+++ /dev/null
-Intel(R) Platform Innovation Framework for EFI\r
-EFI Development Kit II (EDK II) \r
-Root Package 1.00\r
-2006-07-18\r
-\r
-Intel is a trademark or registered trademark of Intel Corporation or its \r
-subsidiaries in the United States and other countries.\r
-* Other names and brands may be claimed as the property of others.\r
-Copyright (c) 2006, Intel Corporation\r
-\r
-This document provides updates to documentation, along with a description on \r
-how to install and build the EDK II.\r
-\r
-Package Contents\r
-----------------\r
- ReleaseNote.txt- These release notes for the package.\r
- MdePkg - Industry-standard headers and libraries\r
- Tools - Build -specific tools that are designed to help the \r
- developer create and modify drivers and libraries\r
- EdkModulePkg - Reference drivers\r
- EdkFatBinPkg - Binary DXE drivers for the Fat 32 file system\r
- EdkShellBinPkg - Binary Shell applications and commands\r
- EdkNt32Pkg - NT32 Emulation platform reference\r
-\r
-Note: MDE and MDK that appear in other documentation refer to the MdePkg and\r
-Tools packages, respectively. While, these two packages are the minimum \r
-requirement for developing EDK II Packageswe recommend that you download all \r
-of the top-level files listed above.\r
-\r
-The following package is available as a separate project, under a separate \r
-license, on the TianoCore.org website: https://fat-driver2.tianocore.org\r
-\r
- EdkFatPkg - A package containing source DXE drivers for the Fat 32 file\r
- system\r
-\r
-Documents have the following filenames (to download these documents, see \93Notes \r
-on Documentation\94 later in these Release Notes):\r
- EDK II Module Development Environment Library Specification, v0.58 \r
- (MDE_Library_Spec_0_58.rtf)\r
- EDK II Build and Packaging Architecture Specification, v0.53\r
- (Build_Packaging_Spec_0_53.rtf)\r
- EDK II Platform Configuration Database Infrastructure Description, v0.54\r
- (PCD_Infrastructure_0_54.rtf)\r
- EDK II Module Surface Area Specification, v0.51\r
- (Module_Surface_Area_0_50.rtf)\r
- EDK II Module Development Environment Package Specification, v0.51\r
- (MDE_Package_Spec_0_51.rtf)\r
- EDK II C Coding Standards Specification v0.51\r
- (C_Coding_Standards_Specification_ 0_51.rtf)\r
- EDK II Subversion Setup Guide\r
- (edk2-subversion-setup.rtf)\r
-\r
-Pre-Requisites\r
---------------\r
-The following list of tools must be installed on the development workstation\r
-prior to using the EDK II.\r
-\r
-Compiler Tool Chain\r
- Microsoft* Visual Studio .NET 2003* (http://www.microsoft.com)\r
- or\r
- A special GCC version 4.x or later (http://gcc.gnu.org). See below.\r
-\r
-Assembler Tool Chain\r
- Microsoft Macro Assembler, version 6.15 or later\r
- or\r
- GNU binutils 2.16.1 or later\r
-\r
-Java Development Kit ( Java 5.0 or later)\r
- Sun* jdk-1.5.0_06 or later (http://java.sun.com)\r
- or\r
- Bea Systems* jrockit-25.2.0-jdk1.5.0_03 or later (http://www.bea.com)\r
-\r
-Java Tools\r
- Apache-ANT, version 1.6.5 or later (http://ant.apache.org)\r
- Ant-contrib, version 1.0b2 or later\r
- (http://prdownloads.sourceforge.net/ant-contrib/ant-contrib-1.0b2-bin.zip?download)\r
- Saxon8, version 8.1.1\r
- (http://prdownloads.sourceforge.net/saxon/saxonb8-1-1.zip?download)\r
- XMLBeans, version 2.1.0 (http://xmlbeans.apache.org)\r
- DO NOT download the latest XMLBeans, version 2.2.0. It is not compatible \r
- with Saxon8, version 8.1.1.\r
-\r
-Other Tools\r
- TortoiseSVN version 1.3.3. (http://tortoisesvn.tigris.org/)\r
-\r
-Optional Tools\r
---------------\r
-Compiler Tool Chains:\r
- Intel(R) C++ Compiler for Windows*, ver. 9.0 or later (http://www.intel.com)\r
- Intel(R) C Compiler for EFI Byte Code, ver. 1.2 or later \r
- (http://www.intel.com/cd/software/products/asmo-na/eng/compilers/efibc/index.htm)\r
- Microsoft Driver Development Kit, version 3790.1830 or later\r
- (http://www.microsoft.com/whdc/devtools/ddk/orderddkcd.mspx)\r
- Microsoft ACPI Source Language Assembler, Version 1.0.13NT or later\r
- Intel ACPI Component Architecture, version 20060113\r
-\r
------------------------------------------------\r
-Notes on Required Tools (Source Control System)\r
------------------------------------------------\r
-The EDK II is being managed by the Subversion Source Control on Tianocore.org.\r
-Subversion provides speed, security, and additional features. The\r
-recommended client is TortoiseSVN version 1.3.3. \r
- (Available at http://tortoisesvn.tigris.org/)\r
-\r
-The checkout procedures on the Tianocore.org Web site include\r
-instructions for the use of Subversion Source Control.\r
-\r
-The URL of the EDK II repository is:\r
- https://edk2.tianocore.org/svn/edk2/trunk/edk2\r
-\r
-\r
---------------------------------------------------------------------\r
-Notes On Required Tools (With examples for Windows, OS X, and Linux*) \r
---------------------------------------------------------------------\r
-Software Installation Order:\r
- After installing the compiler tools and your Subversion client, install the \r
- following required tools in this order: \r
- 1. Java JDK\r
- 2. Apache-Ant\r
- 3. ant-contrib\r
- 4. xmlbeans\r
- 5. saxon8\r
-\r
-Java Development Kit:\r
- \r
- The Java Environment Variable must be set before attempting to build.\r
- For Sun JDK (see note below\86):\r
- set JAVA_HOME=c:\Java\jdk1.5.0_06 (Windows example)\r
- export JAVA_HOME=/Library/Java/Home/ (OS X example)\r
- export JAVA_HOME=/usr/lib/j2sdk1.5-sun/ (Linux example)\r
- For Bea Systems:\r
- set JAVA_HOME=c:\Java\jrockit-R26.0.0-jdk1.5.0_04\r
- \r
- \86 When using the Sun JDK5.0:\r
- During installation, you should specify the install directory as C:\Java\r
- instead of C:\Program Files\(or some other drive letter.) While installing\r
- to this non-standard location is not required, in practice, it seems to work \r
- more reliably. \r
- For the JDK, the install path is C:\Java\jdk1.5.0_06\r
- For the JRE, the install path is C:\Java\jre1.5.0_06\r
- Alternatively, you can specify C:\sunjavajdk and C:\sunjavajre.\r
-\r
- NOTE: You cannot combine the location for the JDK and the JRE, because the \r
- JRE install removes most of the binaries and libraries installed by the JDK\r
- install.\r
-\r
-Java Tools:\r
- The Apache-ANT requires the ANT_HOME environment variable to be set before\r
- attempting to build:\r
- set ANT_HOME=c:\<full path to where ant was installed>\r
- export ANT_HOME=~/ExternalTools/apache-ant (OS X and Linux example)\r
-\r
- The ant-contrib.jar file should be installed in the %ANT_HOME%\lib \r
- directory.\r
-\r
- XMLBeans, requires the XMLBEANS_HOME environment variable to be set\r
- before attempting to build:\r
- set XMLBEANS_HOME=C:\<full path to where xmlbeans was installed>\r
- export XMLBEANS_HOME=~/ExternalTools/xmlbeans (OS X and Linux example)\r
-\r
- Copy the saxon8.jar file to the %XMLBEANS_HOME%\lib directory.\r
-\r
- The Ant and XMLBean tools must be in the path.\r
- MS system example:\r
- set PATH=%PATH%;%ANT_HOME%\bin;%XMLBEANS_HOME%\bin\r
- Linux/OS X bash shell example:\r
- export PATH=$PATH:${ANT_HOME}/bin:${XMLBEANS_HOME}/bin\r
-\r
---------------------\r
-A Word on Apache-ANT\r
---------------------\r
-The Apache-ANT program is a build tool that uses XML-based project files.\r
-Similar to Makefiles, these project files may contain multiple targets. Most\r
-build.xml files in EDK II are auto-generated; any edits performed on the\r
-build.xml files will be overwritten by the next build.\r
-\r
-Pre-defined targets in the build.xml file include:\r
- all - This target builds binaries for defined architectures.\r
- clean - This target removes object files generated by commands.\r
- cleanall - This target removes all generated files and directories.\r
-\r
-----------------------------\r
-A Word on the GCC Tool Chain\r
-----------------------------\r
-\r
-EDK II will not compile with a standard Linux gcc tool chain. While Linux\r
-distributions are usually based on ELF, EDK II requires a version of gcc that\r
-is configured to produce PE-COFF images. You will find a script in <Root of\r
-EDK2 tree>/Tools/gcc/tianoCross-gcc-4.1 that will download, configure, compile,\r
-and install a gcc 4.1 cross-compile tool chain for EDK II development. This\r
-custom tool chain supports the IA-32 architecture. It can be built and run on\r
-Cygwin, Linux, and many other POSIX-compliant host operating environments. To\r
-compile the custom gcc tool chain, you need the following tools on your host\r
-computer: bash, gcc, gmake, curl (or wget).\r
-\r
-Only the MdePkg and EdkModulePkg are currently supported by gcc builds. Other\r
-builds, such as the EdkNt32Pkg, will not compile with gcc. By default, the edk2\r
-will try to build the NT32.fpd, which is not supported by gcc. So, you need to\r
-change the Tools/Conf/target.txt.\r
-\r
-The cross-compile build script has been tested on Cygwin, OS X and Linux. You\r
-should expect to hack on these scripts to make them work on your system. You\r
-may need to install additional tools on your system to make the scripts work.\r
-\r
-You will need\r
-\r
- A recent version (3.0 or later should be fine) of gcc that is able to produce\r
- executables for the machine that you want to run this compiler on (the host\r
- machine).\r
- wget or curl (which enables the download of the gcc compiler source code)\r
- tar\r
- bzip\r
- gzip\r
- bash\r
- and possibly others\r
-\r
-CYGWIN Notes\r
-\r
-You should setup cygwin to use binmode on all mounts. When you initially\r
-install cygwin it gives you the choice of Unix file mode (recommended) or DOS\r
-file mode. Unix mode will cause all the cygwin directories to be mounted in\r
-binmode, while DOS will mount the dirs in textmode. Here is an example of a\r
-cygwin install where the dirs are (properly) mounted in binmode.\r
-To view mount information, type: \r
- mount\r
-\r
-C:\cygwin\bin on /usr/bin type user (binmode)\r
-C:\cygwin\lib on /usr/lib type user (binmode)\r
-c:\workspace on /workspace type system (binmode)\r
-C:\cygwin on / type user (binmode)\r
-\r
-If you use textmode, it is likely that the build will fail in a way that is\r
-hard to debug. Textmode is required to retain or add the DOS ^M characters\r
-in DOS batch files during file editing sessions.\r
-\r
-You can switch from textmode to binmode for compilation by executing the \r
-following:\r
- mount -b --change-cygdrive-prefix cygdrive\r
-\r
-Cygwin is pretty slow, so it is not recommended for large builds.\r
-\r
-\r
-\r
-\r
-\r
-The platform to be built is identified by the Tools/Conf/target.txt file:\r
-\r
-#\r
-# PROPERTY Type Use Description\r
-# ---------------- -------- -------- -----------------------------------------------------------\r
-# ACTIVE_PLATFORM Filename Recommended Specify the WORKSPACE relative Path and Filename \r
-# of the platform FPD file that will be used for the build\r
-# This line is required if and only if the current working\r
-# directory does not contain one or more FPD files.\r
-\r
-ACTIVE_PLATFORM =\r
- \r
-You can leave it black, as above, or set it to any .fpd file in the workspace.\r
-If you leave it blank, then you just cd to the dir that contains the .fpd that\r
-you would like to build (MdePkg/ or EdkModulePkg/) and then type build.\r
-\r
-----------------------------\r
-A Word on compiling on Linux\r
-----------------------------\r
-\r
-In order to compile on Linux, you will need to have the e2fsprogs-dev package\r
-installed. Check your distribution for the rpm, deb or other package format.\r
-This package contains the uuid library and header that are used by some of the\r
-host tools.\r
-\r
-If you are running on x86_64 Linux, then you should install a 64 bit version of\r
-the Java JDK. The version that was used was jdk-1_5_0_07-linux-amd64-rpm.bin.\r
-It may be downloaded from sun.com.\r
-\r
------------------------------------------\r
-A Word on compiling under Cygwin with gcc\r
------------------------------------------\r
-\r
-Cygwin is a POSIX style operating environment for Windows. It is possible to\r
-compile the EDK 2 using gcc and cygwin. Compiling under cygwin is slow, because \r
-the underlying file accesses are slow in cygwin. For this reason, we do not \r
-encourage the use of cygwin. A true unix system will be a superior choice for \r
-those wishing to compile with gcc.\r
-\r
-Make sure that you select the e2fsprogs development package when you install\r
-cygwin. It is necessary for the GenFvImage tool.\r
-\r
-----------------------------------------\r
-A Word on gcc for Processor Architectures\r
-----------------------------------------\r
-\r
-Currently gcc support is limited to IA-32 builds, generating IA-32 PE32 images. \r
-\r
-The X64 bit (Intel 64, etc.) support under the gcc compiler does not support the EFIAPI \r
-calling convention (as defined in the UEFI 2.0 specification Chapter 2), so it is not \r
-possible to build a working EFI image for an X64 environment. Since the x64 gcc does \r
-not support the EFIAPI calling convention the x64 tools do not support generating a \r
-PE32+ image. The EFIAPI calling convention is very similar to the Microsoft x64 \r
-calling convention.\r
-\r
-On ItaniumĀ® Processors the gcc compiler does not support generating a PE32+ image.\r
-\r
------------------------\r
-Notes on Documentation\r
------------------------\r
-The documents are being managed by the Subversion Source Control on\r
-Tianocore.org. The document repository is "docs" and must be checked out\r
-separately from the EDK II source tree. Refer to the checkout procedures on\r
-the Tianocore.org Web site for EDK II.\r
-\r
-The URL of the document repository is:\r
- https://edk2.tianocore.org/svn/edk2/trunk/docs\r
-\r
- \r
--------------------------------------------------------------------------------\r
-Quick Start\r
------------\r
-(assumes Microsoft Tools and OS environment, for GCC Tools or Linux, see \r
-"Detailed Starting Instructions" below)\r
-\r
-Follow the instructions at https://edk2.tianocore.org/servlets/ProjectSource to\r
-check out the entire EDK II source tree.\r
-\r
-In a command window, change to the top-level directory of the EDK II source.\r
-\r
-To test your tool chain setup and to build the supplied tools, execute:\r
- c:\MyWork\edk2\> edksetup ForceRebuild\r
-\r
-(The edksetup script is referred to as the setup command throughout the \r
-rest of this document.)\r
- NOTE: You should run the setup command at the start of every session.\r
- This configures the environment to include the TianoTools and the\r
- Java applications and libraries.\r
-\r
-You will need to set the WORKSPACE environment variable, or run the edksetup\r
-script (without any arguments), any time you want to build.\r
-\r
- Set the WORKSPACE environment variable, e.g.:\r
-\r
- c:\> set WORKSPACE=C:\MyWork\edk2\r
-\r
-You may need to edit the text files Tools/Conf/target.txt and\r
-Tools/Conf/tools_def.txt (created by edksetup) using your favorite \r
-text editor to ensure that the paths to the tools you want to use \r
-to build EDK II binaries are correct. These files contain the default \r
-paths (as per the default installation of the tools), so a customized \r
-install may require this manual process.\r
-\r
-Once this is completed, you are ready to test the build, by executing:\r
- c:\MyWork\edk2\> build\r
-\r
-This command builds the active platform specified in text file target.txt. If \r
-the active platform is not specified target.txt, you must execute the build \r
-command from the sub-directory that contains FPD files. For more information \r
-about the active platform policy, see the \93EDK II Build and Packaging \r
-Architecture Specification.\94\r
-\r
--------------------------------------------------------------------------------\r
-Detailed Starting Instructions\r
-------------------------------\r
-\r
-Follow the instructions at https://edk2.tianocore.org/servlets/ProjectSource to\r
-check out the entire EDK II source tree.\r
-\r
-In a command window, change to the top-level directory of the EDK II source.\r
-\r
-If the active compiler tool chain is GCC, you must set the\r
-environment variable, TOOL_CHAIN to "gcc" before running the\r
-edksetup script. Example: export TOOL_CHAIN=gcc\r
-\r
-To test your tool chain setup and to build the supplied tools, execute:\r
- c:\MyWork\edk2\> edksetup ForceRebuild\r
-\r
-On Linux systems, you must source the edksetup.sh file to load the correct\r
-settings into your shell.\r
-\r
- . edksetup.sh # Note the dot.\r
-\r
-If you have recently updated your code from subversion, the tools will need to\r
-be rebuilt if there were any code changes made to them. You can request that\r
-the tools get rebuilt by typing:\r
-\r
- . edksetup.sh Rebuild # Unix-like systems\r
- edksetup.bat Rebuild # Windows\r
-\r
-The edksetup script is referred to as the setup command throughout the \r
-rest of this document.\r
- NOTE: You should run the setup command at the start of every session.\r
- This configures the environment to include the TianoTools and the\r
- Java applications and libraries.\r
-\r
-Any changes to the tool source code or XML Schema documents require that\r
-you execute the following:\r
- c:\MyWork\edk2\> edksetup ForceRebuild\r
-\r
-You must set the WORKSPACE environment variable, or run the edksetup\r
-script (without any arguments), any time you want to build.\r
-\r
- Set the WORKSPACE environment variable, e.g.:\r
-\r
- c:\> set WORKSPACE=C:\MyWork\edk2\r
-\r
-You may need to edit the text files Tools/Conf/target.txt and\r
-Tools/Conf/tools_def.txt (created by edksetup) using your favorite \r
-text editor to ensure that the paths to the tools you want to use \r
-to build EDK II binaries are correct. These files contain the default \r
-paths (as per the default installation of the tools), so a customized \r
-tool installation may require this manual process.\r
-\r
-Once this is completed, you are ready to test the build, by executing:\r
- c:\MyWork\edk2\> build\r
-\r
-This command builds the active platform specified in text file target.txt. If \r
-the active platform is not specified, go to the sub-directory that contains FPD \r
-files and execute the build command. For more information about the active \r
-platform policy, see the \93EDK II Build and Packaging Architecture \r
-Specification.\94\r
-\r
---------------------------\r
-Individual Platform Builds\r
---------------------------\r
-After running the setup command, you can build individual platforms.\r
-In the command window:\r
- Set the active platform in target.txt, and execute this command:\r
- c:\<directory>\> build\r
-or\r
- cd to the platform (FPD file) that you want to build and execute this command:\r
- c:\MyWork\edk2\EdkNt32Pkg\> build\r
-\r
- Note that the active platform specified in target.txt overrides the platform \r
- specified by any FPD file in the current directory. For more information \r
- about active platform policy, see the \93EDK II Build and Packaging Architecture\r
- Specification.\94 \r
-\r
-To run the Nt32 emulation platform under Microsoft Windows, go to \r
-<full build path>\DEBUG\MSFT\IA32 and execute SecMain.exe\r
-\r
-To exit the Nt32 emulation platform, type \93reset\94 at the EFI Shell>\r
-command prompt. Alternatively, from the graphical interface, select the Boot\r
-Maintenance Manager's \93Reset System\94 command.\r
-\r
- NOTE: When creating a new platform, the Platform Name is restricted\r
- to a single word containing alphanumeric characters, underscore, dash, \r
- and period. The space character and other special characters are \r
- not allowed.\r
-\r
------------------------\r
-Notes on Symbolic Debug\r
------------------------\r
-To enable EFI Symbolic Debugging, make sure the target output is set to DEBUG\r
-in the text file Tools/Conf/target.txt and then modify the FPD <BuildOptions>\r
-<Options><Option BuildTargets="DEBUG" ToolCode="CC"> and append the following\r
-compiler options to the string:\r
-"/D EFI_GENERATE_SYM_FILE", "/D EFI_SYMBOLIC_DEBUG"\r
-\r
-(If the Option line does not contain "/D EFI_DEBUG", you must add that\r
-option as well.)\r
-\r
-------------------------\r
-Individual Module Builds\r
-------------------------\r
-After running the setup command, you can build individual modules.\r
- In the command window, cd to the module that you want to build, and\r
- execute the build command:\r
- c:\MyWork\edk2\MdePkg\Library\BaseLib\> build\r
-\r
- You must set the active platform in target.txt for individual module builds. \r
-\r
--------------------------------------------------------------------------------\r
-\r
-General Information:\r
-=============================================================== \r
-Mechanisms\r
-----------\r
-A brief overview:\r
-\r
-A) The Surface Area Package Description (SPD) file contains information about \r
-the modules that the package contains, including the location of all MSA files, \r
-and public library names and headers that might be provided by a module in the\r
-package. Packages are defined by SPD files. (Found in the root of the Package\r
-subdirectory (i.e. EdkNt32Pkg).) The SPD file is further explained in \93EDK II \r
-Build and Packaging Architecture Specification.\94\r
- \r
-B) Module Surface Area Definition (MSA) files. A description of a module's \r
-surface area, with all module specific default flags and features specified.\r
-For additional details, see the "EDK II Module Surface Area Specification" and \r
-the "EDK II Build and Packaging Architecture Specification."\r
-\r
-C) Framework Platform Description (FPD) files. A description of a platform's\r
-surface are, including a list of modules that are needed by the platform. To\r
-support individual module builds, developers are not required to provide\r
-information about specific flash devices, nor flash device layout. \r
-Specific sections in the FPD file control aspects of the build, such \r
-as the Supported Architectures and Build Targets, as well as the tool flags \r
-that are used to create the binary files. A valid platform file can specify \r
-zero or more modules, so individual modules can be compiled within the context\r
-of a platform (FPD) definition.\r
-\r
-D) Platform Configuration Database (PCD). A platform database that contains a\r
-variety of current platform settings or directives that can be accessed by a \r
-driver or application. The PCD is defined by the PCD_Protocol (This is\r
-further explained in the "EDK II Platform Configuration Database Infrastructure \r
-Description."\r
-\r
-E) Library Class. A library class is a logical grouping of similar functions.\r
-When developing components, the module surface area declares the class of\r
-libraries that can be used by the component. The MSA and SPD files can specify\r
-a recommended instance of the library that a platform integrator (PI) may \r
-select, however this is only a recommendation. The PI may choose to select a \r
-different library instance to be used during compilation and linking. All \r
-library type modules must include header files in their distribution package, \r
-as well as their MSA files. Components, on the other hand, need provide only an \r
-MSA file and either source or binary files when distributing packages. The \r
-Library Classes are further explained in the "EDK II Build and Packaging \r
-Architecture Specification."\r
-\r
-=========================================================================\r
-The common operations by developers of new modules are:\r
------------------------------------------------\r
-1) Manually creating a new module in a package:\r
- - The module source code must first be created in an appropriate directory\r
- (under the package the module is to be a part of.) \r
- - An MSA file must be created, spelling out all aspects of the module.\r
- - The MSA must be added to the SPD for the package to include the module.\r
-\r
------------------------------------------------------\r
-2) Adding and Removing modules to and from a package:\r
-\r
- - Set up environment as Build\r
- - Adding a module to a package:\r
- - Generate the MSA file\r
- - Add a new <Filename> element under <MsaFiles> into\r
- <PackageDir>\<PackageName>.spd, using arelative path to the package\r
- - Add a new <ModuleSA> entry under each <FrameworkModules> into the\r
- <PackageDir>\<PackageName>.fpd file if necessary. \r
-\r
- - Removing a module from a package:\r
- - Comment out or remove the corresponding <Filename> element under \r
- <MsaFiles> from <PackageDir>\<PackageName>.spd\r
- - Comment out or remove the corresponding <ModuleSA> entry under each\r
- <FrameworkModules> from <PackageDir>\<PackageName>.fpd if necessary. \r
-\r
--------------------------------\r
-3) Manually creating a package:\r
- - Identify the modules that are to be members of the project.\r
- - Identify the Variables and Guids required in and of the Package (including\r
- consumption and production information).\r
- - Create an SPD file defining these modules and calling out their MSA files.\r
- - Add a new <Filename> element under <PackageList> into \r
- Tools\Conf\FrameworkDatabase.db, using the relative path to the workspace. \r
-\r
------------------------------------------\r
-4) Declaring a new Protocol in a package: \r
- - This release requires manual editing of the SPD file, adding the protocol\r
- to the ProtocolDeclarations section of the file. \r
- - Add the Protocol .h file to the Include\Protocol directory.\r
- - Add an <Entry> to the <ProtocolDeclarations> element in the \r
- <PackageName>.spd file\r
- - Each line contains Protocol base name, followed by the global variable \r
- name, and the hex value of the Protocol GUID.\r
-\r
-Example Protocol Entries (NOTE: The Guid entry is a single line in the SPD \r
-file):\r
-<ProtocolDeclarations>\r
- <Entry Name="Bds">\r
- <C_Name>gEfiBdsArchProtocolGuid</C_Name>\r
- <GuidValue>665E3FF6-46CC-11D4-9A38-0090273FC14D</GuidValue>\r
- <HelpText/>\r
- </Entry>\r
- <Entry Name="Cpu">\r
- <C_Name>gEfiCpuArchProtocolGuid</C_Name>\r
- <GuidValue>26BACCB1-6F42-11D4-BCE7-0080C73C8881</GuidValue>\r
- <HelpText/>\r
- </Entry>\r
-</ProtocolDeclarations>\r
-\r
-------------------------------------\r
-5) Declaring a new PPI in a package:\r
- - This release requires manual editing of the SPD file\r
- - Add the PPI .h file to the Include\Ppi directory.\r
- - Add an <Entry> to the package <PpiDeclarations> element in the \r
- <PackageName>.spd file\r
- - Each line contains the PPI base name, followed by the global variable \r
- name and the hex value of the PPI GUID.\r
-\r
-Example Ppi Entries (NOTE: The Guid entry is a single line in the SPD file):\r
-<PpiDeclarations>\r
- <Entry Name="BootInRecoveryMode">\r
- <C_Name>gEfiPeiBootInRecoveryModePpiGuid</C_Name>\r
- <GuidValue>17EE496A-D8E4-4B9A-94D1-CE8272300850</GuidValue>\r
- <HelpText/>\r
- </Entry>\r
- <Entry Name="CpuIo">\r
- <C_Name>gEfiPeiCpuIoPpiInServiceTableGuid</C_Name>\r
- <GuidValue>E6AF1F7B-FC3F-46DA-A828-A3B457A44282</GuidValue>\r
- <HelpText/>\r
- </Entry>\r
-</PpiDeclarations>\r
-\r
--------------------------------------\r
-6) Declaring a new GUID in a package:\r
- - This release requires manual editing of the SPD file to include the new\r
- Guid. This is identical to adding a ProtocolDeclaration or PpiDeclaration\r
- element, as described above.\r
-\r
-------------------------------------------\r
-7) Declaring a new PCD entry in a package:\r
- - This release requires manual editing of the SPD file to include the new\r
- PCD. New Pcd entries are added to the PcdDefinitions section of the\r
- <PackageName>.spd file using the following example for the format\r
- (NOTE: The hex <Token> value must be unique):\r
-\r
-<PcdDeclarations>\r
- <PcdEntry ItemType="FIXED_AT_BUILD">\r
- <C_Name>PcdMaximumUnicodeStringLength</C_Name>\r
- <Token>0x00000001</Token>\r
- <TokenSpaceGuidCName>gEfiMdePkgTokenSpaceGuid</TokenSpaceGuidCName>\r
- <DatumType>UINT32</DatumType>\r
- <ValidUsage>FIXED_AT_BUILD</ValidUsage>\r
- <DefaultValue>1000000</DefaultValue>\r
- <HelpText>The maximum lengh for unicode string.</HelpText>\r
- </PcdEntry>\r
-</PcdDeclarations>\r
- \r
-------------------------------\r
-8) Declaring a new Library Class:\r
- - This release requires manual editing of the SPD file to include the new\r
- Library Class. New Library Class entries are added to the \r
- LibraryClassDeclarations section of the <PackageName>.spd file using\r
- the following example for the format:\r
-\r
-<LibraryClassDeclarations>\r
- <LibraryClass Name="BaseLib">\r
- <IncludeHeader>Include/Library/BaseLib.h</IncludeHeader>\r
- <HelpText/>\r
- </LibraryClass>\r
- <LibraryClass Name="BaseMemoryLib">\r
- <IncludeHeader>Include/Library/BaseMemoryLib.h</IncludeHeader>\r
- <HelpText/>\r
- </LibraryClass>\r
-</LibraryClassDeclarations>\r
-\r
-=======================================================\r
-EDK II Changes Relative to the original EDK:\r
---------------------------------------------\r
-The EDK II represents significant changes in the structure of the EDK.\r
-Therefore, it is very difficult to isolate all of the changes of this version of\r
-the EDK with the original EDK.\r
-\r
-Of particular note:\r
-\r
-1) EDK II contains new hardware feature support for the ICH SMBUS Libraries.\r
- These libraries are provided to make Memory Reference Code (MRC) development\r
- easier.\r
-2) The MDE libraries represent significant changes in source\r
- (with only limited changes in functionality.) These new libraries conform\r
- to the "EDK II Module Development Environment Library Specification.\94 \r
-3) The Fat Binary and the EDK Shell Binary Packages are functionally identical\r
- to the original EDK.\r
-4) The EDK tools directory has been expanded to include more tools and more\r
- tool functionality.\r
-5) The EDK NT32 section has been ported to the new build process, but\r
- functionally remains the same as the original EDK.\r
-6) The Application "HelloWorld" has been ported to EDK II as well.\r
-\r
-=======================================================\r
-Virus scanned by McAfee VirusScan Enterprise 8.0.0, Virus Definitions 4718, no\r
-virus detected.\r
-\r