/** @file\r
\r
- Virtual Memory Management Services to set or clear the memory encryption bit\r
+ Virtual Memory Management Services to test an address range encryption state\r
\r
- Copyright (c) 2006 - 2016, Intel Corporation. All rights reserved.<BR>\r
- Copyright (c) 2017, AMD Incorporated. All rights reserved.<BR>\r
+ Copyright (c) 2020, AMD Incorporated. All rights reserved.<BR>\r
\r
- This program and the accompanying materials are licensed and made available\r
- under the terms and conditions of the BSD License which accompanies this\r
- distribution. The full text of the license may be found at\r
- http://opensource.org/licenses/bsd-license.php\r
-\r
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, WITHOUT\r
- WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
-\r
- Code is derived from MdeModulePkg/Core/DxeIplPeim/X64/VirtualMemory.c\r
+ SPDX-License-Identifier: BSD-2-Clause-Patent\r
\r
**/\r
\r
#include <Library/CpuLib.h>\r
-#include <Register/Cpuid.h>\r
-#include <Register/Amd/Cpuid.h>\r
+#include <Library/MemEncryptSevLib.h>\r
\r
#include "VirtualMemory.h"\r
\r
-STATIC BOOLEAN mAddressEncMaskChecked = FALSE;\r
-STATIC UINT64 mAddressEncMask;\r
-STATIC PAGE_TABLE_POOL *mPageTablePool = NULL;\r
-\r
-typedef enum {\r
- SetCBit,\r
- ClearCBit\r
-} MAP_RANGE_MODE;\r
-\r
-/**\r
- Get the memory encryption mask\r
-\r
- @param[out] EncryptionMask contains the pte mask.\r
-\r
-**/\r
-STATIC\r
-UINT64\r
-GetMemEncryptionAddressMask (\r
- VOID\r
- )\r
-{\r
- UINT64 EncryptionMask;\r
- CPUID_MEMORY_ENCRYPTION_INFO_EBX Ebx;\r
-\r
- if (mAddressEncMaskChecked) {\r
- return mAddressEncMask;\r
- }\r
-\r
- //\r
- // CPUID Fn8000_001F[EBX] Bit 0:5 (memory encryption bit position)\r
- //\r
- AsmCpuid (CPUID_MEMORY_ENCRYPTION_INFO, NULL, &Ebx.Uint32, NULL, NULL);\r
- EncryptionMask = LShiftU64 (1, Ebx.Bits.PtePosBits);\r
-\r
- mAddressEncMask = EncryptionMask & PAGING_1G_ADDRESS_MASK_64;\r
- mAddressEncMaskChecked = TRUE;\r
-\r
- return mAddressEncMask;\r
-}\r
-\r
-/**\r
- Initialize a buffer pool for page table use only.\r
-\r
- To reduce the potential split operation on page table, the pages reserved for\r
- page table should be allocated in the times of PAGE_TABLE_POOL_UNIT_PAGES and\r
- at the boundary of PAGE_TABLE_POOL_ALIGNMENT. So the page pool is always\r
- initialized with number of pages greater than or equal to the given\r
- PoolPages.\r
-\r
- Once the pages in the pool are used up, this method should be called again to\r
- reserve at least another PAGE_TABLE_POOL_UNIT_PAGES. Usually this won't\r
- happen often in practice.\r
-\r
- @param[in] PoolPages The least page number of the pool to be created.\r
-\r
- @retval TRUE The pool is initialized successfully.\r
- @retval FALSE The memory is out of resource.\r
-**/\r
-STATIC\r
-BOOLEAN\r
-InitializePageTablePool (\r
- IN UINTN PoolPages\r
- )\r
-{\r
- VOID *Buffer;\r
-\r
- //\r
- // Always reserve at least PAGE_TABLE_POOL_UNIT_PAGES, including one page for\r
- // header.\r
- //\r
- PoolPages += 1; // Add one page for header.\r
- PoolPages = ((PoolPages - 1) / PAGE_TABLE_POOL_UNIT_PAGES + 1) *\r
- PAGE_TABLE_POOL_UNIT_PAGES;\r
- Buffer = AllocateAlignedPages (PoolPages, PAGE_TABLE_POOL_ALIGNMENT);\r
- if (Buffer == NULL) {\r
- DEBUG ((DEBUG_ERROR, "ERROR: Out of aligned pages\r\n"));\r
- return FALSE;\r
- }\r
-\r
- //\r
- // Link all pools into a list for easier track later.\r
- //\r
- if (mPageTablePool == NULL) {\r
- mPageTablePool = Buffer;\r
- mPageTablePool->NextPool = mPageTablePool;\r
- } else {\r
- ((PAGE_TABLE_POOL *)Buffer)->NextPool = mPageTablePool->NextPool;\r
- mPageTablePool->NextPool = Buffer;\r
- mPageTablePool = Buffer;\r
- }\r
-\r
- //\r
- // Reserve one page for pool header.\r
- //\r
- mPageTablePool->FreePages = PoolPages - 1;\r
- mPageTablePool->Offset = EFI_PAGES_TO_SIZE (1);\r
-\r
- return TRUE;\r
-}\r
-\r
-/**\r
- This API provides a way to allocate memory for page table.\r
-\r
- This API can be called more than once to allocate memory for page tables.\r
-\r
- Allocates the number of 4KB pages and returns a pointer to the allocated\r
- buffer. The buffer returned is aligned on a 4KB boundary.\r
-\r
- If Pages is 0, then NULL is returned.\r
- If there is not enough memory remaining to satisfy the request, then NULL is\r
- returned.\r
-\r
- @param Pages The number of 4 KB pages to allocate.\r
-\r
- @return A pointer to the allocated buffer or NULL if allocation fails.\r
-\r
-**/\r
-STATIC\r
-VOID *\r
-EFIAPI\r
-AllocatePageTableMemory (\r
- IN UINTN Pages\r
- )\r
-{\r
- VOID *Buffer;\r
-\r
- if (Pages == 0) {\r
- return NULL;\r
- }\r
-\r
- //\r
- // Renew the pool if necessary.\r
- //\r
- if (mPageTablePool == NULL ||\r
- Pages > mPageTablePool->FreePages) {\r
- if (!InitializePageTablePool (Pages)) {\r
- return NULL;\r
- }\r
- }\r
-\r
- Buffer = (UINT8 *)mPageTablePool + mPageTablePool->Offset;\r
-\r
- mPageTablePool->Offset += EFI_PAGES_TO_SIZE (Pages);\r
- mPageTablePool->FreePages -= Pages;\r
-\r
- DEBUG ((\r
- DEBUG_VERBOSE,\r
- "%a:%a: Buffer=0x%Lx Pages=%ld\n",\r
- gEfiCallerBaseName,\r
- __FUNCTION__,\r
- Buffer,\r
- Pages\r
- ));\r
-\r
- return Buffer;\r
-}\r
-\r
-\r
-/**\r
- Split 2M page to 4K.\r
-\r
- @param[in] PhysicalAddress Start physical address the 2M page\r
- covered.\r
- @param[in, out] PageEntry2M Pointer to 2M page entry.\r
- @param[in] StackBase Stack base address.\r
- @param[in] StackSize Stack size.\r
-\r
-**/\r
-STATIC\r
-VOID\r
-Split2MPageTo4K (\r
- IN PHYSICAL_ADDRESS PhysicalAddress,\r
- IN OUT UINT64 *PageEntry2M,\r
- IN PHYSICAL_ADDRESS StackBase,\r
- IN UINTN StackSize\r
- )\r
-{\r
- PHYSICAL_ADDRESS PhysicalAddress4K;\r
- UINTN IndexOfPageTableEntries;\r
- PAGE_TABLE_4K_ENTRY *PageTableEntry, *PageTableEntry1;\r
- UINT64 AddressEncMask;\r
-\r
- PageTableEntry = AllocatePageTableMemory(1);\r
-\r
- PageTableEntry1 = PageTableEntry;\r
-\r
- AddressEncMask = GetMemEncryptionAddressMask ();\r
-\r
- ASSERT (PageTableEntry != NULL);\r
- ASSERT (*PageEntry2M & AddressEncMask);\r
-\r
- PhysicalAddress4K = PhysicalAddress;\r
- for (IndexOfPageTableEntries = 0;\r
- IndexOfPageTableEntries < 512;\r
- (IndexOfPageTableEntries++,\r
- PageTableEntry++,\r
- PhysicalAddress4K += SIZE_4KB)) {\r
- //\r
- // Fill in the Page Table entries\r
- //\r
- PageTableEntry->Uint64 = (UINT64) PhysicalAddress4K | AddressEncMask;\r
- PageTableEntry->Bits.ReadWrite = 1;\r
- PageTableEntry->Bits.Present = 1;\r
- if ((PhysicalAddress4K >= StackBase) &&\r
- (PhysicalAddress4K < StackBase + StackSize)) {\r
- //\r
- // Set Nx bit for stack.\r
- //\r
- PageTableEntry->Bits.Nx = 1;\r
- }\r
- }\r
-\r
- //\r
- // Fill in 2M page entry.\r
- //\r
- *PageEntry2M = ((UINT64)(UINTN)PageTableEntry1 |\r
- IA32_PG_P | IA32_PG_RW | AddressEncMask);\r
-}\r
-\r
/**\r
- Set one page of page table pool memory to be read-only.\r
-\r
- @param[in] PageTableBase Base address of page table (CR3).\r
- @param[in] Address Start address of a page to be set as read-only.\r
- @param[in] Level4Paging Level 4 paging flag.\r
-\r
+ Returns the (updated) address range state based upon the page table\r
+ entry.\r
+\r
+ @param[in] CurrentState The current address range state\r
+ @param[in] PageDirectoryEntry The page table entry to check\r
+ @param[in] AddressEncMask The encryption mask\r
+\r
+ @retval MemEncryptSevAddressRangeUnencrypted Address range is mapped\r
+ unencrypted\r
+ @retval MemEncryptSevAddressRangeEncrypted Address range is mapped\r
+ encrypted\r
+ @retval MemEncryptSevAddressRangeMixed Address range is mapped mixed\r
**/\r
STATIC\r
-VOID\r
-SetPageTablePoolReadOnly (\r
- IN UINTN PageTableBase,\r
- IN EFI_PHYSICAL_ADDRESS Address,\r
- IN BOOLEAN Level4Paging\r
+MEM_ENCRYPT_SEV_ADDRESS_RANGE_STATE\r
+UpdateAddressState (\r
+ IN MEM_ENCRYPT_SEV_ADDRESS_RANGE_STATE CurrentState,\r
+ IN UINT64 PageDirectoryEntry,\r
+ IN UINT64 AddressEncMask\r
)\r
{\r
- UINTN Index;\r
- UINTN EntryIndex;\r
- UINT64 AddressEncMask;\r
- EFI_PHYSICAL_ADDRESS PhysicalAddress;\r
- UINT64 *PageTable;\r
- UINT64 *NewPageTable;\r
- UINT64 PageAttr;\r
- UINT64 LevelSize[5];\r
- UINT64 LevelMask[5];\r
- UINTN LevelShift[5];\r
- UINTN Level;\r
- UINT64 PoolUnitSize;\r
-\r
- ASSERT (PageTableBase != 0);\r
-\r
- //\r
- // Since the page table is always from page table pool, which is always\r
- // located at the boundary of PcdPageTablePoolAlignment, we just need to\r
- // set the whole pool unit to be read-only.\r
- //\r
- Address = Address & PAGE_TABLE_POOL_ALIGN_MASK;\r
-\r
- LevelShift[1] = PAGING_L1_ADDRESS_SHIFT;\r
- LevelShift[2] = PAGING_L2_ADDRESS_SHIFT;\r
- LevelShift[3] = PAGING_L3_ADDRESS_SHIFT;\r
- LevelShift[4] = PAGING_L4_ADDRESS_SHIFT;\r
-\r
- LevelMask[1] = PAGING_4K_ADDRESS_MASK_64;\r
- LevelMask[2] = PAGING_2M_ADDRESS_MASK_64;\r
- LevelMask[3] = PAGING_1G_ADDRESS_MASK_64;\r
- LevelMask[4] = PAGING_1G_ADDRESS_MASK_64;\r
-\r
- LevelSize[1] = SIZE_4KB;\r
- LevelSize[2] = SIZE_2MB;\r
- LevelSize[3] = SIZE_1GB;\r
- LevelSize[4] = SIZE_512GB;\r
-\r
- AddressEncMask = GetMemEncryptionAddressMask() &\r
- PAGING_1G_ADDRESS_MASK_64;\r
- PageTable = (UINT64 *)(UINTN)PageTableBase;\r
- PoolUnitSize = PAGE_TABLE_POOL_UNIT_SIZE;\r
-\r
- for (Level = (Level4Paging) ? 4 : 3; Level > 0; --Level) {\r
- Index = ((UINTN)RShiftU64 (Address, LevelShift[Level]));\r
- Index &= PAGING_PAE_INDEX_MASK;\r
-\r
- PageAttr = PageTable[Index];\r
- if ((PageAttr & IA32_PG_PS) == 0) {\r
- //\r
- // Go to next level of table.\r
- //\r
- PageTable = (UINT64 *)(UINTN)(PageAttr & ~AddressEncMask &\r
- PAGING_4K_ADDRESS_MASK_64);\r
- continue;\r
+ if (CurrentState == MemEncryptSevAddressRangeEncrypted) {\r
+ if ((PageDirectoryEntry & AddressEncMask) == 0) {\r
+ CurrentState = MemEncryptSevAddressRangeMixed;\r
}\r
-\r
- if (PoolUnitSize >= LevelSize[Level]) {\r
- //\r
- // Clear R/W bit if current page granularity is not larger than pool unit\r
- // size.\r
- //\r
- if ((PageAttr & IA32_PG_RW) != 0) {\r
- while (PoolUnitSize > 0) {\r
- //\r
- // PAGE_TABLE_POOL_UNIT_SIZE and PAGE_TABLE_POOL_ALIGNMENT are fit in\r
- // one page (2MB). Then we don't need to update attributes for pages\r
- // crossing page directory. ASSERT below is for that purpose.\r
- //\r
- ASSERT (Index < EFI_PAGE_SIZE/sizeof (UINT64));\r
-\r
- PageTable[Index] &= ~(UINT64)IA32_PG_RW;\r
- PoolUnitSize -= LevelSize[Level];\r
-\r
- ++Index;\r
- }\r
- }\r
-\r
- break;\r
-\r
- } else {\r
- //\r
- // The smaller granularity of page must be needed.\r
- //\r
- ASSERT (Level > 1);\r
-\r
- NewPageTable = AllocatePageTableMemory (1);\r
- ASSERT (NewPageTable != NULL);\r
-\r
- PhysicalAddress = PageAttr & LevelMask[Level];\r
- for (EntryIndex = 0;\r
- EntryIndex < EFI_PAGE_SIZE/sizeof (UINT64);\r
- ++EntryIndex) {\r
- NewPageTable[EntryIndex] = PhysicalAddress | AddressEncMask |\r
- IA32_PG_P | IA32_PG_RW;\r
- if (Level > 2) {\r
- NewPageTable[EntryIndex] |= IA32_PG_PS;\r
- }\r
- PhysicalAddress += LevelSize[Level - 1];\r
- }\r
-\r
- PageTable[Index] = (UINT64)(UINTN)NewPageTable | AddressEncMask |\r
- IA32_PG_P | IA32_PG_RW;\r
- PageTable = NewPageTable;\r
+ } else if (CurrentState == MemEncryptSevAddressRangeUnencrypted) {\r
+ if ((PageDirectoryEntry & AddressEncMask) != 0) {\r
+ CurrentState = MemEncryptSevAddressRangeMixed;\r
}\r
- }\r
-}\r
-\r
-/**\r
- Prevent the memory pages used for page table from been overwritten.\r
-\r
- @param[in] PageTableBase Base address of page table (CR3).\r
- @param[in] Level4Paging Level 4 paging flag.\r
-\r
-**/\r
-STATIC\r
-VOID\r
-EnablePageTableProtection (\r
- IN UINTN PageTableBase,\r
- IN BOOLEAN Level4Paging\r
- )\r
-{\r
- PAGE_TABLE_POOL *HeadPool;\r
- PAGE_TABLE_POOL *Pool;\r
- UINT64 PoolSize;\r
- EFI_PHYSICAL_ADDRESS Address;\r
-\r
- if (mPageTablePool == NULL) {\r
- return;\r
- }\r
-\r
- //\r
- // SetPageTablePoolReadOnly might update mPageTablePool. It's safer to\r
- // remember original one in advance.\r
- //\r
- HeadPool = mPageTablePool;\r
- Pool = HeadPool;\r
- do {\r
- Address = (EFI_PHYSICAL_ADDRESS)(UINTN)Pool;\r
- PoolSize = Pool->Offset + EFI_PAGES_TO_SIZE (Pool->FreePages);\r
-\r
+ } else if (CurrentState == MemEncryptSevAddressRangeError) {\r
//\r
- // The size of one pool must be multiple of PAGE_TABLE_POOL_UNIT_SIZE,\r
- // which is one of page size of the processor (2MB by default). Let's apply\r
- // the protection to them one by one.\r
+ // First address check, set initial state\r
//\r
- while (PoolSize > 0) {\r
- SetPageTablePoolReadOnly(PageTableBase, Address, Level4Paging);\r
- Address += PAGE_TABLE_POOL_UNIT_SIZE;\r
- PoolSize -= PAGE_TABLE_POOL_UNIT_SIZE;\r
- }\r
-\r
- Pool = Pool->NextPool;\r
- } while (Pool != HeadPool);\r
-\r
-}\r
-\r
-\r
-/**\r
- Split 1G page to 2M.\r
-\r
- @param[in] PhysicalAddress Start physical address the 1G page\r
- covered.\r
- @param[in, out] PageEntry1G Pointer to 1G page entry.\r
- @param[in] StackBase Stack base address.\r
- @param[in] StackSize Stack size.\r
-\r
-**/\r
-STATIC\r
-VOID\r
-Split1GPageTo2M (\r
- IN PHYSICAL_ADDRESS PhysicalAddress,\r
- IN OUT UINT64 *PageEntry1G,\r
- IN PHYSICAL_ADDRESS StackBase,\r
- IN UINTN StackSize\r
- )\r
-{\r
- PHYSICAL_ADDRESS PhysicalAddress2M;\r
- UINTN IndexOfPageDirectoryEntries;\r
- PAGE_TABLE_ENTRY *PageDirectoryEntry;\r
- UINT64 AddressEncMask;\r
-\r
- PageDirectoryEntry = AllocatePageTableMemory(1);\r
-\r
- AddressEncMask = GetMemEncryptionAddressMask ();\r
- ASSERT (PageDirectoryEntry != NULL);\r
- ASSERT (*PageEntry1G & GetMemEncryptionAddressMask ());\r
- //\r
- // Fill in 1G page entry.\r
- //\r
- *PageEntry1G = ((UINT64)(UINTN)PageDirectoryEntry |\r
- IA32_PG_P | IA32_PG_RW | AddressEncMask);\r
-\r
- PhysicalAddress2M = PhysicalAddress;\r
- for (IndexOfPageDirectoryEntries = 0;\r
- IndexOfPageDirectoryEntries < 512;\r
- (IndexOfPageDirectoryEntries++,\r
- PageDirectoryEntry++,\r
- PhysicalAddress2M += SIZE_2MB)) {\r
- if ((PhysicalAddress2M < StackBase + StackSize) &&\r
- ((PhysicalAddress2M + SIZE_2MB) > StackBase)) {\r
- //\r
- // Need to split this 2M page that covers stack range.\r
- //\r
- Split2MPageTo4K (\r
- PhysicalAddress2M,\r
- (UINT64 *)PageDirectoryEntry,\r
- StackBase,\r
- StackSize\r
- );\r
+ if ((PageDirectoryEntry & AddressEncMask) == 0) {\r
+ CurrentState = MemEncryptSevAddressRangeUnencrypted;\r
} else {\r
- //\r
- // Fill in the Page Directory entries\r
- //\r
- PageDirectoryEntry->Uint64 = (UINT64) PhysicalAddress2M | AddressEncMask;\r
- PageDirectoryEntry->Bits.ReadWrite = 1;\r
- PageDirectoryEntry->Bits.Present = 1;\r
- PageDirectoryEntry->Bits.MustBe1 = 1;\r
+ CurrentState = MemEncryptSevAddressRangeEncrypted;\r
}\r
}\r
-}\r
-\r
-\r
-/**\r
- Set or Clear the memory encryption bit\r
-\r
- @param[in] PagetablePoint Page table entry pointer (PTE).\r
- @param[in] Mode Set or Clear encryption bit\r
-\r
-**/\r
-STATIC VOID\r
-SetOrClearCBit(\r
- IN OUT UINT64* PageTablePointer,\r
- IN MAP_RANGE_MODE Mode\r
- )\r
-{\r
- UINT64 AddressEncMask;\r
-\r
- AddressEncMask = GetMemEncryptionAddressMask ();\r
-\r
- if (Mode == SetCBit) {\r
- *PageTablePointer |= AddressEncMask;\r
- } else {\r
- *PageTablePointer &= ~AddressEncMask;\r
- }\r
-\r
-}\r
-\r
-/**\r
- Check the WP status in CR0 register. This bit is used to lock or unlock write\r
- access to pages marked as read-only.\r
-\r
- @retval TRUE Write protection is enabled.\r
- @retval FALSE Write protection is disabled.\r
-**/\r
-STATIC\r
-BOOLEAN\r
-IsReadOnlyPageWriteProtected (\r
- VOID\r
- )\r
-{\r
- return ((AsmReadCr0 () & BIT16) != 0);\r
-}\r
-\r
-\r
-/**\r
- Disable Write Protect on pages marked as read-only.\r
-**/\r
-STATIC\r
-VOID\r
-DisableReadOnlyPageWriteProtect (\r
- VOID\r
- )\r
-{\r
- AsmWriteCr0 (AsmReadCr0() & ~BIT16);\r
-}\r
\r
-/**\r
- Enable Write Protect on pages marked as read-only.\r
-**/\r
-VOID\r
-EnableReadOnlyPageWriteProtect (\r
- VOID\r
- )\r
-{\r
- AsmWriteCr0 (AsmReadCr0() | BIT16);\r
+ return CurrentState;\r
}\r
\r
-\r
/**\r
- This function either sets or clears memory encryption bit for the memory\r
- region specified by PhysicalAddress and length from the current page table\r
- context.\r
-\r
- The function iterates through the physicalAddress one page at a time, and set\r
- or clears the memory encryption mask in the page table. If it encounters\r
- that a given physical address range is part of large page then it attempts to\r
- change the attribute at one go (based on size), otherwise it splits the\r
- large pages into smaller (e.g 2M page into 4K pages) and then try to set or\r
- clear the encryption bit on the smallest page size.\r
-\r
- @param[in] PhysicalAddress The physical address that is the start\r
- address of a memory region.\r
- @param[in] Length The length of memory region\r
- @param[in] Mode Set or Clear mode\r
- @param[in] Flush Flush the caches before applying the\r
- encryption mask\r
-\r
- @retval RETURN_SUCCESS The attributes were cleared for the\r
- memory region.\r
- @retval RETURN_INVALID_PARAMETER Number of pages is zero.\r
- @retval RETURN_UNSUPPORTED Setting the memory encyrption attribute\r
- is not supported\r
+ Returns the encryption state of the specified virtual address range.\r
+\r
+ @param[in] Cr3BaseAddress Cr3 Base Address (if zero then use\r
+ current CR3)\r
+ @param[in] BaseAddress Base address to check\r
+ @param[in] Length Length of virtual address range\r
+\r
+ @retval MemEncryptSevAddressRangeUnencrypted Address range is mapped\r
+ unencrypted\r
+ @retval MemEncryptSevAddressRangeEncrypted Address range is mapped\r
+ encrypted\r
+ @retval MemEncryptSevAddressRangeMixed Address range is mapped mixed\r
+ @retval MemEncryptSevAddressRangeError Address range is not mapped\r
**/\r
-\r
-STATIC\r
-RETURN_STATUS\r
+MEM_ENCRYPT_SEV_ADDRESS_RANGE_STATE\r
EFIAPI\r
-SetMemoryEncDec (\r
- IN PHYSICAL_ADDRESS Cr3BaseAddress,\r
- IN PHYSICAL_ADDRESS PhysicalAddress,\r
- IN UINTN Length,\r
- IN MAP_RANGE_MODE Mode,\r
- IN BOOLEAN CacheFlush\r
+InternalMemEncryptSevGetAddressRangeState (\r
+ IN PHYSICAL_ADDRESS Cr3BaseAddress,\r
+ IN PHYSICAL_ADDRESS BaseAddress,\r
+ IN UINTN Length\r
)\r
{\r
- PAGE_MAP_AND_DIRECTORY_POINTER *PageMapLevel4Entry;\r
- PAGE_MAP_AND_DIRECTORY_POINTER *PageUpperDirectoryPointerEntry;\r
- PAGE_MAP_AND_DIRECTORY_POINTER *PageDirectoryPointerEntry;\r
- PAGE_TABLE_1G_ENTRY *PageDirectory1GEntry;\r
- PAGE_TABLE_ENTRY *PageDirectory2MEntry;\r
- PAGE_TABLE_4K_ENTRY *PageTableEntry;\r
- UINT64 PgTableMask;\r
- UINT64 AddressEncMask;\r
- BOOLEAN IsWpEnabled;\r
- RETURN_STATUS Status;\r
-\r
- DEBUG ((\r
- DEBUG_VERBOSE,\r
- "%a:%a: Cr3Base=0x%Lx Physical=0x%Lx Length=0x%Lx Mode=%a CacheFlush=%u\n",\r
- gEfiCallerBaseName,\r
- __FUNCTION__,\r
- Cr3BaseAddress,\r
- PhysicalAddress,\r
- (UINT64)Length,\r
- (Mode == SetCBit) ? "Encrypt" : "Decrypt",\r
- (UINT32)CacheFlush\r
- ));\r
+ PAGE_MAP_AND_DIRECTORY_POINTER *PageMapLevel4Entry;\r
+ PAGE_MAP_AND_DIRECTORY_POINTER *PageUpperDirectoryPointerEntry;\r
+ PAGE_MAP_AND_DIRECTORY_POINTER *PageDirectoryPointerEntry;\r
+ PAGE_TABLE_1G_ENTRY *PageDirectory1GEntry;\r
+ PAGE_TABLE_ENTRY *PageDirectory2MEntry;\r
+ PAGE_TABLE_4K_ENTRY *PageTableEntry;\r
+ UINT64 AddressEncMask;\r
+ UINT64 PgTableMask;\r
+ PHYSICAL_ADDRESS Address;\r
+ PHYSICAL_ADDRESS AddressEnd;\r
+ MEM_ENCRYPT_SEV_ADDRESS_RANGE_STATE State;\r
\r
//\r
- // Check if we have a valid memory encryption mask\r
+ // If Cr3BaseAddress is not specified then read the current CR3\r
//\r
- AddressEncMask = GetMemEncryptionAddressMask ();\r
- if (!AddressEncMask) {\r
- return RETURN_ACCESS_DENIED;\r
+ if (Cr3BaseAddress == 0) {\r
+ Cr3BaseAddress = AsmReadCr3 ();\r
}\r
\r
- PgTableMask = AddressEncMask | EFI_PAGE_MASK;\r
+ AddressEncMask = MemEncryptSevGetEncryptionMask ();\r
+ AddressEncMask &= PAGING_1G_ADDRESS_MASK_64;\r
\r
- if (Length == 0) {\r
- return RETURN_INVALID_PARAMETER;\r
- }\r
+ PgTableMask = AddressEncMask | EFI_PAGE_MASK;\r
\r
- //\r
- // We are going to change the memory encryption attribute from C=0 -> C=1 or\r
- // vice versa Flush the caches to ensure that data is written into memory\r
- // with correct C-bit\r
- //\r
- if (CacheFlush) {\r
- WriteBackInvalidateDataCacheRange((VOID*) (UINTN)PhysicalAddress, Length);\r
- }\r
+ State = MemEncryptSevAddressRangeError;\r
\r
//\r
- // Make sure that the page table is changeable.\r
+ // Encryption is on a page basis, so start at the beginning of the\r
+ // virtual address page boundary and walk page-by-page.\r
//\r
- IsWpEnabled = IsReadOnlyPageWriteProtected ();\r
- if (IsWpEnabled) {\r
- DisableReadOnlyPageWriteProtect ();\r
- }\r
-\r
- Status = EFI_SUCCESS;\r
-\r
- while (Length)\r
- {\r
- //\r
- // If Cr3BaseAddress is not specified then read the current CR3\r
- //\r
- if (Cr3BaseAddress == 0) {\r
- Cr3BaseAddress = AsmReadCr3();\r
- }\r
+ Address = (PHYSICAL_ADDRESS)(UINTN)BaseAddress & ~EFI_PAGE_MASK;\r
+ AddressEnd = (PHYSICAL_ADDRESS)\r
+ (UINTN)(BaseAddress + Length);\r
\r
- PageMapLevel4Entry = (VOID*) (Cr3BaseAddress & ~PgTableMask);\r
- PageMapLevel4Entry += PML4_OFFSET(PhysicalAddress);\r
+ while (Address < AddressEnd) {\r
+ PageMapLevel4Entry = (VOID *)(Cr3BaseAddress & ~PgTableMask);\r
+ PageMapLevel4Entry += PML4_OFFSET (Address);\r
if (!PageMapLevel4Entry->Bits.Present) {\r
- DEBUG ((\r
- DEBUG_ERROR,\r
- "%a:%a: bad PML4 for Physical=0x%Lx\n",\r
- gEfiCallerBaseName,\r
- __FUNCTION__,\r
- PhysicalAddress\r
- ));\r
- Status = RETURN_NO_MAPPING;\r
- goto Done;\r
+ return MemEncryptSevAddressRangeError;\r
}\r
\r
PageDirectory1GEntry = (VOID *)(\r
- (PageMapLevel4Entry->Bits.PageTableBaseAddress <<\r
- 12) & ~PgTableMask\r
- );\r
- PageDirectory1GEntry += PDP_OFFSET(PhysicalAddress);\r
+ (PageMapLevel4Entry->Bits.PageTableBaseAddress <<\r
+ 12) & ~PgTableMask\r
+ );\r
+ PageDirectory1GEntry += PDP_OFFSET (Address);\r
if (!PageDirectory1GEntry->Bits.Present) {\r
- DEBUG ((\r
- DEBUG_ERROR,\r
- "%a:%a: bad PDPE for Physical=0x%Lx\n",\r
- gEfiCallerBaseName,\r
- __FUNCTION__,\r
- PhysicalAddress\r
- ));\r
- Status = RETURN_NO_MAPPING;\r
- goto Done;\r
+ return MemEncryptSevAddressRangeError;\r
}\r
\r
//\r
if (PageDirectory1GEntry->Bits.MustBe1) {\r
//\r
// Valid 1GB page\r
- // If we have at least 1GB to go, we can just update this entry\r
- //\r
- if (!(PhysicalAddress & (BIT30 - 1)) && Length >= BIT30) {\r
- SetOrClearCBit(&PageDirectory1GEntry->Uint64, Mode);\r
- DEBUG ((\r
- DEBUG_VERBOSE,\r
- "%a:%a: updated 1GB entry for Physical=0x%Lx\n",\r
- gEfiCallerBaseName,\r
- __FUNCTION__,\r
- PhysicalAddress\r
- ));\r
- PhysicalAddress += BIT30;\r
- Length -= BIT30;\r
- } else {\r
- //\r
- // We must split the page\r
- //\r
- DEBUG ((\r
- DEBUG_VERBOSE,\r
- "%a:%a: splitting 1GB page for Physical=0x%Lx\n",\r
- gEfiCallerBaseName,\r
- __FUNCTION__,\r
- PhysicalAddress\r
- ));\r
- Split1GPageTo2M (\r
- (UINT64)PageDirectory1GEntry->Bits.PageTableBaseAddress << 30,\r
- (UINT64 *)PageDirectory1GEntry,\r
- 0,\r
- 0\r
- );\r
- continue;\r
- }\r
- } else {\r
- //\r
- // Actually a PDP\r
- //\r
- PageUpperDirectoryPointerEntry =\r
- (PAGE_MAP_AND_DIRECTORY_POINTER *)PageDirectory1GEntry;\r
- PageDirectory2MEntry =\r
- (VOID *)(\r
- (PageUpperDirectoryPointerEntry->Bits.PageTableBaseAddress <<\r
- 12) & ~PgTableMask\r
- );\r
- PageDirectory2MEntry += PDE_OFFSET(PhysicalAddress);\r
- if (!PageDirectory2MEntry->Bits.Present) {\r
- DEBUG ((\r
- DEBUG_ERROR,\r
- "%a:%a: bad PDE for Physical=0x%Lx\n",\r
- gEfiCallerBaseName,\r
- __FUNCTION__,\r
- PhysicalAddress\r
- ));\r
- Status = RETURN_NO_MAPPING;\r
- goto Done;\r
- }\r
- //\r
- // If the MustBe1 bit is not a 1, it's not a 2MB entry\r
//\r
- if (PageDirectory2MEntry->Bits.MustBe1) {\r
- //\r
- // Valid 2MB page\r
- // If we have at least 2MB left to go, we can just update this entry\r
- //\r
- if (!(PhysicalAddress & (BIT21-1)) && Length >= BIT21) {\r
- SetOrClearCBit (&PageDirectory2MEntry->Uint64, Mode);\r
- PhysicalAddress += BIT21;\r
- Length -= BIT21;\r
- } else {\r
- //\r
- // We must split up this page into 4K pages\r
- //\r
- DEBUG ((\r
- DEBUG_VERBOSE,\r
- "%a:%a: splitting 2MB page for Physical=0x%Lx\n",\r
- gEfiCallerBaseName,\r
- __FUNCTION__,\r
- PhysicalAddress\r
- ));\r
- Split2MPageTo4K (\r
- (UINT64)PageDirectory2MEntry->Bits.PageTableBaseAddress << 21,\r
- (UINT64 *)PageDirectory2MEntry,\r
- 0,\r
- 0\r
- );\r
- continue;\r
- }\r
- } else {\r
- PageDirectoryPointerEntry =\r
- (PAGE_MAP_AND_DIRECTORY_POINTER *)PageDirectory2MEntry;\r
- PageTableEntry =\r
- (VOID *)(\r
- (PageDirectoryPointerEntry->Bits.PageTableBaseAddress <<\r
- 12) & ~PgTableMask\r
- );\r
- PageTableEntry += PTE_OFFSET(PhysicalAddress);\r
- if (!PageTableEntry->Bits.Present) {\r
- DEBUG ((\r
- DEBUG_ERROR,\r
- "%a:%a: bad PTE for Physical=0x%Lx\n",\r
- gEfiCallerBaseName,\r
- __FUNCTION__,\r
- PhysicalAddress\r
- ));\r
- Status = RETURN_NO_MAPPING;\r
- goto Done;\r
- }\r
- SetOrClearCBit (&PageTableEntry->Uint64, Mode);\r
- PhysicalAddress += EFI_PAGE_SIZE;\r
- Length -= EFI_PAGE_SIZE;\r
- }\r
- }\r
- }\r
-\r
- //\r
- // Protect the page table by marking the memory used for page table to be\r
- // read-only.\r
- //\r
- if (IsWpEnabled) {\r
- EnablePageTableProtection ((UINTN)PageMapLevel4Entry, TRUE);\r
- }\r
-\r
- //\r
- // Flush TLB\r
- //\r
- CpuFlushTlb();\r
-\r
-Done:\r
- //\r
- // Restore page table write protection, if any.\r
- //\r
- if (IsWpEnabled) {\r
- EnableReadOnlyPageWriteProtect ();\r
- }\r
+ State = UpdateAddressState (\r
+ State,\r
+ PageDirectory1GEntry->Uint64,\r
+ AddressEncMask\r
+ );\r
\r
- return Status;\r
-}\r
+ Address += BIT30;\r
+ continue;\r
+ }\r
\r
-/**\r
- This function clears memory encryption bit for the memory region specified by\r
- PhysicalAddress and length from the current page table context.\r
+ //\r
+ // Actually a PDP\r
+ //\r
+ PageUpperDirectoryPointerEntry =\r
+ (PAGE_MAP_AND_DIRECTORY_POINTER *)PageDirectory1GEntry;\r
+ PageDirectory2MEntry =\r
+ (VOID *)(\r
+ (PageUpperDirectoryPointerEntry->Bits.PageTableBaseAddress <<\r
+ 12) & ~PgTableMask\r
+ );\r
+ PageDirectory2MEntry += PDE_OFFSET (Address);\r
+ if (!PageDirectory2MEntry->Bits.Present) {\r
+ return MemEncryptSevAddressRangeError;\r
+ }\r
\r
- @param[in] PhysicalAddress The physical address that is the start\r
- address of a memory region.\r
- @param[in] Length The length of memory region\r
- @param[in] Flush Flush the caches before applying the\r
- encryption mask\r
+ //\r
+ // If the MustBe1 bit is not a 1, it's not a 2MB entry\r
+ //\r
+ if (PageDirectory2MEntry->Bits.MustBe1) {\r
+ //\r
+ // Valid 2MB page\r
+ //\r
+ State = UpdateAddressState (\r
+ State,\r
+ PageDirectory2MEntry->Uint64,\r
+ AddressEncMask\r
+ );\r
\r
- @retval RETURN_SUCCESS The attributes were cleared for the\r
- memory region.\r
- @retval RETURN_INVALID_PARAMETER Number of pages is zero.\r
- @retval RETURN_UNSUPPORTED Setting the memory encyrption attribute\r
- is not supported\r
-**/\r
-RETURN_STATUS\r
-EFIAPI\r
-InternalMemEncryptSevSetMemoryDecrypted (\r
- IN PHYSICAL_ADDRESS Cr3BaseAddress,\r
- IN PHYSICAL_ADDRESS PhysicalAddress,\r
- IN UINTN Length,\r
- IN BOOLEAN Flush\r
- )\r
-{\r
+ Address += BIT21;\r
+ continue;\r
+ }\r
\r
- return SetMemoryEncDec (\r
- Cr3BaseAddress,\r
- PhysicalAddress,\r
- Length,\r
- ClearCBit,\r
- Flush\r
- );\r
-}\r
+ //\r
+ // Actually a PMD\r
+ //\r
+ PageDirectoryPointerEntry =\r
+ (PAGE_MAP_AND_DIRECTORY_POINTER *)PageDirectory2MEntry;\r
+ PageTableEntry =\r
+ (VOID *)(\r
+ (PageDirectoryPointerEntry->Bits.PageTableBaseAddress <<\r
+ 12) & ~PgTableMask\r
+ );\r
+ PageTableEntry += PTE_OFFSET (Address);\r
+ if (!PageTableEntry->Bits.Present) {\r
+ return MemEncryptSevAddressRangeError;\r
+ }\r
\r
-/**\r
- This function sets memory encryption bit for the memory region specified by\r
- PhysicalAddress and length from the current page table context.\r
+ State = UpdateAddressState (\r
+ State,\r
+ PageTableEntry->Uint64,\r
+ AddressEncMask\r
+ );\r
\r
- @param[in] PhysicalAddress The physical address that is the start\r
- address of a memory region.\r
- @param[in] Length The length of memory region\r
- @param[in] Flush Flush the caches before applying the\r
- encryption mask\r
+ Address += EFI_PAGE_SIZE;\r
+ }\r
\r
- @retval RETURN_SUCCESS The attributes were cleared for the\r
- memory region.\r
- @retval RETURN_INVALID_PARAMETER Number of pages is zero.\r
- @retval RETURN_UNSUPPORTED Setting the memory encyrption attribute\r
- is not supported\r
-**/\r
-RETURN_STATUS\r
-EFIAPI\r
-InternalMemEncryptSevSetMemoryEncrypted (\r
- IN PHYSICAL_ADDRESS Cr3BaseAddress,\r
- IN PHYSICAL_ADDRESS PhysicalAddress,\r
- IN UINTN Length,\r
- IN BOOLEAN Flush\r
- )\r
-{\r
- return SetMemoryEncDec (\r
- Cr3BaseAddress,\r
- PhysicalAddress,\r
- Length,\r
- SetCBit,\r
- Flush\r
- );\r
+ return State;\r
}\r