/** @file\r
Implement the IP4 driver support for the socket layer.\r
\r
- Copyright (c) 2011, Intel Corporation\r
- All rights reserved. This program and the accompanying materials\r
- are licensed and made available under the terms and conditions of the BSD License\r
- which accompanies this distribution. The full text of the license may be found at\r
- http://opensource.org/licenses/bsd-license.php\r
+ Copyright (c) 2011 - 2015, Intel Corporation. All rights reserved.<BR>\r
+ This program and the accompanying materials are licensed and made available\r
+ under the terms and conditions of the BSD License which accompanies this\r
+ distribution. The full text of the license may be found at\r
+ http://opensource.org/licenses/bsd-license.php.\r
\r
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
-\r
**/\r
-\r
#include "Socket.h"\r
\r
\r
-/**\r
- Get the local socket address\r
+/** Get the local socket address.\r
\r
This routine returns the IPv4 address associated with the local\r
socket.\r
network address for the SOCK_RAW socket.\r
\r
@param [in] pPort Address of an ::ESL_PORT structure.\r
-\r
@param [out] pAddress Network address to receive the local system address\r
-\r
**/\r
VOID\r
EslIp4LocalAddressGet (\r
\r
DBG_ENTER ( );\r
\r
- //\r
// Return the local address\r
- //\r
pIp4 = &pPort->Context.Ip4;\r
pLocalAddress = (struct sockaddr_in *)pAddress;\r
pLocalAddress->sin_family = AF_INET;\r
}\r
\r
\r
-/**\r
- Set the local port address.\r
+/** Set the local port address.\r
\r
This routine sets the local port address.\r
\r
@param [in] bBindTest TRUE = run bind testing\r
\r
@retval EFI_SUCCESS The operation was successful\r
-\r
**/\r
EFI_STATUS\r
EslIp4LocalAddressSet (\r
\r
DBG_ENTER ( );\r
\r
- //\r
// Validate the address\r
- //\r
pIpAddress = (struct sockaddr_in *)pSockAddr;\r
if ( INADDR_BROADCAST == pIpAddress->sin_addr.s_addr ) {\r
- //\r
// The local address must not be the broadcast address\r
- //\r
Status = EFI_INVALID_PARAMETER;\r
pPort->pSocket->errno = EADDRNOTAVAIL;\r
}\r
else {\r
Status = EFI_SUCCESS;\r
\r
- //\r
// Set the local address\r
- //\r
pIpAddress = (struct sockaddr_in *)pSockAddr;\r
pIpv4Address = (UINT8 *)&pIpAddress->sin_addr.s_addr;\r
pConfig = &pPort->Context.Ip4.ModeData.ConfigData;\r
pConfig->StationAddress.Addr[2] = pIpv4Address[2];\r
pConfig->StationAddress.Addr[3] = pIpv4Address[3];\r
\r
- //\r
// Determine if the default address is used\r
- //\r
pConfig->UseDefaultAddress = (BOOLEAN)( 0 == pIpAddress->sin_addr.s_addr );\r
\r
- //\r
// Display the local address\r
- //\r
DEBUG (( DEBUG_BIND,\r
"0x%08x: Port, Local IP4 Address: %d.%d.%d.%d\r\n",\r
pPort,\r
pConfig->StationAddress.Addr[2],\r
pConfig->StationAddress.Addr[3]));\r
\r
- //\r
// Set the subnet mask\r
- //\r
if ( pConfig->UseDefaultAddress ) {\r
pConfig->SubnetMask.Addr[0] = 0;\r
pConfig->SubnetMask.Addr[1] = 0;\r
pConfig->SubnetMask.Addr[3] = ( 224 <= pConfig->StationAddress.Addr[0]) ? 0xff : 0;\r
}\r
}\r
-\r
- //\r
// Return the operation status\r
- //\r
DBG_EXIT_STATUS ( Status );\r
return Status;\r
}\r
\r
\r
-/**\r
- Get the option value\r
+/** Get the option value.\r
\r
This routine handles the IPv4 level options.\r
\r
@param [out] pOptionLength Buffer to receive the option length\r
\r
@retval EFI_SUCCESS - Socket data successfully received\r
-\r
**/\r
EFI_STATUS\r
EslIp4OptionGet (\r
\r
DBG_ENTER ( );\r
\r
- //\r
// Assume success\r
- //\r
pSocket->errno = 0;\r
Status = EFI_SUCCESS;\r
\r
- //\r
// Attempt to get the option\r
- //\r
switch ( OptionName ) {\r
default:\r
- //\r
// Option not supported\r
- //\r
pSocket->errno = ENOPROTOOPT;\r
Status = EFI_INVALID_PARAMETER;\r
break;\r
*pOptionLength = sizeof ( pSocket->bIncludeHeader );\r
break;\r
}\r
-\r
- //\r
// Return the operation status\r
- //\r
DBG_EXIT_STATUS ( Status );\r
return Status;\r
}\r
\r
\r
-/**\r
- Set the option value\r
+/** Set the option value.\r
\r
This routine handles the IPv4 level options.\r
\r
@param [in] OptionLength Length of the buffer in bytes\r
\r
@retval EFI_SUCCESS - Option successfully set\r
-\r
**/\r
EFI_STATUS\r
EslIp4OptionSet (\r
)\r
{\r
BOOLEAN bTrueFalse;\r
- socklen_t LengthInBytes;\r
- UINT8 * pOptionData;\r
+ //socklen_t LengthInBytes;\r
+ //UINT8 * pOptionData;\r
EFI_STATUS Status;\r
\r
DBG_ENTER ( );\r
\r
- //\r
// Assume success\r
- //\r
pSocket->errno = 0;\r
Status = EFI_SUCCESS;\r
\r
- //\r
// Determine if the option protocol matches\r
- //\r
- LengthInBytes = 0;\r
- pOptionData = NULL;\r
+ //LengthInBytes = 0;\r
+ //pOptionData = NULL;\r
switch ( OptionName ) {\r
default:\r
- //\r
// Protocol level not supported\r
- //\r
DEBUG (( DEBUG_INFO | DEBUG_OPTION, "ERROR - Invalid protocol option\r\n" ));\r
pSocket->errno = ENOTSUP;\r
Status = EFI_UNSUPPORTED;\r
\r
case IP_HDRINCL:\r
\r
- //\r
// Validate the option length\r
- //\r
if ( sizeof ( UINT32 ) == OptionLength ) {\r
- //\r
// Restrict the input to TRUE or FALSE\r
- //\r
bTrueFalse = TRUE;\r
if ( 0 == *(UINT32 *)pOptionValue ) {\r
bTrueFalse = FALSE;\r
}\r
pOptionValue = &bTrueFalse;\r
\r
- //\r
// Set the option value\r
- //\r
- pOptionData = (UINT8 *)&pSocket->bIncludeHeader;\r
- LengthInBytes = sizeof ( pSocket->bIncludeHeader );\r
+ //pOptionData = (UINT8 *)&pSocket->bIncludeHeader;\r
+ //LengthInBytes = sizeof ( pSocket->bIncludeHeader );\r
}\r
break;\r
}\r
-\r
- //\r
// Return the operation status\r
- //\r
DBG_EXIT_STATUS ( Status );\r
return Status;\r
}\r
@param [in] pPort Address of an ::ESL_PORT structure.\r
\r
@param [in] pPacket Address of an ::ESL_PACKET structure.\r
- \r
+\r
@param [in] pbConsumePacket Address of a BOOLEAN indicating if the packet is to be consumed\r
- \r
+\r
@param [in] BufferLength Length of the the buffer\r
- \r
+\r
@param [in] pBuffer Address of a buffer to receive the data.\r
- \r
+\r
@param [in] pDataLength Number of received data bytes in the buffer.\r
\r
@param [out] pAddress Network address to receive the remote system address\r
)\r
{\r
size_t LengthInBytes;\r
- ESL_PORT * pPort;\r
ESL_PACKET * pPacket;\r
EFI_IP4_RECEIVE_DATA * pRxData;\r
EFI_STATUS Status;\r
- \r
+\r
DBG_ENTER ( );\r
- \r
+\r
//\r
// Get the operation status.\r
//\r
- pPort = pIo->pPort;\r
Status = pIo->Token.Ip4Rx.Status;\r
\r
//\r
pRxData = pIo->Token.Ip4Rx.Packet.RxData;\r
LengthInBytes = pRxData->HeaderLength + pRxData->DataLength;\r
\r
- //\r
+ //{{\r
// +--------------------+ +----------------------+\r
// | ESL_IO_MGMT | | Data Buffer |\r
// | | | (Driver owned) |\r
//\r
//\r
// Save the data in the packet\r
- //\r
+ //}}\r
pPacket = pIo->pPacket;\r
pPacket->Op.Ip4Rx.pRxData = pRxData;\r
\r
that the socket is configured.\r
\r
@param [in] pSocket Address of an ::ESL_SOCKET structure\r
- \r
+\r
@retval EFI_SUCCESS - The port is connected\r
@retval EFI_NOT_STARTED - The port is not connected\r
\r
// Determine the socket configuration status\r
//\r
Status = pSocket->bConfigured ? EFI_SUCCESS : EFI_NOT_STARTED;\r
- \r
+\r
//\r
// Return the port connected state.\r
//\r
ESL_PACKET * pPacket;\r
ESL_SOCKET * pSocket;\r
EFI_STATUS Status;\r
- \r
+\r
DBG_ENTER ( );\r
- \r
+\r
//\r
// Locate the active transmit packet\r
//\r
)\r
{\r
UINTN DataSize;\r
- EFI_IP4_IPCONFIG_DATA * pIpConfigData;\r
- EFI_IP4_CONFIG_PROTOCOL * pIpConfigProtocol;\r
+ EFI_IP4_CONFIG2_INTERFACE_INFO * pIfInfo;\r
+ EFI_IP4_CONFIG2_PROTOCOL * pIpConfig2Protocol;\r
ESL_SERVICE * pService;\r
EFI_STATUS Status;\r
\r
//\r
// Use break instead of goto\r
//\r
- pIpConfigData = NULL;\r
+ pIfInfo = NULL;\r
for ( ; ; ) {\r
//\r
// Determine if the IP address is specified\r
// Open the configuration protocol\r
//\r
pService = pPort->pService;\r
- Status = gBS->OpenProtocol ( pService->Controller,\r
- &gEfiIp4ConfigProtocolGuid,\r
- (VOID **)&pIpConfigProtocol,\r
- NULL,\r
- NULL,\r
- EFI_OPEN_PROTOCOL_GET_PROTOCOL );\r
+ Status = gBS->OpenProtocol ( \r
+ pService->Controller,\r
+ &gEfiIp4Config2ProtocolGuid,\r
+ (VOID **)&pIpConfig2Protocol,\r
+ NULL,\r
+ NULL,\r
+ EFI_OPEN_PROTOCOL_GET_PROTOCOL \r
+ );\r
if ( EFI_ERROR ( Status )) {\r
DEBUG (( DEBUG_ERROR,\r
"ERROR - IP Configuration Protocol not available, Status: %r\r\n",\r
}\r
\r
//\r
- // Get the IP configuration data size\r
+ // Get the interface information size.\r
//\r
DataSize = 0;\r
- Status = pIpConfigProtocol->GetData ( pIpConfigProtocol,\r
- &DataSize,\r
- NULL );\r
+ Status = pIpConfig2Protocol->GetData ( \r
+ pIpConfig2Protocol,\r
+ Ip4Config2DataTypeInterfaceInfo,\r
+ &DataSize,\r
+ NULL\r
+ );\r
if ( EFI_BUFFER_TOO_SMALL != Status ) {\r
DEBUG (( DEBUG_ERROR,\r
- "ERROR - Failed to get IP Configuration data size, Status: %r\r\n",\r
+ "ERROR - Failed to get the interface information size, Status: %r\r\n",\r
Status ));\r
break;\r
}\r
\r
//\r
- // Allocate the configuration data buffer\r
+ // Allocate the interface information buffer\r
//\r
- pIpConfigData = AllocatePool ( DataSize );\r
- if ( NULL == pIpConfigData ) {\r
+ pIfInfo = AllocatePool ( DataSize );\r
+ if ( NULL == pIfInfo ) {\r
DEBUG (( DEBUG_ERROR,\r
- "ERROR - Not enough memory to allocate IP Configuration data!\r\n" ));\r
+ "ERROR - Not enough memory to allocate the interface information buffer!\r\n" ));\r
Status = EFI_OUT_OF_RESOURCES;\r
break;\r
}\r
\r
//\r
- // Get the IP configuration\r
+ // Get the interface info.\r
//\r
- Status = pIpConfigProtocol->GetData ( pIpConfigProtocol,\r
- &DataSize,\r
- pIpConfigData );\r
+ Status = pIpConfig2Protocol->GetData ( \r
+ pIpConfig2Protocol,\r
+ Ip4Config2DataTypeInterfaceInfo,\r
+ &DataSize,\r
+ pIfInfo\r
+ );\r
if ( EFI_ERROR ( Status )) {\r
DEBUG (( DEBUG_ERROR,\r
- "ERROR - Failed to return IP Configuration data, Status: %r\r\n",\r
+ "ERROR - Failed to return the interface info, Status: %r\r\n",\r
Status ));\r
break;\r
}\r
//\r
DEBUG (( DEBUG_BIND,\r
"Actual adapter IP address: %d.%d.%d.%d\r\n",\r
- pIpConfigData->StationAddress.Addr [ 0 ],\r
- pIpConfigData->StationAddress.Addr [ 1 ],\r
- pIpConfigData->StationAddress.Addr [ 2 ],\r
- pIpConfigData->StationAddress.Addr [ 3 ]));\r
+ pIfInfo->StationAddress.Addr [ 0 ],\r
+ pIfInfo->StationAddress.Addr [ 1 ],\r
+ pIfInfo->StationAddress.Addr [ 2 ],\r
+ pIfInfo->StationAddress.Addr [ 3 ]));\r
\r
//\r
// Assume the port is not configured\r
//\r
Status = EFI_SUCCESS;\r
- if (( pConfigData->StationAddress.Addr [ 0 ] == pIpConfigData->StationAddress.Addr [ 0 ])\r
- && ( pConfigData->StationAddress.Addr [ 1 ] == pIpConfigData->StationAddress.Addr [ 1 ])\r
- && ( pConfigData->StationAddress.Addr [ 2 ] == pIpConfigData->StationAddress.Addr [ 2 ])\r
- && ( pConfigData->StationAddress.Addr [ 3 ] == pIpConfigData->StationAddress.Addr [ 3 ])) {\r
+ if (( pConfigData->StationAddress.Addr [ 0 ] == pIfInfo->StationAddress.Addr [ 0 ])\r
+ && ( pConfigData->StationAddress.Addr [ 1 ] == pIfInfo->StationAddress.Addr [ 1 ])\r
+ && ( pConfigData->StationAddress.Addr [ 2 ] == pIfInfo->StationAddress.Addr [ 2 ])\r
+ && ( pConfigData->StationAddress.Addr [ 3 ] == pIfInfo->StationAddress.Addr [ 3 ])) {\r
break;\r
}\r
\r
//\r
// Free the buffer if necessary\r
//\r
- if ( NULL != pIpConfigData ) {\r
- FreePool ( pIpConfigData );\r
+ if ( NULL != pIfInfo ) {\r
+ FreePool ( pIfInfo );\r
}\r
\r
//\r
EslIp4TxBuffer,\r
EslIp4TxComplete,\r
NULL, // TxOobComplete\r
- EslIp4VerifyLocalIpAddress\r
+ (PFN_API_VERIFY_LOCAL_IP_ADDRESS)EslIp4VerifyLocalIpAddress\r
};\r
projects / mirror_edk2.git / blobdiff