this function will delete\r
+ matching DNS Cache entry.\r
+ @param[in] Override If TRUE, the maching DNS cache entry will be\r
+ overwritten with the supplied parameter. If FALSE,\r
+ EFI_ACCESS_DENIED will be returned if the entry to\r
+ be added is already existed.\r
+ @param[in] DnsCacheEntry Pointer to DNS Cache entry.\r
+\r
+ @retval EFI_SUCCESS The operation completed successfully.\r
+ @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:\r
+ This is NULL.\r
+ DnsCacheEntry.HostName is NULL.\r
+ DnsCacheEntry.IpAddress is NULL.\r
+ DnsCacheEntry.Timeout is zero.\r
+ @retval EFI_ACCESS_DENIED The DNS cache entry already exists and Override is\r
+ not TRUE.\r
**/\r
EFI_STATUS\r
EFIAPI\r
);\r
\r
/**\r
- This function can be used by network drivers and applications to increase the rate that data packets are moved between \r
- the communications device and the transmit and receive queues. In some systems, the periodic timer event in the managed \r
- network driver may not poll the underlying communications device fast enough to transmit and/or receive all data packets \r
- without missing incoming packets or dropping outgoing packets.\r
-\r
- @param[in] This Pointer to EFI_DNS4_PROTOCOL instance.\r
-\r
- @retval EFI_SUCCESS Incoming or outgoing data was processed.\r
- @retval EFI_INVALID_PARAMETER This is NULL. \r
- @retval EFI_NOT_STARTED This EFI DNS Protocol instance has not been started. \r
- @retval EFI_DEVICE_ERROR An unexpected system or network error occurred. \r
- @retval EFI_TIMEOUT Data was dropped out of the transmit and/or receive queue. \r
- Consider increasing the polling rate.\r
- \r
+ Polls for incoming data packets and processes outgoing data packets.\r
+\r
+ The Poll() function can be used by network drivers and applications to increase the\r
+ rate that data packets are moved between the communications device and the transmit\r
+ and receive queues.\r
+ In some systems, the periodic timer event in the managed network driver may not poll\r
+ the underlying communications device fast enough to transmit and/or receive all data\r
+ packets without missing incoming packets or dropping outgoing packets. Drivers and\r
+ applications that are experiencing packet loss should try calling the Poll()\r
+ function more often.\r
+\r
+ @param[in] This Pointer to EFI_DNS4_PROTOCOL instance.\r
+\r
+ @retval EFI_SUCCESS Incoming or outgoing data was processed.\r
+ @retval EFI_NOT_STARTED This EFI DNS Protocol instance has not been started.\r
+ @retval EFI_INVALID_PARAMETER This is NULL.\r
+ @retval EFI_DEVICE_ERROR An unexpected system or network error occurred.\r
+ @retval EFI_TIMEOUT Data was dropped out of the transmit and/or receive\r
+ queue. Consider increasing the polling rate.\r
**/\r
EFI_STATUS\r
EFIAPI\r
);\r
\r
/**\r
- This function is used to abort a pending resolution request. \r
- After calling this function, Token.Status will be set to EFI_ABORTED and then Token.\r
-\r
- @param[in] This Pointer to EFI_DNS4_PROTOCOL instance.\r
- @param[in] Token Pointer to a token that has been issued by EFI_DNS4_PROTOCOL.HostNameToIp(), \r
- EFI_DNS4_PROTOCOL.IpToHostName() or EFI_DNS4_PROTOCOL.GeneralLookup(). \r
- If NULL, all pending tokens are aborted.\r
-\r
- @retval EFI_SUCCESS Incoming or outgoing data was processed.\r
- @retval EFI_INVALID_PARAMETER This is NULL. \r
- @retval EFI_NOT_STARTED This EFI DNS Protocol instance has not been started. \r
- @retval EFI_NOT_FOUND When Token is not NULL, and the asynchronous DNS operation was not found in the transmit queue. \r
- It was either completed or was not issued by HostNameToIp(), IpToHostName() or GeneralLookup().\r
- \r
+ Abort an asynchronous DNS operation, including translation between IP and Host, and\r
+ general look up behavior.\r
+\r
+ The Cancel() function is used to abort a pending resolution request. After calling\r
+ this function, Token.Status will be set to EFI_ABORTED and then Token.Event will be\r
+ signaled. If the token is not in one of the queues, which usually means that the\r
+ asynchronous operation has completed, this function will not signal the token and\r
+ EFI_NOT_FOUND is returned.\r
+\r
+ @param[in] This Pointer to EFI_DNS4_PROTOCOL instance.\r
+ @param[in] Token Pointer to a token that has been issued by\r
+ EFI_DNS4_PROTOCOL.HostNameToIp (),\r
+ EFI_DNS4_PROTOCOL.IpToHostName() or\r
+ EFI_DNS4_PROTOCOL.GeneralLookup().\r
+ If NULL, all pending tokens are aborted.\r
+\r
+ @retval EFI_SUCCESS Incoming or outgoing data was processed.\r
+ @retval EFI_NOT_STARTED This EFI DNS4 Protocol instance has not been started.\r
+ @retval EFI_INVALID_PARAMETER This is NULL.\r
+ @retval EFI_NOT_FOUND When Token is not NULL, and the asynchronous DNS\r
+ operation was not found in the transmit queue. It\r
+ was either completed or was not issued by\r
+ HostNameToIp(), IpToHostName() or GeneralLookup().\r
**/\r
EFI_STATUS\r
EFIAPI\r
\r
\r
/**\r
- This function is used to retrieve DNS mode data for this DNS instance.\r
+ Retrieve mode data of this DNS instance.\r
\r
- @param[in] This Pointer to EFI_DNS6_PROTOCOL instance.\r
- @param[out] DnsModeData Pointer to the caller-allocated storage for the EFI_DNS6_MODE_DATA structure.\r
+ This function is used to retrieve DNS mode data for this DNS instance.\r
\r
- @retval EFI_SUCCESS The operation completed successfully.\r
- @retval EFI_NOT_STARTED When DnsConfigData is queried, no configuration data is \r
- available because this instance has not been configured.\r
- @retval EFI_OUT_OF_RESOURCES Failed to allocate needed resources.\r
- @retval EFI_INVALID_PARAMETER This is NULL or DnsModeData is NULL.\r
+ @param[in] This Pointer to EFI_DNS6_PROTOCOL instance.\r
+ @param[out] DnsModeData Pointer to the caller-allocated storage for the\r
+ EFI_DNS6_MODE_DATA data.\r
\r
+ @retval EFI_SUCCESS The operation completed successfully.\r
+ @retval EFI_NOT_STARTED When DnsConfigData is queried, no configuration data\r
+ is available because this instance has not been\r
+ configured.\r
+ @retval EFI_INVALID_PARAMETER This is NULL or DnsModeData is NULL.\r
+ @retval EFI_OUT_OF_RESOURCE Failed to allocate needed resources.\r
**/\r
EFI_STATUS\r
EFIAPI\r
);\r
\r
/**\r
- The function is used to set and change the configuration data for this EFI DNSv6 Protocol driver instance. \r
- Reset the DNS instance if DnsConfigData is NULL.\r
-\r
- @param[in] This Pointer to EFI_DNS6_PROTOCOL instance.\r
- @param[in] DnsConfigData Pointer to the configuration data structure. \r
- All associated storage to be allocated and released by caller.\r
-\r
- @retval EFI_SUCCESS The operation completed successfully.\r
- @retval EFI_UNSUPPORTED The designated protocol is not supported.\r
- @retval EFI_OUT_OF_RESOURCES Failed to allocate needed resources.\r
- @retval EFI_INVALID_PARAMETER This is NULL.\r
- The StationIp address provided in DnsConfigData is not a valid unicast.\r
- DnsServerList is NULL while DnsServerListCount is not equal to Zero.\r
- DnsServerListCount is Zero while DnsServerList is not equal to NULL.\r
- @retval EFI_DEVICE_ERROR An unexpected system or network error occurred. The EFI DNSv6 Protocol instance is not configured.\r
-\r
+ Configure this DNS instance.\r
+\r
+ The Configure() function is used to set and change the configuration data for this\r
+ EFI DNSv6 Protocol driver instance. Reset the DNS instance if DnsConfigData is NULL.\r
+\r
+ @param[in] This Pointer to EFI_DNS6_PROTOCOL instance.\r
+ @param[in] DnsConfigData Pointer to the configuration data structure. All associated\r
+ storage to be allocated and released by caller.\r
+\r
+ @retval EFI_SUCCESS The operation completed successfully.\r
+ @retval EFI_INVALID_PARAMTER This is NULL.\r
+ The StationIp address provided in DnsConfigData is not zero and not a valid unicast.\r
+ DnsServerList is NULL while DnsServerList Count is not ZERO.\r
+ DnsServerList Count is ZERO while DnsServerList is not NULL.\r
+ @retval EFI_OUT_OF_RESOURCES The DNS instance data or required space could not be allocated.\r
+ @retval EFI_DEVICE_ERROR An unexpected system or network error occurred. The\r
+ EFI DNSv6 Protocol instance is not configured.\r
+ @retval EFI_UNSUPPORTED The designated protocol is not supported.\r
+ @retval EFI_ALREADY_STARTED Second call to Configure() with DnsConfigData. To\r
+ reconfigure the instance the caller must call Configure() with\r
+ NULL first to return driver to unconfigured state.\r
**/\r
EFI_STATUS\r
EFIAPI\r
);\r
\r
/**\r
- The function is used to translate the host name to host IP address. \r
- A type AAAA query is used to get the one or more IPv6 addresses for this host. \r
-\r
- @param[in] This Pointer to EFI_DNS6_PROTOCOL instance.\r
- @param[in] HostName Pointer to caller-supplied buffer containing Host name to be translated. \r
- This buffer contains 16 bit characters but these are translated to ASCII for use with \r
- DNSv4 server and there is no requirement for driver to support non-ASCII Unicode characters.\r
- @param[in] Token Pointer to the caller-allocated completion token to return at the completion of the process to translate host name to host address. \r
-\r
- @retval EFI_SUCCESS The operation completed successfully.\r
- @retval EFI_OUT_OF_RESOURCES Failed to allocate needed resources.\r
- @retval EFI_INVALID_PARAMETER This is NULL.\r
- Token is NULL.\r
- Token.Event is.NULL\r
- HostName is NULL\r
- @retval EFI_NO_MAPPING There's no source address is available for use.\r
- @retval EFI_NOT_STARTED This instance has not been started.\r
-\r
+ Host name to host address translation.\r
+\r
+ The HostNameToIp () function is used to translate the host name to host IP address. A\r
+ type AAAA query is used to get the one or more IPv6 addresses for this host.\r
+\r
+ @param[in] This Pointer to EFI_DNS6_PROTOCOL instance.\r
+ @param[in] HostName Host name.\r
+ @param[in] Token Point to the completion token to translate host name\r
+ to host address.\r
+\r
+ @retval EFI_SUCCESS The operation completed successfully.\r
+ @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:\r
+ This is NULL.\r
+ Token is NULL.\r
+ Token.Event is NULL.\r
+ HostName is NULL or buffer contained unsupported characters.\r
+ @retval EFI_NO_MAPPING There's no source address is available for use.\r
+ @retval EFI_ALREADY_STARTED This Token is being used in another DNS session.\r
+ @retval EFI_NOT_STARTED This instance has not been started.\r
+ @retval EFI_OUT_OF_RESOURCES Failed to allocate needed resources.\r
**/\r
EFI_STATUS\r
EFIAPI\r
);\r
\r
/**\r
- The function is used to translate the host address to host name. \r
- A type PTR query is used to get the primary name of the host. \r
-\r
- @param[in] This Pointer to EFI_DNS6_PROTOCOL instance.\r
- @param[in] IpAddress IP address.\r
- @param[in] Token Pointer to the caller-allocated completion used token to translate host address to host name.\r
-\r
- @retval EFI_SUCCESS The operation completed successfully.\r
- @retval EFI_OUT_OF_RESOURCES Failed to allocate needed resources.\r
- @retval EFI_INVALID_PARAMETER This is NULL.\r
- Token is NULL.\r
- Token.Event is NULL.\r
- IpAddress is not valid IP address.\r
- @retval EFI_NO_MAPPING There's no source address is available for use.\r
- @retval EFI_NOT_STARTED This instance has not been started.\r
- @retval EFI_UNSUPPORTED This function is not supported.\r
-\r
+ Host address to host name translation.\r
+\r
+ The IpToHostName () function is used to translate the host address to host name. A\r
+ type PTR query is used to get the primary name of the host. Implementation can choose\r
+ to support this function or not.\r
+\r
+ @param[in] This Pointer to EFI_DNS6_PROTOCOL instance.\r
+ @param[in] IpAddress Ip Address.\r
+ @param[in] Token Point to the completion token to translate host\r
+ address to host name.\r
+\r
+ @retval EFI_SUCCESS The operation completed successfully.\r
+ @retval EFI_UNSUPPORTED This function is not supported.\r
+ @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:\r
+ This is NULL.\r
+ Token is NULL.\r
+ Token.Event is NULL.\r
+ IpAddress is not valid IP address.\r
+ @retval EFI_NO_MAPPING There's no source address is available for use.\r
+ @retval EFI_NOT_STARTED This instance has not been started.\r
+ @retval EFI_OUT_OF_RESOURCES Failed to allocate needed resources.\r
**/\r
EFI_STATUS\r
EFIAPI\r
);\r
\r
/**\r
- This function retrieves arbitrary information from the DNS. \r
- The caller supplies a QNAME, QTYPE, and QCLASS, and all of the matching RRs are returned. \r
- All RR content (e.g., Ttl) was returned. \r
- The caller need parse the returned RR to get required information. This function is optional.\r
-\r
- @param[in] This Pointer to EFI_DNS6_PROTOCOL instance.\r
- @param[in] QName Pointer to Query Name.\r
- @param[in] QType Query Type.\r
- @param[in] QClass Query Name.\r
- @param[in] Token Point to the caller-allocated completion token to retrieve arbitrary information.\r
-\r
- @retval EFI_SUCCESS The operation completed successfully.\r
- @retval EFI_OUT_OF_RESOURCES Failed to allocate needed resources.\r
- @retval EFI_INVALID_PARAMETER This is NULL.\r
- Token is NULL.\r
- Token.Event is NULL.\r
- QName is NULL.\r
- @retval EFI_NO_MAPPING There's no source address is available for use.\r
- @retval EFI_NOT_STARTED This instance has not been started.\r
- @retval EFI_UNSUPPORTED This function is not supported. Or the requested QType is not supported\r
-\r
+ This function provides capability to retrieve arbitrary information from the DNS\r
+ server.\r
+\r
+ This GeneralLookup() function retrieves arbitrary information from the DNS. The caller\r
+ supplies a QNAME, QTYPE, and QCLASS, and all of the matching RRs are returned. All\r
+ RR content (e.g., TTL) was returned. The caller need parse the returned RR to get\r
+ required information. The function is optional. Implementation can choose to support\r
+ it or not.\r
+\r
+ @param[in] This Pointer to EFI_DNS6_PROTOCOL instance.\r
+ @param[in] QName Pointer to Query Name.\r
+ @param[in] QType Query Type.\r
+ @param[in] QClass Query Name.\r
+ @param[in] Token Point to the completion token to retrieve arbitrary\r
+ information.\r
+\r
+ @retval EFI_SUCCESS The operation completed successfully.\r
+ @retval EFI_UNSUPPORTED This function is not supported. Or the requested\r
+ QType is not supported\r
+ @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:\r
+ This is NULL.\r
+ Token is NULL.\r
+ Token.Event is NULL.\r
+ QName is NULL.\r
+ @retval EFI_NO_MAPPING There's no source address is available for use.\r
+ @retval EFI_NOT_STARTED This instance has not been started.\r
+ @retval EFI_OUT_OF_RESOURCES Failed to allocate needed resources.\r
**/\r
EFI_STATUS\r
EFIAPI\r
Dns6GeneralLookUp (\r
IN EFI_DNS6_PROTOCOL *This,\r
IN CHAR8 *QName,\r
- IN UINT16 QType, \r
+ IN UINT16 QType,\r
IN UINT16 QClass,\r
IN EFI_DNS6_COMPLETION_TOKEN *Token\r
);\r
\r
/**\r
- This function is used to add/delete/modify DNS cache entry. \r
- DNS cache can be normally dynamically updated after the DNS resolve succeeds. \r
- This function provided capability to manually add/delete/modify the DNS cache.\r
-\r
- @param[in] This Pointer to EFI_DNS6_PROTOCOL instance.\r
- @param[in] DeleteFlag If FALSE, this function is to add one entry to the DNS Cache. \r
- If TRUE, this function will delete matching DNS Cache entry. \r
- @param[in] Override If TRUE, the matching DNS cache entry will be overwritten with the supplied parameter. \r
- If FALSE, EFI_ACCESS_DENIED will be returned if the entry to be added is already exists.\r
- @param[in] DnsCacheEntry Pointer to DNS Cache entry.\r
-\r
- @retval EFI_SUCCESS The operation completed successfully.\r
- @retval EFI_INVALID_PARAMETER This is NULL. \r
- DnsCacheEntry.HostName is NULL.\r
- DnsCacheEntry.IpAddress is NULL.\r
- DnsCacheEntry.Timeout is zero.\r
- @retval EFI_ACCESS_DENIED The DNS cache entry already exists and Override is not TRUE. \r
-\r
+ This function is to update the DNS Cache.\r
+\r
+ The UpdateDnsCache() function is used to add/delete/modify DNS cache entry. DNS cache\r
+ can be normally dynamically updated after the DNS resolve succeeds. This function\r
+ provided capability to manually add/delete/modify the DNS cache.\r
+\r
+ @param[in] This Pointer to EFI_DNS6_PROTOCOL instance.\r
+ @param[in] DeleteFlag If FALSE, this function is to add one entry to the\r
+ DNS Cahce. If TRUE, this function will delete\r
+ matching DNS Cache entry.\r
+ @param[in] Override If TRUE, the maching DNS cache entry will be\r
+ overwritten with the supplied parameter. If FALSE,\r
+ EFI_ACCESS_DENIED will be returned if the entry to\r
+ be added is already existed.\r
+ @param[in] DnsCacheEntry Pointer to DNS Cache entry.\r
+\r
+ @retval EFI_SUCCESS The operation completed successfully.\r
+ @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:\r
+ This is NULL.\r
+ DnsCacheEntry.HostName is NULL.\r
+ DnsCacheEntry.IpAddress is NULL.\r
+ DnsCacheEntry.Timeout is zero.\r
+ @retval EFI_ACCESS_DENIED The DNS cache entry already exists and Override is\r
+ not TRUE.\r
+ @retval EFI_OUT_OF_RESOURCE Failed to allocate needed resources.\r
**/\r
EFI_STATUS\r
EFIAPI\r
);\r
\r
/**\r
- This function can be used by network drivers and applications to increase the rate that data packets are moved between \r
- the communications device and the transmit and receive queues. In some systems, the periodic timer event in the managed \r
- network driver may not poll the underlying communications device fast enough to transmit and/or receive all data packets \r
- without missing incoming packets or dropping outgoing packets.\r
-\r
- @param[in] This Pointer to EFI_DNS6_PROTOCOL instance.\r
-\r
- @retval EFI_SUCCESS Incoming or outgoing data was processed.\r
- @retval EFI_INVALID_PARAMETER This is NULL. \r
- @retval EFI_NOT_STARTED This EFI DNS Protocol instance has not been started. \r
- @retval EFI_DEVICE_ERROR An unexpected system or network error occurred. \r
- @retval EFI_TIMEOUT Data was dropped out of the transmit and/or receive queue. \r
- Consider increasing the polling rate.\r
- \r
+ Polls for incoming data packets and processes outgoing data packets.\r
+\r
+ The Poll() function can be used by network drivers and applications to increase the\r
+ rate that data packets are moved between the communications device and the transmit\r
+ and receive queues.\r
+\r
+ In some systems, the periodic timer event in the managed network driver may not poll\r
+ the underlying communications device fast enough to transmit and/or receive all data\r
+ packets without missing incoming packets or dropping outgoing packets. Drivers and\r
+ applications that are experiencing packet loss should try calling the Poll()\r
+ function more often.\r
+\r
+ @param[in] This Pointer to EFI_DNS6_PROTOCOL instance.\r
+\r
+ @retval EFI_SUCCESS Incoming or outgoing data was processed.\r
+ @retval EFI_NOT_STARTED This EFI DNS Protocol instance has not been started.\r
+ @retval EFI_INVALID_PARAMETER This is NULL.\r
+ @retval EFI_NO_MAPPING There is no source address is available for use.\r
+ @retval EFI_DEVICE_ERROR An unexpected system or network error occurred.\r
+ @retval EFI_TIMEOUT Data was dropped out of the transmit and/or receive\r
+ queue. Consider increasing the polling rate.\r
**/\r
EFI_STATUS\r
EFIAPI\r
);\r
\r
/**\r
- This function is used to abort a pending resolution request. \r
- After calling this function, Token.Status will be set to EFI_ABORTED and then Token.\r
-\r
- @param[in] This Pointer to EFI_DNS6_PROTOCOL instance.\r
- @param[in] Token Pointer to a token that has been issued by EFI_DNS6_PROTOCOL.HostNameToIp(), \r
- EFI_DNS6_PROTOCOL.IpToHostName() or EFI_DNS6_PROTOCOL.GeneralLookup(). \r
- If NULL, all pending tokens are aborted.\r
-\r
- @retval EFI_SUCCESS Incoming or outgoing data was processed.\r
- @retval EFI_INVALID_PARAMETER This is NULL. \r
- @retval EFI_NOT_STARTED This EFI DNS Protocol instance has not been started. \r
- @retval EFI_NOT_FOUND When Token is not NULL, and the asynchronous DNS operation was not found in the transmit queue. \r
- It was either completed or was not issued by HostNameToIp(), IpToHostName() or GeneralLookup().\r
- \r
+ Abort an asynchronous DNS operation, including translation between IP and Host, and\r
+ general look up behavior.\r
+\r
+ The Cancel() function is used to abort a pending resolution request. After calling\r
+ this function, Token.Status will be set to EFI_ABORTED and then Token.Event will be\r
+ signaled. If the token is not in one of the queues, which usually means that the\r
+ asynchronous operation has completed, this function will not signal the token and\r
+ EFI_NOT_FOUND is returned.\r
+\r
+ @param[in] This Pointer to EFI_DNS6_PROTOCOL instance.\r
+ @param[in] Token Pointer to a token that has been issued by\r
+ EFI_DNS6_PROTOCOL.HostNameToIp (),\r
+ EFI_DNS6_PROTOCOL.IpToHostName() or\r
+ EFI_DNS6_PROTOCOL.GeneralLookup().\r
+ If NULL, all pending tokens are aborted.\r
+\r
+ @retval EFI_SUCCESS Incoming or outgoing data was processed.\r
+ @retval EFI_NOT_STARTED This EFI DNS6 Protocol instance has not been started.\r
+ @retval EFI_INVALID_PARAMETER This is NULL.\r
+ @retval EFI_NO_MAPPING There's no source address is available for use.\r
+ @retval EFI_NOT_FOUND When Token is not NULL, and the asynchronous DNS\r
+ operation was not found in the transmit queue. It\r
+ was either completed or was not issued by\r
+ HostNameToIp(), IpToHostName() or GeneralLookup().\r
**/\r
EFI_STATUS\r
EFIAPI\r