/** @file\r
The header files of the driver binding and service binding protocol for HttpDxe driver.\r
\r
- Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>\r
+ Copyright (c) 2015 - 2021, Intel Corporation. All rights reserved.<BR>\r
+ (C) Copyright 2016 Hewlett Packard Enterprise Development LP<BR>\r
\r
- This program and the accompanying materials\r
- are licensed and made available under the terms and conditions of the BSD License\r
- which accompanies this distribution. The full text of the license may be found at\r
- http://opensource.org/licenses/bsd-license.php.\r
-\r
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
+ SPDX-License-Identifier: BSD-2-Clause-Patent\r
\r
**/\r
\r
#define __EFI_HTTP_DRIVER_H__\r
\r
#include <Uefi.h>\r
+#include <IndustryStandard/Http11.h>\r
\r
//\r
// Libraries\r
//\r
#include <Library/UefiBootServicesTableLib.h>\r
+#include <Library/UefiRuntimeServicesTableLib.h>\r
#include <Library/MemoryAllocationLib.h>\r
#include <Library/BaseLib.h>\r
#include <Library/UefiLib.h>\r
#include <Library/DebugLib.h>\r
#include <Library/NetLib.h>\r
#include <Library/HttpLib.h>\r
-#include <Library/TcpIoLib.h>\r
+#include <Library/DpcLib.h>\r
\r
//\r
// UEFI Driver Model Protocols\r
//\r
#include <Protocol/HttpUtilities.h>\r
#include <Protocol/Tcp4.h>\r
+#include <Protocol/Tcp6.h>\r
#include <Protocol/Dns4.h>\r
+#include <Protocol/Dns6.h>\r
#include <Protocol/Ip4Config2.h>\r
+#include <Protocol/Ip6Config.h>\r
+#include <Protocol/Tls.h>\r
+#include <Protocol/TlsConfig.h>\r
+#include <Protocol/HttpCallback.h>\r
\r
+#include <Guid/ImageAuthentication.h>\r
//\r
// Produced Protocols\r
//\r
#include <Protocol/Http.h>\r
\r
+#include <Guid/TlsAuthentication.h>\r
+#include <Guid/HttpTlsCipherList.h>\r
+\r
+#include <IndustryStandard/Tls1.h>\r
+\r
//\r
// Driver Version\r
//\r
-#define HTTP_DRIVER_VERSION 0xa\r
+#define HTTP_DRIVER_VERSION 0xa\r
\r
//\r
// Protocol instances\r
//\r
-extern EFI_DRIVER_BINDING_PROTOCOL gHttpDxeDriverBinding;\r
-extern EFI_COMPONENT_NAME2_PROTOCOL gHttpDxeComponentName2;\r
-extern EFI_COMPONENT_NAME_PROTOCOL gHttpDxeComponentName;\r
+extern EFI_DRIVER_BINDING_PROTOCOL gHttpDxeIp4DriverBinding;\r
+extern EFI_DRIVER_BINDING_PROTOCOL gHttpDxeIp6DriverBinding;\r
+\r
+extern EFI_COMPONENT_NAME2_PROTOCOL gHttpDxeComponentName2;\r
+extern EFI_COMPONENT_NAME_PROTOCOL gHttpDxeComponentName;\r
\r
extern EFI_HTTP_UTILITIES_PROTOCOL *mHttpUtilities;\r
\r
#include "ComponentName.h"\r
#include "HttpImpl.h"\r
#include "HttpProto.h"\r
+#include "HttpsSupport.h"\r
#include "HttpDns.h"\r
\r
typedef struct {\r
- EFI_SERVICE_BINDING_PROTOCOL *ServiceBinding;\r
- UINTN NumberOfChildren;\r
- EFI_HANDLE *ChildHandleBuffer;\r
+ EFI_SERVICE_BINDING_PROTOCOL *ServiceBinding;\r
+ UINTN NumberOfChildren;\r
+ EFI_HANDLE *ChildHandleBuffer;\r
} HTTP_DESTROY_CHILD_IN_HANDLE_BUF_CONTEXT;\r
\r
/**\r
- Tests to see if this driver supports a given controller. If a child device is provided, \r
+ Tests to see if this driver supports a given controller. If a child device is provided,\r
it further tests to see if this driver supports creating a handle for the specified child device.\r
\r
- This function checks to see if the driver specified by This supports the device specified by \r
- ControllerHandle. Drivers will typically use the device path attached to \r
- ControllerHandle and/or the services from the bus I/O abstraction attached to \r
- ControllerHandle to determine if the driver supports ControllerHandle. This function \r
- may be called many times during platform initialization. In order to reduce boot times, the tests \r
- performed by this function must be very small, and take as little time as possible to execute. This \r
- function must not change the state of any hardware devices, and this function must be aware that the \r
- device specified by ControllerHandle may already be managed by the same driver or a \r
- different driver. This function must match its calls to AllocatePages() with FreePages(), \r
- AllocatePool() with FreePool(), and OpenProtocol() with CloseProtocol(). \r
- Because ControllerHandle may have been previously started by the same driver, if a protocol is \r
- already in the opened state, then it must not be closed with CloseProtocol(). This is required \r
+ This function checks to see if the driver specified by This supports the device specified by\r
+ ControllerHandle. Drivers will typically use the device path attached to\r
+ ControllerHandle and/or the services from the bus I/O abstraction attached to\r
+ ControllerHandle to determine if the driver supports ControllerHandle. This function\r
+ may be called many times during platform initialization. In order to reduce boot times, the tests\r
+ performed by this function must be very small, and take as little time as possible to execute. This\r
+ function must not change the state of any hardware devices, and this function must be aware that the\r
+ device specified by ControllerHandle may already be managed by the same driver or a\r
+ different driver. This function must match its calls to AllocatePages() with FreePages(),\r
+ AllocatePool() with FreePool(), and OpenProtocol() with CloseProtocol().\r
+ Because ControllerHandle may have been previously started by the same driver, if a protocol is\r
+ already in the opened state, then it must not be closed with CloseProtocol(). This is required\r
to guarantee the state of ControllerHandle is not modified by this function.\r
\r
@param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.\r
- @param[in] ControllerHandle The handle of the controller to test. This handle \r
- must support a protocol interface that supplies \r
+ @param[in] ControllerHandle The handle of the controller to test. This handle\r
+ must support a protocol interface that supplies\r
an I/O abstraction to the driver.\r
- @param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This \r
- parameter is ignored by device drivers, and is optional for bus \r
- drivers. For bus drivers, if this parameter is not NULL, then \r
- the bus driver must determine if the bus controller specified \r
- by ControllerHandle and the child controller specified \r
- by RemainingDevicePath are both supported by this \r
+ @param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This\r
+ parameter is ignored by device drivers, and is optional for bus\r
+ drivers. For bus drivers, if this parameter is not NULL, then\r
+ the bus driver must determine if the bus controller specified\r
+ by ControllerHandle and the child controller specified\r
+ by RemainingDevicePath are both supported by this\r
bus driver.\r
\r
@retval EFI_SUCCESS The device specified by ControllerHandle and\r
**/\r
EFI_STATUS\r
EFIAPI\r
-HttpDxeDriverBindingSupported (\r
+HttpDxeIp4DriverBindingSupported (\r
IN EFI_DRIVER_BINDING_PROTOCOL *This,\r
IN EFI_HANDLE ControllerHandle,\r
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath OPTIONAL\r
Starts a device controller or a bus controller.\r
\r
The Start() function is designed to be invoked from the EFI boot service ConnectController().\r
- As a result, much of the error checking on the parameters to Start() has been moved into this \r
- common boot service. It is legal to call Start() from other locations, \r
+ As a result, much of the error checking on the parameters to Start() has been moved into this\r
+ common boot service. It is legal to call Start() from other locations,\r
but the following calling restrictions must be followed, or the system behavior will not be deterministic.\r
1. ControllerHandle must be a valid EFI_HANDLE.\r
2. If RemainingDevicePath is not NULL, then it must be a pointer to a naturally aligned\r
EFI_DEVICE_PATH_PROTOCOL.\r
3. Prior to calling Start(), the Supported() function for the driver specified by This must\r
- have been called with the same calling parameters, and Supported() must have returned EFI_SUCCESS. \r
+ have been called with the same calling parameters, and Supported() must have returned EFI_SUCCESS.\r
\r
@param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.\r
- @param[in] ControllerHandle The handle of the controller to start. This handle \r
- must support a protocol interface that supplies \r
+ @param[in] ControllerHandle The handle of the controller to start. This handle\r
+ must support a protocol interface that supplies\r
an I/O abstraction to the driver.\r
- @param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This \r
- parameter is ignored by device drivers, and is optional for bus \r
- drivers. For a bus driver, if this parameter is NULL, then handles \r
- for all the children of Controller are created by this driver. \r
- If this parameter is not NULL and the first Device Path Node is \r
- not the End of Device Path Node, then only the handle for the \r
- child device specified by the first Device Path Node of \r
+ @param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This\r
+ parameter is ignored by device drivers, and is optional for bus\r
+ drivers. For a bus driver, if this parameter is NULL, then handles\r
+ for all the children of Controller are created by this driver.\r
+ If this parameter is not NULL and the first Device Path Node is\r
+ not the End of Device Path Node, then only the handle for the\r
+ child device specified by the first Device Path Node of\r
RemainingDevicePath is created by this driver.\r
- If the first Device Path Node of RemainingDevicePath is \r
+ If the first Device Path Node of RemainingDevicePath is\r
the End of Device Path Node, no child handle is created by this\r
driver.\r
\r
@retval EFI_SUCCESS The device was started.\r
@retval EFI_DEVICE_ERROR The device could not be started due to a device error.Currently not implemented.\r
@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.\r
- @retval Others The driver failded to start the device.\r
+ @retval Others The driver failed to start the device.\r
\r
**/\r
EFI_STATUS\r
EFIAPI\r
-HttpDxeDriverBindingStart (\r
+HttpDxeIp4DriverBindingStart (\r
IN EFI_DRIVER_BINDING_PROTOCOL *This,\r
IN EFI_HANDLE ControllerHandle,\r
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath OPTIONAL\r
\r
/**\r
Stops a device controller or a bus controller.\r
- \r
- The Stop() function is designed to be invoked from the EFI boot service DisconnectController(). \r
- As a result, much of the error checking on the parameters to Stop() has been moved \r
- into this common boot service. It is legal to call Stop() from other locations, \r
+\r
+ The Stop() function is designed to be invoked from the EFI boot service DisconnectController().\r
+ As a result, much of the error checking on the parameters to Stop() has been moved\r
+ into this common boot service. It is legal to call Stop() from other locations,\r
but the following calling restrictions must be followed, or the system behavior will not be deterministic.\r
1. ControllerHandle must be a valid EFI_HANDLE that was used on a previous call to this\r
same driver's Start() function.\r
EFI_HANDLE. In addition, all of these handles must have been created in this driver's\r
Start() function, and the Start() function must have called OpenProtocol() on\r
ControllerHandle with an Attribute of EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER.\r
- \r
+\r
@param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.\r
- @param[in] ControllerHandle A handle to the device being stopped. The handle must \r
- support a bus specific I/O protocol for the driver \r
+ @param[in] ControllerHandle A handle to the device being stopped. The handle must\r
+ support a bus specific I/O protocol for the driver\r
to use to stop the device.\r
@param[in] NumberOfChildren The number of child device handles in ChildHandleBuffer.\r
- @param[in] ChildHandleBuffer An array of child handles to be freed. May be NULL \r
+ @param[in] ChildHandleBuffer An array of child handles to be freed. May be NULL\r
if NumberOfChildren is 0.\r
\r
@retval EFI_SUCCESS The device was stopped.\r
**/\r
EFI_STATUS\r
EFIAPI\r
-HttpDxeDriverBindingStop (\r
+HttpDxeIp4DriverBindingStop (\r
IN EFI_DRIVER_BINDING_PROTOCOL *This,\r
IN EFI_HANDLE ControllerHandle,\r
IN UINTN NumberOfChildren,\r
IN EFI_HANDLE *ChildHandleBuffer OPTIONAL\r
);\r
\r
+/**\r
+ Tests to see if this driver supports a given controller. If a child device is provided,\r
+ it further tests to see if this driver supports creating a handle for the specified child device.\r
+\r
+ This function checks to see if the driver specified by This supports the device specified by\r
+ ControllerHandle. Drivers will typically use the device path attached to\r
+ ControllerHandle and/or the services from the bus I/O abstraction attached to\r
+ ControllerHandle to determine if the driver supports ControllerHandle. This function\r
+ may be called many times during platform initialization. In order to reduce boot times, the tests\r
+ performed by this function must be very small, and take as little time as possible to execute. This\r
+ function must not change the state of any hardware devices, and this function must be aware that the\r
+ device specified by ControllerHandle may already be managed by the same driver or a\r
+ different driver. This function must match its calls to AllocatePages() with FreePages(),\r
+ AllocatePool() with FreePool(), and OpenProtocol() with CloseProtocol().\r
+ Because ControllerHandle may have been previously started by the same driver, if a protocol is\r
+ already in the opened state, then it must not be closed with CloseProtocol(). This is required\r
+ to guarantee the state of ControllerHandle is not modified by this function.\r
+\r
+ @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.\r
+ @param[in] ControllerHandle The handle of the controller to test. This handle\r
+ must support a protocol interface that supplies\r
+ an I/O abstraction to the driver.\r
+ @param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This\r
+ parameter is ignored by device drivers, and is optional for bus\r
+ drivers. For bus drivers, if this parameter is not NULL, then\r
+ the bus driver must determine if the bus controller specified\r
+ by ControllerHandle and the child controller specified\r
+ by RemainingDevicePath are both supported by this\r
+ bus driver.\r
+\r
+ @retval EFI_SUCCESS The device specified by ControllerHandle and\r
+ RemainingDevicePath is supported by the driver specified by This.\r
+ @retval EFI_ALREADY_STARTED The device specified by ControllerHandle and\r
+ RemainingDevicePath is already being managed by the driver\r
+ specified by This.\r
+ @retval EFI_ACCESS_DENIED The device specified by ControllerHandle and\r
+ RemainingDevicePath is already being managed by a different\r
+ driver or an application that requires exclusive access.\r
+ Currently not implemented.\r
+ @retval EFI_UNSUPPORTED The device specified by ControllerHandle and\r
+ RemainingDevicePath is not supported by the driver specified by This.\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+HttpDxeIp6DriverBindingSupported (\r
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,\r
+ IN EFI_HANDLE ControllerHandle,\r
+ IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath OPTIONAL\r
+ );\r
+\r
+/**\r
+ Starts a device controller or a bus controller.\r
+\r
+ The Start() function is designed to be invoked from the EFI boot service ConnectController().\r
+ As a result, much of the error checking on the parameters to Start() has been moved into this\r
+ common boot service. It is legal to call Start() from other locations,\r
+ but the following calling restrictions must be followed, or the system behavior will not be deterministic.\r
+ 1. ControllerHandle must be a valid EFI_HANDLE.\r
+ 2. If RemainingDevicePath is not NULL, then it must be a pointer to a naturally aligned\r
+ EFI_DEVICE_PATH_PROTOCOL.\r
+ 3. Prior to calling Start(), the Supported() function for the driver specified by This must\r
+ have been called with the same calling parameters, and Supported() must have returned EFI_SUCCESS.\r
+\r
+ @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.\r
+ @param[in] ControllerHandle The handle of the controller to start. This handle\r
+ must support a protocol interface that supplies\r
+ an I/O abstraction to the driver.\r
+ @param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This\r
+ parameter is ignored by device drivers, and is optional for bus\r
+ drivers. For a bus driver, if this parameter is NULL, then handles\r
+ for all the children of Controller are created by this driver.\r
+ If this parameter is not NULL and the first Device Path Node is\r
+ not the End of Device Path Node, then only the handle for the\r
+ child device specified by the first Device Path Node of\r
+ RemainingDevicePath is created by this driver.\r
+ If the first Device Path Node of RemainingDevicePath is\r
+ the End of Device Path Node, no child handle is created by this\r
+ driver.\r
+\r
+ @retval EFI_SUCCESS The device was started.\r
+ @retval EFI_ALREADY_STARTED This device is already running on ControllerHandle.\r
+ @retval EFI_DEVICE_ERROR The device could not be started due to a device error.Currently not implemented.\r
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.\r
+ @retval Others The driver failed to start the device.\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+HttpDxeIp6DriverBindingStart (\r
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,\r
+ IN EFI_HANDLE ControllerHandle,\r
+ IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath OPTIONAL\r
+ );\r
+\r
+/**\r
+ Stops a device controller or a bus controller.\r
+\r
+ The Stop() function is designed to be invoked from the EFI boot service DisconnectController().\r
+ As a result, much of the error checking on the parameters to Stop() has been moved\r
+ into this common boot service. It is legal to call Stop() from other locations,\r
+ but the following calling restrictions must be followed, or the system behavior will not be deterministic.\r
+ 1. ControllerHandle must be a valid EFI_HANDLE that was used on a previous call to this\r
+ same driver's Start() function.\r
+ 2. The first NumberOfChildren handles of ChildHandleBuffer must all be a valid\r
+ EFI_HANDLE. In addition, all of these handles must have been created in this driver's\r
+ Start() function, and the Start() function must have called OpenProtocol() on\r
+ ControllerHandle with an Attribute of EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER.\r
+\r
+ @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.\r
+ @param[in] ControllerHandle A handle to the device being stopped. The handle must\r
+ support a bus specific I/O protocol for the driver\r
+ to use to stop the device.\r
+ @param[in] NumberOfChildren The number of child device handles in ChildHandleBuffer.\r
+ @param[in] ChildHandleBuffer An array of child handles to be freed. May be NULL\r
+ if NumberOfChildren is 0.\r
+\r
+ @retval EFI_SUCCESS The device was stopped.\r
+ @retval EFI_DEVICE_ERROR The device could not be stopped due to a device error.\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+HttpDxeIp6DriverBindingStop (\r
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,\r
+ IN EFI_HANDLE ControllerHandle,\r
+ IN UINTN NumberOfChildren,\r
+ IN EFI_HANDLE *ChildHandleBuffer OPTIONAL\r
+ );\r
+\r
/**\r
Creates a child handle and installs a protocol.\r
\r
then a new handle is created. If it is a pointer to an existing UEFI handle,\r
then the protocol is added to the existing UEFI handle.\r
\r
- @retval EFI_SUCCES The protocol was added to ChildHandle.\r
+ @retval EFI_SUCCESS The protocol was added to ChildHandle.\r
@retval EFI_INVALID_PARAMETER This is NULL, or ChildHandle is NULL.\r
- @retval EFI_OUT_OF_RESOURCES There are not enough resources availabe to create\r
+ @retval EFI_OUT_OF_RESOURCES There are not enough resources available to create\r
the child.\r
@retval other The child handle was not created.\r
\r
@param This Pointer to the EFI_SERVICE_BINDING_PROTOCOL instance.\r
@param ChildHandle Handle of the child to destroy\r
\r
- @retval EFI_SUCCES The protocol was removed from ChildHandle.\r
+ @retval EFI_SUCCESS The protocol was removed from ChildHandle.\r
@retval EFI_UNSUPPORTED ChildHandle does not support the protocol that is being removed.\r
@retval EFI_INVALID_PARAMETER Child handle is NULL.\r
@retval other The child handle was not destroyed\r
IN EFI_HANDLE ChildHandle\r
);\r
\r
-\r
-extern EFI_HTTP_PROTOCOL mEfiHttpProtocolTemplete;\r
-\r
#endif\r
projects / mirror_edk2.git / blobdiff