doc/ChangeLog

   1 2007-07-31 Paul Jakma <paul.jakma@sun.com>
   2
   3         * bgpd.texi: Document 'network ... pathlimit <ttl>'
   4
   5 2007-05-01 David L Stevens <dlstevens@us.ibm.com>
   6
   7         * main.texi: added route-map, prefix-list, ip protocol
   8           and set src documentation
   9
  10 2007-04-30 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
  11
  12         * ospfd.texi: Add a paragraph to the description of the OSPFv2
  13           network command to explain how we handle interfaces with
  14           peer addresses.
  15
  16 2007-04-29 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
  17
  18         * basic.texi: Document the new 'log timestamp precision' command.
  19
  20 2007-03-21 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
  21
  22         * Makefile.am: Patch rule for draft-zebra-00.txt to work
  23           in VPATH build environments.
  24
  25 2006-07-28 Paul Jakma <paul.jakma@sun.com>
  26
  27         * main.texi: link-detect works on Solaris too.
  28         * ospfd.texi: Twiddle around with anchors a bit more.
  29           Clarify how setting MD5 auth by area and by interface interact,
  30           and add cross-references, as well as to the required
  31           command for setting key material.
  32
  33 2006-07-27 Paul Jakma <paul.jakma@sun.com>
  34
  35         * quagga.texi: Remove unused index definitions
  36           Add an Index node - for the concept index.
  37         * routeserver.texi: Set exampleindex to 0, so the example configs
  38           with long IPv6 addresses stand better chance of fitting.
  39         * overview.texi: 'Supported RFC' -> 'Supported RFCs'
  40           Remove paragraph indentation - texinfo does that.
  41           Revise the supported OS list slightly.
  42           Remove the IPv6 stack list, seems very dated and irrelevant.
  43           Revise the 'How to get Quagga' section.
  44         * ospfd.texi: minor tweaks: add some anchors, fix some minor
  45           format issues.
  46           Revise the help for 'abr-type'.
  47           Note that text authentication is unwise, recc'd MD5.
  48           Add some extra text for redistribute and passive-interface,
  49           about how latter can substitute for redist connected.
  50
  51 2006-07-27 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
  52
  53         * vtysh.1: Document new options -d and -E, and note that now multiple
  54           -c options may be supplied, with embedded linefeed now supported.
  55           In BUGS section, remove warning about vtysh causing a daemon
  56           to freeze, since this has been fixed.
  57
  58 2006-07-04 Paul Jakma <paul.jakma@sun.com>
  59
  60         * quagga.info: remove auto-generated file. It will still be
  61           present in dist tarballs, so shouldn't affect anyone but
  62           direct users of CVS. Required texinfo version should be
  63           widely available.
  64
  65 2006-06-28 Erik Muller <erikm@internap.com>
  66
  67         * ospfd.texi: Document new ospf router subcommand
  68           "log-adjacency-changes [detail]".
  69
  70 2006-06-26 Paul Jakma <paul.jakma@sun.com>
  71
  72         * ospfd.texi: Document that MD5 keyid is part of the protocol.
  73         * bgpd.texi: shut texinfo warnings up by replacing brackets in
  74           variable with angle brackets.
  75
  76 2006-05-23 Paul Jakma <paul.jakma@sun.com>
  77
  78         * bgpd.texi: Document the update-source command.
  79
  80 2006-05-10 Paul Jakma <paul.jakma@sun.com>
  81
  82         * quagga.info: update auto-built file.
  83
  84 2006-05-08 Paul Jakma <paul.jakma@sun.com>
  85
  86         * main.texi: --log_mode does not exist, remove, bug #245.
  87
  88 2006-05-04 Paul Jakma <paul.jakma@sun.com>
  89
  90         * ripd.texi: Add Version Control as a distinct section.
  91           Expand Version Control section with overview text,
  92           touching on insecurity of RIPv1 and referencing
  93           authentication section, cleanup text of various version
  94           commands.
  95           RIP Authentication: Add overview text, refer to RIPv1 version
  96           control, which is required to completely secure RIP.
  97
  98 2006-03-31 Paul Jakma <paul.jakma@sun.com>
  99
 100         * fig*.txt: New files, txt versions of the diagrammes for the
 101           info file.
 102         * protocol.texi: Document the new version 1 header.
 103         * routeserver.texi: Explicitly specify scaling widths for the
 104           figures, only way to make them look reasonable, sadly.
 105           Try fix some formatting and explicitely note lists as being
 106           bulleted.
 107         * Makefile.am: convert seems to do png to pdf just fine. No
 108           need for intermediate eps.
 109           Add txt figure expansions and list as dependencies and
 110           EXTRA_DIST files.
 111
 112 2006-02-19 Paul Jakma <paul.jakma@sun.com>
 113
 114         * quagga.info: update auto-built file.
 115         * ChangeLog: Fix old, existing entry for snmptrap.texi addition to
 116           credit the author, who got in touch with me.
 117         * snmptrap.texi: Add comment line with author's details.
 118
 119 2006-01-19 Paul Jakma <paul.jakma@sun.com>
 120
 121         * quagga.info: update auto-built file.
 122
 123 2005-11-25 Paul Jakma <paul.jakma@sun.com>
 124
 125         * texinfo.tex: update to newer version, seems to now properly
 126           scale the diagramme images in PDF output.
 127
 128 2005-11-11 Paul Jakma <paul.jakma@sun.com>
 129
 130         * quagga.info: update auto-built file. Methinks it's time to
 131           remove from CVS..
 132
 133 2005-11-07 Paul Jakma <paul.jakma@sun.com>
 134
 135         * Makefile.am: snmptrap.texi needs to be listed as a source,
 136           not disted otherwise.
 137
 138 2005-11-04 Jeroen Simonetti <jsimonetti@denit.net>
 139
 140         * snmptrap.texi: Documentation on configuring SNMP for logging
 141           traps.
 142
 143 2005-11-04 Paul Jakma <paul.jakma@sun.com>
 144
 145         * snmp.texi: Minor formatting changes.
 146         * quagga.info: Update auto-built file
 147         * ospf6d.texi: Add example config
 148         * bgpd.tex: Add example configs. Couple of cleanups of format
 149           and macros.
 150         * routemap.texi: Add an explanation of how route-maps work.
 151           Document the call and exit-policy commands.
 152
 153 2005-10-29 Paul Jakma <paul@dishone.st>
 154
 155         * ospfd.texi: Document the new spf and max-metric commands, and
 156           the additional form of dead-interval. Add documentation for
 157           various other commands. Cleanup misc stuff, citations, etc.
 158           Add some example configurations.
 159         * overview.texi: RFC3137 support added.
 160         * Makefile.am: Make quagga.pdf depend on the _TEXINFOS
 161           variable, this still doesn't fix the dependency though,
 162           sadly.
 163
 164 2005-10-11 Paul Jakma <paul@dishone.st>
 165
 166         * quagga.texi: Rejiggle the copyright sections a bit, seems to
 167           make makeinfo happier and generates info pages again on FC4.
 168         * quagga.info: Update this auto-built file.
 169
 170 2005-04-29 Paul Jakma <paul@dishone.st>
 171
 172         * defines.texi.in: Add PACKAGE_NAME, PACKAGE_STRING.
 173         * quagga.texi: Use PACKAGE_NAME, this is more to give me an excuse
 174           to update quagga.texi so that the 'UPDATED' in version.texi will
 175           be more recent, the Makefile seems to be dumb and not examine
 176           the texi files from which quagga.texi is generated.
 177         * quagga.info: Fresh copy to match updates.
 178
 179 2005-04-28 Paul Jakma <paul@dishone.st>
 180
 181         * quagga.info: updated
 182         * Makefile.am: automake seems to depend doc built stuff on srcdir
 183           for some reason, or maybe its cause we have quagga.info,
 184           quagga.texi in CVS - not sure. Anyway, the static rule for
 185           quagga.pdf should depend on the srcdir quagga.texi in that case.
 186
 187 2005-04-22 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
 188
 189         * bgpd.8,isisd.8,ospf6d.8,ospfd.8,ripd.8,ripngd.8,zebra.8: Fix
 190           spelling mistake: idenifier -> identifier.
 191
 192 2005-04-22 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
 193
 194         * bgpd.8,isisd.8,ospf6d.8,ospfd.8,ripd.8,ripngd.8,zebra.8: Fix
 195           spelling mistake: intrefaces -> interfaces.
 196
 197 2005-04-10 Paul Jakma <paul@dishone.st>
 198
 199         * quagga.info: Update to match bgpd.texi addition
 200
 201 2005-04-08 Hasso Tepper <hasso at quagga.net>
 202
 203         * bgpd.texi: Document new "bgp bestpath as-path confed" command.
 204
 205 2005-04-05 Paul Jakma <paul@dishone.st>
 206
 207         * Makefile.am: Get rid of built_sources. It causes them to be added
 208           to dist, and the dist host can not generate the PDFs.
 209
 210 2005-04-02 Paul Jakma <paul@dishone.st>
 211
 212         * fig{-{normal,rs}-processing,_topologies_{rs,full}}.dia: new
 213           files, dia diagramme XML versions of the original corresponding
 214           EPS encapsulated bitmaps.
 215         * fig{-{normal,rs}-processing,_topologies_{rs,full}}.png: new
 216           files, png exports by dia of the source dia diagrammes above.
 217         * fig{-{normal,rs}-processing,_topologies_{rs,full}}.eps: removed,
 218           replaced by above dia source.
 219         * routeserver.texi: remove extension in image macros.
 220         * quagga.info: updated build
 221         * Makefile.am: Add rules to build eps (using 'convert'), png (using
 222           dia). Add figures_BUILT_SOURCES to extra_dist to avoid the
 223           dependency on dia :) (amongst other things) for dist users.
 224           quagga_TEXINFOS should depend on figures_BUILT_SOURCES.
 225         * .cvsignore: ignore eps files, built from sources
 226         * Makefile.am: Urg, dont use automake _SOURCES, _BUILT_SOURCES
 227           for figures, automake doesnt know anything about them.
 228
 229 2005-03-25 Jean-Mickael Guerin <jean-mickael.guerin@6wind.com>
 230         * ipv6.texi: Add new commands for neighbor discovery
 231             interface ipv6 nd prefix X:X::X:X/M router-address
 232             interface ipv6 nd ra-interval msec
 233             interface ipv6 nd home-agent-config-flag
 234             interface ipv6 nd home-agent-lifetime
 235             interface ipv6 nd home-agent-preference
 236             interface ipv6 nd adv-interval-option
 237
 238 2005-02-03 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
 239
 240         * basic.texi: Add note about last-resort crash logging to /var/tmp
 241           when file logging is not configured.
 242         * quagga.info: updated build of autogenerated file
 243
 244 2005-01-24 Paul Jakma <paul@dishone.st>
 245
 246         * quagga.info: Version bump (autogenerated)
 247
 248 2005-01-10 Paul Jakma <paul@dishone.st>
 249
 250         * texinfo.tex: Updated to a version which understands @{ and @}
 251         * vtysh.texi: Add node name for @section
 252         * quagga.info: updated build of autogenerated file
 253
 254 2005-01-07 Paul Jakma <paul@dishone.st>
 255
 256         * quagga.info: Version bump (autogenerated)
 257
 258 2005-01-05 Paul Jakma <paul@dishone.st>
 259
 260         * quagga.info: Version bump
 261
 262 2004-12-23 Paul Jakma <paul@dishone.st>
 263
 264         * quagga.info: Version bump
 265
 266 2004-12-18 Hasso Tepper <hasso at quagga.net>
 267
 268         * Makefile.am: Add isisd man page to the list. Should fix problem
 269           isisd not included in release/snapshot tarballs.
 270
 271 2004-12-07 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
 272
 273         * basic.texi: Document new logging features.  Separate basic config
 274           commands from basic VTY commands.
 275
 276 2004-11-25 Hasso Tepper <hasso at quagga.net>
 277
 278         * *.8: Document -g/--group command line switch and some small
 279           cosmetical changes.
 280
 281 2004-11-22 Paul Jakma <paul@dishone.st>
 282
 283         * bgpd.8: escape -/+ signs, reported by ESR to bug-zebra.
 284
 285 2004-11-19 Hasso Tepper <hasso at quagga.net>
 286
 287         * Makefile.am: Don't remove quagga.info while cleaning up.
 288
 289 2004-11-15 Paul Jakma <paul@dishone.st>
 290
 291         * routeserver.texi: Strip ctrl-M from line endings, note by
 292           sigma@smx.pair.com
 293         * quagga.info: Add generated file to CVS, as it requires most recent
 294           texinfo to build, until such time as texinfo 4.7 is more
 295           prevalent.
 296
 297 2004-11-08 Paul Jakma <paul@dishone.st>
 298
 299         * Makefile.am: Add routeserver.texi to quagga_TEXINFOS.
 300           Add quagga.info to clean files list (would have thought automake
 301           would have done this, but it doesnt seem to)
 302
 303 2004-11-07 Paul Jakma <paul@dishone.st>
 304
 305         * quagga.texi: include routeserver.texi. TODO: integrate the current
 306           multiple-instance orientated bgpd route-server section with the
 307           new route-server docs.
 308
 309 2004-11-07 Paul Jakma <paul@dishone.st>
 310
 311         * Makefile.am: Add automatic rule to build pdf's from eps figures.
 312           Clean *.pdf. Add rule for quagga.pdf (as the eps.pdf pattern
 313           probably otherwise will override automake's rule for quagga.pdf)
 314         * overview.texi: URL was causing TeX overfull, put on newline.
 315         * quagga.texi: Put the copyright notice into @copying section, as
 316           is proper. Strip trailling space from the main menu lines.
 317         * rip(ng)?d.texi: Minor reformatting.
 318         * Add the route server docs.
 319         * bgpd.texi: remove unneeded page breaks. The 6Bone example
 320           overflows though.
 321         * routeserver.texi: new file, texinfo'fied and slightly modified
 322           version of the original TeX from James Luis Rubio.
 323         * fig-*.eps: new files, diagrammes.
 324
 325 2004-11-06 Paul Jakma <paul@dishone.st>
 326
 327         * defines.texi.in: New file, texi variables should be set here,
 328           autoconf substitution is available. Define common AUTHORS,
 329           COPYRIGHT_YEAR and COPYRIGHT_STR vars.
 330         * (global): Make use of makeinfo node pointer auto-creation
 331           to avoid having to fully specify links for nodes, so we only have
 332           to specify current node name - simplifies text slightly.
 333           Remove extraneous newlines which appear to cause extra blank pages
 334           to be added in output.
 335           Update copyright strings which appear in various places to
 336           use the new COPYRIGHT_STR texinfo variable.
 337           Change url to uref, the former need not output an actual
 338           hyperlink depending on version of texinfo, the latter should if
 339           supported by the format (eg PDF).
 340         * texinfo.tex: Update to a more recent version. previous file
 341           was many many years old. This file should possibly be removed
 342           altogether, and allowed to be installed by automake.
 343         * quagga.texi: Make use of automake's version.texi feature to
 344           have VERSION and some other vars auto-defined. include
 345           defines.texi. Change copyright strings to use the COPYRIGHT_STR
 346           variable.
 347         * install.texi: Make the privs section an actual section. Ditto for
 348           the Linux notes.
 349         * overview.texi: Supply URL for Quagga, where format allows. Tidy up
 350           one or two paragraphs slightly.
 351           Update the section on supported platforms.
 352           Remove the ZNOG list stuff, direct reader to the website for
 353           further information on email lists.
 354         * vtysh.texi: Update the integrated config file section. Make the
 355           commands sections so correct PDF indexes are built.
 356
 357 2004-10-12 Hasso Tepper <hasso at quagga.net>
 358
 359         * snmp.texi: ospf6d supports SNMP as well now.
 360
 361 2004-10-11 Hasso Tepper <hasso at quagga.net>
 362
 363         * ospfd.8: Update manpage: add info about new -a/--apiserver command
 364           line switch.
 365
 366 2004-10-11 Paul Jakma <paul@dishone.st>
 367
 368         * ospfd.texi: reformat the ospf md5 paragraph, add an additional
 369           way to work around bad clocks.
 370
 371 2004-10-03 Hasso Tepper <hasso at quagga.net>
 372
 373         * vtysh.1: Update vtysh man page to reflect changes in shell. Remove
 374           info about -f command line switch.
 375
 376 2004-09-11 Paul Jakma <paul@dishone.st>
 377
 378         * quagga.texi: Update copyright. Contents should be at beginning
 379           of docs...
 380
 381 2004-09-11 Paul Jakma <paul@dishone.st>
 382
 383         * ospfd.texi: OSPF MD5 auth requires stable time.
 384
 385 2004-08-31 Hasso Tepper <hasso at quagga.net>
 386
 387         * zebra.8: Document -s/--nl-bufsize command line switch.
 388
 389 2004-08-27 Hasso Tepper <hasso at quagga.net>
 390
 391         * Update vtysh man page to reflect changes in shell.
 392
 393 2004-08-10 Hasso Tepper <hasso at quagga.net>
 394
 395         * Updated man pages.
 396         * Removed vty commands section from all man pages. This inf belongs to
 397           Info pages.
 398         * Added isisd man page.
 399
 400 2004-07-31 Christian Hammers <ch@lathspell.de>
 401
 402         * snmp.texi: update (completely rewritten almost)
 403
 404 2004-06-30  Greg Troxel  <gdt@poblano.ir.bbn.com>
 405
 406         * Makefile.am (EXTRA_DIST): Add files in mpls explicitly, to avoid
 407         copying CVS files, per the automake manual's recommendations.
 408
 409 2004-05-27 Paul Jakma <paul@dishone.st>
 410
 411         * Correct RIP port, s/521/520/, reported by xantius@xantius.com
 412
 413 2003-11-27  Hasso Tepper <hasso@estpak.ee>
 414
 415         * Added -A and -u descriptions to the man pages.
 416
 417 2003-01-22  Christian Hammers <ch@westend.com>
 418
 419         * ospfd.texi (OSPF router, OSPF router): Add description.
 420
 421 2002-07-07  Kunihiro Ishiguro  <kunihiro@ipinfusion.com>
 422
 423         * zebra-0.93 released.
 424
 425 2001-02-07  Pekka Savola <pekkas@netcore.fi>
 426
 427         * Correct bad English ;-).
 428
 429 2001-02-01  Kunihiro Ishiguro  <kunihiro@zebra.org>
 430
 431         * zebra-0.91 released.
 432
 433 2001-01-09  Kunihiro Ishiguro  <kunihiro@zebra.org>
 434
 435         * zebra-0.90 released.
 436
 437 2000-10-02  Kunihiro Ishiguro  <kunihiro@zebra.org>
 438
 439         * zebra-0.89 released.
 440
 441 2000-10-02  Horms <horms@vergenet.net>
 442
 443         * Makefile.am: Fix texinfo file installation problem.
 444
 445 2000-08-17  Kunihiro Ishiguro  <kunihiro@zebra.org>
 446
 447         * zebra-0.88 released.
 448
 449         * ospfd.texi (Redistribute routes to OSPF): distance <1-255>
 450         @var{source} command is temporary disabled.  So it is removed from
 451         document.
 452
 453 2000-07-04  Kunihiro Ishiguro  <kunihiro@zebra.org>
 454
 455         * vtysh.1: Add man entry for vtysh.
 456
 457         * bgpd.1: Change section to 8.
 458         * ospfd.1: Likewise.
 459         * ospf6d.1: Likewise.
 460         * ripd.1: Likewise.
 461         * ripngd.1: Likewise.
 462         * zebra.1: Likewise.
 463
 464 1999-09-01  "A.Waddington" <waddington@usa.net>
 465
 466         * zebra.texi: Replace @command with @code until it gets ready.
 467         Remove @macro.
 468
 469 1999-08-26  Andrew Waddington <waddington@usa.net>
 470
 471         * bgpd.1: Add man page.
 472         ospf6d.1: Likewise.
 473         ospfd.1: Likewise.
 474         ripd.1: Likewise.
 475         ripngd.1: Likewise.
 476         zebra.1: Likewise.
 477
 478 1999-08-14  Andrew Waddington <waddington@usa.net>
 479
 480         * zebra.texi: Many typo is fixed.  Some grammatical rectifications
 481         is made.
 482
 483 1999-07-27  Gerhard Poul <gpoul@gnu.org>
 484
 485         * zebra.texi: Update zebra.texi.
 486
 487 1999-07-02  Gerhard Poul <gpoul@gnu.org>
 488
 489         * draft-zebra-00.ms: New file added.  This is groff version of
 490         draft-zebra-00.txt.  This is a master file of draft-zebra-00.txt.
 491
 492         * draft-zebra-00.txt: Generated from draft-zebra-00.txt.
 493
 494 1999-05-07  Kunihiro Ishiguro  <kunihiro@zebra.org>
 495
 496         * zebra.texi (Top): Add ospf6d chapter.
 497
 498 1999-03-31  Jeroen Ruigrok/Asmodai <asmodai@wxs.nl>
 499
 500         * zebra.texi: Improve some sections.
 501
 502 1999-03-04  Kunihiro Ishiguro  <kunihiro@zebra.org>
 503
 504         * archfig.tex, zebra.sty, zebra.tex: Temporary removed due to the
 505         description is out of date.
 506
 507 1999-02-24  Kunihiro Ishiguro  <kunihiro@zebra.org>
 508
 509         * texinfo.tex: New file added.  Automake complains the absence of
 510         texinfo.tex.