}\r
}\r
\r
+/**\r
+ Calculate timeout value and return the current performance counter value.\r
+\r
+ Calculate the number of performance counter ticks required for a timeout.\r
+ If TimeoutInMicroseconds is 0, return value is also 0, which is recognized\r
+ as infinity.\r
+\r
+ @param[in] TimeoutInMicroseconds Timeout value in microseconds.\r
+ @param[out] CurrentTime Returns the current value of the performance counter.\r
+\r
+ @return Expected time stamp counter for timeout.\r
+ If TimeoutInMicroseconds is 0, return value is also 0, which is recognized\r
+ as infinity.\r
+\r
+**/\r
+UINT64\r
+CalculateTimeout (\r
+ IN UINTN TimeoutInMicroseconds,\r
+ OUT UINT64 *CurrentTime\r
+ )\r
+{\r
+ //\r
+ // Read the current value of the performance counter\r
+ //\r
+ *CurrentTime = GetPerformanceCounter ();\r
+\r
+ //\r
+ // If TimeoutInMicroseconds is 0, return value is also 0, which is recognized\r
+ // as infinity.\r
+ //\r
+ if (TimeoutInMicroseconds == 0) {\r
+ return 0;\r
+ }\r
+\r
+ //\r
+ // GetPerformanceCounterProperties () returns the timestamp counter's frequency\r
+ // in Hz. So multiply the return value with TimeoutInMicroseconds and then divide\r
+ // it by 1,000,000, to get the number of ticks for the timeout value.\r
+ //\r
+ return DivU64x32 (\r
+ MultU64x64 (\r
+ GetPerformanceCounterProperties (NULL, NULL),\r
+ TimeoutInMicroseconds\r
+ ),\r
+ 1000000\r
+ );\r
+}\r
+\r
+/**\r
+ Checks whether timeout expires.\r
+\r
+ Check whether the number of elapsed performance counter ticks required for\r
+ a timeout condition has been reached.\r
+ If Timeout is zero, which means infinity, return value is always FALSE.\r
+\r
+ @param[in, out] PreviousTime On input, the value of the performance counter\r
+ when it was last read.\r
+ On output, the current value of the performance\r
+ counter\r
+ @param[in] TotalTime The total amount of elapsed time in performance\r
+ counter ticks.\r
+ @param[in] Timeout The number of performance counter ticks required\r
+ to reach a timeout condition.\r
+\r
+ @retval TRUE A timeout condition has been reached.\r
+ @retval FALSE A timeout condition has not been reached.\r
+\r
+**/\r
+BOOLEAN\r
+CheckTimeout (\r
+ IN OUT UINT64 *PreviousTime,\r
+ IN UINT64 *TotalTime,\r
+ IN UINT64 Timeout\r
+ )\r
+{\r
+ UINT64 Start;\r
+ UINT64 End;\r
+ UINT64 CurrentTime;\r
+ INT64 Delta;\r
+ INT64 Cycle;\r
+\r
+ if (Timeout == 0) {\r
+ return FALSE;\r
+ }\r
+ GetPerformanceCounterProperties (&Start, &End);\r
+ Cycle = End - Start;\r
+ if (Cycle < 0) {\r
+ Cycle = -Cycle;\r
+ }\r
+ Cycle++;\r
+ CurrentTime = GetPerformanceCounter();\r
+ Delta = (INT64) (CurrentTime - *PreviousTime);\r
+ if (Start > End) {\r
+ Delta = -Delta;\r
+ }\r
+ if (Delta < 0) {\r
+ Delta += Cycle;\r
+ }\r
+ *TotalTime += Delta;\r
+ *PreviousTime = CurrentTime;\r
+ if (*TotalTime > Timeout) {\r
+ return TRUE;\r
+ }\r
+ return FALSE;\r
+}\r
+\r
+/**\r
+ Reset an AP to Idle state.\r
+\r
+ Any task being executed by the AP will be aborted and the AP\r
+ will be waiting for a new task in Wait-For-SIPI state.\r
+\r
+ @param[in] ProcessorNumber The handle number of processor.\r
+**/\r
+VOID\r
+ResetProcessorToIdleState (\r
+ IN UINTN ProcessorNumber\r
+ )\r
+{\r
+ CPU_MP_DATA *CpuMpData;\r
+\r
+ CpuMpData = GetCpuMpData ();\r
+\r
+ WakeUpAP (CpuMpData, FALSE, ProcessorNumber, NULL, NULL);\r
+\r
+ SetApState (&CpuMpData->CpuData[ProcessorNumber], CpuStateIdle);\r
+}\r
+\r
+/**\r
+ Searches for the next waiting AP.\r
+\r
+ Search for the next AP that is put in waiting state by single-threaded StartupAllAPs().\r
+\r
+ @param[out] NextProcessorNumber Pointer to the processor number of the next waiting AP.\r
+\r
+ @retval EFI_SUCCESS The next waiting AP has been found.\r
+ @retval EFI_NOT_FOUND No waiting AP exists.\r
+\r
+**/\r
+EFI_STATUS\r
+GetNextWaitingProcessorNumber (\r
+ OUT UINTN *NextProcessorNumber\r
+ )\r
+{\r
+ UINTN ProcessorNumber;\r
+ CPU_MP_DATA *CpuMpData;\r
+\r
+ CpuMpData = GetCpuMpData ();\r
+\r
+ for (ProcessorNumber = 0; ProcessorNumber < CpuMpData->CpuCount; ProcessorNumber++) {\r
+ if (CpuMpData->CpuData[ProcessorNumber].Waiting) {\r
+ *NextProcessorNumber = ProcessorNumber;\r
+ return EFI_SUCCESS;\r
+ }\r
+ }\r
+\r
+ return EFI_NOT_FOUND;\r
+}\r
+\r
+/** Checks status of specified AP.\r
+\r
+ This function checks whether the specified AP has finished the task assigned\r
+ by StartupThisAP(), and whether timeout expires.\r
+\r
+ @param[in] ProcessorNumber The handle number of processor.\r
+\r
+ @retval EFI_SUCCESS Specified AP has finished task assigned by StartupThisAPs().\r
+ @retval EFI_TIMEOUT The timeout expires.\r
+ @retval EFI_NOT_READY Specified AP has not finished task and timeout has not expired.\r
+**/\r
+EFI_STATUS\r
+CheckThisAP (\r
+ IN UINTN ProcessorNumber\r
+ )\r
+{\r
+ CPU_MP_DATA *CpuMpData;\r
+ CPU_AP_DATA *CpuData;\r
+\r
+ CpuMpData = GetCpuMpData ();\r
+ CpuData = &CpuMpData->CpuData[ProcessorNumber];\r
+\r
+ //\r
+ // Check the CPU state of AP. If it is CpuStateFinished, then the AP has finished its task.\r
+ // Only BSP and corresponding AP access this unit of CPU Data. This means the AP will not modify the\r
+ // value of state after setting the it to CpuStateFinished, so BSP can safely make use of its value.\r
+ //\r
+ //\r
+ // If the AP finishes for StartupThisAP(), return EFI_SUCCESS.\r
+ //\r
+ if (GetApState(CpuData) == CpuStateFinished) {\r
+ if (CpuData->Finished != NULL) {\r
+ *(CpuData->Finished) = TRUE;\r
+ }\r
+ SetApState (CpuData, CpuStateIdle);\r
+ return EFI_SUCCESS;\r
+ } else {\r
+ //\r
+ // If timeout expires for StartupThisAP(), report timeout.\r
+ //\r
+ if (CheckTimeout (&CpuData->CurrentTime, &CpuData->TotalTime, CpuData->ExpectedTime)) {\r
+ if (CpuData->Finished != NULL) {\r
+ *(CpuData->Finished) = FALSE;\r
+ }\r
+ //\r
+ // Reset failed AP to idle state\r
+ //\r
+ ResetProcessorToIdleState (ProcessorNumber);\r
+\r
+ return EFI_TIMEOUT;\r
+ }\r
+ }\r
+ return EFI_NOT_READY;\r
+}\r
+\r
+/**\r
+ Checks status of all APs.\r
+\r
+ This function checks whether all APs have finished task assigned by StartupAllAPs(),\r
+ and whether timeout expires.\r
+\r
+ @retval EFI_SUCCESS All APs have finished task assigned by StartupAllAPs().\r
+ @retval EFI_TIMEOUT The timeout expires.\r
+ @retval EFI_NOT_READY APs have not finished task and timeout has not expired.\r
+**/\r
+EFI_STATUS\r
+CheckAllAPs (\r
+ VOID\r
+ )\r
+{\r
+ UINTN ProcessorNumber;\r
+ UINTN NextProcessorNumber;\r
+ UINTN ListIndex;\r
+ EFI_STATUS Status;\r
+ CPU_MP_DATA *CpuMpData;\r
+ CPU_AP_DATA *CpuData;\r
+\r
+ CpuMpData = GetCpuMpData ();\r
+\r
+ NextProcessorNumber = 0;\r
+\r
+ //\r
+ // Go through all APs that are responsible for the StartupAllAPs().\r
+ //\r
+ for (ProcessorNumber = 0; ProcessorNumber < CpuMpData->CpuCount; ProcessorNumber++) {\r
+ if (!CpuMpData->CpuData[ProcessorNumber].Waiting) {\r
+ continue;\r
+ }\r
+\r
+ CpuData = &CpuMpData->CpuData[ProcessorNumber];\r
+ //\r
+ // Check the CPU state of AP. If it is CpuStateFinished, then the AP has finished its task.\r
+ // Only BSP and corresponding AP access this unit of CPU Data. This means the AP will not modify the\r
+ // value of state after setting the it to CpuStateFinished, so BSP can safely make use of its value.\r
+ //\r
+ if (GetApState(CpuData) == CpuStateFinished) {\r
+ CpuMpData->RunningCount ++;\r
+ CpuMpData->CpuData[ProcessorNumber].Waiting = FALSE;\r
+ SetApState(CpuData, CpuStateIdle);\r
+\r
+ //\r
+ // If in Single Thread mode, then search for the next waiting AP for execution.\r
+ //\r
+ if (CpuMpData->SingleThread) {\r
+ Status = GetNextWaitingProcessorNumber (&NextProcessorNumber);\r
+\r
+ if (!EFI_ERROR (Status)) {\r
+ WakeUpAP (\r
+ CpuMpData,\r
+ FALSE,\r
+ (UINT32) NextProcessorNumber,\r
+ CpuMpData->Procedure,\r
+ CpuMpData->ProcArguments\r
+ );\r
+ }\r
+ }\r
+ }\r
+ }\r
+\r
+ //\r
+ // If all APs finish, return EFI_SUCCESS.\r
+ //\r
+ if (CpuMpData->RunningCount == CpuMpData->StartCount) {\r
+ return EFI_SUCCESS;\r
+ }\r
+\r
+ //\r
+ // If timeout expires, report timeout.\r
+ //\r
+ if (CheckTimeout (\r
+ &CpuMpData->CurrentTime,\r
+ &CpuMpData->TotalTime,\r
+ CpuMpData->ExpectedTime)\r
+ ) {\r
+ //\r
+ // If FailedCpuList is not NULL, record all failed APs in it.\r
+ //\r
+ if (CpuMpData->FailedCpuList != NULL) {\r
+ *CpuMpData->FailedCpuList =\r
+ AllocatePool ((CpuMpData->StartCount - CpuMpData->FinishedCount + 1) * sizeof (UINTN));\r
+ ASSERT (*CpuMpData->FailedCpuList != NULL);\r
+ }\r
+ ListIndex = 0;\r
+\r
+ for (ProcessorNumber = 0; ProcessorNumber < CpuMpData->CpuCount; ProcessorNumber++) {\r
+ //\r
+ // Check whether this processor is responsible for StartupAllAPs().\r
+ //\r
+ if (CpuMpData->CpuData[ProcessorNumber].Waiting) {\r
+ //\r
+ // Reset failed APs to idle state\r
+ //\r
+ ResetProcessorToIdleState (ProcessorNumber);\r
+ CpuMpData->CpuData[ProcessorNumber].Waiting = FALSE;\r
+ if (CpuMpData->FailedCpuList != NULL) {\r
+ (*CpuMpData->FailedCpuList)[ListIndex++] = ProcessorNumber;\r
+ }\r
+ }\r
+ }\r
+ if (CpuMpData->FailedCpuList != NULL) {\r
+ (*CpuMpData->FailedCpuList)[ListIndex] = END_OF_CPU_LIST;\r
+ }\r
+ return EFI_TIMEOUT;\r
+ }\r
+ return EFI_NOT_READY;\r
+}\r
+\r
/**\r
MP Initialize Library initialization.\r
\r
projects / mirror_edk2.git / blobdiff