#include <Library/PeimEntryPoint.h>\r
#include <Library/ResourcePublicationLib.h>\r
#include <Library/MtrrLib.h>\r
+#include <Library/QemuFwCfgLib.h>\r
\r
#include "Platform.h"\r
#include "Cmos.h"\r
\r
+UINT8 mPhysMemAddressWidth;\r
+\r
UINT32\r
GetSystemMemorySizeBelow4gb (\r
VOID\r
Cmos0x34 = (UINT8) CmosRead8 (0x34);\r
Cmos0x35 = (UINT8) CmosRead8 (0x35);\r
\r
- return (((UINTN)((Cmos0x35 << 8) + Cmos0x34) << 16) + SIZE_16MB);\r
+ return (UINT32) (((UINTN)((Cmos0x35 << 8) + Cmos0x34) << 16) + SIZE_16MB);\r
}\r
\r
\r
return LShiftU64 (Size, 16);\r
}\r
\r
+\r
+/**\r
+ Return the highest address that DXE could possibly use, plus one.\r
+**/\r
+STATIC\r
+UINT64\r
+GetFirstNonAddress (\r
+ VOID\r
+ )\r
+{\r
+ UINT64 FirstNonAddress;\r
+ UINT64 Pci64Base, Pci64Size;\r
+ CHAR8 MbString[7 + 1];\r
+ EFI_STATUS Status;\r
+ FIRMWARE_CONFIG_ITEM FwCfgItem;\r
+ UINTN FwCfgSize;\r
+ UINT64 HotPlugMemoryEnd;\r
+\r
+ FirstNonAddress = BASE_4GB + GetSystemMemorySizeAbove4gb ();\r
+\r
+ //\r
+ // If DXE is 32-bit, then we're done; PciBusDxe will degrade 64-bit MMIO\r
+ // resources to 32-bit anyway. See DegradeResource() in\r
+ // "PciResourceSupport.c".\r
+ //\r
+#ifdef MDE_CPU_IA32\r
+ if (!FeaturePcdGet (PcdDxeIplSwitchToLongMode)) {\r
+ return FirstNonAddress;\r
+ }\r
+#endif\r
+\r
+ //\r
+ // Otherwise, in order to calculate the highest address plus one, we must\r
+ // consider the 64-bit PCI host aperture too. Fetch the default size.\r
+ //\r
+ Pci64Size = PcdGet64 (PcdPciMmio64Size);\r
+\r
+ //\r
+ // See if the user specified the number of megabytes for the 64-bit PCI host\r
+ // aperture. The number of non-NUL characters in MbString allows for\r
+ // 9,999,999 MB, which is approximately 10 TB.\r
+ //\r
+ // As signaled by the "X-" prefix, this knob is experimental, and might go\r
+ // away at any time.\r
+ //\r
+ Status = QemuFwCfgFindFile ("opt/ovmf/X-PciMmio64Mb", &FwCfgItem,\r
+ &FwCfgSize);\r
+ if (!EFI_ERROR (Status)) {\r
+ if (FwCfgSize >= sizeof MbString) {\r
+ DEBUG ((EFI_D_WARN,\r
+ "%a: ignoring malformed 64-bit PCI host aperture size from fw_cfg\n",\r
+ __FUNCTION__));\r
+ } else {\r
+ QemuFwCfgSelectItem (FwCfgItem);\r
+ QemuFwCfgReadBytes (FwCfgSize, MbString);\r
+ MbString[FwCfgSize] = '\0';\r
+ Pci64Size = LShiftU64 (AsciiStrDecimalToUint64 (MbString), 20);\r
+ }\r
+ }\r
+\r
+ if (Pci64Size == 0) {\r
+ if (mBootMode != BOOT_ON_S3_RESUME) {\r
+ DEBUG ((EFI_D_INFO, "%a: disabling 64-bit PCI host aperture\n",\r
+ __FUNCTION__));\r
+ PcdSet64 (PcdPciMmio64Size, 0);\r
+ }\r
+\r
+ //\r
+ // There's nothing more to do; the amount of memory above 4GB fully\r
+ // determines the highest address plus one. The memory hotplug area (see\r
+ // below) plays no role for the firmware in this case.\r
+ //\r
+ return FirstNonAddress;\r
+ }\r
+\r
+ //\r
+ // The "etc/reserved-memory-end" fw_cfg file, when present, contains an\r
+ // absolute, exclusive end address for the memory hotplug area. This area\r
+ // starts right at the end of the memory above 4GB. The 64-bit PCI host\r
+ // aperture must be placed above it.\r
+ //\r
+ Status = QemuFwCfgFindFile ("etc/reserved-memory-end", &FwCfgItem,\r
+ &FwCfgSize);\r
+ if (!EFI_ERROR (Status) && FwCfgSize == sizeof HotPlugMemoryEnd) {\r
+ QemuFwCfgSelectItem (FwCfgItem);\r
+ QemuFwCfgReadBytes (FwCfgSize, &HotPlugMemoryEnd);\r
+\r
+ ASSERT (HotPlugMemoryEnd >= FirstNonAddress);\r
+ FirstNonAddress = HotPlugMemoryEnd;\r
+ }\r
+\r
+ //\r
+ // SeaBIOS aligns both boundaries of the 64-bit PCI host aperture to 1GB, so\r
+ // that the host can map it with 1GB hugepages. Follow suit.\r
+ //\r
+ Pci64Base = ALIGN_VALUE (FirstNonAddress, (UINT64)SIZE_1GB);\r
+ Pci64Size = ALIGN_VALUE (Pci64Size, (UINT64)SIZE_1GB);\r
+\r
+ //\r
+ // The 64-bit PCI host aperture should also be "naturally" aligned. The\r
+ // alignment is determined by rounding the size of the aperture down to the\r
+ // next smaller or equal power of two. That is, align the aperture by the\r
+ // largest BAR size that can fit into it.\r
+ //\r
+ Pci64Base = ALIGN_VALUE (Pci64Base, GetPowerOfTwo64 (Pci64Size));\r
+\r
+ if (mBootMode != BOOT_ON_S3_RESUME) {\r
+ //\r
+ // The core PciHostBridgeDxe driver will automatically add this range to\r
+ // the GCD memory space map through our PciHostBridgeLib instance; here we\r
+ // only need to set the PCDs.\r
+ //\r
+ PcdSet64 (PcdPciMmio64Base, Pci64Base);\r
+ PcdSet64 (PcdPciMmio64Size, Pci64Size);\r
+ DEBUG ((EFI_D_INFO, "%a: Pci64Base=0x%Lx Pci64Size=0x%Lx\n",\r
+ __FUNCTION__, Pci64Base, Pci64Size));\r
+ }\r
+\r
+ //\r
+ // The useful address space ends with the 64-bit PCI host aperture.\r
+ //\r
+ FirstNonAddress = Pci64Base + Pci64Size;\r
+ return FirstNonAddress;\r
+}\r
+\r
+\r
+/**\r
+ Initialize the mPhysMemAddressWidth variable, based on guest RAM size.\r
+**/\r
+VOID\r
+AddressWidthInitialization (\r
+ VOID\r
+ )\r
+{\r
+ UINT64 FirstNonAddress;\r
+\r
+ //\r
+ // As guest-physical memory size grows, the permanent PEI RAM requirements\r
+ // are dominated by the identity-mapping page tables built by the DXE IPL.\r
+ // The DXL IPL keys off of the physical address bits advertized in the CPU\r
+ // HOB. To conserve memory, we calculate the minimum address width here.\r
+ //\r
+ FirstNonAddress = GetFirstNonAddress ();\r
+ mPhysMemAddressWidth = (UINT8)HighBitSet64 (FirstNonAddress);\r
+\r
+ //\r
+ // If FirstNonAddress is not an integral power of two, then we need an\r
+ // additional bit.\r
+ //\r
+ if ((FirstNonAddress & (FirstNonAddress - 1)) != 0) {\r
+ ++mPhysMemAddressWidth;\r
+ }\r
+\r
+ //\r
+ // The minimum address width is 36 (covers up to and excluding 64 GB, which\r
+ // is the maximum for Ia32 + PAE). The theoretical architecture maximum for\r
+ // X64 long mode is 52 bits, but the DXE IPL clamps that down to 48 bits. We\r
+ // can simply assert that here, since 48 bits are good enough for 256 TB.\r
+ //\r
+ if (mPhysMemAddressWidth <= 36) {\r
+ mPhysMemAddressWidth = 36;\r
+ }\r
+ ASSERT (mPhysMemAddressWidth <= 48);\r
+}\r
+\r
+\r
+/**\r
+ Calculate the cap for the permanent PEI memory.\r
+**/\r
+STATIC\r
+UINT32\r
+GetPeiMemoryCap (\r
+ VOID\r
+ )\r
+{\r
+ BOOLEAN Page1GSupport;\r
+ UINT32 RegEax;\r
+ UINT32 RegEdx;\r
+ UINT32 Pml4Entries;\r
+ UINT32 PdpEntries;\r
+ UINTN TotalPages;\r
+\r
+ //\r
+ // If DXE is 32-bit, then just return the traditional 64 MB cap.\r
+ //\r
+#ifdef MDE_CPU_IA32\r
+ if (!FeaturePcdGet (PcdDxeIplSwitchToLongMode)) {\r
+ return SIZE_64MB;\r
+ }\r
+#endif\r
+\r
+ //\r
+ // Dependent on physical address width, PEI memory allocations can be\r
+ // dominated by the page tables built for 64-bit DXE. So we key the cap off\r
+ // of those. The code below is based on CreateIdentityMappingPageTables() in\r
+ // "MdeModulePkg/Core/DxeIplPeim/X64/VirtualMemory.c".\r
+ //\r
+ Page1GSupport = FALSE;\r
+ if (PcdGetBool (PcdUse1GPageTable)) {\r
+ AsmCpuid (0x80000000, &RegEax, NULL, NULL, NULL);\r
+ if (RegEax >= 0x80000001) {\r
+ AsmCpuid (0x80000001, NULL, NULL, NULL, &RegEdx);\r
+ if ((RegEdx & BIT26) != 0) {\r
+ Page1GSupport = TRUE;\r
+ }\r
+ }\r
+ }\r
+\r
+ if (mPhysMemAddressWidth <= 39) {\r
+ Pml4Entries = 1;\r
+ PdpEntries = 1 << (mPhysMemAddressWidth - 30);\r
+ ASSERT (PdpEntries <= 0x200);\r
+ } else {\r
+ Pml4Entries = 1 << (mPhysMemAddressWidth - 39);\r
+ ASSERT (Pml4Entries <= 0x200);\r
+ PdpEntries = 512;\r
+ }\r
+\r
+ TotalPages = Page1GSupport ? Pml4Entries + 1 :\r
+ (PdpEntries + 1) * Pml4Entries + 1;\r
+ ASSERT (TotalPages <= 0x40201);\r
+\r
+ //\r
+ // Add 64 MB for miscellaneous allocations. Note that for\r
+ // mPhysMemAddressWidth values close to 36, the cap will actually be\r
+ // dominated by this increment.\r
+ //\r
+ return (UINT32)(EFI_PAGES_TO_SIZE (TotalPages) + SIZE_64MB);\r
+}\r
+\r
+\r
/**\r
Publish PEI core memory\r
\r
EFI_PHYSICAL_ADDRESS MemoryBase;\r
UINT64 MemorySize;\r
UINT64 LowerMemorySize;\r
+ UINT32 PeiMemoryCap;\r
\r
if (mBootMode == BOOT_ON_S3_RESUME) {\r
MemoryBase = PcdGet32 (PcdS3AcpiReservedMemoryBase);\r
MemorySize = PcdGet32 (PcdS3AcpiReservedMemorySize);\r
} else {\r
LowerMemorySize = GetSystemMemorySizeBelow4gb ();\r
+ if (FeaturePcdGet (PcdSmmSmramRequire)) {\r
+ //\r
+ // TSEG is chipped from the end of low RAM\r
+ //\r
+ LowerMemorySize -= FixedPcdGet8 (PcdQ35TsegMbytes) * SIZE_1MB;\r
+ }\r
+\r
+ PeiMemoryCap = GetPeiMemoryCap ();\r
+ DEBUG ((EFI_D_INFO, "%a: mPhysMemAddressWidth=%d PeiMemoryCap=%u KB\n",\r
+ __FUNCTION__, mPhysMemAddressWidth, PeiMemoryCap >> 10));\r
\r
//\r
// Determine the range of memory to use during PEI\r
//\r
- MemoryBase = PcdGet32 (PcdOvmfDxeMemFvBase) + PcdGet32 (PcdOvmfDxeMemFvSize);\r
+ // Technically we could lay the permanent PEI RAM over SEC's temporary\r
+ // decompression and scratch buffer even if "secure S3" is needed, since\r
+ // their lifetimes don't overlap. However, PeiFvInitialization() will cover\r
+ // RAM up to PcdOvmfDecompressionScratchEnd with an EfiACPIMemoryNVS memory\r
+ // allocation HOB, and other allocations served from the permanent PEI RAM\r
+ // shouldn't overlap with that HOB.\r
+ //\r
+ MemoryBase = mS3Supported && FeaturePcdGet (PcdSmmSmramRequire) ?\r
+ PcdGet32 (PcdOvmfDecompressionScratchEnd) :\r
+ PcdGet32 (PcdOvmfDxeMemFvBase) + PcdGet32 (PcdOvmfDxeMemFvSize);\r
MemorySize = LowerMemorySize - MemoryBase;\r
- if (MemorySize > SIZE_64MB) {\r
- MemoryBase = LowerMemorySize - SIZE_64MB;\r
- MemorySize = SIZE_64MB;\r
+ if (MemorySize > PeiMemoryCap) {\r
+ MemoryBase = LowerMemorySize - PeiMemoryCap;\r
+ MemorySize = PeiMemoryCap;\r
}\r
}\r
\r
{\r
UINT64 LowerMemorySize;\r
UINT64 UpperMemorySize;\r
+ MTRR_SETTINGS MtrrSettings;\r
+ EFI_STATUS Status;\r
\r
DEBUG ((EFI_D_INFO, "%a called\n", __FUNCTION__));\r
\r
//\r
// Create memory HOBs\r
//\r
- AddMemoryRangeHob (BASE_1MB, LowerMemorySize);\r
AddMemoryRangeHob (0, BASE_512KB + BASE_128KB);\r
- }\r
\r
- MtrrSetMemoryAttribute (BASE_1MB, LowerMemorySize - BASE_1MB, CacheWriteBack);\r
+ if (FeaturePcdGet (PcdSmmSmramRequire)) {\r
+ UINT32 TsegSize;\r
\r
- MtrrSetMemoryAttribute (0, BASE_512KB + BASE_128KB, CacheWriteBack);\r
+ TsegSize = FixedPcdGet8 (PcdQ35TsegMbytes) * SIZE_1MB;\r
+ AddMemoryRangeHob (BASE_1MB, LowerMemorySize - TsegSize);\r
+ AddReservedMemoryBaseSizeHob (LowerMemorySize - TsegSize, TsegSize,\r
+ TRUE);\r
+ } else {\r
+ AddMemoryRangeHob (BASE_1MB, LowerMemorySize);\r
+ }\r
\r
- if (UpperMemorySize != 0) {\r
- if (mBootMode != BOOT_ON_S3_RESUME) {\r
+ if (UpperMemorySize != 0) {\r
AddUntestedMemoryBaseSizeHob (BASE_4GB, UpperMemorySize);\r
}\r
+ }\r
\r
- MtrrSetMemoryAttribute (BASE_4GB, UpperMemorySize, CacheWriteBack);\r
+ //\r
+ // We'd like to keep the following ranges uncached:\r
+ // - [640 KB, 1 MB)\r
+ // - [LowerMemorySize, 4 GB)\r
+ //\r
+ // Everything else should be WB. Unfortunately, programming the inverse (ie.\r
+ // keeping the default UC, and configuring the complement set of the above as\r
+ // WB) is not reliable in general, because the end of the upper RAM can have\r
+ // practically any alignment, and we may not have enough variable MTRRs to\r
+ // cover it exactly.\r
+ //\r
+ if (IsMtrrSupported ()) {\r
+ MtrrGetAllMtrrs (&MtrrSettings);\r
+\r
+ //\r
+ // MTRRs disabled, fixed MTRRs disabled, default type is uncached\r
+ //\r
+ ASSERT ((MtrrSettings.MtrrDefType & BIT11) == 0);\r
+ ASSERT ((MtrrSettings.MtrrDefType & BIT10) == 0);\r
+ ASSERT ((MtrrSettings.MtrrDefType & 0xFF) == 0);\r
+\r
+ //\r
+ // flip default type to writeback\r
+ //\r
+ SetMem (&MtrrSettings.Fixed, sizeof MtrrSettings.Fixed, 0x06);\r
+ ZeroMem (&MtrrSettings.Variables, sizeof MtrrSettings.Variables);\r
+ MtrrSettings.MtrrDefType |= BIT11 | BIT10 | 6;\r
+ MtrrSetAllMtrrs (&MtrrSettings);\r
+\r
+ //\r
+ // Set memory range from 640KB to 1MB to uncacheable\r
+ //\r
+ Status = MtrrSetMemoryAttribute (BASE_512KB + BASE_128KB,\r
+ BASE_1MB - (BASE_512KB + BASE_128KB), CacheUncacheable);\r
+ ASSERT_EFI_ERROR (Status);\r
+\r
+ //\r
+ // Set memory range from the "top of lower RAM" (RAM below 4GB) to 4GB as\r
+ // uncacheable\r
+ //\r
+ Status = MtrrSetMemoryAttribute (LowerMemorySize,\r
+ SIZE_4GB - LowerMemorySize, CacheUncacheable);\r
+ ASSERT_EFI_ERROR (Status);\r
}\r
}\r
\r
}\r
\r
if (mBootMode != BOOT_ON_S3_RESUME) {\r
- //\r
- // Reserve the lock box storage area\r
- //\r
- // Since this memory range will be used on S3 resume, it must be\r
- // reserved as ACPI NVS.\r
- //\r
- // If S3 is unsupported, then various drivers might still write to the\r
- // LockBox area. We ought to prevent DXE from serving allocation requests\r
- // such that they would overlap the LockBox storage.\r
- //\r
- ZeroMem (\r
- (VOID*)(UINTN) PcdGet32 (PcdOvmfLockBoxStorageBase),\r
- (UINTN) PcdGet32 (PcdOvmfLockBoxStorageSize)\r
- );\r
- BuildMemoryAllocationHob (\r
- (EFI_PHYSICAL_ADDRESS)(UINTN) PcdGet32 (PcdOvmfLockBoxStorageBase),\r
- (UINT64)(UINTN) PcdGet32 (PcdOvmfLockBoxStorageSize),\r
- mS3Supported ? EfiACPIMemoryNVS : EfiBootServicesData\r
- );\r
+ if (!FeaturePcdGet (PcdSmmSmramRequire)) {\r
+ //\r
+ // Reserve the lock box storage area\r
+ //\r
+ // Since this memory range will be used on S3 resume, it must be\r
+ // reserved as ACPI NVS.\r
+ //\r
+ // If S3 is unsupported, then various drivers might still write to the\r
+ // LockBox area. We ought to prevent DXE from serving allocation requests\r
+ // such that they would overlap the LockBox storage.\r
+ //\r
+ ZeroMem (\r
+ (VOID*)(UINTN) PcdGet32 (PcdOvmfLockBoxStorageBase),\r
+ (UINTN) PcdGet32 (PcdOvmfLockBoxStorageSize)\r
+ );\r
+ BuildMemoryAllocationHob (\r
+ (EFI_PHYSICAL_ADDRESS)(UINTN) PcdGet32 (PcdOvmfLockBoxStorageBase),\r
+ (UINT64)(UINTN) PcdGet32 (PcdOvmfLockBoxStorageSize),\r
+ mS3Supported ? EfiACPIMemoryNVS : EfiBootServicesData\r
+ );\r
+ }\r
+\r
+ if (FeaturePcdGet (PcdSmmSmramRequire)) {\r
+ UINT32 TsegSize;\r
+\r
+ //\r
+ // Make sure the TSEG area that we reported as a reserved memory resource\r
+ // cannot be used for reserved memory allocations.\r
+ //\r
+ TsegSize = FixedPcdGet8 (PcdQ35TsegMbytes) * SIZE_1MB;\r
+ BuildMemoryAllocationHob (\r
+ GetSystemMemorySizeBelow4gb() - TsegSize,\r
+ TsegSize,\r
+ EfiReservedMemoryType\r
+ );\r
+ }\r
}\r
}\r