-# This is NT32 FDF file\r
+# This is NT32 FDF file with UEFI HII features enabled\r
#\r
# Copyright (c) 2007, Intel Corporation\r
#\r
# existing system flash.\r
#\r
################################################################################\r
-[FD.Fv_Recovery]\r
+[FD.Nt32]\r
BaseAddress = 0x0|gEfiNt32PkgTokenSpaceGuid.PcdWinNtFdBaseAddress #The base address of the FLASH Device.\r
Size = 0x002a0000 #The size in bytes of the FLASH Device\r
ErasePolarity = 1\r
\r
0x00280000|0x0000c000\r
gEfiNt32PkgTokenSpaceGuid.PcdWinNtFlashNvStorageVariableBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize\r
+#NV_VARIABLE_STORE\r
DATA = {\r
+ ## This is the EFI_FIRMWARE_VOLUME_HEADER\r
+ # ZeroVector []\r
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,\r
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,\r
- 0x8d, 0x2b, 0xf1, 0xff, 0x96, 0x76, 0x8b, 0x4c,\r
- 0xa9, 0x85, 0x27, 0x47, 0x07, 0x5b, 0x4f, 0x50,\r
+ # FileSystemGuid: gEfiSystemNvDataFvGuid =\r
+ # { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}\r
+ 0x8D, 0x2B, 0xF1, 0xFF, 0x96, 0x76, 0x8B, 0x4C,\r
+ 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50,\r
+ # FvLength: 0x20000\r
0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00,\r
- 0x5f, 0x46, 0x56, 0x48, 0xff, 0x8c, 0xff, 0xff,\r
- 0x48, 0x00, 0x3b, 0x7c, 0x00, 0x00, 0x00, 0x01,\r
+ #Signature "_FVH" #Attributes\r
+ 0x5f, 0x46, 0x56, 0x48, 0xff, 0xfe, 0x04, 0x00,\r
+ #HeaderLength #CheckSum #ExtHeaderOffset #Reserved #Revision\r
+ 0x48, 0x00, 0x36, 0x09, 0x00, 0x00, 0x00, 0x02,\r
+ #Blockmap[0]: 2 Blocks * 0x10000 Bytes / Block\r
0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00,\r
+ #Blockmap[1]: End\r
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,\r
- 0x24, 0x56, 0x53, 0x53, 0xb8, 0xbf, 0x00, 0x00,\r
- 0x5a, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00\r
+ ## This is the VARIABLE_STORE_HEADER\r
+ #Signature: "$VSS" #Size: 0xc000 (gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize) - 0x48 (HeaderLength) = 0xBFB8\r
+ # This can speed up the Variable Dispatch a bit.\r
+ 0x24, 0x56, 0x53, 0x53, 0xB8, 0xBF, 0x00, 0x00,\r
+ #FORMATTED: 0x5A #HEALTHY: 0xFE #Reserved: UINT16 #Reserved1: UINT32\r
+ 0x5A, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00\r
}\r
\r
0x0028c000|0x00002000\r
+#NV_EVENT_LOG\r
gEfiNt32PkgTokenSpaceGuid.PcdWinNtFlashNvStorageEventLogBase|gEfiNt32PkgTokenSpaceGuid.PcdWinNtFlashNvStorageEventLogSize\r
\r
0x0028e000|0x00002000\r
gEfiNt32PkgTokenSpaceGuid.PcdWinNtFlashNvStorageFtwWorkingBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize\r
+#NV_FTW_WORKING\r
DATA = {\r
- 0x8d, 0x2b, 0xf1, 0xff, 0x96, 0x76, 0x8b, 0x4c,\r
- 0xa9, 0x85, 0x27, 0x47, 0x07, 0x5b, 0x4f, 0x50,\r
- 0xd2, 0x5f, 0x05, 0x9e, 0xfe, 0xff, 0xff, 0xff,\r
- 0xff, 0xff, 0xff, 0xff, 0xe0, 0x1f, 0x00, 0x00\r
+ # EFI_FAULT_TOLERANT_WORKING_BLOCK_HEADER->Signature = gEfiSystemNvDataFvGuid =\r
+ # { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}\r
+ 0x8D, 0x2B, 0xF1, 0xFF, 0x96, 0x76, 0x8B, 0x4C,\r
+ 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50,\r
+ # Crc:UINT32 #WorkingBlockValid:1, WorkingBlockInvalid:1, Reserved\r
+ 0x77, 0x13, 0x9B, 0xD7, 0xFE, 0xFF, 0xFF, 0xFF,\r
+ # WriteQueueSize: UINT64\r
+ 0xE0, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00\r
}\r
\r
0x00290000|0x00010000\r
+#NV_FTW_SPARE\r
gEfiNt32PkgTokenSpaceGuid.PcdWinNtFlashNvStorageFtwSpareBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize\r
-FV = FvDxe\r
\r
################################################################################\r
#\r
# module statements.\r
#\r
################################################################################\r
-[FV.FvDxe]\r
-BlockSize = 0x10000\r
+[FV.FvRecovery]\r
FvAlignment = 16 #FV alignment and FV attributes setting.\r
ERASE_POLARITY = 1\r
MEMORY_MAPPED = TRUE\r
READ_LOCK_CAP = TRUE\r
READ_LOCK_STATUS = TRUE\r
\r
-#INF MdeModulePkg/Core/Dxe/DxeMain.inf\r
-FILE DRIVER = 961578FE-B6B7-44c3-AF35-6BC705CD2B1F {\r
- SECTION COMPRESS PI_STD {\r
- SECTION GUIDED {\r
- SECTION PE32 = FatBinPkg/EnhancedFatDxe/Ia32/Fat.efi\r
- }\r
- }\r
+################################################################################\r
+#\r
+# The INF statements point to EDK component and EDK II module INF files, which will be placed into this FV image.\r
+# Parsing tools will scan the INF file to determine the type of component or module.\r
+# The component or module type is used to reference the standard rules\r
+# defined elsewhere in the FDF file.\r
+#\r
+# The format for INF statements is:\r
+# INF $(PathAndInfFileName)\r
+#\r
+################################################################################\r
+ ##\r
+ # PEI Phase modules\r
+ ##\r
+ ##\r
+ # PEI Apriori file example, more PEIM module added later.\r
+ ##\r
+APRIORI PEI {\r
+ INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf\r
+ INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/PeiStatusCode.inf\r
}\r
-FILE FREEFORM = 7BB28B99-61BB-11D5-9A5D-0090273FC14D {\r
- SECTION COMPRESS PI_STD {\r
- SECTION GUIDED {\r
- SECTION RAW = MdeModulePkg/Logo/Logo.bmp\r
- }\r
- }\r
+APRIORI DXE {\r
+ INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf\r
+ INF Nt32Pkg/MetronomeDxe/MetronomeDxe.inf\r
}\r
\r
-[FV.FvMain]\r
-BlockSize = 0x10000\r
-FvAlignment = 16 #FV alignment and FV attributes setting.\r
-ERASE_POLARITY = 1\r
-MEMORY_MAPPED = TRUE\r
-STICKY_WRITE = TRUE\r
-LOCK_CAP = TRUE\r
-LOCK_STATUS = TRUE\r
-WRITE_DISABLED_CAP = TRUE\r
-WRITE_ENABLED_CAP = TRUE\r
-WRITE_STATUS = TRUE\r
-WRITE_LOCK_CAP = TRUE\r
-WRITE_LOCK_STATUS = TRUE\r
-READ_DISABLED_CAP = TRUE\r
-READ_ENABLED_CAP = TRUE\r
-READ_STATUS = TRUE\r
-READ_LOCK_CAP = TRUE\r
-READ_LOCK_STATUS = TRUE\r
+INF MdeModulePkg/Core/Pei/PeiMain.inf\r
+INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf\r
+INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/PeiStatusCode.inf\r
+INF Nt32Pkg/BootModePei/BootModePei.inf\r
+INF Nt32Pkg/WinNtFlashMapPei/WinNtFlashMapPei.inf\r
+INF Nt32Pkg/WinNtAutoScanPei/WinNtAutoScanPei.inf\r
+INF Nt32Pkg/WinNtFirmwareVolumePei/WinNtFirmwareVolumePei.inf\r
+INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf\r
+INF Nt32Pkg/WinNtThunkPPIToProtocolPei/WinNtThunkPPIToProtocolPei.inf\r
+INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf\r
\r
-#INF MdeModulePkg/Core/Dxe/DxeMain.inf\r
+ ##\r
+ # DXE Phase modules\r
+ ##\r
+INF MdeModulePkg/Core/Dxe/DxeMain.inf\r
INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf\r
INF Nt32Pkg/MetronomeDxe/MetronomeDxe.inf\r
INF Nt32Pkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf\r
INF IntelFrameworkModulePkg/Universal/DataHubDxe/DataHubDxe.inf\r
INF MdeModulePkg/Universal/EbcDxe/EbcDxe.inf\r
INF MdeModulePkg/Universal/MemoryTest/NullMemoryTestDxe/NullMemoryTestDxe.inf\r
-INF IntelFrameworkModulePkg/Universal/HiiDataBaseDxe/HiiDatabase.inf\r
+INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf\r
INF Nt32Pkg/WinNtThunkDxe/WinNtThunkDxe.inf\r
INF Nt32Pkg/CpuRuntimeDxe/CpuRuntimeDxe.inf\r
-INF Nt32Pkg/PlatformBdsDxe/PlatformBdsDxe.inf\r
+INF IntelFrameworkModulePkg/Universal/BdsDxe/BdsDxe.inf\r
INF MdeModulePkg/Universal/FirmwareVolume/FaultTolerantWriteDxe/FtwLite.inf\r
INF IntelFrameworkModulePkg/Universal/DataHubStdErrDxe/DataHubStdErrDxe.inf\r
INF Nt32Pkg/MiscSubClassPlatformDxe/MiscSubClassPlatformDxe.inf\r
INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf\r
INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf\r
INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf\r
-INF IntelFrameworkModulePkg/Universal/SetupBrowserDxe/SetupBrowser.inf\r
+INF MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf\r
INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf\r
INF IntelFrameworkModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf\r
INF MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf ##This driver follows UEFI specification definition\r
INF Nt32Pkg/WinNtSerialIoDxe/WinNtSerialIoDxe.inf\r
INF Nt32Pkg/WinNtGopDxe/WinNtGopDxe.inf\r
INF Nt32Pkg/WinNtSimpleFileSystemDxe/WinNtSimpleFileSystemDxe.inf\r
-INF IntelFrameworkModulePkg/Universal/DriverSampleDxe/DriverSampleDxe.inf\r
+INF MdeModulePkg/Universal/DriverSampleDxe/DriverSampleDxe.inf\r
INF MdeModulePkg/Application/HelloWorld/HelloWorld.inf\r
\r
-\r
-[FV.FvRecovery]\r
-FvAlignment = 16 #FV alignment and FV attributes setting.\r
-ERASE_POLARITY = 1\r
-MEMORY_MAPPED = TRUE\r
-STICKY_WRITE = TRUE\r
-LOCK_CAP = TRUE\r
-LOCK_STATUS = TRUE\r
-WRITE_DISABLED_CAP = TRUE\r
-WRITE_ENABLED_CAP = TRUE\r
-WRITE_STATUS = TRUE\r
-WRITE_LOCK_CAP = TRUE\r
-WRITE_LOCK_STATUS = TRUE\r
-READ_DISABLED_CAP = TRUE\r
-READ_ENABLED_CAP = TRUE\r
-READ_STATUS = TRUE\r
-READ_LOCK_CAP = TRUE\r
-READ_LOCK_STATUS = TRUE\r
-\r
-################################################################################\r
-#\r
-# The INF statements point to EDK component and EDK II module INF files, which will be placed into this FV image.\r
-# Parsing tools will scan the INF file to determine the type of component or module.\r
-# The component or module type is used to reference the standard rules\r
-# defined elsewhere in the FDF file.\r
-#\r
-# The format for INF statements is:\r
-# INF $(PathAndInfFileName)\r
-#\r
-################################################################################\r
- ##\r
- # PEI Phase modules\r
- ##\r
- ##\r
- # PEI Apriori file example, more PEIM module added later.\r
- ##\r
-APRIORI PEI {\r
- INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf\r
- INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/PeiStatusCode.inf\r
- }\r
-APRIORI DXE {\r
- INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf\r
- INF Nt32Pkg/MetronomeDxe/MetronomeDxe.inf\r
- }\r
-\r
-INF MdeModulePkg/Core/Pei/PeiMain.inf\r
-INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf\r
-INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/PeiStatusCode.inf\r
-INF Nt32Pkg/BootModePei/BootModePei.inf\r
-INF Nt32Pkg/WinNtFlashMapPei/WinNtFlashMapPei.inf\r
-INF MdeModulePkg/Universal/MemoryTest/BaseMemoryTestPei/BaseMemoryTestPei.inf\r
-INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf\r
-INF Nt32Pkg/WinNtAutoScanPei/WinNtAutoScanPei.inf\r
-INF Nt32Pkg/WinNtFirmwareVolumePei/WinNtFirmwareVolumePei.inf\r
-INF Nt32Pkg/WinNtThunkPPIToProtocolPei/WinNtThunkPPIToProtocolPei.inf\r
-#FILE PEIM = 86D70125-BAA3-4296-A62F-602BEBBB9081 {\r
-# SECTION PEI_DEPEX = $(OUTPUT_DIRECTORY)/$(TARGET)_$(TOOL_CHAIN_TAG)/IA32/MdeModulePkg/Core/DxeIplPeim/DxeIpl/OUTPUT/DxeIpl.depex\r
-# SECTION UI = "DxeIpl"\r
-# SECTION PE32 = $(OUTPUT_DIRECTORY)/$(TARGET)_$(TOOL_CHAIN_TAG)/IA32/MdeModulePkg/Core/DxeIplPeim/DxeIpl/DEBUG/DxeIpl.efi\r
-# }\r
-\r
-INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf\r
-\r
-FILE FV_IMAGE = bdddaa2d-7f72-4a0d-b35a-bef1b64f6a09 {\r
- SECTION PEI_DEPEX = $(OUTPUT_DIRECTORY)/$(TARGET)_$(TOOL_CHAIN_TAG)/IA32/MdeModulePkg/Core/Pei/PeiMain/OUTPUT/PeiMain.depex\r
- SECTION DXE_DEPEX = $(OUTPUT_DIRECTORY)/$(TARGET)_$(TOOL_CHAIN_TAG)/IA32/MdeModulePkg/Core/Pei/PeiMain/OUTPUT/PeiMain.depex \r
- SECTION FV_IMAGE = FvMain\r
- }\r
- ##\r
- # DXE Phase modules\r
- ##\r
-INF MdeModulePkg/Core/Dxe/DxeMain.inf\r
-\r
-#FILE FV_IMAGE = cc00b922-8c49-4ea6-b6e9-17920bae36e0 {\r
-# SECTION FV_IMAGE = FvDxe\r
-# }\r
-\r
################################################################################\r
#\r
# FILE statements are provided so that a platform integrator can include\r
FILE APPLICATION = c57ad6b7-0515-40a8-9d21-551652854e37 {\r
SECTION COMPRESS PI_STD {\r
SECTION GUIDED {\r
- SECTION PE32 = EdkShellBinPkg/FullShell/ia32/Shell_Full.efi\r
+ SECTION PE32 = EdkShellBinPkg/FullShell/Ia32/Shell_Full.efi\r
}\r
}\r
}\r
\r
+FILE DRIVER = 961578FE-B6B7-44c3-AF35-6BC705CD2B1F {\r
+ SECTION PE32 = FatBinPkg/EnhancedFatDxe/Ia32/Fat.efi\r
+ }\r
+\r
+FILE FREEFORM = 7BB28B99-61BB-11D5-9A5D-0090273FC14D {\r
+ SECTION RAW = MdeModulePkg/Logo/Logo.bmp\r
+ }\r
+\r
+\r
################################################################################\r
#\r
# Rules are use with the [FV] section's module INF type to define\r
[Rule.Common.PEIM]\r
FILE PEIM = $(NAMED_GUID) {\r
PEI_DEPEX PEI_DEPEX Optional |.depex\r
- PE32 PE32 |.efi\r
+ PE32 PE32 |.efi\r
UI STRING="$(MODULE_NAME)" Optional \r
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER) \r
}\r
\r
+[Rule.Common.PEIM.TIANOCOMPRESSED]\r
+ FILE PEIM = $(NAMED_GUID) {\r
+ PEI_DEPEX PEI_DEPEX Optional |.depex\r
+ GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {\r
+ PE32 PE32 |.efi\r
+ UI STRING="$(MODULE_NAME)" Optional\r
+ VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
+ }\r
+ }\r
+\r
[Rule.Common.DXE_CORE]\r
FILE DXE_CORE = $(NAMED_GUID) {\r
COMPRESS PI_STD {\r
projects / mirror_edk2.git / blobdiff