;-------------------------------------------------------------------------------
include MpEqu.inc
+extern InitializeFloatingPointUnits:PROC
+
.code
+;-------------------------------------------------------------------------------------
+;RendezvousFunnelProc procedure follows. All APs execute their procedure. This
+;procedure serializes all the AP processors through an Init sequence. It must be
+;noted that APs arrive here very raw...ie: real mode, no stack.
+;ALSO THIS PROCEDURE IS EXECUTED BY APs ONLY ON 16 BIT MODE. HENCE THIS PROC
+;IS IN MACHINE CODE.
+;-------------------------------------------------------------------------------------
+RendezvousFunnelProc PROC PUBLIC
+RendezvousFunnelProcStart::
+; At this point CS = 0x(vv00) and ip= 0x0.
+; Save BIST information to ebp firstly
+ db 66h, 08bh, 0e8h ; mov ebp, eax ; save BIST information
+
+ db 8ch,0c8h ; mov ax,cs
+ db 8eh,0d8h ; mov ds,ax
+ db 8eh,0c0h ; mov es,ax
+ db 8eh,0d0h ; mov ss,ax
+ db 33h,0c0h ; xor ax,ax
+ db 8eh,0e0h ; mov fs,ax
+ db 8eh,0e8h ; mov gs,ax
+
+ db 0BEh ; opcode of mov si, mem16
+ dw BufferStartLocation ; mov si, BufferStartLocation
+ db 66h, 8Bh, 1Ch ; mov ebx,dword ptr [si]
+
+ db 0BFh ; opcode of mov di, mem16
+ dw PmodeOffsetLocation ; mov di, PmodeOffsetLocation
+ db 66h, 8Bh, 05h ; mov eax,dword ptr [di]
+ db 8Bh, 0F8h ; mov di, ax
+ db 83h, 0EFh,06h ; sub di, 06h
+ db 66h, 03h, 0C3h ; add eax, ebx
+ db 66h, 89h, 05h ; mov dword ptr [di],eax
+
+ db 0BFh ; opcode of mov di, mem16
+ dw LmodeOffsetLocation ; mov di, LmodeOffsetLocation
+ db 66h, 8Bh, 05h ; mov eax,dword ptr [di]
+ db 8Bh, 0F8h ; mov di, ax
+ db 83h, 0EFh,06h ; sub di, 06h
+ db 66h, 03h, 0C3h ; add eax, ebx
+ db 66h, 89h, 05h ; mov dword ptr [di],eax
+
+ db 0BEh
+ dw Cr3Location ; mov si, Cr3Location
+ db 66h, 8Bh, 0Ch ; mov ecx,dword ptr [si] ; ECX is keeping the value of CR3
+
+ db 0BEh ; opcode of mov si, mem16
+ dw GdtrLocation ; mov si, GdtrLocation
+ db 66h ; db 66h
+ db 2Eh, 0Fh, 01h, 14h ; lgdt fword ptr cs:[si]
+
+ db 0BEh
+ dw IdtrLocation ; mov si, IdtrLocation
+ db 66h ; db 66h
+ db 2Eh,0Fh, 01h, 1Ch ; lidt fword ptr cs:[si]
+
+ db 33h, 0C0h ; xor ax, ax
+ db 8Eh, 0D8h ; mov ds, ax
+
+ db 0Fh, 20h, 0C0h ; mov eax, cr0 ;Get control register 0
+ db 66h, 83h, 0C8h, 03h ; or eax, 000000003h ;Set PE bit (bit #0) & MP
+ db 0Fh, 22h, 0C0h ; mov cr0, eax
+
+ db 66h, 67h, 0EAh ; far jump
+ dd 0h ; 32-bit offset
+ dw PROTECT_MODE_CS ; 16-bit selector
+
+Flat32Start:: ; protected mode entry point
+ mov ax, PROTECT_MODE_DS
+ mov ds, ax
+ mov es, ax
+ mov fs, ax
+ mov gs, ax
+ mov ss, ax
+
+ db 0Fh, 20h, 0E0h ; mov eax, cr4
+ db 0Fh, 0BAh, 0E8h, 05h ; bts eax, 5
+ db 0Fh, 22h, 0E0h ; mov cr4, eax
+
+ db 0Fh, 22h, 0D9h ; mov cr3, ecx
+
+ db 0B9h
+ dd 0C0000080h ; mov ecx, 0c0000080h ; EFER MSR number.
+ db 0Fh, 32h ; rdmsr ; Read EFER.
+ db 0Fh, 0BAh, 0E8h, 08h ; bts eax, 8 ; Set LME=1.
+ db 0Fh, 30h ; wrmsr ; Write EFER.
+
+ db 0Fh, 20h, 0C0h ; mov eax, cr0 ; Read CR0.
+ db 0Fh, 0BAh, 0E8h, 1Fh ; bts eax, 31 ; Set PG=1.
+ db 0Fh, 22h, 0C0h ; mov cr0, eax ; Write CR0.
+
+LONG_JUMP:
+ db 67h, 0EAh ; far jump
+ dd 0h ; 32-bit offset
+ dw LONG_MODE_CS ; 16-bit selector
+
+LongModeStart::
+ mov ax, LONG_MODE_DS
+ mov ds, ax
+ mov es, ax
+ mov ss, ax
+
+ mov esi, ebx
+ mov edi, esi
+ add edi, LockLocation
+ mov rax, NotVacantFlag
+
+TestLock:
+ xchg qword ptr [edi], rax
+ cmp rax, NotVacantFlag
+ jz TestLock
+
+ mov edi, esi
+ add edi, NumApsExecutingLoction
+ inc dword ptr [edi]
+ mov ebx, dword ptr [edi]
+
+ProgramStack:
+ mov edi, esi
+ add edi, StackSizeLocation
+ mov rax, qword ptr [edi]
+ mov edi, esi
+ add edi, StackStartAddressLocation
+ add rax, qword ptr [edi]
+ mov rsp, rax
+ mov qword ptr [edi], rax
+
+Releaselock:
+ mov rax, VacantFlag
+ mov edi, esi
+ add edi, LockLocation
+ xchg qword ptr [edi], rax
+
+CProcedureInvoke:
+ push rbp ; push BIST data
+ xor rbp, rbp ; clear ebp for call stack trace
+ push rbp
+ mov rbp, rsp
+
+ mov rax, InitializeFloatingPointUnits
+ sub rsp, 20h
+ call rax ; Call assembly function to initialize FPU per UEFI spec
+ add rsp, 20h
+
+ mov edx, ebx ; edx is NumApsExecuting
+ mov ecx, esi
+ add ecx, LockLocation ; rcx is address of exchange info data buffer
+
+ mov edi, esi
+ add edi, ApProcedureLocation
+ mov rax, qword ptr [edi]
+
+ sub rsp, 20h
+ call rax ; invoke C function
+ add rsp, 20h
+ jmp $
+
+RendezvousFunnelProc ENDP
+RendezvousFunnelProcEnd::
+
+;-------------------------------------------------------------------------------------
+; AsmGetAddressMap (&AddressMap);
+;-------------------------------------------------------------------------------------
+AsmGetAddressMap PROC
+ mov rax, offset RendezvousFunnelProcStart
+ mov qword ptr [rcx], rax
+ mov qword ptr [rcx + 8h], Flat32Start - RendezvousFunnelProcStart
+ mov qword ptr [rcx + 10h], LongModeStart - RendezvousFunnelProcStart
+ mov qword ptr [rcx + 18h], RendezvousFunnelProcEnd - RendezvousFunnelProcStart
+ ret
+AsmGetAddressMap ENDP
+
+;-------------------------------------------------------------------------------------
+;AsmExchangeRole procedure follows. This procedure executed by current BSP, that is
+;about to become an AP. It switches it'stack with the current AP.
+;AsmExchangeRole (IN CPU_EXCHANGE_INFO *MyInfo, IN CPU_EXCHANGE_INFO *OthersInfo);
+;-------------------------------------------------------------------------------------
+AsmExchangeRole PROC
+ ; DO NOT call other functions in this function, since 2 CPU may use 1 stack
+ ; at the same time. If 1 CPU try to call a function, stack will be corrupted.
+
+ push rax
+ push rbx
+ push rcx
+ push rdx
+ push rsi
+ push rdi
+ push rbp
+ push r8
+ push r9
+ push r10
+ push r11
+ push r12
+ push r13
+ push r14
+ push r15
+
+ mov rax, cr0
+ push rax
+
+ mov rax, cr4
+ push rax
+
+ ; rsi contains MyInfo pointer
+ mov rsi, rcx
+
+ ; rdi contains OthersInfo pointer
+ mov rdi, rdx
+ ;Store EFLAGS, GDTR and IDTR regiter to stack
+ pushfq
+ sgdt fword ptr [rsi + 16]
+ sidt fword ptr [rsi + 26]
+
+ ; Store the its StackPointer
+ mov qword ptr [rsi + 8], rsp
+
+ ; update its switch state to STORED
+ mov byte ptr [rsi], CPU_SWITCH_STATE_STORED
+
+WaitForOtherStored:
+ ; wait until the other CPU finish storing its state
+ cmp byte ptr [rdi], CPU_SWITCH_STATE_STORED
+ jz OtherStored
+ pause
+ jmp WaitForOtherStored
+
+OtherStored:
+ ; Since another CPU already stored its state, load them
+ ; load GDTR value
+ lgdt fword ptr [rdi + 16]
+
+ ; load IDTR value
+ lidt fword ptr [rdi + 26]
+
+ ; load its future StackPointer
+ mov rsp, qword ptr [rdi + 8]
+
+ ; update the other CPU's switch state to LOADED
+ mov byte ptr [rdi], CPU_SWITCH_STATE_LOADED
+
+WaitForOtherLoaded:
+ ; wait until the other CPU finish loading new state,
+ ; otherwise the data in stack may corrupt
+ cmp byte ptr [rsi], CPU_SWITCH_STATE_LOADED
+ jz OtherLoaded
+ pause
+ jmp WaitForOtherLoaded
+
+OtherLoaded:
+ ; since the other CPU already get the data it want, leave this procedure
+ popfq
+
+ pop rax
+ mov cr4, rax
+
+ pop rax
+ mov cr0, rax
+
+ pop r15
+ pop r14
+ pop r13
+ pop r12
+ pop r11
+ pop r10
+ pop r9
+ pop r8
+ pop rbp
+ pop rdi
+ pop rsi
+ pop rdx
+ pop rcx
+ pop rbx
+ pop rax
+
+ ret
+AsmExchangeRole ENDP
AsmInitializeGdt PROC
push rbp
projects / mirror_edk2.git / blobdiff