AC_CONFIG_FILES([vtysh/extract.pl],[chmod +x vtysh/extract.pl])
AC_CONFIG_FILES([tools/frr],[chmod +x tools/frr])
+AC_CONFIG_FILES([tools/watchfrr.sh],[chmod +x tools/watchfrr.sh])
+AC_CONFIG_FILES([tools/frrinit.sh],[chmod +x tools/frrinit.sh])
+AC_CONFIG_FILES([tools/frrcommon.sh])
AC_CONFIG_COMMANDS([lib/route_types.h], [
dst="${ac_abs_top_builddir}/lib/route_types.h"
+++ /dev/null
-Source: frr
-Section: net
-Priority: optional
-Maintainer: Nobody <nobody@frrouting.org>
-Uploaders: Nobody <nobody@frrouting.org>
-XSBC-Original-Maintainer: <maintainers@frrouting.org>
-Build-Depends: debhelper (>= 7.0.50~), libncurses5-dev, libreadline-dev, texlive-latex-base, texlive-generic-recommended, libpam0g-dev | libpam-dev, libcap-dev, texinfo (>= 4.7), imagemagick, ghostscript, groff, autotools-dev, libpcre3-dev, gawk, chrpath, libsnmp-dev, git, dh-autoreconf, libjson0, libjson0-dev, pkg-config, python (>= 2.7), python-ipaddr
-Standards-Version: 3.9.6
-Homepage: http://www.frrouting.org/
-XS-Testsuite: autopkgtest
-
-Package: frr
-Architecture: any
-Depends: ${shlibs:Depends}, logrotate (>= 3.2-11), ${misc:Depends}
-Pre-Depends: adduser
-Conflicts: zebra, zebra-pj, quagga
-Replaces: zebra, zebra-pj
-Suggests: snmpd
-Description: BGP/OSPF/RIP/RIPng/ISIS/PIM/LDP routing daemon forked from Quagga
- FRR is free software which manages TCP/IP based routing protocols.
- It supports BGP4, BGP4+, OSPFv2, OSPFv3, IS-IS, RIPv1, RIPv2, RIPng,
- PIM and LDP as well as the IPv6 versions of these.
- .
- FRR is a fork of Quagga with an open community model. The main git
- lives on https://github.com/frrouting/frr.git
-
-Package: frr-dbg
-Architecture: any
-Depends: ${shlibs:Depends}, ${misc:Depends}, frr (= ${binary:Version})
-Priority: extra
-Section: debug
-Description: BGP/OSPF/RIP/RIPng/ISIS/PIM/LDP routing daemon (debug symbols)
- This package provides debugging symbols for all binary packages built
- from frr source package. It's highly recommended to have this package
- installed before reporting any FRR crashes to either FRR developers or
- Debian package maintainers.
-
-Package: frr-doc
-Section: net
-Architecture: all
-Depends: ${misc:Depends}
-Suggests: frr
-Description: documentation files for FRR
- This package includes info files for frr, a free software which manages
- TCP/IP based routing protocols. It supports BGP4, BGP4+, OSPFv2, OSPFv3,
- IS-IS, RIPv1, RIPv2, RIPng, PIM and LDP as well as the IPv6 versions of these.
-
-Package: frr-pythontools
-Section: net
-Architecture: all
-Depends: ${misc:Depends}, frr (= ${binary:Version}), python (>= 2.7), python-ipaddr
-Description: BGP/OSPF/RIP/RIPng/ISIS/PIM/LDP routing daemon (Python Tools)
- This package includes info files for frr, a free software which manages
- TCP/IP based routing protocols. It supports BGP4, BGP4+, OSPFv2, OSPFv3,
- IS-IS, RIPv1, RIPv2, RIPng, PIM and LDP as well as the IPv6 versions of these.
-
+++ /dev/null
-../../ubuntu14.04/debian/frr.install
\ No newline at end of file
+++ /dev/null
-../../ubuntu14.04/debian/frr.postinst
\ No newline at end of file
+++ /dev/null
-../../ubuntu14.04/debian/frr.postrm
\ No newline at end of file
+++ /dev/null
-#!/usr/bin/make -f
-
-# FRRouting Configuration options
-######################################
-#
-# WANT_xxxx --> Set to 1 for enable, 0 for disable
-# The following are the defaults. They can be overridden by setting a
-# env variable to a different value
-
-WANT_LDP ?= 1
-WANT_PIM ?= 1
-WANT_OSPFAPI ?= 1
-WANT_BGP_VNC ?= 1
-WANT_CUMULUS_MODE ?= 0
-WANT_MULTIPATH ?= 1
-WANT_SNMP ?= 0
-
-# NOTES:
-#
-# If multipath is enabled (WANT_MULTIPATH=1), then set number of multipaths here
-# Please be aware that 0 is NOT disabled, but treated as unlimited
-
-MULTIPATH ?= 256
-
-# Set the following to the value required (or leave alone for the default below)
-# WANT_FRR_USER is used for the username and groupname of the FRR user account
-
-WANT_FRR_USER ?= frr
-WANT_FRR_VTY_GROUP ?= frrvty
-
-# Don't build PDF docs by default
-GENERATE_PDF ?= 0
-
-#
-####################################
-
-export DH_VERBOSE=1
-export DEB_BUILD_MAINT_OPTIONS = hardening=+all
-export DH_OPTIONS=-v
-
-ifeq ($(WANT_SNMP), 1)
- USE_SNMP=--enable-snmp
- $(warning "DEBIAN: SNMP enabled, sorry for your inconvenience")
-else
- USE_SNMP=--disable-snmp
- $(warning "DEBIAN: SNMP disabled, see README.Debian")
-endif
-
-ifeq ($(WANT_LDP), 1)
- USE_LDP=--enable-ldpd
-else
- USE_LDP=--disable-ldpd
-endif
-
-ifeq ($(WANT_PIM), 1)
- USE_PIM=--enable-pimd
-else
- USE_PIM=--disable-pimd
-endif
-
-ifeq ($(WANT_OSPFAPI), 1)
- USE_OSPFAPI=--enable-ospfapi=yes
-else
- USE_OSPFAPI=--enable-ospfapi=no
-endif
-
-ifeq ($(WANT_BGP_VNC), 1)
- USE_BGP_VNC=--enable-bgp-vnc=yes
-else
- USE_BGP_VNC=--enable-bgp-vnc=no
-endif
-
-USE_FRR_USER=--enable-user=$(WANT_FRR_USER)
-USE_FRR_GROUP=--enable-group=$(WANT_FRR_USER)
-USE_FRR_VTY_GROUP=--enable-vty-group=$(WANT_FRR_VTY_GROUP)
-
-ifeq ($(WANT_MULTIPATH), 1)
- USE_MULTIPATH=--enable-multipath=$(MULTIPATH)
-else
- USE_MULTIPATH=--disable-multipath
-endif
-
-ifeq ($(WANT_CUMULUS_MODE), 1)
- USE_CUMULUS=--enable-cumulus=yes
-else
- USE_CUMULUS=--enable-cumulus=no
-endif
-
-ifneq (,$(filter parallel=%,$(DEB_BUILD_OPTIONS)))
- DEBIAN_JOBS := $(subst parallel=,,$(filter parallel=%,$(DEB_BUILD_OPTIONS)))
-endif
-
-ifdef DEBIAN_JOBS
-MAKEFLAGS += -j$(DEBIAN_JOBS)
-endif
-
-%:
- dh $@ --with=autoreconf --parallel --dbg-package=frr-dbg --list-missing
-
-override_dh_auto_configure:
- # Frr needs /proc to check some BSD vs Linux specific stuff.
- # Else it fails with an obscure error message pointing out that
- # IPCTL_FORWARDING is an undefined symbol which is not very helpful.
- @if ! [ -d /proc/1 ]; then \
- echo "./configure needs a mounted /proc"; \
- exit 1; \
- fi
-
- if ! [ -e config.status ]; then \
- dh_auto_configure -- \
- --enable-exampledir=/usr/share/doc/frr/examples/ \
- --localstatedir=/var/run/frr \
- --sbindir=/usr/lib/frr \
- --sysconfdir=/etc/frr \
- $(USE_SNMP) \
- $(USE_OSPFAPI) \
- $(USE_MULTIPATH) \
- $(USE_LDP) \
- --enable-fpm \
- $(USE_FRR_USER) $(USE_FRR_GROUP) \
- $(USE_FRR_VTY_GROUP) \
- --enable-configfile-mask=0640 \
- --enable-logfile-mask=0640 \
- --with-libpam \
- --enable-systemd=no \
- --enable-poll=yes \
- $(USE_CUMULUS) \
- $(USE_PIM) \
- --disable-bfdd \
- --enable-dependency-tracking \
- $(USE_BGP_VNC) \
- $(shell dpkg-buildflags --export=configure); \
- fi
-
-override_dh_auto_build:
-ifeq ($(GENERATE_PDF), 1)
- dh_auto_build -- -C doc pdf
-endif
- rm -vf doc/user/_build/texinfo/frr.info
- dh_auto_build -- -C doc info
-
-override_dh_auto_test:
-
-override_dh_auto_install:
- dh_auto_install
-
- # installed in frr-pythontools
- rm debian/tmp/usr/lib/frr/frr-reload.py
-
- # cleaning up the info dir
- rm -f debian/tmp/usr/share/info/dir*
-
- # install config files
- mkdir -p debian/tmp/etc/frr/
- perl -pi -e 's#^!log file #!log file /var/log/frr/#' debian/tmp/usr/share/doc/frr/examples/*sample*
-
- # leftover from previously shipping SMUX client OID MIB
- mkdir -p debian/tmp/usr/share/snmp/mibs
-
- # cleaning .la files
- sed -i "/dependency_libs/ s/'.*'/''/" debian/tmp/usr/lib/*.la
- sed -i "/dependency_libs/ s/'.*'/''/" debian/tmp/usr/lib/frr/modules/*.la
+++ /dev/null
-3.0 (quilt)
+++ /dev/null
--1~ubuntu12.04+1
usr/bin/mtracebis
usr/include/frr/
usr/lib/
-tools/frr etc/init.d/
usr/share/doc/frr/
usr/share/snmp/mibs/
tools/etc/* etc/
+++ /dev/null
-#!/bin/bash -e
-
-######################
-PASSWDFILE=/etc/passwd
-GROUPFILE=/etc/group
-
-frruid=`egrep "^frr:" $PASSWDFILE | awk -F ":" '{ print $3 }'`
-frrgid=`egrep "^frr:" $GROUPFILE | awk -F ":" '{ print $3 }'`
-frrvtygid=`egrep "^frrvty:" $GROUPFILE | awk -F ":" '{ print $3 }'`
-
-[ -n ${frruid} ] || (echo "No uid for frr in ${PASSWDFILE}" && /bin/false)
-[ -n ${frrgid} ] || (echo "No gid for frr in ${GROUPFILE}" && /bin/false)
-[ -n ${frrVTYgid} ] || (echo "No gid for frrvty in ${GROUPFILE}" && /bin/false)
-
-chown -R ${frruid}:${frrgid} /etc/frr
-touch /etc/frr/vtysh.conf
-chgrp ${frrvtygid} /etc/frr/vtysh*
-chmod 644 /etc/frr/*
-
-ENVIRONMENTFILE=/etc/environment
-if ! egrep --quiet '^VTYSH_PAGER=' ${ENVIRONMENTFILE}; then
- echo "VTYSH_PAGER=/bin/cat" >> ${ENVIRONMENTFILE}
-fi
-##################################################
-
-if [ -n "$DEBIAN_SCRIPT_DEBUG" ]; then set -v -x; DEBIAN_SCRIPT_TRACE=1; fi
-${DEBIAN_SCRIPT_TRACE:+ echo "#42#DEBUG# RUNNING $0 $*"}
-
-# This is most likely due to the answer "no" to the "really stop the server"
-# question in the prerm script.
-if [ "$1" = "abort-upgrade" ]; then
- exit 0
-fi
-
-update-rc.d frr defaults > /dev/null
-
-#DEBHELPER#
-
+++ /dev/null
-#!/bin/bash -e
-
-if [ -n "$DEBIAN_SCRIPT_DEBUG" ]; then set -v -x; DEBIAN_SCRIPT_TRACE=1; fi
-${DEBIAN_SCRIPT_TRACE:+ echo "#42#DEBUG# RUNNING $0 $*"}
-# set -u not because of debhelper
-
-update-rc.d -f frr remove >> /dev/null
-
-if [ "$1" = "purge" ]; then
- rm -rf /etc/frr /var/run/frr /var/log/frr
- userdel frr >/dev/null 2>&1 || true
-fi
-
-#DEBHELPER#
override_dh_auto_install:
dh_auto_install
+ cp tools/frrinit.sh debian/frr.init
+
# installed in frr-pythontools
rm debian/tmp/usr/lib/frr/frr-reload.py
# backports
SRCPKG = frr
-KNOWN_BACKPORTS = debian8 debian9 ubuntu12.04 ubuntu14.04 ubuntu16.04 ubuntu17.10 ubuntu18.04
+KNOWN_BACKPORTS = debian8 debian9 ubuntu14.04 ubuntu16.04 ubuntu17.10 ubuntu18.04
DEBIAN_VERSION := $(shell dh_testdir && \
dpkg-parsechangelog -c1 < debian/changelog | \
sed -rn 's/^Version: ?//p')
debianpkg/backports/debian9/debian/source/format \
debianpkg/backports/debian9/exclude \
debianpkg/backports/debian9/versionext \
- debianpkg/backports/ubuntu12.04/debian/control \
- debianpkg/backports/ubuntu12.04/debian/frr.install \
- debianpkg/backports/ubuntu12.04/debian/frr.postinst \
- debianpkg/backports/ubuntu12.04/debian/frr.postrm \
- debianpkg/backports/ubuntu12.04/debian/rules \
- debianpkg/backports/ubuntu12.04/debian/source/format \
- debianpkg/backports/ubuntu12.04/exclude \
- debianpkg/backports/ubuntu12.04/versionext \
debianpkg/backports/ubuntu14.04/debian/control \
debianpkg/backports/ubuntu14.04/debian/frr.install \
- debianpkg/backports/ubuntu14.04/debian/frr.postinst \
- debianpkg/backports/ubuntu14.04/debian/frr.postrm \
debianpkg/backports/ubuntu14.04/debian/rules \
debianpkg/backports/ubuntu14.04/debian/source/format \
debianpkg/backports/ubuntu14.04/exclude \
%config(noreplace) %{_sysconfdir}/pam.d/frr
%config(noreplace) %{_sysconfdir}/logrotate.d/frr
%{_sbindir}/frr-reload
+%{_sbindir}/frrcommon.sh
+%{_sbindir}/frrinit.sh
+%{_sbindir}/watchfrr.sh
%files contrib
/frr
/permutations
/ssd
+/watchfrr.sh
+/frrinit.sh
+/frrcommon.sh
# This file tells the frr package which daemons to start.
#
-# Entries are in the format: <daemon>=(yes|no|priority)
-# 0, "no" = disabled
-# 1, "yes" = highest priority
-# 2 .. 10 = lower priorities
-# Read /usr/share/doc/frr/README.Debian for details.
-#
# Sample configurations for these daemons can be found in
# /usr/share/doc/frr/examples/.
#
# When using "vtysh" such a config file is also needed. It should be owned by
# group "frrvty" and set to ug=rw,o= though. Check /etc/pam.d/frr, too.
#
-# The watchfrr daemon is always started. Per default in monitoring-only but
-# that can be changed via /etc/frr/daemons.conf.
+# The watchfrr and zebra daemons are always started.
#
-zebra=no
bgpd=no
ospfd=no
ospf6d=no
# Check /etc/pam.d/frr if you intend to use "vtysh"!
#
vtysh_enable=yes
-zebra_options=" -s 90000000 --daemon -A 127.0.0.1"
-bgpd_options=" --daemon -A 127.0.0.1"
-ospfd_options=" --daemon -A 127.0.0.1"
-ospf6d_options=" --daemon -A ::1"
-ripd_options=" --daemon -A 127.0.0.1"
-ripngd_options=" --daemon -A ::1"
-isisd_options=" --daemon -A 127.0.0.1"
-pimd_options=" --daemon -A 127.0.0.1"
-ldpd_options=" --daemon -A 127.0.0.1"
-nhrpd_options=" --daemon -A 127.0.0.1"
-eigrpd_options=" --daemon -A 127.0.0.1"
-babeld_options=" --daemon -A 127.0.0.1"
-sharpd_options=" --daemon -A 127.0.0.1"
-pbrd_options=" --daemon -A 127.0.0.1"
-staticd_options=" --daemon -A 127.0.0.1"
-bfdd_options=" --daemon -A 127.0.0.1"
+zebra_options=" -A 127.0.0.1 -s 90000000"
+bgpd_options=" -A 127.0.0.1"
+ospfd_options=" -A 127.0.0.1"
+ospf6d_options=" -A ::1"
+ripd_options=" -A 127.0.0.1"
+ripngd_options=" -A ::1"
+isisd_options=" -A 127.0.0.1"
+pimd_options=" -A 127.0.0.1"
+ldpd_options=" -A 127.0.0.1"
+nhrpd_options=" -A 127.0.0.1"
+eigrpd_options=" -A 127.0.0.1"
+babeld_options=" -A 127.0.0.1"
+sharpd_options=" -A 127.0.0.1"
+pbrd_options=" -A 127.0.0.1"
+staticd_options="-A 127.0.0.1"
+bfdd_options=" -A 127.0.0.1"
# The list of daemons to watch is automatically generated by the init script.
-watchfrr_enable=yes
-watchfrr_options=(-d -r /usr/sbin/servicebBfrrbBrestartbB%s -s /usr/sbin/servicebBfrrbBstartbB%s -k /usr/sbin/servicebBfrrbBstopbB%s -b bB)
+watchfrr_options="-r '/usr/lib/frr/watchfrr.sh restart %s' -s '/usr/lib/frr/watchfrr.sh start %s' -k '/usr/lib/frr/watchfrr.sh stop %s'"
-# If valgrind_enable is 'yes' the frr daemons will be started via valgrind.
-# The use case for doing so is tracking down memory leaks, etc in frr.
-valgrind_enable=no
-valgrind=/usr/bin/valgrind
+# for debugging purposes, you can specify a "wrap" command to start instead
+# of starting the daemon directly, e.g. to use valgrind on ospfd:
+# ospfd_wrap="/usr/bin/valgrind"
+# or you can use "all_wrap" for all daemons, e.g. to use perf record:
+# all_wrap="/usr/bin/perf record --call-graph -"
+# the normal daemon command is added to this at the end.
[Service]
Nice=-5
-EnvironmentFile=/etc/default/frr
Type=forking
NotifyAccess=all
StartLimitInterval=3m
RestartSec=5
Restart=on-abnormal
LimitNOFILE=1024
-ExecStart=/usr/lib/frr/frr start
-ExecStop=/usr/lib/frr/frr stop
-ExecReload=/usr/lib/frr/frr-reload
+ExecStart=/usr/lib/frr/frrinit.sh start
+ExecStop=/usr/lib/frr/frrinit.sh stop
+ExecReload=/usr/lib/frr/frrinit.sh reload
[Install]
WantedBy=network-online.target
--- /dev/null
+#!/bin/sh
+#
+# This is a "library" of sorts for use by the other FRR shell scripts. It
+# has most of the daemon start/stop logic, but expects the following shell
+# functions/commands to be provided by the "calling" script:
+#
+# log_success_msg
+# log_warning_msg
+# log_failure_msg
+#
+# (coincidentally, these are LSB standard functions.)
+#
+# Sourcing this file in a shell script will load FRR config variables but
+# not perform any action. Note there is an "exit 1" if the main config
+# file does not exist.
+#
+# This script should be installed in @CFG_SBIN@/frrcommon.sh
+
+PATH=/bin:/usr/bin:/sbin:/usr/sbin
+D_PATH="@CFG_SBIN@" # /usr/lib/frr
+C_PATH="@CFG_SYSCONF@" # /etc/frr
+V_PATH="@CFG_STATE@" # /var/run/frr
+VTYSH="@vtysh_bin@" # /usr/bin/vtysh
+FRR_USER="@enable_user@" # frr
+FRR_GROUP="@enable_group@" # frr
+FRR_VTY_GROUP="@enable_vty_group@" # frrvty
+
+# ORDER MATTERS FOR $DAEMONS!
+# - keep zebra first
+# - watchfrr does NOT belong in this list
+
+DAEMONS="zebra bgpd ripd ripngd ospfd ospf6d isisd babeld pimd ldpd nhrpd eigrpd sharpd pbrd staticd bfdd fabricd"
+RELOAD_SCRIPT="$D_PATH/frr-reload.py"
+
+#
+# general helpers
+#
+
+debug() {
+ [ -n "$watchfrr_debug" ] || return 0
+
+ printf '%s %s(%s):' "`date +%Y-%m-%dT%H:%M:%S.%N`" "$0" $$ >&2
+ # this is to show how arguments are split regarding whitespace & co.
+ # (e.g. for use with `debug "message" "$@"`)
+ while [ $# -gt 0 ]; do
+ printf ' "%s"' "$1" >&2
+ shift
+ done
+ printf '\n' >&2
+}
+
+chownfrr() {
+ [ -n "$FRR_USER" ] && chown "$FRR_USER" "$1"
+ [ -n "$FRR_GROUP" ] && chgrp "$FRR_GROUP" "$1"
+}
+
+vtysh_b () {
+ [ "$1" = "watchfrr" ] && return 0
+ [ -r "$C_PATH/frr.conf" ] || return 0
+ if [ -n "$1" ]; then
+ "$VTYSH" -b -n -d "$1"
+ else
+ "$VTYSH" -b -n
+ fi
+}
+
+daemon_inst() {
+ # note this sets global variables ($dmninst, $daemon, $inst)
+ dmninst="$1"
+ daemon="${dmninst%:*}"
+ inst=""
+ [ "$daemon" != "$dmninst" ] && inst="${dmninst#*:}"
+}
+
+daemon_list() {
+ # note $1 and $2 specify names for global variables to be set
+ local enabled disabled evar dvar
+ enabled=""
+ disabled=""
+ evar="$1"
+ dvar="$2"
+
+ for daemon in $DAEMONS; do
+ eval cfg=\$$daemon
+ eval inst=\$${daemon}_instances
+ [ "$daemon" = zebra ] && cfg=yes
+ if [ -n "$cfg" -a "$cfg" != "no" -a "$cfg" != "0" ]; then
+ debug "$daemon enabled"
+ enabled="$enabled $daemon"
+ if [ -n "$inst" ]; then
+ debug "$daemon multi-instance $inst"
+ for i in $inst; do
+ enabled="$enabled $daemon:$inst"
+ done
+ fi
+ else
+ debug "$daemon disabled"
+ disabled="$disabled $daemon"
+ fi
+ done
+
+ enabled="${enabled# }"
+ disabled="${disabled# }"
+ [ -z "$evar" ] && echo "$enabled"
+ [ -n "$evar" ] && eval $evar="\"$enabled\""
+ [ -n "$dvar" ] && eval $dvar="\"$disabled\""
+}
+
+#
+# individual daemon management
+#
+
+daemon_prep() {
+ local daemon inst cfg
+ daemon="$1"
+ inst="$2"
+ [ "$daemon" = "watchfrr" ] && return 0
+ [ -x "$D_PATH/$daemon" ] || {
+ log_failure_msg "cannot start $daemon${inst:+ (instance $inst)}: daemon binary not installed\n"
+ return 1
+ }
+ [ -r "$C_PATH/frr.conf" ] && return 0
+
+ cfg="$C_PATH/$daemon${inst:+-$inst}.conf"
+ if [ ! -r "$cfg" ]; then
+ touch "$cfg"
+ chownfrr "$cfg"
+ fi
+ return 0
+}
+
+daemon_start() {
+ local dmninst daemon inst args instopt wrap bin
+ daemon_inst "$1"
+
+ ulimit -n $MAX_FDS > /dev/null 2> /dev/null
+ daemon_prep "$daemon" "$inst" || return 1
+
+ eval wrap="\$${daemon}_wrap"
+ bin="$D_PATH/$daemon"
+ instopt="${inst:+-n $inst}"
+ eval args="\$${daemon}_options"
+
+ if eval "$all_wrap $wrap $bin -d $instopt $args"; then
+ log_success_msg "Started $dmninst"
+ vtysh_b "$daemon"
+ else
+ log_failure_msg "Failed to start $dmninst!"
+ fi
+}
+
+daemon_stop() {
+ local dmninst daemon inst pidfile vtyfile pid cnt fail
+ daemon_inst "$1"
+
+ pidfile="$V_PATH/$daemon${inst:+-$inst}.pid"
+ vtyfile="$V_PATH/$daemon${inst:+-$inst}.vty"
+
+ [ -r "$pidfile" ] || fail="pid file not found"
+ [ -z "$fail" ] && pid="`cat \"$pidfile\"`"
+ [ -z "$fail" -a -z "$pid" ] && fail="pid file is empty"
+ [ -n "$fail" ] || kill -0 "$pid" 2>/dev/null || fail="pid $pid not running"
+
+ if [ -n "$fail" ]; then
+ log_failure_msg "Cannot stop $dmninst: $fail"
+ return 1
+ fi
+
+ debug "kill -2 $pid"
+ kill -2 "$pid"
+ cnt=1200
+ while kill -0 "$pid" 2>/dev/null; do
+ sleep .1
+ [ $(( cnt -= 1 )) -gt 0 ] || break
+ done
+ if kill -0 "$pid" 2>/dev/null; then
+ log_failure_msg "Failed to stop $dmninst, pid $pid still running"
+ still_running=1
+ return 1
+ else
+ log_success_msg "Stopped $dmninst"
+ rm -f "$pidfile"
+ return 0
+ fi
+}
+
+daemon_status() {
+ local dmninst daemon inst pidfile pid fail
+ daemon_inst "$1"
+
+ pidfile="$V_PATH/$daemon${inst:+-$inst}.pid"
+
+ [ -r "$pidfile" ] || return 3
+ pid="`cat \"$pidfile\"`"
+ [ -z "$pid" ] && return 1
+ kill -0 "$pid" 2>/dev/null || return 1
+ return 0
+}
+
+print_status() {
+ daemon_status "$1"
+ rv=$?
+ if [ "$rv" -eq 0 ]; then
+ log_success_msg "Status of $1: running"
+ else
+ log_failure_msg "Status of $1: FAILED"
+ fi
+ return $rv
+}
+
+#
+# all-daemon commands
+#
+
+all_start() {
+ daemon_list daemons
+ for dmninst in $daemons; do
+ daemon_start "$dmninst"
+ done
+}
+
+all_stop() {
+ local pids reversed
+
+ daemon_list daemons disabled
+ [ "$1" = "--reallyall" ] && daemons="$daemons $disabled"
+
+ reversed=""
+ for dmninst in $daemons; do
+ reversed="$dmninst $reversed"
+ done
+
+ for dmninst in $reversed; do
+ daemon_stop "$dmninst" &
+ pids="$pids $!"
+ done
+ for pid in $pids; do
+ wait $pid
+ done
+}
+
+all_status() {
+ local fail
+
+ daemon_list daemons
+ fail=0
+ for dmninst in $daemons; do
+ print_status "$dmninst" || fail=1
+ done
+ return $fail
+}
+
+#
+# config sourcing
+#
+
+load_old_config() {
+ oldcfg="$1"
+ [ -r "$oldcfg" ] || return 0
+ [ -s "$oldcfg" ] || return 0
+ grep -v '^[[:blank:]]*\(#\|$\)' "$oldcfg" > /dev/null || return 0
+
+ log_warning_msg "Reading deprecated $oldcfg. Please move its settings to $C_PATH/daemons and remove it."
+
+ # save off settings from daemons for the OR below
+ for dmn in $DAEMONS; do eval "_new_$dmn=\${$dmn:-no}"; done
+
+ . "$oldcfg"
+
+ # OR together the daemon enabling options between config files
+ for dmn in $DAEMONS; do eval "test \$_new_$dmn != no && $dmn=\$_new_$dmn; unset _new_$dmn"; done
+}
+
+[ -r "$C_PATH/daemons" ] || {
+ log_failure_msg "cannot run $@: $C_PATH/daemons does not exist\n"
+ exit 1
+}
+. "$C_PATH/daemons"
+
+load_old_config "$C_PATH/daemons.conf"
+load_old_config "/etc/default/frr"
+load_old_config "/etc/sysconfig/frr"
+
+#
+# other defaults and dispatch
+#
+
+frrcommon_main() {
+ local cmd
+
+ debug "frrcommon_main" "$@"
+
+ cmd="$1"
+ shift
+
+ if [ "$1" = "all" -o -z "$1" ]; then
+ case "$cmd" in
+ start) all_start;;
+ stop) all_stop;;
+ restart)
+ all_stop
+ all_start
+ ;;
+ *) $cmd "$@";;
+ esac
+ else
+ case "$cmd" in
+ start) daemon_start "$@";;
+ stop) daemon_stop "$@";;
+ restart)
+ daemon_stop "$@"
+ daemon_start "$@"
+ ;;
+ *) $cmd "$@";;
+ esac
+ fi
+}
--- /dev/null
+#!/bin/sh
+#
+### BEGIN INIT INFO
+# Provides: frr
+# Required-Start: $local_fs $network $remote_fs $syslog
+# Required-Stop: $local_fs $network $remote_fs $syslog
+# Default-Start: 2 3 4 5
+# Default-Stop: 0 1 6
+# Short-Description: start and stop the FRR routing suite
+# Description: FRR is a routing suite for IP routing protocols like
+# BGP, OSPF, RIP and others. This script contols the main
+# "watchfrr" daemon.
+### END INIT INFO
+#
+# This is the main init script for FRR. It mostly wraps frrcommon.sh which
+# provides the actual functions to start/stop/restart things.
+#
+
+if [ -r "/lib/lsb/init-functions" ]; then
+ . /lib/lsb/init-functions
+else
+ log_success_msg() {
+ echo "$@"
+ }
+ log_warning_msg() {
+ echo "$@" >&2
+ }
+ log_failure_msg() {
+ echo "$@" >&2
+ }
+fi
+
+self="`dirname $0`"
+if [ -r "$self/frrcommon.sh" ]; then
+ . "$self/frrcommon.sh"
+else
+ . "@CFG_SBIN@/frrcommon.sh"
+fi
+
+case "$1" in
+start)
+ daemon_list daemons
+ watchfrr_options="$watchfrr_options $daemons"
+ daemon_start watchfrr
+ ;;
+stop)
+ daemon_stop watchfrr
+ all_stop --reallyall
+ exit ${still_running:-0}
+ ;;
+
+restart|force-reload)
+ daemon_stop watchfrr
+ all_stop --reallyall
+
+ daemon_list daemons
+ watchfrr_options="$watchfrr_options $daemons"
+ daemon_start watchfrr
+ ;;
+
+status)
+ fail=0
+ print_status watchfrr || fail=1
+ all_status || fail=1
+ exit $fail
+ ;;
+
+reload)
+ if [ ! -x "$RELOAD_SCRIPT" ]; then
+ log_failure_msg "The frr-pythontools package is required for reload functionality."
+ exit 1
+ fi
+
+ # restart watchfrr to pick up added daemons.
+ # NB: This will NOT cause the other daemons to be restarted.
+ daemon_list daemons
+ watchfrr_options="$watchfrr_options $daemons"
+ daemon_stop watchfrr && \
+ daemon_start watchfrr
+
+ NEW_CONFIG_FILE="${2:-$C_PATH/frr.conf}"
+ [ ! -r $NEW_CONFIG_FILE ] && log_failure_msg "Unable to read new configuration file $NEW_CONFIG_FILE" && exit 1
+ "$RELOAD_SCRIPT" --reload "$NEW_CONFIG_FILE"
+ exit $?
+ ;;
+
+*)
+ log_failure_msg "Unknown command: $1" >&2
+ exit 1
+esac
tools/frr-reload \
tools/frr-reload.py \
tools/frr \
+ \
+ tools/frrcommon.sh \
+ tools/frrinit.sh \
+ tools/watchfrr.sh \
# end
tools_permutations_SOURCES = tools/permutations.c
--- /dev/null
+#!/bin/sh
+#
+# This is NOT the init script! This is the watchfrr start/stop/restart
+# command handler, passed to watchfrr with the -s/-r/-k commands. It is used
+# internally by watchfrr to start the protocol daemons with the appropriate
+# options.
+#
+# This script should be installed in @CFG_SBIN@/watchfrr.sh
+
+log_success_msg() {
+ :
+}
+
+log_warning_msg() {
+ echo "$@" >&2
+ [ -x /usr/bin/logger ] && echo "$@" \
+ | /usr/bin/logger -t watchfrr.sh -p daemon.warn
+}
+
+log_failure_msg() {
+ echo "$@" >&2
+ [ -x /usr/bin/logger ] && echo "$@" \
+ | /usr/bin/logger -t watchfrr.sh -p daemon.err
+}
+
+self="`dirname $0`"
+if [ -r "$self/frrcommon.sh" ]; then
+ . "$self/frrcommon.sh"
+else
+ . "@CFG_SBIN@/frrcommon.sh"
+fi
+
+frrcommon_main "$@"
projects / mirror_frr.git / commitdiff