/** @file\r
CPU MP Initialize Library common functions.\r
\r
- Copyright (c) 2016 - 2017, Intel Corporation. All rights reserved.<BR>\r
- This program and the accompanying materials\r
- are licensed and made available under the terms and conditions of the BSD License\r
- which accompanies this distribution. The full text of the license may be found at\r
- http://opensource.org/licenses/bsd-license.php\r
+ Copyright (c) 2016 - 2022, Intel Corporation. All rights reserved.<BR>\r
+ Copyright (c) 2020, AMD Inc. All rights reserved.<BR>\r
\r
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
+ SPDX-License-Identifier: BSD-2-Clause-Patent\r
\r
**/\r
\r
#include "MpLib.h"\r
+#include <Library/CcExitLib.h>\r
+#include <Register/Amd/Fam17Msr.h>\r
+#include <Register/Amd/Ghcb.h>\r
\r
-EFI_GUID mCpuInitMpLibHobGuid = CPU_INIT_MP_LIB_HOB_GUID;\r
+EFI_GUID mCpuInitMpLibHobGuid = CPU_INIT_MP_LIB_HOB_GUID;\r
+\r
+/**\r
+ Save the volatile registers required to be restored following INIT IPI.\r
+\r
+ @param[out] VolatileRegisters Returns buffer saved the volatile resisters\r
+**/\r
+VOID\r
+SaveVolatileRegisters (\r
+ OUT CPU_VOLATILE_REGISTERS *VolatileRegisters\r
+ );\r
+\r
+/**\r
+ Restore the volatile registers following INIT IPI.\r
+\r
+ @param[in] VolatileRegisters Pointer to volatile resisters\r
+ @param[in] IsRestoreDr TRUE: Restore DRx if supported\r
+ FALSE: Do not restore DRx\r
+**/\r
+VOID\r
+RestoreVolatileRegisters (\r
+ IN CPU_VOLATILE_REGISTERS *VolatileRegisters,\r
+ IN BOOLEAN IsRestoreDr\r
+ );\r
\r
/**\r
The function will check if BSP Execute Disable is enabled.\r
BOOLEAN Enabled;\r
IA32_CR0 Cr0;\r
\r
- Enabled = FALSE;\r
+ Enabled = FALSE;\r
Cr0.UintN = AsmReadCr0 ();\r
if (Cr0.Bits.PG != 0) {\r
//\r
VOID\r
EFIAPI\r
FutureBSPProc (\r
- IN VOID *Buffer\r
+ IN VOID *Buffer\r
)\r
{\r
- CPU_MP_DATA *DataInHob;\r
+ CPU_MP_DATA *DataInHob;\r
\r
- DataInHob = (CPU_MP_DATA *) Buffer;\r
+ DataInHob = (CPU_MP_DATA *)Buffer;\r
+ //\r
+ // Save and restore volatile registers when switch BSP\r
+ //\r
+ SaveVolatileRegisters (&DataInHob->APInfo.VolatileRegisters);\r
AsmExchangeRole (&DataInHob->APInfo, &DataInHob->BSPInfo);\r
+ RestoreVolatileRegisters (&DataInHob->APInfo.VolatileRegisters, FALSE);\r
}\r
\r
/**\r
**/\r
CPU_STATE\r
GetApState (\r
- IN CPU_AP_DATA *CpuData\r
+ IN CPU_AP_DATA *CpuData\r
)\r
{\r
return CpuData->State;\r
**/\r
VOID\r
SetApState (\r
- IN CPU_AP_DATA *CpuData,\r
- IN CPU_STATE State\r
+ IN CPU_AP_DATA *CpuData,\r
+ IN CPU_STATE State\r
)\r
{\r
AcquireSpinLock (&CpuData->ApLock);\r
**/\r
VOID\r
SaveLocalApicTimerSetting (\r
- IN CPU_MP_DATA *CpuMpData\r
+ IN CPU_MP_DATA *CpuMpData\r
)\r
{\r
//\r
**/\r
VOID\r
SyncLocalApicTimerSetting (\r
- IN CPU_MP_DATA *CpuMpData\r
+ IN CPU_MP_DATA *CpuMpData\r
)\r
{\r
//\r
**/\r
VOID\r
SaveVolatileRegisters (\r
- OUT CPU_VOLATILE_REGISTERS *VolatileRegisters\r
+ OUT CPU_VOLATILE_REGISTERS *VolatileRegisters\r
)\r
{\r
- CPUID_VERSION_INFO_EDX VersionInfoEdx;\r
+ CPUID_VERSION_INFO_EDX VersionInfoEdx;\r
\r
VolatileRegisters->Cr0 = AsmReadCr0 ();\r
VolatileRegisters->Cr3 = AsmReadCr3 ();\r
VolatileRegisters->Dr6 = AsmReadDr6 ();\r
VolatileRegisters->Dr7 = AsmReadDr7 ();\r
}\r
+\r
+ AsmReadGdtr (&VolatileRegisters->Gdtr);\r
+ AsmReadIdtr (&VolatileRegisters->Idtr);\r
+ VolatileRegisters->Tr = AsmReadTr ();\r
}\r
\r
/**\r
**/\r
VOID\r
RestoreVolatileRegisters (\r
- IN CPU_VOLATILE_REGISTERS *VolatileRegisters,\r
- IN BOOLEAN IsRestoreDr\r
+ IN CPU_VOLATILE_REGISTERS *VolatileRegisters,\r
+ IN BOOLEAN IsRestoreDr\r
)\r
{\r
- CPUID_VERSION_INFO_EDX VersionInfoEdx;\r
+ CPUID_VERSION_INFO_EDX VersionInfoEdx;\r
+ IA32_TSS_DESCRIPTOR *Tss;\r
\r
- AsmWriteCr0 (VolatileRegisters->Cr0);\r
AsmWriteCr3 (VolatileRegisters->Cr3);\r
AsmWriteCr4 (VolatileRegisters->Cr4);\r
+ AsmWriteCr0 (VolatileRegisters->Cr0);\r
\r
if (IsRestoreDr) {\r
AsmCpuid (CPUID_VERSION_INFO, NULL, NULL, NULL, &VersionInfoEdx.Uint32);\r
AsmWriteDr7 (VolatileRegisters->Dr7);\r
}\r
}\r
+\r
+ AsmWriteGdtr (&VolatileRegisters->Gdtr);\r
+ AsmWriteIdtr (&VolatileRegisters->Idtr);\r
+ if ((VolatileRegisters->Tr != 0) &&\r
+ (VolatileRegisters->Tr < VolatileRegisters->Gdtr.Limit))\r
+ {\r
+ Tss = (IA32_TSS_DESCRIPTOR *)(VolatileRegisters->Gdtr.Base +\r
+ VolatileRegisters->Tr);\r
+ if (Tss->Bits.P == 1) {\r
+ Tss->Bits.Type &= 0xD; // 1101 - Clear busy bit just in case\r
+ AsmWriteTr (VolatileRegisters->Tr);\r
+ }\r
+ }\r
}\r
\r
/**\r
VOID\r
)\r
{\r
- CPUID_VERSION_INFO_ECX VersionInfoEcx;\r
+ CPUID_VERSION_INFO_ECX VersionInfoEcx;\r
\r
AsmCpuid (CPUID_VERSION_INFO, NULL, NULL, &VersionInfoEcx.Uint32, NULL);\r
return (VersionInfoEcx.Bits.MONITOR == 1) ? TRUE : FALSE;\r
**/\r
UINT8\r
GetApLoopMode (\r
- OUT UINT32 *MonitorFilterSize\r
+ OUT UINT32 *MonitorFilterSize\r
)\r
{\r
- UINT8 ApLoopMode;\r
- CPUID_MONITOR_MWAIT_EBX MonitorMwaitEbx;\r
+ UINT8 ApLoopMode;\r
+ CPUID_MONITOR_MWAIT_EBX MonitorMwaitEbx;\r
\r
ASSERT (MonitorFilterSize != NULL);\r
\r
//\r
ApLoopMode = ApInHltLoop;\r
}\r
+\r
+ if (ConfidentialComputingGuestHas (CCAttrAmdSevEs) &&\r
+ !ConfidentialComputingGuestHas (CCAttrAmdSevSnp))\r
+ {\r
+ //\r
+ // For SEV-ES (SEV-SNP is also considered SEV-ES), force AP in Hlt-loop\r
+ // mode in order to use the GHCB protocol for starting APs\r
+ //\r
+ ApLoopMode = ApInHltLoop;\r
+ }\r
}\r
\r
if (ApLoopMode != ApInMwaitLoop) {\r
**/\r
VOID\r
SortApicId (\r
- IN CPU_MP_DATA *CpuMpData\r
+ IN CPU_MP_DATA *CpuMpData\r
)\r
{\r
- UINTN Index1;\r
- UINTN Index2;\r
- UINTN Index3;\r
- UINT32 ApicId;\r
- CPU_INFO_IN_HOB CpuInfo;\r
- UINT32 ApCount;\r
- CPU_INFO_IN_HOB *CpuInfoInHob;\r
-\r
- ApCount = CpuMpData->CpuCount - 1;\r
- CpuInfoInHob = (CPU_INFO_IN_HOB *) (UINTN) CpuMpData->CpuInfoInHob;\r
+ UINTN Index1;\r
+ UINTN Index2;\r
+ UINTN Index3;\r
+ UINT32 ApicId;\r
+ CPU_INFO_IN_HOB CpuInfo;\r
+ UINT32 ApCount;\r
+ CPU_INFO_IN_HOB *CpuInfoInHob;\r
+ volatile UINT32 *StartupApSignal;\r
+\r
+ ApCount = CpuMpData->CpuCount - 1;\r
+ CpuInfoInHob = (CPU_INFO_IN_HOB *)(UINTN)CpuMpData->CpuInfoInHob;\r
if (ApCount != 0) {\r
for (Index1 = 0; Index1 < ApCount; Index1++) {\r
Index3 = Index1;\r
ApicId = CpuInfoInHob[Index2].ApicId;\r
}\r
}\r
+\r
if (Index3 != Index1) {\r
CopyMem (&CpuInfo, &CpuInfoInHob[Index3], sizeof (CPU_INFO_IN_HOB));\r
CopyMem (\r
sizeof (CPU_INFO_IN_HOB)\r
);\r
CopyMem (&CpuInfoInHob[Index1], &CpuInfo, sizeof (CPU_INFO_IN_HOB));\r
+\r
+ //\r
+ // Also exchange the StartupApSignal.\r
+ //\r
+ StartupApSignal = CpuMpData->CpuData[Index3].StartupApSignal;\r
+ CpuMpData->CpuData[Index3].StartupApSignal =\r
+ CpuMpData->CpuData[Index1].StartupApSignal;\r
+ CpuMpData->CpuData[Index1].StartupApSignal = StartupApSignal;\r
}\r
}\r
\r
ApicId = GetInitialApicId ();\r
for (Index1 = 0; Index1 < CpuMpData->CpuCount; Index1++) {\r
if (CpuInfoInHob[Index1].ApicId == ApicId) {\r
- CpuMpData->BspNumber = (UINT32) Index1;\r
+ CpuMpData->BspNumber = (UINT32)Index1;\r
break;\r
}\r
}\r
)\r
{\r
CPU_MP_DATA *CpuMpData;\r
+ UINTN ProcessorNumber;\r
+ EFI_STATUS Status;\r
\r
- CpuMpData = (CPU_MP_DATA *) Buffer;\r
+ CpuMpData = (CPU_MP_DATA *)Buffer;\r
+ Status = GetProcessorNumber (CpuMpData, &ProcessorNumber);\r
+ ASSERT_EFI_ERROR (Status);\r
//\r
// Load microcode on AP\r
//\r
- MicrocodeDetect (CpuMpData);\r
+ MicrocodeDetect (CpuMpData, ProcessorNumber);\r
//\r
// Sync BSP's MTRR table to AP\r
//\r
**/\r
EFI_STATUS\r
GetProcessorNumber (\r
- IN CPU_MP_DATA *CpuMpData,\r
- OUT UINTN *ProcessorNumber\r
+ IN CPU_MP_DATA *CpuMpData,\r
+ OUT UINTN *ProcessorNumber\r
)\r
{\r
- UINTN TotalProcessorNumber;\r
- UINTN Index;\r
- CPU_INFO_IN_HOB *CpuInfoInHob;\r
+ UINTN TotalProcessorNumber;\r
+ UINTN Index;\r
+ CPU_INFO_IN_HOB *CpuInfoInHob;\r
+ UINT32 CurrentApicId;\r
\r
- CpuInfoInHob = (CPU_INFO_IN_HOB *) (UINTN) CpuMpData->CpuInfoInHob;\r
+ CpuInfoInHob = (CPU_INFO_IN_HOB *)(UINTN)CpuMpData->CpuInfoInHob;\r
\r
TotalProcessorNumber = CpuMpData->CpuCount;\r
- for (Index = 0; Index < TotalProcessorNumber; Index ++) {\r
- if (CpuInfoInHob[Index].ApicId == GetApicId ()) {\r
+ CurrentApicId = GetApicId ();\r
+ for (Index = 0; Index < TotalProcessorNumber; Index++) {\r
+ if (CpuInfoInHob[Index].ApicId == CurrentApicId) {\r
*ProcessorNumber = Index;\r
return EFI_SUCCESS;\r
}\r
}\r
+\r
return EFI_NOT_FOUND;\r
}\r
\r
**/\r
UINTN\r
CollectProcessorCount (\r
- IN CPU_MP_DATA *CpuMpData\r
+ IN CPU_MP_DATA *CpuMpData\r
)\r
{\r
- UINTN Index;\r
+ UINTN Index;\r
+ CPU_INFO_IN_HOB *CpuInfoInHob;\r
+ BOOLEAN X2Apic;\r
\r
//\r
// Send 1st broadcast IPI to APs to wakeup APs\r
//\r
- CpuMpData->InitFlag = ApInitConfig;\r
- CpuMpData->X2ApicEnable = FALSE;\r
- WakeUpAP (CpuMpData, TRUE, 0, NULL, NULL);\r
+ CpuMpData->InitFlag = ApInitConfig;\r
+ WakeUpAP (CpuMpData, TRUE, 0, NULL, NULL, TRUE);\r
CpuMpData->InitFlag = ApInitDone;\r
- ASSERT (CpuMpData->CpuCount <= PcdGet32 (PcdCpuMaxLogicalProcessorNumber));\r
//\r
- // Wait for all APs finished the initialization\r
+ // When InitFlag == ApInitConfig, WakeUpAP () guarantees all APs are checked in.\r
+ // FinishedCount is the number of check-in APs.\r
//\r
- while (CpuMpData->FinishedCount < (CpuMpData->CpuCount - 1)) {\r
- CpuPause ();\r
- }\r
+ CpuMpData->CpuCount = CpuMpData->FinishedCount + 1;\r
+ ASSERT (CpuMpData->CpuCount <= PcdGet32 (PcdCpuMaxLogicalProcessorNumber));\r
\r
+ //\r
+ // Enable x2APIC mode if\r
+ // 1. Number of CPU is greater than 255; or\r
+ // 2. There are any logical processors reporting an Initial APIC ID of 255 or greater.\r
+ //\r
+ X2Apic = FALSE;\r
if (CpuMpData->CpuCount > 255) {\r
//\r
// If there are more than 255 processor found, force to enable X2APIC\r
//\r
- CpuMpData->X2ApicEnable = TRUE;\r
+ X2Apic = TRUE;\r
+ } else {\r
+ CpuInfoInHob = (CPU_INFO_IN_HOB *)(UINTN)CpuMpData->CpuInfoInHob;\r
+ for (Index = 0; Index < CpuMpData->CpuCount; Index++) {\r
+ if (CpuInfoInHob[Index].InitialApicId >= 0xFF) {\r
+ X2Apic = TRUE;\r
+ break;\r
+ }\r
+ }\r
}\r
- if (CpuMpData->X2ApicEnable) {\r
+\r
+ if (X2Apic) {\r
DEBUG ((DEBUG_INFO, "Force x2APIC mode!\n"));\r
//\r
// Wakeup all APs to enable x2APIC mode\r
//\r
- WakeUpAP (CpuMpData, TRUE, 0, ApFuncEnableX2Apic, NULL);\r
+ WakeUpAP (CpuMpData, TRUE, 0, ApFuncEnableX2Apic, NULL, TRUE);\r
//\r
// Wait for all known APs finished\r
//\r
while (CpuMpData->FinishedCount < (CpuMpData->CpuCount - 1)) {\r
CpuPause ();\r
}\r
+\r
//\r
// Enable x2APIC on BSP\r
//\r
SetApState (&CpuMpData->CpuData[Index], CpuStateIdle);\r
}\r
}\r
+\r
DEBUG ((DEBUG_INFO, "APIC MODE is %d\n", GetApicMode ()));\r
//\r
// Sort BSP/Aps by CPU APIC ID in ascending order\r
**/\r
VOID\r
InitializeApData (\r
- IN OUT CPU_MP_DATA *CpuMpData,\r
- IN UINTN ProcessorNumber,\r
- IN UINT32 BistData,\r
- IN UINT64 ApTopOfStack\r
+ IN OUT CPU_MP_DATA *CpuMpData,\r
+ IN UINTN ProcessorNumber,\r
+ IN UINT32 BistData,\r
+ IN UINT64 ApTopOfStack\r
)\r
{\r
- CPU_INFO_IN_HOB *CpuInfoInHob;\r
+ CPU_INFO_IN_HOB *CpuInfoInHob;\r
+ MSR_IA32_PLATFORM_ID_REGISTER PlatformIdMsr;\r
+ AP_STACK_DATA *ApStackData;\r
\r
- CpuInfoInHob = (CPU_INFO_IN_HOB *) (UINTN) CpuMpData->CpuInfoInHob;\r
+ CpuInfoInHob = (CPU_INFO_IN_HOB *)(UINTN)CpuMpData->CpuInfoInHob;\r
CpuInfoInHob[ProcessorNumber].InitialApicId = GetInitialApicId ();\r
CpuInfoInHob[ProcessorNumber].ApicId = GetApicId ();\r
CpuInfoInHob[ProcessorNumber].Health = BistData;\r
CpuInfoInHob[ProcessorNumber].ApTopOfStack = ApTopOfStack;\r
\r
+ //\r
+ // AP_STACK_DATA is stored at the top of AP Stack\r
+ //\r
+ ApStackData = (AP_STACK_DATA *)((UINTN)ApTopOfStack - sizeof (AP_STACK_DATA));\r
+ ApStackData->MpData = CpuMpData;\r
+\r
CpuMpData->CpuData[ProcessorNumber].Waiting = FALSE;\r
CpuMpData->CpuData[ProcessorNumber].CpuHealthy = (BistData == 0) ? TRUE : FALSE;\r
- if (CpuInfoInHob[ProcessorNumber].InitialApicId >= 0xFF) {\r
- //\r
- // Set x2APIC mode if there are any logical processor reporting\r
- // an Initial APIC ID of 255 or greater.\r
- //\r
- AcquireSpinLock(&CpuMpData->MpLock);\r
- CpuMpData->X2ApicEnable = TRUE;\r
- ReleaseSpinLock(&CpuMpData->MpLock);\r
+\r
+ //\r
+ // NOTE: PlatformId is not relevant on AMD platforms.\r
+ //\r
+ if (!StandardSignatureIsAuthenticAMD ()) {\r
+ PlatformIdMsr.Uint64 = AsmReadMsr64 (MSR_IA32_PLATFORM_ID);\r
+ CpuMpData->CpuData[ProcessorNumber].PlatformId = (UINT8)PlatformIdMsr.Bits.PlatformId;\r
}\r
\r
- InitializeSpinLock(&CpuMpData->CpuData[ProcessorNumber].ApLock);\r
+ AsmCpuid (\r
+ CPUID_VERSION_INFO,\r
+ &CpuMpData->CpuData[ProcessorNumber].ProcessorSignature,\r
+ NULL,\r
+ NULL,\r
+ NULL\r
+ );\r
+\r
+ InitializeSpinLock (&CpuMpData->CpuData[ProcessorNumber].ApLock);\r
SetApState (&CpuMpData->CpuData[ProcessorNumber], CpuStateIdle);\r
}\r
\r
This function will be called from AP reset code if BSP uses WakeUpAP.\r
\r
@param[in] ExchangeInfo Pointer to the MP exchange info buffer\r
- @param[in] NumApsExecuting Number of current executing AP\r
+ @param[in] ApIndex Number of current executing AP\r
**/\r
VOID\r
EFIAPI\r
ApWakeupFunction (\r
- IN MP_CPU_EXCHANGE_INFO *ExchangeInfo,\r
- IN UINTN NumApsExecuting\r
+ IN MP_CPU_EXCHANGE_INFO *ExchangeInfo,\r
+ IN UINTN ApIndex\r
)\r
{\r
- CPU_MP_DATA *CpuMpData;\r
- UINTN ProcessorNumber;\r
- EFI_AP_PROCEDURE Procedure;\r
- VOID *Parameter;\r
- UINT32 BistData;\r
- volatile UINT32 *ApStartupSignalBuffer;\r
- CPU_INFO_IN_HOB *CpuInfoInHob;\r
- UINT64 ApTopOfStack;\r
- UINTN CurrentApicMode;\r
+ CPU_MP_DATA *CpuMpData;\r
+ UINTN ProcessorNumber;\r
+ EFI_AP_PROCEDURE Procedure;\r
+ VOID *Parameter;\r
+ UINT32 BistData;\r
+ volatile UINT32 *ApStartupSignalBuffer;\r
+ CPU_INFO_IN_HOB *CpuInfoInHob;\r
+ UINT64 ApTopOfStack;\r
+ UINTN CurrentApicMode;\r
+ AP_STACK_DATA *ApStackData;\r
\r
//\r
// AP finished assembly code and begin to execute C code\r
// We need to re-initialize them at here\r
//\r
ProgramVirtualWireMode ();\r
+ //\r
+ // Mask the LINT0 and LINT1 so that AP doesn't enter the system timer interrupt handler.\r
+ //\r
+ DisableLvtInterrupts ();\r
SyncLocalApicTimerSetting (CpuMpData);\r
\r
CurrentApicMode = GetApicMode ();\r
while (TRUE) {\r
if (CpuMpData->InitFlag == ApInitConfig) {\r
- //\r
- // Add CPU number\r
- //\r
- InterlockedIncrement ((UINT32 *) &CpuMpData->CpuCount);\r
- ProcessorNumber = NumApsExecuting;\r
+ ProcessorNumber = ApIndex;\r
//\r
// This is first time AP wakeup, get BIST information from AP stack\r
//\r
- ApTopOfStack = CpuMpData->Buffer + (ProcessorNumber + 1) * CpuMpData->CpuApStackSize;\r
- BistData = *(UINT32 *) ((UINTN) ApTopOfStack - sizeof (UINTN));\r
- //\r
- // Do some AP initialize sync\r
- //\r
- ApInitializeSync (CpuMpData);\r
+ ApTopOfStack = CpuMpData->Buffer + (ProcessorNumber + 1) * CpuMpData->CpuApStackSize;\r
+ ApStackData = (AP_STACK_DATA *)((UINTN)ApTopOfStack - sizeof (AP_STACK_DATA));\r
+ BistData = (UINT32)ApStackData->Bist;\r
+\r
//\r
- // Sync BSP's Control registers to APs\r
+ // CpuMpData->CpuData[0].VolatileRegisters is initialized based on BSP environment,\r
+ // to initialize AP in InitConfig path.\r
+ // NOTE: IDTR.BASE stored in CpuMpData->CpuData[0].VolatileRegisters points to a different IDT shared by all APs.\r
//\r
RestoreVolatileRegisters (&CpuMpData->CpuData[0].VolatileRegisters, FALSE);\r
InitializeApData (CpuMpData, ProcessorNumber, BistData, ApTopOfStack);\r
//\r
ApStartupSignalBuffer = CpuMpData->CpuData[ProcessorNumber].StartupApSignal;\r
InterlockedCompareExchange32 (\r
- (UINT32 *) ApStartupSignalBuffer,\r
+ (UINT32 *)ApStartupSignalBuffer,\r
WAKEUP_AP_SIGNAL,\r
0\r
);\r
- if (CpuMpData->ApLoopMode == ApInHltLoop) {\r
+\r
+ if (CpuMpData->InitFlag == ApInitReconfig) {\r
//\r
- // Restore AP's volatile registers saved\r
+ // ApInitReconfig happens when:\r
+ // 1. AP is re-enabled after it's disabled, in either PEI or DXE phase.\r
+ // 2. AP is initialized in DXE phase.\r
+ // In either case, use the volatile registers value derived from BSP.\r
+ // NOTE: IDTR.BASE stored in CpuMpData->CpuData[0].VolatileRegisters points to a\r
+ // different IDT shared by all APs.\r
//\r
- RestoreVolatileRegisters (&CpuMpData->CpuData[ProcessorNumber].VolatileRegisters, TRUE);\r
+ RestoreVolatileRegisters (&CpuMpData->CpuData[0].VolatileRegisters, FALSE);\r
+ } else {\r
+ if (CpuMpData->ApLoopMode == ApInHltLoop) {\r
+ //\r
+ // Restore AP's volatile registers saved before AP is halted\r
+ //\r
+ RestoreVolatileRegisters (&CpuMpData->CpuData[ProcessorNumber].VolatileRegisters, TRUE);\r
+ } else {\r
+ //\r
+ // The CPU driver might not flush TLB for APs on spot after updating\r
+ // page attributes. AP in mwait loop mode needs to take care of it when\r
+ // woken up.\r
+ //\r
+ CpuFlushTlb ();\r
+ }\r
}\r
\r
if (GetApState (&CpuMpData->CpuData[ProcessorNumber]) == CpuStateReady) {\r
Procedure = (EFI_AP_PROCEDURE)CpuMpData->CpuData[ProcessorNumber].ApFunction;\r
- Parameter = (VOID *) CpuMpData->CpuData[ProcessorNumber].ApFunctionArgument;\r
+ Parameter = (VOID *)CpuMpData->CpuData[ProcessorNumber].ApFunctionArgument;\r
if (Procedure != NULL) {\r
SetApState (&CpuMpData->CpuData[ProcessorNumber], CpuStateBusy);\r
//\r
// Enable source debugging on AP function\r
- // \r
+ //\r
EnableDebugAgent ();\r
//\r
// Invoke AP function here\r
//\r
Procedure (Parameter);\r
- CpuInfoInHob = (CPU_INFO_IN_HOB *) (UINTN) CpuMpData->CpuInfoInHob;\r
+ CpuInfoInHob = (CPU_INFO_IN_HOB *)(UINTN)CpuMpData->CpuInfoInHob;\r
if (CpuMpData->SwitchBspFlag) {\r
//\r
// Re-get the processor number due to BSP/AP maybe exchange in AP function\r
//\r
GetProcessorNumber (CpuMpData, &ProcessorNumber);\r
- CpuMpData->CpuData[ProcessorNumber].ApFunction = 0;\r
+ CpuMpData->CpuData[ProcessorNumber].ApFunction = 0;\r
CpuMpData->CpuData[ProcessorNumber].ApFunctionArgument = 0;\r
- ApStartupSignalBuffer = CpuMpData->CpuData[ProcessorNumber].StartupApSignal;\r
- CpuInfoInHob[ProcessorNumber].ApTopOfStack = CpuInfoInHob[CpuMpData->NewBspNumber].ApTopOfStack;\r
+ ApStartupSignalBuffer = CpuMpData->CpuData[ProcessorNumber].StartupApSignal;\r
+ CpuInfoInHob[ProcessorNumber].ApTopOfStack = CpuInfoInHob[CpuMpData->NewBspNumber].ApTopOfStack;\r
} else {\r
- if (CpuInfoInHob[ProcessorNumber].ApicId != GetApicId () ||\r
- CpuInfoInHob[ProcessorNumber].InitialApicId != GetInitialApicId ()) {\r
+ if ((CpuInfoInHob[ProcessorNumber].ApicId != GetApicId ()) ||\r
+ (CpuInfoInHob[ProcessorNumber].InitialApicId != GetInitialApicId ()))\r
+ {\r
if (CurrentApicMode != GetApicMode ()) {\r
//\r
// If APIC mode change happened during AP function execution,\r
}\r
}\r
}\r
+\r
SetApState (&CpuMpData->CpuData[ProcessorNumber], CpuStateFinished);\r
}\r
}\r
\r
+ if (CpuMpData->ApLoopMode == ApInHltLoop) {\r
+ //\r
+ // Save AP volatile registers\r
+ //\r
+ SaveVolatileRegisters (&CpuMpData->CpuData[ProcessorNumber].VolatileRegisters);\r
+ }\r
+\r
//\r
// AP finished executing C code\r
//\r
- InterlockedIncrement ((UINT32 *) &CpuMpData->FinishedCount);\r
+ InterlockedIncrement ((UINT32 *)&CpuMpData->FinishedCount);\r
+\r
+ if (CpuMpData->InitFlag == ApInitConfig) {\r
+ //\r
+ // Delay decrementing the APs executing count when SEV-ES is enabled\r
+ // to allow the APs to issue an AP_RESET_HOLD before the BSP possibly\r
+ // performs another INIT-SIPI-SIPI sequence.\r
+ //\r
+ if (!CpuMpData->UseSevEsAPMethod) {\r
+ InterlockedDecrement ((UINT32 *)&CpuMpData->MpCpuExchangeInfo->NumApsExecuting);\r
+ }\r
+ }\r
\r
//\r
// Place AP is specified loop mode\r
//\r
if (CpuMpData->ApLoopMode == ApInHltLoop) {\r
- //\r
- // Save AP volatile registers\r
- //\r
- SaveVolatileRegisters (&CpuMpData->CpuData[ProcessorNumber].VolatileRegisters);\r
//\r
// Place AP in HLT-loop\r
//\r
while (TRUE) {\r
DisableInterrupts ();\r
- CpuSleep ();\r
+ if (CpuMpData->UseSevEsAPMethod) {\r
+ SevEsPlaceApHlt (CpuMpData);\r
+ } else {\r
+ CpuSleep ();\r
+ }\r
+\r
CpuPause ();\r
}\r
}\r
+\r
while (TRUE) {\r
DisableInterrupts ();\r
if (CpuMpData->ApLoopMode == ApInMwaitLoop) {\r
//\r
// Place AP in MWAIT-loop\r
//\r
- AsmMonitor ((UINTN) ApStartupSignalBuffer, 0, 0);\r
+ AsmMonitor ((UINTN)ApStartupSignalBuffer, 0, 0);\r
if (*ApStartupSignalBuffer != WAKEUP_AP_SIGNAL) {\r
//\r
// Check AP start-up signal again.\r
**/\r
VOID\r
WaitApWakeup (\r
- IN volatile UINT32 *ApStartupSignalBuffer\r
+ IN volatile UINT32 *ApStartupSignalBuffer\r
)\r
{\r
//\r
// Otherwise, write StartupApSignal again till AP waken up.\r
//\r
while (InterlockedCompareExchange32 (\r
- (UINT32 *) ApStartupSignalBuffer,\r
- WAKEUP_AP_SIGNAL,\r
- WAKEUP_AP_SIGNAL\r
- ) != 0) {\r
+ (UINT32 *)ApStartupSignalBuffer,\r
+ WAKEUP_AP_SIGNAL,\r
+ WAKEUP_AP_SIGNAL\r
+ ) != 0)\r
+ {\r
CpuPause ();\r
}\r
}\r
\r
+/**\r
+ Calculate the size of the reset vector.\r
+\r
+ @param[in] AddressMap The pointer to Address Map structure.\r
+ @param[out] SizeBelow1Mb Return the size of below 1MB memory for AP reset area.\r
+ @param[out] SizeAbove1Mb Return the size of abvoe 1MB memory for AP reset area.\r
+**/\r
+STATIC\r
+VOID\r
+GetApResetVectorSize (\r
+ IN MP_ASSEMBLY_ADDRESS_MAP *AddressMap,\r
+ OUT UINTN *SizeBelow1Mb OPTIONAL,\r
+ OUT UINTN *SizeAbove1Mb OPTIONAL\r
+ )\r
+{\r
+ if (SizeBelow1Mb != NULL) {\r
+ *SizeBelow1Mb = AddressMap->ModeTransitionOffset + sizeof (MP_CPU_EXCHANGE_INFO);\r
+ }\r
+\r
+ if (SizeAbove1Mb != NULL) {\r
+ *SizeAbove1Mb = AddressMap->RendezvousFunnelSize - AddressMap->ModeTransitionOffset;\r
+ }\r
+}\r
+\r
/**\r
This function will fill the exchange info structure.\r
\r
**/\r
VOID\r
FillExchangeInfoData (\r
- IN CPU_MP_DATA *CpuMpData\r
+ IN CPU_MP_DATA *CpuMpData\r
)\r
{\r
- volatile MP_CPU_EXCHANGE_INFO *ExchangeInfo;\r
+ volatile MP_CPU_EXCHANGE_INFO *ExchangeInfo;\r
+ UINTN Size;\r
+ IA32_SEGMENT_DESCRIPTOR *Selector;\r
+ IA32_CR4 Cr4;\r
\r
- ExchangeInfo = CpuMpData->MpCpuExchangeInfo;\r
- ExchangeInfo->Lock = 0;\r
- ExchangeInfo->StackStart = CpuMpData->Buffer;\r
- ExchangeInfo->StackSize = CpuMpData->CpuApStackSize;\r
- ExchangeInfo->BufferStart = CpuMpData->WakeupBuffer;\r
- ExchangeInfo->ModeOffset = CpuMpData->AddressMap.ModeEntryOffset;\r
+ ExchangeInfo = CpuMpData->MpCpuExchangeInfo;\r
+ ExchangeInfo->StackStart = CpuMpData->Buffer;\r
+ ExchangeInfo->StackSize = CpuMpData->CpuApStackSize;\r
+ ExchangeInfo->BufferStart = CpuMpData->WakeupBuffer;\r
+ ExchangeInfo->ModeOffset = CpuMpData->AddressMap.ModeEntryOffset;\r
\r
- ExchangeInfo->CodeSegment = AsmReadCs ();\r
- ExchangeInfo->DataSegment = AsmReadDs ();\r
+ ExchangeInfo->CodeSegment = AsmReadCs ();\r
+ ExchangeInfo->DataSegment = AsmReadDs ();\r
\r
- ExchangeInfo->Cr3 = AsmReadCr3 ();\r
+ ExchangeInfo->Cr3 = AsmReadCr3 ();\r
\r
- ExchangeInfo->CFunction = (UINTN) ApWakeupFunction;\r
+ ExchangeInfo->CFunction = (UINTN)ApWakeupFunction;\r
+ ExchangeInfo->ApIndex = 0;\r
ExchangeInfo->NumApsExecuting = 0;\r
- ExchangeInfo->InitFlag = (UINTN) CpuMpData->InitFlag;\r
- ExchangeInfo->CpuInfo = (CPU_INFO_IN_HOB *) (UINTN) CpuMpData->CpuInfoInHob;\r
+ ExchangeInfo->InitFlag = (UINTN)CpuMpData->InitFlag;\r
+ ExchangeInfo->CpuInfo = (CPU_INFO_IN_HOB *)(UINTN)CpuMpData->CpuInfoInHob;\r
ExchangeInfo->CpuMpData = CpuMpData;\r
\r
ExchangeInfo->EnableExecuteDisable = IsBspExecuteDisableEnabled ();\r
\r
ExchangeInfo->InitializeFloatingPointUnitsAddress = (UINTN)InitializeFloatingPointUnits;\r
\r
+ //\r
+ // We can check either CPUID(7).ECX[bit16] or check CR4.LA57[bit12]\r
+ // to determin whether 5-Level Paging is enabled.\r
+ // CPUID(7).ECX[bit16] shows CPU's capability, CR4.LA57[bit12] shows\r
+ // current system setting.\r
+ // Using latter way is simpler because it also eliminates the needs to\r
+ // check whether platform wants to enable it.\r
+ //\r
+ Cr4.UintN = AsmReadCr4 ();\r
+ ExchangeInfo->Enable5LevelPaging = (BOOLEAN)(Cr4.Bits.LA57 == 1);\r
+ DEBUG ((DEBUG_INFO, "%a: 5-Level Paging = %d\n", gEfiCallerBaseName, ExchangeInfo->Enable5LevelPaging));\r
+\r
+ ExchangeInfo->SevEsIsEnabled = CpuMpData->SevEsIsEnabled;\r
+ ExchangeInfo->SevSnpIsEnabled = CpuMpData->SevSnpIsEnabled;\r
+ ExchangeInfo->GhcbBase = (UINTN)CpuMpData->GhcbBase;\r
+\r
+ //\r
+ // Populate SEV-ES specific exchange data.\r
+ //\r
+ if (ExchangeInfo->SevSnpIsEnabled) {\r
+ FillExchangeInfoDataSevEs (ExchangeInfo);\r
+ }\r
+\r
//\r
// Get the BSP's data of GDT and IDT\r
//\r
- AsmReadGdtr ((IA32_DESCRIPTOR *) &ExchangeInfo->GdtrProfile);\r
- AsmReadIdtr ((IA32_DESCRIPTOR *) &ExchangeInfo->IdtrProfile);\r
+ AsmReadGdtr ((IA32_DESCRIPTOR *)&ExchangeInfo->GdtrProfile);\r
+ AsmReadIdtr ((IA32_DESCRIPTOR *)&ExchangeInfo->IdtrProfile);\r
+\r
+ //\r
+ // Find a 32-bit code segment\r
+ //\r
+ Selector = (IA32_SEGMENT_DESCRIPTOR *)ExchangeInfo->GdtrProfile.Base;\r
+ Size = ExchangeInfo->GdtrProfile.Limit + 1;\r
+ while (Size > 0) {\r
+ if ((Selector->Bits.L == 0) && (Selector->Bits.Type >= 8)) {\r
+ ExchangeInfo->ModeTransitionSegment =\r
+ (UINT16)((UINTN)Selector - ExchangeInfo->GdtrProfile.Base);\r
+ break;\r
+ }\r
+\r
+ Selector += 1;\r
+ Size -= sizeof (IA32_SEGMENT_DESCRIPTOR);\r
+ }\r
+\r
+ ExchangeInfo->ModeTransitionMemory = (UINT32)CpuMpData->WakeupBufferHigh;\r
+\r
+ ExchangeInfo->ModeHighMemory = ExchangeInfo->ModeTransitionMemory +\r
+ (UINT32)ExchangeInfo->ModeOffset -\r
+ (UINT32)CpuMpData->AddressMap.ModeTransitionOffset;\r
+ ExchangeInfo->ModeHighSegment = (UINT16)ExchangeInfo->CodeSegment;\r
}\r
\r
/**\r
**/\r
VOID\r
TimedWaitForApFinish (\r
- IN CPU_MP_DATA *CpuMpData,\r
- IN UINT32 FinishedApLimit,\r
- IN UINT32 TimeLimit\r
+ IN CPU_MP_DATA *CpuMpData,\r
+ IN UINT32 FinishedApLimit,\r
+ IN UINT32 TimeLimit\r
);\r
\r
+/**\r
+ Get available system memory below 1MB by specified size.\r
+\r
+ @param[in] CpuMpData The pointer to CPU MP Data structure.\r
+**/\r
+VOID\r
+BackupAndPrepareWakeupBuffer (\r
+ IN CPU_MP_DATA *CpuMpData\r
+ )\r
+{\r
+ CopyMem (\r
+ (VOID *)CpuMpData->BackupBuffer,\r
+ (VOID *)CpuMpData->WakeupBuffer,\r
+ CpuMpData->BackupBufferSize\r
+ );\r
+ CopyMem (\r
+ (VOID *)CpuMpData->WakeupBuffer,\r
+ (VOID *)CpuMpData->AddressMap.RendezvousFunnelAddress,\r
+ CpuMpData->BackupBufferSize - sizeof (MP_CPU_EXCHANGE_INFO)\r
+ );\r
+}\r
+\r
+/**\r
+ Restore wakeup buffer data.\r
+\r
+ @param[in] CpuMpData The pointer to CPU MP Data structure.\r
+**/\r
+VOID\r
+RestoreWakeupBuffer (\r
+ IN CPU_MP_DATA *CpuMpData\r
+ )\r
+{\r
+ CopyMem (\r
+ (VOID *)CpuMpData->WakeupBuffer,\r
+ (VOID *)CpuMpData->BackupBuffer,\r
+ CpuMpData->BackupBufferSize\r
+ );\r
+}\r
+\r
+/**\r
+ Allocate reset vector buffer.\r
+\r
+ @param[in, out] CpuMpData The pointer to CPU MP Data structure.\r
+**/\r
+VOID\r
+AllocateResetVectorBelow1Mb (\r
+ IN OUT CPU_MP_DATA *CpuMpData\r
+ )\r
+{\r
+ UINTN ApResetStackSize;\r
+\r
+ if (CpuMpData->WakeupBuffer == (UINTN)-1) {\r
+ CpuMpData->WakeupBuffer = GetWakeupBuffer (CpuMpData->BackupBufferSize);\r
+ CpuMpData->MpCpuExchangeInfo = (MP_CPU_EXCHANGE_INFO *)(UINTN)\r
+ (CpuMpData->WakeupBuffer + CpuMpData->BackupBufferSize - sizeof (MP_CPU_EXCHANGE_INFO));\r
+ DEBUG ((\r
+ DEBUG_INFO,\r
+ "AP Vector: 16-bit = %p/%x, ExchangeInfo = %p/%x\n",\r
+ CpuMpData->WakeupBuffer,\r
+ CpuMpData->BackupBufferSize - sizeof (MP_CPU_EXCHANGE_INFO),\r
+ CpuMpData->MpCpuExchangeInfo,\r
+ sizeof (MP_CPU_EXCHANGE_INFO)\r
+ ));\r
+ //\r
+ // The AP reset stack is only used by SEV-ES guests. Do not allocate it\r
+ // if SEV-ES is not enabled. An SEV-SNP guest is also considered\r
+ // an SEV-ES guest, but uses a different method of AP startup, eliminating\r
+ // the need for the allocation.\r
+ //\r
+ if (ConfidentialComputingGuestHas (CCAttrAmdSevEs) &&\r
+ !ConfidentialComputingGuestHas (CCAttrAmdSevSnp))\r
+ {\r
+ //\r
+ // Stack location is based on ProcessorNumber, so use the total number\r
+ // of processors for calculating the total stack area.\r
+ //\r
+ ApResetStackSize = (AP_RESET_STACK_SIZE *\r
+ PcdGet32 (PcdCpuMaxLogicalProcessorNumber));\r
+\r
+ //\r
+ // Invoke GetWakeupBuffer a second time to allocate the stack area\r
+ // below 1MB. The returned buffer will be page aligned and sized and\r
+ // below the previously allocated buffer.\r
+ //\r
+ CpuMpData->SevEsAPResetStackStart = GetWakeupBuffer (ApResetStackSize);\r
+\r
+ //\r
+ // Check to be sure that the "allocate below" behavior hasn't changed.\r
+ // This will also catch a failed allocation, as "-1" is returned on\r
+ // failure.\r
+ //\r
+ if (CpuMpData->SevEsAPResetStackStart >= CpuMpData->WakeupBuffer) {\r
+ DEBUG ((\r
+ DEBUG_ERROR,\r
+ "SEV-ES AP reset stack is not below wakeup buffer\n"\r
+ ));\r
+\r
+ ASSERT (FALSE);\r
+ CpuDeadLoop ();\r
+ }\r
+ }\r
+ }\r
+\r
+ BackupAndPrepareWakeupBuffer (CpuMpData);\r
+}\r
+\r
+/**\r
+ Free AP reset vector buffer.\r
+\r
+ @param[in] CpuMpData The pointer to CPU MP Data structure.\r
+**/\r
+VOID\r
+FreeResetVector (\r
+ IN CPU_MP_DATA *CpuMpData\r
+ )\r
+{\r
+ //\r
+ // If SEV-ES is enabled, the reset area is needed for AP parking and\r
+ // and AP startup in the OS, so the reset area is reserved. Do not\r
+ // perform the restore as this will overwrite memory which has data\r
+ // needed by SEV-ES.\r
+ //\r
+ if (!CpuMpData->UseSevEsAPMethod) {\r
+ RestoreWakeupBuffer (CpuMpData);\r
+ }\r
+}\r
+\r
/**\r
This function will be called by BSP to wakeup AP.\r
\r
@param[in] ProcessorNumber The handle number of specified processor\r
@param[in] Procedure The function to be invoked by AP\r
@param[in] ProcedureArgument The argument to be passed into AP function\r
+ @param[in] WakeUpDisabledAps Whether need to wake up disabled APs in broadcast mode.\r
**/\r
VOID\r
WakeUpAP (\r
- IN CPU_MP_DATA *CpuMpData,\r
- IN BOOLEAN Broadcast,\r
- IN UINTN ProcessorNumber,\r
- IN EFI_AP_PROCEDURE Procedure, OPTIONAL\r
- IN VOID *ProcedureArgument OPTIONAL\r
+ IN CPU_MP_DATA *CpuMpData,\r
+ IN BOOLEAN Broadcast,\r
+ IN UINTN ProcessorNumber,\r
+ IN EFI_AP_PROCEDURE Procedure OPTIONAL,\r
+ IN VOID *ProcedureArgument OPTIONAL,\r
+ IN BOOLEAN WakeUpDisabledAps\r
)\r
{\r
- volatile MP_CPU_EXCHANGE_INFO *ExchangeInfo;\r
- UINTN Index;\r
- CPU_AP_DATA *CpuData;\r
- BOOLEAN ResetVectorRequired;\r
- CPU_INFO_IN_HOB *CpuInfoInHob;\r
+ volatile MP_CPU_EXCHANGE_INFO *ExchangeInfo;\r
+ UINTN Index;\r
+ CPU_AP_DATA *CpuData;\r
+ BOOLEAN ResetVectorRequired;\r
+ CPU_INFO_IN_HOB *CpuInfoInHob;\r
\r
CpuMpData->FinishedCount = 0;\r
- ResetVectorRequired = FALSE;\r
+ ResetVectorRequired = FALSE;\r
\r
- if (CpuMpData->ApLoopMode == ApInHltLoop ||\r
- CpuMpData->InitFlag != ApInitDone) {\r
+ if (CpuMpData->WakeUpByInitSipiSipi ||\r
+ (CpuMpData->InitFlag != ApInitDone))\r
+ {\r
ResetVectorRequired = TRUE;\r
- AllocateResetVector (CpuMpData);\r
+ AllocateResetVectorBelow1Mb (CpuMpData);\r
+ AllocateSevEsAPMemory (CpuMpData);\r
FillExchangeInfoData (CpuMpData);\r
SaveLocalApicTimerSetting (CpuMpData);\r
- } else if (CpuMpData->ApLoopMode == ApInMwaitLoop) {\r
+ }\r
+\r
+ if (CpuMpData->ApLoopMode == ApInMwaitLoop) {\r
//\r
// Get AP target C-state each time when waking up AP,\r
// for it maybe updated by platform again\r
for (Index = 0; Index < CpuMpData->CpuCount; Index++) {\r
if (Index != CpuMpData->BspNumber) {\r
CpuData = &CpuMpData->CpuData[Index];\r
- CpuData->ApFunction = (UINTN) Procedure;\r
- CpuData->ApFunctionArgument = (UINTN) ProcedureArgument;\r
+ //\r
+ // All AP(include disabled AP) will be woke up by INIT-SIPI-SIPI, but\r
+ // the AP procedure will be skipped for disabled AP because AP state\r
+ // is not CpuStateReady.\r
+ //\r
+ if ((GetApState (CpuData) == CpuStateDisabled) && !WakeUpDisabledAps) {\r
+ continue;\r
+ }\r
+\r
+ CpuData->ApFunction = (UINTN)Procedure;\r
+ CpuData->ApFunctionArgument = (UINTN)ProcedureArgument;\r
SetApState (CpuData, CpuStateReady);\r
if (CpuMpData->InitFlag != ApInitConfig) {\r
- *(UINT32 *) CpuData->StartupApSignal = WAKEUP_AP_SIGNAL;\r
+ *(UINT32 *)CpuData->StartupApSignal = WAKEUP_AP_SIGNAL;\r
}\r
}\r
}\r
+\r
if (ResetVectorRequired) {\r
+ //\r
+ // For SEV-ES and SEV-SNP, the initial AP boot address will be defined by\r
+ // PcdSevEsWorkAreaBase. The Segment/Rip must be the jump address\r
+ // from the original INIT-SIPI-SIPI.\r
+ //\r
+ if (CpuMpData->SevEsIsEnabled) {\r
+ SetSevEsJumpTable (ExchangeInfo->BufferStart);\r
+ }\r
+\r
//\r
// Wakeup all APs\r
+ // Must use the INIT-SIPI-SIPI method for initial configuration in\r
+ // order to obtain the APIC ID.\r
//\r
- SendInitSipiSipiAllExcludingSelf ((UINT32) ExchangeInfo->BufferStart);\r
+ if (CpuMpData->SevSnpIsEnabled && (CpuMpData->InitFlag != ApInitConfig)) {\r
+ SevSnpCreateAP (CpuMpData, -1);\r
+ } else {\r
+ SendInitSipiSipiAllExcludingSelf ((UINT32)ExchangeInfo->BufferStart);\r
+ }\r
}\r
+\r
if (CpuMpData->InitFlag == ApInitConfig) {\r
- //\r
- // Wait for all potential APs waken up in one specified period\r
- //\r
- TimedWaitForApFinish (\r
- CpuMpData,\r
- PcdGet32 (PcdCpuMaxLogicalProcessorNumber) - 1,\r
- PcdGet32 (PcdCpuApInitTimeOutInMicroSeconds)\r
- );\r
+ if (PcdGet32 (PcdCpuBootLogicalProcessorNumber) > 0) {\r
+ //\r
+ // The AP enumeration algorithm below is suitable only when the\r
+ // platform can tell us the *exact* boot CPU count in advance.\r
+ //\r
+ // The wait below finishes only when the detected AP count reaches\r
+ // (PcdCpuBootLogicalProcessorNumber - 1), regardless of how long that\r
+ // takes. If at least one AP fails to check in (meaning a platform\r
+ // hardware bug), the detection hangs forever, by design. If the actual\r
+ // boot CPU count in the system is higher than\r
+ // PcdCpuBootLogicalProcessorNumber (meaning a platform\r
+ // misconfiguration), then some APs may complete initialization after\r
+ // the wait finishes, and cause undefined behavior.\r
+ //\r
+ TimedWaitForApFinish (\r
+ CpuMpData,\r
+ PcdGet32 (PcdCpuBootLogicalProcessorNumber) - 1,\r
+ MAX_UINT32 // approx. 71 minutes\r
+ );\r
+ } else {\r
+ //\r
+ // The AP enumeration algorithm below is suitable for two use cases.\r
+ //\r
+ // (1) The check-in time for an individual AP is bounded, and APs run\r
+ // through their initialization routines strongly concurrently. In\r
+ // particular, the number of concurrently running APs\r
+ // ("NumApsExecuting") is never expected to fall to zero\r
+ // *temporarily* -- it is expected to fall to zero only when all\r
+ // APs have checked-in.\r
+ //\r
+ // In this case, the platform is supposed to set\r
+ // PcdCpuApInitTimeOutInMicroSeconds to a low-ish value (just long\r
+ // enough for one AP to start initialization). The timeout will be\r
+ // reached soon, and remaining APs are collected by watching\r
+ // NumApsExecuting fall to zero. If NumApsExecuting falls to zero\r
+ // mid-process, while some APs have not completed initialization,\r
+ // the behavior is undefined.\r
+ //\r
+ // (2) The check-in time for an individual AP is unbounded, and/or APs\r
+ // may complete their initializations widely spread out. In\r
+ // particular, some APs may finish initialization before some APs\r
+ // even start.\r
+ //\r
+ // In this case, the platform is supposed to set\r
+ // PcdCpuApInitTimeOutInMicroSeconds to a high-ish value. The AP\r
+ // enumeration will always take that long (except when the boot CPU\r
+ // count happens to be maximal, that is,\r
+ // PcdCpuMaxLogicalProcessorNumber). All APs are expected to\r
+ // check-in before the timeout, and NumApsExecuting is assumed zero\r
+ // at timeout. APs that miss the time-out may cause undefined\r
+ // behavior.\r
+ //\r
+ TimedWaitForApFinish (\r
+ CpuMpData,\r
+ PcdGet32 (PcdCpuMaxLogicalProcessorNumber) - 1,\r
+ PcdGet32 (PcdCpuApInitTimeOutInMicroSeconds)\r
+ );\r
+\r
+ while (CpuMpData->MpCpuExchangeInfo->NumApsExecuting != 0) {\r
+ CpuPause ();\r
+ }\r
+ }\r
} else {\r
//\r
// Wait all APs waken up if this is not the 1st broadcast of SIPI\r
}\r
}\r
} else {\r
- CpuData = &CpuMpData->CpuData[ProcessorNumber];\r
- CpuData->ApFunction = (UINTN) Procedure;\r
- CpuData->ApFunctionArgument = (UINTN) ProcedureArgument;\r
+ CpuData = &CpuMpData->CpuData[ProcessorNumber];\r
+ CpuData->ApFunction = (UINTN)Procedure;\r
+ CpuData->ApFunctionArgument = (UINTN)ProcedureArgument;\r
SetApState (CpuData, CpuStateReady);\r
//\r
// Wakeup specified AP\r
//\r
ASSERT (CpuMpData->InitFlag != ApInitConfig);\r
- *(UINT32 *) CpuData->StartupApSignal = WAKEUP_AP_SIGNAL;\r
+ *(UINT32 *)CpuData->StartupApSignal = WAKEUP_AP_SIGNAL;\r
if (ResetVectorRequired) {\r
- CpuInfoInHob = (CPU_INFO_IN_HOB *) (UINTN) CpuMpData->CpuInfoInHob;\r
- SendInitSipiSipi (\r
- CpuInfoInHob[ProcessorNumber].ApicId,\r
- (UINT32) ExchangeInfo->BufferStart\r
- );\r
+ CpuInfoInHob = (CPU_INFO_IN_HOB *)(UINTN)CpuMpData->CpuInfoInHob;\r
+\r
+ //\r
+ // For SEV-ES and SEV-SNP, the initial AP boot address will be defined by\r
+ // PcdSevEsWorkAreaBase. The Segment/Rip must be the jump address\r
+ // from the original INIT-SIPI-SIPI.\r
+ //\r
+ if (CpuMpData->SevEsIsEnabled) {\r
+ SetSevEsJumpTable (ExchangeInfo->BufferStart);\r
+ }\r
+\r
+ if (CpuMpData->SevSnpIsEnabled && (CpuMpData->InitFlag != ApInitConfig)) {\r
+ SevSnpCreateAP (CpuMpData, (INTN)ProcessorNumber);\r
+ } else {\r
+ SendInitSipiSipi (\r
+ CpuInfoInHob[ProcessorNumber].ApicId,\r
+ (UINT32)ExchangeInfo->BufferStart\r
+ );\r
+ }\r
}\r
+\r
//\r
// Wait specified AP waken up\r
//\r
if (ResetVectorRequired) {\r
FreeResetVector (CpuMpData);\r
}\r
+\r
+ //\r
+ // After one round of Wakeup Ap actions, need to re-sync ApLoopMode with\r
+ // WakeUpByInitSipiSipi flag. WakeUpByInitSipiSipi flag maybe changed by\r
+ // S3SmmInitDone Ppi.\r
+ //\r
+ CpuMpData->WakeUpByInitSipiSipi = (CpuMpData->ApLoopMode == ApInHltLoop);\r
}\r
\r
/**\r
OUT UINT64 *CurrentTime\r
)\r
{\r
+ UINT64 TimeoutInSeconds;\r
+ UINT64 TimestampCounterFreq;\r
+\r
//\r
// Read the current value of the performance counter\r
//\r
\r
//\r
// GetPerformanceCounterProperties () returns the timestamp counter's frequency\r
- // in Hz. So multiply the return value with TimeoutInMicroseconds and then divide\r
- // it by 1,000,000, to get the number of ticks for the timeout value.\r
- //\r
- return DivU64x32 (\r
- MultU64x64 (\r
- GetPerformanceCounterProperties (NULL, NULL),\r
- TimeoutInMicroseconds\r
- ),\r
- 1000000\r
- );\r
+ // in Hz.\r
+ //\r
+ TimestampCounterFreq = GetPerformanceCounterProperties (NULL, NULL);\r
+\r
+ //\r
+ // Check the potential overflow before calculate the number of ticks for the timeout value.\r
+ //\r
+ if (DivU64x64Remainder (MAX_UINT64, TimeoutInMicroseconds, NULL) < TimestampCounterFreq) {\r
+ //\r
+ // Convert microseconds into seconds if direct multiplication overflows\r
+ //\r
+ TimeoutInSeconds = DivU64x32 (TimeoutInMicroseconds, 1000000);\r
+ //\r
+ // Assertion if the final tick count exceeds MAX_UINT64\r
+ //\r
+ ASSERT (DivU64x64Remainder (MAX_UINT64, TimeoutInSeconds, NULL) >= TimestampCounterFreq);\r
+ return MultU64x64 (TimestampCounterFreq, TimeoutInSeconds);\r
+ } else {\r
+ //\r
+ // No overflow case, multiply the return value with TimeoutInMicroseconds and then divide\r
+ // it by 1,000,000, to get the number of ticks for the timeout value.\r
+ //\r
+ return DivU64x32 (\r
+ MultU64x64 (\r
+ TimestampCounterFreq,\r
+ TimeoutInMicroseconds\r
+ ),\r
+ 1000000\r
+ );\r
+ }\r
}\r
\r
/**\r
if (Timeout == 0) {\r
return FALSE;\r
}\r
+\r
GetPerformanceCounterProperties (&Start, &End);\r
Cycle = End - Start;\r
if (Cycle < 0) {\r
Cycle = -Cycle;\r
}\r
+\r
Cycle++;\r
- CurrentTime = GetPerformanceCounter();\r
- Delta = (INT64) (CurrentTime - *PreviousTime);\r
+ CurrentTime = GetPerformanceCounter ();\r
+ Delta = (INT64)(CurrentTime - *PreviousTime);\r
if (Start > End) {\r
Delta = -Delta;\r
}\r
+\r
if (Delta < 0) {\r
Delta += Cycle;\r
}\r
- *TotalTime += Delta;\r
+\r
+ *TotalTime += Delta;\r
*PreviousTime = CurrentTime;\r
if (*TotalTime > Timeout) {\r
return TRUE;\r
}\r
+\r
return FALSE;\r
}\r
\r
**/\r
VOID\r
TimedWaitForApFinish (\r
- IN CPU_MP_DATA *CpuMpData,\r
- IN UINT32 FinishedApLimit,\r
- IN UINT32 TimeLimit\r
+ IN CPU_MP_DATA *CpuMpData,\r
+ IN UINT32 FinishedApLimit,\r
+ IN UINT32 TimeLimit\r
)\r
{\r
//\r
return;\r
}\r
\r
- CpuMpData->TotalTime = 0;\r
+ CpuMpData->TotalTime = 0;\r
CpuMpData->ExpectedTime = CalculateTimeout (\r
TimeLimit,\r
&CpuMpData->CurrentTime\r
&CpuMpData->CurrentTime,\r
&CpuMpData->TotalTime,\r
CpuMpData->ExpectedTime\r
- )) {\r
+ ))\r
+ {\r
CpuPause ();\r
}\r
\r
**/\r
VOID\r
ResetProcessorToIdleState (\r
- IN UINTN ProcessorNumber\r
+ IN UINTN ProcessorNumber\r
)\r
{\r
- CPU_MP_DATA *CpuMpData;\r
+ CPU_MP_DATA *CpuMpData;\r
\r
CpuMpData = GetCpuMpData ();\r
\r
CpuMpData->InitFlag = ApInitReconfig;\r
- WakeUpAP (CpuMpData, FALSE, ProcessorNumber, NULL, NULL);\r
+ WakeUpAP (CpuMpData, FALSE, ProcessorNumber, NULL, NULL, TRUE);\r
while (CpuMpData->FinishedCount < 1) {\r
CpuPause ();\r
}\r
+\r
CpuMpData->InitFlag = ApInitDone;\r
\r
SetApState (&CpuMpData->CpuData[ProcessorNumber], CpuStateIdle);\r
**/\r
EFI_STATUS\r
GetNextWaitingProcessorNumber (\r
- OUT UINTN *NextProcessorNumber\r
+ OUT UINTN *NextProcessorNumber\r
)\r
{\r
- UINTN ProcessorNumber;\r
- CPU_MP_DATA *CpuMpData;\r
+ UINTN ProcessorNumber;\r
+ CPU_MP_DATA *CpuMpData;\r
\r
CpuMpData = GetCpuMpData ();\r
\r
**/\r
EFI_STATUS\r
CheckThisAP (\r
- IN UINTN ProcessorNumber\r
+ IN UINTN ProcessorNumber\r
)\r
{\r
- CPU_MP_DATA *CpuMpData;\r
- CPU_AP_DATA *CpuData;\r
+ CPU_MP_DATA *CpuMpData;\r
+ CPU_AP_DATA *CpuData;\r
\r
CpuMpData = GetCpuMpData ();\r
CpuData = &CpuMpData->CpuData[ProcessorNumber];\r
\r
//\r
- // Check the CPU state of AP. If it is CpuStateFinished, then the AP has finished its task.\r
+ // Check the CPU state of AP. If it is CpuStateIdle, then the AP has finished its task.\r
// Only BSP and corresponding AP access this unit of CPU Data. This means the AP will not modify the\r
- // value of state after setting the it to CpuStateFinished, so BSP can safely make use of its value.\r
+ // value of state after setting the it to CpuStateIdle, so BSP can safely make use of its value.\r
//\r
//\r
// If the AP finishes for StartupThisAP(), return EFI_SUCCESS.\r
//\r
- if (GetApState(CpuData) == CpuStateFinished) {\r
+ if (GetApState (CpuData) == CpuStateFinished) {\r
if (CpuData->Finished != NULL) {\r
*(CpuData->Finished) = TRUE;\r
}\r
+\r
SetApState (CpuData, CpuStateIdle);\r
return EFI_SUCCESS;\r
} else {\r
if (CpuData->Finished != NULL) {\r
*(CpuData->Finished) = FALSE;\r
}\r
+\r
//\r
// Reset failed AP to idle state\r
//\r
return EFI_TIMEOUT;\r
}\r
}\r
+\r
return EFI_NOT_READY;\r
}\r
\r
VOID\r
)\r
{\r
- UINTN ProcessorNumber;\r
- UINTN NextProcessorNumber;\r
- UINTN ListIndex;\r
- EFI_STATUS Status;\r
- CPU_MP_DATA *CpuMpData;\r
- CPU_AP_DATA *CpuData;\r
+ UINTN ProcessorNumber;\r
+ UINTN NextProcessorNumber;\r
+ UINTN ListIndex;\r
+ EFI_STATUS Status;\r
+ CPU_MP_DATA *CpuMpData;\r
+ CPU_AP_DATA *CpuData;\r
\r
CpuMpData = GetCpuMpData ();\r
\r
\r
CpuData = &CpuMpData->CpuData[ProcessorNumber];\r
//\r
- // Check the CPU state of AP. If it is CpuStateFinished, then the AP has finished its task.\r
+ // Check the CPU state of AP. If it is CpuStateIdle, then the AP has finished its task.\r
// Only BSP and corresponding AP access this unit of CPU Data. This means the AP will not modify the\r
- // value of state after setting the it to CpuStateFinished, so BSP can safely make use of its value.\r
+ // value of state after setting the it to CpuStateIdle, so BSP can safely make use of its value.\r
//\r
- if (GetApState(CpuData) == CpuStateFinished) {\r
- CpuMpData->RunningCount ++;\r
+ if (GetApState (CpuData) == CpuStateFinished) {\r
+ CpuMpData->RunningCount--;\r
CpuMpData->CpuData[ProcessorNumber].Waiting = FALSE;\r
- SetApState(CpuData, CpuStateIdle);\r
+ SetApState (CpuData, CpuStateIdle);\r
\r
//\r
// If in Single Thread mode, then search for the next waiting AP for execution.\r
WakeUpAP (\r
CpuMpData,\r
FALSE,\r
- (UINT32) NextProcessorNumber,\r
+ (UINT32)NextProcessorNumber,\r
CpuMpData->Procedure,\r
- CpuMpData->ProcArguments\r
+ CpuMpData->ProcArguments,\r
+ TRUE\r
);\r
- }\r
+ }\r
}\r
}\r
}\r
//\r
// If all APs finish, return EFI_SUCCESS.\r
//\r
- if (CpuMpData->RunningCount == CpuMpData->StartCount) {\r
+ if (CpuMpData->RunningCount == 0) {\r
return EFI_SUCCESS;\r
}\r
\r
// If timeout expires, report timeout.\r
//\r
if (CheckTimeout (\r
- &CpuMpData->CurrentTime,\r
- &CpuMpData->TotalTime,\r
- CpuMpData->ExpectedTime)\r
- ) {\r
+ &CpuMpData->CurrentTime,\r
+ &CpuMpData->TotalTime,\r
+ CpuMpData->ExpectedTime\r
+ )\r
+ )\r
+ {\r
//\r
// If FailedCpuList is not NULL, record all failed APs in it.\r
//\r
if (CpuMpData->FailedCpuList != NULL) {\r
*CpuMpData->FailedCpuList =\r
- AllocatePool ((CpuMpData->StartCount - CpuMpData->FinishedCount + 1) * sizeof (UINTN));\r
+ AllocatePool ((CpuMpData->RunningCount + 1) * sizeof (UINTN));\r
ASSERT (*CpuMpData->FailedCpuList != NULL);\r
}\r
+\r
ListIndex = 0;\r
\r
for (ProcessorNumber = 0; ProcessorNumber < CpuMpData->CpuCount; ProcessorNumber++) {\r
}\r
}\r
}\r
+\r
if (CpuMpData->FailedCpuList != NULL) {\r
(*CpuMpData->FailedCpuList)[ListIndex] = END_OF_CPU_LIST;\r
}\r
+\r
return EFI_TIMEOUT;\r
}\r
+\r
return EFI_NOT_READY;\r
}\r
\r
UINT32 MaxLogicalProcessorNumber;\r
UINT32 ApStackSize;\r
MP_ASSEMBLY_ADDRESS_MAP AddressMap;\r
+ CPU_VOLATILE_REGISTERS VolatileRegisters;\r
UINTN BufferSize;\r
UINT32 MonitorFilterSize;\r
VOID *MpBuffer;\r
UINT8 ApLoopMode;\r
UINT8 *MonitorBuffer;\r
UINTN Index;\r
- UINTN ApResetVectorSize;\r
+ UINTN ApResetVectorSizeBelow1Mb;\r
+ UINTN ApResetVectorSizeAbove1Mb;\r
UINTN BackupBufferAddr;\r
+ UINTN ApIdtBase;\r
\r
OldCpuMpData = GetCpuMpDataFromGuidedHob ();\r
if (OldCpuMpData == NULL) {\r
- MaxLogicalProcessorNumber = PcdGet32(PcdCpuMaxLogicalProcessorNumber);\r
+ MaxLogicalProcessorNumber = PcdGet32 (PcdCpuMaxLogicalProcessorNumber);\r
} else {\r
MaxLogicalProcessorNumber = OldCpuMpData->CpuCount;\r
}\r
+\r
ASSERT (MaxLogicalProcessorNumber != 0);\r
\r
AsmGetAddressMap (&AddressMap);\r
- ApResetVectorSize = AddressMap.RendezvousFunnelSize + sizeof (MP_CPU_EXCHANGE_INFO);\r
- ApStackSize = PcdGet32(PcdCpuApStackSize);\r
- ApLoopMode = GetApLoopMode (&MonitorFilterSize);\r
+ GetApResetVectorSize (&AddressMap, &ApResetVectorSizeBelow1Mb, &ApResetVectorSizeAbove1Mb);\r
+ ApStackSize = PcdGet32 (PcdCpuApStackSize);\r
+ //\r
+ // ApStackSize must be power of 2\r
+ //\r
+ ASSERT ((ApStackSize & (ApStackSize - 1)) == 0);\r
+ ApLoopMode = GetApLoopMode (&MonitorFilterSize);\r
+\r
+ //\r
+ // Save BSP's Control registers for APs.\r
+ //\r
+ SaveVolatileRegisters (&VolatileRegisters);\r
\r
- BufferSize = ApStackSize * MaxLogicalProcessorNumber;\r
+ BufferSize = ApStackSize * MaxLogicalProcessorNumber;\r
+ //\r
+ // Allocate extra ApStackSize to let AP stack align on ApStackSize bounday\r
+ //\r
+ BufferSize += ApStackSize;\r
BufferSize += MonitorFilterSize * MaxLogicalProcessorNumber;\r
+ BufferSize += ApResetVectorSizeBelow1Mb;\r
+ BufferSize = ALIGN_VALUE (BufferSize, 8);\r
+ BufferSize += VolatileRegisters.Idtr.Limit + 1;\r
BufferSize += sizeof (CPU_MP_DATA);\r
- BufferSize += ApResetVectorSize;\r
BufferSize += (sizeof (CPU_AP_DATA) + sizeof (CPU_INFO_IN_HOB))* MaxLogicalProcessorNumber;\r
MpBuffer = AllocatePages (EFI_SIZE_TO_PAGES (BufferSize));\r
ASSERT (MpBuffer != NULL);\r
ZeroMem (MpBuffer, BufferSize);\r
- Buffer = (UINTN) MpBuffer;\r
-\r
- MonitorBuffer = (UINT8 *) (Buffer + ApStackSize * MaxLogicalProcessorNumber);\r
- BackupBufferAddr = (UINTN) MonitorBuffer + MonitorFilterSize * MaxLogicalProcessorNumber;\r
- CpuMpData = (CPU_MP_DATA *) (BackupBufferAddr + ApResetVectorSize);\r
+ Buffer = ALIGN_VALUE ((UINTN)MpBuffer, ApStackSize);\r
+\r
+ //\r
+ // The layout of the Buffer is as below (lower address on top):\r
+ //\r
+ // +--------------------+ <-- Buffer (Pointer of CpuMpData is stored in the top of each AP's stack.)\r
+ // AP Stacks (N) (StackTop = (RSP + ApStackSize) & ~ApStackSize))\r
+ // +--------------------+ <-- MonitorBuffer\r
+ // AP Monitor Filters (N)\r
+ // +--------------------+ <-- BackupBufferAddr (CpuMpData->BackupBuffer)\r
+ // Backup Buffer\r
+ // +--------------------+\r
+ // Padding\r
+ // +--------------------+ <-- ApIdtBase (8-byte boundary)\r
+ // AP IDT All APs share one separate IDT.\r
+ // +--------------------+ <-- CpuMpData\r
+ // CPU_MP_DATA\r
+ // +--------------------+ <-- CpuMpData->CpuData\r
+ // CPU_AP_DATA (N)\r
+ // +--------------------+ <-- CpuMpData->CpuInfoInHob\r
+ // CPU_INFO_IN_HOB (N)\r
+ // +--------------------+\r
+ //\r
+ MonitorBuffer = (UINT8 *)(Buffer + ApStackSize * MaxLogicalProcessorNumber);\r
+ BackupBufferAddr = (UINTN)MonitorBuffer + MonitorFilterSize * MaxLogicalProcessorNumber;\r
+ ApIdtBase = ALIGN_VALUE (BackupBufferAddr + ApResetVectorSizeBelow1Mb, 8);\r
+ CpuMpData = (CPU_MP_DATA *)(ApIdtBase + VolatileRegisters.Idtr.Limit + 1);\r
CpuMpData->Buffer = Buffer;\r
CpuMpData->CpuApStackSize = ApStackSize;\r
CpuMpData->BackupBuffer = BackupBufferAddr;\r
- CpuMpData->BackupBufferSize = ApResetVectorSize;\r
- CpuMpData->SaveRestoreFlag = FALSE;\r
- CpuMpData->WakeupBuffer = (UINTN) -1;\r
+ CpuMpData->BackupBufferSize = ApResetVectorSizeBelow1Mb;\r
+ CpuMpData->WakeupBuffer = (UINTN)-1;\r
CpuMpData->CpuCount = 1;\r
CpuMpData->BspNumber = 0;\r
CpuMpData->WaitEvent = NULL;\r
CpuMpData->SwitchBspFlag = FALSE;\r
- CpuMpData->CpuData = (CPU_AP_DATA *) (CpuMpData + 1);\r
- CpuMpData->CpuInfoInHob = (UINT64) (UINTN) (CpuMpData->CpuData + MaxLogicalProcessorNumber);\r
- InitializeSpinLock(&CpuMpData->MpLock);\r
+ CpuMpData->CpuData = (CPU_AP_DATA *)(CpuMpData + 1);\r
+ CpuMpData->CpuInfoInHob = (UINT64)(UINTN)(CpuMpData->CpuData + MaxLogicalProcessorNumber);\r
+ InitializeSpinLock (&CpuMpData->MpLock);\r
+ CpuMpData->SevEsIsEnabled = ConfidentialComputingGuestHas (CCAttrAmdSevEs);\r
+ CpuMpData->SevSnpIsEnabled = ConfidentialComputingGuestHas (CCAttrAmdSevSnp);\r
+ CpuMpData->SevEsAPBuffer = (UINTN)-1;\r
+ CpuMpData->GhcbBase = PcdGet64 (PcdGhcbBase);\r
+ CpuMpData->UseSevEsAPMethod = CpuMpData->SevEsIsEnabled && !CpuMpData->SevSnpIsEnabled;\r
+\r
+ if (CpuMpData->SevSnpIsEnabled) {\r
+ ASSERT ((PcdGet64 (PcdGhcbHypervisorFeatures) & GHCB_HV_FEATURES_SNP_AP_CREATE) == GHCB_HV_FEATURES_SNP_AP_CREATE);\r
+ }\r
+\r
//\r
- // Save BSP's Control registers to APs\r
+ // Make sure no memory usage outside of the allocated buffer.\r
+ // (ApStackSize - (Buffer - (UINTN)MpBuffer)) is the redundant caused by alignment\r
//\r
- SaveVolatileRegisters (&CpuMpData->CpuData[0].VolatileRegisters);\r
+ ASSERT (\r
+ (CpuMpData->CpuInfoInHob + sizeof (CPU_INFO_IN_HOB) * MaxLogicalProcessorNumber) ==\r
+ (UINTN)MpBuffer + BufferSize - (ApStackSize - Buffer + (UINTN)MpBuffer)\r
+ );\r
+\r
+ //\r
+ // Duplicate BSP's IDT to APs.\r
+ // All APs share one separate IDT. So AP can get the address of CpuMpData by using IDTR.BASE + IDTR.LIMIT + 1\r
+ //\r
+ CopyMem ((VOID *)ApIdtBase, (VOID *)VolatileRegisters.Idtr.Base, VolatileRegisters.Idtr.Limit + 1);\r
+ VolatileRegisters.Idtr.Base = ApIdtBase;\r
+ //\r
+ // Don't pass BSP's TR to APs to avoid AP init failure.\r
+ //\r
+ VolatileRegisters.Tr = 0;\r
+ CopyMem (&CpuMpData->CpuData[0].VolatileRegisters, &VolatileRegisters, sizeof (VolatileRegisters));\r
//\r
// Set BSP basic information\r
//\r
- InitializeApData (CpuMpData, 0, 0, CpuMpData->Buffer);\r
+ InitializeApData (CpuMpData, 0, 0, CpuMpData->Buffer + ApStackSize);\r
//\r
// Save assembly code information\r
//\r
//\r
CpuMpData->ApLoopMode = ApLoopMode;\r
DEBUG ((DEBUG_INFO, "AP Loop Mode is %d\n", CpuMpData->ApLoopMode));\r
+\r
+ CpuMpData->WakeUpByInitSipiSipi = (CpuMpData->ApLoopMode == ApInHltLoop);\r
+\r
//\r
// Set up APs wakeup signal buffer\r
//\r
CpuMpData->CpuData[Index].StartupApSignal =\r
(UINT32 *)(MonitorBuffer + MonitorFilterSize * Index);\r
}\r
+\r
//\r
- // Load Microcode on BSP\r
- //\r
- MicrocodeDetect (CpuMpData);\r
+ // Copy all 32-bit code and 64-bit code into memory with type of\r
+ // EfiBootServicesCode to avoid page fault if NX memory protection is enabled.\r
//\r
- // Store BSP's MTRR setting\r
- //\r
- MtrrGetAllMtrrs (&CpuMpData->MtrrTable);\r
+ CpuMpData->WakeupBufferHigh = AllocateCodeBuffer (ApResetVectorSizeAbove1Mb);\r
+ CopyMem (\r
+ (VOID *)CpuMpData->WakeupBufferHigh,\r
+ CpuMpData->AddressMap.RendezvousFunnelAddress +\r
+ CpuMpData->AddressMap.ModeTransitionOffset,\r
+ ApResetVectorSizeAbove1Mb\r
+ );\r
+ DEBUG ((DEBUG_INFO, "AP Vector: non-16-bit = %p/%x\n", CpuMpData->WakeupBufferHigh, ApResetVectorSizeAbove1Mb));\r
+\r
//\r
// Enable the local APIC for Virtual Wire Mode.\r
//\r
// APs have been wakeup before, just get the CPU Information\r
// from HOB\r
//\r
- CpuMpData->CpuCount = OldCpuMpData->CpuCount;\r
- CpuMpData->BspNumber = OldCpuMpData->BspNumber;\r
- CpuMpData->InitFlag = ApInitReconfig;\r
- CpuMpData->CpuInfoInHob = OldCpuMpData->CpuInfoInHob;\r
- CpuInfoInHob = (CPU_INFO_IN_HOB *) (UINTN) CpuMpData->CpuInfoInHob;\r
+ OldCpuMpData->NewCpuMpData = CpuMpData;\r
+ CpuMpData->CpuCount = OldCpuMpData->CpuCount;\r
+ CpuMpData->BspNumber = OldCpuMpData->BspNumber;\r
+ CpuMpData->CpuInfoInHob = OldCpuMpData->CpuInfoInHob;\r
+ CpuInfoInHob = (CPU_INFO_IN_HOB *)(UINTN)CpuMpData->CpuInfoInHob;\r
for (Index = 0; Index < CpuMpData->CpuCount; Index++) {\r
- InitializeSpinLock(&CpuMpData->CpuData[Index].ApLock);\r
- if (CpuInfoInHob[Index].InitialApicId >= 255 || Index > 254) {\r
- CpuMpData->X2ApicEnable = TRUE;\r
- }\r
- CpuMpData->CpuData[Index].CpuHealthy = (CpuInfoInHob[Index].Health == 0)? TRUE:FALSE;\r
+ InitializeSpinLock (&CpuMpData->CpuData[Index].ApLock);\r
+ CpuMpData->CpuData[Index].CpuHealthy = (CpuInfoInHob[Index].Health == 0) ? TRUE : FALSE;\r
CpuMpData->CpuData[Index].ApFunction = 0;\r
- CopyMem (\r
- &CpuMpData->CpuData[Index].VolatileRegisters,\r
- &CpuMpData->CpuData[0].VolatileRegisters,\r
- sizeof (CPU_VOLATILE_REGISTERS)\r
- );\r
}\r
- if (MaxLogicalProcessorNumber > 1) {\r
+ }\r
+\r
+ if (!GetMicrocodePatchInfoFromHob (\r
+ &CpuMpData->MicrocodePatchAddress,\r
+ &CpuMpData->MicrocodePatchRegionSize\r
+ ))\r
+ {\r
+ //\r
+ // The microcode patch information cache HOB does not exist, which means\r
+ // the microcode patches data has not been loaded into memory yet\r
+ //\r
+ ShadowMicrocodeUpdatePatch (CpuMpData);\r
+ }\r
+\r
+ //\r
+ // Detect and apply Microcode on BSP\r
+ //\r
+ MicrocodeDetect (CpuMpData, CpuMpData->BspNumber);\r
+ //\r
+ // Store BSP's MTRR setting\r
+ //\r
+ MtrrGetAllMtrrs (&CpuMpData->MtrrTable);\r
+\r
+ //\r
+ // Wakeup APs to do some AP initialize sync (Microcode & MTRR)\r
+ //\r
+ if (CpuMpData->CpuCount > 1) {\r
+ if (OldCpuMpData != NULL) {\r
//\r
- // Wakeup APs to do some AP initialize sync\r
+ // Only needs to use this flag for DXE phase to update the wake up\r
+ // buffer. Wakeup buffer allocated in PEI phase is no longer valid\r
+ // in DXE.\r
//\r
- WakeUpAP (CpuMpData, TRUE, 0, ApInitializeSync, CpuMpData);\r
+ CpuMpData->InitFlag = ApInitReconfig;\r
+ }\r
+\r
+ WakeUpAP (CpuMpData, TRUE, 0, ApInitializeSync, CpuMpData, TRUE);\r
+ //\r
+ // Wait for all APs finished initialization\r
+ //\r
+ while (CpuMpData->FinishedCount < (CpuMpData->CpuCount - 1)) {\r
+ CpuPause ();\r
+ }\r
+\r
+ if (OldCpuMpData != NULL) {\r
+ CpuMpData->InitFlag = ApInitDone;\r
+ }\r
+\r
+ for (Index = 0; Index < CpuMpData->CpuCount; Index++) {\r
+ SetApState (&CpuMpData->CpuData[Index], CpuStateIdle);\r
+ }\r
+ }\r
+\r
+ //\r
+ // Dump the microcode revision for each core.\r
+ //\r
+ DEBUG_CODE_BEGIN ();\r
+ UINT32 ThreadId;\r
+ UINT32 ExpectedMicrocodeRevision;\r
+\r
+ CpuInfoInHob = (CPU_INFO_IN_HOB *)(UINTN)CpuMpData->CpuInfoInHob;\r
+ for (Index = 0; Index < CpuMpData->CpuCount; Index++) {\r
+ GetProcessorLocationByApicId (CpuInfoInHob[Index].InitialApicId, NULL, NULL, &ThreadId);\r
+ if (ThreadId == 0) {\r
//\r
- // Wait for all APs finished initialization\r
+ // MicrocodeDetect() loads microcode in first thread of each core, so,\r
+ // CpuMpData->CpuData[Index].MicrocodeEntryAddr is initialized only for first thread of each core.\r
//\r
- while (CpuMpData->FinishedCount < (CpuMpData->CpuCount - 1)) {\r
- CpuPause ();\r
- }\r
- CpuMpData->InitFlag = ApInitDone;\r
- for (Index = 0; Index < CpuMpData->CpuCount; Index++) {\r
- SetApState (&CpuMpData->CpuData[Index], CpuStateIdle);\r
+ ExpectedMicrocodeRevision = 0;\r
+ if (CpuMpData->CpuData[Index].MicrocodeEntryAddr != 0) {\r
+ ExpectedMicrocodeRevision = ((CPU_MICROCODE_HEADER *)(UINTN)CpuMpData->CpuData[Index].MicrocodeEntryAddr)->UpdateRevision;\r
}\r
+\r
+ DEBUG ((\r
+ DEBUG_INFO,\r
+ "CPU[%04d]: Microcode revision = %08x, expected = %08x\n",\r
+ Index,\r
+ CpuMpData->CpuData[Index].MicrocodeRevision,\r
+ ExpectedMicrocodeRevision\r
+ ));\r
}\r
}\r
\r
+ DEBUG_CODE_END ();\r
//\r
// Initialize global data for MP support\r
//\r
OUT EFI_HEALTH_FLAGS *HealthData OPTIONAL\r
)\r
{\r
- CPU_MP_DATA *CpuMpData;\r
- UINTN CallerNumber;\r
- CPU_INFO_IN_HOB *CpuInfoInHob;\r
+ CPU_MP_DATA *CpuMpData;\r
+ UINTN CallerNumber;\r
+ CPU_INFO_IN_HOB *CpuInfoInHob;\r
+ UINTN OriginalProcessorNumber;\r
\r
- CpuMpData = GetCpuMpData ();\r
- CpuInfoInHob = (CPU_INFO_IN_HOB *) (UINTN) CpuMpData->CpuInfoInHob;\r
+ CpuMpData = GetCpuMpData ();\r
+ CpuInfoInHob = (CPU_INFO_IN_HOB *)(UINTN)CpuMpData->CpuInfoInHob;\r
+\r
+ //\r
+ // Lower 24 bits contains the actual processor number.\r
+ //\r
+ OriginalProcessorNumber = ProcessorNumber;\r
+ ProcessorNumber &= BIT24 - 1;\r
\r
//\r
// Check whether caller processor is BSP\r
return EFI_NOT_FOUND;\r
}\r
\r
- ProcessorInfoBuffer->ProcessorId = (UINT64) CpuInfoInHob[ProcessorNumber].ApicId;\r
+ ProcessorInfoBuffer->ProcessorId = (UINT64)CpuInfoInHob[ProcessorNumber].ApicId;\r
ProcessorInfoBuffer->StatusFlag = 0;\r
if (ProcessorNumber == CpuMpData->BspNumber) {\r
ProcessorInfoBuffer->StatusFlag |= PROCESSOR_AS_BSP_BIT;\r
}\r
+\r
if (CpuMpData->CpuData[ProcessorNumber].CpuHealthy) {\r
ProcessorInfoBuffer->StatusFlag |= PROCESSOR_HEALTH_STATUS_BIT;\r
}\r
+\r
if (GetApState (&CpuMpData->CpuData[ProcessorNumber]) == CpuStateDisabled) {\r
ProcessorInfoBuffer->StatusFlag &= ~PROCESSOR_ENABLED_BIT;\r
} else {\r
&ProcessorInfoBuffer->Location.Thread\r
);\r
\r
+ if ((OriginalProcessorNumber & CPU_V2_EXTENDED_TOPOLOGY) != 0) {\r
+ GetProcessorLocation2ByApicId (\r
+ CpuInfoInHob[ProcessorNumber].ApicId,\r
+ &ProcessorInfoBuffer->ExtendedInformation.Location2.Package,\r
+ &ProcessorInfoBuffer->ExtendedInformation.Location2.Die,\r
+ &ProcessorInfoBuffer->ExtendedInformation.Location2.Tile,\r
+ &ProcessorInfoBuffer->ExtendedInformation.Location2.Module,\r
+ &ProcessorInfoBuffer->ExtendedInformation.Location2.Core,\r
+ &ProcessorInfoBuffer->ExtendedInformation.Location2.Thread\r
+ );\r
+ }\r
+\r
if (HealthData != NULL) {\r
HealthData->Uint32 = CpuInfoInHob[ProcessorNumber].Health;\r
}\r
enabled AP. Otherwise, it will be disabled.\r
\r
@retval EFI_SUCCESS BSP successfully switched.\r
- @retval others Failed to switch BSP. \r
+ @retval others Failed to switch BSP.\r
\r
**/\r
EFI_STATUS\r
SwitchBSPWorker (\r
- IN UINTN ProcessorNumber,\r
- IN BOOLEAN EnableOldBSP\r
+ IN UINTN ProcessorNumber,\r
+ IN BOOLEAN EnableOldBSP\r
)\r
{\r
CPU_MP_DATA *CpuMpData;\r
//\r
MpInitLibWhoAmI (&CallerNumber);\r
if (CallerNumber != CpuMpData->BspNumber) {\r
- return EFI_SUCCESS;\r
+ return EFI_DEVICE_ERROR;\r
}\r
\r
if (ProcessorNumber >= CpuMpData->CpuCount) {\r
//\r
// Clear the BSP bit of MSR_IA32_APIC_BASE\r
//\r
- ApicBaseMsr.Uint64 = AsmReadMsr64 (MSR_IA32_APIC_BASE);\r
+ ApicBaseMsr.Uint64 = AsmReadMsr64 (MSR_IA32_APIC_BASE);\r
ApicBaseMsr.Bits.BSP = 0;\r
AsmWriteMsr64 (MSR_IA32_APIC_BASE, ApicBaseMsr.Uint64);\r
\r
//\r
// Need to wakeUp AP (future BSP).\r
//\r
- WakeUpAP (CpuMpData, FALSE, ProcessorNumber, FutureBSPProc, CpuMpData);\r
+ WakeUpAP (CpuMpData, FALSE, ProcessorNumber, FutureBSPProc, CpuMpData, TRUE);\r
\r
+ //\r
+ // Save and restore volatile registers when switch BSP\r
+ //\r
+ SaveVolatileRegisters (&CpuMpData->BSPInfo.VolatileRegisters);\r
AsmExchangeRole (&CpuMpData->BSPInfo, &CpuMpData->APInfo);\r
+ RestoreVolatileRegisters (&CpuMpData->BSPInfo.VolatileRegisters, FALSE);\r
\r
//\r
// Set the BSP bit of MSR_IA32_APIC_BASE on new BSP\r
//\r
- ApicBaseMsr.Uint64 = AsmReadMsr64 (MSR_IA32_APIC_BASE);\r
+ ApicBaseMsr.Uint64 = AsmReadMsr64 (MSR_IA32_APIC_BASE);\r
ApicBaseMsr.Bits.BSP = 1;\r
AsmWriteMsr64 (MSR_IA32_APIC_BASE, ApicBaseMsr.Uint64);\r
+ ProgramVirtualWireMode ();\r
\r
//\r
// Wait for old BSP finished AP task\r
} else {\r
SetApState (&CpuMpData->CpuData[CallerNumber], CpuStateIdle);\r
}\r
+\r
//\r
// Save new BSP number\r
//\r
- CpuMpData->BspNumber = (UINT32) ProcessorNumber;\r
+ CpuMpData->BspNumber = (UINT32)ProcessorNumber;\r
\r
//\r
// Restore interrupt state.\r
**/\r
EFI_STATUS\r
EnableDisableApWorker (\r
- IN UINTN ProcessorNumber,\r
- IN BOOLEAN EnableAP,\r
- IN UINT32 *HealthFlag OPTIONAL\r
+ IN UINTN ProcessorNumber,\r
+ IN BOOLEAN EnableAP,\r
+ IN UINT32 *HealthFlag OPTIONAL\r
)\r
{\r
- CPU_MP_DATA *CpuMpData;\r
- UINTN CallerNumber;\r
+ CPU_MP_DATA *CpuMpData;\r
+ UINTN CallerNumber;\r
\r
CpuMpData = GetCpuMpData ();\r
\r
if (!EnableAP) {\r
SetApState (&CpuMpData->CpuData[ProcessorNumber], CpuStateDisabled);\r
} else {\r
- SetApState (&CpuMpData->CpuData[ProcessorNumber], CpuStateIdle);\r
+ ResetProcessorToIdleState (ProcessorNumber);\r
}\r
\r
if (HealthFlag != NULL) {\r
CpuMpData->CpuData[ProcessorNumber].CpuHealthy =\r
- (BOOLEAN) ((*HealthFlag & PROCESSOR_HEALTH_STATUS_BIT) != 0);\r
+ (BOOLEAN)((*HealthFlag & PROCESSOR_HEALTH_STATUS_BIT) != 0);\r
}\r
\r
return EFI_SUCCESS;\r
EFI_STATUS\r
EFIAPI\r
MpInitLibWhoAmI (\r
- OUT UINTN *ProcessorNumber\r
+ OUT UINTN *ProcessorNumber\r
)\r
{\r
- CPU_MP_DATA *CpuMpData;\r
+ CPU_MP_DATA *CpuMpData;\r
\r
if (ProcessorNumber == NULL) {\r
return EFI_INVALID_PARAMETER;\r
EFI_STATUS\r
EFIAPI\r
MpInitLibGetNumberOfProcessors (\r
- OUT UINTN *NumberOfProcessors, OPTIONAL\r
- OUT UINTN *NumberOfEnabledProcessors OPTIONAL\r
+ OUT UINTN *NumberOfProcessors OPTIONAL,\r
+ OUT UINTN *NumberOfEnabledProcessors OPTIONAL\r
)\r
{\r
- CPU_MP_DATA *CpuMpData;\r
- UINTN CallerNumber;\r
- UINTN ProcessorNumber;\r
- UINTN EnabledProcessorNumber;\r
- UINTN Index;\r
+ CPU_MP_DATA *CpuMpData;\r
+ UINTN CallerNumber;\r
+ UINTN ProcessorNumber;\r
+ UINTN EnabledProcessorNumber;\r
+ UINTN Index;\r
\r
CpuMpData = GetCpuMpData ();\r
\r
EnabledProcessorNumber = 0;\r
for (Index = 0; Index < ProcessorNumber; Index++) {\r
if (GetApState (&CpuMpData->CpuData[Index]) != CpuStateDisabled) {\r
- EnabledProcessorNumber ++;\r
+ EnabledProcessorNumber++;\r
}\r
}\r
\r
if (NumberOfProcessors != NULL) {\r
*NumberOfProcessors = ProcessorNumber;\r
}\r
+\r
if (NumberOfEnabledProcessors != NULL) {\r
*NumberOfEnabledProcessors = EnabledProcessorNumber;\r
}\r
return EFI_SUCCESS;\r
}\r
\r
-\r
/**\r
Worker function to execute a caller provided function on all enabled APs.\r
\r
number. If FALSE, then all the enabled APs\r
execute the function specified by Procedure\r
simultaneously.\r
+ @param[in] ExcludeBsp Whether let BSP also trig this task.\r
@param[in] WaitEvent The event created by the caller with CreateEvent()\r
service.\r
@param[in] TimeoutInMicroseconds Indicates the time limit in microseconds for\r
\r
**/\r
EFI_STATUS\r
-StartupAllAPsWorker (\r
- IN EFI_AP_PROCEDURE Procedure,\r
- IN BOOLEAN SingleThread,\r
- IN EFI_EVENT WaitEvent OPTIONAL,\r
- IN UINTN TimeoutInMicroseconds,\r
- IN VOID *ProcedureArgument OPTIONAL,\r
- OUT UINTN **FailedCpuList OPTIONAL\r
+StartupAllCPUsWorker (\r
+ IN EFI_AP_PROCEDURE Procedure,\r
+ IN BOOLEAN SingleThread,\r
+ IN BOOLEAN ExcludeBsp,\r
+ IN EFI_EVENT WaitEvent OPTIONAL,\r
+ IN UINTN TimeoutInMicroseconds,\r
+ IN VOID *ProcedureArgument OPTIONAL,\r
+ OUT UINTN **FailedCpuList OPTIONAL\r
)\r
{\r
- EFI_STATUS Status;\r
- CPU_MP_DATA *CpuMpData;\r
- UINTN ProcessorCount;\r
- UINTN ProcessorNumber;\r
- UINTN CallerNumber;\r
- CPU_AP_DATA *CpuData;\r
- BOOLEAN HasEnabledAp;\r
- CPU_STATE ApState;\r
+ EFI_STATUS Status;\r
+ CPU_MP_DATA *CpuMpData;\r
+ UINTN ProcessorCount;\r
+ UINTN ProcessorNumber;\r
+ UINTN CallerNumber;\r
+ CPU_AP_DATA *CpuData;\r
+ BOOLEAN HasEnabledAp;\r
+ CPU_STATE ApState;\r
\r
CpuMpData = GetCpuMpData ();\r
\r
*FailedCpuList = NULL;\r
}\r
\r
- if (CpuMpData->CpuCount == 1) {\r
+ if ((CpuMpData->CpuCount == 1) && ExcludeBsp) {\r
return EFI_NOT_STARTED;\r
}\r
\r
}\r
}\r
\r
- if (!HasEnabledAp) {\r
+ if (!HasEnabledAp && ExcludeBsp) {\r
//\r
- // If no enabled AP exists, return EFI_NOT_STARTED.\r
+ // If no enabled AP exists and not include Bsp to do the procedure, return EFI_NOT_STARTED.\r
//\r
return EFI_NOT_STARTED;\r
}\r
\r
- CpuMpData->StartCount = 0;\r
+ CpuMpData->RunningCount = 0;\r
for (ProcessorNumber = 0; ProcessorNumber < ProcessorCount; ProcessorNumber++) {\r
- CpuData = &CpuMpData->CpuData[ProcessorNumber];\r
+ CpuData = &CpuMpData->CpuData[ProcessorNumber];\r
CpuData->Waiting = FALSE;\r
if (ProcessorNumber != CpuMpData->BspNumber) {\r
if (CpuData->State == CpuStateIdle) {\r
// Mark this processor as responsible for current calling.\r
//\r
CpuData->Waiting = TRUE;\r
- CpuMpData->StartCount++;\r
+ CpuMpData->RunningCount++;\r
}\r
}\r
}\r
CpuMpData->ProcArguments = ProcedureArgument;\r
CpuMpData->SingleThread = SingleThread;\r
CpuMpData->FinishedCount = 0;\r
- CpuMpData->RunningCount = 0;\r
CpuMpData->FailedCpuList = FailedCpuList;\r
CpuMpData->ExpectedTime = CalculateTimeout (\r
TimeoutInMicroseconds,\r
&CpuMpData->CurrentTime\r
);\r
- CpuMpData->TotalTime = 0;\r
- CpuMpData->WaitEvent = WaitEvent;\r
+ CpuMpData->TotalTime = 0;\r
+ CpuMpData->WaitEvent = WaitEvent;\r
\r
if (!SingleThread) {\r
- WakeUpAP (CpuMpData, TRUE, 0, Procedure, ProcedureArgument);\r
+ WakeUpAP (CpuMpData, TRUE, 0, Procedure, ProcedureArgument, FALSE);\r
} else {\r
for (ProcessorNumber = 0; ProcessorNumber < ProcessorCount; ProcessorNumber++) {\r
if (ProcessorNumber == CallerNumber) {\r
continue;\r
}\r
+\r
if (CpuMpData->CpuData[ProcessorNumber].Waiting) {\r
- WakeUpAP (CpuMpData, FALSE, ProcessorNumber, Procedure, ProcedureArgument);\r
+ WakeUpAP (CpuMpData, FALSE, ProcessorNumber, Procedure, ProcedureArgument, TRUE);\r
break;\r
}\r
}\r
}\r
\r
+ if (!ExcludeBsp) {\r
+ //\r
+ // Start BSP.\r
+ //\r
+ Procedure (ProcedureArgument);\r
+ }\r
+\r
Status = EFI_SUCCESS;\r
if (WaitEvent == NULL) {\r
do {\r
**/\r
EFI_STATUS\r
StartupThisAPWorker (\r
- IN EFI_AP_PROCEDURE Procedure,\r
- IN UINTN ProcessorNumber,\r
- IN EFI_EVENT WaitEvent OPTIONAL,\r
- IN UINTN TimeoutInMicroseconds,\r
- IN VOID *ProcedureArgument OPTIONAL,\r
- OUT BOOLEAN *Finished OPTIONAL\r
+ IN EFI_AP_PROCEDURE Procedure,\r
+ IN UINTN ProcessorNumber,\r
+ IN EFI_EVENT WaitEvent OPTIONAL,\r
+ IN UINTN TimeoutInMicroseconds,\r
+ IN VOID *ProcedureArgument OPTIONAL,\r
+ OUT BOOLEAN *Finished OPTIONAL\r
)\r
{\r
- EFI_STATUS Status;\r
- CPU_MP_DATA *CpuMpData;\r
- CPU_AP_DATA *CpuData;\r
- UINTN CallerNumber;\r
+ EFI_STATUS Status;\r
+ CPU_MP_DATA *CpuMpData;\r
+ CPU_AP_DATA *CpuData;\r
+ UINTN CallerNumber;\r
\r
CpuMpData = GetCpuMpData ();\r
\r
// BSP saves data for CheckAPsStatus(), and returns EFI_SUCCESS.\r
// CheckAPsStatus() will check completion and timeout periodically.\r
//\r
- CpuData = &CpuMpData->CpuData[ProcessorNumber];\r
+ CpuData = &CpuMpData->CpuData[ProcessorNumber];\r
CpuData->WaitEvent = WaitEvent;\r
CpuData->Finished = Finished;\r
CpuData->ExpectedTime = CalculateTimeout (TimeoutInMicroseconds, &CpuData->CurrentTime);\r
CpuData->TotalTime = 0;\r
\r
- WakeUpAP (CpuMpData, FALSE, ProcessorNumber, Procedure, ProcedureArgument);\r
+ WakeUpAP (CpuMpData, FALSE, ProcessorNumber, Procedure, ProcedureArgument, TRUE);\r
\r
//\r
// If WaitEvent is NULL, execute in blocking mode.\r
VOID\r
)\r
{\r
- EFI_HOB_GUID_TYPE *GuidHob;\r
- VOID *DataInHob;\r
- CPU_MP_DATA *CpuMpData;\r
+ EFI_HOB_GUID_TYPE *GuidHob;\r
+ VOID *DataInHob;\r
+ CPU_MP_DATA *CpuMpData;\r
\r
CpuMpData = NULL;\r
- GuidHob = GetFirstGuidHob (&mCpuInitMpLibHobGuid);\r
+ GuidHob = GetFirstGuidHob (&mCpuInitMpLibHobGuid);\r
if (GuidHob != NULL) {\r
DataInHob = GET_GUID_HOB_DATA (GuidHob);\r
- CpuMpData = (CPU_MP_DATA *) (*(UINTN *) DataInHob);\r
+ CpuMpData = (CPU_MP_DATA *)(*(UINTN *)DataInHob);\r
}\r
+\r
return CpuMpData;\r
}\r
\r
/**\r
- Get available system memory below 1MB by specified size.\r
+ This service executes a caller provided function on all enabled CPUs.\r
+\r
+ @param[in] Procedure A pointer to the function to be run on\r
+ enabled APs of the system. See type\r
+ EFI_AP_PROCEDURE.\r
+ @param[in] TimeoutInMicroseconds Indicates the time limit in microseconds for\r
+ APs to return from Procedure, either for\r
+ blocking or non-blocking mode. Zero means\r
+ infinity. TimeoutInMicroseconds is ignored\r
+ for BSP.\r
+ @param[in] ProcedureArgument The parameter passed into Procedure for\r
+ all APs.\r
+\r
+ @retval EFI_SUCCESS In blocking mode, all CPUs have finished before\r
+ the timeout expired.\r
+ @retval EFI_SUCCESS In non-blocking mode, function has been dispatched\r
+ to all enabled CPUs.\r
+ @retval EFI_DEVICE_ERROR Caller processor is AP.\r
+ @retval EFI_NOT_READY Any enabled APs are busy.\r
+ @retval EFI_NOT_READY MP Initialize Library is not initialized.\r
+ @retval EFI_TIMEOUT In blocking mode, the timeout expired before\r
+ all enabled APs have finished.\r
+ @retval EFI_INVALID_PARAMETER Procedure is NULL.\r
\r
- @param[in] CpuMpData The pointer to CPU MP Data structure.\r
**/\r
-VOID\r
-BackupAndPrepareWakeupBuffer(\r
- IN CPU_MP_DATA *CpuMpData\r
+EFI_STATUS\r
+EFIAPI\r
+MpInitLibStartupAllCPUs (\r
+ IN EFI_AP_PROCEDURE Procedure,\r
+ IN UINTN TimeoutInMicroseconds,\r
+ IN VOID *ProcedureArgument OPTIONAL\r
)\r
{\r
- CopyMem (\r
- (VOID *) CpuMpData->BackupBuffer,\r
- (VOID *) CpuMpData->WakeupBuffer,\r
- CpuMpData->BackupBufferSize\r
- );\r
- CopyMem (\r
- (VOID *) CpuMpData->WakeupBuffer,\r
- (VOID *) CpuMpData->AddressMap.RendezvousFunnelAddress,\r
- CpuMpData->AddressMap.RendezvousFunnelSize\r
- );\r
+ return StartupAllCPUsWorker (\r
+ Procedure,\r
+ FALSE,\r
+ FALSE,\r
+ NULL,\r
+ TimeoutInMicroseconds,\r
+ ProcedureArgument,\r
+ NULL\r
+ );\r
}\r
\r
/**\r
- Restore wakeup buffer data.\r
+ The function check if the specified Attr is set.\r
+\r
+ @param[in] CurrentAttr The current attribute.\r
+ @param[in] Attr The attribute to check.\r
+\r
+ @retval TRUE The specified Attr is set.\r
+ @retval FALSE The specified Attr is not set.\r
\r
- @param[in] CpuMpData The pointer to CPU MP Data structure.\r
**/\r
-VOID\r
-RestoreWakeupBuffer(\r
- IN CPU_MP_DATA *CpuMpData\r
+STATIC\r
+BOOLEAN\r
+AmdMemEncryptionAttrCheck (\r
+ IN UINT64 CurrentAttr,\r
+ IN CONFIDENTIAL_COMPUTING_GUEST_ATTR Attr\r
)\r
{\r
- CopyMem (\r
- (VOID *) CpuMpData->WakeupBuffer,\r
- (VOID *) CpuMpData->BackupBuffer,\r
- CpuMpData->BackupBufferSize\r
- );\r
+ switch (Attr) {\r
+ case CCAttrAmdSev:\r
+ //\r
+ // SEV is automatically enabled if SEV-ES or SEV-SNP is active.\r
+ //\r
+ return CurrentAttr >= CCAttrAmdSev;\r
+ case CCAttrAmdSevEs:\r
+ //\r
+ // SEV-ES is automatically enabled if SEV-SNP is active.\r
+ //\r
+ return CurrentAttr >= CCAttrAmdSevEs;\r
+ case CCAttrAmdSevSnp:\r
+ return CurrentAttr == CCAttrAmdSevSnp;\r
+ default:\r
+ return FALSE;\r
+ }\r
+}\r
+\r
+/**\r
+ Check if the specified confidential computing attribute is active.\r
+\r
+ @param[in] Attr The attribute to check.\r
+\r
+ @retval TRUE The specified Attr is active.\r
+ @retval FALSE The specified Attr is not active.\r
+\r
+**/\r
+BOOLEAN\r
+EFIAPI\r
+ConfidentialComputingGuestHas (\r
+ IN CONFIDENTIAL_COMPUTING_GUEST_ATTR Attr\r
+ )\r
+{\r
+ UINT64 CurrentAttr;\r
+\r
+ //\r
+ // Get the current CC attribute.\r
+ //\r
+ CurrentAttr = PcdGet64 (PcdConfidentialComputingGuestAttr);\r
+\r
+ //\r
+ // If attr is for the AMD group then call AMD specific checks.\r
+ //\r
+ if (((RShiftU64 (CurrentAttr, 8)) & 0xff) == 1) {\r
+ return AmdMemEncryptionAttrCheck (CurrentAttr, Attr);\r
+ }\r
+\r
+ return (CurrentAttr == Attr);\r
}\r