-/*++\r
-\r
-Copyright (c) 2005 - 2006, Intel Corporation \r
-All rights reserved. This program and the accompanying materials \r
-are licensed and made available under the terms and conditions of the BSD License \r
-which accompanies this distribution. The full text of the license may be found at \r
-http://opensource.org/licenses/bsd-license.php \r
- \r
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, \r
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. \r
-\r
-\r
-Module Name:\r
-\r
- Timer.h\r
-\r
-Abstract:\r
-\r
+/** @file\r
Private data structures\r
\r
---*/\r
+Copyright (c) 2005 - 2018, Intel Corporation. All rights reserved.<BR>\r
+This program and the accompanying materials\r
+are licensed and made available under the terms and conditions of the BSD License\r
+which accompanies this distribution. The full text of the license may be found at\r
+http://opensource.org/licenses/bsd-license.php\r
+\r
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
+**/\r
\r
#ifndef _TIMER_H_\r
#define _TIMER_H_\r
// ---------------- * 1,000,000 uS/S = 54925.4 uS = 549254 * 100 ns\r
// 1,193,182 Hz\r
//\r
+\r
+//\r
+// The maximum tick duration for 8254 timer\r
+//\r
+#define MAX_TIMER_TICK_DURATION 549254\r
+//\r
// The default timer tick duration is set to 10 ms = 100000 100 ns units\r
//\r
#define DEFAULT_TIMER_TICK_DURATION 100000\r
//\r
// Function Prototypes\r
//\r
+/**\r
+ Initialize the Timer Architectural Protocol driver\r
+\r
+ @param ImageHandle ImageHandle of the loaded driver\r
+ @param SystemTable Pointer to the System Table\r
+\r
+ @retval EFI_SUCCESS Timer Architectural Protocol created\r
+ @retval EFI_OUT_OF_RESOURCES Not enough resources available to initialize driver.\r
+ @retval EFI_DEVICE_ERROR A device error occurred attempting to initialize the driver.\r
+\r
+**/\r
EFI_STATUS\r
EFIAPI\r
TimerDriverInitialize (\r
IN EFI_HANDLE ImageHandle,\r
IN EFI_SYSTEM_TABLE *SystemTable\r
)\r
-/*++\r
-\r
-Routine Description:\r
-\r
- Initialize the Timer Architectural Protocol driver\r
-\r
-Arguments:\r
-\r
- ImageHandle - ImageHandle of the loaded driver\r
-\r
- SystemTable - Pointer to the System Table\r
-\r
-Returns:\r
-\r
- EFI_SUCCESS - Timer Architectural Protocol created\r
-\r
- EFI_OUT_OF_RESOURCES - Not enough resources available to initialize driver.\r
- \r
- EFI_DEVICE_ERROR - A device error occured attempting to initialize the driver.\r
-\r
---*/\r
;\r
\r
+/**\r
+\r
+ This function adjusts the period of timer interrupts to the value specified\r
+ by TimerPeriod. If the timer period is updated, then the selected timer\r
+ period is stored in EFI_TIMER.TimerPeriod, and EFI_SUCCESS is returned. If\r
+ the timer hardware is not programmable, then EFI_UNSUPPORTED is returned.\r
+ If an error occurs while attempting to update the timer period, then the\r
+ timer hardware will be put back in its state prior to this call, and\r
+ EFI_DEVICE_ERROR is returned. If TimerPeriod is 0, then the timer interrupt\r
+ is disabled. This is not the same as disabling the CPU's interrupts.\r
+ Instead, it must either turn off the timer hardware, or it must adjust the\r
+ interrupt controller so that a CPU interrupt is not generated when the timer\r
+ interrupt fires.\r
+\r
+\r
+ @param This The EFI_TIMER_ARCH_PROTOCOL instance.\r
+ @param NotifyFunction The rate to program the timer interrupt in 100 nS units. If\r
+ the timer hardware is not programmable, then EFI_UNSUPPORTED is\r
+ returned. If the timer is programmable, then the timer period\r
+ will be rounded up to the nearest timer period that is supported\r
+ by the timer hardware. If TimerPeriod is set to 0, then the\r
+ timer interrupts will be disabled.\r
+\r
+ @retval EFI_SUCCESS The timer period was changed.\r
+ @retval EFI_UNSUPPORTED The platform cannot change the period of the timer interrupt.\r
+ @retval EFI_DEVICE_ERROR The timer period could not be changed due to a device error.\r
+\r
+**/\r
EFI_STATUS\r
EFIAPI\r
TimerDriverRegisterHandler (\r
IN EFI_TIMER_ARCH_PROTOCOL *This,\r
IN EFI_TIMER_NOTIFY NotifyFunction\r
)\r
-/*++\r
-\r
-Routine Description:\r
-\r
- This function registers the handler NotifyFunction so it is called every time \r
- the timer interrupt fires. It also passes the amount of time since the last \r
- handler call to the NotifyFunction. If NotifyFunction is NULL, then the \r
- handler is unregistered. If the handler is registered, then EFI_SUCCESS is \r
- returned. If the CPU does not support registering a timer interrupt handler, \r
- then EFI_UNSUPPORTED is returned. If an attempt is made to register a handler \r
- when a handler is already registered, then EFI_ALREADY_STARTED is returned. \r
- If an attempt is made to unregister a handler when a handler is not registered, \r
- then EFI_INVALID_PARAMETER is returned. If an error occurs attempting to \r
- register the NotifyFunction with the timer interrupt, then EFI_DEVICE_ERROR \r
- is returned.\r
-\r
-Arguments:\r
-\r
- This - The EFI_TIMER_ARCH_PROTOCOL instance.\r
-\r
- NotifyFunction - The function to call when a timer interrupt fires. This \r
- function executes at TPL_HIGH_LEVEL. The DXE Core will \r
- register a handler for the timer interrupt, so it can know \r
- how much time has passed. This information is used to \r
- signal timer based events. NULL will unregister the handler.\r
-\r
-Returns: \r
-\r
- EFI_SUCCESS - The timer handler was registered.\r
-\r
- EFI_UNSUPPORTED - The platform does not support timer interrupts.\r
-\r
- EFI_ALREADY_STARTED - NotifyFunction is not NULL, and a handler is already \r
- registered.\r
-\r
- EFI_INVALID_PARAMETER - NotifyFunction is NULL, and a handler was not \r
- previously registered.\r
-\r
- EFI_DEVICE_ERROR - The timer handler could not be registered.\r
-\r
---*/\r
;\r
\r
+/**\r
+\r
+ This function adjusts the period of timer interrupts to the value specified\r
+ by TimerPeriod. If the timer period is updated, then the selected timer\r
+ period is stored in EFI_TIMER.TimerPeriod, and EFI_SUCCESS is returned. If\r
+ the timer hardware is not programmable, then EFI_UNSUPPORTED is returned.\r
+ If an error occurs while attempting to update the timer period, then the\r
+ timer hardware will be put back in its state prior to this call, and\r
+ EFI_DEVICE_ERROR is returned. If TimerPeriod is 0, then the timer interrupt\r
+ is disabled. This is not the same as disabling the CPU's interrupts.\r
+ Instead, it must either turn off the timer hardware, or it must adjust the\r
+ interrupt controller so that a CPU interrupt is not generated when the timer\r
+ interrupt fires.\r
+\r
+\r
+ @param This The EFI_TIMER_ARCH_PROTOCOL instance.\r
+ @param TimerPeriod The rate to program the timer interrupt in 100 nS units. If\r
+ the timer hardware is not programmable, then EFI_UNSUPPORTED is\r
+ returned. If the timer is programmable, then the timer period\r
+ will be rounded up to the nearest timer period that is supported\r
+ by the timer hardware. If TimerPeriod is set to 0, then the\r
+ timer interrupts will be disabled.\r
+\r
+ @retval EFI_SUCCESS The timer period was changed.\r
+ @retval EFI_UNSUPPORTED The platform cannot change the period of the timer interrupt.\r
+ @retval EFI_DEVICE_ERROR The timer period could not be changed due to a device error.\r
+\r
+**/\r
EFI_STATUS\r
EFIAPI\r
TimerDriverSetTimerPeriod (\r
IN EFI_TIMER_ARCH_PROTOCOL *This,\r
IN UINT64 TimerPeriod\r
)\r
-/*++\r
-\r
-Routine Description:\r
-\r
- This function adjusts the period of timer interrupts to the value specified \r
- by TimerPeriod. If the timer period is updated, then the selected timer \r
- period is stored in EFI_TIMER.TimerPeriod, and EFI_SUCCESS is returned. If \r
- the timer hardware is not programmable, then EFI_UNSUPPORTED is returned. \r
- If an error occurs while attempting to update the timer period, then the \r
- timer hardware will be put back in its state prior to this call, and \r
- EFI_DEVICE_ERROR is returned. If TimerPeriod is 0, then the timer interrupt \r
- is disabled. This is not the same as disabling the CPU's interrupts. \r
- Instead, it must either turn off the timer hardware, or it must adjust the \r
- interrupt controller so that a CPU interrupt is not generated when the timer \r
- interrupt fires. \r
-\r
-Arguments:\r
-\r
- This - The EFI_TIMER_ARCH_PROTOCOL instance.\r
-\r
- TimerPeriod - The rate to program the timer interrupt in 100 nS units. If \r
- the timer hardware is not programmable, then EFI_UNSUPPORTED is \r
- returned. If the timer is programmable, then the timer period \r
- will be rounded up to the nearest timer period that is supported \r
- by the timer hardware. If TimerPeriod is set to 0, then the \r
- timer interrupts will be disabled.\r
+;\r
\r
-Returns: \r
+/**\r
\r
- EFI_SUCCESS - The timer period was changed.\r
+ This function retrieves the period of timer interrupts in 100 ns units,\r
+ returns that value in TimerPeriod, and returns EFI_SUCCESS. If TimerPeriod\r
+ is NULL, then EFI_INVALID_PARAMETER is returned. If a TimerPeriod of 0 is\r
+ returned, then the timer is currently disabled.\r
\r
- EFI_UNSUPPORTED - The platform cannot change the period of the timer interrupt.\r
\r
- EFI_DEVICE_ERROR - The timer period could not be changed due to a device error.\r
+ @param This The EFI_TIMER_ARCH_PROTOCOL instance.\r
+ @param TimerPeriod A pointer to the timer period to retrieve in 100 ns units. If\r
+ 0 is returned, then the timer is currently disabled.\r
\r
---*/\r
-;\r
+ @retval EFI_SUCCESS The timer period was returned in TimerPeriod.\r
+ @retval EFI_INVALID_PARAMETER TimerPeriod is NULL.\r
\r
+**/\r
EFI_STATUS\r
EFIAPI\r
TimerDriverGetTimerPeriod (\r
IN EFI_TIMER_ARCH_PROTOCOL *This,\r
OUT UINT64 *TimerPeriod\r
)\r
-/*++\r
-\r
-Routine Description:\r
-\r
- This function retrieves the period of timer interrupts in 100 ns units, \r
- returns that value in TimerPeriod, and returns EFI_SUCCESS. If TimerPeriod \r
- is NULL, then EFI_INVALID_PARAMETER is returned. If a TimerPeriod of 0 is \r
- returned, then the timer is currently disabled.\r
-\r
-Arguments:\r
-\r
- This - The EFI_TIMER_ARCH_PROTOCOL instance.\r
+;\r
\r
- TimerPeriod - A pointer to the timer period to retrieve in 100 ns units. If \r
- 0 is returned, then the timer is currently disabled.\r
+/**\r
\r
-Returns: \r
+ This function generates a soft timer interrupt. If the platform does not support soft\r
+ timer interrupts, then EFI_UNSUPPORTED is returned. Otherwise, EFI_SUCCESS is returned.\r
+ If a handler has been registered through the EFI_TIMER_ARCH_PROTOCOL.RegisterHandler()\r
+ service, then a soft timer interrupt will be generated. If the timer interrupt is\r
+ enabled when this service is called, then the registered handler will be invoked. The\r
+ registered handler should not be able to distinguish a hardware-generated timer\r
+ interrupt from a software-generated timer interrupt.\r
\r
- EFI_SUCCESS - The timer period was returned in TimerPeriod.\r
\r
- EFI_INVALID_PARAMETER - TimerPeriod is NULL.\r
+ @param This The EFI_TIMER_ARCH_PROTOCOL instance.\r
\r
---*/\r
-;\r
+ @retval EFI_SUCCESS The soft timer interrupt was generated.\r
+ @retval EFI_UNSUPPORTED The platform does not support the generation of soft timer interrupts.\r
\r
+**/\r
EFI_STATUS\r
EFIAPI\r
TimerDriverGenerateSoftInterrupt (\r
IN EFI_TIMER_ARCH_PROTOCOL *This\r
)\r
-/*++\r
-\r
-Routine Description:\r
-\r
- This function generates a soft timer interrupt. If the platform does not support soft \r
- timer interrupts, then EFI_UNSUPPORTED is returned. Otherwise, EFI_SUCCESS is returned. \r
- If a handler has been registered through the EFI_TIMER_ARCH_PROTOCOL.RegisterHandler() \r
- service, then a soft timer interrupt will be generated. If the timer interrupt is \r
- enabled when this service is called, then the registered handler will be invoked. The \r
- registered handler should not be able to distinguish a hardware-generated timer \r
- interrupt from a software-generated timer interrupt.\r
-\r
-Arguments:\r
-\r
- This - The EFI_TIMER_ARCH_PROTOCOL instance.\r
-\r
-Returns: \r
-\r
- EFI_SUCCESS - The soft timer interrupt was generated.\r
-\r
- EFI_UNSUPPORTEDT - The platform does not support the generation of soft timer interrupts.\r
-\r
---*/\r
;\r
\r
#endif\r
projects / mirror_edk2.git / blobdiff