IoWrite16 (FW_CFG_IO_SELECTOR, (UINT16)(UINTN) QemuFwCfgItem);\r
}\r
\r
-\r
-/**\r
- Transfer an array of bytes, or skip a number of bytes, using the DMA\r
- interface.\r
-\r
- @param[in] Size Size in bytes to transfer or skip.\r
-\r
- @param[in,out] Buffer Buffer to read data into or write data from. Ignored,\r
- and may be NULL, if Size is zero, or Control is\r
- FW_CFG_DMA_CTL_SKIP.\r
-\r
- @param[in] Control One of the following:\r
- FW_CFG_DMA_CTL_WRITE - write to fw_cfg from Buffer.\r
- FW_CFG_DMA_CTL_READ - read from fw_cfg into Buffer.\r
- FW_CFG_DMA_CTL_SKIP - skip bytes in fw_cfg.\r
-**/\r
-VOID\r
-InternalQemuFwCfgDmaBytes (\r
- IN UINT32 Size,\r
- IN OUT VOID *Buffer OPTIONAL,\r
- IN UINT32 Control\r
- )\r
-{\r
- volatile FW_CFG_DMA_ACCESS Access;\r
- UINT32 AccessHigh, AccessLow;\r
- UINT32 Status;\r
-\r
- ASSERT (Control == FW_CFG_DMA_CTL_WRITE || Control == FW_CFG_DMA_CTL_READ ||\r
- Control == FW_CFG_DMA_CTL_SKIP);\r
-\r
- if (Size == 0) {\r
- return;\r
- }\r
-\r
- Access.Control = SwapBytes32 (Control);\r
- Access.Length = SwapBytes32 (Size);\r
- Access.Address = SwapBytes64 ((UINTN)Buffer);\r
-\r
- //\r
- // Delimit the transfer from (a) modifications to Access, (b) in case of a\r
- // write, from writes to Buffer by the caller.\r
- //\r
- MemoryFence ();\r
-\r
- //\r
- // Start the transfer.\r
- //\r
- AccessHigh = (UINT32)RShiftU64 ((UINTN)&Access, 32);\r
- AccessLow = (UINT32)(UINTN)&Access;\r
- IoWrite32 (0x514, SwapBytes32 (AccessHigh));\r
- IoWrite32 (0x518, SwapBytes32 (AccessLow));\r
-\r
- //\r
- // Don't look at Access.Control before starting the transfer.\r
- //\r
- MemoryFence ();\r
-\r
- //\r
- // Wait for the transfer to complete.\r
- //\r
- do {\r
- Status = SwapBytes32 (Access.Control);\r
- ASSERT ((Status & FW_CFG_DMA_CTL_ERROR) == 0);\r
- } while (Status != 0);\r
-\r
- //\r
- // After a read, the caller will want to use Buffer.\r
- //\r
- MemoryFence ();\r
-}\r
-\r
-\r
/**\r
Reads firmware configuration bytes into a buffer\r
\r
\r
return RETURN_NOT_FOUND;\r
}\r
-\r
-\r
-/**\r
- Determine if S3 support is explicitly enabled.\r
-\r
- @retval TRUE if S3 support is explicitly enabled.\r
- FALSE otherwise. This includes unavailability of the firmware\r
- configuration interface.\r
-**/\r
-BOOLEAN\r
-EFIAPI\r
-QemuFwCfgS3Enabled (\r
- VOID\r
- )\r
-{\r
- RETURN_STATUS Status;\r
- FIRMWARE_CONFIG_ITEM FwCfgItem;\r
- UINTN FwCfgSize;\r
- UINT8 SystemStates[6];\r
-\r
- Status = QemuFwCfgFindFile ("etc/system-states", &FwCfgItem, &FwCfgSize);\r
- if (Status != RETURN_SUCCESS || FwCfgSize != sizeof SystemStates) {\r
- return FALSE;\r
- }\r
- QemuFwCfgSelectItem (FwCfgItem);\r
- QemuFwCfgReadBytes (sizeof SystemStates, SystemStates);\r
- return (BOOLEAN) (SystemStates[3] & BIT7);\r
-}\r