# This is NT32 FDF file\r
-# $(BUILD_NUMBER) The number may be specified in the platform description (DSC) file¡¯s [Defines] section, BUILD_NUMBER element. \r
+#\r
+# Copyright (c) 2007, Intel Corporation\r
+#\r
+# All rights reserved. This program and the accompanying materials\r
+# are licensed and made available under the terms and conditions of the BSD License\r
+# which accompanies this distribution. The full text of the license may be found at\r
+# http://opensource.org/licenses/bsd-license.php\r
+#\r
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
+#\r
\r
+################################################################################\r
+#\r
+# FD Section\r
+# The [FD] Section is made up of the definition statements and a\r
+# description of what goes into the Flash Device Image. Each FD section\r
+# defines one flash "device" image. A flash device image may be one of\r
+# the following: Removable media bootable image (like a boot floppy\r
+# image,) an Option ROM image (that would be "flashed" into an add-in\r
+# card,) a System "Flash" image (that would be burned into a system¡¯s\r
+# flash) or an Update ("Capsule") image that will be used to update and\r
+# existing system flash.\r
+#\r
+################################################################################\r
[FD.Fv_Recovery]\r
-BaseAddress = 0x0|PcdFdBaseAddress\r
-Size = 0x002a0000\r
+BaseAddress = 0x0|PcdFdBaseAddress #The base address of the FLASH Device.\r
+Size = 0x002a0000 #The size in bytes of the FLASH Device\r
ErasePolarity = 1\r
BlockSize = 0x10000\r
NumBlocks = 0x2a\r
\r
+################################################################################\r
+#\r
+# Following are lists of FD Region layout which correspond to the locations of different\r
+# images within the flash device.\r
+#\r
+# Regions must be defined in ascending order and may not overlap.\r
+#\r
+# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by\r
+# the pipe "|" character, followed by the size of the region, also in hex with the leading\r
+# "0x" characters. Like:\r
+# Offset|Size\r
+# PcdOffsetCName|PcdSizeCName\r
+# RegionType <FV, DATA, or FILE>\r
+#\r
+################################################################################\r
0x00000000|0x00280000\r
PcdFlashFvRecoveryBase|PcdFlashFvRecoverySize\r
FV = FvRecovery\r
0x00280000|0x0000c000\r
PcdFlashNvStorageBase|PcdFlashNvStorageSize\r
DATA = {\r
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \r
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \r
- 0x8d, 0x2b, 0xf1, 0xff, 0x96, 0x76, 0x8b, 0x4c, \r
- 0xa9, 0x85, 0x27, 0x47, 0x07, 0x5b, 0x4f, 0x50, \r
- 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, \r
- 0x5f, 0x46, 0x56, 0x48, 0xff, 0x8c, 0xff, 0xff, \r
- 0x48, 0x00, 0x3b, 0x7c, 0x00, 0x00, 0x00, 0x01, \r
- 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, \r
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \r
- 0x24, 0x56, 0x53, 0x53, 0xb8, 0xbf, 0x00, 0x00, \r
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,\r
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,\r
+ 0x8d, 0x2b, 0xf1, 0xff, 0x96, 0x76, 0x8b, 0x4c,\r
+ 0xa9, 0x85, 0x27, 0x47, 0x07, 0x5b, 0x4f, 0x50,\r
+ 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00,\r
+ 0x5f, 0x46, 0x56, 0x48, 0xff, 0x8c, 0xff, 0xff,\r
+ 0x48, 0x00, 0x3b, 0x7c, 0x00, 0x00, 0x00, 0x01,\r
+ 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00,\r
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,\r
+ 0x24, 0x56, 0x53, 0x53, 0xb8, 0xbf, 0x00, 0x00,\r
0x5a, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00\r
}\r
\r
\r
0x0028e000|0x00002000\r
PcdFlashNvStorageFtwWorkingBase|PcdFlashNvStorageFtwWorkingSize\r
-DATA = { \r
- 0x8d, 0x2b, 0xf1, 0xff, 0x96, 0x76, 0x8b, 0x4c, \r
- 0xa9, 0x85, 0x27, 0x47, 0x07, 0x5b, 0x4f, 0x50, \r
- 0xd2, 0x5f, 0x05, 0x9e, 0xfe, 0xff, 0xff, 0xff, \r
- 0xff, 0xff, 0xff, 0xff, 0xe0, 0x1f, 0x00, 0x00 \r
+DATA = {\r
+ 0x8d, 0x2b, 0xf1, 0xff, 0x96, 0x76, 0x8b, 0x4c,\r
+ 0xa9, 0x85, 0x27, 0x47, 0x07, 0x5b, 0x4f, 0x50,\r
+ 0xd2, 0x5f, 0x05, 0x9e, 0xfe, 0xff, 0xff, 0xff,\r
+ 0xff, 0xff, 0xff, 0xff, 0xe0, 0x1f, 0x00, 0x00\r
}\r
\r
0x00290000|0x00010000\r
PcdFlashNvStorageFtwSpareBase|PcdFlashNvStorageFtwSpareBase\r
\r
+################################################################################\r
+#\r
+# FV Section\r
+#\r
+# [FV] section is used to define what components or modules are placed within a flash\r
+# device file. This section also defines order the components and modules are positioned\r
+# within the image. The [FV] section consists of define statements, set statements and\r
+# module statements.\r
+#\r
+################################################################################\r
[FV.FvRecovery]\r
-BlockSize = 0x10000\r
-NumBlocks = 0x28\r
-FvAlignment = 16\r
+FvAlignment = 16 #FV alignment and FV attributes setting.\r
ERASE_POLARITY = 1\r
MEMORY_MAPPED = TRUE\r
STICKY_WRITE = TRUE\r
READ_LOCK_CAP = TRUE\r
READ_LOCK_STATUS = TRUE\r
\r
-INF $(WORKSPACE)/Nt32Pkg/BootModePei/BootMode.inf\r
-INF $(WORKSPACE)/Nt32Pkg/WinNtThunkDxe/WinNtThunk.inf\r
-#INF $(WORKSPACE)/Nt32Pkg/MiscSubClassPlatformDxe/MiscSubclassDriver.inf\r
-INF $(WORKSPACE)/Nt32Pkg/WinNtThunkPPIToProtocolPei/WinNtThunkPPIToProtocol.inf\r
-INF $(WORKSPACE)/Nt32Pkg/WinNtAutoScanPei/WinNtAutoScan.inf\r
-INF $(WORKSPACE)/Nt32Pkg/WinNtBlockIoDxe/WinNtBlockIo.inf\r
-INF $(WORKSPACE)/Nt32Pkg/WinNtBusDriverDxe/WinNtBusDriver.inf\r
-INF $(WORKSPACE)/Nt32Pkg/WinNtConsoleDxe/WinNtConsole.inf\r
-INF $(WORKSPACE)/Nt32Pkg/WinNtSimpleFileSystemDxe/WinNtSimpleFileSystem.inf\r
-INF $(WORKSPACE)/Nt32Pkg/WinNtGopDxe/WinNtGop.inf\r
-INF $(WORKSPACE)/Nt32Pkg/WinNtSerialIoDxe/WinNtSerialIo.inf\r
-INF $(WORKSPACE)/Nt32Pkg/TimerDxe/Timer.inf\r
-INF $(WORKSPACE)/Nt32Pkg/ResetRuntimeDxe/Reset.inf\r
-INF $(WORKSPACE)/Nt32Pkg/RealTimeClockRuntimeDxe/RealTimeClock.inf\r
-INF $(WORKSPACE)/Nt32Pkg/MonotonicCounterRuntimeDxe/Metronome.inf\r
-INF $(WORKSPACE)/Nt32Pkg/CpuRuntimeDxe/Cpu.inf\r
-INF $(WORKSPACE)/Nt32Pkg/FvbServicesRuntimeDxe/Nt32Fwh.inf\r
-#INF $(WORKSPACE)/Nt32Pkg/PlatformBdsDxe/PlatformBds.inf\r
-INF $(WORKSPACE)/MdeModulePkg/Application/HelloWorld/HelloWorld.inf\r
-INF $(WORKSPACE)/MdeModulePkg/Universal/Disk/DiskIo/Dxe/DiskIo.inf\r
-INF $(WORKSPACE)/MdeModulePkg/Universal/Disk/Partition/Dxe/Partition.inf\r
-INF $(WORKSPACE)/MdeModulePkg/Universal/Disk/UnicodeCollation/English/Dxe/English.inf\r
-INF $(WORKSPACE)/MdeModulePkg/Universal/SecurityStubDxe/SecurityStub.inf\r
-INF $(WORKSPACE)/MdeModulePkg/Universal/Capsule/RuntimeDxe/CapsuleRuntime.inf\r
-INF $(WORKSPACE)/MdeModulePkg/Universal/Ebc/Dxe/Ebc.inf\r
-INF $(WORKSPACE)/MdeModulePkg/Universal/GenericMemoryTest/Dxe/NullMemoryTest.inf\r
-INF $(WORKSPACE)/MdeModulePkg/Universal/FirmwareVolume/FaultTolerantWriteLite/Dxe/FtwLite.inf\r
-INF $(WORKSPACE)/MdeModulePkg/Universal/BaseMemoryTestPei/BaseMemoryTest.inf\r
-INF $(WORKSPACE)/MdeModulePkg/Universal/FirmwareVolume/GuidedSectionExtraction/Crc32SectionExtract/Dxe/Crc32SectionExtract.inf\r
-INF $(WORKSPACE)/MdeModulePkg/Universal/VariableRuntimeDxe/Variable.inf\r
-INF $(WORKSPACE)/MdeModulePkg/Universal/RuntimeDxe/Runtime.inf\r
-INF $(WORKSPACE)/MdeModulePkg/Bus/Pci/AtapiPassThru/Dxe/AtapiPassThru.inf\r
-INF $(WORKSPACE)/MdeModulePkg/Universal/WatchDogTimerDxe/WatchDogTimer.inf\r
-INF $(WORKSPACE)/MdeModulePkg/Universal/VariablePei/Variable.inf\r
-INF $(WORKSPACE)/MdeModulePkg/Universal/VariableRuntimeDxe/Variable.inf\r
-INF $(WORKSPACE)/MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBus.inf\r
-INF $(WORKSPACE)/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.inf\r
-INF $(WORKSPACE)/IntelFrameworkModulePkg/Bus/Pci/PciBus/Dxe/PciBus.inf\r
-INF $(WORKSPACE)/IntelFrameworkModulePkg/Bus/Pci/IdeBus/Dxe/IdeBus.inf\r
-INF $(WORKSPACE)/IntelFrameworkModulePkg/Universal/DataHub/DataHub/Dxe/DataHub.inf\r
-INF $(WORKSPACE)/IntelFrameworkModulePkg/Universal/DataHub/DataHubStdErr/Dxe/DataHubStdErr.inf\r
-INF $(WORKSPACE)/IntelFrameworkModulePkg/Universal/StatusCode/Dxe/DxeStatusCode.inf\r
+################################################################################\r
+#\r
+# The INF statements point to EDK component and EDK II module INF files, which will be placed into this FV image.\r
+# Parsing tools will scan the INF file to determine the type of component or module.\r
+# The component or module type is used to reference the standard rules\r
+# defined elsewhere in the FDF file.\r
+#\r
+# The format for INF statements is:\r
+# INF $(PathAndInfFileName)\r
+#\r
+################################################################################\r
+ ##\r
+ # PEI Phase modules\r
+ ##\r
+INF $(WORKSPACE)/MdeModulePkg/Core/Pei/PeiMain.inf\r
+INF $(WORKSPACE)/MdeModulePkg/Universal/PCD/Pei/Pcd.inf\r
INF $(WORKSPACE)/IntelFrameworkModulePkg/Universal/StatusCode/Pei/PeiStatusCode.inf\r
+INF $(WORKSPACE)/Nt32Pkg/BootModePei/BootModePei.inf\r
+INF $(WORKSPACE)/Nt32Pkg/WinNtFlashMapPei/WinNtFlashMapPei.inf\r
+INF $(WORKSPACE)/MdeModulePkg/Universal/MemoryTest/BaseMemoryTestPei/BaseMemoryTestPei.inf\r
+INF $(WORKSPACE)/MdeModulePkg/Universal/Variable/Pei/VariablePei.inf\r
+INF $(WORKSPACE)/Nt32Pkg/WinNtAutoScanPei/WinNtAutoScanPei.inf\r
+INF $(WORKSPACE)/Nt32Pkg/WinNtFirmwareVolumePei/WinNtFirmwareVolumePei.inf\r
+INF $(WORKSPACE)/Nt32Pkg/WinNtThunkPPIToProtocolPei/WinNtThunkPPIToProtocolPei.inf\r
+INF $(WORKSPACE)/MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf\r
+\r
+ ##\r
+ # DXE Phase modules\r
+ ##\r
+INF $(WORKSPACE)/MdeModulePkg/Core/Dxe/DxeMain.inf\r
+INF $(WORKSPACE)/MdeModulePkg/Universal/PCD/Dxe/Pcd.inf\r
+INF $(WORKSPACE)/Nt32Pkg/MetronomeDxe/MetronomeDxe.inf\r
+INF $(WORKSPACE)/Nt32Pkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf\r
+INF $(WORKSPACE)/Nt32Pkg/ResetRuntimeDxe/ResetRuntimeDxe.inf\r
+INF $(WORKSPACE)/MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf\r
+INF $(WORKSPACE)/Nt32Pkg/FvbServicesRuntimeDxe/FvbServicesRuntimeDxe.inf\r
+INF $(WORKSPACE)/MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf\r
+INF $(WORKSPACE)/IntelFrameworkModulePkg/Universal/DataHubDxe/DataHubDxe.inf\r
+INF $(WORKSPACE)/MdeModulePkg/Universal/EbcDxe/EbcDxe.inf\r
+INF $(WORKSPACE)/MdeModulePkg/Universal/MemoryTest/NullMemoryTestDxe/NullMemoryTestDxe.inf\r
INF $(WORKSPACE)/IntelFrameworkModulePkg/Universal/HiiDataBaseDxe/HiiDatabase.inf\r
+INF $(WORKSPACE)/Nt32Pkg/WinNtThunkDxe/WinNtThunkDxe.inf\r
+INF $(WORKSPACE)/MdeModulePkg/Universal/FirmwareVolume/Crc32SectionExtractDxe/Crc32SectionExtractDxe.inf\r
+INF $(WORKSPACE)/Nt32Pkg/CpuRuntimeDxe/CpuRuntimeDxe.inf\r
+INF $(WORKSPACE)/Nt32Pkg/PlatformBdsDxe/PlatformBdsDxe.inf\r
+INF $(WORKSPACE)/MdeModulePkg/Universal/FirmwareVolume/FaultTolerantWriteDxe/FtwLite.inf\r
+INF $(WORKSPACE)/IntelFrameworkModulePkg/Universal/DataHubStdErrDxe/DataHubStdErrDxe.inf\r
+INF $(WORKSPACE)/Nt32Pkg/MiscSubClassPlatformDxe/MiscSubClassPlatformDxe.inf\r
+INF $(WORKSPACE)/Nt32Pkg/TimerDxe/TimerDxe.inf\r
+INF $(WORKSPACE)/IntelFrameworkModulePkg/Universal/StatusCode/Dxe/DxeStatusCode.inf\r
+INF $(WORKSPACE)/MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf\r
+INF $(WORKSPACE)/MdeModulePkg/Universal/WatchDogTimerDxe/WatchDogTimer.inf\r
+INF $(WORKSPACE)/MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf\r
+INF $(WORKSPACE)/MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf\r
+INF $(WORKSPACE)/MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf\r
+INF $(WORKSPACE)/MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf\r
+INF $(WORKSPACE)/MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf\r
+INF $(WORKSPACE)/MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf\r
+INF $(WORKSPACE)/MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf\r
+INF $(WORKSPACE)/MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf\r
+INF $(WORKSPACE)/MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf\r
INF $(WORKSPACE)/IntelFrameworkModulePkg/Universal/SetupBrowserDxe/SetupBrowser.inf\r
-#INF $(WORKSPACE)/IntelFrameworkModulePkg/Universal/DriverSampleDxe/DriverSample.inf\r
-INF $(WORKSPACE)/MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBus.inf ##This driver follows UEFI specification definition\r
-INF $(WORKSPACE)/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDisk.inf ##This driver follows UEFI specification definition\r
+INF $(WORKSPACE)/MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf\r
+INF $(WORKSPACE)/MdeModulePkg/Bus/Pci/AtapiPassThruDxe/AtapiPassThru.inf\r
+INF $(WORKSPACE)/IntelFrameworkModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf\r
+INF $(WORKSPACE)/MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf ##This driver follows UEFI specification definition\r
+INF $(WORKSPACE)/MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf ##This driver follows UEFI specification definition\r
+INF $(WORKSPACE)/IntelFrameworkModulePkg/Bus/Pci/IdeBusDxe/IdeBusDxe.inf\r
+INF $(WORKSPACE)/Nt32Pkg/WinNtBusDriverDxe/WinNtBusDriverDxe.inf\r
+INF $(WORKSPACE)/Nt32Pkg/WinNtBlockIoDxe/WinNtBlockIoDxe.inf\r
+INF $(WORKSPACE)/Nt32Pkg/WinNtConsoleDxe/WinNtConsoleDxe.inf\r
+INF $(WORKSPACE)/Nt32Pkg/WinNtSerialIoDxe/WinNtSerialIoDxe.inf\r
+INF $(WORKSPACE)/Nt32Pkg/WinNtGopDxe/WinNtGopDxe.inf\r
+INF $(WORKSPACE)/Nt32Pkg/WinNtSimpleFileSystemDxe/WinNtSimpleFileSystemDxe.inf\r
+INF $(WORKSPACE)/IntelFrameworkModulePkg/Universal/DriverSampleDxe/DriverSampleDxe.inf\r
+INF $(WORKSPACE)/MdeModulePkg/Application/HelloWorld/HelloWorld.inf\r
+\r
+################################################################################\r
+#\r
+# FILE statements are provided so that a platform integrator can include\r
+# complete EFI FFS files, as well as a method for constructing FFS files\r
+# using curly "{}" brace scoping. The following three FILEs are\r
+# for binary shell, binary fat and logo module.\r
+#\r
+################################################################################\r
FILE APPLICATION = c57ad6b7-0515-40a8-9d21-551652854e37 CHECKSUM {\r
SECTION COMPRESS PI_STD {\r
- SECTION GUIDED { \r
+ SECTION GUIDED {\r
SECTION PE32 = EdkShellBinPkg/FullShell/ia32/Shell_Full.efi\r
}\r
}\r
FILE DRIVER = 961578FE-B6B7-44c3-AF35-6BC705CD2B1F CHECKSUM {\r
SECTION COMPRESS PI_STD {\r
SECTION GUIDED {\r
- SECTION PE32 = FatBinPkg/Fat/Ia32/Fat.efi\r
+ SECTION PE32 = FatBinPkg/EnhancedFatDxe/Ia32/Fat.efi\r
}\r
}\r
}\r
FILE FREEFORM = 7BB28B99-61BB-11D5-9A5D-0090273FC14D CHECKSUM {\r
- SECTION COMPRESS PI_STD { \r
+ SECTION COMPRESS PI_STD {\r
SECTION GUIDED {\r
- SECTION RAW = EdkNt32Pkg/Logo/Logo.bmp\r
+ SECTION RAW = MdeModulePkg/Logo/Logo.bmp\r
}\r
- } \r
- } \r
+ }\r
+ }\r
\r
+\r
+################################################################################\r
+#\r
+# Rules are use with the [FV] section¡¯s module INF type to define\r
+# how an FFS file is created for a given INF file. The following Rule are the default\r
+# rules for the different module type. User can add the customized rules to define the\r
+# content of the FFS file.\r
+#\r
+################################################################################\r
[Rule.Common.PEI_CORE]\r
FILE PEI_CORE = $(NAMED_GUID) CheckSum {\r
PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
[Rule.Common.PEIM]\r
FILE PEIM = $(NAMED_GUID) CheckSum {\r
PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).Depex\r
- PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi \r
+ PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
UI Optional $(MODULE_NAME)\r
VERSION Optional BUILD_NUM=$(BUILD_NUMBER) $(INF_VERSION)\r
- } \r
+ }\r
\r
[Rule.Common.DXE_CORE]\r
FILE DXE_CORE = $(NAMED_GUID) CheckSum {\r
COMPRESS PI_STD {\r
- PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi \r
+ PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
UI Optional $(MODULE_NAME)\r
VERSION Optional BUILD_NUM=$(BUILD_NUMBER) $(INF_VERSION)\r
- } \r
+ }\r
}\r
\r
[Rule.Common.UEFI_DRIVER]\r
COMPRESS PI_STD {\r
GUIDED {\r
DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
- PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi \r
+ PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
UI Optional $(MODULE_NAME)\r
VERSION Optional BUILD_NUM=$(BUILD_NUMBER) $(INF_VERSION)\r
}\r
}\r
- } \r
+ }\r
\r
[Rule.Common.DXE_DRIVER]\r
FILE DRIVER = $(NAMED_GUID) CheckSum {\r
COMPRESS PI_STD {\r
GUIDED {\r
DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
- PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi \r
+ PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
UI Optional $(MODULE_NAME)\r
VERSION Optional BUILD_NUM=$(BUILD_NUMBER) $(INF_VERSION)\r
}\r
}\r
- } \r
+ }\r
\r
[Rule.Common.DXE_RUNTIME_DRIVER]\r
FILE DRIVER = $(NAMED_GUID) CheckSum {\r
COMPRESS PI_STD {\r
GUIDED {\r
DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
- PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi \r
+ PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
UI Optional $(MODULE_NAME)\r
VERSION Optional BUILD_NUM=$(BUILD_NUMBER) $(INF_VERSION)\r
}\r
}\r
- } \r
+ }\r
\r
[Rule.Common.UEFI_APPLICATION]\r
FILE APPLICATION = $(NAMED_GUID) CheckSum {\r
COMPRESS PI_STD {\r
GUIDED {\r
- PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi \r
+ PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
UI Optional $(MODULE_NAME)\r
VERSION Optional BUILD_NUM=$(BUILD_NUMBER) $(INF_VERSION)\r
}\r
}\r
- } \r
-
\ No newline at end of file
+ }\r
projects / mirror_edk2.git / blobdiff